Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹36.0 LAccepted-AOC | L1 | Accepted-AOC Accepted being L1 | |
| 2 | L2₹46.5 L+₹10.4 L (28.7%)Rejected-Finance 71 A LOOTERY MAHAL ORDERLY BAZAR PO BARRACKPORE DIST 24 PARGANAS N KOLKATA 700120 WB | 24 PARAGANAS NORTH | WEST BENGAL | 700120 | L2 | Rejected-Finance Rejected being higher than L1 | |
| 3 | L3₹46.9 L+₹10.7 L (29.6%)Rejected-Finance 72 5 53 PIPE ROAD PO BARRACKPORE DIST 24 PARGANAS NORTH PIN 700120 WB | 24 PARAGANAS NORTH | WEST BENGAL | 700120 | L3 | Rejected-Finance Rejected being higher than L1 | |
| 4 | L4₹47.6 L+₹11.5 L (31.8%)Rejected-Finance | L4 | Rejected-Finance Rejected being higher than L1 | |
| 5 | L5₹47.9 L+₹11.8 L (32.6%)Rejected-Finance | L5 | Rejected-Finance Rejected being higher than L1 |
Tender Value
₹33.9 L
EMD Value
₹67,800
Closing Date
3 Jul 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE AF Barrackpore
GE AF Barrackpore Post Barrackpore Dist 24 Parganas North Kolkata 700120
ADDN/ALTRN TO HANGER FOR PROVISION OF DUTY CREW ROOMS AT AF STN BARRACKPORE UNDER GE (AF) BARRACKPORE
2024_MES_659328_1
8526/BKP/AF OF 2024-25
Open Tender
Civil Works
Item Rate
180 days
GE AF Barrackpore
Class-D,
Category-a(i)
2 documents required · 2 mandatory
₹0
₹67,800
Yes
31 Aug 2024
12 Jun 2024
5 Jul 2024
12 Jun 2024
3 Jul 2024
26 Jun 2024
Amount
Demolition of brick work or stone boulder masonry, built in cement mortar including all quoins, arches, pillars etc. including removing of unserviciable bricks and debris from site complete all as specified and directed.
Demolition of cement concrete (unreinforced) in ground floors and paving n.exc. 15cm thick (below or above ground level) and removal of rubbish from the site complete all as specified and directed.
Taking down cement plaster of any description built in cement mortar on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc. and removal of rubbish from the site complete all as specified and directed.
Dismanting of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.
Surface excavation n.exc 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed.
Excavation in trenches n. exc 1.5 m wide and n. exc 1.5 m in depth for foundation etc or for shafts, wells, cess pits man holes, pier holes etc n.exc 10 sqm on plan and n.exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed.
Returning filling in including spreading levelling watering and well ramming in layers not exc 25 cm in soft/loose soil complete all as specified and directed.
Removing excavated material to a distance n. exc 50m and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified and as directed.
Spreading and levelling under floor in layers n exc. 25 cm thick and well ramming including watering as required of excavated loose soil, as retreived against respective excavation item complete all as specified and directed.
Materials and labour for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.
Material and labour for hardcore of broken stone or boulder of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.
Material and labour for PCC (1:4:8) type D2 (using 40 mm graded stone aggregate ) as in foundation, filling and mass concrete complete all as specified and directed.
Material and labour for PCC (1:3:6) type C2 (using 40 mm graded stone aggregate ) as in foundation, filling and mass concrete complete all as specified and directed.
Material and labour for PCC (1:2:4) type B1 (using 20 mm graded stone aggregate ) as in foundation, filling and mass concrete complete all as specified and directed.
Materials and labour for 40mm thick damp proof course in cement concrete (1:2:4), type B-0 (12.5mm graded stone aggregate) with WPC as per manufactures instructions to horizontal or vertical surfaces including necessary formwork and polythene film, 150 micron thick, laid on a coat of bitumen primer, @ 0.30 to 0.50 kg per sqm complete all as specified and directed.
Material and labour for PCC (1:2:4) type B-1 (using 20 mm grade stone aggregate) as in coping including necessary form work complete all as specified and directed
Material and labour for PCC (1:2:4) type B-1 (using 20 mm grade stone aggregate) as in hold fast block, filling in pressed steel chowkats or similar items etc including necessary form work etc. complete all as specified and directed.
Material and labour for reinforced cement concrete nominal mix (1:2:4) type-B1 (using 20mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like etc. complete all as specified and directed.
Material and labour for reinforced cement concrete nominal mix (1:2:4) type-B1 (using 20mm graded stone aggregate) beams, cantilevers, bressummers, lintels etc complete all as specified and directed.
Supply only liquid water proofing compound (WPC) complete all as specified and directed.
Material and labour for brick work with fly ash brick, old size, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and directed.
All as per item No 21.00 above but except bricks and -ditto-. Note:- Serviciable bricks obtained from item No 1.00 shall be reused under this item.
Form work to sides and soffits of floor or roof beams, slab, girders, bres-summers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. with rough finished flat surfaces of concrete complete all as specified and directed.
Form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or slopping) with rough finished flat surfaces of concrete complete all as specified and directed.
Supply and fix solid PVC door frame of size 50 mm X 47 mm made out of 5 mm plain coloured PVC sheet reinforced with mild steel square tube as per specification and drawing given on MES schedule Part–II (2020) complete all as specified and directed.
Supply and fix factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete all as specified and directed.
Supply and fix 100mm size stainless steel butt hinges medium weight complete all as specified and directed.
Suplly and fix 100mm size butt hinges, medium weight, cold rolled mild steel complete all as specified and directed.
Suplly and fix 150 mm long aluminum anodised barrel tower bolts cast type complete all as specified and directed.
Supply and fix 100mm size mild steel pressed handles, oval type, stove enamelled black complete all as specified and directed.
Supply and fix 150mm long aluminium handles, cast type, anodized complete all as specified and directed.
Supply and fix 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast- aluminium alloy complete all as specified and directed.
Supply and fix 300 mm long mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed.
Supply and fix brass Mortice lock, 4 lever vertical type, size 100 mm complete all as specified and directed.
Supply and fix 150mm long floor door stopper of aluminium alloy body tongue, anodised, with hard drawn steel spring fixed to door complete all as specified and directed.
Supply and fix door closer hydraulically regulated aluminium (extruded section body), designation No 3, universal type, suitable for aluminium door shutters of any size etc complete all as specified and directed.
Supply and fix stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.
Supply and fix structural steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging, also fastening and fixing conforming to Fe-410 W (Gde E-250) quality-A including one shop coat of red oxide zinch chrome primer complete all as specified and directed.
Material and labour for 1.60mm thick mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required including one shop coat of red oxide zinch chrome primer complete all as specified and directed.
Material and labour for mild steel TMT bar 10 mm dia and over cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
All as per item No 40.00 above but 8mm dia for stirrups, spacer, binders and -ditto-.
Material and labour for structural steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS-1161-1979 grade St.-240 including one shop coat of red oxide zinch chrome primer complete all as specified and directed.
Supply and fix 0.50mm thick pre-painted galvalume aluminium Zinc coating GI based corrugated / semi corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as per manufacturer instruction complete all as specified and directed.
All as per item No 43.00 above but except steel sheet and -ditto-. Note:- Serviciable steel sheet obtained from item No 4.00 shall be reused under this item.
Supply and fix 6mm thick (5 Nos of ply) veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on both faces; fixed with screws to aluminium frame work with clips etc complete all as specified and directed.
Supply and fix powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing/ paneling, CP brass/ stainless steel screws complete all as specified and as directed.
Supply and fix powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws complete all as specified and directed.
