Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹79.1 LAccepted-AOC PLOT NO 361 FLAT NO 06 FIRST FLOOR SECTOR 11 HIRAN MAGRI UDAIPUR 313001 RAJ | UDAIPUR | UDAIPUR | RAJASTHAN | 313001 | L1 | Accepted-AOC LOWEST REASONABLE BID | |
| 2 | L2₹83.9 L+₹2.2 L (2.69%)Rejected-Finance 5 508 509 VRAJ VALENCIA SCIENCE CITY ROAD S G HIGHWAY SOLA AHMEDABAD GUJARAT 390060 | AHMEDABAD | AHMEDABAD | GUJARAT | 390060 | L2 | Rejected-Finance NOT LOWEST | |
| 3 | L3₹84.0 L+₹2.3 L (2.78%)Rejected-Finance FIRST B ROAD SARDARPURA NEAR HANUMAN MANDIR JODHPUR 342001 | JODHPUR | JODHPUR | RAJASTHAN | 342001 | L3 | Rejected-Finance NOT LOWEST | |
| 4 | L4₹99.3 L+₹17.6 L (21.6%)Rejected-Finance 0 BEECHPARA DANGAURA MAHENDRAGARH MANENDRAGARH CHIRMIRI BHARATPUR CHHATTISGARH 497442 | KOREA | CHHATTISGARH | 497442 | L4 | Rejected-Finance NOT LOWEST |
Tender Value
₹80 L
EMD Value
₹1.4 L
Closing Date
1 Nov 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE ARMY JODHPUR
CWE ARMY MULTAN LINE ARMY AREA JODHPUR-342010
COMPREHENSIVE REPAIR AND MAINTENANCE FOR ATTENDING DAY TO DAY COMPLAINTS IN SHIKARGARH AREA UNDER GE (ARMY) NO. 02 JODHPUR
2023_MES_603700_4
82324/41/E8
Open Tender
Civil Works
Item Rate
330 days
JODHPUR
Please refer Tender documents.
8 documents required · 8 mandatory
₹1,000
GE (A) NO. 02
₹1.4 L
Yes
10 Nov 2023
18 Oct 2023
3 Nov 2023
18 Oct 2023
1 Nov 2023
19 Oct 2023
Amount
Notes- Applicable for all items:- (a) Establishment of complaint cell:- (i) Complaints cells will be established at each residential/RWAs/Colony and OTM Accommodation (As per locations given by Engineer-in Charge/GE). The numbers of complaints cells in the ibid contract will be two only. (ii) Contractors will deploy manpower/tradesman with requisite tool & plant for smooth functioning of all complaint cells under subject work. The details per complaint cell is as given below :- (aa) Data Entry Operator - 01 per complaint cell. (ab) Attendant - 01 per complaint cell. (ac) Supervisor - As required for management of all the complaint cells under subject tender in consultation with GE/Engr-in charge. (ad) Tradesmen & Helpers - As required for management of all the complaint cells under subject tender in consultation with GE/Engr-in-Charge and will be present in all complaints cells. The numbers of the tradesman shall be adequate to address all the complaints on daily basis. (ae) The Data Entry Operators, Attendants and Supervisors will be deployed from 9AM to 5 PM on all complaint cells to manage the complaints cell.
Notes- Applicable for all items:- (a) Establishment of complaint cell (Contd):- (iii) The contractor will provide compatible computer system, printers, peripheral, consumables, internet connection/Dongle for each complaint cell alongwith requisite furniture for functioning of complaint cell and storage of store as required. (iv) The complaints in the cell will be received through complaint register / site orders book / Verbally / Telephonically / WhatsApp / Mobile / ARMAAN or any other mode/system as evolved and intimated by JE/Engr-in-Charge. The contractor shall take immediate action to register and attend all the complaints. (v) The complaints will be addressed through complaint slips and contractors will prepare abstract of all the complaints received and action taken thereof on daily basis and will submit to JE/Engr-in-Charge. (vi) Feedback :- Complaint slip will be having a feedback system from user which will be obtained for each complaint and will be compiled daily and submitted by contractors to JE/Engr-in-Charge.
Notes- Applicable for all items:- (vii) Dress Code:- (aa) Deployed manpower/tradesmen to attend and resolve the complaint shall wear proper uniform. Dress code for plumber, carpenter, scavenger and Electrician etc. shall be approved by Engr-in-Charge with monogram/badges which shall be fixed on the dress. (ab) The number of workers shall be increased based upon number of complaints and quantum of work involved during working hours as decided by JE/Engr-in-Charge.
Notes- Applicable for all items:- (viii) T&P :- (aa) The contractor is responsible to provide all T& P to all the manpower deployed, items such as Drill Machines, cutters, welding machines, scaffoldings etc as and when required at site. (ab) Any other misc works/services connected with user facilitation as per direction of Engr-in-Charge. (ac) The responsibility of taking the tradesmen to complaint site will be of contractor. (ix) Sign Boards :- For each complaint cell, adequate flex sign board of approved size will be placed in complaint cell by contractor. The content of the flex board will be approved by Engr-in-Charge/GE.
Notes- Applicable for all items:- (b) Penalty Clause Contractors will pay penalty on account of non addressal of complaints in given time frame and quality of feedback as per matrix given below. The penalty will be levied by Engr-in-Charge/GE after ascertaining the quality feedback given by user and time taken to address the complaints and justifiable delay, if any. The penalty matrix is as given below :- PENALTY Time delay Satisfactory Partially satisfied Not satisfied Less than 24 hrs Nil Rs.100 Rs.200 24 hrs to 48 hrs Rs. 200 Rs.300 Rs.400 48 hrs to 72 hrs Rs. 400 Rs.500 Rs.600 72 hrs and more Rs. 600 Rs.700 Rs.800 c) Management of urgent nature of complaints such as leakage, water over flow, sewage, Airlock leakage, No electricity on holiday and after 5 PM till 9 AM everyday will also be the responsibility of contractor. For the same adequate tradesman and helper of lack type etc will be made available in each complaint cell by the contractor. (d) All above aspects shall deemed to have been included in the quoted price by the contractor. (e) Recovery on non wearing of uniform :- The employee and labourers engaged by the contractor under this contract shall wear neat and clean uniforms as approved by Engineer-in-Charge along with name badges, else recovery shall be made @ Rs 100/- per person per day. (f) The quoted rates shall be deemed to be included of all provisions mentioned above. The decision of accepting officer in this regard shall be final and binding and without prejudice to all. No claim/representation shall be entertained in the subject matter.
Notes- Applicable for all items:- (g) Cost of T&P (Incl Ladders) , misc sundry materials , Labours , dresses for labours ,& other safety gears as required shall be deemed to be included in the quoted rates by the contractor for the respective items. (h) The adequet no of workers as required per day to address the day to day maintenance works shall be deployed by contractor. (a) Highly Skilled Plumber/Pipe Fitter (b) Highly Skilled Carpenter (c) Mazdoor/Helper for Pipe Fitter & Carp - (d) Highly Skilled Mason with one Helper - (As & when required) (e) Highly Skilled Welder with one Helper - (As & when required) (f) Highly Skilled Electrician (g) sewer man
Attending complaints of leakage / unserviceable pillar cock, Wall mixer, WHB Mixer, bib taps,two way bib taps, stop valves, 15mm - 20mm dia for making it fully functional and leak proof by carefully including taking down, replacing minor unserviceable parts such as rubber washer, leather washers, jumpers brass 15mm - 20mm size complete all as directed and specified. Note: Major parts such as Spindles / phases of CP pillar cocks, wall mixer, WHB mixer,Two way bib taps,CP bib cocks , Angle cocks replaced if any, the same shall be measured and paid for separately under respective item.
Attending complaints of leakage / unserviceable , low level flushing cisterns, PVC or chinaware for making it fully functional and leak proof by replacing the defective parts such as rubber washers,PVC levers, PVC/ CP knobs if required complete all as directed and specified.
Attending complaints of internal water supply pipes,fittings and bottle traps for removing of blockages etc of any description incl removing & clearing of air locks etc., by pressure pump or any other means including taking down and refixing of pipes & fittings and replacing old unserviceable pipes and fitting with new ones complete all as specified and as directed. Note: New GI pipes replaced if any shall be measured and paid under respective item of this schedule as S&F. This item includes for labour part only for removal of blockages of air lock etc.
Hacking out old broken glass from metal frames incl punching or drilling out old glazing pins or spring clips and providing and fixing new ones where ever reqd all as directed by Engineer in charge.
S&F sheet glass ordinary quality 4.0mm thick and glazing with oil putty or wooden beads in square not exceeding 0.5 sqm in each pane complete all as specified.
S&F sheet glass ordinary quality 4.8mm thick and glazing with alluminium beads in square but exceeding 0.5 sqm in each pane complete all as specified.
S&F sheet glass 4mm thick frosted glass, pin headed type, in square n exc 0.5sqm each pane glazing with oil putty complete all as specified.
Re-securing glass of any description, thickness, size not exc 0.50 Sqm each pane in existing metal frames glazed with oil putty, incl removal of old putty, replacement of unserviceable glazing pins/ spring clips, securing glass with glazing pins and oil putty complete all as specified and as directed.
S&F galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples, fixed in repairs i.e. Incl removal of old unserviceable wire cloth complete all as specified and as directed.
Repair to steel Vents/ Doors/ mild steel chowkats or frames/ grills / window & door shutters by replacing unserviceable hinges , handles , peg stay etc by way of welding etc as required , oiling to hinges, setting right and easing of shutters to function properly and painting at welded portion to match the existing surfaces all as specified and directed.
Welding in repairs exc 2.5cm but n.exc 5cm in length and metal thickness n.exc 6mm of any description and in any position complete all as specified and directed. Note: Supply only hinges etc., shall be measured and paid for separately under respective item.
Resecuring/ re-fixing of wooden / PVC shutters of any description and size not exceeding 2.00 Sqm each including taking down (if reqd), easing and adjusting and refixing where ever required and fixing new steel screws complete all as directed and as specified.
S&F prelaminated particle board interior grade 18/19 mm thick prelaminated one sides with decorative choice lamination as in kitchen cup boards, CB Shutters,, Shelves, partitions, any type of built-in-furniture etc. fixed with screws to timber frame work or with wooden gutties or with PVC Rawl plugs, fixed in repairs complete all as specified and as directed.
S&F in repair (WPC) Wood polymer composite sheet (WPC) Wood polymer composite coated Pre-laminated (one side decorative & other side balancing lamination sheet) density 600 kg/m3, frame of width 150mm & 18mm thickness made out of extruded 18mm WPC sheet and joined with suitable Cement Solvent adhesive and screw.The frame shall be fixed to the wall using 75mm long M.S. Screws through the frame by using(WPC) Wood polymer composite fasteners. A minimum of 3 Nos. of screws to be provided for each vertical member & minimum 2 Nos. for horizontal member etc, complete all as specified and directed.
S & Fin repair Kitchen Cabinet anti fungal,moisture resistence,anti borer,100% water Proof,flame retardant. in required sizes at site made out of 18mm thick 100% Solid WPC Plain board of required size 18mmthick(WPC) Wood polymer composite sheet & provision of shutters made out of 18 mm thick 100% Solid WPC Plain board all required brackets SS screws etc. The panels shall be fabricatedusing adhesive and screws where ever required. as per drawing and specification approved by GE.
S&F Self Closing (Auto)Hydraulic hinges, stainless steel, complete assembly complete all as specified and directed.
S&F 100mm size bright finished chromium plated steel handle of approved shape & design fixed with cadmium coated screws on the kitchen cabint shutters, complete all as specified and directed.
