Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
| 3 | Not Admitted-Fee/PreQual/Technical | Not Admitted-Fee/PreQual/Technical Not Complied with technical specification |
Tender Value
₹10.0 L
EMD Value
₹19,940
Closing Date
15 Jun 2024, 2:00 pmClosed
Execiutive Engineer PHE Division Samba
Executive Engineer PHE Division Samba
Please refer BOQ
2024_PHE_249638_1
PHES/15 of 2024-25 dated 08-06-2024
Open Tender
Civil Works
Item Wise
30 days
Samba
Please refer tender document
2 documents required · 2 mandatory
₹500
Execiutive Engineer PHE Division Samba
₹19,940
15 Jun 2024
8 Jun 2024
15 Jun 2024
8 Jun 2024
15 Jun 2024
8 Jun 2024
8 Jun 2024 - 10 Jun 2024
Amount
Dismantling manually/ mechanically including stacking of serviceable material and disposal of unseviceable material within 50 meters lead as per direction of Engineer -in- charge: Bituminious road
Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 mteres lead as per directions of Engineer -in -charge 1:3:6 or richer mix (i/c equivalent design mix)
Earth work inexcavation by manual means in trenches for foundation ,drains,pipes, cables etc(not exceeding 1.5 mtr in width ) and for shafts,wells,cesspits and the like not exceeding 10 sqm on plan including dressing of sides and ramming of bottoms lift upto 1.5mtr including getting out excavated earth and disposal of surplus excavated earth as directed; ( pipe work and Boundary wall)
Providing and fixing of G.I. Pipe complete with G.I. fittings excluding treches and refilling etc. 80 mm dia (Medium)
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc.
Welding of joints including transpotation of plant at site complete By electric Plant
Providing and laying in position cement concrete of specified grade including curing exculding the cost of centering and shuttering. All work upto plinth level with 1:4:8 mix (1 cement 4 coarse sand 8 graded stone agg. 40 mm nominal size)
Providing and laying in position cement concrete of specified grade including curing exculding the cost of centering and shuttering. All work upto plinth level with 1:3:6 mix (1 cement 3 coarse sand 6 graded stone agg. 20 mm nominal size) ( pipe laying and boundary wall)
Centring and shuttering including strutting, propping etc and removal of form work for foundation, footings, base for columns etc.
Centring and shuttering including strutting, propping etc and removal of form for walls (any thickness) including attached pilasters buttresses, plinth and string course fillets, kerbs and steps etc.
Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:6 ( 1 cement : 6 coarse sand)
Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level
Half brick masonry with common brunt clay ( non- modular) bricks of class designation 7.5 in foundation and plinth including curing in cement mortar 1:4 (1 cement : 4 coarse sand)
Extra for Half Brick work masonry in superstructure above plinth level upto floor V level
12mm thick Cement plaster on the rough side of single or half brick wall of mix:1 : 4 ( 1 cement : 4 coarse sand)
Repair to plaster of thickness 12mm to 20 mm in patches of area 2.5sqm and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls comlete with white cement including disposal of rubbish to the dumping ground with 50 meters lead with cement mortar 1:4
Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.
Furnishing walls with water proofing cement paint of required shades on new work ( two or more coats applied @ 3.84 kg/ 10sqm)
Supplying and filling of River Bed Material including carriage, royalty by mechanical transport etc. complete (LMR)
Labour engaged for cleaning of 100000 glns capacity Sump Tank at Tube well No. 2
Providing and fixing of gun metal gate valve with C.I. wheel of approved quality (screwed end) 80 mm nominal bore
Carriage of Sand and stone aggregate ( Crushed) upto 20 mm by Mechanical Transport from source (to be identified by engineer in charge) to site of work including cost for loading and unloading.for an av. distance of Average 15 km
Carriage of stone aggregate (Crushed) upto 40-65 mm by Mechanical Transport from source (to be identified by engineer in charge) to site of work including cost for loading and unloading.for an av. distance of Average 15 km
Carriage of Bricks by Mechanical Transport from source (to be identified by engineer in charge) to site of work including cost for loading and unloading.for an av. distance of Average 15 km
Mohd Arif Malik Contractor
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .