Supply,Installation, testing and Commissioning of Audio Visual Equipments at KILA

Amount

Supply and installation of Chairman unit for Conference system with priority button and miimum Speciofication of Outpu Headphone/ Recording: 32 Ω (headphone)/10 kΩ, -20 dB* (recording), unbalanced, mini jack (with VR) Internal speaker: 130 Ω, 200 mW Contact output- 24 V DC, max. 50 mA Control Speech button: Microphone, speaker on-off control by speech switch Priority button: Microphone, speaker on-off, other microphone cutoff, and single-tone chime activation, Goos neck Microphone length of 368 mm for Conference system with miimum Speciofication of - Type Electret condenser microphone, Directivity Unidirectional, Rated Impedance 1.8 kΩ, Rated Sensitivity -37 dB (1 kHz 0 dB = 1 V/Pa), LED Indicator Speech indicator (ring type), Frequency Response 100 - 13,000 Hz, Output Connector Combined type of XLR-4-32, Finish Gooseneck: Stainless steel, black, Other: ABS resin, black. (Make: TOA TS771 & TS 773/ Equivalent)

Supply and installation of Delegate unit for Conference system with miimum Speciofication of Output Headphone/Recording: 32 Ω (headphone)/10 kΩ, -20 dB* (recording),unbalanced, mini jack (with VR)Internal speaker: 130 Ω, 200 mW Contact output: 24 V DC, max. 50 mA Control Microphone, speaker on-off control by speech switch, Goos neck Microphone length of 368 mm for Conference system with miimum Speciofication of - Type Electret condenser microphone, Directivity Unidirectional, Rated Impedance 1.8 kΩ, Rated Sensitivity -37 dB (1 kHz 0 dB = 1 V/Pa), LED Indicator Speech indicator (ring type), Frequency Response 100 - 13,000 Hz, Output Connector Combined type of XLR-4-32, Finish Gooseneck: Stainless steel, black, Other: ABS resin, black. (Make:TOA TS772 & TS 773/ Equivalent)

Supply and installation of 10M Signel extension cord used to connect between the conference system's Central unit and conference units. (Make:TOA YR-770-10M/Equivalent )

Supply and installation of 2 M Signel extension cord used to connect between Delegate units. (Make:TOA YR-770-2M/ Equivalent)

Supply and Installation of Class-D power amplifier with the minimum following specification and all necessary connecting cables with 2x 60 W at 100 V or 4 Ohm or 120 W at 100 V or 8 Ohm in bridge operation. With a high-quality toroidal output transformer Output power (RMS): 2 x 60 W at 100 V / 4 ohms, 1 x 120 W at 100 V / 8 ohms (bridged), Output voltage taps: 100, 70, 50, 35 V; 4 ohms, Load impedance (min.): 4 ohms, 8 ohms (bridged), Line inputs: 2x balanced (euroblock), 2x unbalanced (cinch), Input impedance: 22 kOhm, Input sensitivity: 0 dBV / 1 V RMS, Signal to Noise Ratio:> 98 dB A-weighted, THD: <0.1%, Channel separation:> 65 dB at 1kHz, Frequency response: 50 - 22 kHz +0 / -3 dB, High pass filter: 250 Hz, switchable, Cooling: convection, Protective circuits: overcurrent, overtemperature, DC voltage, Ambient temperature: 0 to 40 ° C, Power supply: 100 - 254 VAC / 50 - 60 Hz, Power consumption (max.): 175 W, or above specification.( Make:APART REVAMP 2060T/Equivalent)

Supply and Installation of designer style ABS cabinet speaker is rated at 30 watts, 100 volt line or 50 watts RM at 16 ohms, with minimum Specification of loudspeaker system 2-way, woofer size 5,25 inch, woofer cone material coated paper, tweeter size 1 inch, mounting system U-bracket, 100V transformer power taps 30 - 15 - 6 - 3 watts impedance (ohms) 16, low impedance dynamic power 80 watts , low impedance RMS power 50 watts, SPL 1W/1m 88 dB, max SPL 1m 107 dB, frequency response 70 - 20K Hz, main construction material ABS plastic, grille main material steel, IP rating 40, Horizontal dispersion angle 1000 Hz 180°, Vertical dispersion angle 1000 Hz 180°, with all required accessories. (Make:APART OVO5T-BL/Equivalent)

Supply and Installation of dual impedance designer style ABS cabinet speaker rated at 6 watts, 100 volt line and 20 watts RMS with the minimum following specification and all necessary connecting cables - loudspeaker system 2-way, woofer size 3 inch woofer cone material coated paper, tweeter size 1 inch mounting system turn / tilt bracket, 100V transformer power taps 6 - 3 - 1.5 watts impedance (ohms) 16, low impedance dynamic power 40 watts, low impedance RMS power 20 watts, SPL 1W/1m 82 dB max SPL 1m 97 dB, frequency response 90 - 20K Hz main construction material ABS plastic, grille main material steel IP rating 40, Horizontal dispersion angle 1000 Hz 180° with all required accessories. (Make: APART OVO3T-BL/ equivalent)

Supply and Installation of 6 input Mixer Accepted Model: Australian Monitor MX61 or other models with equivalent or above specification

Supply, installation, Testing and Commissioning of Anti Mobile and RF interference Cardiodic 21” gooseneck Back Electret condenser microphone with Microphone Base with On/Off Switch & LED having Built-in XLR socket, Frequency response of 20Hz to 20KHz with all necessory accessories. (Make: Studiomaster Flex4/ equivalent)

