HWPT/ELE/MP/2024/AMCLight/156

Amount

Maintenance of Fluorescent / LED Single Tube Light Fittings. Cleaning of all light fittings, Attending day-to-day complaints, Replacement of bulbs and holders, attending to circuit faults and other problems, removal of old fluorescent lights and installation of new LED / fluorescent lights with new wiring and painting of corroded light fittings.

Maintenance of Fluorescent / LED Twin Tube Light and 2x2 feet LED Fittings. Cleaning of all light fittings, Attending day-to-day complaints, Replacement of bulbs and holders, attending to circuit faults and other problems, removal of old fluorescent lights and installation of new LED / fluorescent lights with new wiring and painting of corroded light fittings..

Maintenance of Flame Proof Well Glass LED light fittings at Plant Site. Cleaning of light fittings, attending day-to-day complaints, replacement of led drivers, attending to circuit faults and other problems etc, removal of old fittings and installation of new fittings, shifting of old fitting to scrap yard. Maintenance of control gear box, junction box, LDB, flame proof light fitting and providing silicon grease to prevent water entry.

Replacemenet of old flame proof light (80/125 W HPMV) with new LED flame proof lights includes fabrication work like welding.glanding, termination, removal of old fitting and shiting of old fitting to scrap yard

Maintenance of Street Light Fittings in plant, approach road and Post Top Lanterns in Admin Building Cleaning of light fittings, Attending day-to-day complaints, replacement of drivers, LED light strip and removal of old fittings and installation of new fittings and shiting of old fitting to scrap yard.

Maintenance and servicing of Ceiling/ Pedestal/ Exhaust and wall mounting fan Cleaning of fans,Attending day-to-day complaints, replacement of cap. Bearing, gromet,cotter/split pins, complete overhauling and painting of corroded parts at the time of replacing / greasing both bearings.

Maintenance of Distress alarm system installed in control room/ 110KV Switchyard and Main gate Attending complaints and replacement of faulty component , checking control circuit and its rectification (3 alarm system x 4 times in a year)

Maintenance of Siren motors at plant Checking of control circuit, contactors and motor terminal box etc...and and replacement of faulty component (2 siren x 4 times in a year)

Arranging temporary lighting/ power supply. Fixing new light fittings/ flood lights, Termination of wires at fitting and junction box, shifting of distribution board (DB), termination on DB.

Attending Air Conditioners complaint/replacement of power socket, plug, power circuit wiring etc,..

Attending of day to day complaints like power socket, heater,induction stove, fume extractor grinder,idly cooker, electric oven, stirrer etc,…..

Attending power supply problem in Admin,Change over of Admin supply from TNEB to Plant supply and back to TNEB supply etc,…

Cable laying through tray/along wall/through structure

Cable laying under ground upto 50 sq.mm

Rewinding of grinder motor/ ceiling fan motor/mixer motor

Checking of Lightning arrester connectivity yearly once as per tender specification

Wiring of lighitng circuits/power circuits with required PVC conduits/casing and capping , required accessories like clamps, screws for fixing. Wires will be given by Department.

Supply of Wooden Screws of following sizes i) 25/8

Supply of Wooden Plugs

Supply of Metal Screws of following sizes a) 1/4"

Supply of Rustolene

Supply of Silicone Grease

Supply of Silicone sealent

Supply of painting brush suitable for fan and light fittings a) 2"

Supply of Yellow primer

Supply of LED T/L Fitting suitable for fixing 20W LED tubel ights - make: Philips a) Single fitting

Supply of following materials for painting of fans and corroded light fittings. Supply of thinner in 1 litre pack

Supply of emery sheets - rough type

Supply of emery sheets - fine type

Supply of MS box with cover,2mm thickness of size 10"x 8"

Supply of SS Bolt of size 8mm x 25 mm hexagonal type

Supply of SS Bolt of size 10mm x 25 mm hexagonal type

Supply of Paint (i) Gray colour in 1 litre and 2 litre pack

ii) White colour in 1 litre pack

iii) Brown colour in 1 litre pack

Supply of PVC bend 1" with 2mm thickness

Supply of MCB ,1P, C curve, 20A

Supply of 2P,20A, C curve MCB

Supply of Insulation Tape

Supply of PVC bend 3/4" with 2mm thickness

Supply of saddle SS coated 1"

Supply of saddle SS coated 3/4"

Supply of saddle SS coated 1/2"

KODAI ENGINEERING