Construction of New Boys Hostel at Government Polytechnic, Ambawadi, Ahmedabad.

Name of work :-

Construction of New Boys Hostel at Government Polytechnic, Ambawadi, Ahmedabad.

Item Quantities Item of work Estimated Estimated Rates In Words Unit Amount in Rupees

No. estimated but Rates In

may be more or Figure

1 4792.00 Excavation for foundation Upto 1.50 m depth including sorting out 117.08 Rupees One Hundred Seventeen And Paise Cum

and stacking of the useful materials and disposing off the excavated Eight Only

stuff up to 50 metre lead. (A) loose or soft soil.

2 3680.00 Excavation for foundation from depth 1.50 m to 3.00 m including 162.38 Rupees One Hundred Sixty Two And Paise Cum

Thirty Eight Only

sorting out and stacking of the useful materials and disposing off the

excavated stuff up to 50 metre lead. (B) Dence or hard soil.

3 2605.00 Excavation for foundation from depth 3.00 m to 5.00 m including 174.23 Rupees One Hundred Seventy Four And Cum

Paise Twenty Three Only

sorting out and stacking of the useful materials and disposing off the

excavated stuff up to 50 metre lead. (B) Dence or hard soil.

4 7712.00 Filling available excavated Earth (Excluding Rock) in trench 130.39 Rupees One Hundred Thirty And Paise Cum

plinthside of foundation etc. in layer not exceeding 20 cm in depth Thirty Nine Only

consolidation each deposited layer by ramming and watering etc.

5 1024.00 Filling in foundation and plinth with murrum or selected soil in 289.06 Rupees Two Hundred Eighty Nine And Cum

layers of 20 cm Thickness including watering, ramming and Paise Six Only

consolidating etc. complete.

6 2205.00 Filling in plinth with sand under floors including watering, ramming 460.19 Rupees Four Hundred Sixty And Paise Cum

consolidating and dressing etc. complete. Nineteen Only

7 2746.00 Collecting Carting and disposing of surplus earth, debris etc. with 0 to 412.49 Rupees Four Hundred Twelve And Paise Cum

5 Km lead and lift. Forty Nine Only

8 2531.00 Anti-Termite System : 105.95 Rupees One Hundred Five And Paise Sqm

Carrying out plinth treatment to post conctruction/existing structure Ninety Five Only

by spraying chemical solution for termite control treatment including

labour and materials consistment with I.S.I specification using

Chlordene and Chiorpurfiles 20 EC. As per 6131_part-II

Consentration weight one percent is recommended i.e. one litre 20 EC

chemical emulsion with 19 litre give 1% concentration inclusive of one

litre chemical emulsion application at the rate of 5 litre chemical /

Sqm of surface is recommended as per IS.

Item Quantities Item of work Estimated Estimated Rates In Words Unit Amount in Rupees

No. estimated but Rates In

may be more or Figure

9 1054.30 Providing and laying in position Ready Mixed M-150 grade concrete 4024.55 Rupees Four Thousand Twenty Four And Cum

for reinforced cement conctere work in Foundations & Plinth, using Paise Fifty Five Only

cement content as per approved Design Mix manufactured in fully

automatic batching plant at site of work in transit mixer having

continuous agitated mixer, manufactured as per mix design of

specified grade for reinforced cement concrete work including

pumping of R.M.C. from transit mixer to site of laying, excluding the

cost of reinforcement and including cost of centering. shuttering,

formwork finishing and admixtures in recommended proportions as

per IS : 9103 to accelerate/ retard setting of concrete, improve

workability without impairing strength and durability as per direction

of the Engineer -In - Charge. Without Fly Ash (Min cement level as per

latest IS 456 shall be maintained) (Cement level 290 kg )

10 379.00 Providing and laying in position Ready Mixed M-200 grade concrete 5114.74 Rupees Five Thousand One Hundred Cum

for reinforced cement conctere work in Grade Slab, using cement Fourteen And Paise Seventy Four Only

content as per approved Design Mix manufactured in fully automatic

batching plant at site of work in transit mixer having continuous

agitated mixer, manufactured as per mix design of specified grade for

reinforced cement concrete work including pumping of R.M.C. from

transit mixer to site of laying, excluding the cost of reinforcement and

including cost of centering. shuttering, formwork finishing and

admixtures in recommended proportions as per IS: 9103 to

accelerate/ retard setting of concrete, improve workability without

impairing strength and durability as per direction of the Engineer -in -

charge. Without Fly Ash (Min cement level as per latest IS 456 shall

be maintained) (Cement level 360 kg ).

Item Quantities Item of work Estimated Estimated Rates In Words Unit Amount in Rupees

No. estimated but Rates In

may be more or Figure

11 6031.00 Providing and laying in position Ready Mixed M-250 grade concrete 6413.43 Rupees Six Thousand Four Hundred Cum

using cement content as per approved Design Mix manufactured in Thirteen And Paise Forty Three Only

fully automatic batching plant established on site and transported to

site of work in transit mixer having continuous agitated mixer,

manufactured as per mix design of specified grade for reinforced

cement concrete work including pumping of R.M.C. from transit mixer

to site of laying, excluding the cost of reinforcement and including

cost of centering. shuttering, formwork finishing and admixtures in

recommended proportions as per IS : 9103 to accelerate/ retard

setting of concrete, improve workability without impairing strength

and durability as per direction of the Engineer -In - Charge. Without

Fly Ash (Min cement level as per latest IS 456 shall be maintained) for

all RCC elements like Footings , Mass concrete , Column up to GL

, Ground/Plinth Beam Plinth Slab, Columns, Beam, Chhajja,

Lintal, Slab, Stair, RCC Wall, Coping etc. For All Floor

12 2216.00 Extra for concreting in grade M350 instead of M250 including cost of 273.57 Rupees Two Hundred Seventy Three And Cum

cement, labour etc. complete. Paise Fifty Seven Only

13 158.00 Extra for concreting in grade M300 instead of M250 including cost of 182.38 Rupees One Hundred Eighty Two And Cum

cement, labour etc. complete. Paise Thirty Eight Only

14 1060.00 Providing throating or plaster drip and mouldingto R.C.C. Chajjah 1 41.66 Rupees Forty One And Paise Sixty Six Rmt

x 1 cm Groove. Only

15 710569.00 Providing IS Mark TMT FE-550D bar reinforcement for RCC work 97.99 Rupees Ninety Seven And Paise Ninety Kg

including bending & placing in position complete up to All floor Level. Nine Only

(Primary Producer Steel TATA, RINL, VIZAG, SAIL, JSW)

16 271.00 Brick work using common burnt clay conventional building bricks 4021.02 Rupees Four Thousand Twenty One And Cum

having crushing strength not less than 35 Kg/sqmt. in foundation Paise Two Only

and plinth in cement mortar 1:6 ( 1 cement : 6 fine sand ) including

curing etc. complete.

17 2363.00 Brick work using common burnt clay conventional building bricks 4416.56 Rupees Four Thousand Four Hundred Cum

having crushing strength not less than 35 Kg/sq cm. in Super Sixteen And Paise Fifty Six Only

structure for All floors in cement mortar 1:6 ( 1 cement : 6 fine sand )

including curing etc. complete.

18 1717.00 Half brick masonary in common burnt clay conventional building 671.17 Rupees Six Hundred Seventy One And Sqm

bricks having crushing strength not less than 35 Kg/Sq.cm. in C.M. Paise Seventeen Only

1:4 ( 1 cement : 4 coarse sand ) including curing etc. complete for all

Item Quantities Item of work Estimated Estimated Rates In Words Unit Amount in Rupees

No. estimated but Rates In

may be more or Figure

19 13387.00 Providing 10 mm thick Mala cement plaster in single coat on 217.63 Rupees Two Hundred Seventeen And Paise Sqm

brick/concrete wall/ceiling for interior plastering finished even and Sixty Three Only

smooth including scaffolding, curing and 1 cm x 1 cm grooves at

junction of structural members etc. complete. In Cement mortar 1:3(1

cement : 3 fine sand) for all floors.

20 23582.00 Providing 20 mm thick double coat Mala cement plaster on interior 352.65 Rupees Three Hundred Fifty Two And Sqm

brick/concrete work for plastering comprising of base coat of 12 mm Paise Sixty Five Only

thick cement plaster in Cement mortar 1 : 4 ( 1 cement : 4 coarse

sand ) in rough finishing and 8 mm thick top coat of cement mortar

: 2 ( 1 cement : 2 coarse sand ) finished with trovel including

scaffolding curing and 1 cm x 1 cm grooves at junction of structural

members etc. complete for all floors.

21 7150.00 Providing 15 mm thick Waterproof cement plaster using water 303.23 Rupees Three Hundred Three And Paise Sqm

proofing powder or materials 1Kg/1Bag of cement or in proportion Twenty Three Only

recommended by the manufacturer for all floors on brick

work/concrete work for interior plastering finished even and smooth

including curing etc. complete in C M 1:3 ( 1 cement : 3 coasrse sand)

including finishing with a flooting coat of neat cement slurry etc

22 8574.00 20 mm. thick Sand face GUTKA Cement PLASTER WITH 1 CM X 300.66 Rupees Three Hundred And Paise Sixty Sqm

1CM GROOVES AS PER PATTERN on walls above ground level Six Only

consisting of 12 mm. thick backing coat of C.M. 1:3 (1 cement :

sand) and 8 mm. thick finishing coat of C.M. 1:1 (1 cement : 1 sand)

etc. complete for total height of building.

23 9160.00 Finishing wall with weather proof exterior Acrylic emulsion paint as 133.62 Rupees One Hundred Thirty Three And Sqm

approved by Engineer in Charge on wall surface in two coats & One Paise Sixty Two Only

coat of primer of white cement material to give an required shade

after thoroughly brushing the surface to remove all dirt, and remains

of loose powdered materials etc. complete for all floor.

24 13459.00 Wall painting (tthree coats) with plastic emulsion paint of approved 158.95 Rupees One Hundred Fifty Eight And Sqm

brand and manufacture on new Cealing surface to give an even shade Paise Ninety Five Only

including two coats of lapy ( putty) & two coats of primer of approved

brand including thoroughly brushing the surface free from mortar

dropping and other foreign matter and sand papered smooth for all

25 23693.00 Wall painting (three coats) with plastic emulsion paint of approved 153.54 Rupees One Hundred Fifty Three And Sqm

brand and manufacture on new wall surface to give an even shade Paise Fifty Four Only

including two coats of lapy ( putty) & two coats of primer of approved

brand including thoroughly brushing the surface free from mortar

dropping and other foreign matter and sand papered smooth for all

Item Quantities Item of work Estimated Estimated Rates In Words Unit Amount in Rupees

No. estimated but Rates In

may be more or Figure

26 771.00 Provdg. & laying 600 x 600 mm machine cut mirror polished Blue 992.66 Rupees Nine Hundred Ninety Two And Sqm

kota stone slab flooring over 20 mm (average) th. base if cement Paise Sixty Six Only

mortar 1:6 (1 cement : 6 coarse sand) or L.M. 1:1.5 laid over and

jointed with grey cement slurry mixed with pigment to match the

shade of slab incl. Rubbing & polishing and edge moulding of sides

etc. complete. (A) 25 mm thick.

27 36.00 Provdg. & laying machine cut mirror polished Blue kota stone slab 1187.79 Rupees One Thousand One Hundred Sqm

25 mm th. In risers of steps, skirting, dedo and pillars laid on 10 Eighty Seven And Paise Seventy Nine Only

mm th. Cement mortar 1:3 (1 cement :3 coarse sand ) and jointed with

grey cement slurry mixed with pigment to match the shade of slab

incl. rubbing & polishing etc. complete.

28 4140.00 Providing and fixing 600 mm x 600mm / 24" x 24" of 8 to 10 mm 1073.13 Rupees One Thousand Seventy Three And Sqm

thick Polished vitirified tiles as approved by Engineer in charge in Paise Thirteen Only

two colour patern in light / dark shade flooring over 20 mm base of

cement mortar (1:6) ( 1 Cement : 6 corse Sand ) laid over new surface

and jointed with colour cement slury and finished with flush pointing

and cleaning the surface etc complete as directed by engineer in

29 480.00 Providing and laying 8 to 10 mm thick Polished vitirified tiles as 1141.45 Rupees One Thousand One Hundred Forty Sqm

approved by Engineer - in - charge in two colour pattern in Light / One And Paise Forty Five Only

Dark shade Skirting, Risers of Steps, Dedo on 10mm thick Cement

Plaster 1:3 (1 cement : 3 coarse sand) and jointed with colour cement

slurry and finished with flush pointing and cleaning the surface

etc.complete as directed by Engineer-in-charge.

30 2117.00 Providing and laying 600 mm x 600 mm x 8 mm thick full body 1189.88 Rupees One Thousand One Hundred Sqm

Matt finished Vitrified tile as approved by Engineer - in - Charge in Eighty Nine And Paise Eighty Eight Only

one / two colour pattern flooring over 20 mm (average) base of

cement mortar 1:6 (1 cement : 6 coarse sand) laid on new surface and

jointed with colour cement slurry including finishing with flush

pointing & cleaning the surface etc. complete.

31 152.00 Providing and laying 600 mm x 600 mm x 8 mm thick full body Matt 1141.45 Rupees One Thousand One Hundred Forty Sqm

Finished Vitrified tile as approved by Engineer - in - Charge in dedo, One And Paise Forty Five Only

skirting of ths same material of flooring colour, shade & in pattern as

per drawing including 10mm average thick base of cement mortar 1:3

(1 cement : 3 coarse sand) laid over and jointed with colour cement

Item Quantities Item of work Estimated Estimated Rates In Words Unit Amount in Rupees

No. estimated but Rates In

may be more or Figure

32 514.00 Providing and laying 600 mm x 600 mm x 8 mm thick full body 1397.83 Rupees One Thousand Three Hundred Sqm

Matt finished Antiskid Vitrified tile as approved by Engineer - in - Ninety Seven And Paise Eighty Three Only

Charge in one / two colour pattern flooring over 20 mm (average)

base of cement mortar 1:6 (1 cement : 6 coarse sand) laid on new

surface and jointed with colour cement slurry including finishing with

flush pointing & cleaning the surface etc. complete.

33 1044.00 Providing and laying 300 x 600 x 8 to 10 mm thick Polished 1697.81 Rupees One Thousand Six Hundred Sqm

vitirified tiles as approved by Engineer - in - charge in two colour Ninety Seven And Paise Eighty One Only

pattern in Light / Dark shade Skirting, Risers of Steps, Dedo on

10mm thick Cement Plaster 1:3 (1 cement : 3 coarse sand) and jointed

with colour cement slurry and finished with flush pointing and

cleaning the surface etc.complete as directed by Engineer-in-charge.

34 355.00 Provdg. & laying Matt finished Colour/Printed/Digital Premium 917.25 Rupees Nine Hundred Seventeen And Sqm

glazed tiles of size 300 x 300 mm or 450 x 450 mm or 600 x 600 mm Paise Twenty Five Only

or any specified size as directed by engineer in charge 6 to 8 mm th.

as approved by Engineer in Charge / Highcourt Authority In flooring

treads of steps & landings laid on a bed of 12 mm th. Cement mortar

1:3 (1cement : 3 coarsesand finished with flush pointing in white

35 2524.00 Providing and laying Colour / printed / Designer digitalized Premium 1441.22 Rupees One Thousand Four Hundred Sqm

glazed tiles of size 600mm x 300 mm or 450mm x300 mmm or any Forty One And Paise Twenty Two Only

specified size as directed by engineer in charge 8 mm to 10mm thick

as approved by Engineer in Charge in skirting risers of steps and

dado on 10 mm. Thick cement plaster 1:3 (1 cement : 3 coarse sand)

pointing in white cleaned jointed with white cement slurry.

36 616.00 Providing and laying Granite slab 18 mm thick (Average) (In Single 2153.32 Rupees Two Thousand One Hundred Fifty Sqm

Piece - Max 200 CM) one side polished flooring over 20 mm (average) Three And Paise Thirty Two Only

base of cement mortar 1:6 ( 1 cement : 6 coarse sand) or L.M. 1:1.5

laid and jointed with cement slurry including rubbing & polishing etc.

complete with aproved colour, shade and size by Architect or Engineer

in charge for all floors.

37 243.00 Providing and laying Granite slab 18 mm thick (Average) (In Single 2348.25 Rupees Two Thousand Three Hundred Sqm

Piece - Max 200 CM) one side polished in skirting, risers of steps, Forty Eight And Paise Twenty Five Only

dedo and pillars laid on 10mm thick cement mortar 1:3 (1 cement :

coarse sand) and jointed with gray cement slurry including rubbing &

polishing etc Complete including rubbing & polishing etc. complete

with aproved colour, shade and size by Architect or Engineer in

charge for all floors.

Item Quantities Item of work Estimated Estimated Rates In Words Unit Amount in Rupees

No. estimated but Rates In

may be more or Figure

38 1122.00 Providing moulding / nosing half round to polished granite stone in 98.73 Rupees Ninety Eight And Paise Seventy Rmt

flooring, risers of steps, dedo and pillars etc. complete as per Three Only

instruction of Engg in Charge.

39 1711.00 Providing and fixing of Granite slab ( Average 18 mm thickness ) of 2677.51 Rupees Two Thousand Six Hundred Sqm

Approved colour & shade for door frames , windows' sills & jambs Seventy Seven And Paise Fifty One Only

with all Exposed edges Polished, Chamfered and projected 6mm

from finished wall thickness, making scratches & skin cut on Rear

face of granite shall be sanded using clean Sand sieve no.10 passed

2mm, fixed with Araldite 1 : 0.8 (1 Resin : 0.8 Hardener ) and Dried

Atleast 36 hours before fixing on 10 mm thick cement mortar 1 : 3 (

cement : 3 coarse sand ) laid over and jointed with grey cement slurry

including rubbing and polishing and half round moulding etc.

complete. with aproved colour, shade and size by Architect or

Engineer in charge for all floors.

40 162.00 Providing and laying Acid, Alkali and chemical resistant Full Body 1521.06 Rupees One Thousand Five Hundred Sqm

High Strength [Strength Minimum > 38 N/mm²] Vitrified tiles [AS per Twenty One And Paise Six Only

IS 4457 of 2007 & ISO: 14001] of size 300 mm x 300 mm or

mm X 400mm and 12 mm or more thick of approved make [H & R

Jhonson [India], NITCO Limited, Kajaria Ceramics Limited, Oreintbell

Limited, Nexion International] shade and size for flooring and skirting

of 100mm high laid on bed of 12mm thick cement mortar 1 : 3 [1

cement: 3 coarse sand], using PVC tile spacer, flush pointing with

white cement using colour pigment, protecting the tiles with POP until

completion and handing over and cleaning subsequently before

handing over, including cost of all materials, labour, curing, complete

HOM of equipment’s and machineries, all leads and lift, loading and

unloading charges, transportation cost and conveyance of all

materials, and all other incidental charges at all floor levels etc.,

complete for successful completion of work as per drawings &

specifications and as directed by the Engineer-in-charge.

41 67.00 Providing and fixing 18mm thick both side polished telephone 2404.81 Rupees Two Thousand Four Hundred Sqm

black/brown granite for division plate of size 0.60mm X 1.20mm Four And Paise Eighty One Only

with piping edge between two urinal fixing in brick wall including

making groove in wall and fixing in C.M. 1:1 finishing etc.

complete.(For all floor)

Item Quantities Item of work Estimated Estimated Rates In Words Unit Amount in Rupees

No. estimated but Rates In

may be more or Figure

42 11.00 Providing & Fixing Sandwich type Platform of 600 mm wide using 7041.01 Rupees Seven Thousand Forty One And Sqm

Top 18 mm thick granite of approved shade and sample and bottom Paise One Only

25 mm thick single side Polished kota stone with 25 mm thick screed

of cement mortar 1:3 With granite Facia Patti and vertical End granite

supports. The stone shall be fixed by chassing in to the wall surface

and supported vertically with 25mm thick sandwich kota stone

support including SS Sink of size 610 x 460 mm waste brass

coupling, stainless steel extension nipple, flexible PVC outlay pipe,

Hindware Sink cock with Casted Swinging Spout F100034 etc

complete as suggested by Architect/Engineer -in-charge.

43 15.00 Providing & Fixing Sandwich type Platform of 600 mm wide using 4551.26 Rupees Four Thousand Five Hundred Fifty Sqm

Top 18 mm thick granite of approved shade and sample and bottom One And Paise Twenty Six Only

25 mm thick single side Polished kota stone with 25 mm thick screed

of cement mortar 1:3 With granite Facia Patti and vertical End granite

supports. The stone shall be fixed by chassing in to the wall surface

and supported vertically with 25mm thick sandwich kota stone

support etc complete as suggested by Architect/Engineer -in-charge.

44 162.00 Providing and laying 25 mm thick double polished Kota stone 1314.21 Rupees One Thousand Three Hundred Sqm

Shelves in single piece including fixinng in position in cement mortar Fourteen And Paise Twenty One Only

1:3 (1 cement : 3 coarse sand) and joined with grey cement slurrly

including moulding machine cut open edge as dircted by Engineer in

charge etc complete as per detailed drawing and as Instructed by

Engineer In charge.

45 685.00 Providing and laying Cement concrete1:2:4 flooring( 1 cement : 2 7031.22 Rupees Seven Thousand Thirty One And Cum

coarse sand : 4 graded stone aggregates 20 mm. nominal size) and Paise Twenty Two Only

curing complete excluding cost of from work.

46 1919.00 Providing and laying broken china mosaic flooring for plain and 747.29 Rupees Seven Hundred Forty Seven And Sqm

curve surfaces.12 mm.to 20 mm.of broken pieces of ceramic Paise Twenty Nine Only

tiles,glazed tiles (one or more colour as directed) to be laid over cement

mortar bedding of C.M.1:3 to plain or slopes and to be tempered to

bring mortar cream up to surface with using white cement and colour

pigment including rounding of junctions and extending them up to

Cms.along the wall and curing with bends,any patterns or design as

per drawing and direction including cleaning with water and oxilic

acid including using water proofing material at the rate of 1 Kg./bag

Item Quantities Item of work Estimated Estimated Rates In Words Unit Amount in Rupees

No. estimated but Rates In

may be more or Figure

47 500.00 Providing cement vata (10 cm x 10 cm size) quarter round in cement 23.68 Rupees Twenty Three And Paise Sixty Rmt

mortar 1:1 including neat cement finishing, watering etc complete. Eight Only

48 50.00 Providing and Fixing 35 mm thick openable Double shutter both side 3500.66 Rupees Three Thousand Five Hundred Sqm

laminated flush door with 1.0 mm thick pattern lamination of the And Paise Sixty Six Only

standard make on both side, machine glued PVC beadind on

Pheryphery, 'I' shape Pull Handles 300 mm long of 32 mm diameter of

S.S. grade 304 as per approved by Engineer - in - Charge, one number

of 10 mm diameter 6" long anticorrosive high grade AISI 304 stainless

steel tower bolt in satin finish as per approved by Engineer in Charge,

four numbers of anticorrosive high grade AISI 304 stainless steel

hinges of size 102 mm x 76 mm x 3 mm as per approved by Engineer

in Charge and anticorrosive high grade AISI 316 stainless steel,

mm diameter x 250 mm long aldrap in satin finish and one number of

cylindrical magnetic door catch as per approved by Engineer in charge

oil painting / polishing to sides of shutters etc. complete.

49 1129.00 Providing and Fixing 35 mm thick openable Single shutter both side 3345.12 Rupees Three Thousand Three Hundred Sqm

laminated flush door with 1.0 mm thick pattern lamination of the Forty Five And Paise Twelve Only

standard make on both side, machine glued PVC beadind on

Pheryphery, 'I' shape Pull Handles 200 mm long of 32 mm diameter of

S.S. grade 304 as per approved by Engineer - in - Charge, one number

of 10 mm diameter 6" long anticorrosive high grade AISI 304 stainless

steel tower bolt in satin finish as per approved by Engineer in Charge,

four numbers of anticorrosive high grade AISI 304 stainless steel

hinges of size 102 mm x 76 mm x 3 mm as per approved by Engineer

in Charge and anticorrosive high grade AISI 316 stainless steel,

mm diameter x 250 mm long aldrap in satin finish and one number of

cylindrical magnetic door catch as per approved by Engineer in charge

oil painting / polishing to sides of shutters etc. complete.

Item Quantities Item of work Estimated Estimated Rates In Words Unit Amount in Rupees

No. estimated but Rates In

may be more or Figure

50 32.00 Providing and fixing F R P Frame size 100 x 50 mm and 35 mm 2377.76 Rupees Two Thousand Three Hundred Sqm

thick FRP shutter with 3.2mm high densified molded wood fiber skin Seventy Seven And Paise Seventy Six Only

with wood grain raised panelled design finish shutter having extra

reinforcement on sides and edges and in Gel coat finish. The core of

the shutter is to be filled up with injected fire retardant grade

Polyurethene foam done in situ along with embedded wooden pieces

for stiffening and also for taking hinges and fixtures. The whole FRP

frame and shutter is to be water proof, weather proof, termite proof

and resistance to mild acid/alkali. Rates are to be inclusive of S.S.

hinges with necessary screws and alluminium have ISO 9001-2000

51 180.00 Providing and fixing Casement type window Two Track Openable 3842.14 Rupees Three Thousand Eight Hundred Sqm

shutter having extruded aluminum Colour anodized section of Jindal Forty Two And Paise Fourteen Only

or equivalent Section No. 20558, 20559, 20560 & 19391 including

mm thick transparent tinted float glass and one Openable shutter

with SS ASI grade 304 jali of IS 85 G with wire of diameter 0.56 mm

Mosquito Net shutter with standard extruded colour anodized

aluminum fittings and fixtures, rubber gasket, air lock strip and

finishing joints with silicon sealant glass fixing to frame as per details

52 299.00 Providing and fixing Three track Sliding window with with SS ASI 3678.42 Rupees Three Thousand Six Hundred Sqm

grade 304 jali of IS 85 G with wire of diameter 0.56 mm Mosquito Net Seventy Eight And Paise Forty Two Only

shutter having extruded aluminum Colour anodized section frame

Two sliding shutters of Top & bottom member of Jindal or equivalent

Section no:20993 @ wt.of 0.642 Kg/mt, Vertical Inernal Lock member

of Jindal or equivalent Section no:20550 @ Wt.0.693 Kg/mt, Vertical

side (Handle) member of Jindal or equivalent Section no:20549 @ Wt.

0.809 Kg/mt and Outer Bottom members with Gutters of Window

frames of Jindal or equivalent Section no:20928 @ wt.of 1.374 Kg/mt,

Outer Top & side members of Window frames of Jindal or equivalent

Section no:20837 @ wt.of 1.066 Kg/mt with 5 mm thick transparent

tinted float glass and one sliding shutter with mosquito net with

standard extruded colour anodized aluminum fittings and fixtures,

rubber gasket, air lock strip and finishing joints with silicon sealant

glass fixing to frame as per details etc. complete.

Item Quantities Item of work Estimated Estimated Rates In Words Unit Amount in Rupees

No. estimated but Rates In

may be more or Figure

53 51.00 Providing and fixing Three track Sliding window having extruded 3597.62 Rupees Three Thousand Five Hundred Sqm

aluminum Colour anodized section frame Three sliding shutters of Top Ninety Seven And Paise Sixty Two Only

& bottom member of Jindal or equivalent Section no:20993 @ wt.of

0.642 Kg/mt, Vertical Inernal Lock member of Jindal or equivalent

Section no:20550 @ Wt.0.693 Kg/mt, Vertical side (Handle) member of

Jindal or equivalent Section no:20549 @ Wt. 0.809 Kg/mt and Outer

Bottom members with Gutters of Window frames of Jindal or

equivalent Section no:20928 @ wt.of 1.374 Kg/mt, Outer Top & side

members of Window frames of Jindal or equivalent Section no:20837

@ wt.of 1.066 Kg/mt with 5 mm thick transparent tinted float glass

with standard extruded colour anodized aluminum fittings and

fixtures, rubber gasket, air lock strip and finishing joints with silicon

sealant glass fixing to frame as per details etc. complete.

54 131.00 Providing and Fixing fully adjustable, alluminium colour anodized 2713.87 Rupees Two Thousand Seven Hundred Sqm

glazed louvered ventilator using main frame of section No 20125 Thirteen And Paise Eighty Seven Only

having weight of 0.861 kg/m, using 5 mm thick 100 mm wide

transparent glass blade louver having dual controls i.e. two right and

two left handles including powder coating to metal work etc. complete.

55 19741.00 Providing & fixing M. S. grills of required pattern to wooden or other 101.17 Rupees One Hundred One And Paise Kg

frames of windows etc. with either M.S. flats or M.S. pipes at required Seventeen Only

spacing & frame around, square or round bars with round headed

bolts & nuts or by screws. (A) Plain grill.

56 2016.80 Painting three coats (one coat of priming coat + two coats of enamel 122.49 Rupees One Hundred Twenty Two And Sqm

paint) on new steel and other metal surface with enamel paint Paise Forty Nine Only

including preparing the surface by throughly cleaning, oil, grease, dirt

and other foreign matter and scoured with brushes fine steel wood,

scrapers and sand paper etc. comp.

57 726.00 Providing and fixing 50mm dia S.S.Pipe railing of 16 G of ASIS Grade 1305.93 Rupees One Thousand Three Hundred Rmt

316 with necessary supporting arrangement and as per instruction of Five And Paise Ninety Three Only

engineer in charge.

58 303.00 Providing and fixing Stainless Steel Hand rail having 50 mm dia 1886.68 Rupees One Thousand Eight Hundred Rmt

hollow stainless steel pipe as hand rail and 10 cm long 20 mm dia Eighty Six And Paise Sixty Eight Only

pipe as vertical supports having threaded screw to fix the suppoet

including cutting bending welding & fabrication the structure as per

drawing including finishing etc complete

Item Quantities Item of work Estimated Estimated Rates In Words Unit Amount in Rupees

No. estimated but Rates In

may be more or Figure

59 246.00 Providing and fixing Stainless Steel railing having 50 mm dia hollow 4045.05 Rupees Four Thousand Forty Five And Rmt

stainless steel pipe as hand rail and 32 mm dia hollow stainless steel Paise Five Only

pipe with combination of 10 cm long 16 mm dia pipe as vertical

supports 16 mm dia hollow stainless steel pipes as intermediate

members running through stainless steel 30 mm dia solid runners

having threaded screw to fix the runner with vertical suppoet

including cutting bending welding & fabrication the structure as per

drawing including finishing etc complete

60 71.00 Providing and fixing wash down wall hung water closet(European 28443.62 Rupees Twenty Eight Thousand Four No

type) SLS-WHT-0117 of jaquar or Kolher K-8752IN-S or Cera croma Hundred Forty Three And Paise Sixty Two

pan with integral 'P' trap jointed within C.I pipe in C:M 1:1 including Only

matching seat cover, chair braket, Conceled metropole of jaquar FLV-

CHR-1093 or cera CM 102 or Hindware F850029, 2 way bibcock of

jaquar FLR-CHR-5041N or Cera CQ406 or K-37320IN-4, health foucet

/ jet spray of jaquar ALD-CHR-573 or Cera CG205 or Kohler K-

12925IN with 1 m extension pipe, toilet paper holder of jaquar ACN-

CHR-079 or Cera CA 102 or Kohler K-10705D with all accessories etc.

61 45.00 Providing and fixing wash down water closet Orrisa type pan Hind 5200.09 Rupees Five Thousand Two Hundred And No

ware 20004 or equivalent of size 580mm x 440mm size with 'P' or 'S' Paise Nine Only

trap jointed with C.I. pipes in C.M. 1:1 including fixing 25mm C.P.

brass half turn flush cock with C.P. brass wall flange, Hindware

F850016 or equivalent etc. complete.(For all Floor)

62 152.00 Providing and fixing flat back Wash basin Hindware brand 10087 or 7503.29 Rupees Seven Thousand Five Hundred No

equivalent, wall mounted 550 x 400 mm size Mario Starwhite or Three And Paise Twenty Nine Only

equivalent with C.I. or M.S. bracket including cutting holes and

making good the same including fixing C.P. brass Hindware Pillar

Cock F330002 or equivalent, Hindware Angular stop Cock F

or equivalent, C.P. brass extension nipple 62 mm long, S.S. flange

water super connection pipe 60cm. long and full thread waste

coupling F850001 or equivalent etc. complete.

Item Quantities Item of work Estimated Estimated Rates In Words Unit Amount in Rupees

No. estimated but Rates In

may be more or Figure

63 13.00 Providing and fixing wash basin counter size 0.9 x 0.60 M using 18 15319.68 Rupees Fifteen Thousand Three Hundred No

mm thick polished granite slab of approved colour and shade for top Nineteen And Paise Sixty Eight Only

with 1 Nos. of wash basin Jaquar brand ARS-WHT-0576 or Cera

columbia or Kohler K-17156K, C.P. brass Jaquar pillar cock FLR-CHR-

5021N or Cera CQ 430 or Kohler K-16312IN-4, angle valve FLR-CHR-

5053N or cera CQ 408 or Kohler K-11566IN-7, C.P. brass extension

nipple 62mm long, S.S. flange water super connection pipe 60cm.

long and full thread waste coupling includingm, bottle trap making

hole in vitrified granite for wash basin etc. complete as approved by

Engineer in charge or Highcourt authority or Architect . (For all floor)

64 92.00 Providing and fixing urinals URS-WHT-703 of jaquar or Cera Urinal 12275.54 Rupees Twelve Thousand Two Hundred No

5013 or Kohler K-5017in-ER with integral drain pipe jointed within Seventy Five And Paise Fifty Four Only

C.I pipe in C:M 1:1, Conceled cock, all accessories etc. complete.

65 225.00 Providing and fixing 15 mm diameter SOLO Chromium plated angular 1770.53 Rupees One Thousand Seven Hundred No

shape bib cock with wall flange of the make JAQUAR ((ORP-10037PM) Seventy And Paise Fifty Three Only

/ LAURET / KOHLER or equivalent as approved by Engineer in

66 220.00 Providing and fixing Solo concealed Stop cock, Regular Body with 1190.49 Rupees One Thousand One Hundred No

adjustable wall flange of 15 mm diameter of the make JAQUAR (ARI- Ninety And Paise Forty Nine Only

39053) / LAURET / KOHLER or equivalent as approved by Engineer

67 482.00 Providing and fixing 5 mm thick mirror of approved quality and make 992.83 Rupees Nine Hundred Ninety Two And No

size 600 x 450 mm with moulding edge by using 4.0 mm thick hard Paise Eighty Three Only

board and fixing on wall with C. P.brass studs etc. complete. For all

68 46.00 Providing and fixing stainless steel napkin ring of the make JAQUAR 780.73 Rupees Seven Hundred Eighty And Paise No

/ LAURET KOHLER or as equivalent approved by Engineer - in - Seventy Three Only

charge in satin finish etc. complete as directed.

69 110.00 Providing and fixing Soap Holder of Jaquar ACN-1131N / Kohler / 725.94 Rupees Seven Hundred Twenty Five And No

Plumber or equivalent including necessary S.S. screw with labour etc. Paise Ninety Four Only

70 105.00 Providing and fixing 600 long towel rack with hanger of the make 2605.80 Rupees Two Thousand Six Hundred Five No

JAQUAR (Cat. No. CAN-1181N) / LAURET / KOHLER or as equivalent And Paise Eighty Only

as approved by Engineer in Chage etc. complete.

71 105.00 Providing bathroom accessories cloth hanger door of minimum four 303.00 Rupees Three Hundred Three Only No

hook with M S powder coated high grade quality and approved brand

as approved by Engineer in Chage etc. complete.

Item Quantities Item of work Estimated Estimated Rates In Words Unit Amount in Rupees

No. estimated but Rates In

may be more or Figure

72 105.00 Providing and fixing C.P.brass shower rose with 15 mm or 20 mm 1111.00 Rupees One Thousand One Hundred No

inlet. (A) 200 mm dia. Eleven Only

73 48.00 Providing and fixing gun metal check or non return full way Handle 420.63 Rupees Four Hundred Twenty And Paise No

valve. Zoloto or equivalent make ( C ) 25 mm dia. Sixty Three Only

74 48.00 Providing and fixing gun metal check or non return full way handle 663.43 Rupees Six Hundred Sixty Three And No

valve. Zoloto or equivalent make ( E ) 40 mm dia. Paise Forty Three Only

75 4.00 Providing and fixing gun metal check or non return full way handle 2106.86 Rupees Two Thousand One Hundred Six No

valve. Zoloto or equivalent make ( E ) 50 mm dia. And Paise Eighty Six Only

76 2.00 Providing and fixing gun metal check or non return full way handle 2285.13 Rupees Two Thousand Two Hundred No

valve. Zoloto or equivalent make ( E ) 65 mm dia. Eighty Five And Paise Thirteen Only

77 48.00 Providing and fixing Coccealed stop cock, Extra heavy body with 2060.40 Rupees Two Thousand Sixty And Paise No

adjustable wall flange of 40mm dia of the make as approved by Forty Only

Engineer -in Charge.

78 100.00 Providing, Laying and jointing in true line and level U.P.V.C. 75mm 1024.14 Rupees One Thousand Twenty Four And Rmt

pipe (SCH-80) of following dia. Including fittings as approved by Paise Fourteen Only

Engineer-in-charge. Pipe shall be fixed on the wall with the help of Z

Patti at every 2000 mm center to center or shall be concealed as

directed including necessary fittings etc. including testing of pipe and

joints and fixing the same with adhesive solvent, including cost of all

79 80.00 Providing, Laying and jointing in true line and level U.P.V.C. 65mm 1132.21 Rupees One Thousand One Hundred Rmt

pipe (SCH-80) of following dia. Including fittings as approved by Thirty Two And Paise Twenty One Only

Engineer-in-charge. Pipe shall be fixed on the wall with the help of Z

Patti at every 2000 mm center to center or shall be concealed as

directed including necessary fittings etc. including testing of pipe and

joints and fixing the same with adhesive solvent, including cost of all

80 200.00 Providing and fixing conceled center point to wall ceiling and floor 653.77 Rupees Six Hundred Fifty Three And Paise Rmt

CPVC( SDR 13.5) pipe having National Senitation Foundation (NSF) Seventy Seven Only

seal for potable water of following nominal dia, tube fittings and Z

clamps including making good the wall ceiling and floor etc. complete.

Item Quantities Item of work Estimated Estimated Rates In Words Unit Amount in Rupees

No. estimated but Rates In

may be more or Figure

81 240.00 Providing and fixing conceled center point to wall ceiling and floor 442.04 Rupees Four Hundred Forty Two And Rmt

CPVC( SDR 13.5) pipe having National Senitation Foundation (NSF) Paise Four Only

seal for potable water of following nominal dia, tube fittings and Z

clamps including making good the wall ceiling and floor etc. complete.

82 960.00 Providing and fixing conceled center point to wall ceiling and floor 249.72 Rupees Two Hundred Forty Nine And Rmt

CPVC( SDR 13.5) pipe having National Senitation Foundation (NSF) Paise Seventy Two Only

seal for potable water of following nominal dia, tube fittings and

clamps including making good the wall ceiling and floor etc. complete.

83 480.00 Providing and fixing conceled center point to wall ceiling and floor 205.00 Rupees Two Hundred Five Only Rmt

CPVC( SDR 13.5) pipe having National Senitation Foundation (NSF)

seal for potable water of following nominal dia, tube fittings and

clamps including making good the wall ceiling and floor etc. complete.

84 240.00 Providing,laying and jointing in true line and level 110 diametre 835.15 Rupees Eight Hundred Thirty Five And Rmt

U.P.V.C (Type B) conforming to IS 13592-1992 with one end plain Paise Fifteen Only

and other end socketed with rubberring, & fittings conforming to IS

I14735-1999 of approved make for drainage system pipeline, pipe

shall be jointed with each other with rubber lubricant, pipe shall be

fixed on wall using of Z clamp of the required size at every 2000 mm

center to center or shall be concealed in wall as directed including

necessary fittings such as bends, shoes etc. including testing of pipe

and joints and jointed with adhesive solvent cement including cost of

85 240.00 Providing laying and jointing in true line and level 90 dia. P.V.C. SWR 764.28 Rupees Seven Hundred Sixty Four And Rmt

(Type 'B') with one end plain and other end socketed with rubber ring , Paise Twenty Eight Only

pipe and fittings conforming to IS 13592 of the make as approved by

Engineer In Charge. pipe shall be fixed on the wall with the help of Z

clamp at every two metre C/C or shall be concelled as directed

including necessary fittings such as bends, tee, shoes etc. including

testing of pipe and joints and fixing the same with PVC Clamp with

adhesive solvent cement including cost of all material.

Item Quantities Item of work Estimated Estimated Rates In Words Unit Amount in Rupees

No. estimated but Rates In

may be more or Figure

86 120.00 Providing,laying and jointing in true line and level 160 diametre 831.22 Rupees Eight Hundred Thirty One And Rmt

U.P.V.C (Type B) conforming to IS 13592-1992 with one end plain Paise Twenty Two Only

and other end socketed with rubberring, & fittings conforming to IS

I14735-1999 of approved make for drainage system pipeline, pipe

shall be jointed with each other with rubber lubricant, pipe shall be

fixed on wall using of Z clamp of the required size at every 2000 mm

center to center or shall be concealed in wall as directed including

necessary fittings such as bends, shoes etc. including testing of pipe

and joints and jointed with adhesive solvent cement including cost of

87 320.00 Providing and fixing to wall ceiling and floor 10.0 Kg.F/Cm2 working 336.24 Rupees Three Hundred Thirty Six And Rmt

pressure poluthene pipes of the following outside Dia. Low densidy, Paise Twenty Four Only

complete with special falnge compression type fittings, wall clips etc.

including making good the wall ceiling and floor. (G)110 mm

88 346.00 Providing and fixing to wall ceiling and floor 10.0 Kg.F/Cm2 working 277.43 Rupees Two Hundred Seventy Seven And Rmt

pressure poluthene pipes of the following outside Dia. Low densidy, Paise Forty Three Only

complete with special falnge compression type fittings, wall clips etc.

including making good the wall ceiling and floor. (F)75 mm

89 330.00 Providing and fixing PVC SWR Nahni Trap IS 14735 for drain 100 571.08 Rupees Five Hundred Seventy One And No

mm dia with jali of following nominal Diameter of self cleaning design Paise Eight Only

with CI scread down or hinged grating including the cost of cutting

and making good the wall.

90 24.00 Providing and fixing S.W. Gully trap with brick masonry chamber & 1175.64 Rupees One Thousand One Hundred No

water tight fiber reinforced cover with frame of 300 mm x 300 mm x Seventy Five And Paise Sixty Four Only

50 mm.size having cover weight 2.50 kg & frame weight 7 kg [I]

Square mouth trap (A) 160 mm. x 110 mm. size P-type or R type.

91 70.00 Providing and laying in trenches 10 Kgf/sqmt. working pressure I.S.I. 957.48 Rupees Nine Hundred Fifty Seven And Rmt

mark PVC SWR pipe of 160 mm dia low density pipe including fitting Paise Forty Eight Only

etc complete in ground.

Item Quantities Item of work Estimated Estimated Rates In Words Unit Amount in Rupees

No. estimated but Rates In

may be more or Figure

92 90.00 Constructing brick masonary chamber of 500 mm x 700 mm inside 4836.89 Rupees Four Thousand Eight Hundred No

dimension and depth upto 0.45 m for under ground CI inspection Thirty Six And Paise Eighty Nine Only

chamber and bends with bricks having crushing strength not less

than 35 Kg/Sqmt. in CM. 1:5 precast fibre reinforced concrete frame

& cover of square frame of approx 455x610x150mm & round cover

75mm thick, RCC top slab CC 1:2:4 ( 1 cement : 2 coarse sand :

graded stone aggregate 20 mm nominal size ) foundation concrete

1:5:10 inside plaster 15 mm thick with cement mortar 1:3 finished

smooth with a floating coat of neat cement on walls and bed concrete

93 30.00 Extra over for every additional depth of 0.10m or part thereof beyond 2648.62 Rupees Two Thousand Six Hundred Forty Rmt

0.45 m depth for brick masonry chamber. (II) For 500 mm x 700 mm Eight And Paise Sixty Two Only

94 40000.00 Providing and fixing P.V.C. water tank of triple layer white colour as 12.16 Rupees Twelve And Paise Sixteen Only Litre

approved by engineer in charge etc. comp. on terrace.

95 8.00 Providing and fixing 50 mm dia copper metal ball cock of approved 189.84 Rupees One Hundred Eighty Nine And No

quality as directed. Paise Eighty Four Only

96 345.00 Providing, filling and laying Cinder for all floors etc complete: (a) 1393.80 Rupees One Thousand Three Hundred Cum

Filing in sunk. Ninety Three And Paise Eighty Only

97 1567.00 Providing and laying Synroof High bond ecentromentric premium 569.64 Rupees Five Hundred Sixty Nine And Sqm

quality acrylic coating as a water proofing membrance finished which Paise Sixty Four Only

consists of a coat of bitumine primer & 80 CSM membrance in sunk

slab with ulraviolet resistance and working upto any height etc.

complete as directed by Engineer in charge

98 2484.00 Providing & fixing stainless steel block letters up to 12" height size 135.90 Rupees One Hundred Thirty Five And Inch

including radiam character as per the details & design given by Paise Ninety Only

Engineer-in-charge inluding scaffolding etc. complete

99 12480.00 Providing & fixing Stainless steel Name plate including colour iching 34.85 Rupees Thirty Four And Paise Eighty Five Sq. Inch

the character on the plate as per requirement & design given by Only

engineer in charge incl. scaffolding etc. complete.

100 13.00 Design, supply & installation of Signages including normal lettering 5850.93 Rupees Five Thousand Eight Hundred Sqm

with additional raised tactile and graphical symbols, height 15 mm to Fifty And Paise Ninety Three Only

55 mm Brailleb text and Braille locator made of zink sulphide based

glow in the dark rigid sheet with high luminous property enclosed in a

transperent weather proof U/V stabilised plastic pasted on 3 mm

thick clear acrylic sheet sheet.

Item Quantities Item of work Estimated Estimated Rates In Words Unit Amount in Rupees

No. estimated but Rates In

may be more or Figure

101 64.00 Charges for making holes from 100 mm to 160 mm dia in RCC wall, 4065.25 Rupees Four Thousand Sixty Five And Rmt

slabs or any other RCC members by diamond core cutting machine of Paise Twenty Five Only

HILTI or equivalent including disposing the debris. For all floors .

102 2540.00 Providing and laying in position Rebar as specified in true line & level 226.24 Rupees Two Hundred Twenty Six And Nos

including drilling adequate hole, cleaning the same, grouting with Paise Twenty Four Only

HILTI, HY - 200 rebar system as per manufacturers specifications

strictly in accordance with structural details having minimum depth

of embedment 125, etc complete For all floors (a) 10 to 12 mm dia

103 74.00 Providing and Fixing 15 mm thick 300 mm x 300 mm Tactile 1364.51 Rupees One Thousand Three Hundred Sqm

Warning Tiles (Attention Tiles i.e. Tactile Warning Surface Indicator Sixty Four And Paise Fifty One Only

{TWSI}) of Johnsan Endura Tac Button Yellow Plus or equvqlent make

in flooring laid on 20 mm thick cement mortar 1:6 (1 cement :

coarse sand) on new surface and jointed with cement slurry including

finished with flush pointing & cleaning the surface for all floors as per

detailed drawing etc. complete as directed by Architect or Engineer in

charge. Thse tiles shall be Anti Skid, Chemical Resistant, Fade Proof,

Frost - Heat & Weather Proof, High Flexural Strength, Highly Durable,

Stain Resistance . All Tactile Warning Tiles meet the specific size and

dimension standards as required by ISO/FDIS

104 23.00 Provdg. & fixing in position collapsible steel shutters with vertical 5445.14 Rupees Five Thousand Four Hundred Sqm

channels 20 x 10 x 2 mm braced with flat iron diagonals 20 x 5 mm Forty Five And Paise Fourteen Only

size with top & bottom rails of T iron 40 x 40 x 6 mm with 38 mm dia.

Steel pulleys complete with bolts, nuts locking arrangements,

stoppedrs handles including applying a priming coat of red lead paint.

105 654.00 Providing and fixing chicken mesh jali with square of 25 gauge at 251.49 Rupees Two Hundred Fifty One And Paise Sqm

junction the masonary and RCC member including necessary Forty Nine Only

scafolding, labour etc.complete for all floors.

106 7500.00 Add for more consumption of cement due to change in concreting of 5.28 Rupees Five And Paise Twenty Eight Only Kg

controlled / RMC cement concrete of any grade in R.C.C. members

like column footings, columns, beams, pardi, vertical and horizontal

fins etc. instead of controlled / RMC cement concrete M200 / M250 /

M300 / M350 as per design mix with compare to cement consumption

given in special condition including loading, unloading, stacking and

labour charges for using in mixer machine for concreting etc.

Item Quantities Item of work Estimated Estimated Rates In Words Unit Amount in Rupees

No. estimated but Rates In

may be more or Figure

107 535.00 Providing and fixing pre-cast concrete kerb stone of gray cement 361.64 Rupees Three Hundred Sixty One And Rmt

based concrete block 30cm length,30cm height and 15cm thick of Paise Sixty Four Only

M250 grade concret as per approved design and including excavation

for fixing in proper line and level,filling the joint with C:M 1:3

(1cement:3fine sand) etc complete.

108 1841.00 Providing and fixing pre-cast Rubber Dye /Steel dye inter locking 686.90 Rupees Six Hundred Eighty Six And Paise Sq.m

concrete block 60mm thick with grade of concrete M300 pnumatic Ninety Only

compressed / Vibrated mechanically pressed and as per approved

design confirming to IS 15658 : 2006 including 35mm Sand layer

for levelling and filling the joint with sand in proper line and level as

per guidelines of IRC : SP 63-2018 etc complete.

109 1052.00 Providing and applying 2mm thick Texture paint of Earthen Textures, 546.41 Rupees Five Hundred Forty Six And Paise Sq.m

Travertino Texture, Coral texture or equivalent make incorporating Forty One Only

fine filaments made of polymer and aggregating natural stone powder

with making grooves on existing base coat of 20 mm thick smooth

mala plaster etc. Complete Exterior weather proof two coat paint in

any shade as approved by Architect/ Engineer in charge for all floor

all height including all leads and lifts.

110 1212.00 Box cutting the road surface to proper slope and chamber for making 102.93 Rupees One Hundred Two And Paise Cum

a base for road work including removing the excavated staff and Ninety Three Only

depositing on the road side slope as directed upto 50 mt lead.

111 371.00 Providing and laying, spreading and compacting B.T.M.C. stone 2225.03 Rupees Two Thousand Two Hundred Cum

aggregates of 63mm to 40mm size to Water Bound Macadam Twenty Five And Paise Three Only

including spreading in uniform thickness, hand packing, rolling with

vibratory roller 8-10 tones to proper grade and camber, applying and

brooming requisite type of screening / binding / filler materials to fill

up the interstices of coarse aggregate, watering and compacting to

the required density. Grading - II using screening type - A

(13.2mm Agg.) etc. complete.

Item Quantities Item of work Estimated Estimated Rates In Words Unit Amount in Rupees

No. estimated but Rates In

may be more or Figure

112 317.00 Providing & Laying M 250 grade RMC concrete without fly ash 5887.29 Rupees Five Thousand Eight Hundred Cum

trimix using P21(water reducing concrete admixture at 100 ml per Eighty Seven And Paise Twenty Nine Only

bag of cement & recron 3 s fiber at 125 gm per bag of cement

including making C channel 75 x 75 mm required to maintain level,

slope and thickness of the concrete road leveling of placed concrete

with surface vibrator and finishing with power floater & trowel light

brooming the surface & including Construction joints to be formed at

every 5 mt distance by grooving with mechanical saw within 48 hrs.

Groove/sawed joints shall be made of 5 mm width and depth min

(1/3 rd depth of the pavement) as shown in the drawing and shall be

filled with ready to use PU sealant of UV grade cutting & filling of

expansion joint as directed by Engineer in charge.

113 95152.00 Providing IS Mark TMT FE-550D bar reinforcement for RCC work 94.99 Rupees Ninety Four And Paise Ninety Nine Kg

including bending & placing in position complete up to All floor Level. Only

(Primary Producer Steel TATA, RINL, VIZAG, SAIL, JSW) (Sump, Comp

114 55146.00 Providing and Fixing Structural Steel of M.S. Hollow section pipe of 85.95 Rupees Eighty Five And Paise Ninety Five Kg

fabrication work including using Anchor fastner, Bolt for support, Only

safety bars for using all type of section of any circular, square hollow

pipe of any diameter and any thickness of any desired shape and size

115 4400.00 Steel work welded, in built up sections, framed work including 84.13 Rupees Eighty Four And Paise Thirteen Kg

cutting, hoisting, fixing in position and applying a priming coat of red Only

lead paint (A) In beams and joists, channels, angles, tees, flats with

connecting plates or angle cleats as in main & cross beamnship &

jack rafters, purlins connected to common rafters and like.

116 1335.00 Providing Manglore tile pattern Galvalume sheet of 0.60 - 1.20 mm 1328.90 Rupees One Thousand Three Hundred Sqm

(BMT) thick and AZM 150 to AZM 210 coating (The alloy coated Twenty Eight And Paise Ninety Only

product contains 55% alluminium, 43.5% zinc and 1.5% silicon by

weight) roofing fixed with galvanized iron J or L Hooks, Bolts and nuts

8mm dia with hexagonal nut, rubber and GI sheet cup (limpet) washer

only. (with 6mm insulation sheet) filled with white lead complete

excluding the cost of purlins, rafters and trusses as per instruction of

Engineer in Charge etc Complete.

117 800.00 Drilling of bore hole an alluvial strata by mud flush direct rotary ring 600.95 Rupees Six Hundred And Paise Ninety Rmt

size 250mm-300mm diameter. Five Only

Item Quantities Item of work Estimated Estimated Rates In Words Unit Amount in Rupees

No. estimated but Rates In

may be more or Figure

118 300.00 Reaming of 250-300 mm dia.pilot boer hole including assembling 366.63 Rupees Three Hundred Sixty Six And Rmt

lowering housing casing strainer pipe gravel packing etc.complete size Paise Sixty Three Only

550mm diameter.

119 250.00 Manufacture, supply and delivery of ISI marked ERW M.S. pipes 3605.70 Rupees Three Thousand Six Hundred Five Rmt

conforming to IS: 4270/2001 with latest amendment in rendom length And Paise Seventy Only

of 4 to 7 meter size 250mm diameter (minimum 7.10mm thickness)

120 60.00 Manufacture, supply and delivery of cage type Trapezoidal shape ('V') 3088.58 Rupees Three Thousand Eighty Eight And Rmt

wire wound low carbon, Galvanized screen pipe confirming IS: 8110 Paise Fifty Eight Only

GWSSB R/C (E) 250 mm dia (1) Having Size of 1.0 mm slot (Heavy

121 15.00 Manufacture, supply and delivery of cage type Trapezoidal shape ('V') 2001.82 Rupees Two Thousand One And Paise Rmt

wire wound low carbon, Galvanized screen pipe confirming IS: 8110 Eighty Two Only

GWSSB R/C (D) 200 mm dia (1) Having Size of 1.0 mm slot (Heavy

122 1.00 Clamps made from M.S plate with 3 no`s hole either side with nuts & 2037.91 Rupees Two Thousand Thirty Seven And Pair

boltd of standarad make size 900mm x 100mm x 16mm suitable for Paise Ninety One Only

250mm diameter pipe.

123 1.00 Bore plug having 100mm height made from M.S plate with 3 no`s 1161.62 Rupees One Thousand One Hundred Sixty No

holes at equal distace on circumference for nut bolts type locking One And Paise Sixty Two Only

arrangements with nut bolts & lock nuts of standarad make complete

from 5mm thick M.S plate (for top also) suitable 250mm diameter

124 1.00 Supply of ISI marked portland cement of store or site of works 5286.34 Rupees Five Thousand Two Hundred Ton

including all tax with loading, unloading, freight etc. complete as Eighty Six And Paise Thirty Four Only

125 300.00 Supply of misc bore materials like steel bent plate suitable for ERW 91.71 Rupees Ninety One And Paise Seventy One No

pipe of dia 250 mm of size 200m X 150mm X 6mm. Only

126 25.00 Supply of well sorted "Sevalliya" gravels of size 40 mm to 63 mm 2049.29 Rupees Two Thousand Forty Nine And Cmt

including carting loading, unloading & stacking at site of work. Paise Twenty Nine Only

127 25.00 Supply of clay ball having size of 25mm to 50mm from Sicky Clay at 758.51 Rupees Seven Hundred Fifty Eight And Cmt

site of work as certified by hydrologist. Paise Fifty One Only

128 1.00 Cement seiling if necessary including the cost of cement by means of 13405.73 Rupees Thirteen Thousand Four Hundred Job

mud pump. Five And Paise Seventy Three Only

Item Quantities Item of work Estimated Estimated Rates In Words Unit Amount in Rupees

No. estimated but Rates In

may be more or Figure

129 1.00 Charges of electrologging test of bore hole.Uptron make electrologger. 18180.00 Rupees Eighteen Thousand One Hundred Job

130 1.00 Lowering and removing of 100mm dia.drop line and 32mm dia air line 27720.46 Rupees Twenty Seven Thousand Seven Job

for development of each water bearing zones comes across upto the Hundred Twenty And Paise Forty Six Only

full depth of deep tube well size 200mm/250mm/300mm dia. For the

tube well having depth of 186 meters and above through suitable air

compressor.The job is for complete period of development of tube well

without air compressor charges. (Min 8 Hrs. & upto Sand free

131 12.00 Charges of air compressor of 900 CFM/200 PSI including all the 8499.15 Rupees Eight Thousand Four Hundred Hour

require accessories and machinaries.(Min 6hr. & upto sand free Ninety Nine And Paise Fifteen Only

132 1.00 Geohydrological ground water investigation (with vehicle charges) deep 14428.86 Rupees Fourteen Thousand Four Hundred Bore

tube well (with water sample testing) for 200mm/250mm diameter Twenty Eight And Paise Eighty Six Only

deep tube well (with water sample chemical Analysis).

133 2.00 Heavy Duty clamps made from 4" x 1.5" iron strin suitable for column 282.80 Rupees Two Hundred Eighty Two And No

pipe 1.5" to 2" length. (E) 100mm (4") dia. Pipe. Paise Eighty Only

134 1.00 Supplying and erecting CI Swing check type non-return (Reflux) valve 2868.40 Rupees Two Thousand Eight Hundred No

ISI marked suitable for 100mm dia. Sixty Eight And Paise Forty Only

135 4.00 Supplying & Erecting Mild Steel heavy duty Flanges with rubber 212.10 Rupees Two Hundred Twelve And Paise No

packing and hardware materials for pipe connections suitable for (D) Ten Only

136 3.00 Supplying & erecting G.I. Bend for pipe connection suitable for (g) 548.43 Rupees Five Hundred Forty Eight And No

100 mm (4") Paise Forty Three Only

Item Quantities Item of work Estimated Estimated Rates In Words Unit Amount in Rupees

No. estimated but Rates In

may be more or Figure

137 3.00 Constructing manhole with R.C.C top slab in 1:2:4 mix (1 cement : 2 11488.75 Rupees Eleven Thousand Four Hundred No

coarse sand : 4 graded stone aggregate 20 mm nominal size) Eighty Eight And Paise Seventy Five Only

foundation concrte 1:3:6 mix (1 cement : 3 coarse sand : 6 brick bats

40 to 50 mm nominal size) inside plastering 15 mm thick with cement

mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of

neat cement slurry and making channels in cement concrte 1:2:4 mix

( 1 cement : 2 coarse sand : 4 stone aggregate 20 mm nominal size)

finished smooth complete including curing & testing (I) Inside size

mm x 1200 mm and 1.50 meter deep including SFRC cover with frame

size 560 mm diameter (A) with 230 mm thick walls of brick masonry

using bricks having crushing strength not less than 35 Kg / Sqcm in

cement mortar 1:5 (1 cement : 5 coarse sand) (1) A-type depth

meter for 300 mm diameter sewer.

138 2.00 Constructing manhole with R.C.C top slab in 1:2:4 mix (1 cement : 2 19789.94 Rupees Nineteen Thousand Seven No

coarse sand : 4 graded stone aggregate 20 mm nominal size) Hundred Eighty Nine And Paise Ninety

foundation concrte 1:3:6 mix (1 cement : 3 coarse sand : 6 brick bats Four Only

40 to 50 mm nominal size) inside plastering 15 mm thick with cement

mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of

neat cement slurry and making channels in cement concrte 1:2:4 mix

( 1 cement : 2 coarse sand : 4 stone aggregate 20 mm nominal size)

finished smooth complete including curing & testing (I) Inside size

mm x 1200 mm and 1.50 meter deep including SFRC cover with frame

size 560 mm diameter (A) with 230 mm thick walls of brick masonry

using bricks having crushing strength not less than 35 Kg / Sqcm in

cement mortar 1:5 (1 cement : 5 coarse sand) (2) B-type depth

meter for 300 mm diameter sewer.

139 1.00 Constructing manhole with R.C.C top slab in 1:2:4 mix (1 cement : 2 23900.64 Rupees Twenty Three Thousand Nine No

coarse sand : 4 graded stone aggregate 20 mm nominal size) Hundred And Paise Sixty Four Only

foundation concrte 1:3:6 mix (1 cement : 3 coarse sand : 6 brick bats

40 to 50 mm nominal size) inside plastering 15 mm thick with cement

mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of

neat cement slurry and making channels in cement concrte 1:2:4 mix

( 1 cement : 2 coarse sand : 4 stone aggregate 20 mm nominal size)

finished smooth complete including curing & testing (I) Inside size

mm x 1200 mm and 1.50 meter deep including SFRC cover with frame

size 560 mm diameter (A) with 230 mm thick walls of brick masonry

using bricks having crushing strength not less than 35 Kg / Sqcm in

cement mortar 1:5 (1 cement : 5 coarse sand) (3) C-type depth

meter for 300 mm diameter sewer.

Item Quantities Item of work Estimated Estimated Rates In Words Unit Amount in Rupees

No. estimated but Rates In

may be more or Figure

140 3.00 Extra rate for constructing B.B masonry for every additional depth 522.96 Rupees Five Hundred Twenty Two And No

0.10 meter or part thereof over item 24.27 (I) for depth from 0.90 Paise Ninety Six Only

meter to 1.50 meter.

141 2.00 Extra rate for constructing B.B masonry for every additional depth 397.19 Rupees Three Hundred Ninety Seven And No

0.10 meter or part thereof over item 24.27 (II) for depth from 1.50 Paise Nineteen Only

meter to 2.25 meter.

142 1.00 Extra rate for constructing B.B masonry for every additional depth 550.40 Rupees Five Hundred Fifty And Paise No

0.10 meter or part thereof over item 24.27 (III) for depth from 2.25 Forty Only

meter to 3.15 meter.

143 250.00 Providing and laying (To level or slopes) and jointing reinforced 665.48 Rupees Six Hundred Sixty Five And Paise Rmt

concrte heavy duty Non-pressure pipes I.S Class NP2 of the following Forty Eight Only

internal diameter with collars and butt ends prepared for collar joints

including testing of joints complete. (D) 300 mm diameter

144 250.00 Providing and laying (To level or slopes) and jointing reinforced 1060.59 Rupees One Thousand Sixty And Paise Rmt

concrte heavy duty Non-pressure pipes I.S Class NP2 of the following Fifty Nine Only

internal diameter with collars and butt ends prepared for collar joints

including testing of joints complete. (E) 450 mm diameter

145 100.00 Providing, laying and jointing in true line and level 250 diametre 2824.97 Rupees Two Thousand Eight Hundred Rmt

.P.V.C (6 kg.') with one end plain and other end socketed with rubber Twenty Four And Paise Ninety Seven Only

ring conforming to IS 13592 pipe as equivalent as approved by

Engineer in charge for drainage Pipeline, pipe shall be jointed with

each other with rubber lubricant, pipe shall be laying in trenches as

directed including necessary fittings such as bends, shoes etc.

including testing of pipes and joints and jointed with adhesive solvent

cement including cost of all materials.

146 60.00 Supplying and fixing SFRC (Steel Fiber Reinforced Concrete) M.H. 2979.50 Rupees Two Thousand Nine Hundred No

Jali / Cover of 5/10/15 MT Load capacity as per I.S. 12592 part I & II Seventy Nine And Paise Fifty Only

and size of frame and cover/jali size 3 x 2/ 2.5 x 2 Sq.ft including

loading and unloading etc. complete.

147 12.00 Charges for making holes from 300 mm to 450 mm dia in earthwork 2903.75 Rupees Two Thousand Nine Hundred Rmt

of all kind of soil by diamond core cutting machine of HILTI or Three And Paise Seventy Five Only

equivalent including disposing the debris for all lead and lift.

148 2.00 Half brick masonary in common burnt clay conventional building 599.84 Rupees Five Hundred Ninety Nine And Sq.m

bricks having crushing strength not less than 35 Kg/Sq.cm. in C.M. Paise Eighty Four Only

1:4 ( 1 cement : 4 coarse sand ) including curing etc. complete for all

floors. (Rain Water harvesting)

Item Quantities Item of work Estimated Estimated Rates In Words Unit Amount in Rupees

No. estimated but Rates In

may be more or Figure

149 17.00 Providing 15 mm thick Mala cement plaster in single coat on 157.17 Rupees One Hundred Fifty Seven And Sq.m

brick/concrete wall for interior plastering finished even and smooth Paise Seventeen Only

including scaffolding, curing and 1 cm x 1 cm grooves at junction of

structural members etc. complete. In Cement mortar 1:4(1 cement :

fine sand) for all floors.

150 36.00 Providing Graded Filter media for purpose of rain water harvesting in 1263.81 Rupees One Thousand Two Hundred Sixty Cu.m

pit around bore pipe using aggregate of size 40mm , 20mm, 10mm Three And Paise Eighty One Only

and coarse sand in layers of in thickness as per instructions of

engineer incharge.

151 400.00 Providing laying and jointing in true line and level 160 diameter P.V.C. 676.70 Rupees Six Hundred Seventy Six And Rmt

Strainer Pipe confirming to IS 13592-1992 with one end plain and Paise Seventy Only

other end socketed with rubbering, & fitting conforming to ISI 14735-

1999 of approved make for Rain water harvesting system pipe line,

pipe shall be jointed with each other with rubber lubricant, including

necessary fittings such as bends, shoes etc. including testing of pipes

and joints and jointed with adhesive solvent cement including cost of

152 280.00 Providing & laying ISI Mark G.I. Medium grade pipe size 150mm dia 3166.96 Rupees Three Thousand One Hundred Rmt

IS : 1239 / 3589 in position with all fitting including flanges, cutting, Sixty Six And Paise Ninety Six Only

beveling welding, bending, threading, erection and installation with

cleaning fixing coating with fabrication of all types of support with

erection and installation of upper ground pipeline to required level of

elevation including hook and piping with equipment.

153 200.00 Providing & laying ISI Mark G.I. Medium Grade pipe size 100 mm dia 2418.55 Rupees Two Thousand Four Hundred Rmt

IS : 1239 / 3589 in position with all fitting including flanges, cutting, Eighteen And Paise Fifty Five Only

beveling welding, bending, threading, erection and installation with

cleaning fixing coating, with fabrication of all types of support with

erection and installation of upper ground pipeline to required level of

elevation including hook and piping with equipment including

painting with red oxide and two coat red enamel paint of approved

154 200.00 Providing & laying ISI Mark G.I. Medium Grade pipe size 80 mm dia 1679.59 Rupees One Thousand Six Hundred Rmt

IS : 1239 / 3589 in position with all fitting including flanges, cutting, Seventy Nine And Paise Fifty Nine Only

beveling welding, bending, threading, erection and installation with

cleaning fixing coating, with fabrication of all types of support with

erection and installation of upper ground pipeline to required level of

elevation including hook and piping with equipment.

Item Quantities Item of work Estimated Estimated Rates In Words Unit Amount in Rupees

No. estimated but Rates In

may be more or Figure

155 100.00 Providing & laying ISI Mark G.I. Medium Grade pipe size 50 mm dia 787.40 Rupees Seven Hundred Eighty Seven And Rmt

IS : 1239 / 3589 in position with all fitting including flanges, cutting, Paise Forty Only

beveling welding, bending, threading, erection and installation with

cleaning fixing coating, with fabrication of all types of support with

erection and installation of upper ground pipeline to required level of

elevation including hook and piping with equipment.

156 160.00 Providing & laying ISI Mark G.I. Medium Grade pipe size 25 mm dia 397.87 Rupees Three Hundred Ninety Seven And Rmt

IS : 1239 / 3589 in position with all fitting including flanges, cutting, Paise Eighty Seven Only

beveling welding, bending, threading, erection and installation with

cleaning fixing coating, with fabrication of all types of support with

erection and installation of upper ground pipeline to required level of

elevation including hook and piping with equipment.

157 6.00 Providing and fixing 150 mm diameter CI sluice/butter fly valve ISI 9443.50 Rupees Nine Thousand Four Hundred No

marked with gun metal / SS working parts (DISC) with stainless steel; Forty Three And Paise Fifty Only

spindle with necessary jointing materials filling etc. complete as

158 6.00 Providing and fixing 150 mm diameter C.I double flanged non return 8080.00 Rupees Eight Thousand Eighty Only No

valve with gunmetal working parts as per IS: 5312 ISI Mark, having

cast iron body and gun metal working parts with nut-bolts, gaskets

etc.complete as required.

159 48.00 Providing and fixing 100 mm diameter CI sluice/butter fly valve ISI 7446.73 Rupees Seven Thousand Four Hundred No

marked with gun metal / SS working parts (DISC) with stainless steel; Forty Six And Paise Seventy Three Only

spindle with necessary jointing materials filling etc. complete as

160 24.00 Providing and fixing 100 mm diameter C.I double flanged non return 7070.00 Rupees Seven Thousand Seventy Only No

valve with gunmetal working parts as per IS: 5312 ISI Mark, having

cast iron body and gun metal working parts with nut-bolts, gaskets

etc.complete as Directed.

161 24.00 Providing and fixing 80 diameter CI sluice/butter fly valve ISI marked 4875.27 Rupees Four Thousand Eight Hundred No

with gun metal / SS working parts with stainless steel; spindle with Seventy Five And Paise Twenty Seven Only

necessary jointing materials filling etc. complete as directed.

162 51.00 Providing and fixing 63mm Gun metal / SS single outlet type hydrant 7498.24 Rupees Seven Thousand Four Hundred No

valve as per IS 5290 with ISI marked 75 mm inlet and 63mm female Ninety Eight And Paise Twenty Four Only

instantaneous coupling rubber washer and cast iron hand wheel

operation with close and open direction as directed.

Item Quantities Item of work Estimated Estimated Rates In Words Unit Amount in Rupees

No. estimated but Rates In

may be more or Figure

163 51.00 Providing and fixing 63mm dia Gun metal /SS branch pipe of 2222.00 Rupees Two Thousand Two Hundred No

standard length with 20mm bore hexagonal nozzle as per IS 903 with Twenty Two Only

ISI marked as directed.

164 51.00 Providing and fixing 63mm Pyroline fire hose of approved grand 17372.00 Rupees Seventeen Thousand Three No

conforming to IS 636 type B having crushing pressure of 37.20 kg/cm Hundred Seventy Two Only

2 of ISI marked of 15 mtr length fitting with necessary S.S 63mm

delivery hose coupling as IS 903 with ISI mark bided with GI/Cu. wire

etc complete directed.

165 51.00 Mild steel box hose cabinet of 18SWG of suitable size (Double shutter) 3232.00 Rupees Three Thousand Two Hundred No

with locking arrangement and 5mm thick glass panel to accommodate Thirty Two Only

1 No's of Hydrant valve, 1 No Fire hose reel 50 rmt length, 2 no of

hose pipe (15mtr) and 1 No. GM / SS branch pipe etc. painting red

colors etc. as directed. (All the fire accessories should be inside hose

166 99.00 Providing and fixing orifice plate on fire hydrant valve including 1111.00 Rupees One Thousand One Hundred No

jointing materials having suitable base for reducing the pressure Eleven Only

hydrant outlet etc as directed.

167 51.00 Providing & fixing of First Aid Hose Reel wall mounting fix type having 17372.00 Rupees Seventeen Thousand Three No

side of the hose reel made of MS providing with 35 meter long length Hundred Seventy Two Only

PVC nylon braided flexible pipe of 25 mm dia. with shut off nozzle &

Ball valve both of superior quality made out of SS-304 investment

casting of approved quality etc. complete as directed.

168 7.00 Providing and erecting 4 way / 2 Way connection of siemens 10605.00 Rupees Ten Thousand Six Hundred Five No

connection with necessary fitting at our required place of the fire Only

hydrant system as directed.

169 95.00 Providing and fixing of ABC type fire extinguishers of 6 kg/Capacity 2222.00 Rupees Two Thousand Two Hundred No

and as per IS : 15683 with ISI mark etc as directed. Twenty Two Only

170 95.00 Providing and fixing carbon dioxide (CO2) type fire ext 4.5KG capacity 5454.00 Rupees Five Thousand Four Hundred Fifty No

as per IS : 15683 with ISI mark, supplied with test certificate of Four Only

explosive Deptt. Govt. of India, Nagpur.

171 4.00 Supplying, Installing, Testing & commissioning of Modular type fire 4040.00 Rupees Four Thousand Forty Only No

extinguishers of 5 kg/Capacity with ISI mark (IS 15683 ) etc as irected

Item Quantities Item of work Estimated Estimated Rates In Words Unit Amount in Rupees

No. estimated but Rates In

may be more or Figure

172 1.00 Providing, fixing, testing & commissioning of Electrical Motor Driven 171700.00 Rupees One Lakh(s) Seventy One No

Main Pump of centrifugal horizontal end suction type with gland Thousand Seven Hundred Only

packing and capacity of 2280LPM@80Mtr Head.The pump shall be

coupled to TEFC motor of suitable HP & speed and complete set shall

mounted on common base frame . The quoted rate shall includes

providing & fixing of coupling, coupling gaurd,matching flanges for

suction & delivery side, Foundation bolts and foundation as

recommended by manufacturer etc. (Hydrant + Sprinkler Pump)

173 1.00 Providing, fixing, testing & commissioning of Electrical Motor Driven 161448.50 Rupees One Lakh(s) Sixty One Thousand No

Jockey Pump capacity of180LPM/Hour@80Mtr Head.The pump shall Four Hundred Forty Eight And Paise Fifty

be coupled to TEFC motor of suitable HP & speed and complete set Only

shall mounted on common base frame . The quoted rate shall includes

providing & fixing coupling, coupling gaurd,matching flanges for

suction & delivery side, Foundation bolts etc.

174 1.00 Supplying, Installation, Testing and commissioning of cubical type 223210.00 Rupees Two Lakh(s) Twenty Three No

floor mounted power cum control panel complete with suitable switch Thousand Two Hundred Ten Only

gear, bus bars, relays, conductors, indicating lamps, fuses,

instruments manual isolator & auxillary switch including connections

complete as required.

175 120.00 Wrapping and coating of 150 mm / 100mm MS pipe 808.00 Rupees Eight Hundred Eight Only Rmt

176 48.00 Supplying and fixing On/Off push buttons with with pipe & 4c x 1 sq. 4545.00 Rupees Four Thousand Five Hundred No

mm cable wiring on each floor etc. Forty Five Only

177 5490.00 Design, supply & installation of safety signage made of zinc base glow 2.02 Rupees Two And Paise Two Only Sq.cm

in the dark rigid sheet with high luminous with pasted on 3 mm thick

on rigid PVC foam sheet. Such as EXIT EMERGENCY EXIT. Do not

use lift in case of fire, Floor markings etc.

178 26.00 Supplying installation, Testing & Commissioning of 15 mm dia gun 757.50 Rupees Seven Hundred Fifty Seven And No

metal ISI mark gate valve with 25 mm dia nipple. Paise Fifty Only

179 100.00 Supplying of Armored Aluminum cable PVC Insulated Approved mark 353.50 Rupees Three Hundred Fifty Three And Rmt

3C x 35 sq mm cable. Paise Fifty Only

180 1.00 Supplying & Installation pressure gauge of 150 mm dia. 0-21 Kg/cm2 1818.00 Rupees One Thousand Eight Hundred No

fitted with 12/15 mm dia pad cock valve and G.I. elbow etc. complete Eighteen Only

Item Quantities Item of work Estimated Estimated Rates In Words Unit Amount in Rupees

No. estimated but Rates In

may be more or Figure

181 6.00 Supply installing Testing & Commissioning of Fire Alarm System with 60600.00 Rupees Sixty Thousand Six Hundred Only No

Manual Call Point, Hooter with flusher all at each floor and wiring set

182 2.00 Supply and installation of Gun Metal Air Release Valve with all 2828.00 Rupees Two Thousand Eight Hundred No

accessories etc. complete as required. Twenty Eight Only

183 100.00 Providing and erecting XLPE(IS:7098)(I)- 88 ISI armoured cable 252.50 Rupees Two Hundred Fifty Two And Paise Rmt

multistrand / Solid Copper conductor for 1.1 KV. to be laid on wall Fifty Only

with necessary clamps or in existing trench / pipe at road crossing or

floor of following size of cables. 4c x 1.5 sq mm

184 120.00 Providing and fixing sprinkler system in Basement / Parking as per 3030.00 Rupees Three Thousand Thirty Only No

current Prevaling Norms complete with necessary dia. pipe line

network with all sizes of pipe from 150 mm to 25 mm with 57 degree

sprinkler and Sluice valve/ Butterfly valve & drain valve with supports

of sprinkler hangers with bullets & studs of 10 mm and 12 mm

including painting the pipe line with redoxide and two coat red enamal

paint of approved brand.

185 9612.00 Application fees for fire saftey certificate approval as per building plan 15.15 Rupees Fifteen And Paise Fifteen Only Sqm

for residential building .

186 1.00 Getting Approval of Fire Hydrant and Alarm System from local fire 50500.00 Rupees Fifty Thousand Five Hundred Only Job

authority and any other relevant statutory authority at initial and

various other stages of work, including photography & videography as

per fire authority. Contractor shall include cost of all liaison work

which are not explicitly mentioned above but are mandatory to have

fire authority approval.

187 1.00 Supplying & installing completely testing & commissioning centrifugal 535300.00 Rupees Five Lakh(s) Thirty Five Thousand No

main fire pump (diesel driven)with cast iron casing & bronze or Three Hundred Only

phosphor bronze internal parts, make as approved by ISO/CFO for

fire duty, complete with coupling, coupling guard necessary base

frame, foundation bolts, RCC foundation,antivibration paid , capable

of discharging 2280 lt/min against 75 mtr. head against all losses

complete with suitable diesel engine of speed matching the pump

speed ,auto start facility with battery & battery charger, necessary

wiring, fuel tank ,exhaust system, foundation gauges & wired for

automatic start of the water pump on drop of pressure in the hydrant

and sprinkler system. The pump should confirm to LFA / SEB & and

IE Regulations. The pump shall be capable of giving not less than

150% discharge at a head not less than 65% of the rated head.

Item Quantities Item of work Estimated Estimated Rates In Words Unit Amount in Rupees

No. estimated but Rates In

may be more or Figure

188 5.00 Supplying, Installing, Testing & commissioning of Modular type 4040.00 Rupees Four Thousand Forty Only No

(Automatic) fire extinguishers of 5 kg/Capacity with ISI mark (IS

15683 ) etc as irected

189 265.00 Brick work using common burnt clay conventional building bricks 4295.99 Rupees Four Thousand Two Hundred Cu.m

having crushing strength not less than 35 Kg/sq cm. in Super Ninety Five And Paise Ninety Nine Only

structure for All floors in cement mortar 1:6 ( 1 cement : 6 fine sand )

including curing etc. complete. (Comp Wall)

190 520 Providing and fixing 0.50 meter high fencing with 0.50 meter long M 160.92 Rupees One Hundred Sixty And Paise Rmt

S Angle post 40 x 40 x 6 mm and oil painting three coats, fixed at Ninety Two Only

3.00 mtr c/c with five horizontal lines and two diagonal of galvanised

stell barbed wire weighning 9.38 kg / 100 Rmt strained and fixed to

column posts with necessary screws, fixtures etc. comp.

191 18.00 Providing and fixing of Cattle trap by excavating upto minium 1.00 11441.48 Rupees Eleven Thousand Four Hundred Sqm

mt depth and of required size incl. 20mm 1:2:4 at bottom and side Forty One And Paise Forty Eight Only

wall of 23mm thick of all four sides with plaster of 15mm, providing

20 cm thick coping with TMT bar on periphery of brick masonary,

providing 6 no. of I section of size 150mm x 75mm at bottom in

shorter span embedded in coping and put fabricated 50mm dia round

heavy galvanised pipe with MS flat framing on longer span with clear

spacing of maximum 50mm also provision of gully trap at bottom to

drain out of rain water at nearest chamber etc. completed as directed

by engineer in charge.

192 72.00 Providing 10 mm thick Mala cement plaster in single coat on 153.67 Rupees One Hundred Fifty Three And Sqm

brick/concrete wall/ceiling for interior plastering finished even and Paise Sixty Seven Only

smooth including scaffolding, curing and 1 cm x 1 cm grooves at

junction of structural members etc. complete. In Cement mortar 1:3(1

cement : 3 fine sand) for all floors. (Sump)

193 111.00 Providing 20 mm thick double coat Mala cement plaster on interior 272.48 Rupees Two Hundred Seventy Two And Sqm

brick/concrete work for plastering comprising of base coat of 12 mm Paise Forty Eight Only

thick cement plaster in Cement mortar 1 : 4 ( 1 cement : 4 coarse

sand ) in rough finishing and 8 mm thick top coat of cement mortar

: 2 ( 1 cement : 2 coarse sand ) finished with trovel including

scaffolding curing and 1 cm x 1 cm grooves at junction of structural

members etc. complete for all floors. (Sump)

194 50.00 Providing and laying in trenches galvanized mild steel tubes (medium 1152.11 Rupees One Thousand One Hundred Fifty Rmt

grade) of 100 mm dia nominal bore tube fitting. Two And Paise Eleven Only

Item Quantities Item of work Estimated Estimated Rates In Words Unit Amount in Rupees

No. estimated but Rates In

may be more or Figure

195 30.00 Providing and laying in trenches galvanized mild steel tubes (medium 919.80 Rupees Nine Hundred Nineteen And Paise Rmt

grade) of 80 mm dia nominal bore tube fitting. Eighty Only

196 60.00 Providing and fixing conceled center point to wall ceiling and floor 1427.53 Rupees One Thousand Four Hundred Rmt

CPVC( SDR 11) pipe having National Senitation Foundation (NSF) seal Twenty Seven And Paise Fifty Three Only

for potable water of following nominal dia, tube fittings and Z clamps

including making good the wall ceiling and floor etc. complete. 80 mm

197 200.00 Providing, Laying and jointing in true line and level U.P.V.C. 100mm 1128.17 Rupees One Thousand One Hundred Rmt

pipe (SCH-80) of following dia. Including fittings as approved by Twenty Eight And Paise Seventeen Only

Engineer-in-charge. Pipe shall be fixed on the wall with the help of Z

Patti at every 2000 mm center to center or shall be concealed as

directed including necessary fittings etc. including testing of pipe and

joints and fixing the same with adhesive solvent, including cost of all

198 3.00 Providing and fixing 80 diameter CI sluice/butter fly valve ISI 4876.16 Rupees Four Thousand Eight Hundred No

marked with gun metal / SS working parts with stainless steel; Seventy Six And Paise Sixteen Only

spindle with necessary jointing materials filling etc. complete as

199 3.00 Providing and fixing 80 diameter CPVC valve ISI marked with 3888.50 Rupees Three Thousand Eight Hundred No

necessary jointing materials filling etc. complete as directed. Eighty Eight And Paise Fifty Only

200 485.00 Supplying & Placing single bed of overall size 2080x965x838mm 6363.00 Rupees Six Thousand Three Hundred Nos

(Seating Height 387 mm)as per drawing and following details at site of Sixty Three Only

work as required & directed etc. complete. Seating height

mmVertical & Horizontal Structure made of 50x25x1.2mm thick. ERW

rectangular tube (CRC).Other Structure made of 25x25x1.2mm thick.

ERW square tube(CRC Head Wooden Back Support of 152x19mm

thick. Teak wood section with french polishing Wooden Leg Side

members of 90x19mm thick.teak wood section with french polishing.

Mid Panel of 18mm thick, ISI Standard ply with oil painted. Bottom

wooden legs of 38mm dia teak wood section with french polishing. All

steel parts in powder coated finish with high quality powder after

tanks anti rust tratement.

Item Quantities Item of work Estimated Estimated Rates In Words Unit Amount in Rupees

No. estimated but Rates In

may be more or Figure

201 485.00 Providing And Arranging Study Table of top made from 18 mm thick 7673.98 Rupees Seven Thousand Six Hundred Nos

All proof plywood with 1.00 mm thick laminate finish. Gable end to Seventy Three And Paise Ninety Eight

support top made from 18mm All proof Plywood both side pre Only

laminated with 2mm edge bands and Appron 18 mm thick MR grade

plywood with 1.00 mm thick laminate finish with T.W. border of

specified size with melamine polish. Drawer Unit-450 x 300 x 600 mm

having all Structure 18 mm thick All proof plywood with 1.00 thick

laminate and teakwood border of specified size with melamine polish

finish. Drawers (1 Nos) slides on Ebco make telescopic channel..

Footrest made from 18mm thick all proof plywood. The balance

laminate 0.8 mm thick to be provided on inner faces including all

materials likes Edge bands, Fevicol, Screw, nails, Dowel, Rubber

Shoe, cable manager etc. and labour etc. complete as per drawing

and instruction of engineer-in charge.

Table Laminate Size :- 900 mm x 600mm x 750mm

202 515.00 Providing and Arranging fix chair having structure of CRCA M.S. pipe 3484.50 Rupees Three Thousand Four Hundred Nos

20mm dia and 16 guage with 50 micron powder coated of approved Eighty Four And Paise Fifty Only

seat and back 40 density PU foam covered with fabric of approved

shade and texture with one year replacement warranty. Wooden

armrest to be provided as per approved design. Complete chair should

be in suitable shape including all materials and labours etc. complete

as per drawing and instruction of engineer-in charge. HOF MAKE :-

Vita 1001 Chairs, , Nilkamal, Godrej, Featherlite Make.

203 485.00 P & F Drawer Unit 450 x 350 x 600mm size with one drawer and one 4747.00 Rupees Four Thousand Seven Hundred Nos

locker. Entire construction is made from 18 mm thick plywood of Forty Seven Only

termite proof, water proof of relevant IS specification and of brand

Century, Kitply, Greenply or as approved by Engineer in charge with

0.80mm thick Lamination of brand Century, Kitply, Greenply or as

approved by Engineer in charge on both side glued with PUR adhesive

on automatic plant as described in specification sheet and fabricated

for joining with each other including all dowels and mini fix, handels,

lock, hinges, etc complete and as per instruction of Engineer in

Item Quantities Item of work Estimated Estimated Rates In Words Unit Amount in Rupees

No. estimated but Rates In

may be more or Figure

204 1179.00 Providing and supplying Full/low/medium Height Units made using 12789.63 Rupees Twelve Thousand Seven Hundred Sq.m

19 mm thick plywood (M1) for the main structure, finished externally Eighty Nine And Paise Sixty Three Only

with 1.0 mm thick decorative laminate (M24) and internally with

mm thick liner laminate (M25), all as per design and as approved by

the Architect. Storage shutters shall be made of the same ply and

laminate combination and fixed with all required hardware including

handles (M19), hinges (M18), magnets (M18), and locks (M16). The

units shall include removable ply shelves supported on both sides

with teak wood battens (M5). All exposed edges shall be finished with

8 mm thick teak wood beading patties (M4) coated with melamine

polish (M29). All hardware and fixers required for complete

installation shall be included (M14). The units shall be executed

strictly as per approved architectural drawings and as directed by the

Architect and Engineer-in-Charge. It shall be confirmed and approved

in advance by the Architect, along with a description and image, or as

directed by the Engineer-in-Charge.

205 104.00 Supplying & Placing Dining table of overall size 2300x900x730mm as 7231.60 Rupees Seven Thousand Two Hundred Smt

per drawing and following details at site of work as required & Thirty One And Paise Sixty Only

directed etc. complete.

Table Main Top of 1.60 mm thick. S.S. 304 Grade with 8 mm thick

plywood for top below side.

Top frame of 20 x 20 x 3.00 mm thick. S.S. 202 Grade S.S. angle.

Legs & Footrest of 40 x 40 x 1.20 mm thick. S.S. 202 Grade square

All S.S. parts of finished with matt finish.

206 81.00 Supplying & Placing Seating Bench of overall size 2300x350x450mm 6228.67 Rupees Six Thousand Two Hundred Smt

as per drawing and following details at site of work as required & Twenty Eight And Paise Sixty Seven Only

directed etc. complete.

Wooden Seat of 2.75" x 1.0" thick. Teak wood section with french

Legs & footrest of 40 x 40 x 1.20 mm thick. S.S. 202 grade square

All legs porvided with PVC adjustable studs.

All S.S. Parts of furnished with matt. finish.

207 20.00 M S Slotted Rack 2525.00 Rupees Two Thousand Five Hundred Nos

Providing and supplying Storage Racks for Kitchen Storage having Twenty Five Only

size - 2.00 x 0.91 x 0.40 M, made out by M.S. slotted angle of 40 x

mm (2.5 Kg/pcs) (14 SWG) with M.S. sheet (3 kg/pcs) (18 SWG) for

partitions shelves - 07 Nos (18 SWG), Shelves and depth 380mm,

including Labour, Material etc. complete or as directed by Engineer in

Item Quantities Item of work Estimated Estimated Rates In Words Unit Amount in Rupees

No. estimated but Rates In

may be more or Figure

208 2.00 Providing and fixing S.S. 5 + 1 Containers Hot Bain Marie with 3 119693.08 Rupees One Lakh(s) Nineteen Thousand Nos

Sides Closed under 1 No. Under Shelf. (Electrical Operated). Size: 87” Six Hundred Ninety Three And Paise Eight

x 27” + 12” x 34” Ht. Only

209 2.00 Supplying and placing in position Insect killer of overall size 525mm 7272.00 Rupees Seven Thousand Two Hundred Nos

(L) x 170m (W) x 215mm (H) and 230 V power of wall mounted with Seventy Two Only

glue board type with 2 Nos. of tube light each of 30 Watt etc. complete

as per referrence drawing and directed by Engineer in charge.

210 175.00 Providing and Arranging S.S Nickle Crome Plated Dustbin Having 1260.23 Rupees One Thousand Two Hundred Sixty Nos

254mm dia & 356mm Height with Perforted S.S sheet Including all And Paise Twenty Three Only

necessary Fixtures, Fasters, Labour Materail Machinary etc. Complete

as selected and directed by Engineers Incharge. Approved make :

sintex Model no SSHPB02 - 01 Dustbin Sintex make: SSHPB02 -

S.S Crome Plated

211 25.00 Providing and Supplying Wheeled waste bins of capacity 120 ltr or as 2903.75 Rupees Two Thousand Nine Hundred Nos

instructed with selected colour and using material of special UV Three And Paise Seventy Five Only

stabilized grades of polythelene etc complete as per instructed by

Engineer in Charge.

212 7.00 Providing & Supplying Office Table of size 2100mm (Length) X 11005.97 Rupees Eleven Thousand Five And Paise Smt

1050mm (Width) X 750mm (Height) with an attached side storage of Ninety Seven Only

900mm X 600mm, featuring a 25mm thick top with a 12mm

toughened glass overlay as per required size, including two drawers

and a side rack measuring 1350mm X 600mm X 750mm (Height) with

a two-drawer storage cabinet. The table is supported by teakwood legs

with 1mm thick lamination in single or double shades as directed by

the engineer-in-charge on all visible surfaces and 0.80mm white

lamination on all non-visible surfaces. The drawers and sliding

components are equipped with Hettich or equivalent make telescopic

sliding channels, Enox or equivalent make stainless steel (S.S.) sliding

rail, S.S. decorative handles, and an Ebco make keyboard tray,

including all necessary fixtures, fasteners, labor, and approvals as per

the engineer-in-charge’s instructions, ensuring a complete and high-

quality installation.

Item Quantities Item of work Estimated Estimated Rates In Words Unit Amount in Rupees

No. estimated but Rates In

may be more or Figure

213 1.00 Providing and Arranging side unit with top 37mm overall thickness 11699.84 Rupees Eleven Thousand Six Hundred Nos

made from 18 mm thick All proof plywood with 1.00 mm thick Ninety Nine And Paise Eighty Four Only

Laminate finished polish. Side and drawer made of 18mm thick MR

grade plywood with 1.00 mm thick Laminate finish and inside 0.8mm

thick balancing laminate of approved shade. Drawer run on Ebco

make telescopic channel with Godrej make lock with Two keys and

shutter fixed with auto hinges including . all necessary fixtures and

fastening as approved and back of the unit with 6mm thick MR grade

playwood with 0.8 mm thick laminate of approved shade with nylon

bullet including all materials and labour etc. Complete as per

drawing and instruction of Engineer-in charge . Side Table Laminate

Size :- 900mm x 450mm x 750mm

214 5.00 Providing and fixing Key Board pull out tray made out of high quality 1382.19 Rupees One Thousand Three Hundred Nos

foil pressed on pre-laminated MDF with side mouse pad tray having Eighty Two And Paise Nineteen Only

height adjustment on mounting brackets with smooth sliding

operation and with removable drawer with latches having load

carrying capacity of 12.00 kg incl. all necessary fixtures, fasteneres

labour and material as diretced by Engineer-in-charge. EBCO MAKE

Key Board Tray (705 x 284 mm size)

215 5.00 Providing and fixing Telescopic CPU stand made from M.S slim stores 677.15 Rupees Six Hundred Seventy Seven And Nos

CPU under the table with soft anti vibration pads and adjustment Paise Fifteen Only

width of 45mm to 100 mm having height adjustment from 310mm to

530 mm and safe load carrying capacity of 20.00 kg finished with

powder coating of 50 micron thickness incl. all necessary fixtures

fasteneres , labour and material as diretced by Engineer-in-

charge.EBCO MAKE CPU Trolley.

216 20.00 Providing and fixing post formed Work Top with mounter and made 5027.62 Rupees Five Thousand Twenty Seven And Smt

from 36mm MDF board with overall size 1200/ 1500 / 1800 X Paise Sixty Two Only

750mm as per requirements. etc. complete or as directed by engineer

217 13.00 Providing and fixing Gable end made from 25mm pre laminated 3030.77 Rupees Three Thousand Thirty And Paise Smt

boards laminated on both sides to support top having overall size 600 Seventy Seven Only

X 710 X 25mm etc. complete or as directed by engineer in charge.

218 21.00 Providing and fixing modesty panel of 600 mm high connecting Gable 2073.18 Rupees Two Thousand Seventy Three And rmt

end and partition made from 18mm BSL boards. etc. complete or as Paise Eighteen Only

directed by engineer in charge.

Item Quantities Item of work Estimated Estimated Rates In Words Unit Amount in Rupees

No. estimated but Rates In

may be more or Figure

219 3.00 Providing and Arranging High Back Chair having Seat & back 28863.28 Rupees Twenty Eight Thousand Eight Nos

cushioned on ply, aluminum die casted arms with cushioned pad, Hundred Sixty Three And Paise Twenty

synchro mechanism with multi position locking system , gas lift, Eight Only

chrome base.Including all materials and labour etc.Complete as per

drawing and instruction of engineer-in charge. Size : max.1290 mm

,Min. 1180 mm,Seat : 510mm x 530mm , Back : 790mm x 540mm

HOF : MARCO 1001, Nilkamal, Godrej, Featherlite Make High back

220 5.00 Providind and Arranging Medium Back Chair - Seat & back 16493.30 Rupees Sixteen Thousand Four Hundred Nos

cushioned on ply, aluminum die casted arms with cushioned pad, Ninety Three And Paise Thirty Only

Synchro mechanism with single back lock , gas lift , chrome

base.Including all materials and labour etc.complete as per detail

drawing and instruction of engineer-in charge.Size : max.Height

1070mm, Min.970mm,Seat: 490mm x 510 mm, Back : 640 mm x

510 mm HOF : MARCO 1002, Nilkamal, Godrej, Featherlite Make

Meduim back Chairs.

221 5.00 Providing and Arranging Cushioned Seat & back, PP outer back cover, 7085.15 Rupees Seven Thousand Eighty Five And Nos

PP arms, Single back lock, Push back mechanism, gas lift for seat Paise Fifteen Only

height adjustment, five prong Nylon base with twin wheel nylon

castor.Including all materials and labour etc.Complete as per drawing

and instruction of engineer-in charge.Size : Max.Hight 1020mm

Min.Height 930 mm,Seat : 500mm x 460mm , Back: 500mm x

mm Low Back Chair : HOF - Priviya-7003, Nilkamal, Godrej,

Featherlite Make Low back chair.

222 4.00 Providing and supplying Centre Table / Corner Table / Tipoi with 14192.52 Rupees Fourteen Thousand One Hundred Sq.m

Glass Top, made with 19mm thick plywood (M1) structure, finished Ninety Two And Paise Fifty Two Only

with 1.0 mm thick decorative laminate sheet (M24) as specified and

approved by the Architect, and fixed with necessary fixtures and

fastening (Hardware) (M14). The table shall rest on four solid wooden

legs of size 50mm x 50mm made from C.P. teakwood (M5). A 50mm x

50mm wooden frame shall be provided at the top for support. Over

this frame, a 75mm wide plywood patta (M1) shall be fixed on all

sides, finished with approved melamine polish (M29). The patta shall

have a 2 mm wide groove to securely hold an 8 mm thick toughened

glass top (M27) with polished edges. Internal MS support bars and a

center stiffener shall be provided as per drawing for structural

stability. Table size shall be 950 mm (L) x 500 mm (W) x 450 mm (H).

Complete as per Architect’s drawing and as per instructions of the

Architect & Engineer-in-Charge.

Item Quantities Item of work Estimated Estimated Rates In Words Unit Amount in Rupees

No. estimated but Rates In

may be more or Figure

223 28.10 Providing and supplying Reading Table with Partition made using Kiln- 11920.02 Rupees Eleven Thousand Nine Hundred Sq.m

dried & treated fine quality C.P. Teakwood (M5) frame structure. The Twenty And Paise Two Only

tabletop and partition panels shall be constructed from 19mm thick

plywood (M1), finished with 1.0 mm thick decorative laminate (M24)

as per the approved shade. A soft board shall be fixed on 19mm thick

plywood partition to serve as a pin-up board on both sides, as shown

in the drawing.

The tabletop structure shall be supported by a 50mm x 50mm

teakwood frame, along with 50mm x 50mm solid teakwood legs,

including all necessary fixtures and fastening hardware (M14). The

table shall also include internal cross bracing for structural stability,

All exposed edges, including the top and partitions, shall be finished

with teakwood beading patti (M4) and coated with approved enamel

Complete in all respects as per the architectural drawings and the

instructions of the Architect & Engineer in charge.

Reading Table Unit Size: 200 cm (L) x 120 cm (W) x 90 cm (H)

Partition Height Above Table: 45 cm

224 4.00 Sofa - 3 Seater ( 1950 x 700 x 800 mm ) : 27097.29 Rupees Twenty Seven Thousand Ninety Nos

Providing three seater sofa with Indian teak wood member with Seven And Paise Twenty Nine Only

finished size and shape shall be as per drawing. Quality of teak wood

shall be conforming to IS specification. All members shall be joined as

per design in line level and perpendicular to each other. There shall be

mortice and tenon joints in wood work. At every joint each member

shall be joined each other by means of good quality adhesive and

screws of required size and numbers. Each member shall be flushed

with other member as per drawing and after finishing it shall be of

size same as given in drawing. All exposed Indian teak wood member

shall be polioshed with three coats of melamine polish after staining

in approved shade of specific tint complete as per instruction.Good

quality 12 mm thk. ply of required size as per drawing should be

fixed above frame with necessary tools, tackles , adhesive, screws,

nails as directed by architect.Seat and back cushion made from heigh

density M-foam, of approved make with seat of 150 mm thkl.and back

of 100 mm thk. of required size as per drawing, cover it with selected

tapestry on top.

Item Quantities Item of work Estimated Estimated Rates In Words Unit Amount in Rupees

No. estimated but Rates In

may be more or Figure

225 3.00 Sofa -2 Seater ( 1450 x 700 x 750 mm ) : 18418.36 Rupees Eighteen Thousand Four Hundred Nos

Providing Two seater sofa with Indian teak wood member with finished Eighteen And Paise Thirty Six Only

size and shape shall be as per drawing. Quality of teak wood shall be

conforming to IS specification. All members shall be joined as per

design in line level and perpendicular to each other. There shall be

mortice and tenon joints in wood work. At every joint each member

shall be joined each other by means of good quality adhesive and

screws of required size and numbers. Each member shall be flushed

with other member as per drawing and after finishing it shall be of

size same as given in drawing. All exposed Indian teak wood member

shall be polioshed with three coats of melamine polish after staining

in approved shade of specific tint complete as per instruction.Good

quality 12 mm thk. ply of required size as per drawing should be

fixed above frame with necessary tools, tackles , adhesive, screws,

nails as directed by architect.Seat and back cushion made from heigh

density M-foam, of approved make with seat of 150 mm thkl.and back

of 100 mm thk. of required size as per drawing, cover it with selected

tapestry on top.

226 3.00 Sofa 1 seater:900x700 mm 13988.50 Rupees Thirteen Thousand Nine Hundred Nos

Providing One seater sofa with Indian teak wood member with finished Eighty Eight And Paise Fifty Only

size and shape shall be as per drawing. Quality of teak wood shall be

conforming to IS specification. All members shall be joined as per

design in line level and perpendicular to each other. There shall be

mortice and tenon joints in wood work. At every joint each member

shall be joined each other by means of good quality adhesive and

screws of required size and numbers. Each member shall be flushed

with other member as per drawing and after finishing it shall be of

size same as given in drawing. All exposed Indian teak wood member

shall be polioshed with three coats of melamine polish after staining

in approved shade of specific tint complete as per instruction.Good

quality 12 mm thk. ply of required size as per drawing should be

fixed above frame with necessary tools, tackles , adhesive, screws,

nails as directed by architect.Seat and back cushion made from heigh

density M-foam, of approved make with seat of 150 mm thkl.and back

of 100 mm thk. of required size as per drawing, cover it with selected

tapestry on top.

Item Quantities Item of work Estimated Estimated Rates In Words Unit Amount in Rupees

No. estimated but Rates In

may be more or Figure

227 94.00 Providing and fixing 600 x 600 mm gypsum silhouette grid False 1372.89 Rupees One Thousand Three Hundred Sq.m

Ceiling M/F Suspended ceiling, which includes Gypsteel ULTRA™ Seventy Two And Paise Eighty Nine Only

CRP surface ribbed perimeter channels (having one flange of 20mm

and another flange of 30mm and a web of 27mm) along the perimeter

of ceiling, screw fixed to brick wall/partition with the help of nylon

sleeves and screws, at 610mm centres. Then suspending Gypsteel

ULTRA™ CRP surface ribbed intermediate channels of size 45mm

(with two flanges of 15mm each) from the soffit at 1220mm centres

with Gypsteel ULTRA™ CRP surface ribbed ceiling angle of width

25mmx10mm fixed to soffit with GI cleat and steel expansion

fasteners(Mfg by Saint Gobain Gyproc). Then Gypsteel ULTRA™ CRP

surface ribbed Ceiling section of having web of 51.5mm and two

flanges of 26mm each with lips of 10.5mm are then fixed to the

Gypsteel ULTRA™ intermediate channel with the help of connecting

clip and in direction perpendicular to the Gypsteel intermediate™

channel at 457.5mm centres.

228 5.00 Providing and supplying soft board/pin up board of size 3228.97 Rupees Three Thousand Two Hundred Nos

900x1200mm fixed on work station/table covered with good quality Twenty Eight And Paise Ninety Seven Only

fabric fixed with SS studs on corners etc directed by the Architect and

approved by the Engineer in Charge.

229 1.00 Providing and supplying Notice board - white surface with decorative 3600.65 Rupees Three Thousand Six Hundred And Nos

alluminium boarder with 2 - way hanging options having size of 2540 Paise Sixty Five Only

(L) x 1320 (W) complete with all necessary fixtures and accessories as

directed by the Enginerr in Charge.

230 1.00 Providing and supplying Notice board having size of 1800 (L) x 900 8389.06 Rupees Eight Thousand Three Hundred Nos

(W) x 125 mm Depth made out of 18 mm thick BWP plywood, 12 mm Eighty Nine And Paise Six Only

thick soft board, superior quality fabric with 4 mm thick glass sliding

door with locking facility and necessary fixtures and fasteners with

coats of melamine polishing etc. complete a sper drawing and as

directed by Engineer in Charge.

231 5.00 Providing and supplying key board of required size made out of 18 3943.04 Rupees Three Thousand Nine Hundred Nos

and 12 mm thick BWP plywood with 4 mm thick glass shutter with Forty Three And Paise Four Only

hooks for keys, locking facility and necessary fixtures and fasteners

with coats of melamine polishing etc. complete a sper drawing and as

directed by Engineer in Charge.

Item Quantities Item of work Estimated Estimated Rates In Words Unit Amount in Rupees

No. estimated but Rates In

may be more or Figure

232 10.00 Providing and placing flower pots shall have a total height ranging 753.46 Rupees Seven Hundred Fifty Three And Nos

from 0.7 m to 0.9 m, including the pot. The design and material shall Paise Forty Six Only

be durable and suitable for indoor or outdoor decoration. The

placement and quantity shall be as per the requirements of the site or

as directed by the engineer in charge.

233 44.00 Providing and Fixing Impulse Blackout Roller Blinds with fabric of 2033.13 Rupees Two Thousand Thirty Three And Sq.m

0.53mm thickness and Top channel of non-rusting aluminium alloy Paise Thirteen Only

with 1.25mm thickness and bottom channel of 1.50mm thickness &

21mm diameter. Tilt channel of ABS plastic with 1.50mm polyster

cord with 4.50mm balls with stop lock arrangement including all

necessary fixture, fastners, fittings, labour material machinary etc

complete as seletced and diretced by Engineer Incharge. Approved

Make: MARVEL/ideal/vista - Roller Blinds

234 5.00 Providing and Supplying Cargo Storage cabinet with nylon castors as 7746.70 Rupees Seven Thousand Seven Hundred Nos

specified below: Forty Six And Paise Seventy Only

Size : 900 x 480 x 1980 mm Ht.

Structure : Frame type construction framing with more rigidity in base

using CRCA steel 20-22 swg with 70-80 micron powder coating,

shelves 04 nos. forming 05 compartments and 04 nos. nylon castors

Cupboard / Almirah with proper locking arrangement, handels,

castors as per specified in detail drawing etc. complete as approved

and directed by the Engineer in Charge.

Item Quantities Item of work Estimated Estimated Rates In Words Unit Amount in Rupees

No. estimated but Rates In

may be more or Figure

235 20.00 Providing and supplying Full Height Storage Unit of size 1200 mm (W) 8916.28 Rupees Eight Thousand Nine Hundred Sqm

x 450 mm (D) x 2100 mm (H), made using 19 mm thick plywood (M1) Sixteen And Paise Twenty Eight Only

for the main structure, externally finished with 1.0 mm thick

decorative laminate (M24) and internally with 0.8 mm thick liner

laminate (M25), all as specified and approved by the Architect. The

shutters, made from matching plywood and laminate, shall be fitted

with 6 mm thick glass panels, and provided with all necessary

hardware including handles (M19), hinges (M18), magnets (M18), and

locks (M16). All fittings and fixtures shall be of approved make and

include hardware (M14). The unit shall incorporate removable

plywood shelves, supported on both sides with teak wood battens

(M5). All exposed edges shall be finished with 8 mm thick teak wood

beading patties (M4) polished with melamine finish (M29). The entire

assembly shall be executed in accordance with the approved

architectural drawings and as directed by the Architect and Engineer-

in-Charge. It shall be confirmed and approved in advance by the

Architect, along with a description and image, or as directed by the

Engineer-in-Charge.ved and directed by the Engineer in Charge.

236 500.00 Providing and fixing S.S. (304 Grade) plate of size 250 x 25 x 2 mm 122.21 Rupees One Hundred Twenty Two And Nos

with 5 hooks (Khinti) incl. all required material & labour etc. complete Paise Twenty One Only

as directed by Engineer in charge.

237 3.00 Providing and fixing Magazine and News Paper Display Rack of made 5555.00 Rupees Five Thousand Five Hundred Fifty Nos

of Wooden / Metal with 5 compartments of required size and with Five Only

castor for easy movement as instructed by Engineer in Charge etc.

complete. For all floor

238 33.00 Providing and fixing Modular Partition full or low height or more with 3918.10 Rupees Three Thousand Nine Hundred Sq.m

whole frame structure of Aluminium extruded alloy sections with all Eighteen And Paise Ten Only

sections powder coated (50 micron) having overall partition thickness

80 mm (double skin) flush on both sides, with no screwing or gluing

etc. visible. Panels should be 18 mm thick one side and 12mm thick

other side All proof plywood both side with 1mm laminatation sheet.

All work is carried out as per Instruction of Engineer in charge.

239 18.00 Providing and fixing side screen of size 0.6 x 0.4 m or as per 3227.23 Rupees Three Thousand Two Hundred Sq.m

instruction of Engineer in Charge made from 12mm Glass mounted Twenty Seven And Paise Twenty Three

thorough D brackets. Only

Item Quantities Item of work Estimated Estimated Rates In Words Unit Amount in Rupees

No. estimated but Rates In

may be more or Figure

240 21.00 Providing and Fixing Cupboard of Any width & height as per Drawing 8331.49 Rupees Eight Thousand Three Hundred Sq.m

or as per instruction of Architech office including side wall , top , Thirty One And Paise Forty Nine Only

Bottom & internal Shelves of 18 mm ply wood , 12 mm plywood on

back side of cupboard, shutter of 18 mm thick plywood of approved

quality, two / Three nos of drawers with premium quality telescopic

channel as per instruction , including 2 mm thick edge band around

the shutter and other required location,including laminating the total

internal area (Sides,back,shelves (Top/Bottom) etc.) & back side of

cupboard, back side of shutter with white lamination sheet and

Outer both side,top,front side of cupboard with decorative lamination

sheet of Durian or equivalent brand including other necessary fixture

& fastening as per instruction of engineer in charge.

241 18.00 Providing and fixing modular readymade assemble type 17004.08 Rupees Seventeen Thousand Four And Sq.m

cupboard/Drawer under kitchen platform with vertical panels of L/B Paise Eight Only

0.65/0.60, 0.75/0.60 & Horizontal panels of L/B 0.45/0.60 and of

required length and height as per Architect design / site situation

having Front of laminated exterior garde I 19 mm thick marine ply

coated with 1 mm thick laminated sheet and Bottom & Sides of

exterior garde I 12 mm thick marine ply coated with 0.8 mm thick

laminated sheet, including soft closing concealed hinges having cup

diameter 35mm, cup depth 12.8mm of the make hettich/ozone, one

S.S tall unit with pullout system having loading capacity 30 kg, one

S.S basket forcutlery, one S.S basket for cup saucer, one S.S basket

for thali & one S.S basket for general purpose all S.S basket of the

make Hettich/ Enox/ Ozone with soft closing channel of the

make Hettich / Ozone as approved by Engineer in charge with

lightly brushed stainless steel finish alluminium J profile Handle

& other miscellaneous hardware including all transporatation,

loading, unloading, labour etc. complete inclusive of all taxes, etc.

complete as directed by Engineer in Charge.

242 1.00 Providing, Supplying, Transporting and Placing Standard Tournament 35350.00 Rupees Thirty Five Thousand Three Nos

Type Table Tennis Table (2740 mm × 1525 mm × 760 mm) of STIGA Hundred Fifty Only

Club Roller,GKI Euro 25,Stag Iconic International or equivelant brand

with foldable frame, wheels, net and post set complete, including

loading, unloading and all incidental charges as directed by Engineer-

Total (A) (Civil) :-

Item Quantities Item of work Estimated Estimated Rates In Words Unit Amount in Rupees

No. estimated but Rates In

may be more or Figure

243 1861.00 Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 611.91 Rupees Six Hundred Eleven And Paise Pt.

sq.mm (Green) both are of ISI marked 1.1 kV grade FRLSH PVC Ninety One Only

insulated multi strand copper wires up to 10 mtr length , in below

type of pipe erected with 6A Modular type switch / bell push &

accessories and earth continuity of following type, erected on PVC /

Metallic/Wooden box, single mounting base frame covered with

textured/metallic/white front plate modules erected on / in wall /

ceiling as per pipe erected, with necessary Lamp holder/ceiling rose /

H.D.Connector as directed.(f) with medium class Rigid PVC pipe and

accessories erected concealed in wall/ceiling complete Cat. III (5%

Added for FRLSH WIre/Cable)

243A 401.00 Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm 849.46 Rupees Eight Hundred Forty Nine And Pt.

(Green) both are of .ISI marked 1.1 kV Grade FRLSH PVC insulated Paise Forty Six Only

multi strand copper wires up to 10 mtr length, in below type of pipe

erected with 6A Modular type switch and hum free EME step type

electronic fan regulator mounted and accessories with earth

continuity of following type erected on PVC / Metallic/Wooden box,

single mounting base frame covered with textured/metallic/white

front plate modules erected on / in wall / ceiling as per pipe erected.

with necessary ceiling rose / H.D.Connector as directed.(f) with

medium class Rigid PVC pipe and accessories erected concealed in

wall/ceiling complete Cat. III

244 1398.00 Point wiring for on board Looped Plug with 6A Modular type switch & 324.51 Rupees Three Hundred Twenty Four And Pt.

5 pin socket erected on PVC / Metallic/Wooden box, single mounting Paise Fifty One Only

base frame covered with textured / metallic/white front plate

modules erected on / in wall / ceiling with following type accessories

Cat. III (5% Added for FRLSH WIre/Cable)

245 7.00 Providing following type of Modular Type Accessories mounted with 160.59 Rupees One Hundred Sixty And Paise Fifty Ea.

PVC / metallic/Wooden box, single mounting base frame covered with Nine Only

textured / metallic/white front plate , modules erected with necessary

connections as per site situation directed by Engineer In charge.(3)

Two Pin/RJ-11 Telephone Socket, [A] For One Gang Cat.III

246 2.00 (4) TV Co-axial Socket outlet , Cat.III 160.59 Rupees One Hundred Sixty And Paise Fifty Ea.

247 652.00 (7) Blank Plate Single Cat.III 25.25 Rupees Twenty Five And Paise Twenty Five Ea.

248 24.00 (8) Computer RJ-45 socket , Cat.III 160.59 Rupees One Hundred Sixty And Paise Fifty Ea.

Item Quantities Item of work Estimated Estimated Rates In Words Unit Amount in Rupees

No. estimated but Rates In

may be more or Figure

249 87.00 (9) 16 Amp. SP one way switch, Cat.III 180.79 Rupees One Hundred Eighty And Paise Ea.

Seventy Nine Only

250 87.00 (10) 6/16Amp. Universal socket , Cat.III 199.98 Rupees One Hundred Ninety Nine And Ea.

Paise Ninety Eight Only

251 3.00 (19) Modular Indicating Call Bell , Cat III 329.26 Rupees Three Hundred Twenty Nine And Ea.

Paise Twenty Six Only

252 525.00 Providing and erecting ISI mark Medium class RIGID PVC PIPES of 24.24 Rupees Twenty Four And Paise Twenty Mtr.

following size complete to be erected on/in wall or ceiling erected with Four Only

necessary PVC fittings & Junction boxes fixed with adhesive solution

& Clamps with following dia of pipes, in approved manner as directed

253 13.13 Providing & erecting PVC Corrugated Flexible Conduit with required 17.17 Rupees Seventeen And Paise Seventeen Mtr.

nos. of coupling, PVC bushes, Check-nuts etc. complete of following Only

sizes.(1) 20 mm

254 161.00 Supplying and laying UPVC cable trunking system comprising 188.87 Rupees One Hundred Eighty Eight And Mtr

unplasticised polyvinyl, chloride rigid material with ignition free and Paise Eighty Seven Only

flame proof confirming BS with necessary end caps Internal and

external bend, flat bends, coupler, tee etc..All necessary accessories

and measuring of following sizes (3) 50 mm x 50 mm trunking

255 8961.00 Providing and erecting Mains with 1.1 KV grade FRLSH PVC insulated 109.23 Rupees One Hundred Nine And Paise Mtr.

ISI marked stranded Copper conductor wire in following type of pipe Twenty Three Only

to be erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm

copper conductor FRLSH PVC insulated stranded wire of green colour

for earth continuity of following size , (A) with medium class Rigid PVC

pipe and accessories, (b) 2 wire 2.5 sq. mm (5% Added for FRLSH

256 2290.00 Providing and erecting Mains with 1.1 KV grade FRLSH PVC insulaed 147.41 Rupees One Hundred Forty Seven And Mtr.

ISI marked stranded Copper conductor wire in following type of pipe Paise Forty One Only

to be erected in / on wall / ceiling with 2.5 sq. mm copper conductor

FRLSH PVC insulated stranded wire of green colour for earth

continuity of following size (A) with medium class Rigid PVC pipe and

accessories (a) 2 wire 4 sq. mm (5% Added for FRLSH WIre/Cable)

257 675.00 (b) 2 wire 6 sq. mm (5% Added for FRLSH WIre/Cable) 194.07 Rupees One Hundred Ninety Four And Mtr.

Paise Seven Only

Item Quantities Item of work Estimated Estimated Rates In Words Unit Amount in Rupees

No. estimated but Rates In

may be more or Figure

258 625.00 (g) 4 wire 4 sq. mm (5% Added for FRLSH WIre/Cable) 237.55 Rupees Two Hundred Thirty Seven And Mtr.

Paise Fifty Five Only

259 126.00 Providing and erecting Mains with ISI marked, 1.5KV grade electrolyte 47.47 Rupees Forty Seven And Paise Forty Seven Mtr.

multi stranded, annealed copper conductor with heat resistant PVC Only

insulated conforms to IS 694, IEC - 227 erected in existing pipe of

following size (Specifically for control panel, relays, power switchgears,

motor starters & control wiring) with required size of copper lugs, nuts

and bolts if required.(d) One wire 4.00 sq. mm

260 50.00 (f) One wire 10.00 sq. mm 115.14 Rupees One Hundred Fifteen And Paise Mtr.

261 8.00 (h) One wire 25.00 sq. mm 295.93 Rupees Two Hundred Ninety Five And Mtr.

Paise Ninety Three Only

262 8.00 (k) One wire 70.00 sq. mm 837.29 Rupees Eight Hundred Thirty Seven And Mtr.

Paise Twenty Nine Only

263 700.67 Supplying and erecting Flexible PVC insulated multi strand multi core 58.58 Rupees Fifty Eight And Paise Fifty Eight Mtr.

1.1 kv grade ISI marked copper wires of following size to be erected as Only

directed.(e) 1.50 Sq.mm 3 core round PVC sheathed

264 50.00 Providing & Erecting approved make following size of TV Co-axial 24.24 Rupees Twenty Four And Paise Twenty Mtr.

flexible cable comprising inner conductor of solid bare copper Four Only

insulated with Foam PE & Secondary conductor made of poly -

Aluminium film bonded Al. Braids @ suitable coverage overall

sheathed with black PVC insulation.(a) RG

265 100.00 Supplying & erecting approved make Telephone Cable electrolytic 21.21 Rupees Twenty One And Paise Twenty One Mtr.

copper conductor PE insulation twisted in two pairs, & wrapped with Only

FRLSH PVC tape & sheathed with FRLSH PVC or HFFR outer Jacket

suitable for telephone wiring & confirming to C-DOT erected in

existing pipe. of following size of conductors & nos.of pairs. With

necessary connections.[A] Conductor Size 0.5 mm (a) Unarmoured (2)

Two Pairs (5% Added for FRLSH WIre/Cable)

266 425.00 Supplying & erecting approved make LAN cable of following size in 47.47 Rupees Forty Seven And Paise Forty Seven Mtr

existing pipe as per direction, [E] CAT - 6 Only

Item Quantities Item of work Estimated Estimated Rates In Words Unit Amount in Rupees

No. estimated but Rates In

may be more or Figure

267 4.00 Providing & erecting Switch board for Computer or electric 1133.22 Rupees One Thousand One Hundred Ea.

apparatus consisting of following modular type accessories mounted Thirty Three And Paise Twenty Two Only

with PVC / Metallic concealed/open box with single mounting base

frame covered with textured/metallic /white front plate,modules

erected with necessary connections as directed 1 no. 6A/16A

universal plug-switch combined. 3 nos. 6A Switch 3 nos. 6A 5 pin

Plug For Modular Type Accessories Cat. III

268 487.00 Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 165.64 Rupees One Hundred Sixty Five And Paise Ea.

Watt to 0.5 Watt assembled on single MCPCB, with housing used as Sixty Four Only

a heat sink shall be made of thick sheet Steel conforming to IS:

513/CRCA/ aluminium die cast powder coated and high U.V. &

corrosion resistance with diffuser with company mark/name 160V to

270V, Power Factor more than 0.95, THD < 15%,CCT 3000 K to

6500K, Luminaire efficacy> 85 lumens/watt ,LED LED driver

efficiency > 85 %( fitting required LM-79 & LM-80 Certificates) (NOTE:

Below description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage capacity

between the ranges shown.)(A) Tube Light with integral driver(i) 5-10

Watts, Surge-2 kV, IP-20, conventional 1 to 2 feet Cat-lll

269 94.00 Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 373.70 Rupees Three Hundred Seventy Three And Ea.

Watt to 0.5 Watt assembled on single MCPCB, with housing used as Paise Seventy Only

a heat sink shall be made of thick sheet Steel conforming to IS:

513/CRCA/ aluminium die cast powder coated and high U.V. &

corrosion resistance with diffuser with company mark/name 160V to

270V, Power Factor more than 0.95, THD < 15%,CCT 3000 K to

6500K, Luminaire efficacy> 85 lumens/watt ,LED LED driver

efficiency > 85 %( fitting required LM-79 & LM-80 Certificates) (NOTE:

Below description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage capacity

between the ranges shown.)(A) Tube Light with integral driver (iv) 22-

24 Watts, Surge - 2KV,IP-20, conventional 4 feet Cat. III

Item Quantities Item of work Estimated Estimated Rates In Words Unit Amount in Rupees

No. estimated but Rates In

may be more or Figure

270 328.00 Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 755.48 Rupees Seven Hundred Fifty Five And Ea.

Watt to 0.5 Watt assembled on single MCPCB , with housing used as Paise Forty Eight Only

a heat sink shall be made of thick sheet Steel conforming to IS:

513/CRCA/ aluminium die cast powder coated and high U.V. &

corrosion resistance with diffuser with company mark/name LED

batten with Microwave motion technology in which occupancy within

5m radius & 120° angle to the sensor, the luminaire works at 100% of

defined output specification and if no occupancy detected within

specified range, the luminaire stays at occupancy mode for the first

180 to 300 seconds and then luminaire will be turn OFF and

providing an energy-efficient solution which has specifications: 160V

to 270V, Power Factor >/= 0.90, THD </=15%, CCT 3000 to 6500 K,

CRI >/=80, Luminaire efficacy> 130 lumens/watt , and Average life

L70B50: 50000 hours (A) Tube Light with integral driver (iv) 20 Watts,

Surge - 2KV,IP-20, conventional 1150 to 1200mm, Cat-lll

271 400.00 Supplying and erecting led lamps with following wattage capacity of 112.11 Rupees One Hundred Twelve And Paise Ea.

220 to 240 voltage, minimum 15000 burning hours life, 500 V in built- Eleven Only

surge protection,Polycarbonate diffuser, mounting suitable for E14 /

E27 / B22 lamp holders, pf >= 0.5(A) LED Lamps integral type, with

PC diffuser suitable LAMP holder (ii) 5 to 8 watts Cat. III

272 4.00 Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 427.23 Rupees Four Hundred Twenty Seven And Ea.

Watt to 0.5 Watt assembled on single MCPCB, with housing used as Paise Twenty Three Only

a heat sink shall be made of thick sheet Steel conforming to IS:

513/CRCA/aluminium pressure die cast powder coated and high

U.V. & corrosion resistance with diffuser housed in aluminium

casted body with company mark/name 160V to 270V,Power Factor

more than 0.95, THD < 15 %, CCT 3000 K to 6500K, Luminaire

efficacy> 85 lumens/watt , LED driver efficiency > 85 % ( fitting

required LM-79 & LM-80 Certificates)(NOTE: Below description have

shown ranges of Wattage capacity of LED fittings.The Engineer

incharge may select any wattage capacity between the ranges

shown.)(A) Square/ Circular shaped Surface/Recessed Mount

Downlight with provision for spring loaded mounting clips

complete.IP20 (ii) 11-15 watts, Surge-2 KV Cat-lll

Item Quantities Item of work Estimated Estimated Rates In Words Unit Amount in Rupees

No. estimated but Rates In

may be more or Figure

273 385.00 Supplying and erecting Dimmable LED indoor fittings with LEDs of 766.59 Rupees Seven Hundred Sixty Six And Ea.

wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with Paise Fifty Nine Only

housing made from polycarbonate with polycarbonate diffuser with

company mark/name 160V to 270V,Power Factor more than 0.95,

THD < 20 %, CCT 3000 K to 6000K,Luminaire efficacy>

lumens/watt, LED driver efficiency > 85 %,Beam angle options >120 (

fitting required LM-79 & LM-80 Certificates) Motion Sensor with

years warranty agaist manufacturing defect :- having Sensing time

after 15-30Sec, detection area 4-6 mtr, Max Mounting Height up to

meter and Detaction area 4-6 meter.(NOTE: Below description have

shown ranges of Wattage capacity of LED fittings.The Engineer

incharge may select any wattage capacity between the ranges shown.)

(A) Square/ Circular shaped Surface/Recessed Mount Downlight with

provision for spring loaded mounting clips complete.IP20, 15W & 4W

dimming mode 4KV Surge Cat.III

274 4.00 Supplying and erecting Dimmable LED street light / Flood light 2988.59 Rupees Two Thousand Nine Hundred Ea.

fittings with High power White LEDs wattage of 1 Watt and above Eighty Eight And Paise Fifty Nine Only

assembled on single MCPCB, efficiency more than 100 lm/w and

corrosion free High pressure die cast aluminum housing with smooth

finish powder coated and heat sink extruded aluminium with diffuser

and Polycarbonate optics/ lenses, with Polycarbonate/toughened

glass with company mark/name engraved or embossed, 160 to

V,Power Factor more than 0.95, THD < 10 %, CCT 3000 K to

5700K,Uniformity ratio >0.45, Luminaire efficacy> 100 lumens/watt .

LED driver efficiency > 85 %.( fittings required LM-79 & LM-80

certificates) Programable Motion Sensor with 3 years warrantyagaist

manufacturing defect :-High Frequency DC Dimmable type sensor,

having Adjustable Hold time 1Min to 20 Mins, Adjustable detection

area 100% to 40%, Stand by period 0 Sec to Infinity, Orientation

Lighting 10% to 50%, Max Mounting Height up to 15 meter and

Detaction area 14-meter.Agency has to provide a programing device to

the Engineer incharge against the total supply quantity.(A) Street

Light (IP-65), Surge protection -4KV integral and ,Light must have to

sustain upto 440VAC line supply with over-voltage protection. (A)

30Watt Dimmable LED street light Fitting

Item Quantities Item of work Estimated Estimated Rates In Words Unit Amount in Rupees

No. estimated but Rates In

may be more or Figure

275 48.00 Supplying and erecting Dimmable LED street light / Flood light 3766.29 Rupees Three Thousand Seven Hundred Ea.

fittings with High power White LEDs wattage of 1 Watt and above Sixty Six And Paise Twenty Nine Only

assembled on single MCPCB, efficiency more than 100 lm/w and

corrosion free High pressure die cast aluminum housing with smooth

finish powder coated and heat sink extruded aluminium with diffuser

and Polycarbonate optics/ lenses, with Polycarbonate/toughened

glass with company mark/name engraved or embossed, 160 to

V,Power Factor more than 0.95, THD < 10 %, CCT 3000 K to

5700K,Uniformity ratio >0.45, Luminaire efficacy> 100 lumens/watt .

LED driver efficiency > 85 %.( fittings required LM-79 & LM-80

certificates) Programable Motion Sensor with 3 years warrantyagaist

manufacturing defect :-High Frequency DC Dimmable type sensor,

having Adjustable Hold time 1Min to 20 Mins, Adjustable detection

area 100% to 40%, Stand by period 0 Sec to Infinity, Orientation

Lighting 10% to 50%, Max Mounting Height up to 15 meter and

Detaction area 14-meter.Agency has to provide a programing device to

the Engineer incharge against the total supply quantity.(A) Street

Light (IP-65), Surge protection -4KV integral and ,Light must have to

sustain upto 440VAC line supply with over-voltage protection.(B)

45Watt Dimmable LED street light Fitting

276 21.00 Providing and erecting Approved make Four pole moulded case circuit 6790.23 Rupees Six Thousand Seven Hundred Ea.

breaker having breaking capacity ICU of 25 KA. at 415 V,having Ninety And Paise Twenty Three Only

normal current rating up to 25 A to 100A. with Fixed thermal &

magnetic release suitable to work on A.C. supply 50 c/s. with all

internal connections, spreader tinned copper & complete erected in

existing 16 G.M.S. housing. ICS=100% of ICU only Cat III

277 7.00 Providing and erecting Approved make Four pole moulded case circuit 8861.74 Rupees Eight Thousand Eight Hundred Ea.

breaker having breaking capacity ICU of 35 KA. at 415 V. having Sixty One And Paise Seventy Four Only

normal current rating 125A. with Fixed thermal & magnetic release

suitable to work on A.C.supply 50 Hz. with all internal connections,

spreader tinned copper & complete erected in existing 16 G.M.S.

housing. ICS=100% of ICU only Cat III

278 4.00 Providing and erecting Approved make Four pole moulded case circuit 23041.13 Rupees Twenty Three Thousand Forty One Ea.

breaker having breaking capacity ICU of 35 KA. and above at 415 V . And Paise Thirteen Only

having normal current rating 250A. with variable thermal & magnetic

release suitable to work on A.C.supply 50 Hz. with all internal

connections, spreader tinned copper & complete erected in existing

G.M.S. housing. ICS=100% of ICU only Cat III

Item Quantities Item of work Estimated Estimated Rates In Words Unit Amount in Rupees

No. estimated but Rates In

may be more or Figure

279 4.00 Providing and erecting Approved make Four pole moulded case circuit 27751.77 Rupees Twenty Seven Thousand Seven Ea.

breaker having breaking capacity ICU of 50 KA and above at 415 V Hundred Fifty One And Paise Seventy

having Normal current rating 400A. with variable Thermal & Seven Only

magnetic release suitable to work on A.C.supply 50 Hz. With all

internal connections, spreader tinned copper & complete erected in

existing 16 G.M.S. housing ICS=100% of ICU only Cat III

280 5.00 Providing and erecting Approved make Earth fault Relay suitable to 5482.28 Rupees Five Thousand Four Hundred Ea.

mount with inter connection suitable to following size of moulded Eighty Two And Paise Twenty Eight Only

case circuit breaker having CT ratio & MCCB rating as following

along with shunt trip 220V AC. with all internal connections &

complete erected in existing M.S.housing.(2) 125 A -200 A , CT Ratio

281 1.00 Providing and erecting Approved make Earth fault Relay suitable to 5956.98 Rupees Five Thousand Nine Hundred Fifty Ea.

mount with inter connection suitable to following size of moulded Six And Paise Ninety Eight Only

case circuit breaker having CT ratio & MCCB rating as following

along with shunt trip 220V AC. with all internal connections &

complete erected in existing M.S.housing.(3) 250 A -400 A , CT Ratio

282 32.00 Providing and erecting following additional parts for panel mounting 961.52 Rupees Nine Hundred Sixty One And Paise Ea.

MCCBs (A)Extended operating rotary handle with pad lock with three Fifty Two Only

position trip,off,on suitable for 25A to 250 A panel mounting cat-III

283 4.00 Providing and erecting following additional parts for panel mounting 1442.28 Rupees One Thousand Four Hundred Ea.

MCCBs (B)Extended operating rotary handle with pad lock with three Forty Two And Paise Twenty Eight Only

position trip,off,on suitable for 400A to 630 A panel mounting cat-III

284 1.00 Supplying & erecting approved make Four Pole 415V change over 22255.35 Rupees Twenty Two Thousand Two Ea.

switch interior for panel mounting with operating mechanism A.C.23 Hundred Fifty Five And Paise Thirty Five

duty confirming to IS for (F)400A Cat-lll Only

285 8.00 Supplying and erecting triple pole & neutral 440V/ 500V panel 660.54 Rupees Six Hundred Sixty And Paise Fifty Rn.Mtr

mounting Aluminium Busbars with four equal Nos. of bus having Four Only

current density not more than 0.8 Amp. / sq.mm (Rated current /

cross section area) duly wrapped with colour insulating tape for phase

sequence of following current carrying capacity, erected with

necessary bus bar supports /insulators, main cable socket to each

busbar,erected in existing cubical panel with necessary

connections.(A) Suitable for 100 Amp. Capacity

Item Quantities Item of work Estimated Estimated Rates In Words Unit Amount in Rupees

No. estimated but Rates In

may be more or Figure

286 5.70 Supplying and erecting triple pole & neutral 440V/ 500V panel 1469.55 Rupees One Thousand Four Hundred Rn.Mtr

mounting Aluminium Busbars with four equal Nos. of bus having Sixty Nine And Paise Fifty Five Only

current density not more than 0.8 Amp. / sq.mm (Rated current /

cross section area) duly wrapped with colour insulating tape for phase

sequence of following current carrying capacity, erected with

necessary bus bar supports /insulators, main cable socket to each

busbar,erected in existing cubical panel with necessary

connections.(C) Suitable for 300 Amp. Capacity

287 2.00 Supplying and erecting triple pole & neutral 440V/ 500V panel 2204.83 Rupees Two Thousand Two Hundred Four Rn.Mtr

mounting Aluminium Busbars with four equal Nos. of bus having And Paise Eighty Three Only

current density not more than 0.8 Amp. / sq.mm (Rated current /

cross section area) duly wrapped with colour insulating tape for phase

sequence of following current carrying capacity, erected with

necessary bus bar supports /insulators, main cable socket to each

busbar,erected in existing cubical panel with necessary

connections.(D) Suitable for 400 Amp. Capacity

288 52.00 Providing and erecting Miniature circuit breaker single pole 0.5A to 2A 297.95 Rupees Two Hundred Ninety Seven And Ea.

system and having breaking capacity 10 KA to be erected in existing Paise Ninety Five Only

box. confirming to IS 8828/1996 with ISI Mark Cat.III

289 622.00 Providing and erecting Miniature circuit breaker single pole 6A to 25A 123.22 Rupees One Hundred Twenty Three And Ea.

suitable to operate on 240 V A.C. system and having breaking Paise Twenty Two Only

capacity 10 KA to be erected in existing box. confirming to IS

8828/1996 with ISI Mark Cat.III

290 67.00 Providing & erecting 240 V MCB double pole switch for motor & 329.26 Rupees Three Hundred Twenty Nine And Ea.

inductive load (C Curve) having 10 KA breaking capacity & confirms Paise Twenty Six Only

to IS : 8828 in existing box having following capacity (A) 6 to

291 32.00 Providing & erecting 415 V MCB Four Pole for Motor & Inductive 736.29 Rupees Seven Hundred Thirty Six And Ea.

Load (C Curve) having 10KA breaking capacity & confirms to IS :8828 Paise Twenty Nine Only

in existing box having following capacity (b)40 Amp. Cat.III

292 10.00 Providing & erecting 415 V MCB Four Pole for Motor & Inductive 811.03 Rupees Eight Hundred Eleven And Paise Ea.

Load (C Curve) having 10KA breaking capacity & confirms to IS :8828 Three Only

in existing box having following capacity ©63 Amp. Cat.III

293 3.00 Providing and erecting Sheet Steel powder coated MCB distribution 885.77 Rupees Eight Hundred Eighty Five And Ea.

board - flush / surface mounted fitted with busbar, neutral link, earth Paise Seventy Seven Only

bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 &

without MCB to house appropriate nos. of MCBs.(The DBs should be

used of same company of MCB to be used) suitable for (A) single

phase incoming and horizontal single phase outgoing (b) sheet steel

double door (IP-43) (ii)6 way

Item Quantities Item of work Estimated Estimated Rates In Words Unit Amount in Rupees

No. estimated but Rates In

may be more or Figure

294 20.00 (A) single phase incoming and horizontal single phase outgoing (b) 1492.78 Rupees One Thousand Four Hundred Ea.

sheet steel double door (IP-43) (iv)12 way Ninety Two And Paise Seventy Eight Only

295 23.00 (B) three phase incoming and single phase horizontal type outgoing 2913.85 Rupees Two Thousand Nine Hundred Ea.

Per phase isolation type (PPI) (b) sheet steel double door, (ii)6 way Thirteen And Paise Eighty Five Only

296 89.00 Providing and erecting Approved make RCCBs conforming to IS: 2166.45 Rupees Two Thousand One Hundred Sixty Ea.

12640 and having sensitivity of 30 mA and Short Circuit withstand Six And Paise Forty Five Only

capacity of 10 KA and suitable for operation on single phase

V,50Hz. having characteristic of quick action & tripping with all

advance feature & do not incorporate any electronic component. for

following Max. rating erected as directed (i) 25 Amps.DP Cat. III

297 4.00 Providing and erecting Approved make RCCBs conforming to IS: 2825.98 Rupees Two Thousand Eight Hundred Ea.

12640 and having sensitivity of 30 mA and Short Circuit withstand Twenty Five And Paise Ninety Eight Only

capacity of 10 KA and suitable for operation on 3 phase and neutral

415V,50Hz. having characteristic of quick action & tripping with all

advance feature & do not incorporate any electronic component for

following Max. rating erected as directed.(i) 25 Amps.FP Cat. III

298 7.00 Providing and erecting metallic vitrified danger notice board as per 69.69 Rupees Sixty Nine And Paise Sixty Nine Ea.

language suggested by engineer incharge for MEDIUM VOLTAGE Only

installation to be erected as per IS-2551.

299 60.00 Providing and erecting Annealed bare Copper wire 4.064mm to 794.87 Rupees Seven Hundred Ninety Four And Kg.

1.626mm. Paise Eighty Seven Only

300 25.00 Providing and erecting Pipe type earthing having 150 cms.long and 368.65 Rupees Three Hundred Sixty Eight And Ea.

2.5 cms. dia. galvanised iron pipe with coupling and buch buried in Paise Sixty Five Only

specially prepared earth pit complete with necessary 8 SWG earth

301 25.00 For using salt and charcoal / coke as required for pipe type earthing. 171.70 Rupees One Hundred Seventy One And Ea.

Paise Seventy Only

Item Quantities Item of work Estimated Estimated Rates In Words Unit Amount in Rupees

No. estimated but Rates In

may be more or Figure

302 6.00 Supplying & erecting earth pit of minimum bore dia.150mm size 4591.46 Rupees Four Thousand Five Hundred Ea.

approved make Earthing Electrode consisting Pipe-in-Pipe Technology Ninety One And Paise Forty Six Only

as per IS 3043-1987 made of corrosion free hot dipped G.I.Pipes

having Outer pipe dia of 50mm having 80-200 Micron galvanising,

Inner pipe dia of 25 mm having 200-250 Micron galvanising,

connection terminal dia of 12mm with constant ohmic value

surrounded by highly conductive compound with high charge

dissipation suitable for following type of applications with chamber

and heavy duty cover. (A)(approved make OEM has to submit test

certificate including value of earth resistance of installation duly

stamped and signed by agency and officer Incharge has to ensure the

value of earthing resistane mentioned in test Certificate) & having

back filling compound of (B) Inner chemical (CCM Compound)-

Resistivity:- 0.2 ohm / meter testing as per IEC 62561-2017, Voltage

drop:- < 1 volt at no load & dry form, Sulphar content:- <2%(C) Back

fill Compound :- Earthing compound should be capable to retain

moisture for long time Necessary test report must be submitted by

Agency. (a) For Electrical Installation up to 440V in normal soil

Length of pipe - 1 Mtr Back filling compound - 1 Nos Bag of 15 Kg.

303 14.55 Providing & erecting weather proof, dust & vermin proof, floor 14902.55 Rupees Fourteen Thousand Nine Hundred Sq.Mtr

mounted front operated outdoor type double door cubical panel board Two And Paise Fifty Five Only

necessary IP-54 and above protection as per approval from engineer

incharge made from 14 SWG thick CRC M.S. sheet for outer body &

doors, 16 SWG thick CRC M.S.sheet for internal partitions with

necessary accesories , supporting angles/ flats channel including

cutting, bending, drilling, welding, riveting with internal partitions &

cable alley as per requirements & instruction of engineer-in-charge

with erection of supplied switch gears, BUSBARS, suitable size of

inter connecting PVC copper wire / copper-aluminium strips, rubber

grommets, rib, bakelite control fuses/MCB for measuring

instruments, earth bus & earth bolts, foundation flange - bolts-base

Plates, sufficient nos. of hinged doors, handles with locking

arrangement and rubber gasket,heavy duty end terminal

connection,danger notice board,necessary ventilation,earthing strip

complete. The Panel shall be painted with epoxy powder coating. (The

rates excludes the cost of switchgears, bus bars, inter connecting

mains & Copper Aluminium strips, meters, Fuses etc. The dimension

shall be measured excluding base beams) The panel shall be supplied

with following approved manufacturers with following size.(B) The

standard companies switch gear shall be used and only

manufacturers at CPRI approved factory (i) with 350mm depth

Item Quantities Item of work Estimated Estimated Rates In Words Unit Amount in Rupees

No. estimated but Rates In

may be more or Figure

304 175.00 Providing , erecting , fabricating the M.S. structure as per requirement 77.77 Rupees Seventy Seven And Paise Seventy Kg.

on site incorporating proper size of M.S. angles,square,round, flats, Seven Only

bars, channels, sections complete with cutting, welding, grinding &

finishing duly painted with one coat of red oxide with erection on site

as per direction of engineer in charge with necessary grouting,

cementing, plastering & finishing complete.

305 287.00 Providing and erecting FRLSH-XLPE(IS:7098)(I)-88 ISI armoured cable 477.23 Rupees Four Hundred Seventy Seven And Mtr.

multistrand Aluminium conductor for 1.1 kV. to be laid on wall with Paise Twenty Three Only

necessary clamps or in existing trench / pipe of following size of

cables (D) 3 1/2 core 70 Sq. mm ( 35 Sq. mm 1/2 core) (5% Added

for FRLSH WIre/Cable) (5% Added for FRLSH WIre/Cable)

306 125.00 Providing and erecting FRLSH-XLPE(IS:7098)(I)-88 ISI armoured cable 680.84 Rupees Six Hundred Eighty And Paise Mtr.

multistrand Aluminium conductor for 1.1 kV. to be laid on wall with Eighty Four Only

necessary clamps or in existing trench / pipe of following size of

cables (F) 3 1/2 core 120 Sq. mm ( 70 Sq. mm 1/2 core) (5% Added

for FRLSH WIre/Cable) (5% Added for FRLSH WIre/Cable)

307 300.00 Providing and erecting FRLSH-XLPE(IS:7098)(I)-88 ISI armoured cable 920.51 Rupees Nine Hundred Twenty And Paise Mtr.

multistrand Aluminium conductor for 1.1 kV. to be laid on wall with Fifty One Only

necessary clamps or in existing trench / pipe of following size of

cables (G) 3 1/2 core 150 Sq. mm ( 70 Sq. mm 1/2 core) (5% Added

for FRLSH WIre/Cable)

308 580.00 Providing and erecting FRLSH-XLPE (IS:7098)(I)-88 ISI armoured 159.08 Rupees One Hundred Fifty Nine And Paise Mtr.

cable multistrand / Solid Aluminium conductor for 1.1 kV. to be laid Eight Only

on wall with necessary clamps or in existing trench / pipe of following

size of cables (B) 4 core 6 Sq. mm (5% Added for FRLSH WIre/Cable)

309 225.00 Providing and erecting FRLSH-XLPE (IS:7098)(I)-88 ISI armoured 240.73 Rupees Two Hundred Forty And Paise Mtr.

cable multistrand Aluminium conductor for 1.1 kV. to be laid on wall Seventy Three Only

with necessary clamps or in existing trench / pipe of following size of

cables(B) 4 core 25 Sq. mm (5% Added for FRLSH WIre/Cable)

310 910.00 Making trench in soft soil of suitable width of 90 cm deep for laying 55.55 Rupees Fifty Five And Paise Fifty Five Only Mtr.

cable or locating the fault all over the run and back filling the same

and making the surface as normal ground.

311 40.00 Providing & laying. R.C.C. Hume pipe for cable to be laid 90 cm. below 343.40 Rupees Three Hundred Forty Three And Mtr.

ground across the road crossing or on floor with necessary material in Paise Forty Only

an approved manner and making the ground as per original. (C)

Item Quantities Item of work Estimated Estimated Rates In Words Unit Amount in Rupees

No. estimated but Rates In

may be more or Figure

312 740.00 Providing & laying approved make Double walled corrugated pipes 62.62 Rupees Sixty Two And Paise Sixty Two Mtr.

(DWC) of polyethylene(conforming to IS 14930 II )with necessary Only

connecting accessories of same material at required depth in existing

trench for laying of cable. below ground / road surface for enclosing

cable (A)50 mm outer dia

313 300.00 Providing & laying approved make Double walled corrugated pipes 95.95 Rupees Ninety Five And Paise Ninety Five Mtr.

(DWC) of polyethylene(conforming to IS 14930 II )with necessary Only

connecting accessories of same material at required depth in existing

trench for laying of cable. below ground / road surface for enclosing

cable (C))90 mm outer dia

314 50.00 Providing and, fixing heavy duty flange type brass cable gland with 38.38 Rupees Thirty Eight And Paise Thirty Ea.

rubber ring for PVC insulated armoured cable complete with out going Eight Only

tails, insulating tape etc for following size of cables.(B) 2 to 4 core

315 4.00 Providing and, fixing heavy duty flange type brass cable gland with 51.51 Rupees Fifty One And Paise Fifty One Only Ea.

rubber ring for PVC insulated armoured cable complete with out going

tails, insulating tape etc for following size of cables.(E) 2 to 4 core

316 16.00 Providing and, fixing heavy duty flange type brass double compression 103.02 Rupees One Hundred Three And Paise Ea.

type cable gland with rubber ring for PVC insulated armoured cable Two Only

complete with out going tails, insulating tape etc for following size of

cables. (C) 3 & 1/2 core 70 Sq. mm

317 2.00 Providing and, fixing heavy duty flange type brass double compression 140.39 Rupees One Hundred Forty And Paise Ea.

type cable gland with rubber ring for PVC insulated armoured cable Thirty Nine Only

complete with out going tails, insulating tape etc for following size of

cables. (E) 3 & 1/2 core 120 Sq. mm

318 4.00 Providing and, fixing heavy duty flange type brass double compression 190.89 Rupees One Hundred Ninety And Paise Ea.

type cable gland with rubber ring for PVC insulated armoured cable Eighty Nine Only

complete with out going tails, insulating tape etc for following size of

cables. (F) 3 & 1/2 core 150 Sq. mm

319 200.00 Solder less crimping type Aluminium lugs conforming to IS suitable 6.06 Rupees Six And Paise Six Only Ea.

for cable of following size evenly crimped with high pressure tool &

connected to switchgear terminals with brass/cadmium plated nut

bolts in an approved manner. (A) 1.5/ 2.5/4/6 Sq.mm

Item Quantities Item of work Estimated Estimated Rates In Words Unit Amount in Rupees

No. estimated but Rates In

may be more or Figure

320 16.00 Solder less crimping type Aluminium lugs conforming to IS suitable 15.15 Rupees Fifteen And Paise Fifteen Only Ea.

for cable of following size evenly crimped with high pressure tool &

connected to switchgear terminals with brass/cadmium plated nut

bolts in an approved manner. (C) 16/25 Sq.mm.

321 14.00 Solder less crimping type Aluminium lugs conforming to IS suitable 20.20 Rupees Twenty And Paise Twenty Only Ea.

for cable of following size evenly crimped with high pressure tool &

connected to switchgear terminals with brass/cadmium plated nut

bolts in an approved manner. (D) 35/50 Sq.mm.

322 54.00 Solder less crimping type Aluminium lugs conforming to IS suitable 25.25 Rupees Twenty Five And Paise Twenty Five Ea.

for cable of following size evenly crimped with high pressure tool & Only

connected to switchgear terminals with brass/cadmium plated nut

bolts in an approved manner. (E) 70 Sq.mm.

323 6.00 Solder less crimping type Aluminium lugs conforming to IS suitable 45.45 Rupees Forty Five And Paise Forty Five Ea.

for cable of following size evenly crimped with high pressure tool & Only

connected to switchgear terminals with brass/cadmium plated nut

bolts in an approved manner. (G) 120 Sq.mm.

324 12.00 Solder less crimping type Aluminium lugs conforming to IS suitable 61.61 Rupees Sixty One And Paise Sixty One Ea.

for cable of following size evenly crimped with high pressure tool & Only

connected to switchgear terminals with brass/cadmium plated nut

bolts in an approved manner. (H) 150 Sq.mm.

325 401.00 Supply, Installation, Testing and Commissioning of suitable sweep, 2629.03 Rupees Two Thousand Six Hundred Ea.

BEE 5 Star rated, Ceiling fan with Brush Less Direct Current (BLDC) Twenty Nine And Paise Three Only

permanent ferrite magnet Motor, class of insulation: B, Rust free

nos.Aluminium blades, 2 nos. canopies, shackle kit with earthing

provision, copper winding, Power factor not < 0.9, Service Value

(CMM/W) minimum 6.85, Air delivery minimum 215 CMM,

RPM,230v (tolerance as per IS : 374-2019), THD < 10%, compitible

with electronic regulator unit for Speed Control and all remaining

accessories including safety pin, nut bolts, washers, temperature rise

= 75 degree C (Max.), suitable for 140 to 285 Voltage and rectifier

circuit with surge, over current and overload protection , 50 Hz, Single

phase AC Supply, earthing etc. Complete as required.[ Make shall be

approved by Engineer in Charge] (A) 1200 mm Sweep (48")

Item Quantities Item of work Estimated Estimated Rates In Words Unit Amount in Rupees

No. estimated but Rates In

may be more or Figure

326 240.60 Supplying and erecting 19 / 20 mm. nominal bore Medium Class M.S. 108.07 Rupees One Hundred Eight And Paise Mtr.

Pipe down rod erected duly painted for fan complete with proper Seven Only

insulation without leakage and earthing.

327 401.00 Supplying & erecting fan hook box of 10 mm M.S. round bar 108.07 Rupees One Hundred Eight And Paise Ea.

bounded to the RCC bars up to 50mm length each side and pierced Seven Only

through a 16 Gauge M.S. box / Heavy Duty PVC box complete erected

concealed in Ceiling with necessary finishing.

328 108.00 Supplying & erecting approved make low noise decorative exhaust fan 1366.53 Rupees One Thousand Three Hundred Ea.

having square frame ABS body with inbuilt lowers & square Sixty Six And Paise Fifty Three Only

frame.200mm with 1350RPM Cat.II

329 52.00 Supplying & erecting single phase approved make industrial exhaust 2054.34 Rupees Two Thousand Fifty Four And Ea

fan suitable for medium duty ring mounted low noise operation Paise Thirty Four Only

suitable for medium duty having following dia size and maximum

speed in RPM [A] 300-305 mm dia 900 RPM Cat.II

330 25.00 Supplying and erecting approved make Octagonal pole made from HR 7561.87 Rupees Seven Thousand Five Hundred Ea.

sheet steel. The pole should be made as per IS. and shall be coated Sixty One And Paise Eighty Seven Only

with hot dip galvanizing as per IS 2629/2633/4759, suitable suspend

local wind speed with integral Junction box consist of terminal plate

of min 6mm Hylam sheet, standard profile 35mmX7.5mm Din-Rail for

MCB Mounting, stud type terminal and arrangement for cable

termination to be erected With Suitable foundation (Included) as per

details given by manufacturer considering site requirement.(C) 5 Mtr.

Long 70 mm Top X 130 mm bottom dia, 3 mm thickness with

200mmX200mmX12mm base plate, 4-M16 Bolts and 600mm long

with necessary G.I. J Bolts .Approx Pole weight 46 kg

331 2.00 Supplying and erecting Street light pole bracket comprising main B 491.87 Rupees Four Hundred Ninety One And Ea

Class GI pipe of 4.2 cm/require outside dia. complete with suitable B Paise Eighty Seven Only

Class G.I. sleeve tubing of approx. 45cms.length and suitable for

76.5mm/80mm/require size of pole top having nuts and bolts for

fixing the brackets and having spread of 0.5 mtr. Length with

deg.with vertical plane and suitable welded stiffener reducer and

nipple with check nut complete painted with one coat.of Red oxide /

PU base primer and two coats of Aluminium / PU paint. paint with

following nos of arms.[A] Single Arm bracket 0.5 Mtr

Item Quantities Item of work Estimated Estimated Rates In Words Unit Amount in Rupees

No. estimated but Rates In

may be more or Figure

332 23.00 Supplying and erecting Street light pole bracket comprising main B 622.16 Rupees Six Hundred Twenty Two And Ea

Class GI pipe of 4.2 cm/require outside dia. complete with suitable B Paise Sixteen Only

Class G.I. sleeve tubing of approx. 45cms.length and suitable for

76.5mm/80mm/require size of pole top having nuts and bolts for

fixing the brackets and having spread of 0.5 mtr. Length with

deg.with vertical plane and suitable welded stiffener reducer and

nipple with check nut complete painted with one coat.of Red oxide /

PU base primer and two coats of Aluminium / PU paint. paint with

following nos of arms.[B] Double Arm Bracket 0.5 Mtr

333 1.00 Supplying & erecting approved make Digital time switch having 3168.37 Rupees Three Thousand One Hundred Ea.

lithium cell 6 years operative and operate battery backup 1 channel Sixty Eight And Paise Thirty Seven Only

day clock with 14 memory programme, suitable to operate on 240V +

5%, 16A with, floating contacts Minimum switching setup time

minimum & LCD display. Also comprised permanent ON/OFF

switching. Programming switches & housed in fire proof thermoplastic

enclosure & transparent cover erected as required with necessary

connection erected as directed.

334 1.00 Supplying & erecting power contactor ,AC3 duty for time switch 857.49 Rupees Eight Hundred Fifty Seven And Ea

complete erected as per direction Cat III (C) 4 pole 440V 16 Amp. Paise Forty Nine Only

335 12.00 Providing & Erecting full SS Body (SS 304) Split type water cooler 67226.61 Rupees Sixty Seven Thousand Two Ea.

having storage capacity 160 to 175 Ltr.(Tank SS 304) & Cooling Hundred Twenty Six And Paise Sixty One

capacity 150 ltr. Per hour @ an ambient temp of 350 C.The outlet Only

temp. of the water should drop by 150C within a hour,The water

cooler should be comprising of hermetically sealed Reciprocating

compressor with R134A, fan motor, Copper Condensing unit with

company fabricated Outdoor Unit water tank surrounded by

evaporating coil, thermostats, relay etc.complete with necessary

copper tube & Insulation, M.S Chanel Stand with Painting for water

tank & M.S. Powder Coated Stand for Outdoor unit with Installation.

With DPELCB and 4 Way DB Box with accessory Three core Cord for

Item Quantities Item of work Estimated Estimated Rates In Words Unit Amount in Rupees

No. estimated but Rates In

may be more or Figure

336 4.00 Supplying & erecting reverse osmosis (RO) water purification system 175895.54 Rupees One Lakh(s) Seventy Five Ea.

with M.S. powder coated pedestal frame, prefilter housing carbon filter Thousand Eight Hundred Ninety Five And

suitable buster DC pump, auto low & high pressure switches with Paise Fifty Four Only

following size of LPH capacity & erected as directed[F] 500 LPH with

3 phase Raw water pump of 1000LPH @ 3.0 kg/cm2 (1No - Kirloskar

/CRI /Lubi), Dual media filter 13"x54" - (1No), Micron catridge filter

20" x 4.0"-1No, High pressure pump 1000LPH @ 11kg/cm2 - (1No -

lubi/ Shimge/ CRI), RO Membrane housing with RO membrane of

40*40 - (2 Nos), RO pressure tube 4" x 2E -(1No), 0-2400 LPH

Rotameter ( 2Nos), , Dosing pump 0 -6 LPH - (1 No),. with 100 Ltr

Dosing tank - (1 No), with Recovery Rate 50%.

337 7.00 Supplying and erecting approved make panel mounting type Digital 1275.63 Rupees One Thousand Two Hundred Ea.

Voltmeter having 3 digits LED display, 0 to 750 AC Volts range Seventy Five And Paise Sixty Three Only

erected on existing panel board with all connection, wiring etc .with

manufacturers calibration certificate.

338 7.00 Supplying and erecting approved make panel mounting type Digital 1558.43 Rupees One Thousand Five Hundred Fifty Ea.

Ammeter having 3 digits LED display, external CT operated, Eight And Paise Forty Three Only

calibrated for 0 to 1000 Amps suitable to operate on 500 Volt AC

erected on existing panel board with all connection, wiring etc .with

manufacturers calibration certificate.

339 14.00 Supplying and erecting Ammeter / Voltmeter selector switch for 3 317.14 Rupees Three Hundred Seventeen And Ea.

phase AC Supply 500 V on existing panel board with necessary Paise Fourteen Only

340 21.00 Providing & erecting L.T. Current Transformer with bar primary 50/5 274.72 Rupees Two Hundred Seventy Four And Ea.

to 1000/5 ratio 15 VA burden erected in existing CRCA box duly Paise Seventy Two Only

secured with insulating materials connected to the meter

341 21.00 Supplying and erecting approved make suitable panel indicator LED 43.43 Rupees Forty Three And Paise Forty Three Ea.

type lamp, lens cover, complete erected with necessary connections. Only

342 1.00 Supplying & erecting approved make Automatic liquid level controller 2355.32 Rupees Two Thousand Three Hundred Ea.

6A. with sensor testing as per instruction of Engineer in charge on site Fifty Five And Paise Thirty Two Only

complete with wiring connection with existing wires , with copper

conductor from pump to upper and lower tank.

Item Quantities Item of work Estimated Estimated Rates In Words Unit Amount in Rupees

No. estimated but Rates In

may be more or Figure

343 1.00 Supplying and erecting Fully Automatic hydro pneumatic booster 607328.15 Rupees Six Lakh(s) Seven Thousand Three Ea.

system with cast iron housing Enclosure class IP44 minimum , with Hundred Twenty Eight And Paise Fifteen

built in PTO motor protection and stainless steel impeller pump, Only

pump model Wilo WMP 3Helix V 1006 PC-SV or GRUNDFOS Hydro

multi B 3*CR 10-6 A-FJ-A-V-HQQV or equivalent two pump working

and one standby for support with following specifications: i) Motor

data:- Power 2.2 kw/3 HP,3 Phase motor standard IEC, motor

efficiency class IE3, IP55, Insulation class F ii) Flow rate -10 CMH at

48 mtr head iii) Pump data:-stainless steel body& Impeller,Stages &

Impellers 6,Verticle Pump orientation & Maximum working pressure -

16 bar or 16 kg iv) GI inlet and outlet header size 50/100 mm with

NRV,,Pressure switch ,pressure transmission, pressure

gauge,footvalve & other required accessories with necessary Plumbing

work of suction and delivery pipe which includes all required size of

pipes, Joints valves, Bypass valve, labor all accessories required for

installation of pressure pump ( Foundation work and base stand cost

included) along with Panel HMI PLC with one VFD, Power and control

contactors with necessary Power and control switchgears, wires and

cables. Control panel should be made from Wilo, Grundfos or

authorized service distributor only.

344 1.00 Supplying & erecting approved make 3 phase motor control cubical 23821.86 Rupees Twenty Three Thousand Eight Ea.

panel ( Star - Delta) made from16 G. CRCA sheet duly painted with Hundred Twenty One And Paise Eighty Six

epoxy powder painted inside and outside with hinged doors and Only

locking arrangement, consisting of suitable size of ON- OFF isolator

(AC - 3/23 duty) main fuses, single phasing preventer cum water

level. Guard (Complete unit), Toggle switch to by pass Single phase

preventer cum WLG, indicating lamps for R- Y- B phases, over load

relay, Automatic water level controller, Ammeter & Voltmeter each

with two way selector switch incoming wires duly socket Crimped,

Panel to be erected on angle iron frame grouted on wall as directed.

Star Delta & main contactor, overload relay, thermal / Electronic Star

delta cutoff timer, start - stop push buttons. The isolator overload

relay & contactors of L& T, Siemens or Cuttler Hamer make only.

Panel to be erected on angle iron frame ground on wall. (F) S/D up

345 1.00 S.I.T.C. submersible pump set for bore of 200 mm. dia. or more 92900.81 Rupees Ninety Two Thousand Nine Ea.

having 3 phase motor capacity about 30 H.P. and discharge capacity Hundred And Paise Eighty One Only

having. Lifting and Lowering taken extra.(A) ( 12 Stage) 650 to

L.P.M. discharge at the head 120 to 190 mtrs. suitable for 80 mm dia.

delivery pipe.Cat.III

Item Quantities Item of work Estimated Estimated Rates In Words Unit Amount in Rupees

No. estimated but Rates In

may be more or Figure

346 1.00 Lowering of submersible motor pump set at the depth of following 2996.67 Rupees Two Thousand Nine Hundred Per Job

,complete with required. Nos. and size of casing pipes erected by Ninety Six And Paise Sixty Seven Only

means of proper chain pulley block & pipe wrenches after checking of

threads of each pipe with coupling to take the load of the pump set

and pipe assembly filled up with water (C)Above 120 mtr.

347 50.00 Providing and erecting ISI marked PVC insulated PVC Sheathed Flat 146.45 Rupees One Hundred Forty Six And Paise Mtr.

flexible Submersible copper cable approved make of following Size.(C) Forty Five Only

3 Core x 4 Sq. mm

348 187.73 Providing and erecting ISI marked PVC insulated PVC Sheathed Flat 488.84 Rupees Four Hundred Eighty Eight And Mtr.

flexible Submersible copper cable approved make of following Size. Paise Eighty Four Only

(F) 3 Core x 16 Sq. mm.

349 150.00 Supplying of following size of HEAVY UPVC column pipe with coupler 698.92 Rupees Six Hundred Ninety Eight And RMT.

and wire lock [D] 80 mm dia Paise Ninety Two Only

350 1.00 Supply of following size of TOP & BOTTOM accessories i.e. Adaptor set 2681.55 Rupees Two Thousand Six Hundred Per Set

(CI) long, pump guard set, starter pipe Rubber ring for submersible Eighty One And Paise Fifty Five Only

pump & UPVC column pipe as directed by Engineer - in - charge with

necessary plumbing as desired.[F] 80 mm dia

351 8.00 SITC of Vertical Air Termination Solid aluminium with Base- 10 mm 9416.23 Rupees Nine Thousand Four Hundred Each

dia and 1000 mm long. Air Termination Base tested for conditioning, Sixteen And Paise Twenty Three Only

Ageing Test & Lightning impulse current withstand test: 100 kA of

10/350µs waveform in an accredited Third party laboratory as per

& 6.4 of IEC 62561-1 2017 protocol with MAST 34mm dia 3000 mm

long- Cold Galvanized

352 280.00 SITC of 8 mm dia solid Aluminium Conductor for roof top mesh grid 299.97 Rupees Two Hundred Ninety Nine And Mtr

and tested as per IEC 62561- 2 conducted in the Govt. accredited Paise Ninety Seven Only

thirty party laboratory to meet the requirement of IS/IEC 62305 with

Required Accessories - Aluminium Holding clamp at every 1 mtr

distance, Aluminium/SS cross splicer at every crossing of Alu.

conductor, Expansion piece with connectors at every 20 mtr distance,

Aluminium straight Splicer to connect conductors. All Accessories

should be tested as per IEC 62561-1 2018 Cl. 6.3 for conditioning &

Ageing Test & 6.4 for Lightning impulse current withstand test:

kA of 10/350µs waveform(Ageing & Electrical test ) conducted in a

sequence manner & tested in the Govt. accredited Third party

laboratory to meet the requirements of IS/IEC

Item Quantities Item of work Estimated Estimated Rates In Words Unit Amount in Rupees

No. estimated but Rates In

may be more or Figure

353 350.00 SITC of 10 mm MS Round Solid Conductor having smooth surface 728.21 Rupees Seven Hundred Twenty Eight And Mtr

Should be tested and use exclusively for lightning protection (Vertical Paise Twenty One Only

Riser/Down Conductor which shall be concealed in Column OR

Flushed on) to meet the requirement of IS IEC 62305 With Accessories

- Earthing stud of dimension SS-75mm OD plate with 10mm dia tail

connector used in structural steel ring earthing system to meet the

requirements of IS/IEC 62305. (For Interconnecting the Column and

the Terrace AL Conductor / Strip/Flat), SS Cross Connector to

connect Earth fixing point to vertical raiser/Down conductor, SS

Straight Splicer at every 4 Mtr to connect MS conductor in column,

Bonding /Rebar Clamp at every 3 mtr suitable for interconnecting

round conductor with reinforcement inside the concrete for structural

earthing system, SS connector -To connect external conductor 8-

mm with earth fixing point. All Accessories should be tested as per

IEC 62561-1 2018 Cl. 6.3 for conditioning & Ageing Test & 6.4 for

Lightning impulse current withstand test: 100 kA of 10/350µs

waveform(Ageing & Electrical test ) conducted in a sequence manner &

tested in the Govt. accredited Third party laboratory to meet the

requirements of IS/IEC

354 180.00 SITC of Galvanized Steel Flat 25x6 mm thickness from earth electrode 154.53 Rupees One Hundred Fifty Four And Paise Mtr

directly in ground as required. Zinc coating: 500 g/m square Fifty Three Only

(Approx:70 micron coating) tested and used exclusively for lightning

protection earthing system and ring equipotential bonding.

355 6.00 SITC of 14.2 mm dia 3 mtr long Earth electrode of High tensile steel 5992.33 Rupees Five Thousand Nine Hundred Per Set

electrode with 250 micron copper bonding & 1 bag of Carbon fill Ninety Two And Paise Thirty Three Only

Based environment friendly backfill tested as per IEC 62561-7 in

NABL accredited Laboratory and suitable stainless Steel double sided

clamp. Eco Friendly rust proof heavy duty weather proof Polyethylene

Earth Pit Chamber with following dimensions :254 mm dia (top),

mm dia (bottom) & 260 mm (height).

Item Quantities Item of work Estimated Estimated Rates In Words Unit Amount in Rupees

No. estimated but Rates In

may be more or Figure

356 8.00 37.1 Supplying, installation , testing & commissioning of Heat pumps system 198477.12 Rupees One Lakh(s) Ninety Eight Each

for hot water using heat energy source from ambient air to Hot water, of High Thousand Four Hundred Seventy Seven

efficiency and energy saving operation, capable of heating water at 55⁰ to 60⁰ And Paise Twelve Only

C with silent operation (the sound level should not exceed 65 dB). The Heat

Pump shall have LCD display control panel with built in diagnostic and

troubleshooting information and an inbuilt cycle for defrosting in case icing

occurs on evaporator including all other mounting, fitting and controls, all

interconnecting wiring/cabling between heat pump and electric panel etc

including hot water storage tank complete in all respect with but not limited

to following specifications. Power Supply V/Ph/Hz : 400V~440V, three Phase,

50Hz. Suggested Maximum output water temperature in 0C: >55 ⁰C, ambient

temperature range in 0C: -5 ⁰C~45 ⁰C , Type of Fan : Low Noise axial fan

Suggested Noise level: dB <65 , COP: 3.0 to 4.0. Hot Water Storage Tank

consisting of GI/MS/SS cylindrical shape clarifier tank.(inlet temperature of

hot water storage tank >550C) suitable for minimum 4 Kg /Sq.cm working

pressure.Tank shall be provided with water flow meter, inlet / outlet, overflow,

drain connection with cover, 6 mm thick tank, pressure relief valves, pressure

gauge at inlet / outlet with isolation cock, thermometer at inlet /outlet, ball

Valve, safety valve,check valve etc and capacity of the tank shall be for 03 Hr

rated output. The complete system to be tested to a pressure of 10 Kg/cm2

complete in all respects including temperature indicators, thermostat and

other required accessories. Tank shall be insulated with 100 mm thick crown

150 grade & 50 mm rock wool pads of approved quality and cladded with

SWG aluminium sheet cladding. (37.1.3) 500 Litre

357 15.00 SITC PROVIDING AND FIXING OF ACE MORTAR SEAL FOR FIRE 23886.50 Rupees Twenty Three Thousand Eight Sq.Mtr

PENETRATION SEALING SYSTEM IN FLOOR OPENINGS FOR Hundred Eighty Six And Paise Fifty Only

VERTICAL SHAFTS & WALL OPENING FM APPROVED CLASS

THE MORTAR SEAL SHALL HAVE MINIMUM 2 HOURS FIRE

RESISTANCE AND MINIMUM THICKNESS OF 100MM. IT SHOULD

HAVE BEEN TESTED AT CBRI ROORKEE WITH FOLLOWING TESTS

IN SEQUENCE ON SAME SAMPLE WITHOUT ANY TOUCH UP OR

MODIFICATIONS DURING THE TEST. With Fire rated Foam and PVC

Intumescent Wrapping systems. 1) IMPACT TEST 2.5 KGS HAMMER

2) WATER ABSORPTION FOR 24 HOURS 3) ACCELERATED AGEING

FOR 168 HOURS 4) VIBRATION TEST FOR 4 HOURS 5) FIRE

RESISTANCE TEST AS PER ESTM-E814,UL-1479, IS 12458, BS

PART 20, 6) HOSE STREAM TEST. MANUFACTURERS ORIGINAL

BATCH TEST CERTIFICATE FOR PHYSICAL PROPERTIES TO BE

SUBMITTED. (HSN CODE -381600)

Item Quantities Item of work Estimated Estimated Rates In Words Unit Amount in Rupees

No. estimated but Rates In

may be more or Figure

358 2.00 (A) GENERAL DESCRIPTION OF LIFTS. [1] GEAR LESS LIFT DRIVE 2117628.62 Rupees Twenty One Lakh(s) Seventeen Ea.

(MRL) comprising of High Starting torque Lift 3 phase 440 V A. C. Thousand Six Hundred Twenty Eight And

Permanent Magnet Synchronous motor of proper rating with high Paise Sixty Two Only

efficiency shall be used.[2] Micro processor based / PLC, ACVVVF,

vector control drive with encoder feedback closed loop system shall be

used for lift car and door operation which shall be full collective

selective operation hall call demand response, UP/DOWN hall stops,

Main, Up/ Down Contactor with overload and phase reversal relay

and safety controls.[3] Car with M S platform with bracings of

adequate size and to sustain the impact load cabin + passenger with

safety factor of fire for steel and side panels of Stainless steel of sheet

of grade 304 duty. Car ceiling will be S.S. finishes with aesthetic

appearance with LED ceiling lights. Car flooring shall be of s/s

chaker plate design suggested of engineer in charge. of engineer in

charge. Car doors shall be of stainless steel grade 304, hairline finish

with centre opening / telescopic automatic doors. Car panel will also

be S.S. 304 finished with emergency stop device, mechanical door

safety device, facility of auto/ attended mode. All car panel buttons

and all floor switches must be with brail language as per lift act.

[4] All landing doors must be fire rated for 2 hour shall be fully

automatic centre opening/ telescopic opening made of hairline finish

steel grade of 304 with key holes and infrared curtains with Unlocking

facility from outside.[5] Appropriate battery operated emergency light

in the car along with alarm switch shall be provided. Also, Emergency

Light & Fan should start immediately without any Time Delay as soon

as power fails.[6] Digital scrolling indicator system for up-down arrow

along with floor position indicator shall be provided inside the car and

at all floors.[7] Full height infra red curtain with multiple cross /

crossing light beams shall be provided.[8] Automatic Rescue Device

(ARD) shall be provided accordingly of passenger capacity with

Manual Rescue Operation ( Manual Cranking Facility). [9] Audio

visual indication in the lift car showing over loading shall be provided

such that doors kept open till excess load is removed.[10] Spring

buffers/PU Buffers shall be provided.[11] Car fan as per passenger

capacity with automatic sleep timer shall be provided.[12] Voice

annunciator with suitable music shall be provided in lift car. [13] Self

diagnostics system for operational and safety parameters shall be

provided in control panel.

Item Quantities Item of work Estimated Estimated Rates In Words Unit Amount in Rupees

No. estimated but Rates In

may be more or Figure

[14] Mechanical over speed governor with governor calibration as per

actual site parameters and submission of calibration certificate

submission, door key holes in the floor doors, fireman switch shall be

provided.[15] Lift machine hoisting arrangement in the lift machine

room and monkey ladder for lift pit should be provided by the lift

agency, along with the other steel structure works, foundations for the

machine etc.[16] In the hoist way fascia plate shall be provided

without any extra cost, where ever required as / if directed by

engineer in charge.[17] Permanent wiring with necessary safety

devices like RCCB in all circuit, Over Voltage Under Voltage protection

and THD eliminator in circuit for lift machine room and lift well with

proper numbers of light points, with fixtures, exhaust fan and plug

points shall be provided by the agency. Only 3 phase Power Supply

shall be made available by department in lift machine room.

Necessary Earthing as per Lift Act/Rules shall be arranged by Lift

Agency.[18] Any civil/ electrical works for additional and alteration in

lift shaft and machine room related to erection of lift shall be made by

lift agency without any extra cost. (granite / marble fixing around all

landing door openings are not in lift agency’s scope.)

[19] Agency has to provide all working drawings and documents and

liaison services for obtaining all necessary permission from lift

inspector and other authorities.[20] acrylic transparent

licence/display A4 size holder in lift car [20A] As per statutory

requirement of Govt. Of Gujarat lift & escalator act 2000, lift agency

1. Car top safety barricade

2. Push & talk communication system.

3. Fireman's switch operation at Ground Floor.

4.carrying out third party lift inspection during/after lift erection and

provide report by third party authorized by concern licensing

authority 5.agency has to provide third party insurance up to

completion of free maintenance period and submit the document for

the same.[21] Car Panel Operating Buttons at an accessible height

from wheelchair for handicapped person and raised numbers with

brail mark with floor position indicator/buttons must be of Auto Glow

type clearly visible when view from inside cabin.[22] For Physically

Handicapped person Full Length Handrails of hairline finish steel

grade of 304 should be provided at appropriate 900mm height on the

Rear & Side Wall Panels in Lift Car. [23] With Necessary kVA rating

voltage controlled Stabilizer suitable for your controller, drive and all

equipments of lift. [24] Necessary rating of DP Elcb and FP Elcb

required for lift is in scope of work which rating is sugested by

CEICED Department (electrical Inspector)

Item Quantities Item of work Estimated Estimated Rates In Words Unit Amount in Rupees

No. estimated but Rates In

may be more or Figure

(B) SPECIAL FEATURES DESCRIPTION OF LIFTS for PREMIUM

category1. Advanced control system dual 64 bit embedded

microprocessor with CANBUS Serial Communication mode including

Regenerative power efficient operation,on site programming facility,

Anti nuisance, Pte-opening, BMS/RMS with necessary online real time

monitoring system having necessary connectivity for remote

monitoring & other suitable supporting hardware & software devices

to fulfil the purpose.2. Floor Indication LCD Display with call

registration & brail mark with arrival gong and hall lantern & TFT

Screen in the car with MP3 Voice Announcer.3. CAR Panel should be

Scratch resistive SS Moonrock finish / Hair Line / Honeycomb for car

and all Doors, All landing doors must have fire rating up to 2 hours

and car door must have multi-level crisscross beam door protection.4.

To & fro communication system & wiring (i.e. car , control room &

guard room ) and Each elevator are equipped with remote monitoring

system.agency has to provide mobile app and user id and password

13 Passengers,. Ground plus 5 upper floors with Rated Speed of

m/sec., (C) With General PLUS ADDITIONAL SPECIAL FEATURES

attached herewith. Prem. Cat.

Item Quantities Item of work Estimated Estimated Rates In Words Unit Amount in Rupees

No. estimated but Rates In

may be more or Figure

359 150.00 Supply, Installation, Testing & Commissioning of following size of Grid 40658.56 Rupees Forty Thousand Six Hundred Fifty Per KW

Tied Solar Power Plant with Eight And Paise Fifty Six Only

Solar Panels (ALMM approved): Frame Material : Anodized Aluminum

alloy Frame With Twin Wall Profile, Front Cover : High Transmission

Low-Iron Tempered Glass (AR Coated), High efficency and positive

power tolerance Pmax: 0/+5, Module Efficiency should be approx.

19.5%-22%, Normal operating temperature 45'C, Junction Box with

Waterproof IP67 & MC4 Compatible and Enclosed with Bypass diodes,

100% Electroluminescence test to ensure error free Modules, Thep.

temp. co-efficient of the PV module shall equal or better than -

0.45%/degree C. Solar PV modules of minimum fill factor 75% to be

used. Unit Production:- More than 4.5 Unit /kw /day (Actual)(1Year

Avg) With 10 year Product warranty. Modules must be complied to the

DCR(Domestic content requirements). The Ration of AC to DC is 5:6

for the Installation capacity which are given in AC KW.

Solar Inverter: MPPT Range: MPPT Range: 80-1000 V , Max efficiency:

97.5% - 98.9%, O/p Frequency: 50/60Hz, Operating Altitude (m)

≤4000, O/p Power Factor: ~1, O/P THDi: <3%, Operating Tempreture

Range: -25~60°C, Integrated protection of Inverter are Anti-islanding

Protection, Input Reverse Polarity Protection, Insulation Resistor

Detection, Ground fault protection, Residual Current Monitoring Unit,

Output Over Current Protection, Output Short Circuit Protection,

Output Over Voltage Protection, PV array string fault Protection.

Protection Degree: IP65, User Interface LCD & APP, Datalogger &

Communication: GPRS / Wi-Fi.

Item Quantities Item of work Estimated Estimated Rates In Words Unit Amount in Rupees

No. estimated but Rates In

may be more or Figure

Integrated, Input Reverse Polarity Protection Integrated, Insulation

Resistor Detection Integrated, Residual Current Monitoring Unit

Integrated, Output Over Current Protection Integrated, Output Short

Circuit Protection Integrated, Output Over Voltage Protection Integrated,

Protection Degree: IP65, User Interface LCD & APP,Datalogger &

Communication: GPRS / Wi-Fi, Module Mounting Structure: The

mounting (Rectangular pipe / square pipe / circular pipe) with requisite

cross bars, nuts and bolts, etc. shall be Hot deep galvanized with

minimum 80micron coating. The Rectangular / square /circular hollow

pipe section used for the structure should have a minimum thickness of

2.0 mm. other than above, the material thickness should be minimum

mm. A certificate of a structural engineer certifying the strength and

stability of the mounting structure to withstand the weight and wind

speed of 150 km/hour , shall be submitted by the vendors. Hot Dipped

Galvanized steel coils. suitable arrangement for base plate for foundation

solar panel mounting, the structure should be suitable for carry the load

of solar panel,wiring, sprinkler system etc. with necessary foundation

work/wall mount, j bolt, anchor fastner etc. the nut bolt used for

installtion of stucture should be (SS 304) quality.The ground clearance of

the bottom most edge of solar panel shall not be less than 300 mm to

1200 mm or as per site’s technical/feasibility requirement.

a. Column –The minimum section (thickness) should be 60MM*40MM

b. Rafter - The minimum section (thickness) should be 60MM*40MM

c. Purlin - The minimum section (thickness) should be 40MM * 40MM

Balane of System with necessary Swichgears (Suitabel size and protection

of ACDB & DCDB), inter connecting wiring, earthing system as per the

CEIG drawing approval,

lightining arrester system as per the CEIG drawing approval, all

liasoning work with various gov. dipartment like state nodal

agency,DISCOM & CEIG is included in agency scope (Excluding All

charges namely GEDA Application fees, Solar connectivity Charges,

Meter connectivity Charges, Meter testing Charges and system

stability/strenthning charges.) (E) Grid Tied Solar Power System: 51 -

100 kW (3 - phase)

Total (B) (Electric) :-

Total Civil + Electrical Cost (A+B) :-

Item Quantities Item of work Estimated Estimated Rates In Words Unit Amount in Rupees

No. estimated but Rates In

may be more or Figure

Rs In Words :- Rupees Twenty Nine Crore Sixty Seven Lakh(s) Fifty Five Thousand Six Hundred Seventy And Paise Fifty One Only

I / We am / willing to carry out the work at __________ above / below __________ percentage (should be written in figures and words) above / below the estimated amount mentioned above.

Amount of my/our tender works out as under.

Deduct _________ % Below. Add _________ % Above.

Note - 1 The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge for which no extra payment shall be

Note - 2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

Note - 3 GST and Income tax TDS will be deducted at a source while making payments of bills

In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017 Cement Consumption/16/C

Note - 4 Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is a change as per actual mix design the cost of difference of cement consumption

have been deducted from the rate of original item at the rate of input rate mentioned in all the tender.

Dated Signature of Deputy Executive Engineer Executive Engineer

the Contractor Construction (R & B) Sub Division No.3 Navrangpura (R & B) Division

Ahmedabad Ahmedabad.