Supply and installation of complete steel/Aluminium constructed 27 U or higher system Rack with Acrylic Door, lock & Key, and Power Strip for placing all Equipments with all accessories.(Make: NETRACK)

Laser and LED Hybrid Technology Projector, Resolution: 1,280 x 800 pixels (WXGA), Service life: up to 20,000 hours, Brightness: 3,500 lm, Contrast: 20,000:1, IEEE 802.11 b/g/n, compatible with Windows and Mac using additional software and wireless LAN adapter (CASIO YW-40), Interfaces: Computer: 1x 15 pin D-sub (VGA), Digital input: 2x HDMI port, Video input: S-video terminal / RCA pin terminal (composite) Audio:Input terminal: 1x 3.5 mm stereo mini jack; RCA pin terminal (composite), Output terminal: 1x 3.5 mm stereo mini jack (variable audio output), RS-232C (D-Sub 9pin) LAN RJ-45. Warranty: 3 year. (Make: Casio XJ-F210WN/ Equivalent)

Universal Projector Mounting Kit on the Wall/Roof and all necessary accessories.

109" 16:10 screen surfaces, Matt White 220 V Motorised projector screen, Wall/ceiling mounted with remote control.. (Make: Milan/ Elite)

Supply and installation 20 Mtr High–Speed HDMI Cable high−performance, HDMI cable, It supports signals up to 4K@60Hz (4:4:4), Deep Color, x.v.Color™, Lip Sync, 7.1 PCM, Dolby TrueHD, DTS−HD, CEC, Max. Resolution — 4K@60Hz (4:4:4), K–Lock Pull–Resistant, 24K gold–plated Connectors. with Required Accessories. (Make: Kramer C-HM/HM/ Equivalent)

Supply and installation 2 Mtr High–Speed HDMI Cable high−performance, HDMI cable, It supports signals up to 4K@60Hz (4:4:4), Deep Color, x.v.Color™, Lip Sync, 7.1 PCM, Dolby TrueHD, DTS−HD, CEC, Max. Resolution — 4K@60Hz (4:4:4), K–Lock Pull–Resistant, 24K gold–plated Connectors. with Required Accessories. (Make: Kramer C-HM/HM/ Equivalent)

Supply and installation HDMI Passive Wall Plate specification of Front Panel Connection — 1 HDMI (F), Rear Panel Connection — 1 HDMI (F) on a flat, flexible cable, Dimensions — 6.9cm x 4.0cm x 11.4cm (2.71" x 1.57" x 4.49") US; W, D, H.. with Required Accessories. (Make; Kramer, WP-H1M)

Power amplifier Rated Output 240 W, Power consumption 288 W, Input Line in: 0 dB*, 10 kΩ, balanced, screw terminal, 100 V line in: 40 dB*, 330 kΩ, unbalanced, screw terminal, Power remote control: Make contact, Output Loop out: 0 dB*, 10 kΩ, balanced, screw terminal, Speaker out: balanced (floating), High impedance: 42 Ω (100 V), 21 Ω (70 V), Low impedance: 4 Ω (31 V) (Make: TOA P 2240/ Equivalent)

Compact box speakers Rated Input 60 W (high impedance), Power Handling Capacity Continuos pink noise: 60 W (low impedance) Continuos program: 180 W (low impedance), Rated Impedance 8 Ω, 100 V line: 170 Ω (60 W), 330 Ω (30 W), 670 Ω (15 W), 3.3 kΩ (3 W), 70 V line: 83 Ω (60 W), 170 Ω (30 W), 330 Ω (15 W), 670 Ω (7.5 W), 3.3 kΩ (1.5 W) . Make: TOA F 2000/ Equivalent

43'' Professional LED display smart TV (Make: Panasonic TH-43Cs400DX or equivalent)

Tiltable Swing Wall mount for displays,Wall Mount Bracket (Upto 50 Kg Display, VEGA 400x400)

19’’ 9U Amplifier rack, floor stand with 2 nos of tray, AC distribution box with Power Extension Box to provide power supply to system and all necessary accessories.

Supply and Installation of 5 metre cable to connect Desktop computer to Amplifier with necessery connectors

Supply of Two set of Hevy duty 9V Rechargable Batteries with Charger

Supply and laying of high quality XLR cables in existing conduits

Supply and fixing of 25 mm cape-n-case/PVC conduit of approved model, with specials conforming to ISI standard on surface using suitable size fixtures, spacing not exceeding 60cm including making good the damages, colour washing etc.

Supply and fixing 50 x 50 mm PVC Cable Management System with base and lid along with the all necessary accessories conforming to IEC 61084/ BS 476 & 4678 on surface / recess including cutting the wall and making good the damages in case of recessed installation as required.

Supply and fixing of Under Floor Metal Duct System with specials conforming to ISI standard in recess using suitable size fixtures, making good the damages.

Supply and drawing 650/1100 V grade PVC insulated stranded single core copper conductor cables existing surface / recess conduit as required including giving necessary connections of the following sizes. 1.50 sq mm 2 run

Supply and laying of 10 SWG Copper earthing lead on walls with necessary clamps spacing not exceeding 1 meter with necessary connections as required.

Supply and providing ISI pipe earthing as per IS 3043 CI/GI earth pipe with required filling charcoal around the earth pipe up to a distance of 15cm, filling the rest of the portion with excavated soil, including watering and ramming, providing brick work (20 mm) necessary at the top in 1:6 cement mortar providing cast iron gully trap with GI covering at the top

Mr ALFA Electronics