Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.9 LAdmitted-Finance | L1 | Admitted-Finance | |
| 2 | L2₹1.9 L+₹7,292.50 (3.91%)Admitted-Finance | L2 | Admitted-Finance | |
| 3 | L3₹2.1 L+₹21,195 (11.4%)Admitted-Finance VILLAGE NIRMAND P O NIRMAND TEHSIL NIRMAND DISTT KULLU HP | SHIMLA | HIMACHAL PRADESH | 172001 | L3 | Admitted-Finance |
| Sl No | Description | Qty | Unit | MUKESH SHARMA L1 | Kul Bhushan Sharma L3 | RAHUL SHARMA L2 |
|---|---|---|---|---|---|---|
| 1.00 | Excavation in foundation and trenches (For pipes and pits) up to all depths and in all classification of each work such as pick work, jumper work, saturated soil including bailing or pumping out of water, blasting soft or hard rock or chiselling or wedging out of soft/ hard rock, where blasting is prohibited, in all lifts including trimming and dressing of sides, levelling of beds to correct grade including shoring, strutting, planking, timbering and dewatering where ever required. Stacking usable and unusable material/ soil separately and after laying, jointing and testing of pipes, returning the usable soil in 15cm layers by ramming and watering and then disposing of all surplus excavated soil/ unusable material as directed within all leads/ lifts including restoration of unmetalled surfaces to its original condition and including cost of diversion for traffic, night signal boards, fixing caution boards, crossing over trenches for access to houses, fencing etc. complete in all respect with in all leads and lifts as per direction of Engineer-in-Charge. Pick & Jumper work | 19.5 | Cum | 400 ₹7,800 Lowest | 410 ₹7,995 | 415 ₹8,092.5 |
| 2.00 | Dismantling of flanged MS Pipe including dislodging of flanged joints by opening of nuts and bolts & synthetic rubber gasket without any damage complete with storing of the same for future use within all leads and lifts complete in all respect and to the entire satisfaction of Engineer in charge with in all leads and lifts 250 mm dia | 50 | Rmt | 105 ₹5,250 Lowest | 114 ₹5,700 | 115 ₹5,750 |
| 3.00 | Dismantling of butt welded MSERW pipe of following dia meters confirming to confirming to BIS 3183-2007, steel grade & wall thickness including specials, short pieces, bends, reducers, tees etc. made from parent tube. Dismantling of pipe will include all operation such as cutting of joints, bends, tees etc. The rates also includes entire carriage of material, cleaning complete to the best satisfaction & directin of Engineer in charge with in all leads and lifts 250 mm dia | 250 | Rmt | 110 ₹27,500 Lowest | 559 ₹1,39,750 | 112 ₹28,000 |
| 4.00 | Relaying jointing, with circumferential butt joints by electrical arc welding (Welding thickness shall be equal to pipe wall thickness) and testing of MSERW pipe having wall thickness as specified below capable of withstanding required test pressure, including manufacturing and fabrication of reducers taper all shorts pieces, bends etc as per site requirement made from parent tubes and all operation such as cutting welding and jointing fabrication of bends tees le lowering and laying in excavated trench to ensure required level including flushing cleaning and hydraulic testing complete in all respect to the entire satisfaction of the Engineer in charge. The fabricated bends shall have three or four cuts having its radius not less than five times the dia of pipe. The welding electrodes shall be as per IS 814 of Advani Overlikon/Over cord s/s make. The damaged portion of the pipe and all specials (if damaged during laying and jointing operation of pipe) made from the parents tube shall be provided anticorrosive treatment with liquid zinc sparay. The rates also includes entire carriage of material, flushing, Cleaning and Hydraulic testing, DP test of butt welded joints complete in all respect and to the entire satisfaction of Engineer in charge with in all leads and lifts 250 mm dia | 250 | Rmt | 550 ₹1,37,500 | 181 ₹45,250 Lowest | 570 ₹1,42,500 |
| 5.00 | Relaying, jointing and testing in trenches MSERW pipe of following dia meters confirming to confirming to BIS 3183-2007, steel grade & wall thickness as specified below with plain end and capable of withstanding required test pressure in random length of 4 to 7 meters, including specials, short pieces, bends, reducers, tees etc. made from parent tube, providing and welding of MS flanges. The MS flanges shall confirm to BIS 6392-1971 (with latest up to date amendments) duly welded in two layers (two inner and two outer) with pipes at both ends as per relevant BIS standards along with nuts and bolts of required sizes, 3mm thick compressed asbestos fiber/synthetic rubber gaskets confirming to relevant BIS standards. The laying of pipe will include all operation such as cutting, welding, jointing, providing & fixing of MS flanges, fabrication of bends, tees etc. including lowering and laying in excavated trenches to ensure required level including flushing, cleaning and hydraulic testing complete in all respects to the satisfaction of the Engineer in charge. The fabricated bends shall have three or four cuts having its radius not less than five times the dia of pipe. The pipes shall be factory galvanized (zinc coating both inside and outside) as per relevant IS standards and the damaged portion of the pipes and specials made form the parent tube shall be provided anticorrosive treatment by applying two coats of anticorrosive bituminous paint over a priming coat as per AWWA specifications C-203-1978. The welding electrodes shall be as per IS 814 of Advani Oerlikon/ L&T or ISI marked make. The rates also includes entire carriage of material, flushing, cleaning & hydraulic testing complete to the best satisfaction & directin of Engineer in charge with in all leads and lifts. 250 mm dia | 50 | Rmt | 170 ₹8,500 Lowest | 181 ₹9,050 | 190 ₹9,500 |
Tender Value
₹1.9 L
EMD Value
₹3,794
Closing Date
10 Oct 2025, 5:00 pmClosed
E.E. JSV Division Anni
E.E. JSV Division Anni
SH Dismantling/Relaying of MSERW Butt welded and flanged pipe 250 mm dia in gravity main).
2025_HPIPH_116483_1
6622-72
Open Tender
Civil Works
Item Rate
60 days
Nither
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
₹3,794
21 Nov 2025
1 Oct 2025
13 Oct 2025
1 Oct 2025
10 Oct 2025
1 Oct 2025
Amount
Excavation in foundation and trenches (For pipes and pits) up to all depths and in all classification of each work such as pick work, jumper work, saturated soil including bailing or pumping out of water, blasting soft or hard rock or chiselling or wedging out of soft/ hard rock, where blasting is prohibited, in all lifts including trimming and dressing of sides, levelling of beds to correct grade including shoring, strutting, planking, timbering and dewatering where ever required. Stacking usable and unusable material/ soil separately and after laying, jointing and testing of pipes, returning the usable soil in 15cm layers by ramming and watering and then disposing of all surplus excavated soil/ unusable material as directed within all leads/ lifts including restoration of unmetalled surfaces to its original condition and including cost of diversion for traffic, night signal boards, fixing caution boards, crossing over trenches for access to houses, fencing etc. complete in all respect with in all leads and lifts as per direction of Engineer-in-Charge. Pick & Jumper work
Dismantling of flanged MS Pipe including dislodging of flanged joints by opening of nuts and bolts & synthetic rubber gasket without any damage complete with storing of the same for future use within all leads and lifts complete in all respect and to the entire satisfaction of Engineer in charge with in all leads and lifts 250 mm dia
Dismantling of butt welded MSERW pipe of following dia meters confirming to confirming to BIS 3183-2007, steel grade & wall thickness including specials, short pieces, bends, reducers, tees etc. made from parent tube. Dismantling of pipe will include all operation such as cutting of joints, bends, tees etc. The rates also includes entire carriage of material, cleaning complete to the best satisfaction & directin of Engineer in charge with in all leads and lifts 250 mm dia
Relaying jointing, with circumferential butt joints by electrical arc welding (Welding thickness shall be equal to pipe wall thickness) and testing of MSERW pipe having wall thickness as specified below capable of withstanding required test pressure, including manufacturing and fabrication of reducers taper all shorts pieces, bends etc as per site requirement made from parent tubes and all operation such as cutting welding and jointing fabrication of bends tees le lowering and laying in excavated trench to ensure required level including flushing cleaning and hydraulic testing complete in all respect to the entire satisfaction of the Engineer in charge. The fabricated bends shall have three or four cuts having its radius not less than five times the dia of pipe. The welding electrodes shall be as per IS 814 of Advani Overlikon/Over cord s/s make. The damaged portion of the pipe and all specials (if damaged during laying and jointing operation of pipe) made from the parents tube shall be provided anticorrosive treatment with liquid zinc sparay. The rates also includes entire carriage of material, flushing, Cleaning and Hydraulic testing, DP test of butt welded joints complete in all respect and to the entire satisfaction of Engineer in charge with in all leads and lifts 250 mm dia
Relaying, jointing and testing in trenches MSERW pipe of following dia meters confirming to confirming to BIS 3183-2007, steel grade & wall thickness as specified below with plain end and capable of withstanding required test pressure in random length of 4 to 7 meters, including specials, short pieces, bends, reducers, tees etc. made from parent tube, providing and welding of MS flanges. The MS flanges shall confirm to BIS 6392-1971 (with latest up to date amendments) duly welded in two layers (two inner and two outer) with pipes at both ends as per relevant BIS standards along with nuts and bolts of required sizes, 3mm thick compressed asbestos fiber/synthetic rubber gaskets confirming to relevant BIS standards. The laying of pipe will include all operation such as cutting, welding, jointing, providing & fixing of MS flanges, fabrication of bends, tees etc. including lowering and laying in excavated trenches to ensure required level including flushing, cleaning and hydraulic testing complete in all respects to the satisfaction of the Engineer in charge. The fabricated bends shall have three or four cuts having its radius not less than five times the dia of pipe. The pipes shall be factory galvanized (zinc coating both inside and outside) as per relevant IS standards and the damaged portion of the pipes and specials made form the parent tube shall be provided anticorrosive treatment by applying two coats of anticorrosive bituminous paint over a priming coat as per AWWA specifications C-203-1978. The welding electrodes shall be as per IS 814 of Advani Oerlikon/ L&T or ISI marked make. The rates also includes entire carriage of material, flushing, cleaning & hydraulic testing complete to the best satisfaction & directin of Engineer in charge with in all leads and lifts. 250 mm dia
RAHUL SHARMA (BID ID -567033)
Kul Bhushan Sharma (BID ID -568102)
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .