SPECIAL REPAIRS TO GROUND FLOOR OF ARJUN BLOCK P-33 AT INS CIRCARS, VISAKHAPATNAM.

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing rubbish off the premises complete all as specified and directed.

Demolition of un-reinforced cement concrete in ground floors and pavings not exceeding 15 cm thickness, (Below or above ground level) and removing rubbish to a distance n.exe 100 m complete all as specified and directed.

M&L for Coloured Glazed ceramic tiles in vertical surface 350 x 250 x 7 mm/ 450 x 350 x 7 mm thick (Concept pattern Tiles) set and jointed in neat cement slurry and pointed in white or Coloured cement to match including 10mm thick backing coat in CM 1:4 complete all as specified and directed.

M&L for Non-Skid Ceramic coloured tiles 7 to 8 mm thick (Square/ Rectangular) polished, light shade, area of each tile exc 0.18 Sqm but not exceeding 0.38 sqm, in floors by providing 3mm spacers and filling with epoxy grout matching color with tiles by applying masking tape etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for non-skid, ceramic, coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.18 sqm but n.exc 0.38 sqm, as in vertical surfaces as in skirting, dado etc, including 10 mm thick screed bed in cement mortor 1:4 and set & jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed.

M&L for 25 mm thick PCC 1:2:4 type B0 (Using 12.5 mm graded stone aggregate) in sub base of floorings complete all as specified and directed.

M&L for 75 mm thick, plain cement concrete 1:3:6, type C-1 (using 20mm graded stone aggregate) as in plinth protection etc, finishing cement concrete surface even and smooth without using extra cement including making joints with bitumastic filing in proportion of bitumen and sand 1:2 complete all as specified and directed.

M&L for 75 mm thick, plain cement concrete 1:3:6, type C-2 (using 40mm graded stone aggregate) as in sub base floors, and finishing the concrete surface even and fair complete all as specified and directed.

M&L for Plain Cement Concrete Tiles of size 250 X 250 mmx 22mm thick, Hydraulically pressed as in Floors, set jointed and pointed in neat cement slurry to match including screed bed or bedding layer of mortar 15 mm thick in Cement Mortar 1:4 complete all as specified and as directed.

Dismantling of stone slabs & tiles of any description or thickness laid in CM and pointed in any mortar, in floors, aprons etc., complete all as specified and directed.

M&L for granite stone slab (of any type) work (table rubbed or polished) as in floor, 18 to 20 mm thick, machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including 15 mm thick screed bed in cement mortor 1:4 & cutting, polishing complete all as specified and directed.

Taking down Chowkats or frames with shutters exceeding 1.5 Sqm each n exc 4 sqm (Without taking off shutters from the frames) complete all as specified and directed.

Taking down Chowkats or frames with shutters not exceeding 1.5 Sq. m each (Without taking off shutters from the frames) complete all as specified and directed.

Taking down shutters exc 1 sqm and n exc 2 sqm each complete all as specified and directed.

S&F Powder coated (minimum 50 micron) Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed. (Note : (i) Thickness of aluminium section shall not be less than 1.5 mm).

S&F Powder coated (minimum 50 micron) Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. and anodised aluminium fittings such as peg stay 150mm long (01 No), hinge type B-21, 100mm long (02 Nos) and suitable size of handle complete all as specified and directed.

S&F Powder coated Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineerin-charge complete all as specified and directed.

S&F 4.0 mm thick sheet glass, ordinary quality and glazing with rubber beading in square exc 0.5 sq. m in each pane complete all as specifed and directed.

S&F 4.0 mm thick sheet glass, ordinary quality and glazing with rubber beading in square not exc 0.5 sq. m in each pane complete all as specifed and directed..

S&F 5.5 mm thick tinted/figured sheet glass,glazing with oil putty and glazing clips in metal/ wooden frame with second class hard wood beading/ aluminum beading in frames in squares exceeding 0.5 Sqm in each pane complete all as specified and directed.

S&F 12 mm thick, Prelaminated particle board, exterior grade, prelaminated both side with decorative choice lamination fixed with screws to timber/metal frame work complete all as specified and directed.

S&F first class hard wood plain, solid, straight Chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

M&L for preparing surfaces of wood and wood based materials, steel and iron work, new or old, of any description and girth, not otherwise described, and treated with tar or coal tar black paint complete all as specified and directed.

S&F mild steel bands, straps, supports or stays of rain water, ventilating pipes including bolts, hooks (stay) for large gates, hook and pintel hinges, clamps, hold fasts, wall ties, flat iron fillets for securing wire mesh, wind tie, fan hook and similar work including necessary drilling bolting or riveting etc conforming to Fe – 290 Gde E – 165 complete all as specified and as directed.

S&F 40 mm thick factory made ,Plain, framed panelled shutters of second class hardwood (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and directed.

S&F 35 mm thick, factory made, glazed/skeleton window shutters with second class hard wood, open rebated and prepared to receive glass, gauze, etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing glass, etc complete as specified and directed . Sizes of members of shutters as specified in SSR Part I, clause 8.24 (b) complete all as specified and directed

S&F40 mm thick, factory made, glazed/skeleton window shutters with second class hard wood, open rebated and prepared to receive glass, gauze, etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing glass, etc complete as specified and directed . Sizes of members of shutters as specified in SSR Part I, clause 8.24 (b) complete all as specified and directed

M&L for Preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint (1st grade quality) over a coat of pink primer complete all as specified and directed.

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed. .

S&F in repairs stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F auminium alloy anodised sliding door bolt with hasp & staple (bolt type) and fixing clipes of sheet, cast or extruded sections and fixing bolts of extruded sections or cast aluminium alloy, length of bolt of 300 mm complete all as specified and directed.

S&F 200 mm long aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed

S&F 200 mm long extruded aluminium alloy handles, fabricated type, anodised Complete all as specified and directed.

S&F 125mm Butt hinges, medium weight, cold rolled mild steel fixed complete all as specified and directed.

S&F 150 mm long floor door stopper aluminium alloy body including rubber tip , nickle plated to give a stainless steel finish , fixed with door to do up and down action to giving the rubber tip a good grip on the floor complete all as specified and directed.

S&F door clooser aluminium body hydraulically regulated , designation No.2 , universal type , suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, complete as per specification and drawing and as directed.

S&F factory made solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed

S&F 125 mm long extruded aluminium alloy anodised Butt hinges with galvanized mild steel hinge pin type B 22 complete all as specified and directed by Engr-in-Charge.

S&F 150 mm long aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed

S&F 150 mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

Supply, materials and application of two component structural grade polymer modified reinstatement mortar 20 mm thick of minimium compressive strength 12N/mm2 in 1 day and 45N/mm2 in 28 days. Minimum flexural strength should be 8 N/mm2 in 28 days. Single component acrylic polymer emulsion to be applied @ 6-8 sqm/lit before the application of modified polymer mortar .The morter shall be applied in layers n.exc 10mm thick in layers and including surface preparation ( maximum coverage area 1.3 sqm at 10 mm thikness per 25.25 kg bag ) Note:- This item shall be execution where shuttering is not possible or small patch repairs of structural elements . Make: (a) Acrylic polymer emulsion primer : Nitobond AR of FOSROC or equivalents solutions SIKA/STP/HINDCON as approved by GE. (b) Polymer modified reinstatement mortar:- Renderoc S2 of FOSROC or equivalents solutions SIKA/STP/HINDCON as approved by GE.

Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc., including removal of rubbish off the premises, where directed and leaving the work clear of any plastering.

M&L for rendering 15 mm thick in two coats (10mm+5mm each) on other than fair faces of brick work or concrete surfaces in cement mortar 1:4, mixed with integral water proofing compound with weight of cement in top layer as per manufacturer's instructions and finished the surface even and fair without using extra cement complete all as specified and directed. (Note : WPC shall be measured and paid separately against respective item).

Supply only integral water proofing compound [ISI marked] of approved make.

M&L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished the surfaces even and fair without using extra cement complete all as specified and directed.

M&L for rendering 5mm thick in CM 1:3 on any faces of concrete surfaces finished fair and even without using extra cement in ceiling/ chajja complete all as specified and as directed.

M&L for preparation of new platered surface of wall and applying two coats of weather proof 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre, dart pick up resistant,silicon enhanced,UV resistant and PU enhanced property over a coat of alkali resistant primer including applying one or more coat of wall care putty to a smooth surface including making good any undulations on the surfaces including all necessary scaffolding,complete all as specified and directed. Note :- Painting work shall be carried out acoording to Smart Painting procedure mentioned in PS

M&L for preparation of new platered surface of wall and applying two coats of oil bound distemper over a coat of primer including applying one or more coat of wall care putty to a smooth surface including making good any undulations on the surfaces complete all as specified and as directed. Note :- Painting work shall be carried out acoording to Smart Painting procedure mentioned in PS

M&L for preparation of new ceiling surfaces and applying two coats of distemper oil emulsion over a coat alkali resistant primer over a coat of of wall care putty complete all as specified and directed.

Demolition of reinforced cement concrete in any position not otherwise specifically provided for and removing rubbish to a distance n.exe 100 m complete all as specified and directed.

M&L for cement concrete (1:2:4), type B1 (using 20mm graded stone aggregate) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, including necessary formwork complete all as specified and as directed.

S&F for mild steel TMT bars 6 mm to 8 mm dia., cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and directed.

S&F in repair 15 mm bore, CP Hand Shower (Health Faucet) with 8mm Dia, 1.2 Meter Long Flexible Tube & Wall Hook with all accessories complete all as specified and directed.

S&F in repairs, 15mm bore, bib taps, 2 way, fancy type cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repairs, Toilet paper holder with cover, brass, chromium plated fixed to wall with brass screw complete all as specified and directed

S&F in repair 15 mm bore, Pillar Cock with 150mm Extension Body, fancy type, cast copper alloy, chromium plated, high pressure with all fittings, screwed for iron pipe complete all as specified and directed.

S&F in repair 15 mm bore, angular stop cock with wall flange, cast copper alloy, chromium plated, fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as per manufacturer's instructions and as required at site.

S&F in repairs, 15mm bore, bib taps, fancy type cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repair vitreous China wash down water closed pan (pedestal Pattern) of size 350x480x395 mm,white coloured with wall hung cistern,drainage L Bend Pipe, Gasket and Installation Kit with PP normal close seat cover, hinges, fixing accessories and accessories set, S trap, fixing bolts, including making good to floor to match with adjoining surfaces complete all as directed Make: Jaquar Cat No. CNS-WHT-551SNPP184LZ or equivelant model of make as per list of manufacturer mentioned in PS.

S&F in repair vitreous China wash hand basin table top thin rim white coloured, rectangular shape, of size : 495x395x150 mm including cutting for and pinning in ends of brackets or making suitable size of hole for pillar tap in RCC slab and granite hole complete all as specified and directed Make: Jaquar Cat No.JDS- WHT-25909 or equivelant model of make as per list of manufacturer mentioned in PS.

S&F in repairs full height urinal partition with 8 mm thick frosted glass ,chrome finish ,size - 1950mm(H)x 600 mm(W) complete all as specified and directed.

S&F in repair PVC waste pipe of bore 32 mm and 800mm long to WHB all as specified complete all as specified and directed.

S&F in repair PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed.

S&F PVC (SWR) Floor trap of 75 mm dia., outlet with grating including jointing with solvent cement complete all as specified and directed.

S&F in repair CP wall Mixer 3-in-1 System ,quarter turn with provision for both hand shower and overhead shower Complete with 115mm Long Bend Pipe, Connecting Legs and Wall Flange with and including CP Hand Hand shower in size 100 x 55 mm (4” x 2”) with 130 mm (5”) long arm with wall hook , hose and Overhead rain shower square 150 x 150 mm (6” x 6”) with shower arm 200 mm (8”) , wall flange complete all as specified and directed.

S&F in repair 20 mm dia ,3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc complete all as specified and directed.

S&F in repair 32 mm dia, 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc complete all as specified and directed.

S&F in repairs Gun Metal Globe or Gate Valve of Class - I, Pressure Tested of 1.5 MPa, 20 mm bore with iron wheel head, screwed both ends for iron pipe, ISI Marked complete all specified.

S&F in repairs Gun Metal Globe or Gate Valve of Class - I, Pressure Tested of 1.5 MPa, 32 mm bore with iron wheel head, screwed both ends for iron pipe, ISI Marked complete all specified.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc.complete all as directed

S&F 110 mm bore, PVC (SWR), Soil waste and vent pipes pressure rating 6kg/sqcm in any length with or without ears, joints with solvent cement ,fixed to wall, etc with all necessary fixing arrangement complete all as specified and directed.

S&F 110 mm bore, PVC (SWR), Soil waste and vent pipes pressure rating 6kg/sqcm in any length with or without ears, with solvent cement joints laid in trenches or in floor etc complete all as specified and directed.

S&F 75 mm bore, PVC (SWR), Soil waste and vent pipes pressure rating 6kg/sqcm in any length with or without ears, with solvent cement joints laid in trenches or in floor etc complete all as specified and directed.

S&F 110 mm bore PVC (SWR) bends of any radius ,pressure rating 6kg/sqcm complete all as specified and directed.

S&F 110 mm bore PVC (SWR) bends of any radius with access door pressure rating 6kg/sqcm complete all as specified and directed.

S&F 110 mm bore PVC (SWR) junction single (Single `T') equal or unequal with access doors complete all as specified and directed.

S&F 75 mm bore PVC (SWR) bends of any radius ,pressure rating 6kg/sqcm complete all as specified and directed.

S&F 75 mm bore PVC (SWR) junction single (Single `T') equal or unequal complete all as specified and directed.

S&F 110 mm bore, PVC (SWR) vent cowl pressure rating 6kg/sqcm complete all as specified and directed.

M&L for PVC (SWR) gully trap of 125/110 mm dia., outlet with grating including jointing with solvent cement complete all as specified and directed.

M&L for Providing and injecting chemical emulsion for post construction Anti Termite Treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) at the rate of 0.50 litres per hole by drilling 6 mm dia., holes at a down ward angle of 45 degree at 150 mm centre to centre and sealing the same to match with the existing finish complete all as specified and directed.

M&L for Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete all as specified and directed.

M&L for Treatment Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified and directed.

S&F 2000 litres capacity rotational moulded polyethylene water storage tanks, double layer construction, ISI marked (Cylindrical vertical with closed top), hoisted and fixed in position as specified in SSR Part I including disconnecting existing/old one complete all as specified and directed.

S&F in repairs 20 mm dia PTMT ball Valves, high pressure, with polythene float and fly nut , screwed for Iron pipe or brass ferrule complete all as specified and directed.

Demolition of brick work or stone boulder masonry, laid in cement mortar in any position complete all as directed.

M&L Brick work with with fly ash bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed by Engr-in-Charge.

M&L Brick work with fly ash bricks, bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:4 complete all as specified and directed by Engr-in-Charge.

M&L for preparation of old decorated surface by complete removal of existing treatment, washing, rubbing, stopping etc and applying two coats of oil bound washable distemper over a coat of primer including applying one or more coat of wall care putty to a smooth surface including making good any undulations on the surfaces complete all as specified and as directed. Note :- (i) Painting work shall be carried out acoording to Smart Painting procedure mentioned in PS (ii) Sanding of surfaces shall be done by mechanical sander with 1500-2700 rpm with internal dust extraction system for clean environment certified by the Paint manufacturer)

M&L for preparing old exterior emulsion painted surfaces of walls by washing, rubbing down stopping of painted surfaces and applying one coat of weather proof 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre, having dart pick up resistant, silicon enhanced, UV resistant and PU enhanced property including necessary scaffolding, complete all as specified and as directed. Note :- (i) Painting work shall be carried out according to Smart Painting procedure mentioned in PS

M&L for preparation of old decorated previously treated surfaces of ceiling by brooming down scrapping down smoke and efflorescent etc. complete and applying one coat of white wash complete all as specified and directed.

M&L for preparation of old decorated previously treated surfaces of wall by brooming down scrapping down smoke and efflorescent etc. complete and applying one coat of white wash complete all as specified and directed.

M&L for preparation of old wooden surfaces over 10 CM width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed.

M&L for preparation old steel surfaces over 10 CM width or girth and applying one coat of synthetic enamel paint, surfaces complete all as specified and directed.

M & L for brushing neat cement slurry with 3.00 Kg of cement per Sqm complete all as specified and as directed

Material & labour for 25 mm thick cement concrete (1:2:4) type B-0 using 12.5 mm gaded stone aggregate laid on RCC roof slab to make surface levelled for proper slope finish the surface even and fair complete all as specified and as directed.

M & L for 10 mm thick, screed bed as in roof in cement mortar 1:3 finishing the surfaces even and smooth without using extra cement mixed with water proofing compound as per manufacturer's instructions complete all as specified and directed. (Note: WPC shall be measured and paid seperately)

Material and labour for preparation of horizontal or vertical surfaces for water proofing treatment on existing cleaned non accessible RCC roof with the following specification and manufacturings instruction complete all as specified and as directed:- (a) Preparing and cleaning of fully dry surfaces as per IS3067-1966 (b) Applying bitumen primer(85/25 grade)conforming to IS:3384-1968 over the cleaned plaster surface @ 0.5 Ltr per sqm by the same membrane manufacturer of density at 25°C, 0.87 to 0.89 kg / Liter and viscosity 70-160 cps shall be applied on the prepared surface. (c) Applying a layer of APP based polymeric membrance 3.0mm thick (minimum) weight 3.6Kg per sqm (reinforced) with polyster Non woven fabric weighing not less than 160gms per sqm by torch application. The over laps shall be minimum 100mm on the transverse direction and 75 mm on longitudinal direction. (d) Applying one coat of aluminium paint @0.10 ltr per sqm over APP based polymeric membrane.

Dismantling boarding, any description including frame work, fixed in any position fixed with screws

S & F aluminium Anodised snap grid frame work of size 600mm x 600mm frame work for ceiling with aluminium tee section of size 23.5mm x 26.4mm x 1.4mm thick and aluminium angle section of size 36.5mm x 25mm x 1.4mm thick, for false ceiling including Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia, 40mm long complete all as specified and directed by the Engr-in-Charge.

S&F 4mm thick Asbestos cement plain building boards , fixed to timber/ aluminium framework with screws all as specified and directed

Dismantling wrought iron or mild steel work of any description not otherwise provided for all as specified and directed.

S&F mild steel Framed work as in doors or gates of angle or other section with gusset plates, rails,braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete conforming to Fe-410 Gde-E-250 Quality -A complete all as specified and directed.

S&F in repair sinks with drainage board made of stainless steel 1.00 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm including 50 mm Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed

Demolition and breaking 150 mm bore drain pipes (SGSW/AC/RCC) set in cement mortar including cement concrete bedding and removal of debris/rubbles etc to a distance n.exe 100 m complete all as specified and directed. (Note: Necessary excavation and earth work shall be measured and paid seperately)

M&L for excavating in trenches in soft/loose soil, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n. exc 10 sq m on plan and n exc 1.5 m in depth and getting out complete all as specified

Demolition of un-reinforced cement Concrete of any description and in any position not otherwise specifically provided for and removing rubbish to a distance n.exe 100 m complete all as specified and directed.

M & L for Plain cement concrete 1:3:6, type C-2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete, etc complete all as specified and directed.

M&L for Brick work with fly ash Bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:4 Complete all as Specified and directed

M & L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finished the surfaces even and smooth without using extra cement complete all as specified and directed.

Demolition of reinforced cement concrete in ground floors and pavings not exceeding 15 cm thickness, (Below or above ground level) disposal of unserviceable materials, debris and rubbish to a distance not exceeding 100 M as directed by the Engineer in Charge.

M & L for Precast Reinforced Cement Concrete 1:2:4, type B-1 (using 20 mm graded stone aggregate) as in cover slab (For manhole etc), chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces and set in cement mortar 1:4 including necessary form, moulds, etc complete all as specified and directed by the Engr-in-Charge. (Note : Reinforcement shall be measured and paid separately)

Removing excavated soils to a distance exceeding 1.5 KM but not exceeding 5 KM and depositing where directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm as in soft/loose soil complete all as specified and directed.

M & L Reinforced concrete pipes, class NP2, 200 mm bore, laid and jointed with collars complete all as specified and as directed.

M & L for Plain cement concrete 1:3:6, type C-2 (using 40 mm graded stone aggragate) as in concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 200 mm bore RCC drain pipes complete all as specified and directed

M & L for Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 round section) in cement concrete 1:2:4 type B1, smooth finished and reforming benching as required for 150 mm bore of pipe complete all as specifieed and directed.

Taking down point wiring copper/ aluminium (light, fans, socket or power complete fitting such as switches, ceiling rosés pendants, regulators, sockets etc to be measure separately) removing materials from site and making goods the disturb surface of walls/ ceilings/floors etc

Taking down unserviceable main switches, DBs, bus bars chambers any capacityincluding all fittings and fixtures such as MCBs, isolator, etc and removing from site complete all as specified and directed.

Taking down old / perished sub main wiring of any size aluminum condutor cable along with TW batten/ PVC conduit and making good the disturbed surface of wall all as directed.

M & L for conceled Point wiring with two runs of single core 1.5 Sq.mm. (Nominal area) PVC insulated unsheathed multistranded copper conductor cable FRLSH (ISI marked) drawn through and including non metallic PVC conduit 20 mm bore (Minimum) medium grade (ISI marked) concealed type including metal GI boxes of suitable module including modular white cover plate of suitable module for fixing modular type switches, sockets, regulators etc. including provision of multistranded 1.5 Sq.mm copper conductor cable FRLSH [ISI marked] as earth wire connected to common earth dolly and earth in distribution board complete all as specified and as directed, for one light/exhaust fan/fan point/call bell controlled by one way switch. (Note.: (i) The rate quoted is deemed to include making good the disturbed sufaces and to match the adjoining surface. (ii) The quoted rate is deemed to include cutting chases for concealed wiring including making good the same as per the existing one)

All as item no 124 but for 5 Amp socket outlet point on independent board

All as item no 124 but for 5 Amp socket outlet point on same board

All as per item Sl No 124 here in with but with 2.5 Sqmm FRLSH copper cable for one 15 Amps power point.Including 2.5 Sq mm FRLSH copper conductor cable for earth continuity conductor and connecting it to earth all as specified.

All as per item Sl No 124 here in with but with 4.0 Sqmm FRLS copper cable for one geyser point including 4.0 Sq mm FRLS copper conductor cable for earth continuity conductor and connecting it to earth all as specified.

S & F switch modular single pole one way 6 amp 240 volts,1 Module complete all as specified and as directed.

S & F Modular socket outlet 6A, 2/3 pin combined, 2 module, AC 230V, 50HZ complete all as specified and as directed.

S & F switch modular single pole one way 16 amp 240 volts, 1 Module complete all as specified and as directed.

S & F Modular socket outlet 6A/16A, 2/3 pin combined, 2 module, AC 230V, 50HZ complete all as specified and as directed.

S & F ceiling rose, 65 X 50mm two to three terminals, PVC/polycarbonate, insolated body complete all as specified and directed.

S&F modular stepped type electronic fan regulator flush type , 120W ,2 module complete all as specified and directed.

S&F SP&N enclosure with 2 pole and Earth Metal Plug & Socket with 20 Amps MCB SP cpmplete all as specified and directed

Supply and fixing LED lights fitting 1x 20W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with two core flexible,copper conductor cable of suitable size from ceiling rose complete,including taking down existing tube light fitting of any type and making good to the disturbed surface to match with existing complete all as specified and as directed

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with two core flexible copper conductor cable of suitable size complete,including taking down existing tube light fitting of any type and making good to the disturbed surface to match with existing complete all as specified and as directed

S & F in repairs LED light fittings, ceiling mounted, panel type, white powder coated CRCA body, PC lens, Approx dimensions 2'x2', 36 Watt, Lumen ≥ 3600, Luminous afficacy ≥ 100 Lum/Watt, IP 40 rated,PF ≥0.9, over voltage protection withstand upto 360 (for 10 Minutes), 4KV surge Protection with open and short circuit protections as per IS: 10322 with all accessories, internally prewired and connecting up with twin core twisted copper conductor cable of suitable size including lamp complete all as specified and directed.

Supply and fixing LED street light fitting 35 Watt 230V AC outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in triple optics complete with IP 66 protection with and including 1.5 sqmm weather proof 3 core FRLH grade copper conductor and 32 mm dia( or higher size as per manufacturers recommendation) light grade GI pipe (bend to shape or as per manufacturers recommendation ) bracket 1.5 mtr long complete with MS flat iron clamp (clamps shall be 40 x 5 mm MS flat) nuts, bolts & washers including painting the clamps with two coat of aluminium paint over a coat of red oxide primer and including taking up old light fitting complete all as specified and as directedcomplete all as specified and directed

S & F Distribution Board, TPN 6Way with 200 amps rated bus bar, 415V, Double door with IP 43 protection, IK 09 complete all as specified and as directed.

S & F sheetmetal TPN MCB encloser with and including one TPN MCB of capacity 32 Amps 415 Volt complete all as specified and as directed.

S & F Distribution Board, SPN 8 Way, 240V, Double door with IP 43 protection IK 09 complete all as specified and as directed.

Supply, fixing, commissioning and testing MCB TPN 40 Amps, 415 Volts, 10KA, C curve complete all as specified and as directed

Supply, fixing, commissioning and testing MCB TP 40 Amps, 415 Volts, 10KA, C curve complete all as specified and as directed

Supply, fixing, commissioning and testing MCB SPN 40-63 Amps, 240 Volts, 10KA, C Curve complete all as specified and as directed

Supply, fixing, commissioning and testing in repair MCB SP 6-32A Amps, 240 Volts, 10KA, C Curve complete all as specified and as directed

S & F MCCB 415 Volt, 16 KA, 4 Pole, 100 Amps Capacity with fixed thermal magnetic protection unit complete all as specified and as directed.

M & L for Sub main wiring with 2 runs of Single core 2.5 sqmm [ for Phase & Neutral ] PVC insulated multi stranded FRLSH (ISI marked) copper cable drawn through and including surface PVC conduit of suitable size with all conduit accesories and fittings along with 1 run of single core 2.5 sqmm PVC insulated multi stranded FRLSH (ISI marked) copper cable as earth continuity conductor complete all as specified and as directed. (Note :- Two runs of 2.5 sqmm and one runs of 2.5 sqmm cable as earth wire and one run of conduit shall be measured as one length)

M & L for Sub main wiring with 2 runs of Single core 6 sqmm [ for Phase & Neutral ] PVC insulated multi stranded FRLSH (ISI marked) copper cable drawn through and including concealed PVC conduit of suitable size (medium grade) with all conduit accesories and fittings along with 1 run of single core 6 sqmm PVC insulated multi stranded FRLSH (ISI marked) copper cable as earth continuity conductor complete all as specified and as directed. (Note :- (i) Two runs of 6 sqmm and one runs of 6 sqmm cable as earth wire and one run of conduit shall be measured as one length, (ii) The quoted rate is deemed to include cutting chases for concealed wiring including making good the same as per the existing one)

