PROPOSED SUB CENTRE AT KHARVASA TA: CHORYASI, DIST : SURAT.

Item No. Quantity Unit Amount

Reference to Book of Specifications) Figures

1 Excavation for foundation upto 1.5 m depth including 154.00 CMT. 122.93

sorting out and stacking of useful materials and

disposing off the excavated stuff upto 50 Meter lead. (A)

Loose or soft soil ( I ) 0 To 1.5 mt. Depth

2 Excavation for foundation upto 1.5 m to 3.0 m depth 127.50 CMT. 136.47

including sorting out and stacking of useful

materials and disposing off the excavated stuff upto

Meter lead. (A) Loose or soft soil ( II ) 1.5 To 3.0 MT

3 Filling available excavated earth (Including rock in 236.50 CMT. 136.91

trenches plinth, sides of foundations etc. in layers not

exceeding 20 cm. in depth consolidating each deposited

layer by ramming and watering)

4 Providing & filling in plinth with murrum or yellow soil 167.50 CMT. 301.77

watering, ramming & consolidation etc. complete.

5 Filling in plinth with sand under floors including 10.50 CMT. 481.80

watering ramming, consolidating and dressing

complete (A) Foundation and plinth

6 Providing and filling rubbles including hand packing 25.00 CMT. 1094.11

and filling interstices with quarry spalls behind

abutments and between returns as directed.

7 Providing and laying cement concrete 1:2:4 (1-Cement : 22.50 CMT. 3923.85

2- coarse sand : 4- hand Machine crushed stone

aggregates 40 mmnominal size) and curing complete

including cost of formwork in (A) PCC

8 Providing and laying controlled cement concrete M.250 30.00 CMT. 4494.50

and curing complete inculding the cost of formwork

but Excluding the cost of reinforcement for reinforced

concrete work in foundation, footings base of column

and mass concrete. (A) Footing

9 Providing and laying controlled cement concrete M.250 6.50 CMT. 8226.45

and curing complete inculding the cost of formwork

but Excluding the cost of reinforcement for reinforced

concrete work in All Types of Column D) Column,

Pillers, posts and struts , upto Plinth

10 Providing and laying controlled cement concrete M.200 6.00 CMT. 8191.10

and curing complete inculding the cost of formwork

but Excluding the cost of reinforcement for reinforced

concrete work in All Types of Column D) Column,

Pillers, posts and struts, upto Ground Floor

11 Providing and laying controlled cement concrete M.200 6.00 CMT. 8232.05

and curing complete inculding the cost of formwork

but Excluding the cost of reinforcement for reinforced

concrete work in All Types of Column D) Column,

Pillers, posts and struts, upto First Floor

SHEDULE B Page

Description of Item (With brif Specification And Rate in

Item No. Quantity Unit Amount

Reference to Book of Specifications) Figures

12 Providing and laying controlled cement concrete M.200 4.00 CMT. 8308.36

and curing complete inculding the cost of formwork

but Excluding the cost of reinforcement for reinforced

concrete work in All Types of Column D) Column,

Pillers, posts and struts, upto Terrace Floor

13 Providing and laying controlled cement concrete M.250 13.00 CMT. 6440.77

and curing complete inculding the cost of formwork

but Excluding the cost of the cost of reinforcement for

reinforced concrete work in Beams. (E) Beam, upto

14 Providing and laying controlled cement concrete M.200 6.50 CMT. 6406.43

and curing complete inculding the cost of formwork

but Excluding the cost of reinforcement for reinforced

concrete work in All Types of Beams,(E) Beam, Ground

15 Providing and laying controlled cement concrete M.200 6.50 CMT. 6447.38

and curing complete inculding the cost of formwork

but Excluding the cost of reinforcement for reinforced

concrete work in All Types of Beams,(E) Beam, First

16 Providing and laying controlled cement concrete M.200 2.50 CMT. 6488.34

and curing complete inculding the cost of formwork

but Excluding the cost of reinforcement for reinforced

concrete work in All Types of Beams,(E) Beam, Terrace

17 Providing and laying controlled cement concrete M.200 7.00 CMT. 6351.89

and curing complete inculding the cost of formwork

but Excluding the cost of reinforcement for reinforced

concrete work in All Types of Slab,All Thickness (C)

Slab upto Plinth and Ground Floor

18 Providing and laying controlled cement concrete M.200 6.00 CMT. 6392.84

and curing complete inculding the cost of formwork

but Excluding the cost of reinforcement for reinforced

concrete work in All Types of Slab,All Thickness (C)

Slab for First Floor

19 Providing and laying controlled cement concrete M.200 1.50 CMT. 6433.80

and curing complete inculding the cost of formwork

but Excluding the cost of reinforcement for reinforced

concrete work in All Types of Slab,All Thickness (C)

Slab for Terrace Floor

20 Providing and laying controlled cement concrete M.200 7.50 CMT. 6758.92

and curing complete inculding the cost of formwork

but Excluding the cost of reinforcement for reinforced

concrete work in All Thickness in Walls PARDI Ground

21 Providing and laying controlled cement concrete M.200 2.00 CMT. 5951.93

and curing complete inculding the cost of formwork

and Excluding reinforcement for reinforced concrete

work in All Types of Stair case upto Ground Floor

SHEDULE B Page

Description of Item (With brif Specification And Rate in

Item No. Quantity Unit Amount

Reference to Book of Specifications) Figures

22 Providing and laying controlled cement concrete M.200 2.00 CMT. 5992.88

and curing complete inculding the cost of formwork

and Excluding reinforcement for reinforced concrete

work in All Types of Stair case upto First Floor

23 Providing and laying controlled cement concrete M.200 1.50 CMT. 5949.91

and curing complete inculding the cost of formwork

but Excluding the cost of reinforcement for reinforced

concrete work in Lintel upto Ground Floor

24 Providing and laying controlled cement concrete M.200 1.50 CMT. 5990.86

and curing complete inculding the cost of formwork

but Excluding the cost of reinforcement for reinforced

concrete work in Lintel upto First Floor

25 Providing and laying controlled cement concrete M.200 0.50 CMT. 6031.82

and curing complete inculding the cost of formwork

but Excluding the cost of reinforcement for reinforced

concrete work in Lintel upto terrace Floor

26 Providing and laying controlled cement concrete M.200 2.00 CMT. 5738.82

and curing complete inculding the cost of formwork

but Excluding the cost of reinforcement for reinforced

concrete work in Chajja. Upto Ground Floor

27 Providing and laying controlled cement concrete M.200 2.00 CMT. 5779.77

and curing complete inculding the cost of formwork

but Excluding the cost of reinforcement for reinforced

concrete work in Chajja. Upto First Floor

28 Providing and laying controlled cement concrete M.200 0.50 CMT. 5820.73

and curing complete inculding the cost of formwork

but Excluding the cost of reinforcement for reinforced

concrete work in Chajja. Upto Terrace Floor

29 Providing and fixing TMT bars Fe-500D steel 14484.00 Kg . 77.74

reinforcement for R.C.C. work including binding,

bending and placing in position complete upto floor two

level ,Ground Floor, First Floor , Second Floor, Third

Floor, Terrace Floor (all floor).

30 Applying general insecticide pest control treatment to 68.00 SMT. 91.62

floors, cupboards etc including labour material etc.

complete. Using Heptachloride 20 EC. As Per

6113_pests Consentration Weight 0.50 percent is

recommended one litre chemical emulsion dillute with

31 Brick work using common brunt clay building bricks 13.50 CMT. 4214.32

having crushing strength not less than 35 kg/sqcm. in

foundation and plinth in cement mortar 1:6 (1 cement :6

fine sand) etc.comp. (B) Conventional Ground floor

upto Plinth

32 Brick work using common brunt clay building bricks 23.00 CMT. 4503.04

having crushing strength not less than 35 kg/sqcm. in

superstructure above plinth level upto floor two level in

cement mortar 1:6 (1 cement :6 fine sand) etc.comp. (B)

Conventional Ground Floor

SHEDULE B Page

Description of Item (With brif Specification And Rate in

Item No. Quantity Unit Amount

Reference to Book of Specifications) Figures

33 Brick work using common brunt clay building bricks 22.00 CMT. 4545.16

having crushing strength not less than 35 kg/sqcm. in

superstructure above plinth level upto floor two level in

cement mortar 1:6 (1 cement :6 fine sand) etc.comp. (B)

Conventional First Floor

34 Brick work using common brunt clay building bricks 13.50 CMT. 4587.27

having crushing strength not less than 35 kg/sqcm. in

superstructure above plinth level upto floor two level in

cement mortar 1:6 (1 cement :6 fine sand) etc.comp. (B)

Conventional Terrace Floor

35 Half brick masonry in common brunt clay building 19.00 SMT. 685.65

bricks having crushing strength not less than

Kg/Sq.Cm. in Cement mortar 1:4 (1- Cement : 4 -coarse

sand ) in (B) Conventional Ground Floor

36 Half brick masonry in common brunt clay building 29.50 SMT. 741.48

bricks having crushing strength not less than

Kg/Sq.Cm. in Cement mortar 1:4 (1- Cement : 4 -coarse

sand ) in (B) Conventional First Floor

37 Providing 15mm thick cement plaster in single coat on 186.00 SMT. 161.19

Rough (Similar)side of single or Full/half brick walls

for interior plastering upto floor two level and finished

even and smooth in (ii) Cement mortar 1:4 (1-cement :4-

sand) Ground Floor

38 Providing 15mm thick cement plaster in single coat on 195.50 SMT. 185.75

Rough (Similar)side of single or Full/half brick walls

for interior plastering upto floor two level and finished

even and smooth in (ii) Cement mortar 1:4 (1-cement :4-

sand) First Floor

39 Providing 15mm thick cement plaster in single coat on 60.50 SMT. 210.32

Rough (Similar)side of single or Full/half brick walls

for interior plastering upto floor two level and finished

even and smooth in (ii) Cement mortar 1:4 (1-cement :4-

sand) Terrace Floor

40 Providing & laying10 mm. thick cement plaster in 54.00 SMT. 148.31

single coat on fair side of ceilings for interior plastering

upto floor two level and finishing with smooth mala

plaster.(i) Cement mortar 1:4 (1 cement : 4 sand)

Ground Floor

41 Providing & laying10 mm. thick cement plaster in 54.00 SMT. 171.24

single coat on fair side of ceilings for interior plastering

upto floor two level and finishing with smooth mala

plaster.(i) Cement mortar 1:4 (1 cement : 4 sand) First

42 Providing & laying10 mm. thick cement plaster in 9.00 SMT. 194.17

single coat on fair side of ceilings for interior plastering

upto floor two level and finishing with smooth mala

plaster.(i) Cement mortar 1:4 (1 cement : 4 sand) Terrace

43 20mm thick sand faced cement plaster on walls upto 263.50 SMT. 315.68

height 10 metres above ground level consisting of

12mm thick backing coat of C.M. 1:3 (1-cement : 3-

sand) and 8mm thick finishing coat of C.M. 1:1 (1-

cement : 1-sand) etc. complete. Upto Ground Floor to

SHEDULE B Page

Description of Item (With brif Specification And Rate in

Item No. Quantity Unit Amount

Reference to Book of Specifications) Figures

44 Providing throating or plaster drip and moulding to 60.00 RMT. 44.27

R.C.C. Chhajja.

45 Providing and laying polished Granite Slab 18mm thick 18.00 SMT. 2377.54

in Flooring laid 20mm thick Cement Mortar 1:4 (1-

Cement : 4-Coarse Sand) and jointed with Grey Cement

Slurry including full molded round front edges , rubbing

and polishing etc. complete.

46 Providing and laying polished Granite Slab 18mm thick 56.50 SMT. 2408.85

in Risers of steps Dedo, window sill, jembs and pillars

laid 10 mm thick Cement Mortar 1:4 (1-Cement : 4-

Coarse Sand) and jointed with Grey Cement Slurry

including full molded round edges , rubbing an

47 Providing and laying Vitrified tiles 8 to 10 mm thick , 94.50 SMT. 1120.36

24'' x 24'' in flooring treads of steps and landing laid on

a bed of 12mm thick cement mortar 1:3 (1-cement : 3-

coarse sand ) finishing with flush pointing in white

cement.Soluble Salt PVT. Tiles in All Rooms.

48 Providing and laying Vitrified tiles 8 mm thick , 24'' x 76.50 SMT. 1195.02

24'' in skrting risers of steps and dedo on 10mm thick

cement plaster 1:3 (1-cement : 3-coarse sand) and

jointed with white cement slurry Soluble Salt PVT. Tiles

in All Rooms.

49 Providing and fixing 37 mm thick flush door both sides 16.50 SMT. 3767.30

laminated andshutter fabricated from 35 mm thick solid

core malemine faced three layered pre laminated flat

pressed wood based exterior grade bonded BWP/BWR

synthetic resin having stamped IS 12823 gra

50 Providing and fixing FRP frame size 125x65 mm and 8.50 SMT. 2615.04

35mm thick FRP shutter having extra reinforcement on

sides & edges in polish finish. The core of the shutter &

frame is to be filed up with injected polyurethene foam

done in situ alongwith embedded wooden pieces for

stiffening & also taking hinges & fintures. The whole

FRP frame & shutter is to be water proof weather proof,

termite proof & resistance to mild acid/alkali. Rates are

to be inclusive of S.S hinges with necessary screws &

alluminium S.S fixtures & fastenings & fastener sleeve.

51 Providing and fixing window having extruded aluminum 14.04 SMT. 1583.95

Colour anodized section frame main outer size 95mm x

24mm x 1.17mm @ wt.of 0.738 Kg/mt , horizontal

Three track member size 92mm x 31.75mm x

1.30mm,@ Wt.1.07 Kg/mt , vertical member of size

92mm x 31.75mm x 1.50mm @ Wt. 1.06 Kg/mt with

two sliding shutters of horizontal member size

mmx18mm x1.29mm @ wt.of 0.456 Kg/mt, vertical

member of size 40mm x 18mm x 1.29 mm @ wt.of

0.456Kg/mt/ with one mosquito net with 5 mm thick

transparent bronze colour tinted float glass with powder

coated aluminum fittings and fixtures and transparent

silicon sealant glass fixing to frame as per details etc

SHEDULE B Page

Description of Item (With brif Specification And Rate in

Item No. Quantity Unit Amount

Reference to Book of Specifications) Figures

52 Providing and fixing standared extruded of alluminium 3.00 SMT. 1175.55

section of size 63mm x 38.10mm x 1.2mm (Wt.

Kg/mt) with colour anodized alluminium frame for

ventilation with 5 mm thick frosted glass as details etc

complete for Ventilation

53 Providing and fixing M.S. grill of required pattern of 272.00 Kg. 117.16

windows etc. with M.S.. flats at required spacing and

frame alround square or round headed bolts and nuts or

by screws.including applying a priming coat of red lead

paint and two coats of oil painting

54 Applying two coats of Birla (white cement based) or 442.00 SMT. 130.64

(acrylic lapy- putty) or equivalent & two coats of primer

of approved brand and manufacture on new wall surface

to give an even shade including thoroughly brushing the

surface free from mortar dropping and other foreign

matter and sand papered smooth. with Wall painting

(three coats) with plastic emulsion paint of approved

brand and manufacture on undecorated wall surface to

give an even shade including throughly brushing the

surface free from mortar droppings and other foreign

matter and sand papered smooth.

55 Applying two coats of Birla (white cement based) or 117.00 SMT. 173.19

(acrylic lapy- putty) or equivalent & two coats of primer

of approved brand and manufacture on new Ceiling

surface to give an even shade including thoroughly

brushing the surface free from mortar dropping and other

foreign matter and sand papered smooth. Ceiling

painting (three coats) with plastic emulsion paint of

approved brand and manufacture on undecorated Ceiling

surface to give an even shade including throughly

brushing the surface free from mortar droppings and

other foreign matter and sand papered smooth.

56 Finishing wall with weather proof exterior emulsion 263.48 SMT. 166.65

paint on wall surface (two coats) to give an required

shape even shade after thoroughly brushing the surface

to remove all dirt, and remains of loose powdered

materials.etc complete. Priming: Apply a liberal coat of

exterior acrylic primer and allow it to dry for 4-5 hours.

Application of putty is not recommended. Minimum 4-6

hours duration is required between each coat of

weather shield max paint

57 Applying priming coat over new steel and other metel 6.50 SMT. 128.62

surface after and including preparing the surface by

throughly cleaning, oil,grease, dirt and other foreign

matter and scoured with brushes fine steel wood,

scrapers and sand paper with ready mixed priming paint

brushing red lead. and Painting two coats (excluding

priming coat) on new steel and other metal surface with

enamel paint, brushing, interior to give an even shade

including cleaning the surface an even shade including

cleanicn the surface of all dirt, dust and other foreign

SHEDULE B Page

Description of Item (With brif Specification And Rate in

Item No. Quantity Unit Amount

Reference to Book of Specifications) Figures

58 Steel work welded in built up sections, framed work 0.53 Quintal 9108.48

including cutting, hoisting, fixing in position and

applying a priming coat of red lead paint :-

(A) In beams and joints channels angles, column, tees,

flats with connecting plates or angle cleats as in

59 Providing and laying integral cement based water 54.00 SMT. 880.72

proofing treatment including preparation of surface as

required for treatment of roofs, balconies, terraces etc.

consisting of following operations.

(a) Applying and grouting a slurry coat of neat cement u

',brick bats is finally covered by jointless cement plaster

20mm th. in C.M. 1:4 added with special water proofing

compound confirming to IS:2645 & top smooth finished

with trowel with false chequered marking of

mm.size.The treatment is carried along

60 Providing and laying broken chine mosaic flooring 54.00 SMT. 779.69

for terrace using 12 mm to 20 mm broken pieces of

glazed tiles to be laid over cement mortar 1:3 to plain or

slope and to be tempered to bring mortar creme out

upto surface using

61 Providing and fixing Stainless Steel railing having 50 37.50 RMT. 3101.71

mm dia hollow stainless steel pipe as hand rail and

mm dia hollow stainless steel pipe with combination of

10 cm long 16mm dia pipe as per virtical supports

mm dia hollow stainless steel pipes H

62 Providing and fixing Teak Wood Frame 50 x 75 x 35 5.00 SMT. 8083.03

mm with 19mm thick ply shuttur with both sides

laminated and shutter fabricated from 19 mm thick

including three coats of lacquer polishing to exposed

wooden surfaces and Stainless steel decorative ty

63 Providing and constructing sandwitch type Granite stone 3.53 RMT. 3589.54

top & bottom Kota Stone platform 0.6 mt. wide &

mt. height, including front granite stone patti of 10 cm

wide, vertical partitions of Kota stone with cement

Mortar(1:1) as required comp as per

64 Providing and fixing kitchen platform trolley having 3.53 SMT. 19250.60

three drawers of SS (IS 304) of required size like thali,

katleri, perforated, partition, cupsosar type in kitchen

platform having drawer front side and backside by using

19mm thick all proof plywood of ( IS 710 ) quality all

side laminated etc. as directed. The size of SS (IS 304)

basket of size 4" to 18" for thali, dish, katleri, perforated,

partition, cupsosar type as directed including necessary

S.S. fittings, handles, nobs, telescopic channels, etc. as

65 Providing and fixing in position 300mm high,150mm 2.00 SMT. 707.00

wide English/Gujarati Letters made from 1.0mm thick

stainless steel sheet as directed by engineer in charge.

With all tools & plants etc. comp.

SHEDULE B Page

Description of Item (With brif Specification And Rate in

Item No. Quantity Unit Amount

Reference to Book of Specifications) Figures

66 Providing and fixing wash down water closet (European 4.00 No 4327.52

type, W.C. Pan) with integral P or S trap including

jointing the trap with soil pipe in Cement Mortar 1:1 (1-

Cement : 1-fine sand) (Seal and cover to be measured

and paid for separately)(A) vitreous China Pattern :(i) in

white colour, Providing and fixing 12.5 Litres low level

flushing cistern with a pair, of C.I. or Mild brackets,

complete with fittings such as lead valve less syphon,

15mm nom.nal size brass ball valve with polythene

float, C.P brass handle unions and couplings for

connections, with inlet, outlet and overflow pipes, 40mm

dia.porcelain enamelled flush bend including cutting

holes in walls and making good the same connecting the

flush bend with cistern and closet (overflow pipe to be

measured and paid for separately)(A) Vitreous China (I)

In white colour, Providing and fixing plastic seat and

cover for wash down water closer with C.P. brass hinges

and rubber buffers. (B) Black plastic seal and cover,

With Jet spray heavy duty with S.S. Braided hose 60 cm

67 Providing and fixing washbasin with single hole for 4.00 No 2461.70

pillar tap with C.I. or M.S. brackets painted white

including sutting holes and making good the Providing

and fixing C.P. brass waste for washbasin or sink. (A)

32mmdia.,Providing and fixing pillar tap,

68 Providing and fixing PVC SWR Nahni trap IS 14735 for 6.00 No 599.63

drain - 100 mm diameter with jali of the following

nominal diameter of self cleansing design with C.I

scread down or hinged grating including the cost of

cutting and making good the walls.

69 Providing and fixing screw down bib taps of following 8.00 No 186.82

size.(A) Brass screw down bib tap polished bright. (i)

70 Providing & fixing of overhead shower 80 mm (3”) dia 3.00 No 1151.87

with 3 flow with Overhead Shower arm 200 mm with

wall flange complete (i) 15mm dia.,Providing and fixing

brass screw down stop tap.(A) 15mm dia.

71 Providing and fixing Kitchen sink with C.I. or M.S. 1.00 No 3204.92

brackets, painted white including cutting holes in walls

and making good the same (C) S.S. & Sink.(i) 600mm

x 450mm x 150mm size with Providing and fixing C.P.

brass waste for washbasin or sink. (A)

72 Providing and fixing 600mm x 450mm bevelled edge 4.00 No 859.40

mirrror of superior glass mounted on 6mm thick A.C.

sheet or plywood sheet and fixing to wooden pluge with

C.P. brass screws and washers.

73 Providing and fixing C.P. brass towel rail comlete with 3.00 No 616.42

C.P. brass brackets fixed to wooden plugs with C.P.

brass scews.(B) 600mm x 20mm size.

74 Providing and fixing 600mm x 120mm glass shelf with 3.00 No 544.51

C.P.brass bracket and guard rail complete mixed to

wooden plug with C.P. brass screws

75 Providing and fixing Gun metal check or non-return 2.00 No 420.63

fullway wheel valve. 25mm. dia.

SHEDULE B Page

Description of Item (With brif Specification And Rate in

Item No. Quantity Unit Amount

Reference to Book of Specifications) Figures

76 Providing and fixing Gun metal check or non-return 2.00 No 663.42

fullway wheel valve. 40mm. dia.

77 Providing and fixing chromium plated brass half turn 4.00 No 263.77

flush cock of approved quality including fixing in pipe

line etc. complete.(ii) 25mm dia.

78 Providing and fixing ball cock of approved. quality as 1.00 No 132.88

directed.(A) Copper Metal (A) 25mm. dia.

79 Providing laying and jointing in true line and level 45.00 RMT. 72.64

15mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water

including fittings as approved by Engineer In Charge.

Pipe shall be fixed on the wall with the help of clamp at

every two metre C/C or shall be concealed as directed

including necessary fittings etc. including testing of pipe

and joints and fixing the same with adhesive solvent,

including cost of all materials.

80 Providing laying and jointing in true line and level 46.00 RMT. 91.83

25mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water

including fittings as approved by Engineer In Charge.

Pipe shall be fixed on the wall with the help of clamp at

every two metre C/C or shall be concealed as directed

including necessary fittings etc. including testing of pipe

and joints and fixing the same with adhesive solvent,

including cost of all materials.

81 Providing laying and jointing in true line and level 10.00 RMT. 195.66

50mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water

including fittings as approved by Engineer In Charge.

Pipe shall be fixed on the wall with the help of clamp at

every two metre C/C or shall be concealed as directed

including necessary fittings etc. including testing of pipe

and joints and fixing the same with adhesive solvent,

including cost of all materials.

82 Providing, laying and jointing in true line and level 110 57.00 RMT. 878.56

diametre U.P.V.C (Type B) conforming to IS 13592-

1992 with one end plain and other end socketed with

rubber ring, & fittings conforming to ISI 14735-1999 of

approved make for drainage system pipe line, pipe shall

be jointed with each other with rubber lubricant, pipe

shall be fixed on wall using of PVC clamp of the size

110 mm diametre x 149 mm length x 145 mm heigh at

every 2000 mm center to center or shall be concealed in

walls as directed including necessary fittings such as

bends, shoes etc. including testing of pipes and joints

and jointed with adhesive solvent cement including cost

of all materials.

83 Providing and fixing S.W. gully trap with C.I. grating 2.00 No 1246.91

brick masonry chamber and water tight C.I. cover with

frame of 300mm x 300mm size (inside) with standard

weight.(i) Square mouth traps.(B) 150mm x 100mm size

P or R type

84 Constructing Brick masonry road gully chamber 500mm 3.00 No. 2017.19

x 450mm x 600mm including 500mm x 450mm C.I.

horizontal grating wih frame complete.

SHEDULE B Page

Description of Item (With brif Specification And Rate in

Item No. Quantity Unit Amount

Reference to Book of Specifications) Figures

85 Constructing brick masonry chamber for underground 3.00 No 2932.92

C.I. Inspection chamber and bends with bricks having

crushing strength not less than 35Kg/Cm2 in C.M. 1:5

C.I. cover with frame (Light duty) 455mm x 610mm

intenal dimensions total weight of cover with frame to

be not less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of

frame 15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1-

cement :2- coarse sand :4-graded stone aggregate 20mm

size) foundation concrete 1:5:10 inside plaster 15mm

thick with cement mortar 1:3 finished smooth with a

floating coat of neat cement on walls and bed concrete

etc. complete.(i) Inside dimensions 455mmx 610mm

and 450mm deep for single pipe line.

86 Providing laying (to level or slopes) and jointing 12.00 RMT. 257.18

reinforced concrete Light duty non-pressure pipes I.S.

class NP2 of the following internal diameter with collars

and butt ends prepared for collar joints including testing

of joints complete. (B) 150 mm d

87 Providing laying (to level or slopes) and jointing 10.00 RMT. 359.84

reinforced concrete Light duty non-pressure pipes I.S.

class NP2 of the following internal diameter with collars

and butt ends prepared for collar joints including testing

of joints complete.(C) 250 mm di

88 Providing laying (to level or slopes) and jointing 10.00 RMT. 678.02

reinforced concrete Light duty non-pressure pipes I.S.

class NP2 of the following internal diameter with collars

and butt ends prepared for collar joints including testing

of joints complete.(D) 300 mm di

89 Providing & fixing G.I. Rain water spout of 50 mm.dia 2.00 No. 101.90

& 30 cm length etc.

90 Providing and fixing in position cowel went to pipes.(C) 2.00 No. 505.17

91 Providing erecting and fixing double coated PVC. (ISI) 1000.00 Lit 3.94

water tank of required capacity each with all necessary

fittings and connection etc. complete on terrace.

92 Point wiring for Light / Bell with 2-1.5 sq.mm & earth 37.00 Pt. 485.81

wire of 1.5 sq.mm (Green) both are of ISI marked

KV grade FRLS PVC insulated multi strand copper

wires up to 10 mtr length , in below type of pipe erected

with 6A Modular type switch / bell push & accessories

and earth continuity of following type, erected on PVC /

Metallic/Wooden box, single mounting base frame

covered with textured/ metallic/ white front plate

modules erected on/ in wall / ceiling as per pipe erected,

with necessary Lamp holder/ ceiling rose /

H.D.Connector as directed. (f) with medium class Rigid

PVC pipe and accessories erected concealed in

wall/ceiling complete Cat. III

SHEDULE B Page

Description of Item (With brif Specification And Rate in

Item No. Quantity Unit Amount

Reference to Book of Specifications) Figures

93 Point wiring for FAN with 2-1.5 sq.mm & earth wire of 7.00 Pt. 674.68

1.5 sq.mm (Green) both are of .ISI marked 1.1 KV

Grade FRLS PVC insulated multi strand copper wires

up to 10 mtr length, in below type of pipe erected with

6A Modular type switch and hum free EME step type

electronic fan regulator mounted and accessories with

earth continuity of following type erected on PVC /

Metallic/ Wooden box, single mounting base frame

covered with textured/metallic/white front plate

modules erected on / in wall / ceiling as per pipe erected.

with necessary ceiling rose / H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and accessories

erected concealed in wall/ceiling complete Cat. III

94 Point wiring for on board Looped Plug with 6A Modular 8.00 Pt. 257.55

type switch & 5 pin socket erected on PVC/ Metallic/

Wooden box, single mounting base frame covered with

textured / metallic/ white front plate modules erected

on/ in wall/ ceiling with following type accessories Cat.

95 Providing following type of Modular Type Accessories 10.00 Nos 151.50

mounted with PVC / metallic/Wooden box, single

mounting base frame covered with textured /

metallic/white front plate , modules erected with

necessary connections as per site situation directed by

Engineer In charge. (1)One No. SP 6 Amp. Cat.III

96 (2) One No 5 pin plug Cat.III 10.00 Nos 151.50

97 (3) Two Pin/RJ-11 Telephone Socket [A] For One Gang 3.00 Nos 160.59

98 (8) Computer RJ-45 socket Cat.III 8.00 Nos 160.59

99 (9) 16 Amp. SP one way switch Cat.III 10.00 Nos 180.79

100 (10) 6/16Amp. Universal socket Cat.III 10.00 Nos 199.98

101 Providing and erecting ISI mark Medium class RIGID 165.00 Mtr. 24.24

PVC PIPES of following size complete to be erected

on/in wall or ceiling erected with necessary PVC fittings

& Junction boxes fixed with adhesive solution &

Clamps with following dia of pipes, in approved manner

as directed (a)20 mm

102 Providing and erecting Mains with 1.1 KV grade FRLS 360.00 Mtr. 82.82

PVC insulated ISI marked stranded Copper conductor

wire in following type of pipe to be erected concealed in

/flushed on wall/ceiling, with 1.5 sq. mm copper

conductor FRLS PVC insulated stranded wire of green

colour for earth continuity of following size (A) With

medium class Rigid PVC pipe and accessories (b) 2 wire

103 Providing and erecting Mains with 1.1 KV grade FRLS 270.00 Mtr. 112.11

PVC insulated ISI marked stranded Copper conductor

wire in following type of pipe to be erected in / on wall /

ceiling with 2.5 sq. mm copper conductor FRLS PVC

insulated stranded wire of green colour for earth

continuity of following size (A) with medium class

Rigid PVC pipe and accessories (a) 2 wire 4 sq. mm

104 (b) 2 wire 6 sq. mm 60.00 Mtr. 147.46

SHEDULE B Page

Description of Item (With brif Specification And Rate in

Item No. Quantity Unit Amount

Reference to Book of Specifications) Figures

105 Supplying and erecting Flexible PVC insulated multi 12.00 Mtr. 46.46

strand multi core 1.1 kv grade ISI marked copper wires

of following size to be erected as directed. (e)

Sq.mm 3 core round PVC sheathed

106 Supplying & erecting approved make Telephone Cable 45.00 Mtr. 20.20

electrolytic copper conductor PE insulation twisted in

two pairs, & wrapped with FRLS PVC tape & sheathed

with FRLS PVC or HFFR outer Jacket suitable for

telephone wiring & confirming to C-DOT erected in

existing pipe. of following size of conductors & nos.of

pairs. With necessary connections. [A] Conductor Size

0.5 mm (a) Unarmoured (2) Two Pairs

107 Supplying & erecting approved make LAN cable of 120.00 Mtr. 47.47

following size in existing pipe as per direction [C] CAT -

108 Providing & erecting Switch board for Computer or 8.00 Nos. 1133.22

electric apparatus consisting of following modular type

accessories mounted with PVC/ Metallic concealed/

open box with single mounting base frame covered with

textured/ metallic/ white front plate,modules erected

with necessary connections as directed

1 no. 6A/16A universal plug-switch combined.

3 nos. 6A Switch

3 nos. 6A 5 pin Plug

For Modular Type Accessories

109 Decorative call bell Ting-tong box type 250 volts 2.00 Nos. 71.71

complete erected

110 Supplying and erecting LED indoor fittings with LEDs 15.00 Nos. 373.70

of wattage 0.2 Watt to 0.5 Watt assembled on single

MCPCB, with housing used as a heat sink shall be made

of thick sheet Steel conforming to IS: 513/ CRCA/

aluminium die cast powder coated and high U.V. &

corrosion resistance with diffuser with company

mark/name 160V to 270V, Power Factor more than 0.95,

THD < 15%, CCT 3000 K to 6500K, Luminaire

efficacy> 85 lumens/ watt, LED driver efficiency > 85 %

(fitting required LM-79 & LM-80 Certificates) (NOTE:

Below description have shown ranges of Wattage

capacity of LED fittings.The Engineer incharge may

(A) Tube Light with integral driver (iv) 22-24 Watts,

Surge - 2KV,IP-20, conventional 4 feet Cat.III

111 Supplying and erecting led lamps with following wattage 9.00 Nos. 112.11

capacity of 220 to 240 voltage, minimum 15000 burning

hours life, 500 V in built-surge protection,Polycarbonate

diffuser, mounting suitable for E14 / E27 / B22 lamp

holders, pf >= 0.5 (A) LED Lamps integral type, with

PC diffuser suitable LAMP holder (ii) 5 to 8 watts

SHEDULE B Page

Description of Item (With brif Specification And Rate in

Item No. Quantity Unit Amount

Reference to Book of Specifications) Figures

112 Supplying and erecting LED indoor fittings with LEDs 7.00 Nos. 758.51

of wattage 0.2 Watt to 0.5 Watt assembled on single

MCPCB, with housing used as a heat sink shall be made

of thick sheet Steel conforming to IS: 513/ CRCA/

aluminium pressure die cast powder coated and high

U.V. & corrosion resistance with diffuser housed in

aluminium casted body with company mark/name 160V

to 270V,Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K, Luminaire efficacy>

lumens/watt, LED driver efficiency > 85 % ( fitting

required LM-79 & LM-80 Certificates) (NOTE: Below

description have shown ranges of Wattage capacity of

wattage capacity between the ranges shown.) (A)

Square/ Circular shaped Surface/Recessed Mount

Downlight with provision for spring loaded mounting

clips complete.IP20 (iv) 22-24 watts, Surge-2 KV Cat-III

113 Supplying and erecting LED street light / Flood light 4.00 Nos. 3345.12

fittings with High power White LEDs wattage of 3 Watt

and above assembled on single MCPCB, efficiency

more than 130 lm/w and corrosion free High pressure

die cast aluminum housing with smooth finish powder

coated and heat sink extruded aluminium with diffuser

and Polycarbonate optics/ lenses, with toughened glass

with company mark/name engraved or embossed 160 to

270 V,Power Factor more than 0.95, THD < 10 %, CCT

3000 K to 5700K,Uniformity ratio >0.45, Luminaire

efficacy> 100 lumens/watt . LED driver efficiency >

%. (fittings required LM-79 & LM-80 certificates)

(NOTE: Below description have shown ranges of

Wattage capacity of LED fittings.The Engineer incharge

shown.) (A) Street Light (IP-65), Surge protection -4KV

integral and ,Light must have 440VAC line supply with

over-voltage protection. (i) above 36 to 48 watts Cat.III

114 Providing and erecting Miniature circuit breaker single 4.00 Nos. 270.68

pole 0.5A to 2A system and having breaking capacity

10 KA to be erected in existing box. confirming to IS

8828/1996 with ISI Mark Cat.III

115 Providing and erecting Miniature circuit breaker single 24.00 Nos. 112.11

pole 6A to 25A suitable to operate on 240 V A.C.

system and having breaking capacity 10 KA to be

erected in existing box. confirming to IS 8828/1996 with

ISI Mark Cat.III

116 Providing & erecting 240 V MCB double pole switch for 4.00 Nos. 330.27

motor & inductive load (C Curve) having 10 KA

breaking capacity & confirms to IS : 8828 in existing

box having following capacity (B) 40 Amp. Cat.III

117 Sheets steel powder coated enclosure suitable for 2.00 Nos. 176.75

incorporating One/Two nos. MCB.

SHEDULE B Page

Description of Item (With brif Specification And Rate in

Item No. Quantity Unit Amount

Reference to Book of Specifications) Figures

118 Providing and erecting Sheet Steel powder coated MCB 2.00 Nos. 1492.78

distribution board - flush / surface mounted fitted with

busbar, neutral link, earth bar and DIN rail, Conforms to

IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house

appropriate nos. of MCBs.(The DBs should be used of

same company of MCB to be used) suitable for (A)

single phase incoming and horizontal single phase

outgoing (b) sheet steel double door (IP-43) (iv)12 way

119 Providing and erecting Approved make RCCBs 2.00 Nos. 2235.13

conforming to IS: 12640 and having sensitivity of

mA and Short Circuit withstand capacity of 10 KA and

suitable for operation on single phase 240 V,50Hz.

having characteristic of quick action & tripping with all

advance feature & do not incorporate any electronic

component. for following Max. rating erected as

directed (ii) 40Amps. DP Cat. III

120 Providing and erecting Pipe type earthing having 150 4.00 Nos. 368.65

cms.long and 2.5 cms. dia. galvanised iron pipe with

coupling and buch buried in specially prepared earth pit

complete with necessary 8 SWG earth wire.

121 For using salt and charcoal / coke as required for pipe 4.00 Nos. 171.70

type earthing.

122 Providing and erecting XLPE (IS:7098) (I)-88 ISI 80.00 Mtr. 92.92

armoured cable Aluminium conductor for 1.1 KV. to be

laid on wall with necessary clamps or in existing trench

/pipe of following size of cables. (B) 2 core 6 Sq. mm

123 Making trench in soft soil of suitable width of 90 cm 40.00 Mtr. 55.55

deep for laying cable or locating the fault all over the

run and back filling the same and making the surface as

normal ground.

124 Providing & laying approved make Double walled 40.00 Mtr. 62.62

corrugated pipes (DWC) of polyethylene (conforming to

IS 14930 II) with necessary connecting accessories of

same material at required depth in existing trench for

laying of cable. below ground / road surface for

enclosing cable (A)50 mm outer dia

125 Providing and, fixing heavy duty flange type brass cable 8.00 Nos. 38.38

gland with rubber ring for PVC insulated armoured cable

complete with out going tails, insulating tape etc for

following size of cables. (B) 2 to 4 core 6 Sq. mm

126 Solder less crimping type Aluminium lugs conforming 32.00 Nos. 6.06

to IS suitable for cable of following size evenly crimped

with high pressure tool & connected to switchgear

terminals with brass/ cadmium plated nut bolts in an

approved manner. (A) 1.5/ 2.5/4/6 Sq.mm

127 Providing and erecting Approved make Ceiling fan with 7.00 Nos. 1596.81

double ball bearing ISI mark with condenser A.C.

23OV.50 c/s.1200 mm. sweep complete, canopy erected

on existing hook or clamp with earthing. [Make shall be

approved by Engineer in charge]

SHEDULE B Page

Description of Item (With brif Specification And Rate in

Item No. Quantity Unit Amount

Reference to Book of Specifications) Figures

128 Supplying and erecting 19 / 20 mm. nominal bore 7.00 Mtr. 108.07

Medium Class M.S. Pipe down rod erected duly painted

for fan complete with proper insulation without leakage

and earthing.

129 Supplying & erecting fan hook box of 10 mm M.S. 7.00 Nos. 108.07

round bar bounded to the RCC bars up to 50mm length

each side and pierced through a 16 Gauge M.S. box /

Heavy Duty PVC box complete erected concealed in

Ceiling with necessary finishing.

130 Supplying & erecting single phase approved make 4.00 Nos. 2054.34

industrial exhaust fan suitable for medium duty ring

mounted low noise operation suitable for medium duty

having following dia size and maximum speed in RPM

[A] 305 mm dia 900 RPM Cat.II

131 Supplying and erecting approved make Octagonal pole 4.00 Nos. 6874.06

made from HR sheet steel. The pole should be made as

per IS. and shall be coated with hot dip galvanizing as

per IS 2629/2633/4759, suitable suspend local wind

speed with integral Junction box consist of terminal

plate of min 6mm Hylam sheet, standard profile

35mmX7.5mm Din-Rail for MCB Mounting, stud type

terminal and arrangement for cable termination to be

erected With Suitable foundation (Included) as per

details given by manufacturer considering site

requirement. (C) 5 Mtr. Long 70 mm Top X 130 mm

bottom dia, 3 mm thickness with

200mmX200mmX12mm base plate, 4-M16 Bolts and

600mm long with necessary G.I. J Bolts .Approx Pole

weight 46 kg

132 Supplying and erecting Street light pole bracket 4.00 Nos. 491.87

comprising main B Class GI pipe of 4.2 cm/require

outside dia. complete with suitable B Class G.I. sleeve

tubing of approx. 45cms.length and suitable for

76.5mm/80mm/require size of pole top having nuts and

bolts for fixing the brackets and having spread of

mtr. Length with 110 deg.with vertical plane and

suitable welded stiffener reducer and nipple with check

nut complete painted with one coat.of Red oxide / PU

base primer and two coats of Aluminium / PU paint.

paint with following nos of arms. [A] Single Arm

bracket 0.5 Mtr

SHEDULE B Page

Description of Item (With brif Specification And Rate in

Item No. Quantity Unit Amount

Reference to Book of Specifications) Figures

133 Supplying & erecting IP 55 grade following size section 1.00 Nos. 3595.60

pillar fabricated from joint less M.S. Sheet with angle

iron legs made from jointless M.S. Angle with cable

clamps to be buried in ground to have appropriate

erection to work uniform until erected with cement

concrete foundation and 45 cm high bricks work

finishing with plaster etc. hinged double door internally

supported on both side, with internal and outside

looking arrangement with look and keys in duplicate

x 35 x 5 mm M.S. Angle of Two Nos. one is welded and

other with nut and bolt for erecting Bakelite sheet.

Painting the Section Pillar inside and out side with three

tank powder coated paint. section pillar roof should be

without joint with water leakage proof & tested as per IP

55 test & followed by IS 2147 of 1962 (B) 75 X 60 X

cm section pillar fabricated from 16 Gauge MS Sheet

with angle iron legs 45 cm long made from 35 X 35 X

mm thick MS angle.

134 Supplying & erecting approved make Digital time switch 1.00 Nos. 3168.37

having lithium cell 6 years operative and operate battery

backup 1 channel day clock with 14 memory

programme, suitable to operate on 240V + 5%, 16A

with, floating contacts Minimum switching setup time

minimum & LCD display. Also comprised permanent

ON/OFF switching. Programming switches & housed in

fire proof thermoplastic enclosure & transparent cover

erected as required with necessary connection erected as

135 Supplying & erecting power contactor ,AC3 duty for 1.00 Nos. 1883.65

time switch complete erected as per direction Cat III (B)

2 pole 250V 32 Amp.

136 Supplying & erecting carbon dioxide (CO2) fire 1.00 Nos. 8671.86

extinguisher user of following capacity with necessary

clamps made from 50 x 6 mm M.S. Flat with nut & bolts

grouted in wall complete. [B] For 5.5 / 6.5 KG Capacity

Rupees ThirtyNine Lakh NinetyThree Thousand One Hundred ThirtyFive Paise NinetyOne Only

I we am / are willing to carry out the work at …................................ % above/ Below percent ( Should Be writen

in figures And words) of the estimated rate mentioned above. Amount of my / our tender works out as under.

Estimated Amount Put to tender. 39,93,135.91 Estimated Amount Put to tender.39,93,135.91

Deduct…........ % Below Deduct…........ % Below

In Words In Words

(1) The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge

for which no extra payment shall be made.

SHEDULE B Page

Description of Item (With brif Specification And Rate in

Item No. Quantity Unit Amount

Reference to Book of Specifications) Figures

(2) The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

(3) GST and Income tax TDS will be deducted at a source while making payments of bills

(4) In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017

Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is a change as per

actual mix design the cost of difference of cement consumption have been deducted from the rate of original item at the rate

of input rate mentioned in all the tender.

Signature of Bidder

Deputy Executive Engineer Divisional Accountant

Panchayat ( R&B) Sub Division Panchayat ( R&B) Division

Choryasi Surat

Executive Engineer Executive Engineer

Electrical R & B Division, Panchayat ( R&B) Division

Surat Surat

SHEDULE B Page