PROVN OF FLOOR TILING AND KITCHEN BATHROOM TILING AT BLDG NO P802 02 TO P802 12 TOTAL 11 QTRS AT RANGE LINE OF 13 MAHAR THANPIR IN THE AREA OF AGE BR II AND SPECIAL REPAIRS REPLACEMENT OF CI GI PIPE LINE WITH CONNECTED WORK IN A LINE 05

Amount

M & L for Non - skid Ceramic joint free colour tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

M & L for glazed ceramic colour joint free tiles in vertical surface 450X 300X 7 mm thick / 600 x 300 x 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick backing coat in CM 1:4 including dismantling floor, hearth or wall tiling including cement mortar backing coat and rubbish off the premises complete all as specified and directed.

M&L for Non skid (Matt finish) of joint free (edge cut) coloured ceramic tiles 7 to 8 mm thick (Square / rectangular) polished area of each tile exc 0.18 Sqm and n exc0.36 Sqm as in floors etc laid over and including 15 mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and directed.

All as per item No 3.00 above but in skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick backing coat in CM 1:4 including dismantling floor, hearth or wall tiling including cement mortar backing coat and rubbish off the premises complete all as specified and directed.

Taking down chowkhat or frames with shutters (without taking off shutter from the frame) not exc 1.5 Sqm each complete all as specified and directed .

S & F solid PVC door frame of size, 50x47mm, made out of 5mm thick plain colour PVC sheet, reinforced with MS square tube fixed with screw/plugs to brick walls complete all as specified and directed.

S & F Factory made solid panel PVC shutter 30mm thick (style) for window/ ventilators consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; fully glazing with 3mm thick frosted/ coloured glass pane to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in with and including frame work, hold fast, 02 nos 100mm pvc tower bolt, 02 nos 75mm pvc hinges and 01 nos 100 mm pvc handle at site as per specification & drawing complete all as specified and directed.

S&F Stainless steel butt hinges 100 mm size, medium weight , having flap size 100 mm X 58 mm X 1.90 mm thick and dia of hinge pin 5.6 mm fixed with 8 nos stainless steel screws as per IS 12817 of 2013 complete all as specified and directed.

S&F Aluminium anodised barrel tower bolt of extruded section, 150mm long complete all as specified and directed.

S&F 150mm long aluminium handle, cast type, anodised complete all as specified and directed.

Demolition of cement concrete (un-reinforced) of any description and laid in ground floorts/paving n.exc 150mm thick complete all as specified and directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc complete all as specified and directed.

M&L for cement concrete type B-1, 1:2:4 (20mm graded stone aggregate) 25mm thick as in leveling course including a coat of cement slurry at the rate of 3 Kg per Sqm of flooring etc complete all as specified and directed.

M&L 18 to 20mm thick granite (of any type) pre polished in single piece with front edges rounded, bedded and jointed with grey cement slurry and pointed with white cement (1:2) with admixture of pigment to match the shade of granite stone over 15mm thick screed bed in CM 1:6 including grinding and polishing, and demolition of stone slabs and laid bedded of any description or any thickness in floors, aprons etc complete all as specified and directed.

S & F vitreous china squatting pan (Orissa pattern) long pan including connection to trap, and to flushing pipe , anti-syphonage pipe etc incl making good to floor fixed in repair size 580x440mm white glazed with integral footrest with PVC (SWR) 'P' or 'S' trap complete (excluding flushing cistern and flush) complete all as specified and directed.

S & F in repairs vitreous china wash hand basin, white flat back size 550 x 400 mm (excluding tap) but including brass CP waste coupling 32mm dia with long screwed shank and fly nuts, PVC medium grade 32mm dia waste pipe, chain and plug, porcelain stopper and a pair of MS bracket duly painted with 2 coats of synthetic enamel paint over a coat of primer etc complete all as specified and directed.

S & F in repairs 10 ltrs PVC (White) valve less syphonic action type, flushing cistern low level with inlet ball valve float, handle, Aluminium brackets for bottom support fixing with gitties embedded in wall with drilling machine etc complete all as specified and directed.

S & F in repairs PVC connection 450 mm long with 2 Nos brass check nuts suitable for 15mm bore of pipe with washer complete all as specified and directed.

S & F in repairs tubular towel rail 600 mm long 20 mm dia Brass chromium plated fixed to wall with CP steel screws etc, complete all as specified and directed.

S & F in repairs of chromium plated brass soap dish any type fixed with brass screws complete all as specified and directed.

