REPAIRS TO PATH, HARDSTANDING, CHAIN LINK FENCING, BARBED WIRE FENCING, BOUNDARY WALL, AREA DRAINAGE, CULVERTS, KERB STONES AND PLINTH PROTECTION UNDER AGE B/R -II AREA AT GE (N) AHMEDNAGAR

Amount

Demolition of unreinforced cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) including removing rubbish off the premises complete all as specified and as directed.

Demolition of stone slabs and tiles of any description or thickness in floors, approns etc, laid, bedded and pointed in any mortar complete all as specified and directed.

M&L for providing 75mm thick PCC 1:4:8 type D2 using 40mm graded stone aggregate as in sub base ccomplete all as specified and directed.

M&L for chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigment to match in floors over and including screed bed 15mm thick in cement mortar (1:6) complete all as specified and directed.

M&L for heavy duty coloured parking tiles of size 300mm x 300mm x 10mm, set, jointed and pointed in neat cement slurry using grey cement with matching pigment, laid in floors over and including 15mm thick screed bed in cement mortar (1:6), complete all as specified and directed. Note: Colour of tiles shall be approved by GE.

M & L for 60 mm thick,factory made chamfered edge cement concrete paver block of M-35 grade with approved colour,design & pattern as in footparth, parks,lawns, drive ways or light traffic parking etc.,of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 30mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand etc, complete all as specified and directed.

M&L for 80 mm thick,factory made chamfered edge cement concrete paver block of M-35 grade with approved colour,design & pattern as in footparth, parks,lawns, drive ways or light traffic parking etc.,of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 30mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand etc, complete all as specified and directed.

M & L for 40 MM thick PCC (1:2:4) type B0 using 12.5 mm graded stone aggregate as in flooring,path etc complete all as specified and directed by Engineer-in-Charge

M&L for 30 mm thick Rough dressed(shahabad) lime stone slab flooring, laid dry but bedded and jointed in cement mortar (1:6) and pointed in cement mortar (1:3) in floor/plinth etc. complete all as specified and directed

Fixing only for 30 mm thick Rough dressed(shahabad) lime stone slab flooring, laid dry but bedded and jointed in cement mortar (1:6) and pointed in cement mortar (1:3) in floor/plinth etc complete all as specified and directed

M/L for providing 75mm thick PCC (1:3:6 )type C2 using 20mm graded stone aggregate as in plinth protection finish even and smooth without using extra cement,complete all as specified and directed

Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed

Hardcore of guage exc 63mm but n exc. 100 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface.complete all as specified and directed

Dismantling post or struct (wood,steel or RCC) any section,including taking out embedded portion and making good disturbed ground,complete all as specified and directed

Dismantling security fencing wire any type (barbed wire, chain link fencing, GI mesh etc) complete all as specified and directed.

Excavation in post holes (or similar holes) each not exceeding 0.50 cum in soft/loose soil, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering and removing surplus soil to a distance not exceeding 50 m and making good surface complete all as specified and as directed.

M & L for plain Cement concrete (1:3:6) type C-2 using 40mm graded stone aggregate as in foundation filling and mass concrete for boundary pillars and fencing posts (including caps and bases) including necessary formwork etc complete all as specified and directed by Engineer-in-Charge

Supply and Fabricate,erect and fix in position mild steel work,as in fencing post/struts including cutting tops to shape as directed, drilling holes,notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc.,and similar work conforming to Fe-290 Gde E-165. complete all as specified and as directed.

Supply only ISI Marked Chain link MS galvanised fencing mesh any size and dia conforming to IS 2721: 2003) including line wires complete all as specified and directed. (Note : Sample / Make of chain link shall be got approved from GE by contractor prior placing bulk order.)

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc.including provission of binding wire as specified and directed.

S& F 10mm dia MS bolts screw machine made with hexagonal or square head at one end and screwed the other or screwed both ends , each screwed end to be fitted with washer and one hexagonal or square nut 5cm long etc complete all as specified & directed .

M & L for preparing steel surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed.

S&F Fe-290 (Gde-E-165) Framed work as in doors or gates of angle or other section with gusset plates, rails,braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering,running rails and guides) and hanging; also fastening and fixing, complete all as specified and directed.

Demolition of brick work or stone/boulder masonry or block masonry build in cement mortar including all quions/archers etc completed all as specified and directed.

M & L for brickwork with fly ash modular brick, straight or curved on plan exc 6m mean radius, built in built in cement mortar (1:6), completed all as specified and directed.

M & L for Walling of random rubble,uncoursed,well bonded,bedded and solidly hearted,built in CM (1:6) brought upto course, completed all as specified and directed.

M & L for pre-cast cement concrete solid blocks, exc. 10 cm in width type C-5 (1:5:10) using 20 mm graded stone aggregates and setting in mortar (1:6) completed all as specified and directed..

All as per Item No.28 above, but except block, completed all as specified and directed.

Material and labour for precast cement concrete Type C0 (1:3:6) (using 12.5 mm graded stone aggregate) set in cement mortar (1:6) as in louvres and jallies, 25 mm thick (measured solid) including all moulding but excluding frame (precast frame shall be measured seperately and paid for under respective item) completed all as specified and directed.

Extra over stone walling for hammer dressing to face stones and dressing of face beds and joints,as specified, of random rubble walling, uncoursed or brought upto courses with maximum depression on face from straight edge held against the dressed surface n exc. 40 mm in Lime or sand stone. completed all as specified and directed.

Raking out cement mortar joints/pointing to random rubble uncoursed or brought up to courses etc completed all as specified and directed.

M&L for pointing to random rubble uncoursed or brought up to courses in CM (1:4) etccompleted all as specified and directed.

Taking down cement plaster on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for rendering, 10 mm thick on brick / concrete surfaces in cement mortar 1:6 surfaces finished even and fair without using extra cement, complete all as specified and directed.

M&L for rendering, 15 mm thick on stone/brick/concrete surfaces in cement mortar 1:4 finished even and fair without using extra cement complete all as specified and directed.

M&L for precast RCC columns and plates in M-20 grade concrete, including reinforcement cutting, bending, binding, fabrication, and fixing in position, complete all as specified and directed. Column: Size 150mm x 150mm with 4 Nos. of 6mm dia main bars Plate: Size 1800mm x 1500mm x 50mm with 4 Nos. of 4mm dia wires Spacing: Distance between two columns not exceeding 1.8 metres Note: Additional columns shall be provided at corners or as required at site.

M&L for U shaped precast RCC drain, type light, Internal size 300 x 300 mm and outer 440 x 370 mm, fixed over PCC with 20 mm cement slurry, complete all as specified and directed by Engineer in Charge.(Excluding reinforcement)

M&L for Precast Drain Cover for U shaped precast RCC drain, type light, Internal size 300 x 300 mm, complete all as specified and directed by Engineer in Charge.(Excluding reinforcement)

Earth work in excavation of any type of soil by mechanical means (Hydraulic excavator)/ in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. complete all as specified and directed.

Earth work in excavation of any type of soil by mechanical means (Hydraulic excavator)/ in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift exc 1.5 m and upto 3.0 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. complete all as specified and directed.

M & L for plain Cement concrete (1:4:8) type D-2 using 40mm graded stone aggregate as in foundation filling and mass concrete etc complete all as specified and directed.

M & L RCC(design Mix) M-20 (20 mm graded stone aggregate) for Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete, complete all as specified and directed

M & L RCC(design Mix) M-20 (20 mm graded stone aggregate) for Walls, retaining walls, basement walls and the like; any thickness; above top of footings; including attached pilasters and buttresses,complete all as specified and directed

M&L RCC (design Mix) M-20 (20 mm graded stone aggregate)Slabs supported on walls,beams and columns in floors,roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed

M&L MS TMT bars (Fe 500D)10 mm dia and over, cut to length, bent to shape required including cranking, bending and binding with and including annealed MS wire not less than 0.90 mm dia as required and as directed, complete all as specified and directed

M&L MS TMT bars(Fe500) 6 to 8 mm dia and over, cut to length, bent to shape required including cranking, bending and binding with and including MS wire (annealed) not less than 0.90 mm dia as in stirrups spaces, binders and nibs etc. complete all as specified and directed

Formwork to sides of concrete foundations, footings,bases of columns,raft beam plinth beam flat rough finished surfaces of concrete etc complete all as specified and directed

Formwork to faces of walls, retaining walls, abutments, parapets and staircase railing and similar work including attached pillasters, buttresses, etc.; vertical or to better complete all as specified and directed

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm, complete all as specified and directed

Removing excavated material exc. 50 m and upto 250 m depositing outside MD land and where directed at a level n exc. 1.5 m above the starting point, complete all as specified and directed

Demolition of cement Concrete (unreinforced) of any description and in any position not otherwise specifically provided for, complete all as specified and directed

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required. complete all as specified and directed

M & L for preparing of new plastered surfaces of wall and applying two coats for cement based paint over one coat of alakali resistant priming paint any height including scaffolding etc complete all as specified and as directed.

M& L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. complete all as specified and directed

M&L for preparation of old plastered surfaces of wall and applying one coat of cement base paint any height including scaffolding etc complete all as specified and directed

M&L for preparation of old plastered treated surface of wall by brooming down and applying one coat of weather proof 100 % acrylic exterior emulsion apex ultima paint of any tint as approved by GE after cleaning the surface complete all as specified and directed

M&L for preparation of old steel surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint etc complete all as specified and directed

Cleaning of sewage pipe line (RCC / SGSW) by mechanical means such as Rottary cutter etc incl removal of roots inside the pipe etc, including rodding manually or mechanically from manhole to manhole and removing the waste materials / sludge disposing to a distance n exc 50 m and burying in borrow pits and covering with mud all as directed of any diameter of pipe etc complete all as specified and directed by Engineer-in-Charge Note:- (i) Contractor shall take all Precautionery measures during cleaning of sewage line / septic tanks etc. (ii) Contractor shall provide First Aid box, shoes, hand gloves, mask & required clothing to the workers at site. (iii) It shall be the responsibility of Contractor that if any mishap happens at site, Govt shall not be liable to pay any type of compensation.

Cleaning/desludging of existing Manhole/septic tank of any capacity/sump well of any dia and depth incl taking out sludge in any form and other foreign matter etc viz sediment, sand, ash, grease, fibre, silt, roots or vegetation etc, cleaning the premises using chlorine powder etc complete all as specified and directed by Engineer-in-Charge

S&F in repair of 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls,complete all as specified and directed

S&F in repair of 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls

S&F in repair of 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and directed

S&F in repair of 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors

S&F of 110mm bore PVC (SWR) bends any radius, complete all as specified and directed

S&F of 75 mm bore PVC (SWR) bends any radiu, complete all as specified and directed

S&F of 110mm bore PVC (SWR) branch piece single (single Y) equal or unequal, complete all as specified and directed

S&F of 110 mm bore PVC (SWR) bends with access door, complete all as specified and directed

S&F of 75 mm bore PVC (SWR) bends with access door, complete all as specified and directed

AZAD SERVICES (BID ID -3447117)

M/S. ARUN LAXMAN JAGTAP (BID ID -3446804)

Avinash B Kullal (BID ID -3447306)

M/S VISHWAJEET SHANKARRAO KULKARNI (BID ID -3447243)

MUDRIK ENTERPRISES (BID ID -3447832)

M/S MAHESHWARI ENTERPRISES (BID ID -3447857)

M/s AG PATHAN (BID ID -3447872)

M/S-B.R.SONAWANE (BID ID -3443896)

M/S. M. F. Sharif & Co. (BID ID -3447862)