S&F drawer runners folding type with guide channels & sliding channel with approipiate ball bearing/ rollers etc complete to obtain smooth movement of the drawers.
M&L for stainless steel tray as per trade pattern of various sizes for drawer to keep the kitchen utensil directed by Engineer-in-charge
S&F in repair prelaminated particle board interior grade 18/19 mm thick prelaminated both sides with decorative choice lamination as in kitchen cup boards, CB Shutters, Shelves, partitions, any type of built-in-furniture etc. fixed with screws to timber frame work or with wooden gutties or with PVC Rawl plugs, fixed in repairs complete all as specified and as directed.
S&F in repair block board 18/19mm thick grade 2 quality, interior grade, commercial type, fixed with screws to timber frame work fixed in repairs complete all as specified and as directed.
S&F in repair second class hard wood timber framed work ie; plain fillets square, rectangular or triangular in section, wrought, bullnosed, rounded or chamferred on one edge or face complete fixed in repairs complete all as specified and as directed.
S&F in repair 40 mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished,complete all as specified and directed.
S&F in repair drapery (Curtain) rod 20mm dia pipe mild steel powder coated/ PVC Coated fancy type with matching MS brackets of approved design with and incl one pair of Finale/ End Cups (All as per Sample) as in curtain rods, complete all as specified and directed.
S&F in repair continuous (Piano) hinges width of flap 40 mm (when open) , mild steel, bright finish or electro galvanised fixed in repair.
S&F in repair mild steel 150 mm/300mm ordinary rat tail/ Helicle door springs including roller and roller plate complete,steel chowkhats a with necessary flat iron cleat by welding or drilling with necessary nut, bolts etc complete all as specified and directed.
S&F in repair mild steel single action helical hinges 150-200mm long, suitable for 1000-1250mm wide wooden door fixed with steel chowakats etc; complete all as specified.
S&F in repair mild steel sliding door bolts length 250mm, clip type/ bolt type, stove enameled black with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on clips and two on staple plate, complete all as specified.
S&F in repair mild steel barrel tower bolts 200 mm long, stove enamalled black, with bright bolt supplied, complete all as specified and as directed.
S&F in repair mild steel barrel tower bolts 150 mm long, stove enamalled black, with bright bolt supplied, complete all as specified and as directed.
S&F in repair mild steel barrel tower bolts 100 mm long, stove enamalled black, with bright bolt supplied, complete all as specified and as directed.
S&F in repair mild steel pressed handles 150mm size, oval type, stove enamelled black supplied, complete all as specified and as directed.
S&F in repair aluminium anodized barrel tower bolts 200 mm long of extruded section complete all as directed.
S&FS&F in repair aluminium anodized barrel tower bolts 150 mm long of extruded section fixed in repairs complete all as directed.
S&F aluminium anodized barrel tower bolts 100 mm long of extruded section fixed in repairs complete all as directed.
S&F aluminium alloy anodized, sliding door bolts 250mm long with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed in repairs complete all as specified and as directed.
S&F in repair extruded aluminium alloy handles, 150mm long fabricated type, anodized fixed in repairs complete all as specified and as directed.
S&F in repair 150mm hasp and staple, safety type, of aluminium anodisedhinge fixed with screws complete all as specified and as directed.
S&F in repair mild steel cold rolled, medium weight but hinges100mm size complete all as specified directed.
S&F mortice Locks, cupboard, grade I, size 50mm brass with four levers,complete all as specified.
S&F in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 23cm wide with chromium plated bracket guard and railing complete all as specified and as directed.
S&F in repair floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, overall length of cover plate 150.00mm complete all as specified.
S&F in repair buffer stopper (Rubber) fixed with screw in wooden door complete all as specified and as directed.
Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. capacity exc 250 litres and not exc 500 litres complete all as specified.
Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. capacity exc 500 litres and not exc 1000 litres complete all as specified.
S&F in repair PVC covers for water tanks incl hingeing device & hasp and staple for locking of capacity 500 liters to 1000 liters tanks complete all as specified.
S&F in repair PVC waste pipe 32 mm to 40 mm dia size with PVC adopter of length between 60 cm to 120 cm as per site requirement suitable for WHBs / Sinks / urinalsetc fixed in repairs complete all as specified and as directed.
S&F in repair CP Waste fitting with long shank suitable for 32 mm dia bore pipe for WHBs / Sinks etc complete fixed in repairs all as specified and directed.
S&F in repair CP Waste fitting with long shank suitable for 40 mm dia bore pipe for WHBs / Sinks etc complete fixed in repairs all as specified and directed.
S&F in repair waste fitting of PTMT (Half or full threaded) with long shank suitable for 32 mm dia bore pipe for WHBs / Sinks etc (Minimum weight -45 gms) fixed in repairs complete all as specified and as directed
S&F in repair waste fitting of PTMT (half or full threaded) with long shank suitable for 40 mm dia bore pipe for WHBs / Sinks etc (Minimum weight -60 gms) fixed in repairs complete all as specified and as directed
S&F in repair shower rose of 125mm with arm (195mm long with bend of 45 degree with flange) of Brass chromium plated shower rose with any colour for fixing with 15mm pipe all as specified and as directed.
S&F in repair shower rose with arm (195mm long with bend of 45 degree with flange) of PTMT any colour for fixing with 15mm pipe all as specified and as directed.
S&F in repair grating doom of PTMT round or square 125mm dia / size to 140mm dia / size fixed in repairs complete all as aspecified and directed.
S&F in repair CP grating round or square 125mm dia / size to 140mm dia / size fixed in repairs complete all as aspecified and directed.
S&F in repair bib taps cast copper alloy with crutch or butterfly handle, screwed down, screwed for 15mm bore iron pipe or for brass ferrule complete fixed in repairs i.e., incl taking down and removal of old unserviceable bib cock complete all as specified and directed.
S&F in repair bib taps Chromium plated brass/ cast copper alloy fancy type with capstain head, screwed down, screwed for 15mm bore iron pipe or for brass ferrule complete fixed in repairs all as specified and directed.
S&F in repair bib taps long body Chromium plated brass/ cast copper alloy fancy type with capstain head, screwed down, screwed for 15mm bore iron pipe or for brass ferrule complete fixed in repairs all as specified and directed.
S&F in repair two way bib taps Chromium plated brass/ cast copper alloy fancy type with capstain head, screwed down, screwed for 15mm bore iron pipe or for brass ferrule complete fixed in repairs all as specified and directed.
S&F in repair bib Tap, PTMT screwed down high pressure, screwed for 15mm bore iron pipe or for brass ferrule complete fixed in repairs i.e., incl taking down and removal of old unserviceable bib cock complete all as specified and directed.
S&F in repair stop valves/ cocks cast copper alloy with crutch or butterfly handle, screwed down, screwed both ends for 15mm bore iron pipe or for unions complete fixed in repairs all as specified and directed.
S&F in repair stop cocks Chromium plated brass/ cast copper alloy with capstain head screwed down, screwed both ends for 15mm bore iron pipe or for unions complete fixed in repairs all as specified and directed.
S&F in repair Gun metal, globe or gate valve with iron wheel head/handle screwed both ends for 20mm bore irone pipe and fixed all as specified and directed.
S&F in repair Gun metal, globe or gate valve with iron wheel head/handle screwed both ends for 25mm bore irone pipe and fixed all as specified and directed.
S&F angle cock with flange, cast copper alloy chromium plated with capstain head, fancy type screwed down high pressure, screwed for 15 mm bore iron pipe or for unions, fixed in repairs complete all as specified and directed.
S&F in repair nipple suitable for HDPE Water tanks minimum weight 15mm -38grms all as specified and directed.
S&F in repair basin mixer (center hole) cast copper alloy chromium plated with capstain heads, fancy type screwed down high pressure, with or without letters "Hot or Cold" with long screwed shanks and flynut screwed for 15 mm bore iron pipe or for unions, fixed in repairs, complete all as specified and directed.
S&F in repair wall mixer (side Hole) telephonic with provn of flexible tube & hook cast copper alloy Chromium Plated with capstain heads, fancy type screwed down high pressure, with or without letters "Hot or Cold" with long screwed shanks and flynut screwed for 15 mm bore iron pipe or for unions, fixed in repairs, complete all as specified and directed.
S&F in repair wall mounted sink mixer with brass casted spout for kitchen sink cast copper alloy chromium plated with capstain heads, fancy type screwed down high pressure, with or without letters "Hot or Cold" with long screwed shanks and flynut screwed for 15 mm bore iron pipe or for unions, fixed in repairs complete all as specified and directed.
S&F in repair stop cock cast copper alloy cast copper alloy, chromium plated, screwed down high pressure, fancy type with long shank and cup (concealed type), screwed both ends for 15mm bore iron pipe or for union and,complete all as specified and as directed.
S&F in repair vitreous china wash hand basin white flat back size 550 x 400 mm including PVC waste pipe 32 mm bore and CP Waste coupling with and incl a pair of suitable mild steel brackets, fixed all in repairs, including cutting for or pinning in and making good disturbed portion as reqd complete all as specified .
S&F in repair vitreous china squatting pan of Orissa patten size 580 x 440 white, front or back inlet with integral footrest including cast iron 'P' or 'S' trap and connection to trap and to flushing pipe,anti-syphonage pipe, etc,,& making good to floor in CM 1:3 or Cement concrete 1:2:4 all as directed and specified.
S&F in repair Sink (Kitchen sink) made of Stainless steel 1.00mm thick with plugs, washers and PVC waste pipe & CP Waste 40mm/ 32mm size as approved incl bedding in cement mortar on to dwarf walls or incl fixing cantilever brackets and connecting union to pipe overall size 915 x 460mm with bowl size 410 x 330 x 160mm with drainage board,incl removal of old unserviceable sink of any description & size complete all as specified & as directed.
S&F in repair of stainless steel plate rack, as in repairs, made out of 0.63 mm thick sheet of size 750x900x250mm (appx.), as per standard pattern and design (approved quality) with plugs, screws, washers etc complete all as directed. Note : Weight of plate rack shall not be less than 7.5kg each.
S&F in repair of stainless steel plate rack, as in repairs, made out of 0.63 mm thick sheet of size 750x600x250mm (appx.), as per standard pattern and design (approved quality) with plugs, screws, washers etc complete all as directed. Note : Weight of plate rack shall not be less than 5.0kg each.
S&F in repair vitreous China wash down water closet pan (Pedestal Pattern), white including white plastic seat cover with mild steel CP hinging device, suitable brass CP wash jet with 1.00 to 1.50m long tube incl making connection to inlet flush pipe, & to 'P' or 'S' drain trap, incl supply of long special 'P' or 'S' trap,complete and making good the disturbed portion etc. all as specified and directed.
S&F in repair PVC valveless, syphonic action type flushing cistern, low level 10 ltr capicity Dual Flush Mechanic incl, PVC flush pipe 32 mm bore and mild steel brackets of angle iron 25 x 25 x 3 mm, oval all length 20 cm with red-oxide primer complete all as specified incl taking down any type of flushing cistern and making good the disturbed surfaces in CM 1:3 complete all as specified and directed complete all as specified, fixed in repairs
S&F in repair 600 mm long PVC connection with PTMT nuts on both ends for 15mm bore pipes of approved quality complete and,all as specified and directed,
S&F in repair 450 mm long PVC connection with PTMT nuts on both ends for 15mm bore pipes of approved quality complete and,all as specified and directed,
S&F in repair plastic water closer seat, white colour, closed pattern with flat or recessed bottom, and cover and mild steel chromium plated or aluminised hinging device complete fixed in repairs.
