Kerala

AOC

Works

Miscellaneous Works

Upgradation of Sub Centre into Health and Wellness Centre at Panangad, Kumbalam GP, Ernakulam District.

Steel Industrials Kerala Limited

KUMBALAM GP | Ernakulam, Kerala

Amount: ₹5.5 LCloses: 15 Oct 2021Closed

Timeline

Published8 Oct 2021
Closed15 Oct 2021
Technical Evaluation18 Oct 2021
Awarded28 Aug 2026

Bids

Item Rate

3 Bids28 Aug 2026

#	Company	Amount	Rank	Status
1	AAYKAYCONSTRUCTIONS L1₹5.5 LAccepted-AOC	₹5.5 L	L1	Accepted-AOC L1 Accepted for further proceedings
2	GLOBAL CONSTRUCTIONS L2₹5.5 L+₹1,037.65 (0.19%)Rejected-Finance	₹5.5 L+₹1,037.65 (0.19%)	L2	Rejected-Finance L2
3	SHAHEER K A L3₹5.5 L+₹1,458.66 (0.26%)Rejected-Finance	₹5.5 L+₹1,458.66 (0.26%)	L3	Rejected-Finance L3

BoQ Comparative

Line Items (39)

Sl No	Description	Qty	Unit	SHAHEER K A L3	AAYKAYCONSTRUCTIONS L1	GLOBAL CONSTRUCTIONS L2
1.00CIVIL WORKS
1.01	15.7.4 : Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In cement mortar	2.14	cum	1,200 ₹2,568	1,100 ₹2,354 Lowest	1,100 ₹2,354 Lowest
1.02	50.6.1.5 : Solid block masonry using pre cast solid blocks ( Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 Part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand) etc complete	6.49	cum	7,700 ₹49,980.7 Lowest	7,800 ₹50,629.8	7,900 ₹51,278.9
1.03	13.1.1 : 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)	64.89	sqm	320 ₹20,765.12	314 ₹20,375.77 Lowest	350 ₹22,711.85
1.04	13.43.1 : Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer	64.89	sqm	65 ₹4,217.91	60 ₹3,893.46 Lowest	61 ₹3,958.35
1.05	13.60.1 : Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work	64.89	sqm	140 ₹9,084.74	135 ₹8,760.28 Lowest	180 ₹11,680.38
1.06	5.1.3 : Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)	0.17	cum	8,500 ₹1,428 Lowest	9,000 ₹1,512	9,000 ₹1,512
1.07	9.121 : Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross- section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminated shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame.	6	metre	550 ₹3,300	550 ₹3,300	500 ₹3,000 Lowest
1.08	9.122.1 : Providing and fixing to existing door frames.30 mm thick Glas Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS : 14856, including fixing to frames.	1.89	sqm	3,200 ₹6,051.2	3,200 ₹6,051.2	3,100 ₹5,862.1 Lowest
1.09	21.1.1.3 : Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):For fixed portionPolyester powder coated aluminium ( minimum thickness of polyester powder coating 50 micron )	128.5	kg	600 ₹77,100	600 ₹77,100	560 ₹71,960 Lowest

Tender Value

₹5.5 L

EMD Value

₹8,313

Closing Date

15 Oct 2021, 12:00 pmClosed

Tender Inviting Organisation

Name

DEPUTY MANAGER (PEED)

Address

STEEL INDUSTRIALS KERALA LTD. ATHANI P.O THRISSUR- 680 581

Work Description

Upgradation of Sub Centre into Health and Wellness Centre at Panangad, Kumbalam GP, Ernakulam District.

Tender Information

Tender ID

2021_SILK_444146_1

Reference Number

SILK/PEED/S-3677/2021-22/575

Tender Type

Open Tender

Product Category

Miscellaneous Works

Form of Contract

Item Rate

Period of Work

60 days

Location

KUMBALAM GP

Source Website

Subscribe to view

Eligibility / Pre-Qualification

As per tender documents

Documents Required

6 documents required · 6 mandatory

Fee/PreQual/Technical

RequiredSCANNED COPY OF TENDER NOTICE SIGNED AND SEALED (.pdf)

RequiredSCANNED COPY OF GENERAL CONDITIONS OF CONTRACT SIGNED AND SEALED IN ALL PAGES (.pdf)

RequiredSCANNED COPY OF ANY OTHER SUPPORTING DOCUMENT (.pdf)

RequiredPROFILE (.pdf)

RequiredEMPANELMENT CERTIFICATE (.pdf)

Finance

RequiredPRICE BID (.xls)

Fee & Financial Details

Tender Fee Amount

₹1,307

EMD Fee Amount

₹8,313

EMD Fee Exemption Allowed

Yes

Important Dates

Last Activity

28 Aug 2026

Published

8 Oct 2021

Bid Opening

16 Oct 2021

Download Starts

8 Oct 2021

Download Ends

15 Oct 2021

Submission Starts

8 Oct 2021

Clarification Period

8 Oct 2021 - 15 Oct 2021

Stage Documents

Stage Summary Snapshot

stage.html

html • 0.05 MB

Technical Bid Opening

tech_bid_open.pdf

PDF

Technical Evaluation

tech_eval.pdf

PDF

Financial Bid Opening

fin_bid_open.pdf

PDF

boq_comp_chart.xlsx

xlsx

Financial Evaluation

fin_eval.pdf

PDF

Award of Contract

aoc.pdf

PDF

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Company

AAYKAYCONSTRUCTIONS

L1₹5.5 LAccepted-AOC

GLOBAL CONSTRUCTIONS

L2₹5.5 L+₹1,037.65 (0.19%)Rejected-Finance

SHAHEER K A

L3₹5.5 L+₹1,458.66 (0.26%)Rejected-Finance

Sl No	Description	Qty	Unit	SHAHEER K A L3	AAYKAYCONSTRUCTIONS L1	GLOBAL CONSTRUCTIONS L2
1.00CIVIL WORKS
1.01	15.7.4 : Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In cement mortar	2.14	cum	1,200 ₹2,568	1,100 ₹2,354 Lowest	1,100 ₹2,354 Lowest
1.02	50.6.1.5 : Solid block masonry using pre cast solid blocks ( Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 Part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand) etc complete	6.49	cum	7,700 ₹49,980.7 Lowest	7,800 ₹50,629.8	7,900 ₹51,278.9
1.03	13.1.1 : 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)	64.89	sqm	320 ₹20,765.12	314 ₹20,375.77 Lowest	350 ₹22,711.85
1.04	13.43.1 : Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer	64.89	sqm	65 ₹4,217.91	60 ₹3,893.46 Lowest	61 ₹3,958.35
1.05	13.60.1 : Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work	64.89	sqm	140 ₹9,084.74	135 ₹8,760.28 Lowest	180 ₹11,680.38
1.06	5.1.3 : Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)	0.17	cum	8,500 ₹1,428 Lowest	9,000 ₹1,512	9,000 ₹1,512
1.07	9.121 : Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross- section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminated shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame.	6	metre	550 ₹3,300	550 ₹3,300	500 ₹3,000 Lowest
1.08	9.122.1 : Providing and fixing to existing door frames.30 mm thick Glas Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS : 14856, including fixing to frames.	1.89	sqm	3,200 ₹6,051.2	3,200 ₹6,051.2	3,100 ₹5,862.1 Lowest
1.09	21.1.1.3 : Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):For fixed portionPolyester powder coated aluminium ( minimum thickness of polyester powder coating 50 micron )	128.5	kg	600 ₹77,100	600 ₹77,100	560 ₹71,960 Lowest

Sl No

Description

Qty

Unit

SHAHEER K A

AAYKAYCONSTRUCTIONS

GLOBAL CONSTRUCTIONS

1.00CIVIL WORKS

1.01

15.7.4 : Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In cement mortar

2.14

cum

1,200

₹2,568

1,100

₹2,354

Lowest

1,100

₹2,354

Lowest

1.02

50.6.1.5 : Solid block masonry using pre cast solid blocks ( Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 Part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand) etc complete

6.49

cum

7,700

₹49,980.7

Lowest

7,800

₹50,629.8

7,900

₹51,278.9

1.03

13.1.1 : 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)

64.89

sqm

320

₹20,765.12

314

₹20,375.77

Lowest

350

₹22,711.85

1.04

13.43.1 : Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer

64.89

sqm

₹4,217.91

₹3,893.46

Lowest

₹3,958.35

1.05

13.60.1 : Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work

64.89

sqm

140

₹9,084.74

135

₹8,760.28

Lowest

180

₹11,680.38

1.06

5.1.3 : Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

0.17

cum

8,500

₹1,428

Lowest

9,000

₹1,512

9,000

₹1,512

1.07

9.121 : Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross- section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminated shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame.

metre

550

₹3,300

550

₹3,300

500

₹3,000

Lowest

1.08

9.122.1 : Providing and fixing to existing door frames.30 mm thick Glas Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS : 14856, including fixing to frames.

1.89

sqm

3,200

₹6,051.2

3,200

₹6,051.2

3,100

₹5,862.1

Lowest

1.09

21.1.1.3 : Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):For fixed portionPolyester powder coated aluminium ( minimum thickness of polyester powder coating 50 micron )

128.5

600

₹77,100

600

₹77,100

560

₹71,960

Lowest