Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹3.5 LAccepted-AOC 02020079 RADHAKRISHNAN K 0202 SUB TREASURY NEYYATTINKARA | L1 | Accepted-AOC lowest rate quated | |
| 2 | L2₹3.7 L+₹15,765.18 (4.44%)Rejected-AOC KOLLAGIL | VIJAYAPURA | KARNATAKA | 586101 | L2 | Rejected-AOC second lowest rate quated | |
| 3 | L3₹4.1 L+₹53,043.22 (14.9%)Rejected-AOC | L3 | Rejected-AOC Third lowest rate quated |
Tender Value
₹4.2 L
EMD Value
₹10,591
Closing Date
24 Oct 2024, 5:00 pmClosed
ARYA MOHAN
OFFICE OF THE ASSISTANT ENGINEER LID AND EW SECTION KUNNATHUKAL
COMPOUND WALL
2024_LSGD_696679_15
01/TNDR/AE/KGP/24-25
Open Tender
Civil Works - Roads
Item Rate
180 days
KUNNATHUKAL GRAMA PANCHAYATH
Please refer Tender documents.
7 documents required · 7 mandatory
₹935
Yes
₹10,591
Yes
15 Jan 2025
16 Oct 2024
26 Oct 2024
16 Oct 2024
24 Oct 2024
16 Oct 2024
Amount
building
2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil
OD172904/2024-2025:Dry rubble masonry with out concrete levelling course with good quality blasted rubble including packing to compactness to lines and levels cost and conveyence of all material labour charges etc. all complete as per direction of Departmental officers at site.
5.1.2:Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size
50.6.1.8:Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in: CM 1:6 ( 1 cement : 6 coarse sand etc complete
50.6.3.2:Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x10 cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level for 10 cm thick wall in : CM 1:6 ( 1 cement : 6 coarse sand) including cost of scaffolding complete
5.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more
13.4.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 coarse sand)
13.33.2:Pointing on stone work with cement mortar 1:3 ( 1 cement : 3 fine sand):Raised and cut pointing
13.43.1:Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer
13.60.1:Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work
2.25:Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.
10.25.2:Item Shifted to Sub head 14 as item 14.73 Item Shifted to head 14 as item 14.74 Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
16.68:Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M - 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.
OD172942/2024-2025:Supplying and fixing granite name board 75 x 60 cm engraving letters etc. complete as per direction of engineer in charge
SAJU S
Balaraj.J
Bidder Name
SAJU S
AJAYAKUMAR S
Balaraj.J
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1086825.pdf
boq_comp_chart.xlsx
xlsx
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .