Construction of Community Bhawan in Ward No. 17 M.C. Dharamshala in Tehsil Dharamshala, Distt. Kangra HP (Deposit work)

Amount

Excavation in foundation, trenches etc. in earth work in all classification of soil such as pick work, jumper work, pick jumper work, blasting work, jumper blasting work, soft and hard blasting and saturated soil, de-watering, including wedging out rocks where blasting work is prohibited, chiseleing or any other mixed variety of soil, de-watering and/or removal of slush and incidentals, lift upto any heights, stacking the excavated soil clear from the edge of excavation and then retuning the stacked soil in 15cm (Fifteen centimetre)layers, when required into plinths, sides of foundation etc; consolidating each deposited layer by ramming, watering and then disposing of all excavated earth, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal one five milimetre) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five milimetre), so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in flat surfaces such as soffits of suspended floors roofs, landings as per Architectural drawing and the like floor etc. as per the entire satisfaction and direction of Engineer – in- Charge including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal one five millimetre) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetre), so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in beams cantilevers girders and lintels sides and soffits of beams, beam haunchings, cantilevers bressumers and lintels upto all depths as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal one five millimeters) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimeters), so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in circular or curved in plan as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal one five millimeters) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimeters), so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in vertical surfaces such as walls (any thickness) partitions and the like including attached pillasters, buttresses plinth and string courses and the like as per the entire satisfaction and direction of Engineer – in- Charge including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal fifteen millimeters) thick, welded with angle iron in frames of 30x30x5mm(Thirty into Thirty into Five millimeters), so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights and removal of the same for in-situ reinforced plain concrete work in work in edge of slab and breaks in floors and walls under any thickness as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

Providing and laying cement concrete 1:6:12 (One cement isto Six sand isto Twelve graded broken/crushed stone aggregate 40mm (Forty milimetre) nominal size mechanically mixed and curing complete excluding cost of forms work in foundation and plinth under floor, as per specification, approved drawing, design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

Providing and laying cement concrete work of grade M-20 (M- twenty) design, mix to obtain the minimum compressive strength of 20N/mm2 (Twenty newton per Square milimetre) with cement contents not less than 320 kg (Three hundred twenty kilogram) per cubic metre, mechanically mixed and vibrated including curing complete, excluding cost of form work and reinforcement for reinforced concrete work in suspended floors, roofs, landings, shelves their supports balconies, beams, girder, bressumers and cantilevers, in all depth / thickness upto all floor levels as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

Providing and laying damp proof course 38mm ( thirty eight milimetre) thick with cement concrete 1:2:4 (1 cement isto 2 sand isto 4 stone aggregate 12.5mm ( twelve decimal five milimetre) nominal size) and curing complete as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

Applying a coat of hot bitumen mexphalt 80/100 (Eighty/Hundred) or equivalent using 1.70 Kgs. (one decimal seventy Kilogram’s) per square metre on Damp Proof Course after cleaning the surface with a piece of cloth lightly soaked in kerosene oil; as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

Providing Tor steel reinforcement for reinforced cement concrete work including bending, binding, straighting, cutting and placing in position complete including cost of binding wires complete and other incidentals due for its completion for all floors as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

Second class brick work using common burnt clay building bricks in super structure upto any floor level in cement mortar 1:6 (One cement isto Six sand) first floor level as per specification, approved drawing, design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

Second class half brick masonry in common burnt clay building bricks in super-structure above plinth level upto all floor level in cement mortar 1:4 (One cement isto Four sand) and curing complete as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

Stone filling in plinth with approved quality under floor including watering, ramming, consolidating and dressing complete as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

Providing and laying cement concrete work of grade M-20 (M- twenty) design, mix to obtain the minimum compressive strength of 20N/mm2 (Twenty newton per Square milimetre) with cement contents not less than 320 kg (Three hundred twenty kilogram) per cubic metre, mechanically mixed and vibrated including curing complete, excluding cost of form work and reinforcement for reinforced concrete work in columns, pillars posts and struts in all depth / thickness upto all floor levels for all floors heights as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

Providing and laying cement concrete work of grade M-20 (M- twenty) design mix to obtain the compressive strength of 20N/mm2 (twenty newton per square millimeter) with cement contents not less than 330 kg (Three hundred thirty kilogram) per cubic meter to give an smooth surfaces mechanically mixed and vibrated including curing complete, excluding cost of form work and reinforcement for reinforced concrete work in Walls (any thickness but not less than 0.10 ( Zero decimal ten ) metre thickness including attached pilasters buttersses,plinth and string courses etc. from top of foundation upto floor two level as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

Random rubble masonry/polygonal rubble masonry (uncoursed/brought to courses) with hard stones of approved quality in foundation and plinth including leveling up with cement concrete 1:6:12 (One cement isto Six sand isto Twelve graded crushed stone aggregate 20mm (Twenty milimetre) nominal size) at plinth level in cement mortar 1:6 (One cement isto Six sand) complete, as per specification, approved drawing, design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

Providing (Sal wood) woodwork in frames of doors, windows , clerestory, windows and other frames wrought,framed and fixed in position.as per specification, approved drawing, design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

Providing and fixing second class deodar wood panelled glazed or panelled and glazed shutters for doors windows and clerestory windows. Including black enamelled iron butt hinges with necessary screws as per specification, approved drawing, design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

Providing and fixing 40mm (Forty milimetres) thick second class deodar wood wire gauge shutters using galvanized M.S. wire gauge of IS gauge designation 85 G with wire of 0.56mm (Zero decimal five six milimetres) diameters for doors, windows and clerestory windows including bright finished /black enameled iron hinges with screws as per specification, approved drawing, design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

Providing and fixing M.S. Plain grills of required patterns in wooden frames of windows etc. with M.S. Flats, square or round bars with round headed bolts and nuts or by screws. as per specification, approved drawing, design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

Providing 40x3 mm ( forty into three millimetre) flat iron hold fast 40cm.( forty centimetres) Long including fixing to frame with 10mm diameter bolts & nuts and wooden plugs and embeding in cement concrete block 30x10x15cm ( thirty into ten into fifteen centimetres) 1:3:6 ( 1 cement : 3 sand: 6 graded stone aggregate 20mm ( twenty millimetre) nominal size as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

Providing and fixing 300x16mm (Three hundred into Sixteen milimetres) size Pilot/sheel or equivalent anodized aluminium sliding door bolts anodized transparent or dyed to required colour and shade with necessary screws etc. as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

Providing and fixing 250x10mm(Two hundred fifty into Ten milimetre) size anodized aluminium Tower bolts (Barrel type) anodized transparent or dyed to required colour and shade with necessary screws etc. completed as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

Providing and fixing 125mm (One hundred twenty five milimetres) size aluminium handles anodized transparent or dyed to required colour and shade with necessary screws etc, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

Providing and fixing 200mm (Two hundred milimetres) size anodized M.S. hooks and eyes complete within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and laying spartic ceramic tiles 5.5mm (Five decimal Five milimetres) thick in flooring 300x300cm (Three hundred into Three hundred centimetres) size of NITCO/RAK/Kajaria/Johnson/ Orient & Bell shade and sample in treads of steps laid on a bed of 12mm (Twelve milimetres) thick cement mortar 1:3 (One cement : three sand) jointing with cement slurry mixed with pigment to matlch the shade of tiles as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

Providing and laying 30x45cm (Thirty into Forty five centimetres) of Orient/Bell/RAK white glazed tiles 6mm (Six milimetre) thick in dado or skirting laid on a bed of 12mm (Twelve milimetre) thick cement mortar 1:3 (One cement isto Three sand) finished with flush pointing in white cement complete upto all floor level as per specification, approved drawing, design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

Providing and fixing M.S Flan clamps of type - I of 16mm ( sixteen milimetre) dia M.S Barbent to shape with hocked ends to R.C.C. slab during laying including painting the exposed portion of loop, as per specification, approved drawing, design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

Applying priming coat over new wood and wood based surfaces after and including prepering the surface by thoroughly cleaning oil,grease,dirt and other foreign matter) sand papering and knotting with ready mixed paint brushing wood primer pink as per specification, approved drawing, design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

Painting two coats (excluding coat) on new wood and wood based surface with enamel paint to give an even shade including cleaning the surface of dirt,dust and other foreign matter,sand papering & stoping as per specification, approved drawing, design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

6mm (Six milimetres) thick cement plasters to ceiling with cement mortar 1:3 (One cement isto Three sand) for all heights as per specification, approved drawing, design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

15mm (Fifteen milimetre) thick cement plaster in single coat on rough side of brick/concrete/stone walls for interior plastering upto all floor levels including arises internal rounded angles, chamfers and or rounded angles not exceeding 80mm (Eighty milimetre) in girth and finished even and smooth with cement mortar 1:6 (One cement isto six sand) as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

15mm (Fifteen milimetres) thick cement plaster in single coat on fair side of brick/concrete/ stone walls for interior plastering upto all floor levels including arises internal rounded angles, chamfers and or rounded angles not exceeding 80mm (Eighty milimetres) in girth and finished even and smooth with cement mortar 1:6 (One cement: six sand) as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

Cement concrete flooring 1:2:4 (1 cement isto 2 sand isto 4 graded stone aggregate 20 mm nominal size) laid in one layer finished with a floating coat of neat Cement 40mm ( forty milimetre) thick as per specification, approved drawing, design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

Providing 20mm (Twenty milimetres) thick cement plaster skirting (upto any hgiehts) with cement mortar 1:3 (One cement : Three sand )finished with a floating coat of neat cement including rounding of junction with floor as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

Distempering (two or more coats) with acrylic oil bound washable distemper with Nerolac/ Asian of approved brand and manufacture and of required shade on undecorated wall surfaces soffits of slab to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth above plinth level to floor two level as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

Finishing wall with water proofing cement paint of approved brand and manufacture and of required shade on decorated wall surfaces (two coat) to give an even shade after thoroughly brushing the surface to remove all dirt,loose or softened paint. as per specification, approved drawing, design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

Providing plinth protection 50mm (Fifty milimetre) thick cement concrete 1:3:6 (One cement isto Three sand isto Six graded crushed stone aggregate 20mm (Twenty milimetre) nominal size including finishing the top surfaces of concrete smooth as per direction of Engineer-in-Charge. including carriage of materials within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing under layer for plinth protection of 75mm (Seventy five milimetre) thick(un-consolidated)bed of dry brick/stone aggregate 40mm (Forty milimetre) nominal sizes well rammed, consolidated and grouted with fine sand including preparation of ground as per direction of Engineer-in-Charge. including carriage of materials within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Rajesh

SUNIL KUMAR & BROS.

Kapil Sharma

Onkar Chand

Ashok Kumar