S & F in repairs brass chromium plated bib tap for iron pipe of 15 mm bore fancy type with crutch or butterfly handle, screwed down high pressure complete all as specified and directed.

S & F in repairs stop/ Angle cock ISI marked cast copper alloy with screw down high pressure with crutch or butterfly handle screwed both ends suitable for iron pipe of 15 mm bore complete all as specified and directed.

S&F 20 mm dia Gun metal, globe or gate valve with iron wheel head, screwed both ends for pipe and fixed to 20 mm dia bore pipe complete all as specified and directed.

S&F swivel neck shower of CP including CP shower arm 195mm long 15mm bore pipe complete all as specified and directed.

S&F in repairs brasss chromium plated long body bib tap for iron pipes of 15mm bore fancy type with crutch or butterfly handle, screwed down high pressure complete all as specified and directed.

S&F in repairs, 15mm bore GI tubing (ISI marked), medium grade with all fittings and concealed in walls and ceilling or laid in flooring including connection etc including taking down old tubing complete all as specified and directed.

S&F in repairs, 20mm bore GI tubing (ISI marked), medium grade with all fittings and fixed to walls and ceiling or laid in floor including taking down existing tubing complete all as specified and directed.

Dismantling and taking down existing water tank and S&F new Rotational moulded polyethylene water storage tanks (ISI marked) (cylindrical vertical with closed top) triple layer of 500 Ltrs capacity including 20mm dia bore PTMT ball valve, hoisted and fixed in position and making all necessary connections with and including connectors of suitable size complete all as specified and directed.

S & F in repairs PVC (SWR) pipes single socketed (ISI Mark) in any length with rubber ring joints fixed to wall (75 mm bore) including taking down complete all as specified and directed.

S & F in repairs 110mm bore PVC (SWR) pipes single socketed (ISI Mark) in any length with rubber ring joints fixed to wall complete all as specified and directed.

S & F in repairs PVC (SWR) bends / elbow 75 mm (ISI Mark) complete all as specified and directed.

S & F in repairs PVC (SWR) bends / elbow 110 mm (ISI Mark) complete all as specified and directed.

S&F PVC (SWR) branch piece (single or double) suitable for 110mm bore pipe complete all as specified and directed.

M&L 75 dia PVC SWR floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.

S&F in repairs 15mm Fancy type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F in repair Stainless steel sink, 1.00mm thick for kitchen or laboratory, with plug, waste fittings, waste pipe, washers, including cantilever cast iron brackets, connecting union etc., overall size 495mm x 420mm with bowl size 410mm x 330mm x 160mm complete all as specified and directed.

M & L for preparation of old decorated surface of walls including washing, rubbing down and stopping and applying 1mm thick wall care putty and one coat of distemper oil emulsion complete all as specified and directed.

M & L for rendering 15mm thick cement plaster in CM (1:6) on brick/concrete surfaces in walls and finishing the surface even and smooth including taking down cement plaster from brick or concrete surfaces of any description including racking out joints hacking for key, scrubbing down with water etc and applying 1mm thick wall care putty and two coats of distemper oil emulsion over a coat of primer complete all as specified and directed.

Material and Labour for preparing old surfaces of ceiling by brooming down or by steel wire brushing and applying one coat of white wash on ceiling complete all as specified and as directed

Material and Labour for preparing old surfaces of walls by brooming down or by steel wire brushing and applying one coat of colour wash complete all as specified and as directed.

M&L for preparation of old painted wooden surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Taking down shutters of any description exc 1 Sqm and not exc 2 Sqm each and refixing in same opening after easing etccomplete all as specified and as directed.

Supply and fix in repair 15mm bore cast copper alloy stop valve, fancy type chromium plated with long shank and cup concealed type screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or union and fixed complete all as specified and as directed.

M&L for Preparation of old painted steel surfaces of any description, over 10cm in width or grith, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L for concealed point wiring with 1.5 Sqmm (Nominal area) PVC insulated, unsheathed FRLS multi stranded copper conductor single core cable 1100 Volt grade drawn through and including PVC conduit of 20 mm dia (ISI marked) with complete accessories, galvanised iron steel sunken boxes suitable for piano type switches, sockets, PVC insulated and unsheathed single core multi stranded copper conductor cable of size 1.5 Sqmm green in colour as earth continuity conductor connected to common earth dolly, including taking down existing point wiring cutting chases for concealed wiring and making good in cement mortar (1:4) to match the existing surfacesand applying surface finises such as distempering etc to match the existing shade of building including taking down existing point wiring cutting chases for concealed wiring and making good in cement mortar (1:4) to match the existing surfacesand applying surface finises such as distempering etc to match the existing shade of building etc complete all as specified and directed for the following :- Note :- (i) The quoted rate is deemed to be included the cost of G I sunken box suitable for piano type switches, sockets etc of any module size & shape. (ii) The quoted rate is deemed to be included cost of cutting chases and making good to match the existing surfaces. (iii) The quoted rate is also deemed to be included the cost of cover plate, blank plate of any type and any module.

One light point controlled by one, one way switch complete all as specified and directed.

One Ceiling/exhaust fan point controlled by one, one way switch complete all as specified and directed.

One 3/5 pin 5 Amps socket outlet point on independent board controlled by one, one-way switch.

One 3/5 pin, 5 Amps socket outlet point on the same board with other switches controlled by one, one-way switch.

One bell/buzzer point controlled by one push button.

One light point controlled by two, two way switches.

All as per item No 43 above here in before but with 2.5 Sqmm (nominal area) FRLS cable PVC for the 15 Amp 3/5 pin socket power point including 2.5 Sqmm copper conductor as per colour coading for earth contineuity complete all as specified and directed.

Supply and fix switch piano flush type polycarbonate single pole one way 5 Amps complete all as specified and directed.

Supply and fix switch piano flush type polycarbonate single pole one way 15 Amps complete all as specified and directed.

Supply and fix socket outlet polycarbonate 2 in 1, 3 pin 5 Amps flush type complete all as specified and directed.

Supply and fix socket outlet polycarbonate 2 in 1, 3 pin 5/15 Amps flush type complete all as specified and directed.

Supply and fix bell push flush type 5 Amps complete all as specified and directed.

Supply and fix Bell electric Ding-ding working on single phase 230 Volts AC Supply complete all as specified and directed.

Supply and fix for Ceiling rose in poly carbonate 3 terminal brass flush type 6 Amps,250 volts AC ISI marked, fixing on 3 mm thick sunmica hylum plastic laminated round sheet 75mm dia complete all as specified and directed.

Supply and fix stepped type Electronic Fan regulator, socket type, 5 steps working on single phase 230 Volts AC Supply on the existing phenolic laminated sheet complete all as specified and directed.

S & F LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F for making ceiling fan hook made out of GI pipe medium grade 40mm dia 4mtr long including MS flat Iron 40x5mm,with nuts,bolts and washers complete including making fixing arrangements on existing wall with Cement mortar (1:4) complete all as specified and directed.

S&F LED tube light fitting 20 Watt industrial batten box type with bipin holders connector block complete with all accessories internally prewired and incl connecting up three core single wire incl 01 no. 20 watt retrofit LED tube rod T8 polycarbonate to be fixed at any height of wall/ceiling complete all as specified and directed.

S & F in replacement of old unserviceable Distribution board (DB) made out of sheet metal enclosure (CRCA sheet) dust and vermin proof SPN 8 way IP 43 (double door) with 200 Amps rated copper bus bar neutral bar ,earth bar ,single pole and neutral 250 volts ,flush to wall complete all as specified and directed.

S & F in replacement of old unserviceable MCBs single pole,6 to 32 Amp 240 volt C-curve 10 KA, complete all as specified and directed.

S & F In replacement of old unserviceable MCBs SPN , 63 Amp, C-curve, breking capacity 10 KA complete all as specified and directed.

S & F Sub main wiring with two runs of single core FRLS PVC insulated and unsheathed multistranded, copper conductor cable of size 6.0 sqmm LT, 1100V grade, down trhough and incl adequate sizes PVC non metallic conduit of 20mm/approprite dia with accessories and fittings and one run of 6.0 sq mm single core multi stranded copper conductor cable as earth continuity conductor. Two runs of cable one run of earth wire and one run of PVC non metallic conduit of 20mm/approprite dia shall be measured as one run length, Cable required for connection to DBs shall deemed to be include and shall not be measured separately. Earth wire shall run inside the conduit pipe including taking down old sub main wireing complete all as specified and directed. Note :- Extra length of cable required for connection to MCBs shall deemed to be included in unit rate.

Supply and fix exhaust fan ,metallic body AC single phase, 230V of size 300mm sweep with blades and frame and louvers, heavy duty complete all as specified and directed.

S&F batten holders (metal ring) PVC / polycarbonate type with back plate, fixing on 3 mm thick sunmica hylum plastic laminated round sheet 75mm dia suitable for LED bulb along with 12Watt LED bulb complete all as specified and directed.

M&L for Earthing complete with galvanized steel earth plate electrode 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to galvanized earth wire of 4 mm dia (up to 7.5 m in length from earth plate ) by means of bolts and nuts checknuts and washers of galvanized iron or steel all as specified and shown in electrical plate no.3 of SSR part I including necessary excavation and earth work in any type of soil PCC 1:3:6 type C1 chamber with RCC 1:2:4 type B1 40 mm thick cover with MS rod 8mm dia 150mm c/c reinforcement both ways, watering funnel, 20 mm dia light grade for protection of earth electrode 20 mm dia for watering complete all as specified and directed and tested on completion.

S&F in repairs Distribution Board, TPN, 4 Way, IP 43 Double door with 200 Amps bus bar, neutral bar, earth bar triple pole and neutral 415 volts, flush to wall complete all as specified and directed.

S & F in repairs Isolator FP 100 Amps 415 Volts complete all as specified and as directed.

S&F Ceiling fan complete with electronic type regulator, down rod, canopy, low noise including capacitor and all accessories 230 V, 1200mm sweep, BEE 5 star rated including making connections from ceiling rose to ceiling fan complete all as specified and directed.

M & L for Excavation in trenches, not exceeding 1.5 M wide and not exceeding 1.5 M depth for foundation, manholes, laying of pipes etc., and getting out in any type of soil complete all as specified and as directed.

Returning, filling in, including spreading, watering and well ramming in layers not exceeding 25cm thick with soils complete all as specified and as directed.

Removing excavated soil material not exceeding 50m and depositing where directed at a lvevel not exceeding 1.5m above the starting point complete all as specified and as directed.

S&F bib taps 15 mm bore, standard, made out of cast iron, any colour, high pressure, screwed for iron pipe or for unions, complete all as specified and directed.

M&L for making hole in existing / new pipe line for connection of distribution pipe line with straight plain brass ferrules screw both end complete all as spesified for the following dia.

(a) 50 mm bore GI pipe

(b) 40 mm bore GI Pipe

(c ) 25 mm bore GI pipe

(d) 20 mm bore GI pipe

(e) 15 mm bore GI pipe

Cutting existing steel tubing for alterations or additions (Each cut measured separately), and inserting necessary GI fitting for connecting of distribution pipe line complete all as specified for the following bore of pipes: -

(a) 50 mm bore

(b) 100 mm bore

Taking up or down (from wall/trenches/floor) existing steel tubing and connections, including removal to store of following sizes:-

(a) 50 mm bore GI pipe

(b) 40 mm bore GI Pipe

(c ) 25 mm bore GI pipe

(d) 20 mm bore GI pipe

(e) 15 mm bore GI pipe

Refixing of old steel tubing and connections in new or old position including cleaning internally and externally, any grade/make in trenches/wall/floor/ceiling including all type of new fittings i.e. sockets, Tee union elbow etc all as specified and directed of following size:-

(a) 50 mm bore GI pipe

(b) 40 mm bore GI Pipe

(c ) 25 mm bore GI pipe

(d) 20 mm bore GI pipe

(e) 15 mm bore GI pipe

Supply , fixing & laying GI tubing medium grade ISI Marked with one socket both end threaded in any length including cutting threading connection including all fittings and fixtures for laid in trenches/ walls all as specified and directed of following size

(a) 50 mm bore GI pipe

(b) 40 mm bore GI Pipe

(c ) 25 mm bore GI pipe

(d) 20 mm bore GI pipe

(e) 15 mm bore GI pipe

Taking out unserviceable Gun metal globe/ gate valve & S&F New Gun metal globe or gate valves, with iron wheel head, screwed both ends for GI pipe and fixed in for following size:-

(a) 50 mm bore GI pipe

(b) 40 mm bore GI Pipe

(c ) 25 mm bore GI pipe

Construction of new valve pit chamber using brick masonry in CM 1:4 including dismantling existing unserviceable valve pit complete with mild steel sheet cover 3 mm thick and angle iron frame of size 40 x 40 x 6 mm duly painted with two coats of synthetic enamel paint over a coat of red oxide primer and including locking arrangement and lifting handle all as specified and shown on drawing brick work of inner inner sof pit shall be plastered in cement mortar 1:4 and threee coats of white wash including earth work excavation and PCC foundation in Cement concrete 1:3:6 complete all as specified and shown on drawing of following sizes.

(a) 380 mm x 380 mm x 450 mm (Internal dimension)

(b) 450 x 450 mm x 600 mm (Internal dimension)

A ONE BUILDERS AND ENGINEERS

M/S GIRI CONSTRUCTION CO.

AMAR NATH SHARMA

RAJENDER CONSTRUCTION CO