S&F in repair hinging device chromium plated for plastic water closet seat suitable for existing size and design,complete all as specified and directed.
Taking down 15mm bore steel water tubing and connections etc, including cleaning for refixing or removal from site complete all as specifide.
All as per item No.83.00 here-in-above, but 20 mm bore pipe.
All as per item No.83.00 here-in-above, but 25 mm bore pipe.
S&F 15mm bore steel water tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floor etc,including necessary cutting chasing, pining & etc., and making good disturbed surface as per existing, complete all as specified.
All as per item No.86.00 here-in-above, but 20 mm bore pipe.
All as per item No.86.00 here-in-above, but 25 mm bore pipe.
Refixing old GI water tubing of 15 mm bore, medium grade including all fittings such as bends, tees, short pieces, connectors, elbows, reducers, union, sockets etc fixed to walls, ceiling or laid on floors including necessary cutting chases & testing complete all as specified and as directed.
All as per item No. 89.00 here-in-above, but 20 mm bore GI tubing
All as per item No. 89.00 here-in-above, but 25 mm bore GI tubing
S&F in repair rotational moulded polythene water storage tanks, three layer, white coloured (cylinder vertical with closed top) of capacity 500 ltrs, double walled hoisted and fixed in position including 15/20/25mm bore ball valves (Minimum weight 15mm-142gms/ 2 0mm-210gms./ 25mm-455gms) high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe all as specified in SSR Part-I , including old u/s existing tank, complete all as specified and directed.
All as per item No. 92.00 here-in-above, but 1000 liter tank capacity.
S&F in repair 40mm bore bottle traps, chromium plated brass body for wash basins with inlet and outlet screwed for pipe or connection including necessary packing, union and cap and fixed, complete all as specified and directed.
S&F in repair PTMT Jet Spray with 1.5 m long flexible tube suitable for 15mm bore pipe or socket complete fixed in repairs all as specified and as directed.
S&F in repair PTMT ball valve 20 mm bore high pressure complete with HDPE ball & Aluminium rod (Apoxy coated) all as specified and as directed.
S&F in repair PTMT ball valve 25 mm bore high pressure complete with HDPE ball & Aluminium rod (Apoxy coated) all as specified and as directed.
S&F brass spindle / phase for 15mm dia CP wall mixer, CP WHB mixer, CP two way bib taps,CP bib cocks/ CP pillar cocks / CP angle cocks etc complete all as specified and directed.
S&F Brass spindle / phase for 15mm dia CP concealed stop cocks etc complete all as specified and directed.
S&F in repair PVC bath mirror cabinate box type with shutter of overall size 450mmx350mm complete all as specified and as directed by Engineer in charge.
S&F in repair deco door seal bottom brush dust stopper strip aluminium plate with nylon brush for cover the bottom door gaps between 20-25mm including fixing with steel screws etc; complete all as specified and as directed.
S&F in repair CP helth faucet with 15mm bore flexible pipe of 1.50mtr long complete all as specified and as directed by Engineer in charge.
Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc 1.5 sqm but not exc 4.00 sqm each and removing from site or to store, complete all as specified and as directed.
Taking down chowkhats or frames with shutters (without taking off shutters from the frames) not exc 1.5 sqm each and removing from site or to store, complete all as specified and as directed.
Taking down shutters any description exc 1.00 sqm but not exc 2.00 Sqm each and removing from site or to store, complete all as specified and as directed.
Taking down shutters any description exc 1.00 sqm but not exc 2.00 Sqm each and refixing the shutter in same opening after easing and adjusting, complete all as specified and as directed.
S&F of pressed steel framed made out of 1.25mm thick MS sheet, of size 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc, complete all as specified and as directed.
S&F of pressed steel framed made out of 1.25mm thick MS sheet, of size 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc, complete all as specified and as directed.
M&L for cement concrete (1:3:6) type C-1 using 20 mm graded stone aggregate as in fillings and mass concrete, filling backs of chowkats etc., complete all as specified and as directed.
M&L for cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate as in lintels upto 1.50 m clear span, cills , steps, seismic and other similar bands, copings, kneelars, apex stones, bed plates, bed blocks of hold fasts etc including necessary form work , complete all as specified and as directed.
S&F of factory made 35 mm thick plain framed, panelled shutters (two panel) with 2nd class hard wood rail and style with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated, complete all as specified and as directed.
S&F of factory made 35 mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) kiln seasoned and chemically pressure treated , complete all as specified and as directed.
S&F of Factory made steel window box type using ERW hollow 'P' section comprising double frame for and including gauged and glazed Skeleton shutter jointed internally with flat iron 40x4mm complete including grill of 8/10mm square bars as directed by Engineer incharge, fixed horizontally @ 10cm c/c, hinges, handle, tower bolts, stops, lugs etc. (with provision of fixing for cooler if required) all as shown on drawing No CEJZ/TD/20 sheet 1/3 to 3/3 fixed in repairs i.e, incl taking down and removal of old steel windows from site or to store, complete all as specified and as directed. Note:- Guard bar/ grill shall be measured and paid separately under respective item of Sch 'A'.
M&L for fabrication of aluminium powder coated window any pattern & design (openable with hinges, sliding, tilt and turn, casement , fixed type, villa type, ventilators) fabricated with anodized aluminium rectangular or any type section in frame with approved design & patterns including provn of fixing galvanised mild steel wire cloth on the outer side of frame etc; fixed in position, complete all as specified and as directed. Note:- Glass pane & galvanised mild steel wire cloth shall be measured and paid separately under respective Items of Sch 'A'.
S&F of galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples, complete all as specified and as directed.
Mild steel round bars welded to steel windows or ventilators as in guard bars framed or unframed, complete all as specified and as directed. Note:- Guard bars shall be factory welded & given one shop coat of red oxide or zinc chromate primer. Cost of factory welding & Shop coat of primer is deemed to be included in quoted rates.
S&F of factory made solid panel PVC door shutters 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing, complete all as specifiied & directed.
S&F of solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing, complete all as specifiied & directed.
S&F of 100 mm size PVC/ Stainless Steel (as approved by Engineer incharge) butt hinges , complete all as specified and as directed.
S&F mild steel door handles, stove enameled black, 150 mm long and fixed with steel screws, complete all as specified and as directed.
S&F of mild steel barrel tower bolts, stove enameled black, with bright bolt, 150 mm long and fixed with steel screws, complete all as specified and as directed.
S&F of 300 mm long mild steel, sliding door bolt, plate type, stove enameled black, with bright bolt not less than 12 mm dia with and including bolts and nuts, complete all as specified and as directed.
S&F of alluminium anodised handles 150 mm long fixed to windows, complete all as specified and as directed.
S&F Aluminium anodised, barrel tower bolts 150mm long of extruded section and fixed , complete all as specified and as directed.
S&F Aluminium alloy, anodised, sliding door bolt 300mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy, complete all as specified and as directed.
S&F of mild steel rat tail rod pattern helical door spring of size 300mm including roller and roller plate fixing to iron frame by welding , complete all as specified and as directed.
Dismantling wrought iron or mild steel work of any description and in any position not otherwise specifically provided for (framed/ unframed work), complete all as specified and as directed.
S&F of framed work as in doors chowkats of MS angle iron or MS hollow square/ rectangular any type/ size with gusset plates, rails, braces,cooler stand, chajja framed complete drilled for fixing of door etc; to be prepared for hanging with and including hold fasts and locking arrangements confirming to FE- 290 (Gde-E- 165) , complete all as specified and as directed.
S&F of powder coated aluminium anodised deco grill weighing not less than 1.40 kg/ sqm and fixing necessary joining cleats/ frame etc; , complete all as specified and as directed.
Preparing new or previously untreated surfaces of wood and wood based material of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and as directed.
Preparing new or previously untreated surfaces of steel or iron work of any description and girth over 10cm and applying two coats of synthetic enamel paint complete all as specified and as directed.
Demolition of cement concrete (unreinforced) in ground floor not exceeding 15cm thickness below or above ground level including floor finishes and removing debris from the site all as specified and as directed.
Dismantling glazed tiles/ kota stone/ terrazzo tiles any type as in dado/ skirting etc; including cement mortar bedding ( but not backing ) complete all as specifide.
M&L for plain cement concrete 1:2:4 type B0 using 12.5mm graded stone aggregates as over roof for making good depression/ undulation to make the existing roof surfaces as filling in depression of roof slab/ floor padding/ roof kerbs rounded or chamfered on edges coping etc; complete all as specified and as directed.
Demolition of cement concrete of any description and in any position not otherwise specifically provided for (such as copings, bands of any type, roof padding, kerbs, sunken etc; overall thickness and removing the dust debris etc to a distance not exc 250 meter from site and disposing the same complete all as specified and as directed by Engineer in charge.
M&L for carrying out water proofing treatment for sunken portion in the following stages - (i) Taking down of existing sunken slab treatment from the sunken portion and cleaning the surfaces washing down with water and rubbish of the pemises , cleaning and filling cracks with sealing compound, brushing neat cement slurry @ 3.00kg/sqm and grouting 25mm thick cement concrete type B-0 (1:2:4) using 12.5mm graded stone aggregate on sunken slab portion and finishing the top surfaces even and smooth without using extra cement. (ii) M&L for two coat of acrylic cementitious water proofing coating and followed by a overlay protective screed (10mm thick cement mortar (1:4) along with liquid water proofing compound approved make as per manufacturer's instructions) on top surfaces of sunken slab after preprations as mentioned above. Method of application for acrylic cementitious water proofing coating achieved as per manufacturers instruction complete all as specified and directed.
M&L for cement concrete type E-2, 1:5:10 (40mm graded crushed stone aggregate) as in sunken portion complete all as specified.
M&L for Vitrified ceramic tiles 10mm thick (square/ rectangular) area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer in CM 1:4 complete all as specified and as directed.
M&L for Vitrified ceramic tiles 10mm thick (square/ rectangular) as in skirting / dado, cut out of ceramic tiles of size not exceeding 0.36 sqm, (Matching with floor tile of the same room) set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM 1:4 complete all as specified and as directed.
M&L for non skid ceramic tiles 7-8mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer in CM 1:4 complete all as specified and as directed.
M&L for non skid ceramic tiles 7-8mm thick (square/ rectangular) as in skirting / dado, cut out of ceramic tiles of size exceeding 0.11 sqm but not exceeding 0.18 sqm, (Matching with floor tile of the same room) set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM 1:4 complete all as specified and as directed.
M&L for non skid ceramic tiles 10mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer in CM 1:4 complete all as specified and as directed.
M&L for non skid ceramic tiles 10mm thick (square/ rectangular) as in skirting / dado, cut out of ceramic tiles of size exceeding 0.18 sqm but not exceeding 0.38 sqm, (Matching with floor tile of the same room) set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM 1:4 complete all as specified and as directed.
M&L for non skid ceramic coloured tiles of approved shade and pattern, 7 to 8 mm thick , area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm laid in floor, set and jointe (square/ rectangular) in neat cement slurry and pointed in coloured cement to match over and including 15mm thick screed bed or bedding layer in CM 1:6 complete all as specified and as directed.
M&L for glazed ceramic coloured tiles of approved shade and pattern of size 350x 250x7mm/ 450X350X7mm/ 300X450X7 to 8mm thick or any other nearer size as approved by Engineer incharge in vertical surface set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10mm thick rendering in CM 1:4 as in backing coat of tiles complete all as specified and as directed.
M&L for 16 -18mm thick granite (colour as approved) work (table rubbed and polished) in steps, shelves, jambs, pillars, window-cills, cooking platforms (vertical/ horizontal) and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 10mm thick screed bed or bedding layer in CM 1:4 complete all as specified and as directed.
M&L for machine cut kota stone slab flooring 18-20 mm (+ 2mm) thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing over and including 15mm thick screed bed or bedding layer in CM 1:4 complete all as specified and as directed.
M&L for mirror polished machine cut kota stone slab 15-16 mm thick in riser of steps, skirting, dado and pillar laid over and including 10mm thick rendering in CM 1:4 and jointed complete all as specified and as directed.
M&L for cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate as in plinth protection, 50 mm thick, surfaces finished even and fair without using extra cement including provision of construction joints complete all as specified.
Dismantling of stone/ brick work masonry, built in cement mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stone work, serviceable stone aside for reuse and removing unserviceable material in low laying area complete all as specified and as directed.
M&L for squared rubble walling jodhpur type, brought upto course, well bonded bedded and solidly hearted, built in cement mortar 1:6 complete all as specified and as directed.
Complete item -ditto- all as per above item No. 51.00 but, except stone complete all as specified and as directed.
Extra over for hammer dressing to face stones with maximum depression on face from a straight edge not exc 20mm and dressing face beds and joints as specified to squared rubble walling,Jodhpur type, brought upto courses all as specified and as directed.
Dismantling cast iron work of any description and in any position complete all as specified.
S&F 100mm bore cast iron soil, waste and vent pipes (sand cast pipes) in any length with or without ears, laid in trenches or in floor etc; complete all as specified.
S&F 100mm bore cast iron soil, waste and vent pipes (sand cast pipes) in any length with or without ears, fixed to walls etc; complete all as specified.
S&F 75mm bore cast iron soil, waste and vent pipes (sand cast pipes) in any length with or without ears, laid in trenches or in floor etc; complete all as specified.
S&F 75mm bore cast iron soil, waste and vent pipes (sand cast pipes) in any length with or without ears, fixed to walls etc; complete all as specified.
S&F 100mm bore pipe cast iron 'P' or 'S' trap, complete all as specified.
S&F 75mm bore pipe cast iron 'P' or 'S' trap, complete all as specified.
S&F 100mm bore pipe cast iron cowls, complete all as specified.
S&F 75mm bore pipe cast iron cowls, complete all as specified.
M&L cast iron up to 150mm bore fittings of Bends (any type, radious and angle) tapers any type, (straight, bend, increasing, decreasing or double socket etc.) Tee pieces, single branch, 'Y' junctions, double branch, cross (all sockets or socket and spigot) collars, caps and plugs etc; complete all as specified.
M&L 100mm bore cast iron pipes and fittings joints or connections are filled/ sealed properly by epoxy sealant of ISI marked as per manufacturing instructions, complete all as specified.
M&L 75mm bore cast iron pipes and fittings joints or connections are filled/ sealed properly by epoxy sealant of ISI marked apply as per manufacturing instructions, complete all as specified.
S&F for 100mm bore pipes stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall etc; complete all as specified.
S&F for 75mm bore pipes stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall etc; complete all as specified.
Taking down cement plaster, any description, on brick or stone walls etc, including raking out joints, hacking for key, scrubbing down with water etc and disposal of debris complete all as specified and as directed
M&L for rendering 15 mm thick in CM 1:6 over stone masonary, concrete surfaces, finished even and smooth (without using extra cement), all as specified and as directed.
M&L for 15 mm thick rendering on stone masonary wall surfaces in CM 1:4 finished fair and even all as specified and as directed.
M&L for 10mm thick rendering in CM 1:3 on ceiling surfaces finished surfaces even and smooth without using extra cement complete all as specified and as directed.
M&L for dubbing out average 20mm thick in cement plaster 1:4 on uneven/ irregular surface such as walls / ceilling / chajjas etc. complete all as specified.
Preparing new plastered surfaces and M&L for applying chalk whitening/ concrete primer and /or cement base putty as required incl preparing the surfaces smooth by rubbing and / or sandpapering and M&L two coats of Distemper oil Emulsion on new plastered surfaces complete all as specified and as directed.
Preparing new plastered surfaces and M&L for applying concrete primer and /or cement base putty as required incl preparing the surfaces smooth by rubbing and / or sandpapering and M&L two coats of cement base paint on new plastered surfaces complete all as specified and as directed.
Preparation of new plastered surfaces of walls etc. & applying three coats of lime white wash on walls complete all as specified and as directed.
Preparation of new plastered surfaces of ceiling etc. & applying three coats of lime white wash on ceiling complete all as specified and as directed.
Attending of complaints for checking of existing electrical items/points for serviceability for continuous of electric supply, rectifying the no light complaints including carrying out repairs/replacement etc as required to make the item/circuit functional and replacement of small pieces of wire, screw, refixing of hanging wires and electrical boards with accessories etc all as specified and directed. NOTE:- (i) Any other replacement of major items shall be measured & paid seperately under respective items of this schedule. (ii) Repairing of 4 points without any material (may be at different locations) will be considered as one unit and for more than 4 points at a time will be considered as two units.(iii) Each complaint slip restricted to maximum 10 nos of complaint for each area and for complaint above 10 nos complain for each area will be given separate complaint slip.(iv) Necessary item required for note to complaint at complaint cell i.e complaint register and complaint slip will be provided by contractor without any extra cost as per format given and as direction given by JE E/M and Engr-in-Charge. (v) contractor will insure all compaint should be rectify on same working day. vi- The contractor has provided min 05 nos electrcian with helper in Genral shift 09:00 AM to 17:00 PM to operate all complaints with proper staisfactory rectification on daily basis.
Supply and fix Switch Piano type one way 5amp ISI Marked
Supply and fix Switch Piano type Two way 5 amp ISI Marked
Supply and fix Switch bell push 5 Amps, flush button type, SP, one way
Supply and fix socket out let Piano type multipurpose 3 pin 5 Amps
Supply and fix socket outlet Piano type , 15 amps, flush type, multipurpose
Supply and fix Switch Piano type one way 15 amp ISI Marked
Supply and fix Switch socket combination 15 Amp flush type universal
Supply and fix Switch socket combination, 5 A flush type
Supply and fix Ceiling rose surface bakelite 65 x 50 mm three terminals
Supply and fixing in repair Lamp Holder, PVC FRLS/polycarbonate type with back plate suitable for batten fittings.
Supply and fix Electronic fan regulator 230 volts , step type,hum free 120 watt
Supply and fix Bell Multi Music type elecritic, 230volts.
Supply and fix Capacitor 2.5/3.15/4.0 mfd
Supply and fix Modular switch 6 Amp 250 V AC one way one module
Supply and fix Modular bell push 6 Amp 250 V AC one way one module
Supply and fix Modular switch 16 Amp 250 V AC one way one module
Supply and fix Modular switch 2 way 6A, 250 V AC 1 module
Supply and fix Modular Socket, 6A - 2/3 pin combined 2 module
Supply and fix Modular Socket 6A/16A - 2/3 pin combined 2 module
Supply and fix Modular Fan step regulator, 120W - 2 module
Taking down unserviceable ceiling fan/exhaust fan from its position and handing over to occupant for further disposal.
Hanging only repaired/new ceiling fan/exhaust fan any make and size held by occupant
Supply and fix wire mesh jali of size 350 mm with wooden frame for exhaust fan hole complete all as directed
Supply and fix PVC rectangular block for mounting, switches, sockets, fan regulator etc. with 3 mm thick plastic laminated sheet cover of size 100 mm x 100 mm and 50 mm deep
All as per item No. 201.00, but for 175 x 100 x 50 mm deep
All as per item No. 201.00, but for 200 x 150 x 50 mm deep
All as per item No. 201.00,but for 250 x 200 x 50 mm deep
Supply and fix Modular cover plate with frame 6 module.
Supply and fix Modular cover plate with frame 4 module.
Supply and fix Modular cover plate with frame 3 module.
Supply and fix Modular cover plate with frame 2 module.
Supply and fix Modular cover plate with frame 1 module.
Supply and fix Modular metal flash box 6 module.
Supply and fix Modular metal flash box 4 module.
Supply and fix Modular metal flash box 3 module.
Supply and fix MCB TPN,63 Amps .415 V in `C’ series having current rating 10 KA complete all as specified and directed.
Supply and fix MCB single pole, 6 - 32 Amps 240V in `C’ series having current rating 10 KA complete all as specified and directed.
All as per item No. 214.00, but for MCB SPN 40 to 63 Amp 240 V
All as per item No. 214.00, but for MCB SPN 32 Amp 240 V
Supply and fix Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amp complete all as specified and directed.
Supply and fix in replacement of LED Tube light1 X 20 watt (04 feet), decorative ultra slim type, with inegral driver, complete with all accessories and making necessary electric connection from ceiling rose to fitting terminal, complete all as specified and directed.
Supply and fix in replacement of LED Tube light1 X 10 watt (02 feet), decorative ultra slim type, with inegral driver, complete with all accessories and making necessary electric connection from ceiling rose to fitting terminal, complete all as specified and directed
Supply and fix in replacement of LED Tube light Linear & compact 9W mirror light with decorative grey end caps, polycarbonate body and ribbed opal diffuser complete all sepcified and directed.
Supply and fix in replacement of LED 15 watt Environmental friendly, ultra modern, energy saving, surface mounted, decorative bulk head LED luminaire comprising of high brightness LEDs, IP54 protection complete all sepcified and directed.
Supply and fix in replacement of LED Decorative wall light fixture made up of Polycarbonate, suitable for LED Bulb 09/12W(B-22 base) complete all sepcified and directed.
Taking down old wiring circuit/submain wiring and supply abd fixing for concealed/conduit or as per existing sub main wiring with 2 single core 4 Sqmm copper conductor (Multistandered) in PVC FRLS conduit of suitable size as required, including 4.0 Sqmm copper conductor as earth continuity all as directed.
All as per item No. 223.00 here-in-above, but for 2x6.0 sq. mm + 1x6.0 sq. mm earth wire
All as per item No. 223.00 here-in-above, but for 2x10.0 sq. mm + 1x10.0 sq. mm earth wire
All as per item No. 223.00 here-in-above, but for 4x10.0 sq. mm + 1x10.0 sq. mm earth wire
All as per item No. 223.00 here-in-above, but for 2x1.5 sq. mm + 1x1.5 sq. mm earth wire
Supply and fix PVC insulated twin core flexible 23/0.0076 cable wireunsheathed copper conductor stranded cable wire 1100 V grade ISI Marked
Material and labour for point wiring complete with 1.5 sq mm single core multi stranded copper conductor PVC FRLS insulated unsheathed 1100 Volt grade cable in and incl PVC FRLS casing capping PIPE (ISI Marked) with all accessories including new pressed steel terminal boxes (sunk in wall ) with 3.00 mm thick plastic laminated sheet top cover or PVC FRLS board including PVC FRLS top cover with 1.50 sq mm insulated unsheathed PVC FRLS multistranded covered copper conductor for common earth and connecting to earth dolly and making good disturbed surface of wall incl matching the colour of wall/ceiling with extisting wall/ceiling colour, suitable for One light/ceiling fan/ex fan/ bell point controlled by one switch one way all as specified and directed for
All as per item No. 229.00 here-in-above, but for One socket out let 5 Amps 5 Pin on same board with other switch
All as per item No. 229.00 here-in-above, but for One socket out let 5 Amps 5 pin on independent board
All as per item No. 229.00 here-in-above, but with single core multistranded cable of size 2.5 Sqmm for one 15 Amps socket outlet on independent board and multistanded insulated copper earth continuity conductor of size 2.5 Sq mm all as specified and directed
M/S gayatri construction company
Diva Infra
mahalaxmi enterprises
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .