IISER-K/IWD/Elect/19-20/09

Amount

Installation of existing kitchen hood: fixing with necessary supports,channel, elbow, gasket, tie rod in complete shape. Details are given below.

1200mm X 2100mm ceiling mounted

900mm X 1950 mm ceiling mounted

Supply of baffle type grease filter: SS304, thickness 1 mm sheet, 500 CFM capacity, adjustable frame, V type. Makes of SS: Jindal, TATA, Sail.

Size: 430x530mm

size: 340x530mm

size: 510x530mm

size: 500x530mm

Supply, installation, testing and commissioning of blower motor set: Galvanized steel blade, dynamically and statically balanced, direct driven,IP-55, Squirrel cage induction motor,3 phase,415 VAC, 50HZ Supply, 20 hrs/day with 90% efficiency, TEFC, motor body should be painted and installation with supports, vibration pad ,nut bolts ,weather proof vibration isolator etc. incomplete shape. Makes of motor: GC, Kirloskar, Marathan 2HP,2000CFM

Installation of existing axial flow fan: Capacity 2 HP,5000 CFM, hanging with supports, Channel, vibration pad , nut bolts , vibration isolator etc. incomplete shape.

Supply, installation, balancing and commissioning of fabricated at site GSS sheet metal rectangular/ round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, flanges, supports etc. as per approved drawings and specifications of 0.8 mm sheet thickness complete as required. Makes: Jindal, TATA, Sail

Supply and fixing of aluminium powder coated grill: Fixing with necessary supports in normal exhaust ducting in complete shape

Supply and fixing of Polymeric Bituminous Membrane tar felt sheet of 2mm thickness on GSS duct (only external portion) with pasting and necessary arrangement.

Supply and installation of makeup air unit: factory built, floor mounted ,double skin type horizontal make up air unit made of 25mm thick panels consisting of pre plasticized G.I. casing of thickness 0.8mm outside layer and 0.8 mm inside layer with polyurethane foam (PUF) insulation factory injected between them by injection moulding machine, complete with blower section with blower suitable for static pressure as required, minimum 2 bend GSS/PVC eliminators, filter section with 50mm thick metal viscous/ washable synthetic type air pre filters, belt driven package with TEFC drive motor of efficiency class IE3 suitable for 415 ± 10% volts, 50Hz, 3 Phase AC supply,3000 CFM, supply air damper, necessary vibration isolation arrangement, supports etc. in complete shape.Makes:Krugger,edgetech,zeco,Waves

Supply, Installation, Testing and Commissioning of electrical I/O panel for exhaust system: Incomer- 63A MCCB,4 pole,415V, 3 phase,50HZ, 25 KA, thermal magnetic type trip, R-Y-B indicator lamp, multifunction meter-1No. Outgoing-Dol starter for exhaust motor of 2HP,3 Phase, 415volt,50 Hz,2.5-4A,R-Y-B phase indicator lamp,25A TP MCB,10KA, on/off push button-6 Nos. Wall mounted panel, made of 2mm thick CRCA MS sheet, incomings and outgoing are arranged in suitable compartment, locking arrange for each compartment, PVC insulated 1.1kv grade copper conductor, aluminium bus bar, brass compression gland, earthing, powder coated painting etc. In complete shape. Makes: MCCB-Havells, LnT, ABB, Siemens Dol starter-LnT, ABB, Siemens

Supplying of 4 core cable: 6 Sqmm, aluminium,armoured, XLPE insulated cable, PVC inner sheath, 1.1KV grade. Makes: Havells,RR,Polycab

Laying of 3 core cable on wall surface: laying of 4 core cable with necessary supports,clamp etc. in complete shape.

AERIZO TECHNOLOGIES