PROVN OF TOILET BLOCK AT FD WKSP COY AND OTHER SANCTIONED WORKS UNDER GE MISAMARI

Amount

Dismantling AC Corrugated/ Semi corrugated Sheets as in Roofing including Ridge or Similar Pattern Roof Coverings, complete all as specified and as directed.

Taking down Chowkat or Frame (without taking off Shutter from the Frame) exc. 1.50 Square Metre but not exc. 4.00 Square Metre Each, complete all as specified and as directed.

Taking down Chowkat or Frame (without taking off Shutter from the Frame) not exc. 1.50 Square Metre Each,,complete all as specified and as directed.

Taking down Cement Plaster of any description on Brick Walls, Concrete Surfaces including racking out joints, hacking for key, scrubbing down with Water remove Dust, debries/ rubbish etc., complete all as specified and as directed.

Dismantling Timber Scantling 40 Sq Cm and over in Section in any position in Unframed Work, complete all as specified and as directed.

Roughing surfaces of old concrete floor by pickinhg,sweeping clean and washing down with water remove dust etc.,complete all as specified and as directed.

Surface dressing n exc15 cm deep in soft and loose soil, complete all as specified and directed.

Surfaces excavation n. exc 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil complete all as specified and as directed.

Excavation in trenches not exc. 1.5 Metre Wide and not exc. 1.50 Metre in Depth for foundation etc. or for Shafts, Wells, Cess Pits, Manholes, Pier Holes for laying of UG Cable/Pole/Stays etc, and getting out as in Soft/Loose Soil, complete all as specified and as directed.

Excavation over an areas n.exc. 1.5m deep and getting out in soft/loose soil complete all as specified and as directed.

Excavation over an areas exc. 1.5m deep but not exc. 3.0m and getting out in soft/loose soil complete all as specified and as directed.

Excavating in post holes (or simlar holes) each n exc. 0.50 cm getting out returing filling in and ramming earth as broken rubble mixed with earth around in layers n exc. 25 cm watering & removing surplus soil to a distance n exc. 50 m and making good surface.

M&L Brick Work with Sub-Class ‘B’ Bricks (with Old Size Bricks), Straight or Curved on Plan exc. 6.0 Metre mean Radius, built in Cement Mortar 1:6, complete all as specified and as directed.

M&L brick work with sub-class ‘B’ Bricks Straight or Curved on Plan exc.any radius in half brick thick built in Cement Mortar 1:4, complete all as specified and as directed.

M&L Rendering 15mm thick in Cement Mortar 1:4 on Brick Walls or on Concrete Surfaces, plastered surfaces finished Even and Smooth without using Extra Cement, complete all as specified and as directed.

M&L Rendering 15mm thick in Cement Mortar 1:6 on Brick Walls or on Concrete Surfaces, plastered surfaces finished Even and Smooth without using Extra Cement, complete all as specified and as directed.

M&L Rendering 10mm thick in Cement Mortar 1:4 on Brick Walls or on Concrete Surfaces, plastered surfaces finished Even and Smooth without using Extra Cement, complete all as specified and as directed.

M&L Rendering 5mm thick in Cement Mortar 1:3 on ceiling or on Concrete Surfaces, plastered surfaces finished Even and Smooth without using Extra Cement, complete all as specified and as directed.

M&L Cement Concrete 1:4:8, Type D2, (40mm graded aggregate) in Foundations, Filling and Mass Concrete, etc. including Use and Waste of Formwork as required/ordered, complete all as specified and as directed.

Returning, Filling in, including Spreading, Levelling, Watering and Well Ramming in Layers not exc. 25 Cm in Soft/Loose Soil, complete all as specified and as directed.

Removing excavated Materials (Soils) not exc. 50.00 Metre and depositing where directed at a level not exc. 1.50 Metre above the Starting Point in Soil, complete all as specified and as directed.

M&L Cement Concrete 1:2:4, Type B2, (40mm graded aggregate) in Foundations, Filling and Mass Concrete, etc. including Use and Waste of Formwork as required/ordered, complete all as specified and as directed.

M & L for 75mm thick cement concrete 1:3:6 type C2, using 40 mm graded aggregate as in plint protection and finishing surface even and smooth without using extra cement, complete all as specified and as directed.

M&L Formwork to Sides of Concrete Foundations, Footings, bases of Columns, Raft and Raft Beams, Sides and Soffits (if any) of foundation and plinth beams and similar work; Square, rectangular or polygonal, vertical or to batter, flat, rough finished surfaces of concrete, complete all as specified and as directed.

M&L Formwork to Sides and Soffits of Floor or Roof Beams, Lintels, Cantilevers, Shelves including Supports, Overhangs, etc. also splays between Floors and Beams, etc., rough finished surfaces of Concrete, complete all as specified and as directed.

M&L Formwork to Soffits of suspended Slabs such as Roof Slabs, Floor Slabs, Landings and similar work; not exc. 200mm thick (horizontal or sloping), rough finished surfaces of Concrete, complete all as specified and as directed.

M&L Formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter, complete all as specified and as directed.

M&L TMT Bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia, complete all as specified and as directed.

All as per Item no.28 here in before but for 6mm to 8mm, complete all as specified and directed.

M&L TMT Bars 5mm dia and over upto and including 10mm dia in Stirrups, Spacers and Binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia, complete all as specified and as directed.

M&L Reinforced Cement Concrete (Nominal Mix) 1:2:4 (20mm graded aggregate) in Foundations including Rafts, Footings, Foundation Beams; Plinth Beams; bases for Columns, etc.; Basement Slabs, Under-reamed Piles and Mass Concrete, complete all as specified and as directed. NOTE : Reinforcement & Formwork will be measured and paid separately under relevant Items.

M&L Reinforced Cement Concrete (Nominal Mix) 1:2:4,type A1 (20mm graded stone aggregate) as in beams, cantilevers, bressummers, lintels over 1.50 Metre span, complete all as specified and as directed. NOTE : Reinforcement & Formwork will be measured and paid separately under relevant Items.

M&L Pre-cast Reinforced Cement Concrete (nominal mix) 1:1.5:3 type B1(20mm graded stone aggregate) in Slab Supported on wall, Cover Slabs for Manholes, Shelves and Similar Articles, etc., Set in Cement Mortar 1:6 including use and waste of Formwork as required/ordered at Site(s), complete all as specified and as directed. NOTE : Reinforcement will be measured and paid separately under relevant Item.

M&L Reinforced Cement Concrete (Nominal Mix) 1:1.5:3,type A1 (20mm graded stone aggregate) as in beams, cantilevers, bressummers, lintels over 1.50 Metre span, complete all as specified and as directed. NOTE : Reinforcement & Formwork will be measured and paid separately under relevant Items.

M&L Reinforced Cement Concrete (nominal mix) 1:2:4 type B1(20mm graded stone aggregate) in Slab Supported on wall, Cover Slabs for Manholes, Shelves and Similar Articles, etc., Set in Cement Mortar 1:4 including use and waste of Formwork as required/ordered at Site(s), complete all as specified and as directed. NOTE : Reinforcement will be measured and paid separately under relevant Item.

M&L for RCC types A1 1:1.5:3, 20mm graded aggregate (nominal mix) as in Walls, retaining walls, basement walls, ballast walls, baffle wall and the like; any thickness; above top of footings; including attached pilaster and buttresses, complete all as specified and as directed. NOTE : Reinforcement & Formwork will be measured and paid separately under relevant Items.

M&L Hardcore of broken stone or boulders of gauge exc. 63mm but not exc.100mm, deposited, spread and levelled in layers not exc. 15 Cm thick, watered and rammed to a True Surface, complete all as specified and as directed.

M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering, complete all as specified and as directed.

M&L for sand filling under floors spread, levelled, watered and well rammed in layers n.esc 25 cm thick, complete all as specified and as directed.

M&L 75mm thick Cement Concrete 1:4:8, type D2 (40mm graded aggregate), as in Sub-base finishing Concrete Surfaces Even and rough, complete all as specified and as directed.

M&L 100mm thick Cement Concrete 1:4:8, type D2 (40mm graded aggregate), as in Sub-base finishing Concrete Surfaces Even and rough, complete all as specified and as directed.

M&L Non skid ceramic coloured jointless tiles 7 to 8mm thick (Square/ Rectangular) area of each tiles exceeding 0.11 Sqm but n.exc. 0.18 Sqm in floors etc. over and including 15 mm thick screed bed in CM 1:6 set and jointed in neat cement slurry and pointed in white or colored cement to match the surface of tiles complete all as specified and as directed.

M&L Non skid ceramic coloured jointless tiles 7 to 8mm thick (Square/ Rectangular) area of each tiles exceeding 0.06 Sqm but n.exc. 0.11 Sqm in floors etc. over and including 15 mm thick screed bed in CM 1:6 set and jointed in neat cement slurry and pointed in white or colored cement to match the surface of tiles complete all as specified and as directed.

M&L glazed ceramic coloured tiles, glossy finished of size 350x450x7mm/ 350x250x7mm /300x600x7mm thick as in vertical surfaces such as skirting/dados and riser of stems., over and including including 10 mm thick rendering/backing coat in CM 1:4 and set and jointed in neat cement slurry and pointed in white or colored cement to match the surface of tiles,complete all as specified and as directed.

M&L for Machine pressed Precast concrete interlocking paver block any shape and size confirming to IS15658-2006 of 60mm thickness M-35 Grade over and including 25 mm thick sand screed bed/cushioning etc.,complete all as specified and as directed.

M&L for providing precast cement concrete 1:2:4 solid blocks size 400x300x100mm kerb stones (one edge rounded or chamfered as directed) setting in mortar 1:4,complete all as specified and as directed.

S & F 25mm dia, M S Powder coated , tubular curtain rail fancy type with and incl MS brackets and end stoppers,complete all as specified and as directed.

M&L Flush Door Shutter 30mm thick, Solid Core Construction with Block Board Core and Plywood face Panels commercial type on both side with Particle Board and fitted to Wooden Chowkat, complete all as specified and as directed.

M&L Second Class Hardwood 35mm thick Glazed and Skelton Shutters, open rebated and prepared to receive Glass, Gauze, etc. (without Sash Bars) edges of Framing plain, chamfered or rounded, mitred beads for screwing Glass, Gauge, etc. sizes of members of Shutter as speci fied in MES Schedule Part-I Section 8, Clause No. 8.24(a) and fitted to Wooden Chowkat, complete all as specified and as directed.

S&F Steel Window/Ventilator with side Hung Shutters including Hinges with Steel Handle and Steel Peg Stay, complete with Glazing Bars, dovetailed or welded, complete all as specified and as directed.

M&L Steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and as directed.

M&L Sheet Glass, Ordinary, 3.0mm thick, Glazing in Wooden/Metal Frames and glazed with Beads or Oil Putty, area not exc. 0.50 SQM in Each Pane, complete all as specified and as directed.

S&F Stainless Steel Wire Cloth 0.36mm nominal dia of Wire and average width of aperture 1.40mm and fixed with Stainless Steel Wire Staples and fixed, complete all as specified and as directed.

S&F Aluminium Handle 150mm long Cast type, complete all as specified and as directed.

S&F Stainless Steel Butt Hinge of size 100mm, medium weight, cold rolled and fixed, complete all as specified and as directed

S&F Aluminium anodised Barrel Tower Bolt 150 mm long, Extruded Section and fixed, complete all as specified and as directed.

S&F Ordinary Rat Tail 300mm, Rod Pattern Springs including Roller and Roller Plate and fixed, complete all as specified and as directed.

S&F Mild Steel Sliding Door Bolt 300mm long, Plate type, Black Japanned Finish with bright Bolt not less than 12mm dia, minimum 6 Bolts and Nuts 4 on Bolt Plate 2 on Staple Plate and fixed, complete all as specified and as directed.

S & F of mild steel scew bolts 5 to 10 mm (Machine made) with hexagonal or squre heads at one end and screwed the other , or screwed both ends, each screw end to be fitted with washers and one hexagonal or squre nut , exc 5 cm but not exc. 10cm long complete all as specified and directed.

M&L Steel Work in Tubular Trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS:1161-1979 grade St.-240, complete all as specified and as directed.

M&L Roof plate with sleeve piece riveted or welded thereto and similar roof and ceiling connection, complete all as specified and as directed.

S&F Pre-painted Galvalume Aluminum Zinc Coating GI based Corrugated Steel Sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding, fixed with self tapping screws as specified, complete all as specified and as directed.

S&F Pre-painted Galvalume Aluminum Zinc Coating GI based Plain Steel Sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified, complete all as specified and as directed.

S&F 600x600mmx4mm thick designer 'E' board classic as in false ceiling including S & F 'Tee" grid frame work, consisting angle cleats of size 25mm wide 1.6mm thick wrapping the suspending wire around purlin/rafter with 02 Nos, 1.60mm dia GI wire @ 600mm C/C on main Tee. The section consisting of main & cross Tee 37mm x24mmx0.60mm thick and. Perimeter angle 24mmx24mm x0.50 mm thick shall be fixed to wall with GI screw of 40mm long @ 450mm C/C, complete all as specified and as directed.

S&F Vitreous China wash down water closet pan (pedestal pattern), white including plastic seat cover and necessary connection, complete all as specified and as directed.

S&F vitreous china squatting pan "ORISSA" pattern size 580 x 440mm white with integral foot rests complete including provn of lime concrete bedding, complete all as specified and as directed.

S&F in PVC low level flushing cistern 10 ltrs capacity with and including fixing of Flush pipe of polyethylene of low or density 32 mm dia, complete all as specified and as directed.

S&F PVC Connection Pipe 15mm in size with PTMT Nuts of length 450mm and fixed, complete all as specified and as directed.

S&F vitreous China wash basin, white, flat back, size 550x400mm including Waste coupling of PTMT(Minimum weight 32mm- 45gms) and brackets including 32mm bore PVC waste pipe, complete all as specified and as directed.

S&F Pillar Tap 15mm bore (dia), Cast Copper Alloy, fancy type Chromium Plated with Capstan Heads, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed Shanks and Fly-nuts, screwed for Iron Pipe and fixed, complete all as specified and as directed.

S & F vitreous china bowl urinal flat back, size of 465x355x265mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe , and waste pipe), complete including providing and fixing plugs, bedding urinal against wall in CM 1:2 and incl 60cm long brass screws pointing around urinal back in cement etc complete all as specified and directed.

S&F Stop Cock 15mm bore , Fancy type, Chromium Plated with long shank, Concealed type, screwed down high pressure with Crutch or Butter-fly Handle, screwed both Ends for Iron Pipe or for Unions and fixed, complete all as specified and as directed.

S & F PVC waste pipe of 32 mm bore of adequate length complete all as specified and as directed.

S&F Bib Tap 15mm bore (dia), Cast Copper Alloy, Chromium Plated with Crutch or Butter-fly Handle, screwed down, screwed for Iron Pipe or for Brass Ferrule and fixed, complete all as specified and as directed.

S&F PTMT grating Doom 100mm dia (minimum weight 40 Grams) complete all as specified and as directed.

S&F PVC (SWR) 110mm bore (dia) Soil, Waste and Ventilating Pipe, Single Socketed, in any length with Rubber Ring Joints, laid in Trenches or in Floors complete all as specified and as directed.

S&F PVC (SWR) 110 mm bore (dia) Bend any type, and jointing with Solvent Cement , complete all as specified and as directed.

S&F PVC (SWR) 110mm bore (dia) Vent Cowl, jointing with Solvent Cement and fixed, complete all as specified and as directed.

Supply & laying Steel Water Tubing 15mm bore (dia), galvanised, ‘medium grade’ with all Fittings, fixed on walls, ceiling or laid in floors or any other situation, complete as all specified and as directed.

All as per Item no. 81 here in before but for 20 mm, complete all as specified and directed.

S&F Rotational Moulded Polyethene Water Storage Tank 1000 Litre Capacity (Cylindrical, Vertical with Closed Top), 3 layered, hoisted and fixed in Position all as specified in MES Scheduleincluding wash out GI Pipe 32mm of 450mm length with stopper, complete all as specified and as directed. , complete all as specified and as directed.

S&F Ball Valve 20mm dia (minimum Weight 210 Gram), high pressure of PTMT with epoxy coated Aluminium Rod and high density Plastic Ball, screwed for Iron Pipe and fixed, complete all as specified and as directed.

S&F Factory made Solid PVC Door Frame of size 50x47 mm made out of 5.0 mm thick plain colour PVC Sheet reinforced with Mild Steel Square Tube and fixing in opening as per Specification and Drawing of MES Schedule Part-II, complete all as specified and as directed.

S&F Factory made Solid Panel PVC Door Shutter 30mm thick (Style) consisting of Frame made out of Mild Steel Square Tube for Top and Bottom Rails, mild steel Frame shall be covered with heat moulded plain colour PVC 'C' Channel having PVC Sheet Strip 20 mm wide stuck inside with Solvent Cement for Styles and plain colour PVC Sheet for Top Rail, Lock Rail & Bottom Rail on either side and as gap insert for Top Rail, Bottom Rail Panelling of plain colour PVC Sheet to be fitted in mild steel Frame welded/sealed to the Styles and Rails with suitable Sheet Beading and jointed together with Solvent Cement and fixing in the Frame at Site as per Specification and Drawing of MES Schedule Part-II, complete all as specified and as directed.

M&L Cement Concrete Bed 1:4:8 type D-2 (40mm graded aggregate) of 150mm bore (dia) Drain Pipes including Packing under and Haunching to Sides of the pipes after Laying and Testing of Pipe, complete all as specified and as directed.

M&L Salt-Glazed Stone-ware Drain Pipe 150mm bore (dia), Grade ‘A’, laid in Trenches, Jointed with Cement Mortar 1:1 and testing, complete all as specified and as directed.

M&L for PCC (1:2:4) type B-1 using 20 mm graded aggregate as in benching of manholes including finishing even and smooth using extra cement, complete all as specified and directed.

M&L Preparation of newly plastered or un-plastered surfaces of walls, and applying two coats of weather coat paint (Exterior Grade) over a coat of primer, complete all as specified and directed.

M&L preparing new Plastered Surfaces of Walls and applying Two Coats of distemper oil emulsion over a coat of primer complete all as specified and as directed.

M&L preparing newly plastered surfaces of wall and applying Three Coats of White Wash, complete all as specified and as directed

M&L preparing newly plastered surfaces of Ceiling and applying Three Coats of White Wash, complete all as specified and as directed

M&L preparing new or previously untreated Wooden Surfaces of any description, over 10 Cm width or girth and applying Two Coats of Synthetic Enamel Paint (First quality) over a coat of Pink Primer, complete all as specified and as directed.

M&L preparing new or previously untreated Steel and Iron Surfaces of any description, over. 10 Cm Width or Girth and applying Two Coats of Synthetic Enamel Paint (First quality) over a Red Oxide Zinc Chrome Primer, complete all as specified and as directed.

M&L Powder coating (minimum thickness of powder coating 50 micron) Aluminium Frame for Doors, Windows, Ventilators with one or more rebates including Jointing Cleat for fixing, etc., complete all as specified and as directed

S&F anodised aluminium frame for doors, windows, ventilators and partitions with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed.

S&F 12mm thick Pre-laminated Particle Board, interior grade, pre-laminated on both side with Decorative Choice Lamination, fixed with panels incluing jointing cleats, glazing clips, rubber gasket, anodised aluminium snap beading,Screws, holfasts etc., complete all as specified and as directed.

S&F Anodised aluminium door shutters (Single/double shutter), aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing anodised aluminum snap beading handles in each door, hinges, handles, anodised snap beading screws, hold fast complete all as specified and as directed and as shown on drawings. NOTE:- (i) Fixing of shutter with fitting shall be as per manufacturers instruction (ii) Rate quoted is deemed to be inclusive of aluminum hardwares as indicated, glazing clips, rubber packing, anodized aluminum snap on beading for fixing glass panes in frame , handles,Locking Arrangement but Glass panes in frame shall be measured and paid separately under respective Sch A items separately at Supply only rates)

M&L Sheet Glass, Ordinary, 5.5mm thick, Glazing in Wooden/Metal Frames and glazed with Beads or Oil Putty, area exc. 0.50 SQM in Each Pane, complete all as specified and as directed.

Supply and fix cast iron body door closer hydrauliclly regulated, designation No. 3, universal type, suitable for door shutters of 1000mm in width and weight between 61 kg to 80 kg and fixed complete all as specified and as directed.

M&L for GI Frame Work for Seamless Ceiling comprising of GI Perimeter Channnel 0.55mm thick with Two Unequal Flanges of 20 and 30mm and Web of 27mm fixed to surrounding Wall using Nylon Sleeves and Screws at 450 mm Centre to Centre/ Intermediate Channel 0.9mm thick having Two Equal Flanges of 15mm each and Web of 45mm suspended from Soffit at approx 900mm centre to centre with GI Cleat and Steel Expansion Fasteners with and including Ceiling Section (not exc 1.20 Metre length) of 0.55mm thickness having Kurled Web of 50mm and Flange of 26mm each with Lips of 10.5mm fixed to the Interme-diate Channel with Connecting Clips across the Intermediate Channel at 457mm Centre to Centre, complete all as specified and as directed.

S & F for 4mm thick designer Non asbestos fibre cement building boards prepainted fixed to GI snap grid in ceiling flat complete all as specified and as directed.

M&L granite (of any type) tiles 20mm thick machine cut, bedded and jointed with gray cement slurry and pointed with white cement admixture of pigment to match the shade of granite stone including grinding and polishing, complete all as specified and as directed.

M&L preparing old treated/decorated Surfaces of Walls and applying One Coat of Cement Base Paint, complete all as specified and as directed.

M&L Second Class Hardwood Boarding 25mm thick, planed one side with butt joints, and fixed with nails as in Eave boards,complete all as specified and as directed.

S&F CP brass hot & cold 15mm dia wall mixture for mixing hot & cold water with shower provn with connecting legs & flengs in complete all as specified and directed.

S&F CP brass shower rose fancy type 50mm dia with length complete all as specified and directed.

S&F CP fancy type twin angle valve 15 mm dia (angle cock) cast copper alloy complete all as specified and directed

S&F Vitreous china soap dish, any type, fixed to plugs with CP plated bras screws complete

M&L brick work with sub class 'B' bricks (with old size bricks) straight or curved on plan exc 6.0M mean radius built in CM 1:4 complete all as specified and directed

Soakage well of size 1.8m dia and 3m of effective depth excavation, in any type of soil, foundation in PCC 1:3:6 wall of honey combed masonry with top ring of M25 concrete including interceptng chamber and screen chamber made of brick masonry in CM, RCC cover slab in M25, SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size n exc 15mm complete all as specified and directed

M&L for PCC 1:2:4 type B2 using 40mm grade aggregate as in surface channels and drains & coping, edging rounded or chamfered type etc complete all as specified and directed.

M&L Point Wiring with 1.5 Sqmm Copper Conductor single core FRLSH PVC insulated Unsheathed 1100 Volt grade multi-stranded Cable drawn through and including PVC Casing and Caping high grade of suitable size and its Accessories, mounted on 1.22 mm thick Sunk Mild Steel Pressed Terminal Box of suitable size duly painted with red oxide metal primer fixing/ grouting sunken/surface as per Site requirement on Wall and making good in Cement Mortar 1:3 with 3.0mm thick bakelite hylem Sheet Top Cover for mounting Switches, Sockets, etc. including PVC FRLSH insulated and unsheathed Single Core multi-stranded Copper Conductor Cable of size 1.5 Sqmm Green in Colour as Earth Continuity Conductor connected to Common Earth and Earth dolly for One Light Point controlled by One 1-Way Switch 5 Amp, complete all as specified and as directed.

All as per Item no.108 but for One Ceiling Fan/Exhaust Fan Point controlled by One 1-Way Switch 5 Amp and Regulator, complete all as specified and as directed.

All as per Item no.108 here in before but for One 3 Pin 5 Amps Switch Socket Outlet Point controlled by One Switch on Same Board, complete all as specified and as directed.

All as per Item no. 108 here in before but or One 3 Pin 5 Amps Switch Socket Outlet Point controlled by One Switch on Independent Board, complete all as specified and as directed

Description all as per item No 108 here in before but using 2.5 sq mm single core copper conductor cable of multistranded FRLSH PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket cobmination point incl running of 2.5 sq mm copper conductor FRLSH PVC wire as earth continuity conductor along with wiring and connecting to the common earth dolly.

S&F Switch Piano, Flush type, Single Pole, 1-Way, 5 Amps, 240 Volt, conforming to IS and connecting up, complete all as specified and as directed.

S&F Ceiling Rose, Surface Bakelite of size 65x50mm, 3 Terminals, AC, 50 Hz, 240 Volts, conforming to IS and connecting up, complete all as specified and as directed.

S&F Socket Outlet, 2-in-1, Flush type, multi-purpose, 2/3 Pin, 5 Amp, 230 Volt, conforming to IS and connecting up, complete all as specified and as directed.

S&F Switch Socket Combination 2-in-1, Flush type, multi-purpose, 2/3 Pin, 5 Amp, 240 Volt, conforming to IS and connecting up, complete all as specified and as directed.

S&F Ceiling Fan Regulator, Step type, Flush type, heavy duty, suitable to work on 230 Volt, AC supply and connecting up, complete all as specified and as directed.

S&F Lamp Holder Surface Bakelite with Back Plate insulated body suitable for Batten/Angle Fittings and fixed with PVC Block, conforming to IS and connecting up, complete all as specified and as directed.

S & F LED ADORE 10 W B22 CDL 5 STAR LAMP with B 22 base capacity 1200 lumen complete all as specified.Make Havells, Cat No: LHLDEUEBML8Z010 or equivalent in CG or Polycab.

S&F pre-wired double door MCB DB made out of 18 SWG CRCA steel sheets, phosphates powder coated with copper bus bar, Earth stud, Din Rail, Polyamide Terminal blocks for incoming and outgoing circuits, inbuilt loose wire box, ground terminal blocks, duly pre-wired with thimble flame retardant copper conductors and poly layer for protection SP 240 volts 200 Amps rated bus bar, 2+6 way double door openable complete all as specified and as directed.

S&F MCB Double Pole, 20 Amps, 240/415 Volt for fixing on MCB DB’s, 10 kA,c curve 50 Hz, conforming to IS/IEC 60898 and connecting up, complete all as specified and as directed.(Make- L&T, Cat No: BB20320B, Schinder & Legrand.)

S&F MCB SP,6 Amps, 240 Volt for fixing on MCB DB’s, 10 kA,c curve 50 Hz, conforming to IS/IEC 60898 and connecting up, complete all as specified and as directed.(Make- L&T, Cat No: BB10060B ,Schinder & Legrand.)

S&F MCB Double Pole, 32 Amps, 240/415 Volt for fixing on MCB DB’s, 10 kA,c curve 50 Hz, conforming to IS/IEC 60898 and connecting up, complete all as specified and as directed.(Make- L&T, Cat No: BB20320C ,Havels & Legrand.)

S&F MCB SP,6-32 Amps, 240 Volt for fixing on MCB DB’s, 10 kA,c curve 50 Hz, conforming to IS/IEC 60898 and connecting up, complete all as specified and as directed.(Make- L&T, Cat No: BB10320C ,Havels & Legrand.)

S & F wall mounted LED 18 watts , box type (decorative) light fitting, 230 volts with extruded aluminium heat sink provided for efficient heat dissipation and intregrated electronic driver connector block etc complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including LED tube 4' x 18 watts complete all as specified and as directed. Make-Model -REGALBATTENT5UPTO1X18WDSBSWH For Batten Fitting and Model-PHOTONULTRAE2.01213T8SSTL18WLED865SPC For T8 Tubelight ,Make Havells, or equivalent in CG, Polycab.

S & F Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 15 watts with pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting and GI pipe bracket made out of GI pipe medium grade 32 mm dia 1.5 mtr long bend to required shape complete all as specified and as directed.Make-Havells,Model No - ENDURAPEARLSL25WLED757SASYTOPCMP Or Equivalent in CG and Polycab

Supply & laying LT UG XLPE sheathed PVC insulated, screened PVC bedded, Galvanised Steel Strip of Wire armoured Electric Power Cable heavy duty with stranded Aluminium Conductor 1100 Volt grade, cross-sectional area 16 Sqmm 2.0 Core, laid in trenches/surface of Wall/in GI Pipe along with Pole for connec-tion to OH Lines including Brass Cable Glands Mild Steel Flat Iron Clamps, etc. and Testing, complete all as specified and as directed. NOTE : Earthwork, Sand Cushioning, Bricks, GI Pipe, etc. will be measured and paid under appropriate Items.

S&F Sub-Class ‘B’ Brick, well burnt, laid breadthwise along the length of Cable laid in trenches over Sand Cushion laid for UG Cable Protection, complete all as specified and as directed.

M&L Sand Cushioning (dry) in trenches/ducts for protection of UG Cables (below, above and around the UG Cable laid in Trenches) of 23 Cm Spread thickness (8 Cm in depth before laying the Cable and 15 Cm in depth after lay-ing the Cable) and consolidated (punned) upto 180mm thickness, complete all as specified and as directed. NOTE: For the purpose of Payment, Punned thickness of Sand Cushioning only shall be measured and paid for.

S&F Galvanised Iron Pipe 40mm bore (dia), Light grade as in protection of UG Cable laid in Trenches/fixing with Poles with Mild Steel Flat Iron Clamps, complete all as specified and as directed. NOTE: Cost of Mild Steel Clamp, Nuts, Bolts and painting is deemed to be included in the QUOTED UNIT RATE.

S&F Sheet Metal Enclosure MCB DB, SPN, 8-way with 200 Amp rated Bus-bar, 240 Volt, Double Doors with Magnitic Locking System and connecting up, complete all as specified and as directed.

S&F Sheet Metal Enclosure MCB DB, SPN, 4-way with 200 Amp rated Bus-bar, 240 Volt, Double Doors with Magnitic Locking System and connecting up, complete all as specified and as directed.

Supply & laying Steel Water Tubing 25mm bore (dia), galvanised, ‘medium grade’ with all Fittings, fixed on walls, ceiling or laid in floors or any other situation, complete as all specified and as directed.

S&F 25mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed (as approved) complete all as specified and as directed.

Boring holes horizontally under road without damaging the surface of road of any type (minmum 1.0 metre below the raod surface with the help of GI Tubing not ex. 50mm bore (dia) for passing of UG cable, complete all as specified and as directed. NOTE : GI Pipe laid will be measured and paid separately under appropriate item.

S&F ceiling fans AC 230 Volts single phase 1200 mm sweep complete with all accessories including MS Hook, Nuts, Bolts and washer for hanging arrangement complete all as specified and directed. Make : Usha, Model - TECHNIX PLUS, or equivalent in Bajaj/Crompton.

S&F heavy duty exhaust fan 300 mm sweep MS body, 3 wing 1400 rpm, single phase 240 volts copper wounds complete with all accessories as louvers shutters etc incl making connection through 3 core PVC coper wire run through flexible pipe. Single phase type. Make : Orient or equivalent in USHA/ Havells.

Cutting of existing CI pipe laid 80 mm dia for inserting Tees for new connection of 25 mm dia all as specified and directed by Engr-in-charge.

M&L for GI connection pieces for inserting 25 mm GI pipe into 80 mm distribution mains all as specified and directed.

Supply & laying Steel Water Tubing 40mm bore (dia), Galvanised, ‘light grade’ with all Fittings,in protection of cable at road crossing/hard standing/pole protection fixed with clam as per site or any other situation, complete as all specified and as directed.

M&L Earthing complete with Galvanised Steel Earth Plate Electrode 600x600x6mm, buried directly in ground vertically to a depth not less than 2.25 Metre below ground level with Top Edge of Earth Plate at depth not less than 1.50 Metre below normal ground level, connected to Galvanised Earth Lead Wire 4.0mm dia by means of Bolts, Nuts, Check, Nuts and Washers of Galvanised Iron or Steel and Earth Wire protected with and including GI Pipe 15mm bore (dia) ‘light grade’ upto 1.0 Metre above the Floor Level of Building where Main Switch/ DB situated, Earth Plate surrounded by a packed thickness of Char Coal or Coke Dust mixed with Common Salt in alternate layers of not exc. 150 mm thick, PCC Pit in Cement Concrete 1:3:6 (20mm graded aggre gate) and Pre-cast RCC Cover Slab of size 350x350x50 mm in Cement Concrete 1:2:4 (20mm graded aggregate), reinforced with 8.0mm dia TMT Bars @ 100mm Centre to Centre in both ways, GI Wire Mesh, Funnel with GI Watering Pipe 20mm bore (dia) ‘medium grade’ including necessary Excavation in Soft/Loose Soil, Returning, Filling in and Removal of surplus Spoil upto a distance of 50.00 Metre and all as shown in Electrical Plate No. 3 of MES Schedule Part-I and Testing on Completion including removal old existing unserviceable Earthing, complete all as specified and as directed.

bkgeneralstores

M/S RANA ENGINEERING ENTERPRISE