Repair to Certain steel furniture under GE Dehradun.

Amount

Almirah Steel Med and Small FD-243 & 1032 Removing old broken hinges and fixing new hinges of existing shape and size through gas welding complete all as specified and directed

Removing of U/S lock and Supply and fix New lock of 4 lever with duplicate key of best quality fancy type of existing shape and size complete all as specified and directed

Removing of unsv/Broken handles and Supply and fix new Chromium Plated handle of existing shape and size complete all as specified and directed

Removing of U/S & rusted legs and Supply and fix new legs made out of MS Sheet 1.6mm thick of existing shape and size complete all as specified and directed

Removing of U/S & rusted shutters and Supply and fix new shutter made out of MS Sheet 1.00mm thick of existing shape and size complete all as specified and directed

Removing of U/S & rusted shelves and Supply and fix new shelves made out of MS sheet 1.00 mm thick of existing shape and size complete all as specified and directed

Providing MS clamps of suitable pattern to the shelves to hold shelves of existing shape and size complete all as specified and directed

Removing existing u/s 03Way locking device and Supply and fix new 03way locking device with plunger rod MS complete to match the original of suitable pattern to the locking system of Almirah steel of existing shape and size complete all as specified and directed

Material and labour preperation of old surfaces of ALMIRAH MED & SMALL STEEL (Drawing No. FD-67 & FD-1031) by Sand Paper/Scrapper and applying 02 Coat of Hammertone Silver metallic (externally) and Smoke Grey paint (internally) (as approved) by Spray Painting Machine, complete all as specified and as directed.

Almirah Large Steel FD-1031, FD-67

Removing old broken hinges and fixing new hinges of existing shape and size through gas welding complete all as specified and directed

Removing of U/S lock and Supply and fix New lock of 4lever with duplicate key of best quality fancy type of existing shape and size complete all as specified and directed

Removing of unsv/Broken handles and Supply and fix new Chromium Plated handle of existing shape and size complete all as specified and directed

Removing of U/S & rusted legs and Supply and fix new legs made out of MS Sheet 1.6mm thick of existing shape and size complete all as specified and directed

Removing of U/S & rusted shutters and Supply and fix new shutter made out of MS Sheet 1.00mm thick of existing shape and size complete all as specified and directed

Removing of U/S & rusted shelves and Supply and fix new shelves made out of MS sheet 1.00 mm thick of existing shape and size complete all as specified and directed

Providing MS clamps of suitable pattern to the shelves to hold shelves of existing shape and size complete all as specified and directed

Removing existing u/s 03 Way locking device and Supply and fix new 03way locking device with plunger rod MS complete to match the original of suitable pattern to the locking system of Almirah steel of existing shape and size complete all as specified and directed

Material and labour preperation of old surfaces of ALMIRAH LARGE STEEL (Drawing No. FD-67 & FD-1031) by Sand Paper/Scrapper and applying 02 Coat of hammertone Silver metallic (externally) and Smoke Grey (internally) (as approved) by Spray Painting Machine, complete all as specified and as directed.

Chair Verandah FD-256, FD-19/259

Material and labour welding (full welding rod as a one spot) of broken part of CHAIR VERANDAH as shown on Drawing No. FD-19, FD-256 & FD-259, rubbing welded portion to obtain a smooth surface & taking out unserviceable part, complete all as specified and as directed.

Material and labour Mild Steel Round Bar 12mm dia to cover the distance between RT & LT Leg alongwith the Seat Front Side or Rear Side of CHAIR VERANDAH as shown on Drawing No. FD-19, FD-256 & FD-259 and welded, & taking out unserviceable Bar, complete all as specified and as directed.

Supply and fix HARD RUBBER SHOE superior quality (as approved) fixing to Leg of CHAIR VERANDAH as shown on Drawing No. FD-19, FD-256 & FD-259 including taking out unserviceable Shoe, complete all as specified and as directed.

Material and labour Re-canning of CHAIR VERANDAH in Godrej pattern with 4.0mm wide Half Round Oval Shape Plastic Cane (as approved) to Frame as shown on Drawing No. FD-19, FD-256 & FD-259 including taking out old/worn out Canning, complete all as specified and as directed.

Material and labour removing/scrapping old worn out Paint from Steel Frame of CHAIR VERANDAH (Drawing No. FD-19, FD-256 & FD-259) by Sand Paper/Scrapper and applying One two of White Colour Synthetic Enamelled Paint (as approved) by Spray Painting Machine, complete all as specified and as directed.

Chair CB Steel With Arms FD-75(M)

Removing of old broken Seat and Supply and fix new seat of Existing size with 50mm thick Foam cushion Pasted with suitable adhesive over 12mm thick plywood fixed on IInd Class HW frame & Seat surface covered with leatherite Rexin cover 2mm thick &screwed to track rail as directed by Engr-in-Charge.

Removing of old broken Back and Supply and fix new seat of Existing size with 50mm thick Foam cushion Pasted with suitable adhesive over 12mm thick plywood fixed on IInd Class HW frame & Seat surface covered with leatherite Rexin cover 2mm thick &screwed to track rail as directed by Engr-in-Charge.