Supply and fix false ceiling with powder coated exposed GI grid suspension system (E-grid T-2430 or equivalent load carring capacity with mid span deflection n. exc. 1/360 span with hanger spacing of 1200mm c/c) consisting of main runner 3600mm long cross tee of section size 24 x30mm 1200mm/600mm long and wall angle of section size 20x20mm. The wall angle shall be fixed on PVC dash fasteners on the perimeter of the wall by steel screws with distance 300mm c/c. The main runners to be placed @ 1200mm, The cross tee 1200mm will be inserted in pre-cut slots of main runner at a regular interval of 600mm to form a modular grid of 1200mmx600mm. Additional cross tee of 600mm shall be placed perpendicular to the cross tee1200mm long to finally form a grid of 600mm x 600mm shall be supported by 4mm dia G.I. wire from perlins/soffits. 6mm thick high pressure steam cured Everest non Asbestos fibre cement designer ceiling board (density> 1200kg/cum, modules of rupture (M.O.R)-15.85 Mpa, thermal conductivity (k)-0.0872 W/mk) of size 595mm x 595mm, confirming to IS 14862 & type B catagory III of ISO 8336-1993, (Reaction of fire-A2 -s1-d0) tested as per EN 13501 Part-I & BS-476 part-4, 5, 6 & 7, should be placed in the grid module to form a false ceiling complete all as specified and directed. Note: Work shall be executed through authorised applicator of OEM as approved by GE. Make: Armstrong/ Saint Gobain/ Lafarge/ Everest.
Material and labour for green marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade including 15mm thick screed bed in cement mortar (1:4) complete all as specified and directed.
Material and labour for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed.
Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc.including brushing neat cement slurry with 3 kg of cement per sqm complete all as specified and directed.
Supply and fix factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed.
Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed
Material and labour for 75mm thick PCC (1:3:6) type C-1 (using 20mm graded stone aggregate) as in plinth protection including finishing the concrete surface even and smooth with using extra cement including forming of construction joints at 3 meter intervals of 30mm deep x 10mm wide filled with sealing compound type-A complete all as specified and directed.
Material and labour for 25mm thick PCC (1:2:4) type B-0 (using 12.50mm graded stone aggregate) as in base course/ levelling course for laying floor finishes complete all as specified and directed.
Material and labour for machine cut Kota stone slab flooring 20-25mm thick over 15mm thick screed bed in cement mortar (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.
Material and labour for machine cut Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over 10mm thick rendering in cement mortar (1:4) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.
Material and labour for vitrified ceramic tiles (premium quality) 7 to 8mm thick, dark shade as approved, polished area of each tiles n. exc. 0.36 Sqm (square/ rectangular) in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with and including 15mm thick screed bed in cement mortar (1:6) complete all as specified and directed.
All as per item No 58.00 above but in skirting and dado laid over and including 10mm thick rendering in cement mortar (1:4) and -ditto-.
Material and labour for ceramic, non skid coloured tiles (premium quality) 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11sqm but not exc. 0.18sqm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15mm thick screed bed in cement mortar (1:6) complete all as specified and directed.
Material and labour for glazed ceramic tiles of size 350x250x7 mm / 450x350x7mm (premium quality) coloured in vertical surfaces such as riser of steps, skirting, dado and pillar set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10mm thick cement plaster in cement mortar (1:4) complete all as specified and directed.
Material and labour for 10mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar (1:6) and finish the surfaces even and smooth without using extra cement as in wall complete all as specified and directed.
Material and labour for 15mm thick rendering in cement mortar (1:4) on fair faces of brick work or concrete surfaces with using water proofing coumpound (WPC) @ 200ml per 50kg bag of cement or as per manufacturers instruction and finish the surfaces even and smooth without using extra cement as in wall complete all as specified and directed. Note : WPC will be measured and paid separately under respective item.
Material and labour for preparation of new plastered surfaces of walls and applying two coats of acrylic washable distemper over a coat of alkali resistance primer over 2mm thick wall care putty complete all as specified and directed.
Materials and labour for complete removal of existing treatment on walls and applying two coats of acrylic washable distemper over a coat of alkali resistance primer over 2mm thick wall care putty including preperation of surface complete all as specified and directed.
Material and labour for preparation of new plastered surfaces of walls and applying two coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming one coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed.
Materials and labour for complete removal of existing treatment on walls and applying two coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming one coat of exterior primer applied @ 0.90 litre/ 10 sqm including preperation of surfaces complete all as specified and directed.
Material and labour for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinch chrome primer complete all as specified and directed.
Material and labour for preparation of old painted steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
Supply and fix 4mm thick sheet glass, ordinary quality with Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers and glazing with oil putty or rubber beadings, clips, aluminium beadings in aluminium frame in square/rectangle exc 0.5 sqm in each pane complete all as specified and directed.
