Renovation of Existing Lecture Hall, Library and Academic Block at Govt. General Hospital, Kozhikode

Amount

Interior Works

15.7.4 : Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In cement mortar

15.12.2 : Of area beyond 3 sq. metres

50.9.1.1 : Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately), using good quality Anjili wood /jack wood

50.9.5.1 : Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes including ISI marked M.S pressed butt hinges bright finished of required size with necessary screws. Using Anjili wood/ jack wood 35 mm thick shutters.

50.14.1.2 : Removing and refixing window shutters after necessary repairs for easy opening and closing etc complete as per the direction of site Engineer-in-charge

14.6.1 : Renewing glass panes, with wooden fillets wherever necessary:Float glass panes of thickness 4 mm

26.28.3 : Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge25 mm average thickness

26.31.1 : Providing, mixing and applying bonding coat of approved adhesive on chipped portion of RCC as per specifications and direction of Engineer-In-charge complete in all respect.SBR Polymer (@10% of cement weight) modified cementitious bond coat @2.2 kg cement per sqm of surface area mixed with specified proportion of approved polymer

26.32.2 : Providing, mixing and applying SBR polymer (of approved make) modified Cement mortar in proportion of 1:4 (1 cement: 4 graded coarse sand with polymer minimum 2% by wt. of cement used) as per specifications and directions of Engineer-in-charge. Note: Measurement and payment: The pre-measurement of thickness shall be done just after the surface preparation is completed and Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding / tapping with a blunt metal instrument and/or the 75mm size cube crushing strength at the end of 28 days to be not less than 30 N/Sqmm2).25 mm average thickness in 2 layers.

10.28 : Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.)

12.45.1 : Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/ sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5x25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with:12.5 mm thick tapered edge gypsum plain board conforming to IS : 2095-Part 1

21.1.2.2 : For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron)

21.3.1 : Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness

9.20.1 : Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of I st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

13.4.1 : 12 mm cement plaster of mix:1:4 ( 1 cement : 4 coarse sand)

13.88 : Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete

13.43.1 : Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer

13.68.1 : French spirit polishing:Two or more coats on new works including a coat of wood filler

13.98.1 : Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:One or more coats on old work

13.99.1 : Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :One or more coats on old work

od371656/2022_2023 : Providing and fixing Hydraulic door closer bottle type M>S body with necessary accessories and screws etc complete

od : Providing and setting of wooden frame for all size with 1x1m distance using 50x25 mm thick scantling of irul wood and levelling the surface with 12 mm thick marine plywood

od : Providing and fixing box type partion with marine grade plywood both sides natural teak wood ply wood veneered sheet on top teak wood planks etc complete

od : Providing and fixing Teak wood panelling 12 mm thick ,tratment using terminator with the thorough the surface of entire panalling area including cost of all materials all labour charges etc complete

od : Providing and fixing Roller blind curtain with brackets fixed with screws ,strings space tap and face plate etc necessary complete

od : Providing Vinyl flooring 1.50mm thick with synthetic adhessive including all cost of conveyance and all labour charges etc complete

od : Fabricating and errecting MS steel platform using MS angle flat covered top and side wooden check sheet top of the sheet covered with good qyality rexin including all fabrication charges all material and labour charges etc complete

od : Providing and fixing MS Steel frame work of stair using MS angle and flat and step and landing covered wooden ckeck sheet 12 mm thick all fabrication work painting including cost of all materials labour charges etc complete

od : Providing and fixing box type partition made with the frame of MS angle and flat and covered with gypsum sheet on both sides including cost of all materials labour charges etc complete

od : Supplying and fixing Rock wool echo proof 50 mm thick fixing to the wooden frames already fixed with steel screws and adhessive including cost and conveyance of all materials labour charges etc complete

od : Providing and fixing with 12 mm float glass panes fixed with teak wood frames including cost and conveyance of all materials labour charges etc complete

od : Providing and fixing book shelf made with 100% marine plywood frames outer and inner partition including shutters all covered with teak wood laminated sheet including all fitting charges cost and conveyance of all material charges etc complete

od : Providing and fixing cement bonded particle board or equivalent make of size 203x102x6 mm of approved quality in steel frame work with necessary screws etc complete(Steel frame work shall be pade separately)

od : Providing and fixing Ply wood table with marine ply wood frame make with irul wood top and rack with ply wood and finishing with laminated sheet including all fittings , all cost and conveyance of materials and labour charges etc complete

od : Supplying and fixing wooden Teapoy of size 90x60 cm including cost and conveyance of all materials labour charges etc complete

od : Supplying and fixing good quality Library chair

od : Providing and Supplying armed cushion chair with foldable full writing pad including a bottom shelf with specication as shown in the picture including cost and conveyance of all materials albour charges etc complete

PLUMBING WORK

17.7.2 : Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 630 x 450 mm with a single 15 mm C.P. brass pillar tap

17.32.2 : Providing and fixing mirror of superior glass ( of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :Rectangular shape 453x357 mm

18.51.1 : Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.15 mm nominal bore

50.18.7.2.1 : Providing and fixing PVC pipes, fittings including fixing the pipe with claps at 1.00 metre spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 20 mm dia 12Kgf/cm2 - Internal work - Exposed on wall

50.18.7.6.1 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 50 mm dia 10 Kfg/cm - Internal work- Exposed on wall

ELECTRICAL WORKS

1.10.3 : Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.Group C

1.14.1 : Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2x1.5 sq.mm + 1x1.5 sq.mm earth wire

1.14.2 : Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

1.14.3 : Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2 X 4 sq. mm + 1 X 4 sq. mm earth wire

1.31 : Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. (For light plugs to be used in non residential buildings).

1.55.3 : Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.Group C

2.3.3 : Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCBIRCCB/Isolator12 way, Double door

2.4.3 : Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)8 way (4 + 24), Double door

2.5.2 : Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 volts, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 amps tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB's (but without MCB's and incomer ) as required .(Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.)8 way (4 + 24), Double door

2.10.1 : Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole

2.10.4 : Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Triple pole

2.15.2 : Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps

2.15.3 : Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 amps

od377312/2022_2023 : Supplying and fixing 25 W LED ceiling light including cost and conveyance of all materials labour charges etc complete

od377313/2022_2023 : Supply and fixing 4 feet LED Tube ( Make of material : Philips ,Osram, Compton,Bajaj)

od377474/2022_2023 : Supplying and laying commissioning of 4 core ,25 sqmm PVC insulated armored Aluminium UG cable through trench or wall including clamping with suitable metal clamp and including cost of all materials labour charges etc complete

od377538/2022_2023 : Supplying and carrying out cable end termination for 4 core 25 sqmm PVC insulated armored aluminium UG cable by using brass compression cable glands and aluminium palm socket including cost and conveyanc e of all materials labour charges etc complete

od377539/2022_2023 : Supply, laying and commissioning of 4 core 10 SQ MM PVC insulated armored aluminium U G cable through trench or wall including clamping with suitable metal clamp.

od377540/2022_2023 : Supply and carrying out cable end termination for 4 core 10 SQ MM PVC insulated armored aluminium U G cable by using suitable brass compression cable glands and aluminium palm sockets.

od377541/2022_2023 : Supply and Laying the following: GI or Copper strip (tinned at point of contact) wire at 0.6 mm below the ground level including excavation and refilling of Contractor's earth, Electrode including Welding etc. as required.<br>a) 3.15 mm Cu (10 SWG)

od378103/2022_2023 : Providing drain works 25 mm 6 kg class

od378104/2022_2023 : Providing 9 mm thick thermal insulation

od378105/2022_2023 : Supplying and laying 12 mm Accoustic sheet including cost and conveyance of all materials labour charges etc complete

od378106/2022_2023 : Supplying and fixing factory fabricated ducting 24 gauge including cost and conveyance of all materials labour charges etc complete

od378107/2022_2023 : Supplying and fixing factory fabricated ducting 22 gauge including cost and coveyance of all materials albour charges etc complete

od378108/2022_2023 : Supplying and insulating 8.5 TR ductable carrier make AC of approved make with copper pipe laying including cost and coneyance of all materials labour charges etc complete

Extra Low Voltage work

od379402/2022_2023 : Lecture Hall AV - For lecture hall we have proposed 8 nos of 15 W speaker with one 240 W mixer amplifier for the local sound reinforcement .For combining the signals and to reciprocate the sound effectively series mixer are cosidered .The automatic feed back terminator connected to the mixer is used for filtering the feedback frequencies without altering the sound of other audio content .For sound reprodection we have proposed wireless handled ,wireless Lapel and table top gooseneck microphone with podium

od379445/2022_2023 : Supplying and Installation of Projector with motorized projector screen in the video section for any visual presentation during any meeting including cost and conveyance of all materials labour charges etc complete

HORIZON ASSOCIATES

Betterland Builders LLP

Bidder Name

Betterland Builders LLP

HORIZON ASSOCIATES

AB ASSOCIATE