Material and labour ARMS REST made out of Modular plastic Arms for CHAIR CBA STEEL WITH ARMS, fixed with suitable size Screws and Painting with Black Colour Synthetic Enamelled Paint (as approved) on Back Frame as shown on Drawing No. FD-75(M) including taking out unserviceable Arms Rest, complete all as specified and as directed.

Material and labour Mild Steel Flat Iron 25x3.0mm as RUNNER of length 350mm (approx), making hole for fixing End and Other End welded to CHAIR CBA STEEL WITH ARMS size 35x25x3 mm, FD-75(M) including taking out unserviceable Runner & complete all as specified and as directed.

Supply and fix PVC CAP at the top of Back Steel Pipe of CHAIR CBA STEEL WITH ARMS as shown on Drawing No. FD-75(M) including taking out unserviceable Cap, complete all as specified and as directed.

Supply and fix HARD RUBBER SHOE superior quality (as approved) fixing to Leg of CHAIR CBA STEEL WITH ARMS as shown on Drawing No. FD-75(M) including taking out unserviceable Shoe, complete all as specified and as directed.

Material and labour removing/scrapping old worn out Paint from exposed Steel Frame of CHAIR CBA STEEL WITH ARMS (Drawing No. FD-75(M)) by Sand Paper/ Scrapper and applying Two coat (OG) of Synthetic Enamelled Paint (as approved) by Spray Painting Machine, complete all as specified and as directed.

Chair CB Steel without Arms FD-75(M)

Removing of old broken Seat and Supply and fix new seat of Existing size with 50mm thick Foam cushion Pasted with suitable adhesive over 12mm thick plywood fixed on IInd Class HW frame & Seat surface covered with leatherite Rexin cover 2mm thick &screwed to track rail as directed by Engr-in-Charge.

Removing of old broken Back and Supply and fix new seat of Existing size with 50mm thick Foam cushion Pasted with suitable adhesive over 12mm thick plywood fixed on IInd Class HW frame & Seat surface covered with Best quality tapestry Cloth &screwed to track rail as directed by Engr-in-Charge.(NOTE:-Not Less than 350/-mtr)

Material and labour Mild Steel Flat Iron 25x5.0mm as RUNNER of length 350mm (approx), making hole for fixing End and Other End welded to CHAIR CBA STEEL W/O ARMS size 25x5 mm, applying two coats of Synthetic Enamel Paint over a coat of Red Oxide Zinc Chrome Primer on Steel Surfaces as shown on Drawing No. FD-75(M) including taking out unserviceable Runner, complete all as specified and as directed.

Supply and fix PVC CAP at the top of Back Steel Pipe of CHAIR CBA STEEL W/O ARMS as shown on Drawing No. FD-75(M) including taking out unserviceable Cap, complete all as specified and as directed.

Supply and fix HARD RUBBER SHOE superior quality (as approved) fixing to Leg of CHAIR CBA STEEL W/O ARMS as shown on Drawing No. FD-75(M) including taking out unserviceable Shoe, complete all as specified and as directed.

Provn of 02 Nos of 25mm dia round stiffner welded from seat to bottom of chair CB steel w/o handrest to support the seat ,as per approved by engr-in-charge.

Material and labour removing/scrapping old worn out Paint from exposed Steel Frame of CHAIR CBA STEEL WITH ARMS (Drawing No. FD-75(M)) by Sand Paper/Scrapper and applying One Coat of Synthetic Enamelled Paint (as approved) by Spray Painting Machine, complete all as specified and as directed.

Chair Computer and Chair Revolving Various Types TP

Material and labour TAPESTRY/FABRIC CLOTH over SYNTHETIC FOAM 50 - 75 mm thick (as approved) for SEAT/BACK of CHAIR COMPUTER/ CHAIR REVOLVING including taking out old worn out Tapestry/ Fabric Cloth and Foam from Chairs, complete all as specified and as directed.( Tapestry Cloth should not less than @350/-mtr)

Material and labour CASTOR WHEEL (as approved) of CHAIR COMPUTER/ CHAIR REVOLVING including taking out unserviceable or broken Castor Wheel from Chairs, complete all as specified and as directed.

Material and labour BOTTOM BASE made out of MS steel (as approved) of CHAIR COMPUTER/ CHAIR VISITOR/ CHAIR REVOLVING including taking out unserviceable Bottom Base from Chairs, complete all as specified and as directed.

Material and labour GAS LIFTING HYDROLIC SYSTEM of CHAIR COMPUTER/ CHAIR VISITOR/ CHAIR REVOLVING including taking out unserviceable Gas Lifting Hydrolic System from Chairs, complete all as specified and as directed.

Material and labour HANDLE of CHAIR COMPUTER/ CHAIR VISITOR/ CHAIR REVOLVING including taking out unserviceable Handle from Chairs, complete all as specified and as directed.

Chair School with Hand Board FD-140/ FD-48/ FD/E6/MAP/05

Material and labour Moulded PVC/wooden seat and back of CHAIR SCHOOL WITH HAND BOARD as shown on Drawing No. FD/E6/MAP/05/ FD-140/ FD-48 including taking out unserviceable seat back, complete all as specified and as directed.

Material and labour Hand board made out of WPC Board of CHAIR SCHOOL WITH HAND BOARD as shown on Drawing No. FD/E6/MAP/05/ FD-140/ FD-48 including taking out unserviceable seat back, complete all as specified and as directed.

Material and labour for Welding of Broken Leg with Mild Steel Round Pipe of size 20mm x 1.6 mm thick (as required) for CHAIR SCHOOL WITH HAND BOARD as shown on Drawing No. FD/E6/MAP/05/ FD-140/ FD-48, & rest complete all as specified and as directed.

Material and labour removing/scrapping old worn out Paint from CHAIR SCHOOL WITH HAND BOARD (Drawing No. FD/E6/MAP/05/ FD-140/ FD-48) by Sand Paper/ Scrapper and applying Two Coats of Black synthetic Enamelled Paint (as approved) by Spray Painting Machine, complete all as specified and as directed.

Material and labour welding (full round on pipe as a one spot) of broken part of CHAIR SCHOOL WITH HAND BOARD as shown on Drawing No. FD/E6/MAP/05/ FD-140/ FD-48, rubbing welded portion to obtain a smooth surface, necessary preperation of surfaces, applying two coats of Black Syntheic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including taking out unserviceable part, complete all as specified and as directed.

Locker Bed Side Steel FD-257/1029

Material and labour SHELF made out of 1.0mm thick Mild Steel Sheet of LOCKER BED SIDE STEEL and made to shape and size as shown on Drawing No. FD-257 & FD-1029, & including taking out unserviceable Shelf, complete all as specified and as directed.

Material and labour DOOR made out of 1.0mm thick Mild Steel Sheet of LOCKER BED SIDE STEEL and made to shape and size as shown on Drawing No. FD-257 & FD-1029, & taking out unserviceable Door, complete all as specified and as directed.

Material and labour LEG made out of 1.6mm thick Mild Steel Sheet of LOCKER BED SIDE STEEL and made to shape and size as shown on Drawing No. FD-257 & FD-1029, & taking out unserviceable Leg, complete all as specified and as directed.

Material and labour aluminum HASP & STAPPLE of size 100mm for LOCKER BED SIDE STEEL and fixed as shown on Drawing No. FD-257 & FD-1029 including taking out unserviceable Hasp & Stapple, complete all as specified and as directed.

Material and labour Mild Steel HANDLE (as approved) of LOCKER BED SIDE STEEL and fixing to Almirah as shown on Drawing No. FD-257 & FD-1029 including taking out unserviceable Handle, complete all as specified and as directed.

Material and labour Mild Steel HINGE (as approved) 50mm in size suitable for LOCKER BED SIDE STEEL and fixing to Almirah as shown on Drawing No. FD-257 & FD-1029 including taking out unserviceable Hinge, complete all as specified and as directed.

Material and labour Complete removing/scrapping old worn out Paint from LOCKER BED SIDE STEEL (Drawing No. FD-257 & FD-1029) by Sand Paper/Scrapper and applying 02 coat of hammertone Paint (as approved) by Spray Painting Machine over a coat of Red Oxide Zinc Chrome Primer, complete all as specified and as directed.

Hot Food Trolley HFD

Material and labour welding of broken part of HOT FOOD TROLLEY as shown on Drawing , rubbing welded portion to obtain a smooth surface, necessary preperation of surfaces , complete all as specified and as directed.

Material and labour Mild stainless Steel HANDLE (as approved) of Hot food trolley and fixing as shown on Drawing No. HFD including taking out unserviceable Handle, complete all as specified and as directed.

Material and labour Mild Steel HINGE (as approved) 50mm in size suitable for Hot Food Trolley and fixing as shown on Drawing No. HFD including taking out unserviceable Hinge, complete all as specified and as directed.

Material and labour Mild Wheel without stoper provision (as approved) of Hot food trolley and fixing as shown on Drawing No. HFD including taking out unserviceable Wheel , complete all as specified and as directed.

Material and labour Mild Wheel with stoper (as approved) of Hot food trolley and fixing as shown on Drawing No. HFD including taking out unserviceable Wheel, complete all as specified and as directed.

Material and labour New heating element of Hot food trolley and fixing as shown on Drawing including taking out of old heating element and rest all as per Drawing

Couch Examination FD- 122

Material and labour TOP of Couch Examination of complete with hassion cloth ,spring,25mm,thick 32 density foam duly leatherite upholstered as shown on Drg.FD-122 including taking out unserviceable top complete all as specified and as directed.

Material and labour Mild Steel Square Pipe of size 25mm, 1.6mm thick as LEG and fixing/ welded to COUCH EXAMINATION as shown on Drawing No. FD-122,&taking out unserviceable Leg, complete all as specified and as directed.

Material and labour Mild Steel Squar Pipe of size 25mm, 1.6mm thick as LONG RAIL and fixing/welded to COUCH EXAMINATION as shown on Drawing No. FD-122, Long Rail, complete all as specified and as directed.

Material and labour Mild Steel Square Pipe of size 25mm, 1.6mm thick as SHORT RAIL and fixing/welded to COUCH EXAMINATION as shown on Drawing No. FD-122,&, complete all as specified and as directed.

Material and labour Mild Steel Square Pipe of size 25mm, 1.6mm thick as SIDE STIFFNER and fixing/welded to COUCH EXAMINATION as shown on Drawing No. FD-122, & complete all as specified and as directed.

