PROVN OF OPEN SHED WITH HARD STANDING, STORAGE ACCOMMODATION AND HYGIENE AND CHEMICAL STORE AT MISA CAMP UNDER GE (S) TEZPUR

Amount

S&F steel work in tubular trusses including special shaped washer etc complete using ERW or induction but welded tubes conforming to IS- 1161-1979 grade St-240 complete all as specified and directed

M & L framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc, n.exc 10Kg each brackets, conforming to 290 Gde-E-165(Brackets over 10 Kg each to be measured under "Structural Steel " complete all as specified and directed.

S&F Mild steel screw bolts (machine made), diameter of neck 16 to 20mm, length of bolt exc 22.5cm and n exc 30cm longwith hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut complete all as specified and directed.

S & F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

All as per item no. 4 above but plain in ridges complete all as specifed and directed.

M&L preparation of new steel surfaces and apply Two coats of synthetic enamelled paint over a coat of red oxide primer over 10cm width or girth, complete all as specified and directed.

Excavation in trenches n exc 1.5 mtr depth and n exc 1.5 m wide in soft/loose soil and getting out. complete all as specified and directed.

M&L PCC (1:4:8) type D-2 using 40 mm graded stone agg as in fdn filling mass concrete. complete all as specified and directed.

M&L for RCC 1:1.5:3 using ( 20 mm graded agg) as in foundation, base for column , plinth beam etc. complete all as specified and directed.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of oundation and plinth beams; and similar work; vertical or to batter. complete all as specified and directed.

S&F 10mm dia and over TMT bars as in reinforcement cut to length bent to shape etc as required incl binding with MS wire annealed not less than 0.90 m dia. complete all as specified and directed.

All as per item No-11 above but 5 mm dia and over upto including 10 m dia in stirrups, spacers and bincer etc.

M&L for PCC 1:2:4 type B1 (using 20mm graded agg) as in cooping /benchingcomplete all as specified and directed.

M&L 15 mm thick rendering in CM 1:4 on wall, finished the surface even and fair complete all as directed

M&L for applying two coats of cement base paint on exterior wall includings preparation of new plastered surface complete all as directed.

M&L PCC 1:3:6 type C-2 75 mm thick as using 40mm graded aggregate as in plinth protection /pavement even and smooth without using extra cement.

Surface excavation n exc 30cm deep and averaging 15cm deep and getting out in hard/dense soil complete all as specified and directed.

Removing excavated materials n.exc 50 mtrs and depositing where directed at a level n exc 1.50mtrs the starting point complete all as specified and directed.

Returning/Filling in trenches in layer n exc 25 cm thick including watering well ramming etc. complete all as specified and directed.

M&L for 150 mm thick cement concrete in sub base of floor in cement mortar (1:3:6) type C-2 complete all as specified and directed.

M&L for 100 mm thick cement concrete 1:2:4 type B 2 using 40mm graded stone aggregate as in sub base of foooing complete all as specified and directed..

Forming 12mm thick expansion joints for 150mm thick concrete slab filled with pre-formed bituminous filler and top 30 mm primed and sealed with sealing compound, Grade'A'. complete all as specified and directed.

Surface dressing n.exc 15 cm deep in soft/loose soil complete all as specified and directed.

M&L for RCC M-25(Design Mix) ( 20 mm graded agg) as in foundation, base for column , plinth beam etc complete all as specified and directed

M&L for RCC M-25(Design Mix) ( 20 mm graded agg) as in column, post etc complete all as specified and directed

M&L for RCC M-25(Design Mix) ( 20 mm graded agg) as in roof slab supported on wall, beam, landing, desk slab etc complete all as specified and directed

M&L for RCC M-25(Design Mix) (20mm gradded agg) as Lintel/chajja etc complete all as specified and directed

M&L for RCC M-25(Design Mix) (20mm gradded agg) as Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed

Use & waste of form work of the side of the concrete foundation, footing, base of column rough finished flat surface. complete all as specified and directed.

