SPECIAL REPAIR TO BLDG NO P 90 AND P 55 AT MIL STN DHRANGADHRA

Amount

Dismantling of asbests cement (corrugated, semi corrugated, etc) sheets in roof coverings complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of any colour having tensile strenght of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of any colour having tensil strenght of 550Mpa as in roof covering/cladding wall, fixed with self tapping screws as specified.

M&L for plain cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate in foundtion of pole/stay assembly etc including necessary form work, all as specified and directed.

M&L for precast cement concrete block masonar, type B-1, 1:2:4 (20mm graded aggregate) set in cement mortar 1:4 with solid blocks exc 10cm in width and setting in mortar, complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc

S&F Rolled section as in main and cross beam hip and jack rafters purlins where connected to common fafters and running rails and guides for sliding doors fixed with angle cleats or other connecting plates. Gde Fe 410-S complete all as specified and directed.

S&F Rolled section as in main and cross beam hip and jack rafters purlins where connected to common fafters and running rails and guides for sliding doors fixed with angle cleats or other connecting plates. Gde Fe 410-S including one shop coat of zinc chrome primer complete all as specified and directed.

Fixing only Rolled section (items ontained from dismantling) as in main and cross beam hip and jack rafters purlins where connected to common fafters and running rails and guides for sliding doors fixed with angle cleats or other connecting plates. Gde Fe 410-S including one shop coat of zinc chrome primer complete all as specified and directed.

S&F Mild steel for roof trusses (framed), trussed purlins, crane gantires, rails and fasternings and heavy bracket framming (beam, tee, angle, channel or flat sections) including distance pieces, clats etc. and confirm to Gde- Fe-410-0 or Fe 310-0 including one shop coat of zinc chrome primer complete all as specified and directed.

S&F for gusset plates (Plain or chequered) channels, square cut or notched (ordinary and counter sunk foring holes, without any attachement to Fe-290 (Gde E-165).

S&F mild steel bolts, purpose made, with hexagonal or square head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut, exc 30cm long dia of neck in exc 12 n exc 20mm complete all as specified and directed.

M&L for PCC 1:2:4 type B2 using 40mm graded stone agreegate as in Bed block.

M&L for preparation of new steel surface of any description exc. 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.

Demolition of brickwork or stone/boulder masonry, built in cement mortar cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stone work and precast oncrete articles.

M&L for walling of random rubble, uncoursed, well bonded, bedded and solided and slidly hearted, built in CM (1:6) completed as specified and directed.

M&L for walling of random rubble,except stone , uncoursed, well bonded, bedded and solided and slidly hearted, built in CM (1:6) completed as specified and directed. Note:- Stone received from demolition shall be used.

M&L for preparation of new steel surface of any description exc. 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

M&L for 15mm thick rendering in two layers, 10mm thick in CM 1.:6 and 5mm thick in CM 1:4 on stone masonry surface or surface other than fair face of brickwork surface finished fair and even without using extra cement.

M&L for rendering 15mm thick cement plaster 1:6 on stone masonry surface or surface other than fair face of brickwork surface finished even and smooth without using extra cement.

Taking down cement or cement lime plaster, any description on stone walls etc incl raking out joints hacking for key, scrubbing down with water, etc.

M&L for preparing of new plastered or un-plastered surfaces and applying two coats of oil bound distemper over a coat of primer over and including wall care putty complete all as specified and directed.

M&L for preparing new plastered or un-plastered walls surfaces and applying three coats white wash complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying two coats of cement base paint r complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying two coats of Exterior emulsion paint (Apex) over a coat of primer complete all as specified and directed.

S&F, in repair, false ceiling, at any height, 600 x 600mm grid with Armstrong 'Prelude XL 32' grid system and 16mm thick mineral fibre acoustic tile 'RH - 99 Classic lite' with suspension system complete all as specified and per manufacturer's instruction. Make : Armstrong or equivalent as approved by GE.

M&L for 100mm thick cement concrete type B1, 1:2:4 (20mm graded stone aggregate) as in floor finishing cement comcrete surface even and smooth without using extra cement complete all as specified and directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L, Non-skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular), area of each tiles exceeding 0.11 sqm but not exceeding 0.18sqm, in floors etc. set & jointed in net cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:4 complete as specified and directed.

M&L, Non-skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick backing coat in CM 1:3 complete all as specified and directed

M&L for coloured glazed ceramic tiles of size 450 x 300 x 7mm thick on vertical surface such as skirting/dado, incl highlighter patterns complete set and jointed in net cement slurry and pointed in colour cement to match ver 10 mm thick backing coat in CM 1:3 complete all as specified and directed.

Dismantling stone slab and tiles of any description or thickness in floors,aprons etc. laid beeded and jointed and pointed

M&L for machine cut kota stone slab, 550mmx550mm, 20-25mm thick as in flooring laid over and including cement mortar screed bed of 15mm thick in CM (1:4), laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

Only cutting/grinding and polishing of existing Kota stone floor incl repairing (if required) for smooth finish complete all as specified and directed by Engr-in-Charge.

Taking down chowkats or frame of any description n exc 1.5 Sqm each (without taking off shutters from the frames) removing to store complete as specified and directed.

Taking down chowkats or frame of any descrip tion exc 1.5 Sqm each and n.exc 4 Sqm (without taking off shutters from the frames) removing to store complete as specified and directed.

Taking down chowkats or frame of steel windows/ ventilators n.exc 1.5 Sqm (without taking off shutters from the frames) removing to store complete as specified and directed.

S&F, MS doors or gates of angle or other section conforming to Fe 290(Gde E-165) with gusset plates, rails, braces, etc complete including hanging also fastening and fixing complete as specified and directed.

S&F factory made steel ventilators with top hung shutter including hinges, steel peg stay, glazing bars including applying one shop coat of red oxide primer all as specified and directed

S&F, 30mm thick flush shutter with solid core construction with block board core and plywood face panel commercial type on both faces.

M&L for anodised aluminium frame/shutters for doors, windows ventilators with one or more rebates including joining cleat for fixing and suitable handle etc. complete all as specified.

S&F 5mm thick Sheet glass, ordinary quality with and including neoprene beadings in square exc 0.5 sq.m in each pane

M&L for anodised aluminium handles 75 mm size of approved pattern for aluminium windows

M&L for anodised aluminium tower bolts 75 mm size of approved pattern for aluminium windows

S&F, 150mm long floor door stopper of aluminium alloy body and tongue with hard drawn steel springcomplete all as specified and directed.

S&F, stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed to wooden door Shutters/aluminium sliding shutters complete all as specified and directed.

S&F,as in repairs stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed to wooden door Shutters/aluminium sliding shutters complete all as specified and directed.

S&F MS framed work such as grills, guard bars of window, weapon rack stand and similar work with ends of bars shouldered and/ or riveted, or forged into spikes conforming to Fe 290(Gde E-165) complete all as specified and directed.

M&L for 3mm thick sheet glass, ordinary quality and glazing with oil putty in square not exc. 0.5 sq.m in each pane complete all as specified and directed.

S&F, aluminium anodised, barrel tower bolts of extruded section with length of bolt 200 mm and fixed complete all as specified and directed

S&F butt hinges, medium weight, cold rolled, mild steel of size 100 mm complete all as specified and directed.

S&F, 300mm length of bolt aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cost or extraded sections and fixing bolts and sliding bolts of extraded sections or cost aluminium alloy.

S&F, aluminium alloy, anodised, sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy with length of bolt 250 mm and fixed complete all as specified and directed.

S&F, in repairs, 25mm dia, powder coated, fancy type, aluminium decorative tubular curtain rod with decorative ball type side brackets, complete all as specified and directed.

S&F, 18/19mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice laminations and other side balancing white lamination, fixed with screws to timber frame work in cup boards, rebated or flat edged complete all as specified and directed.

M&L for 6mm thick external teak wood lipping fixed to18/19mm thick block or Veneered particle boards with nails complete all as specified and directed.

S&F continuous (piano) hinges, mild steel bright finish or electrogalvanised, width of flap 40 mm complete all as specified and directed.

S&F hasp & staples 125mm in size, safety type alu. anodised fixed with screws.

Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed.

S&F 100 mm size extruded aluminium alloy handles, fabricated type, anodised.

S&F extruded aluminium alloy handles, fabricated type, anodised of size 150 mm complete all as specified and directed.

M&L for chequered cement concrete tiles 30 cmx30 cmx25 mm thick, with grey cement and no pigment, set, jointed and pointed in neat cement slurry over and including 20 mm thick screed bed in cm (1:6) complete all as specified.

S&F Machine pressed precast concrete interlocking paver block any shape & size conforming to IS 15658-2006 of 60 mm thickness ,M-35 Grade ,with grey cement & pigment interstion filled with sand and bedded with and including 50 mm thick sand cousion laid uniformly and duly compected with plate vibrator complete all as specified & as directed.

S&F Solid PVC Door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, supplying and fixing in opening as per specifications and drawings complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying and fixing in the frame at site as per specification & drawing complete all as specified and directed by Eng-in-Charge.

S&Fas in repairs vitreous china squatting pan, 'Orissa’ pattern, white of size 580mm x 440mm with integral foot rest, P or S trap (excluding flushing cistern and flush pipe) complete all as specified and directed.

S & F in repairs vitreous china wash hand basin, white, flat back of size 550x400mm with and including CI brackets, 32mm bore brass CP waste coupling Inlet/ outlet, PVC flexible pipe, 600mm size for 15 mm bore pipe with brass nut and washers etc complete.

S&F, in repairs, 10 litres capacity, PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet ball valve, float and handle including brackets and connection to pipe or lever etc. complete all as specified and directed.

Viterous china Urinals, half stall large coloured including connection PVC waste pipe of adequate dia and size CP grating with hole and urinal push valve including fittings fixed in repair complete all as specified

S&F, in repairs, brass chromium plated, tubular towel rail 20mm dia, D type, 60 cm long between flange complete all as specified and directed.

S&F, in repairs, 15mm brass chromium plated fancy type bib cock with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed.

S&F, in repairs, 15mm stop valves/angle valve fancy type brass chromium plated for iron pipe or for unions and fixed to 15mm bore pipe, complete all as specified and directed.

S&F 40mm, low density polyethylene pipes (LDPE) of pressure rating 6 kgf/Sqcm fixed complete to walls, ceilings or in floors etc.

S&F PVC connections 15mm size with PTMT nuts of length 450mm

Taking up or down steel tubing and connections for 15mm bore of pipe complete all as specified and directed.

Taking up or down steel tubing and connections for 20mm bore of pipe complete all as specified and directed.

S&F steel water tubes, medium grade, galvanized, with all fittings and fixed to walls and ceilings or laid in floors for 15mm bore of pipe complete all as specified and directed.

S&F steel water tubes, medium grade, galvanized, with all fittings and fixed to walls and ceilings or laid in floors for 20mm bore of pipe complete all as specified and directed.

Refixing old serviceable steel tubing and connections in new or old position (walls, ceilings, floors etc.) for 15mm bore of pipe complete all as specified and directed.

Refixing old serviceable steel tubing and connections in new or old position (walls, ceilings, floors etc.) for 20mm bore of pipe complete all as specified and directed.

Excavation in trenches not exc. 1.5 m wide and not exc 1.5 m in depth for foundation, for laying / taking down sewage / water supply lines, forming bottom surfaces to required slpoe & gradient and not exc 10 sqm on plan and not exc 1.5 m in depth and getting out in hard dense soil complete all as specified and directed.

M&L for cement concrete (1:3:6) type C-2 using 40 mm graded stone aggregate as in bed to drain pipes including packing under and hunching against the sides of pipe after they are laid and tested for 200mm bore of pipe complete all as specified and directed.

Returning, filling in the any type of soil including spreading, levelling. Watering and well ramming in layers not exceeding 25cm thick each layer complete all as specified and directed.

Removing the excavated soil to a distance not exceeding 50 metres away depositing where directed at a level not exceeding 1.50 metres above the starting point complete all as specified and directed.

Cutting chases in stone walls , pinning in, making good to facing where required and pointing in cement mortar (1:3) for concealed water tubing or concealed conduit wiring, etc and making good, cutting exceeding 10cm girth but nexc 20 cm , complete all as specified and directed.

S&F in repair rotational moulded polyethylene water storage tanks of capacity 500 Litres (Cylendrical vertical with closed top)hoisted and fixed in position all as specified in SSR-Part-I including disconnecting and removal of old U/S PVC tank.

Dismantling of 100mm dia cast iron , SGSW, PVC or reinforced concrete drain pipes jointed in neat cement mortor and taking out of trenches if required.

S&F 75mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints laid in trenches or in floors/ walls

S&F 110mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints laid in trenches or in floors/walls

S&F in repairs 20mm dia ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 15mm-142 gms/ 20mm-210 gms/25mm-455gms/ 40mm- 690 gms) all as specified and directed

M&L for 50mm thick cement concrete 1:3:6 type C1, using 20mm graded stone aggregate as in plinth protection, finishing cement concrete surfaces even and smooth without using extra cement complete all as specified and directed.

Demolition of cement concrete (Un-reinforced) in ground floors n.exc 15cm thick (above or below grnd level)

S&F 2nd class hard wood, Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed

M&L for preparation of old painted Steel and iron surfaces of any description, not otherwise described over 10 cm width or girth and painting with a coat of sythetic enamel paint.

M&L for preparation of new wooden surface of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed.

Dismantling boarding, any description, fixed in any position with nails

Taking down carefully copper/Aluminium point wiring (Light,fan,socket or power) complete including fitting such as switches, socket, bell pushes, ceiling roses, pendants/batten holder, call bell, regulators etc all as specified and directed by Engr-in-charge.

M&L for wiring with and including multistranded copper conductor 1.5 Sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed FRLS cable 1100 Volts grade, ISI marked with valied CML number drawn in and including medium grade PVC casing and capping double lock type 32mm in size, fire resistant, ISI marked including with its fittings and fixtures such as tees, bends, elbows, junction boxes, etc. including multistranded copper conductor 1.5 Sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed FRLS cable 1100 Volts grade, ISI marked with valied CML number as continuity earth wire and including pressed steel sunken concealed terminal box with 3mm thick industrial laminated sheet cover for mounting switches, sockets and fan regulators etc. complete all as specified and directed for the following :- Make of Cable Polycab/Finolex/Havells

(a) One light/fan point controlled by one switch

(d) One multi pin 5 Amps, socket outlet on Independent board.

(c) One 3 pin, 5 Amps, socket outlet on the same board controlled by another switch.

M&L for wiring with and including multistranded copper conductor 2.5 Sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed FRLS cable 1100 Volts grade, ISI marked with valied CML number drawn in and including medium grade PVC casing and capping double lock type 32mm in size, fire resistant, ISI marked including with its fittings and fixtures such as tees, bends, elbows, junction boxes, etc. including multistranded copper conductor 2.5 Sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed FRLS cable 1100 Volts grade, ISI marked with valied CML number as continuity earth wire and including pressed steel sunken concealed terminal box with 3mm thick industrial laminated sheet cover for mounting switches, sockets and fan regulators etc. for one 3 pin, 15 Amps socket outlet point on independent board complete all as specified and directed. Make of Cable Polycab/Finolex/Havells

S&F Switch piano, flush type 5 Amps One Way 230 volts complete all as specified.

S&F Socket outlet 2-in-1 3 pin 6 & 16 Amps flush type 230 volts complete all as specified.

S&F Socket outlet 2-in-1 3 pin 6 Amps flush type 230 volts complete all as specified.

S&F Switch one way 15 Amps flush type 230 volts complete all as specified.

S&F Ceiling rose 3 terminal size 50x65mm surface type 230 volts complete all as specified.

S&F fan regulator stepped type, electronic, flush type on the existing phenolic laminated sheet etc. complete all as specified and directed by Engineer-in-Charge.

S&F Holder PVC body with back plate for batten fitting suitable for LED lamp complete all as specified and directed by Engineer-in-Charge.

S&F LED Adore Lamp 14W, B22 base 6500K CDL type complete all as directed by Engr-In-charge. Make: Havells/Crompton/Bajaj

S&F crystal glass LED tube light fitting of 1x18W with tube rod of 18W T8, 220V, AC decorative box type 4ft. (double side connection with LED driver) with very high efficacy complete all as directed by Engr-In-charge.

M&L in replacement for Sub main wiring complete with FRLS PVC insulated unsheathed stranded copper conductor wire 4.0 Sq mm 02 runs (for Phase & Neutal) along with earth wire FRLS PVC insulated unsheathed stranded copper conductor wire of size 4.0 sq mm wire drawn through in & including PVC casing caping complete all as directed by Engr-In-charge.

S&F MCB SPN 32A, 240 V -10 KA all as specified and as directed by Engineer-in-charge.

S&F MCB SP 6-32A, 240 V -10 KA all as specified and as directed by Engineer-in-charge.

Taking down carefully old unserviceable main switches/ Distribution board any type including fuses MCB etc after removing all connection and making good the disturb surface all as directed by Engineer-in-charge.

S&F Sheet metal enclosure double door for DB's SPN 8 way 240 V having 200 A rated bus bar complete all as specified and directed by Engr-Incharge.

S&F Sheet metal enclosure double door for DB's SPN 12 way 240 V having 200 A rated bus bar complete all as specified and directed by Engr-In-charge.

S&F, flat 2' x 2' PANEL 36W LED fitting with LED prisumatic optival modular luminaire suitable for Reccesses mounting complete with HF electronic driver complete all as specified and directed by Engr-in-charge. Make Havells/Bajaj/Crompton/Philips

S&F 30W New generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high efficient LED as lighting source and PC cover having TOP Opening seperate driver compartment with IP66 protection and impact resistance of IK07 for bldg security light with GI pipe bracket of suitable size for fitting complete all as specified and directed by Engineer-in-charge. Make : Havells/Bajaj/Philips/Crompton

S&F Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe of size 4mm dia galvanised iron complete

Earthing complete with galvanised steel earth plate electrode 60x60cmx6mm thick, buried directly in ground (earth pit not less than 2.25meters deep below ground level) with top edge of the plate not less than 1.5meters below normal ground level, connected to GI wire 4 mm dia as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 connected to DBs all as specified and directed.

Bhumi Construction

Singh Engineer And Contractor