Repair of old Ayurvedic Hospital Building for COVID Isolation Ward at Nahan

Amount

Distempering (Two coats) with oil bound washable distemper of approved brand and manufacture and of required shade on undecorated wall surface to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surfaces free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth priming coat with distemper primer. Upto Floor all level including carriage of materials with in all leads, lifts and other incidentals charges complete as per entire satisfaction of the Engineer-in-charge.

Removing dry or oil bound distemper by washing and scraping and sand papering the wall surface smooth including necessary repair to scratches complete including carriage of materials upto all leads and lifts also and as per the direction of Engineer-in-Charge

Applying Birla white care putty over plaster surface after throughly brushing the surface free from morter drops.dust, loose materials and other foreign matters sand papering smooth to give final finish to the surface complete. including carriage of materials upto all leads and lifts also and as per the direction of Engineer-in-Charge

Applying priming with cement primer coat on new concrete/Masonry/ asbestors cement/plastered surface and including preparing the surface by thoroughly cleaning oil,grease,dirt and other foreign matter and sand papering as required with : Ready Mixed primer including carriage of materials with in all leads and other incidential complete as per entire satisfaction of the Engineer-in-Charge.

Painting two coats(excluding priming coat) on new wood and wood based surfaces with enamel paint to give an even shade including cleaning the surface of dirt, dust and other foreign matter, sand papering and stoping.including carriage of materials with in all leads,lifts and other incidentals complete as per entire satisfaction of the Engineer-in-charge. a)with enamel paint other than white.

Supplying and fixing glass panes with putty and nails including removal of broken glass panes wherever necessary Plain Glass 4 mm thick.complete as per entire satisfaction of the Engineer-in-charge..

Providing and fixing Mild Steel grills of required pattern in steel frames of windows etc.with M.S flats square or round bars with round-headed bolts and nuts by screws plain grills.including all leads ,lifts and carriage of material as per entire satisfaction of Engineer in charge.

Repairs to plaster in patches of 2.50 Sq.M. and under and 10 to 15mm thick including cutting the patch in proper shape and replastering the surface of the wall including disposal of rubbish to the dumping ground within a Lead of 20 metres with:- Cement Mortar 1:5 (One Cement : Five Sand) including carriage of materials with in all leads,lifts and other incidentals complete as per entire satisfaction of the Engineer-in-charge.

Providing and fixing anodised aluminium work for door, window, ventilators and partitions with extruded built up standard tubular and other sections of approved make conforming to IS 733 and IS 1285 (ONe thousand two hundred eighty five) anodised transparent or dyed to required shade according to IS 1868. (One thousand eight hundred sixty eight) (Minimum anodic coating of grade AC 15(Fifteen ) fixed with rawlplugs and screws or with fixing clips, or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rustfree, straight, mitred and jointed mechanically where ever required including cleast angle, aluminium, snap beading for glazinge/ panelling C.P. brass/stainless steel screws. All complete as per architectural drawings and the directions of Engineer-In-Charge. For doors windows and ventilatiors and glazed partitions frames.including all leads, lifts and carriage of materials and other incidental charges complete as per entire satisfaction of the Engineer-in-charge.

Providing and fixing anodised aluminium work for door, window, ventilators and partitions with extruded built up standard tubular and other sections of approved make conforming to IS 733 and IS 1285 (ONe thousand two hundred eighty five) anodised transparent or dyed to required shade according to IS 1868. (One thousand eight hundred sixty eight) (Minimum anodic coating of grade AC 15(Fifteen ) fixed with rawlplugs and screws or with fixing clips, or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rustfree, straight, mitred and jointed mechanically where ever required including cleast angle, aluminium, snap beading for glazinge/ panelling C.P. brass/stainless steel screws. All completeas per architectural drawings and the directions of Engineer-In-Charge. For shutters of doors windows & ventilators including providing and fixing hinges/ pivots and making provisions for fixing of fittingswhere ever required including the cost of PVC/neoprene gaskets as required 9fittings and glazing/ panelling shall be paid for separately)..including all leads, lifts and carriage of materials and other incidental charges complete as per entire satisfaction of the Engineer-in-charge.

P/F 12 mm thick prelaminated board both side bwp phenol bonded exterior/interior grade panalled shutters with frame of first class deodar wood for doors including bright finished/black enamelled iron butt hinges with necessary screws 40 mm thick frame.including all leads, lifts and carriage of materials and other incidental charges complete as per entire satisfaction of the Engineer-in-charge.

Providing and fixing anodized aluminium handles anodised transparent or died to required shade and colour with screws etc. complete including carriage of materials with in all leads,lifts and other incidentals complete as per entire satisfaction of the Engineer-in-charge. 125mm.

Providing and fixing anodized aluminium sliding door bolts anodised transparent or died to required shade and colour with bolts,nuts and screws etc. complete including carriage of materials with in all leads,lifts and other incidentals complete as per entire satisfaction of the Engineer-in-charge.. (a) 250 X16 mm( Two hundred fifty into Sixteen milimeter)

Providing and fixing aluminium Tower botls (barrel type) anodized transparent or dyed to required Shade & colour with screws etc. complete including all leads,lifts and carriage of materials and other incidental charges complete as per entire satisfaction of the Engineer-in-charge. 250x10mm.

Providing and fixing 100mm bright finished brass floor door stopper with rubber cushion screws etc. to suit shutter thickness complete.in including all leads, lifts and carriage of materials and other incidental charges complete as per entire satisfaction of the Engineer-in-charge.

Providing and fixing vitreous china wash down water closet (European type W,C.pan with integral P or S trap including jointing the trap with siol pipe in cement pipe in C.M. 1:1( One cement :One sand ) (seat and cover to be measured and paid for separately) (i) Ordinary closet including carriage of materials upto all leads and lifts also and as per the direction of Engineer-in-Charge

Providing and fixing Orrissa pattern vetreous China water closet squatting pan ( Indian type W.C. pan) size 580mm.(five hundred eighty milimetres) ( earth work, bed concrete, foot rest and trap to be measured and paid seperately).including carriage of materials with in all leads,lifts and other incidentals complete as per entire satisfaction of the Engineer-in-charge.

Providing and fixing C.P. brass bib tap with captain head 15mm dia including all leads,lifts and carriage of materials and other incidental charges complete as per entire satisfaction of the Engineer-in-charge.

Providing and fixing 32mm(Thirty Two milimeter) dia.lead waste pipes for wash besin or sink including brass check nut including carriage of materials with in all leads,lifts and other incidentals complete as per entire satisfaction of the Engineer-in-charge.

Providing and fixing 100mm sand cast iron grating for gully , floor or Nahni trap including all leads,lifts and carriage of materials and other incidental charges complete as per entire satisfaction of the Engineer-in-charge.

Dismantling tiled floors laid in mortar upto floor two level including stacking of serviceable materials and disposal of un-serviceable materials within 20 metres lead (wooden/concrete joists to be measured and paid for separately) including all leads,lifts and carriage of materials and other incidental charges complete as per entire satisfaction of the Engineer-in-charge.

Providing and laying spartic ceremic tiles 5.5mm.thick in flooring (300 x300mm. size) treads of steps laid on a bed of 12mm. thick cement mortar 1:3 (1cement: 3 sand) finished with flush pointing in white cement. including carriage of materials with in all leads,lifts and other incidentals complete as per entire satisfaction of the Engineer-in-charge.

White glazed tiles 6 mm thick in flooring, treads of steps and landing laid on a bed of 12 mm thick cement mortar 1:3 (One cement :Three sand) finished with flush pointing in white cement. including carriage of materials with in all leads,lifts and other incidentals complete as per entire satisfaction of the Engineer-in-charge.

Painting two coats (excluding priming coat)on new steel and other metal surface under coat with ready mixed paint brusing to give an even shade including cleaning the surface all dirt,dust and other foreign matter With white readymixed paint including all leads, lifts and carriage of materials and other incidental charges complete as per entire satisfaction of the Engineer-in-charge.

Applying priming coat over new steel and other metal surface after & including preparing the surface by throughly cleaning oil grease dirt and other foreign matter and scoured with wire brushes fine steel wool scrapers and paper complete with ready mixed priming paint brusing red lead, red- oxide/zink cxide chrome. including all leads, lifts and carriage of materials and other incidental charges complete as per entire satisfaction of the Engineer-in-charge.

Providing and fixing 19mm(nineteen milimetrs) thick commercial board water proff shutters for cupboardsincluding carriage of materials with in all leads,lifts and other incidentals complete as per entire satisfaction of the Engineer-in-charge.

Providing and fixing 2nd class deovdar wood 40mm (forty milimetres) thick wire gauge shutters using galvanised M.S. wire gauge of I.S. gauge designation 85 (eighty five grame) G. with wire of dia 0.56 (zero point fifty six metres) ) m for doors windows including bright finished black enamelled iron hinges with necessary screws including carriage of materials with in all leads,lifts and other incidentals complete as per entire satisfaction of the Engineer-in-charge.

Shakun Kumar Gupta

RAJINDER KUMAR SHARMA

Sanjeev Sharma

Ravinder Kumar

Pratap Singh