Material and labour Mild Steel Square Pipe of size 25mm, 1.6mm thick as CENTRAL STIFFNER and fixing/welded to COUCH EXAMINATION as shown on Drawing No. FD-122, & complete all as specified and as directed.

Material and labour Complete removing/scrapping old worn out Paint from COUCH EXAMINATION (Drawing No. FD-122 by Sand Paper/Scrapper and applying Two Coats of Synthetic Enamelled Paint (as approved) by Spray Painting Machine over a coat of Red Oxide Zinc Chrome Primer, complete all as specified and as directed.

Screen Movable FD- 83, HFD-2015

Material and labour Mild Steel conduit Pipe of size 20mm dia, 1.6mm thick as unserviceable part of frame and fixing/welded to SCREEN MOVABLE as shown on Drawing No. FD-83/2015, & taking out unserviceable part of frame , complete all as specified and as directed.

Material and labour Wheel (as approved) of SCREEN MOVABLE and fixing as shown on Drawing No. FD-83/ HFD- 2015 including taking out unserviceable Wheel, complete all as specified and as directed.

Material and labour Complete removing/scrapping old worn out Paint from SCREEN MOVABLE by Sand Paper/Scrapper and applying Two Coats of Synthetic Enamelled Paint (as approved) by Spray Painting Machine over a coat of Red Oxide Zinc Chrome Primer, complete all as specified and as directed.

Chair Writing FD/MAP/12

Material and labour Seat of CHAIR WRITING and Supply and fix of complete Seat including taking out old worn out Tapestry/ Fabric Cloth and Foam from Chairs, complete all as specified and as directed.

Material and labour Back of CHAIR WRITING and Supply and fix of complete Back including taking out old worn out Tapestry/ Fabric Cloth and Foam from Chairs, complete all as specified and as directed.

Material and labour HANDLE of CHAIR WRITING including taking out unserviceable Handle from Chairs, complete all as specified and as directed.

Material and labour Mild Steel Flat Iron 25x3.0mm as RUNNER of length 500mm (approx), fixing one End and Other End welded to CHAIR WRITING, applying two coat of Synthetic Enamel Paint over a coat of Red Oxide Zinc Chrome Primer on Steel Surfaces as shown on Drawing No. FD/MAP/12 including taking out unserviceable Runner, complete all as specified and as directed.

Rack Steel 6 Tier FD-106,1038

Material and labour SHELF made out of 1.0mm thick Mild Steel Sheet of RACK 6 TIER STEEL and made to shape and size as shown on Drawing No. FD-106 & FD-1038, & complete all as specified and as directed.

Taking out unservisiable ANGLE IRON and supply & fixing new angle iron fo size 40x40x4 mm for FD-1038 and 30x30x3mm for FD-106 of RACK 6 TIER STEEL as shown on Drawing, rest all as specified and as directed.

Material and labour Complete removing/scrapping old worn out Paint from RACK 6 TIER STEEL (Drawing No. FD-106 & FD-1038) by Sand Paper/Scrapper and applying One Coat of OG Synthetic Enamelled Paint (as approved) by Spray Painting Machine over a coat of Red Oxide Zinc Chrome Primer, complete all as specified and as directed.

Trestle Store Steel FD-1043

Material and labour welding (full round of angle as a one spot) of broken part of TRESTLE STORE STEEL as shown on Drawing No. FD-1043, & complete all as specified and as directed.

Material and labour Complete removing/scrapping old worn out Paint from TRESTLE STORE STEEL (Drawing No. FD-1043) by Sand Paper/Scrapper and applying two Coat of Hammertone Paint (as approved) by Spray Painting Machine over a coat of Red Oxide Zinc Chrome Primer, complete all as specified and as directed.

Foam with Back FD-78

Material and labour SEAT of FORM WITH BACK made of single plank of Mdf Board (18/19mm) of size 1800x255x25mm as shown on Drawing No. FD-78 including taking out unserviceable seat, complete all as specified and as directed.

Material and labour BACK of FORM WITH BACK made of single plank of Mdf board of size 1800x150x19mm as shown on Drawing No. FD-78 including taking out unserviceable seat, complete all as specified and as directed.

Material and labour forf Broken Leg with Mild Steel Square Pipe of size 25mm x1.6 mm thick(as required) for FORM WITH BACK as shown on Drawing No. FD-78 & complete all as specified and as directed.

Material and labour removing/scrapping old worn out Paint from FORM WITH BACK (Drawing No. FD-78) by Sand Paper/ Scrapper and applying Two Coats of OG Synthetic Enamelled Paint (as approved) by Spray Painting Machine, complete all as specified and as directed.

Material and labour welding (full round on pipe as a one spot) of broken part of FORM WITH BACK as shown on Drawing No. FD-78, rubbing welded portion to obtain a smooth surface, &complete all as specified and as directed.

Form without Back FD-77/ FD-1027

Material and labour SEAT of FORM WITHOUT BACK made of single plank of Mdf Board (18/19 mm) of size 1800x255x25mm as shown on Drawing No. FD-77/ FD-1027 including taking out unserviceable seat, complete all as specified and as directed.

Material and labour for Broken Leg with Mild Steel Square Pipe of size 25mm x1.6 mm thick(as required) for FORM WITHOUT BACK as shown on Drawing No. FD-77 / FD-1027 & complete all as specified and as directed.

Material and labour removing/scrapping old worn out Paint from FORM WITHOUT BACK (Drawing No. FD-7&/ FD-1027) by Sand Paper/ Scrapper and applying Two Coats of OG Synthetic Enamelled Paint (as approved) by Spray Painting Machine, complete all as specified and as directed.

Material and labour welding (full round on pipe as a one spot) of broken part of FORM WITHOUT BACK as shown on Drawing No. FD-77/ FD-1027 rubbing welded portion to obtain a smooth surface, & complete all as specified and as directed.

Teapoy Varandha Fd/E6/MAP/18 & FD-255

Material and labour TOP of TEAPOY VARANDHA of MDF Board 18/19 mm thick, exterior grade ISI marked (MAKE : GREEN PLY/CENTURY/ARCHIED), providing Teak Wood Beading 5.0 mm thick all round, applying french polish upto the desired finish on beading, as shown on Drawing No. FD/E6/MAP/18 or FD- 255 including taking out unserviceable Top, complete all as specified and as directed.

Material and labour for Welding of Broken Leg with Mild Steel Square Pipe of size 18mm x 1.6 mm thick / 20 mm round pipe 1.6 mm thick (as required) for TEAPOY VARANDHA as shown on Drawing No. FD/E6/MAP/18 and FD-1009,& complete all as specified and as directed.

Material and labour removing/scrapping old worn out Paint from TEAPOY VARANDHA (Drawing No. FD/E6/MAP/18 and FD-255) by Sand Paper/ Scrapper and applying Two Coats of Black Synthetic Enamelled Paint (as approved) by Spray Painting Machine, complete all as specified and as directed.

Material and labour welding (full round on pipe as a one spot) of broken part of TEAPOY as shown on Drawing No. FD/E6/MAP/18 and FD-255,& complete all as specified and as directed.

Shoe Rack FD/E6/MAP

Material and labour welding (full round on pipe as a one spot) of broken part of RACK SHOE as shown on Drawing , rubbing welded portion to obtain a smooth surface, necessary preperation of surfaces, applying two coats of Syntheic enamel paint (as approved) by spray painting machine over a coat of red oxide primer, complete all as specified and as directed.

Material and labour preperation of old surfaces of Shoe Rack Steel (Drawing No. FD/MAP/18) by Sand Paper/Scrapper and applying 02 Coat of Hammertone painting of approved colour

Bed Hard Steel FD/E6/MAP/08R

Material and labour HEAD SIDE BOARD of BED HARD MS TUBING of Prelaminated Particle Board 18/19mm thick, exterior grade, ISI marked and fixing as shown on Drawing No. FD/E6/MAP/08R including taking out unserviceable Head Side Board, complete all as specified and as directed.

Material and labour FOOT REST BOARD of BED HARD MS TUBING of Prelaminated Particle Board 18/19mm thick, exterior grade, ISI marked and fixing as shown on Drawing No. FD/E6/MAP/08R including taking out unserviceable Foot Rest Board, complete all as specified and as directed.

Material and labour Plywood TOP 12mm thick BWR grade confirming to IS-303, ISI marked and fixing to BED HARD MS TUBING as shown on Drawing No. FD/E6/MAP/08R including taking out unserviceable Plywood Top, complete all as specified and as directed.

Material and labour MIDDLE STIFFENER made out from Mild Steel Square Tube/Pipe 25x25mm of 1.6mm wall thickness, adjusting existing 2 No. Stiffeners and fixing to BED HARD MS TUBING and fixing as shown on Drawing No. FD/E6/MAP/08R, & complete all as specified and as directed.

Material and labour Mild Steel CLIT of size 25x25x6mm with single hole on Short Rails for Support of Plywood Top and fixing to BED HARD MS TUBING and fixing as shown on Drawing No. FD/E6/MAP/08R,&, complete all as specified and as directed.

Material and labour Complete removing/scrapping old worn out Paint on Steel Surfaces of BED HARD MS TUBING (Drawing No. FD/E6/MAP/08R by Sand Paper/Scrapper and applying Two Coat of Black Hammertone Paint (as approved) by Spray Painting Machine over a coat of Red Oxide Zinc Chrome Primer, complete all as specified and as directed.

Charpoy MS Tubing with Plywood Top FD/MAP-II/01

Material and labour Plywood TOP 12mm thick BWR grade confirming to IS-303, ISI marked and fixing to CHARPOY MS TUBING WITH PLYWOOD TOP as shown on Drawing No. FD/MAP-II/01 including taking out unserviceable Plywood Top, complete all as specified and as directed.

Material and labour MIDDLE STIFFENER made out from Mild Steel Square Tube/Pipe 25x25mm of 1.6mm wall thickness, adjusting existing 2 No. Stiffeners and fixing to CHARPOY MS TUBING WITH PLYWOOD TOP and fixing as shown on Drawing No. FD/MAP-II/01,complete all as specified and as directed.

Material and labour Mild Steel CLIT of size 25x25x6mm with single hole on Short Rails for Support of Plywood Top and fixing to CHARPOY MS TUBING WITH PLYWOOD TOP and fixing as shown on Drawing No. FD/MAP-II/01, & complete all as specified and as directed.

Material and labour Complete removing/scrapping old worn out Paint on Steel Surfaces of CHARPOY MS TUBING WITH PLYWOOD TOP (Drawing No. FD/MAP-II/01 by Sand Paper/Scrapper and applying Two Coat of Hammertone black Paint (as approved) by Spray Painting Machine over a coat of Red Oxide Zinc Chrome Primer, complete all as specified and as directed.

Table Dining OR's FD-165(M)

Material and labour TOP of TABLE DINING ORS of Plywood (ISI) 18/19 mm thick with 22 guage aluminium sheet (MAKE : GREEN PLY/CENTURY/Archid), shown on Drawing No. FD-165(M) including taking out unserviceable Top, complete all as specified and as directed.

Material and labour Mild Steel Square Pipe of size 20mm, 1.6mm thick as LEG having length from 300mm to 500mm and fixing/ welded to TABLE DINING ORS as shown on Drawing No. FD-165(M), & including taking out unserviceable Leg, complete all as specified and as directed.

Material and labour Mild Steel Square/Round Pipe of size 25mm, 1.6mm thick as LONG RAIL and fixing/welded to TABLE DINING ORS as shown on Drawing No. FD-165(M), & complete all as specified and as directed.

Material and labour Mild Steel Square/Round Pipe of size 25mm, 1.6mm thick as SHORT RAIL and fixing/welded to TABLE DINING ORS as shown on Drawing No. FD-165(M), & including taking out unserviceable Short Rail, complete all as specified and as directed.

Material and labour Mild Steel Square/Round Pipe of size 25mm, 1.6mm thick as SIDE STIFFNER and fixing/welded to TABLE DINING ORS as shown on Drawing No. FD-165(M), complete all as specified and as directed.

Supply and fix HARD RUBBER SHOE superior quality (as approved) fixing to Leg of TABLE COMPUTER as shown on Drawing including taking out unserviceable Shoe, complete all as specified and as directed.

Material and labour Complete removing/scrapping old worn out Paint from TABLE DINING ORS (Drawing No. FD-165(M) by Sand Paper/Scrapper and applying Two Coats of Black Synthetic Enamelled Paint (as approved) by Spray Painting Machine over a coat of Red Oxide Zinc Chrome Primer, complete all as specified and as directed.

Table Office Officer Steel FD-84,1003

Material and labour TOP of TABLE OFFICE OFFICER STEEL of Prelaminated MDF Board 18/19 mm thick, exterior grade ISI marked (MAKE : GREEN PLY/CENTURY/ ARCHIED), providing Teak Wood Beading 5.0 mm thick all round, applying french polish upto the desired finish on beading, as shown on Drawing No. FD-84 & FD-1003 including taking out unserviceable Top, complete all as specified and as directed.

Material and labour DRAWER made out of 1.6mm thick Mild Steel Sheet and fixing to TABLE OFFICE OFFICER STEEL as shown on Drawing No. FD-84 & FD-1003, enamel paint (as approved) & taking out unserviceable Drawer, complete all as specified and as directed.

Material and labour CENTRAL STIFFENER made out of Mild Steel Square Pipe of 25mm and fixing to TABLE OFFICE OFFICER STEEL as shown on Drawing No. FD-84 & FD-1003, & taking out unserviceable Central Stiffener, complete all as specified and as directed.

Material and labour SIDE STIFFENER made out of Mild Steel Square Pipe of 25mm and fixing to TABLE OFFICE OFFICER STEEL as shown on Drawing No. FD-84 & FD-1003, &including taking out unserviceable Side Stiffener, complete all as specified and as directed.

Material and labour LOCK (MAKE : GODREJ) of TABLE OFFICE OFFICER STEEL and fixing as shown on Drawing No. FD-84 & FD-1003 including taking out unserviceable Lock, complete all as specified and as directed.

Material and labour Mild Steel HANDLE of TABLE OFFICE OFFICER STEEL and fixing as shown on Drawing No. FD-84 & FD-1003 including taking out unserviceable Handle, complete all as specified and as directed.

Material and labour for Welding of Broken Leg with Mild Steel Square Pipe of size 25mm (as required) for TABLE OFFICE OFFICER STEEL as shown on Drawing No. FD-84 & FD-1003, & complete all as specified and as directed.

Material and labour removing/scrapping old worn out Paint from TABLE OFFICE OFFICER STEEL (Drawing No. FD-84 & FD-1003) by Sand Paper/Scrapper and applying Two Coats of OG Synthetic Enamelled Paint (as approved) by Spray Painting Machine, complete all as specified and as directed.

Table Office Clk Steel Fd-84, 381 & 1004

Material and labour TOP of TABLE OFFICE CLERK STEEL of Prelaminated MDF Board 18/19 mm thick, exterior grade ISI marked (MAKE : GREEN PLY/CENTURY), providing Teak Wood Beading 5.0 mm thick all round, applying french polish upto the desired finish on beading as shown on Drawing No. FD-84, FD-381 & FD-1004 including taking out unserviceable Top, complete all as specified and as directed.

Material and labour DRAWER made out of 1.6mm thick Mild Steel Sheet and fixing to TABLE OFFICE CLERK STEEL as shown on Drawing No. FD-84, FD-381 & FD-1004, & including taking out unserviceable Drawer, complete all as specified and as directed.

Material and labour CENTRAL STIFFENER made out of Mild Steel Square Pipe of 25mm and fixing to TABLE OFFICE CLERK STEEL as shown on Drawing No. FD-84, FD-381 & FD-1004, &taking out unserviceable Central Stiffener, complete all as specified and as directed.

Material and labour SIDE STIFFENER made out of Mild Steel Square Pipe of 25mm and fixing to TABLE OFFICE CLERK STEEL as shown on Drawing No. FD-84, FD-381 & FD-1004, & complete all as specified and as directed.

Material and labour LOCK (MAKE : GODREJ) of TABLE OFFICE CLERK STEEL and fixing as shown on Drawing No. FD-84, FD-381 & FD-1004 including taking out unserviceable Lock, complete all as specified and as directed.

Material and labour Mild Steel HANDLE of TABLE OFFICE CLERK STEEL and fixing as shown on Drawing No. FD-84, FD-381 & FD-1004 including taking out unserviceable Handle, complete all as specified and as directed.

Material and labour for Welding of Broken Leg with Mild Steel Square Pipe of size 25mm (as required) for TABLE OFFICE CLERK STEEL as shown on Drawing No. FD-84, FD-381 & FD-1004, &complete all as specified and as directed.

Material and labour removing/scrapping old worn out Paint from TABLE OFFICE CLERK STEEL (Drawing No. FD-84, FD-381 & FD-1004) by Sand Paper/ Scrapper and applying Two Coats of OG Synthetic Enamelled Paint (as approved) by Spray Painting Machine, complete all as specified and as directed.

Table 3'x2' without Drawer FD-1007

Material and labour TOP of TABLE 3'X2' WITH OUT DRAWER of Prelaminated MDF Board 18/19 mm thick, exterior grade ISI marked (MAKE : GREEN PLY/CENTURY), providing Teak Wood Beading 5.0 mm thick all round, applying french polish upto the desired finish on beading, as shown on Drawing No. FD-1007 including taking out unserviceable Top, complete all as specified and as directed.

Material and labour CENTRAL STIFFENER made out of Mild Steel Square Pipe of 25mm and fixing to TABLE 3'X2' WITH OUT DRAWER as shown on Drawing No. FD-1007, & complete all as specified and as directed.

Material and labour SIDE STIFFENER made out of Mild Steel Square Pipe of 25mm and fixing to TABLE 3'X2' WITH OUT DRAWER as shown on Drawing No. FD-1007, & complete all as specified and as directed.

Material and labour for Welding of Broken Leg with Mild Steel Square Pipe of size 25mm (as required) for TABLE 3'X2' WITH OUT DRAWER as shown on Drawing No. FD-1007, & Rest complete all as specified and as directed.

Material and labour removing/scrapping old worn out Paint from TABLE 3'X2' WITH OUT DRAWER (Drawing No. FD-1007) by Sand Paper/ Scrapper and applying Two Coats of OG Synthetic Enamelled Paint (as approved) by Spray Painting Machine, complete all as specified and as directed.

Table 3'x2' with Drawer FD-1008

Material and labour TOP of TABLE 3'X2' WITH DRAWER of Prelaminated MDF Board 18/19 mm thick, exterior grade ISI marked (MAKE : GREEN PLY/CENTURY), providing Teak Wood Beading 5.0 mm thick all round, applying french polish upto the desired finish on beading as shown on Drawing No. FD-1008 including taking out unserviceable Top, complete all as specified and as directed.

Material and labour DRAWER made out of 1.6mm thick Mild Steel Sheet and fixing to TABLE 3'X2' WITH DRAWER as shown on Drawing No. FD-1008, & taking out unserviceable Drawer, complete all as specified and as directed.

Material and labour CENTRAL STIFFENER made out of Mild Steel Square Pipe of 25mm and fixing to TABLE 3'X2' WITH DRAWER as shown on Drawing No. FD-1008, & complete all as specified and as directed.

Material and labour SIDE STIFFENER made out of Mild Steel Square Pipe of 25mm and fixing to TABLE 3'X2' WITH DRAWER as shown on Drawing No. FD-1008, & complete all as specified and as directed.

Material and labour LOCK (MAKE : GODREJ) of TABLE 3'X2' WITH DRAWER and fixing as shown on Drawing No. FD-1008 including taking out unserviceable Lock, complete all as specified and as directed.

Material and labour Mild Steel HANDLE of TABLE 3'X2' WITH DRAWER and fixing as shown on Drawing No. FD-1008 including taking out unserviceable Handle, complete all as specified and as directed.

Material and labour for Welding of Broken Leg with Mild Steel Square Pipe of size 25mm (as required) for TABLE 3'X2' WITH DRAWER as shown on Drawing No. FD-1008, &complete all as specified and as directed.

Material and labour removing/scrapping old worn out Paint from TABLE 3'X2' WITH DRAWER (Drawing No. FD-1008) by Sand Paper/ Scrapper and applying Two Coats of OG Synthetic Enamelled Paint (as approved) by Spray Painting Machine, complete all as specified and as directed.

Table 900x 900mm Steel FD-1009

Material and labour TOP of TABLE 3'X3' WITH OUT DRAWER of Prelaminated MDF Board 18/19 mm thick, exterior grade ISI marked (MAKE : GREEN PLY/CENTURY/ARCHIED), providing Teak Wood Beading 5.0 mm thick all round, applying french polish upto the desired finish on beading, as shown on Drawing No. FD-1009 including taking out unserviceable Top, complete all as specified and as directed.

Material and labour for Welding of Broken Leg with Mild Steel Square Pipe of size 25mm (as required) for TABLE 3'X3' WITH OUT DRAWER as shown on Drawing No. FD-1009, & complete all as specified and as directed.

Material and labour removing/scrapping old worn out Paint from TABLE 3'X3' WITH OUT DRAWER (Drawing No. FD-1009) &, complete all as specified and as directed.

Material and labour welding (full round on pipe as a one spot) of broken part of TABLE 3'X3' STEEL as shown on Drawing No. FD-1009, rubbing welded portion to obtain a smooth surface, necessary preperation of surfaces, applying two coats of Syntheic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including taking out unserviceable part, complete all as specified and as directed.

Table Bed Side FD/E6/MAP

Material and labour TOP of TABLE BED SIDE of MDF Board 18/19 mm thick, exterior grade ISI marked (MAKE : GREEN PLY/CENTURY/ARCHIED), providing Teak Wood Beading 5.0 mm thick all round, applying french polish upto the desired finish on beading, as shown on Drawing including taking out unserviceable Top, complete all as specified and as directed.

Material and labour Side / Back of TABLE BED SIDE of MDF Board 18/19 mm thick, exterior grade ISI marked (MAKE : GREEN PLY/CENTURY/ARCHIED), providing Teak Wood Beading 5.0 mm thick all round, applying french polish upto the desired finish on beading, as shown on Drawing including taking out unserviceable side/back, complete all as specified and as directed.

Material and labour UPPER DRAWER of TABLE BED SIDE of MDF Board 18/19 mm thick, exterior grade ISI marked (MAKE : GREEN PLY/CENTURY/ARCHIED) as shown on Drawing including taking out unserviceable Upper drawer, complete all as specified and as directed.

Material and labour LOWER DRAWER of TABLE BED SIDE of MDF Board 18/19 mm thick, exterior grade ISI marked (MAKE : GREEN PLY/CENTURY/ARCHIED) as shown on Drawing including taking out unserviceable lower drawer, complete all as specified and as directed.

Material and labour LEG of TABLE BED SIDE of MS squre pipe 25x25 mm x 1.6 mm as shown on Drawing including taking out unserviceable leg, complete all as specified and as directed.

Table Computer FD/E6/MAP

Material and labour TOP of TABLE COMPUTER of Prelaminated MDF Board 18/19 mm thick, exterior grade ISI marked (MAKE : GREEN PLY/CENTURY/ ARCHIED), providing Teak Wood Beading 5.0 mm thick all round, applying french polish upto the desired finish on beading, as shown on Drawing including taking out unserviceable Top, complete all as specified and as directed.

Material and labour DRAWER made out of Prelaminated MDF Board 18/19 mm thick, exterior grade ISI marked (MAKE : GREEN PLY/CENTURY/ ARCHID) and fixing to TABLE COMPUTER as shown on Drawing , including taking out unserviceable Drawer, complete all as specified and as directed.

Material and labour LOCK (MAKE : GODREJ) of TABLE COMPUTER and fixing as shown on Drawing including taking out unserviceable Lock, complete all as specified and as directed.

Material and labour Mild Steel HANDLE of TABLE COMPUTER and fixing as shown on Drawing including taking out unserviceable Handle, complete all as specified and as directed.

Supply and fix HARD RUBBER SHOE superior quality (as approved) fixing to Leg of TABLE COMPUTER as shown on Drawing including taking out unserviceable Shoe, complete all as specified and as directed.

Loker SKD 562 SKD- 562

Removing old broken hinges and fixing new hinges through gas welding of existing shape and size complete all as specified and directed

Removing of U/S lock and Supply and fix New lock of 7 lever with duplicate key of best quality fancy type of existing shape and size complete all as specified and directed

Removing of unsv/Broken handles and Supply and fix new Chromium Plated handle of existing shape and size complete all as specified and directed

Removing of U/S & rusted legs and Supply and fix new legs made out of MS Sheet 1.6mm thick of existing shape and size complete all as specified and directed

Removing of U/S & rusted shutters and Supply and fix new shutter made out of MS Sheet 1.00mm thick of existing shape and size complete all as specified and directed

Removing of U/S & rusted shelves and Supply and fix new shelves of reqd size & shape, made out of MS sheet 1mm thick of existing shape and size complete all as specified and directed

Material and labour Removing of old worn out paint from exposed steel frame of locker SKD 562 by sand paper/scrapper and applying two coat of hammer tone paint by Spray painting machine as directed by Engr-in-charge.

Meher enterprises

M/S Vijay Kumar Sharma

M/SDoon furnishers