Ajabpur Khurd in Ajabpur Zone No 37 of Dehradun 23 Zones coverage water supply scheme under AMRUT Programme

Amount

Civil Works Supply of all labour, materials, T&P etc. and construct pump house (3.6 m × 3.0 m) as per departmental type design

Supply of all material labour T&P etc. and construct the boudary wall as per type design

In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.

Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

Dismantling manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge

Bituminous road

Excavation in soil mixed with single boulder etc. requiring the use of special T&P, if any, for pipe line trenches including lift unto 1.5 m and lead unto 50 m and refilling, watering, ramming of excavated earth in to the trenches and disposal of surplus earth unto 50 m from the center of the trenches.

Providing of all materials, carting from site store to site of work, lowering into trenches with true to alignment, Laying & Jointing of full lenght S&S Centrifugally cast (spun) Ductile iron pipes including supply of "EPDM" rubber gaskets conforming to IS : 5382/1985 with testing of pipe line complete.

D.I. Pipe conforming to IS: 8329/2000

D.I. Pipe S&S K-9

200 mm dia

D.I.D/F Pipe K-9

200 mm dia

Providing and laying DI specials of class K-12 suitable for push - on - jointing as per IS: 9523-2000

Upto 600 mm dia

C.I. D/F Sluice Valves confirming to IS: 14846-1999

Pressure PN 1.6

200 mm dia

C.I. Air Valve Double Acting

80 mm dia

Providing and fixing gun metal non- return valve of approved quality (screwed end) :

80 mm nominal bore (Vertical)

Supply of all materials, labour T&P etc. and construct following valve chambers with a floating coat of neat cement complete as per standard design : With F.P.S. bricks

Sluice Valve chambers

Air Valve chambers

Supply of all material, labour T&P etc. and provide Nala and Culvert crossing by Pipe line.

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - -All work upto plinth level 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size. For Cement Concrete Pavment:

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - -All work upto plinth level 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) For Cement Concrete Pavment:

Road cutting charges for reinstatement of bitumenous roads as per P.W.D Road reinstatement rates (As per revised by Chief Engineer, PWD, Uttarakhand, Dehradun)

E&M Works Transportation of Rig Machine, Air compressor O.P unit camp equipages, connected T&P & necessary material required for drilling up to site of work, including loading, unloading etc. complete.

Erection and Leveling of Rig Machine at site of work

Dismantling of Rig Machine & Clearance of site after satisfactory completion of work.

Drilling of borehole from GL to 160 mtr. BGL

Supply & Lowering of TW assembly as below-

300 mm dia MS ERW fincut 7.9 mm thick Plain pipe

300 mm dia MS ERW fincut 7.9 mm thick Slotted pipe

Supply and fixing of 300 mm dia, 8 mm thick tubewell cap.

300 mm dia Bail plug with nut & U- bolt as required.

Supply and fixing of 300 mm dia M.S.D.I housing clamp and girder.

Supply and shrouding of Pea gravel

Development of tubewell by 350 PSI/1100 CFM Air compressor.

Development of tubewell by the suitable capacity O.P unit.

Geohydrological survey of site.

Chemical & bacteriological testing of water sample

SITC of Submersible pump-set of discharge 1500 lpm, 100mt head with suitable capacity motor to operate on 415±10% Volts, 3 Phase, 50 c/s A.C. supply complete.(one no.as spare)

Wall/Floor mounting Starter cum panel suitable for above submersible motor.

25 Sq mm PVC insulated Cu conductor, 3- core, XLPE submersible cable.

70 Sq mm PVC insulated, Al conductor, 3.5 - core, XLPE armoured cable.

Main Incomer MCCB-250A with MCCB enclosure box.

Jointing material such as lugs, tapes etc.

Double loop earthing of all electrical equipments. (as per I.E.Rules)

Main Piping & Valves :150 mm dia 7.1 mm thick MS column pipe assemblyin 3.0 mt length with interlocking arrangement.

150 mm dia. CIDF Sluice valve PN-1.6 with hand wheel

150 mm dia. CIDF Reflux valve PN-1.6

Main Piping & specials : comprising of 150 mm dia , DF pipes & specials complete

Gauges -100 mm dial pressure gauge with control cock and fittings of range 0-10 kg/cm2

Supply of tools

Supply of chain pulley block of 5 ton capacity 4.5 mt lift complete.

Supply of MSDI clamp set 150 mm dia-2 pair

Supply of rubber resistance sheet of size 1 m × 2 m × 0.025 m.

Supply & Installation of chlorine dosing pump 6 kg/cm2, 8 lph, suitable to operate at single phase supply 240 +/- 10% along with Injector and NRV, Starter cum panel,Single phase automatic stabilizer, 200 Ltr.Capacity PVC tank, Chlorine testing kit, PVC pipes etc. including first fill of Sodium hypo-chloride (Naocl) solution.

Installation of pumping plant & accessories at tubewell

Testing & commissioning of pumping plants against guaranteed figures of schedule 'E' at site

Painting of entire installation with 02 coats of super enamel paint as per direction of Engineer-in-charge of works

Supply of Sodium hypo-chloride (Naocl) solution.

Intelligent GSM based remote terminal units/PLC with Analog & Digital Paramenter and features as specified to store and transmit data on GSM backbone.RTU/PLC designed with logic to transfer data at multiple stations and also compatible to satellite communication.

GSM Based wireless Communication system capable to transfer and gathered data from site to existing MCS including all accessories

Intelligent Energy meters

Isolation transformer (440v to step down 220v) for protection of RTU/PLC & instruments from high voltage and low voltage)

Auto phase reversal unit for auto phase corrector. (40-100 H.P.Motor)

Pressure transmitter

Electronic flow meter up to 150 mm size

Valve actuators (150 mm size)

Actuator panels.

Hard wired timer circuit for actuators

Signal/ Control cabling between RTU's and field instruments including screen/unscreened & control copper cables, PVC conduit pipes, accessories, AC/DC relays with base, flexible pipe, lugs etc. complete in all respect.

Erection, Commissioning & Customization of i- RTU/ PLC & software & Integration with existing SCADA Station

Supply of 3-phase, rolling contact Servo Voltage Stablizer 125 KVA with input range 300 V-480 V with constant output of 415 V +/- 1% complete in all respect ONAN type.

70 Sq mm PVC insulated, Al conductor, 3.5 - core, XLPE armoured cable.

supply of 250 A TPN change over switch

Double loop earthing of Servo voltage stablizer. (as per I.E.Rules)

Installation, testing, & commissioning of threee phase Servo voltage stablizer

Operation, running & maintenance of pumping plants for a period of 06 month in automation mode.

Internal Electrification of pump house

Wiring for light point, fan point etc. with 1.5 sq mm FR PVC insulated copper conductor single core cable in surface PVC conduit with piano type switch, phenolic laminated sheet, suitable size GI box, with earth wire of 1.5 sq mm FR PVC insulated copper conductor single core cable etc as required.

Wiring for circuit/submain alongwith earth wire with size of 2x2.5 sq. mm + 1x2.5 sq. mm earth wire of FR PVC insulated copper conductor single core cable in surface PVC conduit as required.

Wiring for circuit/submain alongwith earth wire with size of 2x4 sq. mm + 1x4 sq. mm earth wire of FR PVC insulated copper conductor single core cable in surface PVC conduit as required.

Supply and fixing of metal box of 180 rnm x 100 mm x 160 mm deep on surface with suitable size phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 amp and 15x16 amp socket outlet and 15/16 amp piano type switch, connections, painting etc as required.

Supply and fixing of 6 way double door S.P.N. sheet steel, MCB DB, 240 V on surface complete with copper bus bar, neutral bus bar, earth bar, inter connections including earthing etc as required. (But without MCB/RCCB/Isolator) 6 way double door

Supply and fixing of 5 A to 32 A, 240 V, 10 KA, C serious MCB suitable for inductive load of following pole in the existing MCB DB complete with connection, testing etc as required.

Supply and fixing of double pole, 240 V, isolator ( 40amp. ) in the existing MCB DB complete with connection, testing etc as required.

Supply and fixing of 20 W LED tubelight complete in all respect (Bajaj/Philips or Equivalent make)

Supply in fixing of LED 36 watt external lighting lumaineries