M & L for Sub main wiring with 4 runs of Single core 6 sqmm [ for Phase & Neutral ] PVC insulated multi stranded FRLSH (ISI marked) copper cable drawn through and including concealed PVC conduit of suitable size (medium grade) with all conduit accesories and fittings along with 1 run of single core 6 sqmm PVC insulated multi stranded FRLSH (ISI marked) copper cable as earth continuity conductor complete all as specified and as directed. (Note :- (i) Four runs of 6 sqmm and one runs of 6 sqmm cable as earth wire and one run of conduit shall be measured as one length, (ii) The quoted rate is deemed to include cutting chases for concealed wiring including making good the same as per the existing one)

M & L Earthing complete with GI earth plate electrode 600 mm x 600mm x 6 mm thick burried directly in ground vertically to a depth not less than 2.25 m below ground level with the top edge of earth plate at depth not less than 1.5 m below ground level connected with galvanised earth lead of 4.00mm dia by means of bolts, nuts, check nuts and washers protected by 15mm bore light grade GI pipe, funnel with 20mm bore GI medium grade pipe for watering, wire mesh, including concrete pit in PCC (1:3:6) type C-1, with 40 mm thick Pre-cast R.C.C. (1:2:4) type B-I cover slab (reinforced with 8 mm dia deformed bar @ 10 cm C/C both ways and suitable handle of 12 mm dia round bar), including providing charcoal or coke and common salt in alternate layers of 15 cm compacted thickness all around the earth electrode, with funnel, wire mesh, aluminium lugs, complete in all respect all as shown in electrical plate No. 3 and other end connected with main switch board or Earthing test point as directed, including necessary earth work and disposal of spoil to a distance not exceeding 50 metre and necessary testing on completion including taking down old one complete all as specified and as directed by the Engineer-in-Charge. Note: On testing after completion if the desired earth resistance is not obtained the earthing will be redone at no extra cost

S&F in repair upvc cable trunking slotted of size 50 mmx 50 mm including cover, bends, elbows, couplers,tees, internal and external bends, arrananging existing electrical cables/ copper refrigiration pipes complete all as directed by Engr- in -charge

S&F of CPVC pipe pipe of dia 20 mm incl all tees,elbows,reducers,clamps joints etc for air conditioner drain water discharge and connecting into rain water discharge pipes/area drainage including taking down old broken one complete all as specified and directed

Taking down & dismantling the Exhaust fans from its position for cleaning, servicing, oiling and lubricating and replacement of unserviceable parts and refixing the same after painting Exhaust fans complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc. complete with all the parts i.e. frame,fan legs, fan blades etc. damaged spilt pins and screw, nuts and spring washers including ,flexible cord of 24/0.2mm with nece.ary connector as required complete all as directed. Note : The cost of new parts require for minor repair work shall deemed to be included in quoted rate

Taking down & dismantling the ceiling fan from its position and taking down for cleaning, servicing, oiling and lubricating and replacement of unserviceable parts and refixing the same after painting fans/Exhaust fans complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc. complete with all the parts i.e. down rod, canopies, fan blades etc. damaged spilt pins and screw, nuts and spring washers including ,flexible cord of 24/0.2mm with nece.ary connector as required complete all as directed. Note : The cost of new parts require for minor repair work shall deemed to be included in quoted rate

Supply and laying cable XLPE insulated screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 35 Sqmm 3.5 core, fixing along the poles or passing through pipes or laid under floor of through walls etc jointing and testing including taking out/down existing cable complete all as specified and directed.

S&F Tubes, 'light grade' galvanised,50 mm bore with all fitting and fixed to walls and ceilings or laid in floors complete all as specified and directed.

SATYAMEGHA ENGINEERS (BID ID -3289263)

G Srinivas Rao (BID ID -3286597)

MURALI KRISHNA ASSOCIATES (BID ID -3287641)

SRI SAI MANIKANTA ENTERPRISES (BID ID -3290864)

SV CONSTRUCTION (BID ID -3288174)

Eastern engineering Enterprises (BID ID -3286919)

MERIDIAN CONSTRUCTIONS PRIVATE LIMITED (BID ID -3287799)