REPAIR TO BOUNDARY WALL, GATE FENCING DRAIN AND CERTAIN MISC WORKS UNDER AGE B/R - I OF GE (W) BAREILLY.

Amount

Dismantling of posts or struts (wood, steel or RCC) any section including taking out embedded portion and making good disturbed natural ground complete all as specified and directed

Dismantling of wire fencing any type & size complete all as specified and directed.

Excavation in Post holes (or similar holes ) in any type of soil, each not exc 0.5 cum , getting out , returning filling and ramming carts not exc 25cm , watering and removing surplus soil to a distance not exc 50 mtr and making good surface complete all as specified and directed

M&L for PCC 1:3:6 type C1 (using 20 mm graded stone aggregate) as in foundation bed of manhole, drains and steel post embeded etc complete all as specified and directed

Fixing only chain link fencing including line wires any mesh, size and type to any type of standards, rails, straining bolt, etc including provision of binding wire complete all as spd and directed.

Supply only chain link MS galvanised fencing any size or type complete all as spd and directed.

S & F of mild steel bolts, purpose made, with hexagonal or square head at one end and screwed the other or screwed both ends, each screwed ends to be fitted with washer and one hexagonal or square nut, exc. 30 cm long and not exc. 12 mm dia of neck complete all as specified and directed.

S & F mild steel work as in flat tie for post and struts in fencing including cutting tops to shape as directed ,drilling holes ,notching wire etc, flat iron including drilling holes , confirming to Fe 410-O or Fe -310-O complete all as specified and directed

S & F of rolled mild steel joist, channel, angle, flat iron or Tee sections, fixed independently without connecting plates etc. (cut to ordinary length i.e. within 20 mm of length) confirming to Fe-290 Grade E-165 complete all as specified and directed

S & F of galvanised, 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails, straining bolts, including securing or tying at crossings with and provision of galvanised mild steel wire, straining bolts at ends, staples or steel pins etc. complete all as specified and directed.

M & L for tightening of loose Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) as obtained from item no-2 refixing the same above complete all as specified and directed.

Dismantling structural steel work including doors, gates but excluding framed truss complete all as specified and directed.

S & F of rolled mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc. confirming to Fe-410-W (Grade E-250) Quality 'B', drilled for fixing of steel sheeting or other covering doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fitting and also fastening complete all as specified and directed.

M&L for preparation of new steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.

M&L for preparation of new steel surfaces of any description, n.exc 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.

M&L for preparation of old painted steel and iron surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coat of Synthetic enamel paint applied with fully automatic airless spray machine complete all as specified and directed.

M&L for preparation of old rusted chain link fencing steel and iron surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coat of Aluminium paint applied with fully automatic airless spray machine complete all as specified and directed.

M&L for preparation of old painted steel and iron surfaces of any description , not otherwise described, n.exc 10 cm width or girth and applying two coat of Synthetic enamel paint complete applied with fully automatic airless spray machine all as specified and directed.

Demolition of brick work built in cement mortar complete all as specified and directed.

M & L for brick work with sub class ‘B’ brick straight or curved on plan exc 6 m mean radius built in CM (1:6) complete all as specified and directed.

Removing Cement mortar or cement lime mortar from and cleaning bricks, stacking for measurement including all extra handling and removal and disposing off rubbish complete all as specified and directed.

All as per item no 20 above but expect bricks complete all as specified and directed. Note Bricks Obtained from Item No 19 Shall be used in this item)

M&L 15 mm thick cement plaster on brick surfaces or concrete surfaces in CM (1:6) including finishing the surface even and fair complete all as spd and directed

M&L 15 mm thick cement plaster on brick surfaces other than fair faces or concrete surfaces in CM (1:6) including finishing the surface even and fair complete all as spd and directed

M&L 15 mm thick cement plaster on brick surfaces or concrete surfaces in cm (1:6) and finishing the surface even and fair including taking down cement or cement lime plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.

M&L 15 mm thick cement plaster on brick surfaces other than fair faces or concrete surfaces in cm (1:6) and finishing the surface even and fair including taking down cement or cement lime plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as spd and directed

M & L for preparation of un-decorated plastered surface of walls and applying two coats of cement base paint over a one coat of white wash complete all as specified and directed.

M & L for preparation of un-decorated plastered surface of walls and applying three coats of white wash complete all as specified and directed.

Demolition of Reinforced cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and direcetd.

M & L for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc complete all as specified and direcetd.

M&L for mild steel TMT bar 10 mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for mild steel TMT bar 5 mm and over dia in stirrups, spacers ,and binders cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for RCC type B1 1:2:4 (using 20 mm graded aggregate) as in beams , cantilevers , bressummers ,lintel , coping complete all as specified and directed.

M & L for Providing, cement concrete type C1 1:3:6 (using 20 mm graded aggregate) , in lintels , cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings , copings, kneelers, apex stones, bed plates, kerbs water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and direcetd.

M&L for 10 to 12 mm thick Granite finish tile (table rubbed and polished) as in windows cill, door cill, gate pillar/post & cooking platforms and like in cement mortar (1:4) including necessary form work , pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite with full round bull nosing edging and including Dismantling of Old granite tiles complete all as specified and direcetd.

M&L for 15 to 18 mm thick Granite (table rubbed and polished) as in windows cill, door cill, gate pillar/post & cooking platforms and like in cement mortar (1:4) including necessary form work , pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite with full round bull nosing edging and including Dismantling of granite complete all as specified and direcetd.

M & L PCC (1:3:6) type B-1(using 20mm graded stone aggregate) as in surface channels and drains complete all as specified.

Extra for forming fair finished drain or channels 30cm inner girth in cement concrete , using extra cement, including forms, moulds, mitred/stopped ends etc. complete all as specified

Add or deducted for each 25mm grith or part thereof over or under 30cm -ditto- all as specified and directed.

M&L for hardcore of gauge n exc. 63 mm but not exc 100mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed

M&L for 75 mm thick cement concrete, type C 2, 1:3:6 (using 40 mm graded stone aggregate) as in sub base of floor /paving etc complete all as specified and directed.

M & L Proviiding 100mm thick Cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in surface finishing cement concrete surface even and smooth complete .

Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M & L for 60 mm thick, M-35 grade machine pressed pre-cast concrete interlocking paver block confirming to IS 15658-2006 with grey cement and pigment in any shape and size, laid dry over 25mm thick sand cushioning including demolition of old tiles complete all as specified and directed.

M&L for Chequered cement concrete tiles 30cm x 30cm x 25mm thick set jointed and pointed in neat cement slurry in floors with in equal proportions & pigments with red and yellow colour over including 20mm thick screed bed in CM 1:6 including demolition of old tiles complete all as specified and directed

M&L for 400x400 mm 12mm thick exterior grade vitrified designer anti skid coloured tiles including designer borders tiles (Square/ rectangular) floors/path/hard standing etc set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 15mm thick screed bed in cm-1:6 including dismantling of old tiles complete all as specified and direcetd.

S&F in repair multiwall polycarbonate translucent roof sheet 5-8 mm thick corrugated (flat/curved) as in roof covering/cladding to wall/gates for fixed with self tapping screws complete all as specified and as directed.

S&F in repair steel framed work with hollow Ms tubular section including special shaped washer etc. complete using induction butt welded tubes conforming to I.S.1161-1979 grade St-240 complete all as specified and as directed.

M & L for Providing precast cement type C-0 1:3:6(12.5mm graded aggregate ) concrete louvres and jallies, 25mm thick (mea sured solid), set in cement mortar 1:6 including all mouldings but excluding frame complete all as specified and as directed.

M&L for machine pressesd precast cement concrete kerb stone outer coloured surface size 150mm long 100mm wide and 350mm deep in PCC (1:2:4) type B0 using 12.50mm graded stone aggregate including weathering, slightly rounded or chemferred angles and throating , as directed edges joint filling in CM 1:4 complete including earth work for kerb stone and taking down existing detoriared kerb stone complete all as specified and directed.

M&L for preparation of new or previously treated surfaces of kerb stones and applying adquate nos. of coats of painting with glossy paints for day and night visibility with different color combinations black/white or yellow/black over one coat of priming paint complete all as specified and directed .

Notes:- Tenderers may note that amount as given in schedule of credit will be deducted from the total amount to worked out the net contract sum at the time of Acceptance of tender.

SHRI BALA JI STORE (BID ID -3083120)

UTTRAKHAND BUILDERS (BID ID -3087192)

Gaurav India Corporations (BID ID -3080897)

JAI SRI RAM ASSOCIATE (BID ID -3084689)

M/S Shree Sai Builders (BID ID -3087044)

REHAN CONSTRUCTIONS (BID ID -3085987)

Shikhar ji Enterprises (BID ID -3085608)

Mohit Enterprises (BID ID -3081073)