Use & waste of form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200 mm thick ( Horizontal or sloping). complete all as specified and directed.

Use & waste of form work to the side of the column , rough finished flat surface area. complete all as specified and directed.

Use & waste of formwork to side and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, verhangs etc also plays between floors and beams etc. complete all as specified and directed.

Use & waste of formwork to edge of concrete flats, breks in flooors, openings in concrete walls , floors and roofs and sides of RCC/PCC bands in walls, horizontal or loppin and similar work all exceeding 20 cm wide(Where RCC/PCC band in walls spanning and opening , the formwork soffit only shall be paid for under item 7010 of SSR Part-II, complete all as specified and directed.

M&L brick work using sub class B brick (old size) curved or straight in plan exc 6 mtr mean radius in cm (1:6), complete all as specified and directed.

M&L brick work using sub class ‘B’ bricks (old size) straight or curved on plan to any radius in half brick work built in CM 1:4 complete all as specified.

M&L 15 mm thick plastering on other than fair faces of wall surfaces in cm (1:6) complete all as specified and directed

M&L 5 mm thick plastering on ceilling concrete surface in cm (1:3) even and smooth w/o using extra cement. complete all as specified and directed.

M&L for sand filling/Cushioning under floor or in foundation including watering as required. complete all as specified and directed.

M&L for Polythene film,150 micron thick, laid on a coat of bitumen primer, @ 0.30 to .50 kg per sqm. complete all as specified and directed.

M&L for rendering 20mm thick in cement mortar 1:4 in two layers of 10mm each using WPC in finishing layer on brick or concrete surfaces finished even & smooth ( WPC for finishing layer will be measured and paid seperately as supply only). complete all as specified and directed.

Supply only integral water proofing compound.

15 mm thick screed bed or bedding layer of mortar in CM 1:6 fixing of tiles in floor. complete all as specified and directed.

M&L 10 mm thick rendering in CM 1:4 on brick or concrete surfaces for fixing of tiles in wall. complete all as specified and directed.

M & L for Non - skid Ceramic tiles (joint free, coloured) 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed

M & L for non skid ceramic coloured tiles 300x300x7 to 8 mm thick in floors set and jointed in neat cement slurry and pointed with whie/coloured cement to match. complete all as specified and directed.

S&F for colour Glazed ceramic tiles 450x350mm of 7 to 8mm thick, in dado/skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match. complete all as specified and directed.

Forming Constrution (Dummy) joints 30 mm deep x 10 mm wide, filled with sealing compound grade A. complete all as specified and directed.

M&L for preparation of new plastered surface of ceiling and applying three coats of white wash . complete all as specified and directed.

M&L for preparation of new plastered surface of wall and applying three coats of white wash complete all as specified and directed.

S&F MS Hold fast confirming to Fe-290 Gde E-165. complete all as specified and directed.

M&L PCC (1:3:6) type C-1 as in bed block of hold fast using 20 mm stone agg steps etc. complete all as specified and directed.

S&F Steel window side hung shutters including box type hinges with steel handle and steel pegs stay complete with glazing bars and fly proofing complete all as specified and directed.

S & F 3mm thick figured glass n exc 0.5 sqm in each pane glazing with oil putty complete all as specified and directed.

S&F 3 mm thick ordinary quality sheet glass in squares n exc 0.5 sqm in each pane glazing with oil putty complete all as specified and directed.

M&L for galvanised mild steel wire cloth of 0.56mm dia and average aparure of 1.4mm and fixed in position. complete all as specified and directed.

S & F Pressed steel frames of size 125x60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed complete all as specified and directed.

S&F 2nd class hard wood shutter 35mm thick plain framed, panalled shutter (two panel) with lock rail and panel of 9mm B.W.P commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part-I), kiln seasoned and chemically pressure treated. complete all as specified and directed.

S/F 35mm thick glazed and skeleton shutters open rebated and prepared to receive glass gauge etc. Divided into squares with plain chamfered or rounded, rebated sash bars, sizes of the members of the shutters as specified in SSR Part I, section 8, clause 8.23(a). complete all as specified and directed.

M&L for two coats of synthetic enamel painting to new wooden surfaces over a coat of pink primer including preparation of surfaces area exc 10cm width & girth. complete all as specified and directed.

S&F 300 mm Aluminium alloy anodised sliding door bolt, plate type and fixing clip of sheet cast of extruded section and fixing bolt and sliding bolt of extruded section and fixed in position complete all as specified and directed.

S&F 200 mm aluminium anodised barrel tower bolt, of extruded section and fixed in position. complete all as specified and directed.

M&L for extruded aluminium alloy handle fabricated type of 150 mm long. complete all as specified and directed.

S&F 100 mm Butt hinges medium weight cold rolled mild steel and fixed. complete all as specified and directed.

M&L for preparing new wood based Surfaces of any description, exc 10 cm width or girth and applying two coats of synthetic enameled painting over a coat of pink primer complete as specified and directed

Preparation of concrete roof surfaces applying roof treatment as under:- (a) Applying bitumineous primer @ 0.30 litre per Sqm of surface (Shalitex Primer of STP Limited or equivalent as approved by GE (b) Applying coat of hot applied bitumen 85/25 @ 1.20 Kg/Sq m of surfaces (Make : STP Ltd or equivalent as approved by GE) (c) Laying of APP Modified water proofing membrance with non-woven polyster Reinforcement on hot applied bitumen with 100mm over lap at joints by torching on the transverse direction and 75 mm on longitudinal directional all as per manufacturer's instructions (Make : SUPER THERMOLAY OF STP LTD OR EQUIVALENT IWL/TEXSA) (d) Applying a coat of bitumineous aluminium paint @ 0.10 litre/SM (Super Silver sheild of STP Ltd or equivalent as approved by GE)

M&L for 15 mm thick screed bed in cm 1:3 mixed with WPC as per manufactures instruction finished even and smooth over RCC roof slab without using extra cement (WPC shall be measured seperately). complete all as specified and directed.

S&F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor overall length 140mm complete all as specified. complete all as specified and directed.

S&F for MS 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified

M&L hard core of gauge n'exc 63 mm of broken stone or boulder below Path. complete all as specified and directed.

M&L 15mm thick screed bed in CM 1:6 for laying of floor finish complete all as sfd and directed.

S &F chequered cement concrete coloured tiles (glossy finish) 20cm x 20cm x 25 mm thick set, jointed and pointed in neat cement slurry with grey cement and pigment complete all as specified and directed.

Material and labour for sub main wiring complete with two runs of 6.0 sqmm single core FRLS grade PVC insulated unsheathed cable 1100 volt grade multistranded copper conductor drawn in and including PVC concealed conduit of suitable size(not less than 20 mm width/bore) and accessories surface on wall, roofs etc with two run of PVC insulated copper conductor 6 sqmm single core as earth continuity conductor connected with earth dolly and mains all as specified . (Note;- (i) 2 runs of 6 sqmm cable and 1 run of 4 sqmm single core copper cable and 1 run of non metalic PVC conduit shall be measured as single run. (ii) Cost of cutting chases shall deemed to be included in unit rate.)

M & L for point wiring with 1.5 Sq mm (nominal area) PVC insulated and unsheathed single core FRLSH copper cable 1100 volts grade with multi-stranded copper conductor in and including PVC concealed conduit and conduit accessories alongwith continuous earth wire 1.5 Sq mm PVC insulated and unsheathed single core FRLSH cable 1100 votls grade with stranded copper conductor and connected to common earth dolly, with and including 1.6 mm thick cadmium plated sunk MS pressed steel terminal box fixed with brass screws complete for housing the switches, socket outlets, fan regulators etc. for the following (Rate deemed to be inclusive of cutting chases and making good disturbed surface). (a) one light/fan point controlled by one, one way switch. complete all as specified and directed.

All as per item No 73 but one socket outlet 5 pin 6 amps on independent board.

All as per item No 73 but one 5 amps socket outlet on same board with other switch.

M & L for point wiring with 2.5 Sq mm (nominal area) PVC insulated and unsheathed single core FRLSH copper cable 1100 volts grade with multi-stranded copper conductor in and including PVC concealed conduit and conduit accessories alongwith continuous earth wire 1.5 Sq mm PVC insulated and unsheathed single core FRLSH cable 1100 votls grade with stranded copper conductor and connected to common earth dolly, with and including 1.6 mm thick cadmium plated sunk MS pressed steel terminal box fixed with brass screws complete for one socket outlet 6 pin 15/16 amps on independent board (Rate deemed to be inclusive of cutting chases and making good disturbed surface). complete all as specified and directed.

Supply and fix Modular switch one way 6 Amp. complete all as specified and directed.

Supply and fix modular socket outlet 2 in 1, 3 pin 6 A. complete all as specified and directed.

Material and labour for ceiling rose polycarbonate isolated body 3 ways terminals. complete all as specified and directed.

Supply and fix modular type electronic fan regulator. complete all as specified and directed.

Supply and fix switch outlet 6 pin,16 Amps

Supply and fix Socket 6A/16A - 2in 1, 3 pin combined 2 module,

Supply and fixing modular white cover plate with frame 1 modules complete all as specified and as directed. Make: Havells/Anchor or equivalent make as approved by GE.

Supply and fixing modular white cover plate with frame 3 modules complete all as specified and as directed. Make: Havells/Anchor

Supply and fixing modular white cover plate with frame 6 modules complete all as specified and as directed. Make: Havells/Anchor or equivalent make as approved by GE.

Supply and fixing modular white cover plate with frame 12 modules complete all as specified and as directed. Make: Havells/Anchor

Supply and fixing in replacement of wall mounted LED fitting 20 watts making all connection to ceiling rose complete all as specified and directed.

Supply and fix in replacement of SPN double door MCB distribution board sheet steel, powder coated 8 way fitted with bus bar Neutral link, earth bar and din rail complete all as directed.

S & F in replcement of MCB SPN 240 Volts, 50-63 Amps, 50 Hz, breaking capacity 10KA, C series all as specified and directed

S & F in replacement of MCB SP 6-32 Amps, 240 V, 50 HZ,breaking capacity 10KA, C series all as specified and directed.

Supply, install, testing and commissioning of ceiling fan 1200 mm sweep complete all as specified and directed. Make :Havells Model Spark Deco

Supply and fix exahust fan Single phase 230/240 V of size 300 mm sweep metal body heavy duty turbo HHDEF 900 RPM complete all as specified and directed.

Supply and fix energy efficient 5 star rating electrical geyser, 25 liters capacity along with inlet outlet hot & cold water connection pipe complete all as directed.

M & L for earthing complete with GI earth plate electrode 600 x 600 x 6 mm thick buried directly in ground (earth pit not less than 2.25m deep below ground level ) with top edge of the plate not less than 1.5 m below normal ground level , connected to galvanised earth lead iron wire 4mm dia by means of GI bolts nuts and washers of galvanised iron or steel etc all as shown in electrical plate No.3 including earth work PCC pit and RCC pit cover, funnel with watering pipe ,wire mesh ,alternate layer of salt and charcoal, GI protection pipe light grade and testing on completion all as specified and directed by Engr-in-charge.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm 2 core complete all as speified.

Supply and fix GI pipe of dia 32mm to wall/Pole of light grade with required clamping arrangements to fix with the pole complete and connecting to the existing pipe line all as specified Make : JINDAL/TATA

S&F Steel tubes medium grade galvanised 25 mm bore with all fittings laid in trenches,complete all as specified and as directed.

S&F Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed 25 mm bore,complete all as specified and as directed.

M&L for Brick sub class B locally available best quality laid in trenches with widht equal tolenth of the bricks,above sand cushioning for cable protection,complete all as specified and as directed.

D G Corporation

M/S M.S. ENTERPRISE

Chinmay Traders