Materials and labour for 100mm bore reinforced concrete pipes, class NP2, laid and jointed complete with collars laid in trenches complete all as specified and directed.
Material and labour for cement concrete (1:3:6) type C-2 (using 40 mm graded stone aggregate) as in bed to 100 mm bore drain pipes including packing under and haunching against the sides of pipe after they are laid and tested complete all as specified and directed.
Cutting into existing manholes for connecting new drain pipe of dia 100mm, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete (1:2:4) type B-1 (using 20 mm graded stone aggregate) smooth finished, and reforming benching as required complete all as specified and directed.
Supply and fix 125 / 110 mm size PVC (SWR) gully trap, setting and jointing with solvent cement complete all as specified and directed.
Supply and fix 75 mm dia PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and directed.
Supply and fix 75 mm bore PVC (SWR) junction double, (double ‘T’) equal or unequal with access door complete all as specified and directed.
Supply and fix in repair 75 mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joint laid in trenches or fixed to wall complete all as specified and directed.
Supply and fix 75 mm bore PVC (SWR) bend any radius with access door complete all as specified and directed.
Supply and fix 75 mm bore PVC (SWR) reducer complete all as specified and directed
Supply and fix 75 mm bore PVC (SWR) vent cowl complete all as specified and directed
Supply and fix 15mm bore fancy type pillar tap cast copper alloy with capstan heads, chromium plated, screwed down, high pressure with or without lettered hot or cold with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed.
Supply and fix 15mm bore long body, fancy type, chromium plated, bib tap, cast copper alloy with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as specified and directed.
Supply and fix PVC connection pipe 15 mm size with PTMT nuts at both ends of length 600 mm complete all as specified and directed.
Supply and fix sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.
Supply and fix soap dish, brass chromium plated, fancy type complete all as specified and directed.
Supply and fix vitreous china white wash down water closet pan (pedestal pattern) with ‘P’ or ‘S’ trap, front or back inlet, fixing bolts and making all necessary connections including plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete as specified and directed.
Supply and fix health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.
Supply and fix 10 ltr capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and flush pipe complete all as specified and directed.
Supply and fix vitreous china urinals, Half stall type, white flat back of size 590x390x375 (back or corner wall type) complete including providing and fixing plugs, bedding urinal against wall in cement mortar (1:2), securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe), incl CP waste coupling and CP Urinal spreader for fixing with 15 mm dia pipe complete all as specified and directed.
Supply and fix counter top oval shaped vitreous china white Wash Hand Basin of size 560mmx410mm fixed to granite/marble top slab, including cutting for and pinning in including 32mm dia bore waste fitings cast copper alloy chromium plated with long screwed shanks and flynuts flange and beded in red lead cement, 32mm dia PVC waste pipe including 15mm dia fancy type chromium plated cast copper alooy long body Pillar tap with capstan heads, screwed down high presuure, with or without lettered hot or cold with long screwed shanks and fly nuts, screwed for iron/CPVC pipe/fittings complete all as specified and directed.
Supply, hoist and fix 500 litre capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) all as specified in SSR Part-I complete all as specified and directed.
Supply and fix 32 mm dia low density polyethylene (LDPE) pipes of pressure rating 6 kgf/sqcm complete all as specified and directed.
Supply and fix brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.
Supply and fix 20mm dia ball valve high pressure high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum weight 210 gm) complete all as specified and directed.
Supply and fix 15 mm bore steel tubes medium grade, galvanised, with all fitting and fixed to walls, ceilings, roofs or laid in floors complete all as specified and directed.
Supply and fix 20 mm bore steel tubes medium grade, galvanised, with all fitting and fixed to walls, ceilings, roofs or laid in floors complete all as specified and directed.
Supply and fix 20mm bore gun metal globe or gate valve, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.
Supply and fix brass chromium plated shower rose 125 mm size with or without swivel joint complete all as specified and directed.
Supply and fix stainless steel 25mm dia curtain rod fancy type with side end holder with stainless steel brackets fixing on brick/concrete wall with screws complete all as specified and directed.
Material and labour for flame proof light/fan point wiring (concealed type) with single core PVC insulated unsheathed multistranded FRLSH copper conductor cable of 1100 volts grade size 1.5 sqmm (nominal area) in and including 20mm dia heavy duty rigid non metalic PVC conduit with accessories including 1.2mm thick pressed steel terminal boxes in recess to existing wall surface with 3mm thick bakelite sheet top cover (ISI marked) fixed with chromium plated brass screws and cap washers suitable for housing flame proof switch with all fittings and fixing materials with one single core PVC insulated unsheathed 1.5 sqmm (nominal area) multistranded FRLSH copper conductor cable of 1100 volts grade as earth continuity wire and connected to earth dolly complete all as specified and directed. Note: Red coloured cable shall be used for live connection, black coloured cable shall be used for neutral connection and green coloured cable shall be used for earthing. Separate cable for earthing and neutral to be used for each individual circuit from the distribution board.
Material and labour for light/fan point wiring (concealed type) with single core PVC insulated unsheathed multistranded FRLSH copper conductor cable of 1100 volts grade size 1.5 sqmm (nominal area) in and including 20mm dia heavy duty rigid non metalic PVC conduit with accessories including 1.2mm thick pressed steel terminal boxes in recess to existing wall surface with 3mm thick bakelite sheet top cover (ISI marked) fixed with chromium plated brass screws and cap washers suitable for housing switches, sockets and regulators with all fittings and fixing materials with one single core PVC insulated unsheathed 1.5 sqmm (nominal area) multistranded FRLSH copper conductor cable of 1100 volts grade as earth continuity wire and connected to earth dolly and including taking down old unserviceable existing point wiring with all fixtures such as switches, sockets etc.complete all as specified and directed. Note: Red coloured cable shall be used for live connection, black coloured cable shall be used for neutral connection and green coloured cable shall be used for earthing. Separate cable for earthing and neutral to be used for each individual circuit from the distribution board.
All as per item No. 102.00 here-in-before but for one five pins 5 Amps switch socket outlet point on independent board and -ditto-.
All as per item No. 102.00 here-in-before but for one five pins 5 Amps switch socket outlet point on same board and -ditto-.
All as per item No. 102.00 here-in-before but for 15 amps socket outlet with 2.50 sqmm PVC insulated (FR-LSH) unsheathed copper cable multistranded conductor 1100 volts grade including 2.50 sqmm PVC insulated (FR-LSH) unsheathed copper cable multistranded conductor 1100 volts grade as earth continuity conductor and connecting to common earth dully and -ditto-.
All as per item No. 102.00 here-in-before but for metal clad industrial socket with 4.00 sqmm PVC insulated (FR-LSH) unsheathed copper cable multistranded conductor 1100 volts grade including 4.00 sqmm PVC insulated (FR-LSH) unsheathed copper cable multistranded conductor 1100 volts grade as earth continuity conductor and connecting to common earth dolly and -ditto-.
Supply and fix switch piano one way 5/6 amps 240 volts, single pole complete all as specified and directed.
Supply and fix switch socket combination 2 in 1, 5 pin , 5 amps flush type complete all as specified and directed.
Supply and fix switch socket combination 5 in 1, 5/15 amps socket complete all as specified and directed.
Supply and fix socket outlet 2 in 1, 3 pin 5 Amp flush type complete all as specified and directed.
Supply and fix ceiling rose, 3 terminals, fabricated of PVC / Polycarbonate, isolated body complete all as specified and directed.
Supply and fix delux stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc complete all as specified and directed.
Supply and fix flameproof switch LM6 body, rotary switch, SP, 16 Amps , IP66 protection die cast aluminium alloy for ON/OFF light / fan point to operate on single phase 230 Volts, AC with termination box certified by CIMFR and PESO certified IS-2145 complete all as specified and directed. Make : Sudhir /Bajaj/ Crompton Greaves.
Material and labour for flame proof flexible metalic hose conduit 20mm dia 300mm long for exhaust fan/ flame proof light fitting connection from ceiling rose complete all as specified and directed. Make : Sudhir /Bajaj/ Crompton Greaves.
Material and labour for concealed sub-main wiring comprising single core , 2 runs of 4 sqmm nominal cross sectional area, FRLHS multistranded copper conductor cable, PVC insulated unsheathed 1100 volts grade drawing in 20mm dia heavy duty PVC conduit and its fittings complete including provision of 1run of 4 sqmm nominal cross sectional area single core FRLSH multistranded copper conductor cable, PVC insulated unsheathed 1100 Volts grade as earth wire including taking down old unservicieable sub-main wiring complete all as specified and directed. Note :- (a) Extra length of cables/ wire required for connection to MCBs/DB's shall be included in quoted rate. (b) Quoted rate shall be included for cuttings /chasing the wall and making good disturbed surfaces.
Material and labour for concealed sub-main wiring comprising single core , 2 runs of 6 sqmm nominal cross sectional area, FRLHS multistranded copper conductor cable, PVC insulated unsheathed 1100 volts grade drawing in 25mm dia heavy duty PVC conduit and its fittings complete including provision of 1run of 6 sqmm nominal cross sectional area single core FRLSH multistranded copper conductor cable, PVC insulated unsheathed 1100 Volts grade as earth wire including taking down old unservicieable sub-main wiring complete all as specified and directed. Note :- (a) Extra length of cables/ wire required for connection to MCBs/DB's shall be included in quoted rate. (b) Quoted rate shall be included for cuttings /chasing the wall and making good disturbed surfaces.
Supply and fix in repair sheet metal enclosure SPN DB 4 ways double door having facility to fix MCB in incomer and MCBs in outgoing, metal door IP-43 type complete fitted with bus bars, neutral links, blanking plates including making good disturbed surfaces complete all as specified and directed.
Supply and fix in repair sheet metal enclouser SPN DB 8 ways double door having facility to fix MCB in incomer and MCBs in outgoing, IP-43 type complete fitted with 200 Amp rated bus bars, neutral links, blanking plates including making good disturbed surfaces complete all as specified and directed.
Supply and fix in repair MCB SPN, 240 Volts, 40 amps, "C" series, breaking capacity 10 KA complete all as specified and directed.
Supply and fix in repair MCB SP, 240 Volts, of 6 to 32 amps current rating, 10 KA breaking capacity "C" series complete all as specified and directed.
Supply and fix sheet metal enclosure VTPN DB 4 ways double door having facility to fix MCCB in incomer and MCBs in outgoing, IP-43 with metal door type complete fitted with bus bars, neutral links, blanking plates etc.complete all as specified and directed.
Supply and fix MCCB 100 Amps current capacity, 415V, 16 KA, 4 Pole, with adjustable thermal and magnetic type complete all as specified and directed.
Supply and fix in repair plug and socket type DB (functional unit) 20 Amps capacity with provision of single pole 20 amps MCB, plug top and earth plug, grouted flush to walls complete all as specified and directed.
Supply and fix in repair LED lights fittings with extruded aluminium housing, high quality PC diffuser, efficacy- 125lm/W, 20 watt, 4 feet long, 220V, AC, 3000K, CRI ≥80, integrated design including connecting up with flexible copper conductor cable of suitable size complete all as specified and directed. Make:- Crompton /Wipro / Philips/ GE.
Supply and fix in repair 36 W recessed LED ceiling light with glare free uniform illumination, white powder coated CRCA housing, efficacy > 100 lm/W suitable for 600 x 600 mm (2 feet x 2 feet) grid ceiling complete with all accessories including internally prewired connecting upto flexible copper conductor cable of suitable size complete all as specified and directed. Make:- Crompton /Wipro / Philips/ GE.
Supply and fix in repair flame proof / weather proof LED 2 x 20W, 4 feet, 230 V tube light fitting with lumen output not less than 4000 Lumens, body made out of cast aluminium alloy LM6 construction certified by CIMFR, BIS & PESO including suitable electronic including necessary fixing arrangements and connecting up complete all as specified and directed. Make: Sudhir /Bajaj/ Crompton Greaves.
Supply and fix in repair 200 Watt rectangular LED flood light fitting made up of pressure die cast aluminum housing with toughened glass and high power LED ,IP- 66, 5700K, 230 Volt, 4KV internal surge protection 10KV SPD complete all as specified and directed. Make:- Crompton /Wipro / Philips/ GE.
Supply and fix flame proof exhaust fan having sweep size of 305 mm having air discharge capacity of 1120 CFM complete with 0.25HP single phase 240V, 1440RPM capacity of motor duly approved complete all as specified and directed. Make : Sudhir /Bajaj/ Crompton Greaves.
Supply and fix wall mounted fan, metal body AC single phase. 230V of size 450 mm sweep, with, blades, and frames complete all as specified and directed. Make : Crompton Greaves /HAVELLS/ ORIENT/ USHA.
Supply and fix 300mm sweep steel body exhaust fan AC single phase 230/240 volt. 1400 RPM, heavy duty, ISI marked, along with metal blade powder coated metalic finish with louvers, low noise including necessary electric connection with and including cutting/making opening having dia of the hole for 300mm sweep exhaust fan in any type of walls of any description with nut, bolt, washer and making good distrubed surfaces complete all as specified and as directed. Make : Crompton Greaves /HAVELLS/ ORIENT/ USHA.
Supply and fix ceiling fans complete with blades, down rods, and accessories, 230 V, 1200 mm sweep. minimum air delivery 210 CFM with service value 6.00 BEE. 5 star rated with brushless direct current motor (BLDC) complete all as specified and directed. Make : Crompton Greaves /HAVELLS/ ORIENT/ USHA.
Supply, installation, testing and commissioning of energy rating 5 star, inverter split Air Conditioner capacity 2 Ton with indoor and outdoor unit comprising of the following:- (a) Multi-stranded copper conductor wire 3 core, 4.00 Sqmm not less than 3.0 mtrs with copper lugs. (b) Incoming and outgoing high quality copper pipe with foam insulation duly white taped of each size not less than 3.0 mtrs. (c) Key features: - (i) Multi adjustable mode. (ii) High ambient cooling. (iii) Super dry. (iv) Turbo cooling. (v) Anti microbial air filteration. (vi) Eco-friendly refrigerant R-32/ R-410A. (vii) 100% copper. (viii) Sleep mode. (ix) Wide voltage range operation. (x) The ISEER vlaue of Air Conditioner shall be 4.5 (minimum). (xi) Cordless remote - 01 No.
Notes: - (i). Extra copper pipe and multistranded copper conductor wire required for Air Conditioner to be installed on parapet wall of building roof top shall deemed to be included in quoted rate. (ii). Rate for scaffolding/ladder/tools and plants required to install Air Conditioner i.e. for making holes to wall, drilling, making good disturbed surfaces and matching with the existing colour shall deemed to be included in quoted rate. (iii) Outdoor unit should be kept above the level of Indoor unit. For installaiton of ground floor ACs oudoor should be on wall surfaces and for first floor ACs should be on parapet wall of roof top of the building with out extra cost to the Govt all as directed by Engr-in-chrg. (iv) The MES No should be painted on indoor and outdoor unit with navy blue colour letters of size not less than 15 mm height. Drain pipe should be clamped up to plinth protection. No extra claim should be allowed for drain pipe from indoor unit to plinth protection of outside the building. (v) The quoted rates are also inclusive of making holes in brick/stone wall for installation of Air Conditioner and making good to the exisitng surface with putty and paint in as specified and directed by Engr-in-charge.
Materials and labour for cutting, welding, bending of MS flat iron of size 30x3mm for making clamps of required shap and size as per site condition including nut & bolts and applying two coats of synthetic enamel paint over a coat of zinc chrome primer complete all as specified and directed.
Material and labour for earthing complete with GI earth plate electrode of size 600 x 600 x 6 mm thick buried directly in ground with earth pit not less than 2.25 meter deep below ground level with top edge of plate not less than 1.5 meter below normal ground level connected to GI wire 4 mm dia earth lead by means of nuts, bolts, check nuts, washers of galvanised iron as steel, protected by 15 mm bore HDPE pipe of pressure rating 6 kgf/cm2 including cement concrete (1:3:6) type C-1 earth pit with precast RCC (1:1.5:3) type A-1 cover slab of size 42 x 42 x5 cm thick reinforced with 8mm dia TMT bars @ 15 cm c/c both ways with 10mm dia mild steel round bar of 30 cm long, bent to shape as lifting handle, funnel, wire mesh, 20 mm bore galvanized iron pipe (medium grade) for watering, earth testing point, charcoal or coke and salt in alternate layers with necessary earth work in soft/loose soil complete all as shown in electrical plate No 3 of SSR Part-I including testing on completion including taking down old unservicieable earthing set complete all as specified and directed. Note:- GI wire upto 7.5m length including testing shall be included in quoted rates.
Material and labour for earthing complete with GI earth plate electrode of size 600 x 600 x 6 mm thick buried directly in ground with earth pit not less than 2.25 meter deep below ground level with top edge of plate not less than 1.5 meter below normal ground level connected to GI earth strip of size 32 x 6 mm earth lead by means of nuts, bolts, check nuts, washers of galvanised iron as steel, protected by 40 mm bore HDPE pipe of pressure rating 6 kgf/sqcm all as directed including cement concrete (1:3:6) type C-1 earth pit with precast RCC (1:1.5:3) type A-1 cover slab of size 42 x 42 x 6cm thick reinforced with 8mm dia TMT bars @ 15 cm c/c both ways with 10mm dia mild steel round bar of 15 cm long, bent to shape as lifting handle, funnel, wire mesh, 20 mm bore galvanized iron pipe (medium grade) for watering, charcoal or coke and salt in alternate layers with necessary earth work in soft/loose soil complete all as shown in electrical plate No 3 of SSR Part-I including testing on completion complete all as specified and directed. Note:- GI strip upto 7.5m length including testing shall be included in quoted rates.
Material and labour for aluminium strip 25 x 3.15mm with saddles and fixing screws etc. for roof conductors and down conductors above ground complete all as specified and directed. Note : Joining of aluminium strip shall be made by brazing/soldering.
Material and labour for galvanised iron strip of size 32 x 6mm buried in ground complete all as specified and directed. Note : Joining of GI strip shall be made by welding.
Supply and fix porcelain insulator for supporting or passing of earthing strip from roof / wall including necessary nuts and bolts complete all as specified and directed.
Material and labour for air termination single pointed aluminium rod,12mm dia and 300mm long including necessary fixing arrangment using clamps,nuts and nuts complete all as specified and directed.
Material and labour for test point termination box made of gun metal or phosphorus bronze size 75x75x25 mm drilled and screwed including 3 Nos, 8 mm dia, 25mm long hexagonal heads screw for lighting conductors complete all as specified and directed.
Supply and fix thermoplastic enclosure box of size 300x150x170mm with opaque lid fasteners for tool operation protection of IP-66 for fixing of test point terminal box complete all as specified and directed. Make:- HENSEL / SINTEX / C&S
Supply, laying, connecting and testing XLPE insulated, PVC sheathed, armoured LT electric power UG cable (heavy duty with stranded aluminum conductor) of size 35 Sqmm, 3.5 core, 1100 Volts (earthed) grade, confirming to IS-7098 (Part-I) laid through duct/ pipe / in trench etc. with cable glands & suitable size of aluminium lugs complete all as specified and as directed. Note : Earth work, brick protection and sand cushioning and GI Pipe Shall be measured and paid separately under respective item.
Materials and labour for boring of holes of size up to 40mm dia under road without disturbing the top surface of the road and taxiway for passing through the cable complete all as specified and directed Note-Necessary infrastructure required for boring shall by arranged by the contractor and cost of the same included in quoted rates.
Material and labour for sand cushioning with clean and dry river sand for protection of UG cable with approved sand of uniform thickness. laid dry, filling in trenches and punning down in proper required layers complete all as specified and directed. Note:- Punned down thickness shall be measured for payment.
Material and labour for brick protection cover to underground cables with sub class ‘B’ bricks of size 23 X 11.5 X 7.5 cm, (locally available best quality), laid dry and flat complete all as specified and directed.
Materials and labour for 50mm dia high density polyethylene pipes (HDPE) of pressure rating 6 kgf/cm2 with all fittings fixed complete to walls, ceilings or in floors etc complete all as specified and directed.
Materials and labour for 40mm dia high density polyethylene pipes (HDPE) of pressure rating 6 kgf/cm2 with all fittings for protection of cables to cross under road, hard standing, pavement etc complete all as specified and as directed.
KUMAR ENTERPRISE
PIONEER
Oenix and associates
SITARAM CONSTRUCTION
BISWAS CONSTRUCTION
BHAUMIK CONSTRUCTION
NC BOSE AND CO
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .