REPAIR MAINTENANCE OF STREET LIGHTS SECURITY LIGHTS, POST TOP AND GARDEN LIGHTS, HIGH MAST LIGHTS AND CONNECTED WORKS AT RESIDENTIAL AREA OF NPOL KOCHI

Amount

Repair to street light/flood light of any type, any description mounted on pole/ Roof/ wall ,disconnecting electrically, testing of all components to ascertain defective parts of the fitting and testing the conductivity of electric cable of internal wiring of the fittings, dismantling of defective components and testing the fitting after replacement of defective components and cable of internal wiring and making the fitting fully functional testing complete.

All as per Ser item No 1.00 above but post top / Bollard light

NOTES FOR ITEM No. 1 & 2 i) Cost of the driver, cables will not be included in quoted rates, which will be paid separately under respective item as supply only. ii) Scope of work includes for minor stores i.e. PVC insulation tapes, screws, insulation sleeves, nuts, bolts, washers and flexible cable 23/0.0076 (for internal wiring) etc as required at site.

Repair to high mast light fitting mounted on up to 16 mtr height structure of qty 09 to 12 light fitting , lowering disconnecting electrically, testing of all components to ascertain defective part of the fitting and testing the conductivity of electric cable of internal wiring of the fittings, dismantling of defective components, testing the fitting after replacement of defective components and making the fitting fully functional finally entire unit to be raised upto its original level complete. (The necessary components shall be measured and paid separately)

S&F following LED street light luminaries with pressure die cast aluminium housing , Heat resistant toughened glass with frame and IP 66 protection for following wattage including taking down existing unserviceable HPSV/MH fitting from from Steel /PCC pole up to 9.00 Mtrs height or from wall complete all as specified and as directed. Note: Height of new fitting should adjusted to achieve better illumination level so as to match with LED fittings as directed.

LED fitting 45 Watt :Make: ENDURASUNDOWNSL45WLED765PASYBOPC of havells or equivalent in Havells/Jaquar/Philips/Luker/GM

LED fitting 60 Watt with minimum 10 KV SPD and 110 lum/Watt Efficacy: Make:Crompton Cat part No CRP-409-60-57-SL-GL-NSG or equivalent in Havells/Jaquar/Philips/ Luker/GM

LED fitting 90 Watt minimum 10 KV SPD and 110 lum/Watt Efficacy:: Make:Crompton Cat part No CRP-411-90-57-SL-GL-NSG or equivalent in Havells/Jaquar/ Philips/ Luker/GM

S & F cable 3 core PVC insulated unsheathed multistranded copper conductor of size 1.5 Sq mm in replacement passing through PVC conduit from junction box to light fitting complete all as directed. (for street lights/ flood ligts) Make: Finolex/Polycab/Havell's Note: PVC conduit is measured and paid separately.

S & F rigid PVC non metallic conduit 20mm dia on pole with necessary bend Elbow, couplers, check nuts, FI clamp 40 x 4 mm poles and nuts & bolts, PVC flexible conduit, connected to junction box to fitting etc in replacement complete all as directed by Engineer-in-Charge including painting to clamps. Make: Precision Finolex/Prestoplast/Modis

S & F following LED flood light with high pressure die cast housing IP 66 protection for area lighting for following wattage with necessary fixing arrangement on pole/Wall with suitable size MS clamp , nuts & bolts, for lights complete including taking down old unserviceble fitting of any type and depositing to store for credit all as directed by Engineer-in-Charge.

LED flood light fitting 100 Watt 110/120 LPW efficacy, minimum 10KV SPD . Crompton Cat part No TFS-504-100-57-60D-SL-GL-NSG or equivalent in Havells/Philips/ Jaquar/Luker/GM

LED flood light fitting 200 Watt, 110/120 LPW efficacy, minimum 10KV SPD .Make: Crompton Cat part No TFS-507-200-57-60D-SL-GL-NS or equivalent in Havells/Jaquar/Philips/Luker/GM

S & F post top luminaire die cast housing and clear acrylic and spun aluminium reflector of IP 65 protection , resistance to corrosion of 40 Watt with LED lamp with all fixing arrangements fixed to post top complete including taking down old unserviceable fitting of any type and depositing to store for credit all as directed by Engineer-in-Charge. Make: Crompton Cat part No. LPTO-40-CDL-M Equivalent in Havells/ Philips/ Luker/ GM .

S & F Bollard luminaire die cast housing and clear acrylic of IP 65 protection Inverted Tripod type , resistance to corrosion of 10 Watt with LED lamp with all fixing arrangements fixed with soft 360 deg light distribution complete including taking down old unserviceable fitting of any type and depositing to store for credit all as directed by Engineer-in-Charge. Make: Crompton Cat part No. LBLSN-10-CDL Equivalent in Havells / Philips/ Luker

S&F bracket for fixing to street light poles, made out of 50 mm bore medium grade GI pipe bend to shape inclusive of one primer coat, one under aluminium coat and one aluminium finishing coat of paint all as directed by the EIC.Make: TATA/Jindal/Surya.

S & F junction box transparent type readymade of size 168 x 253 x 115 mm with aluminium bus bar of 50 Amp capacity for RYB and half for neutral made in suitable size fixed inside the junction box with necessary supporting insulators fixed on hylem sheet ,MS sheet steel fixed inside the bottom portion of box to connect the cable gland complete , entire assembly fixed to pole /Wall with MS clamp 25 X 5 mm and nuts & bolts, or inside the Copping of pole /Post top including MCB SP 6 Amp 10 KA 240 V - 1 No, with necessary size copper lugs for connecting cables from junction box to fittings complete all as directed by Engineer-in-Charge . Make: Hensel/Sintex

M&L for PCC 1:4:8 type D2 40 mm graded aggregate complete for foundations for post top lantern /PCC/Tubular at road crossing etc, complete all as directed by Engineer-in-Charge.

M&L for PCC 1:3:6 type C1, 20 mm graded aggregate in coping of pole for post top lantern complete all as directed by Engineer-in-Charge.

Supply only driver as per sample for outdoor type LED fitting of following watt complete all as specified and as directed

LED driver 10 Watt

LED driver 40/45 Watt

LED driver 60/75 Watt

LED driver 90/100 Watt

LED driver 120/150 Watt

Supply and fix in replacement power contactors for street light after dismantling existing contactors from panel and connecting new contactors and making connection with incoming and outgoing MCCB/MCB complete all as specified and as directed for following ratings . Make: L & T /Indo Asian/Legrand

2 pole Power contactors 40 Amp.

3 pole Power contactors , 40 Amp

4 pole Power contactors , 80 Amp

Supply and fix in replacement of Analogue/Digital Time Switch daily programmed 1 segment=15 minutes accuracy : ± 5 minutes Make: GIC /Havells/Legrand/ L & T.

M & L for painting of PCC pole with cement base paint one coat suitable for outdoor including cleaning of poles removing creeper etc from pole as specified and as directed .Make: Asian Paints ./Nerolac etc

Material and labour for painting Steel Tubular Poles (Swaged Type) For Street Lighting of height maximum up to 15 Mtr single dome type up to light fitting complete including two coat of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed .

M&L for writing pole numbers on pole both PCC and steel tubular pole with super enameled synthetic paint of any colour including dgits and alphabets all as directed including with letter height of 75 mm All as directed .Note: Colour of letters and back ground is as directed.

M & L for cutting the tree branches at a distance not exceeding 3.0 Mtrs away from Street light poles /fitting incl removing the creeper which surrounded the poles and street lights , roof top of E/M Installation of G+0 Building of tree branch size up to 50 mm dia as directed and deposited the removing branches at a distance not exceeding 100 Mtrs from Road /Path.

M&L XLPE 4 core 16 sqmm insulated, armoured, heavy duty electric cable with aluminum conductor, 1100 Volts grade, in trenches/fixed on wall complete completed all specified and directed by Engineer-in-Charge.

Excavation in trenches not exceeding 1.5 mtr deep and 1.5 mtr width as in Hard/dense soil complete all as specified and as directed by Engineer - in - Charge.

Returning filling incl leveling watering and well ramming in layer not exceeding 25 cm thick complete all as specified and as directed by Engineer - in - Charge

Removal of surface soil to a distance n.exc 50 m and deposited where directed at a level n. exc 1.5 m above the starting point complete all as specified and as directed by Engineer - in - Charge.

S & L for Riddled earth for cushioning for cable protection in trenches 8 cm before laying cable and 15 cm deep over the cable complete. (Note: Punned thickness shall be taken for measurement)

M & L for laying Bricks, common burnt clay building sub-class 'B' old size bricks for protection of cable in trenches complete all as directed by Engineer-in-Charge.

Dismantling of Unserviceable Pre-stressed concrete poles/ steel poles of any size & shape including necessary excavation and earth work, taking out of embedded portion of poles from concrete after necessary demolition of cement concrete foundation and disposal of same complete all as specified and directed. Note : Excavation & earthwork, returning filling removing of surplus soil and demolition of concrete and disposed of the demolished concrete shall deemed to be included in the unit rate quoted by the tenderer.

Supply, erecting & fixing steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts & screws as specified type 410 SP - 31 (8.5 metres long), complete all as specified and directed. Note: (i) Earthwork, cement concrete, etc. will be measured and paid separately under relevant items of this schedule. (ii) Excavation & earth work shall only be measured in case location is other than item No. 27

S&F in repairs street light timer panel with contactor and timer Digital type , 3 phase 6KW, with minimum 32 Amps contactor rating with IP 54 protection internally pre-wired with FRLS cables and inbuilt short circuit protection fixed on the ground/wall with necessary clamps etc. The Excavation and PCC if required shall be considered included in the rate quoted.

ROTECH ENGINEERS AND BUILDERS

AR Traders

ZOOM ENTERPRISES