IMPROVEMENTS AND LAND SCAPPING IN FRONT OF OFFICERS MESS AT CGAE KOCHI

S&F for colour powder coated anodised aluminium frame for, doors ,windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S&F for aluminium colour powder coated window ,ventilator of sliding shutter of sectios weighting 0.55kg/m including necessary joining cleats glazing clips rubber packing aluminium snap beading screws anodised aluminiu fittings such as peg stays 150mm longs 01 Nos suitable handles 01 Nos complete all as specified and as directed.

S&F for powder coated aluminium (min thickness of powder coating 50micron)work for doors and partions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make confirming to IS ;1285 fixed with dash fasteners of required dia and size ,or with fixing clips or expension hold fasteners for filling of gaps at junctions,i,e at top,bottom and sides with required EPDM rubber/neoprene gasket etc, support the frames including necessary filling up of tc aluminium sections shall be smooth rust free straight mitred and jointed mechanically whatever required including cleat angle,aluminium snap beading for glazing/panelling C.P brass/ stainless steel screw, including all necessary hardware fittings partion/ doors complete all as directed .

M&L for 18 to 20 mm granite slab of any size for window jambs,counter top and similar work over and including 15 mm thick screed bed or bedding layer of cement mortar 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rounding the edges complete all as specified and directed .

Material & Labour for providing and fixing stainless steel (Grade 304) made of hollow tubes any size and any dia channels plates for gates etc and similar work including , welding grinding buffing polishing and making curvature (where ever required) and fitting the same with necessary stainless nuts and bolts complete inc, fixing the railing with necessary accessories & SS dash fasteners SS bolts ss rollers solid and similar work.. etc,. of required size on the top of floor or the side of waist slab with suitable arragement complete all as specified

S&F for 4.80mm thick pain glass pane reuired colour and size including all necessary hardware fittings partitions,doors /windows complete all as directed. Make: saint gobin/modiguard

S&F for stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples and including dismantling of old mesh complete all s specified and directed.

Dismantling floor, stone, hearth or wall tiling including cement mortar bedding but not backing, removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for 25mm thick PCC 1:2:4 Type B0 (12.5mm Graded Stone Aggregate) as in sub floor etc., including rough top surface to receive floor finish complete all as specified and as directed.

Material and Labour for glossy finish coloured vitrified ceramic tiles 8-10 mm thick of area of each tiles not exceeding 0.42 sqm but not exceeding 1.0 Sqm, of any shade of any pattern (pattern consists combination of two or more tiles ) as in vertical surfaces etc jointed in neat cement slurry and pointed in colored cement to match colour tiles over and including 10mm thick back coat in CM 1:4 and pointed in coloured cement to match coloured tiles complete all as specified and as directed.

M&L for 8 to 10 mm thick ceramic joint free Coloured Tiles, of size 600x100/150mm, on vertical surface/Skirting over and including 10mm thick rencering in CM 1:4 Laid and Jointed in Neat Cement Slurry and Pointed in white cement with pigment to match the shade of the Tiles, complete all as specified and as directed.

Supply and fix 12mm thick toughtened glass, crystal polished in squares exceeding 0.5 Sqm in each pane as door with locking arrangemnt on pivot hanging,working table top fixed and smilar work etc,.with adhesive of high quality complete all as specified and as directed .

S&F for extruded brass handes of 600mm long fabricated type(25 mm dia) polished /high glossy including all necessary fittings and fixture complete all as specified and directed.

S&F for aluminium die cast of door closer hydraulically regulated designed No 3 universal type suitable for door shutter size of 850mm to 1000mm in width weight between from 61 to 80kg and fixed Make: Sandhu, Everest

Supply and fix Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium ally sheet foundation box, main body with stainless steel cover, governing pivot made of brass, with locking arrangement other parts made of mild steel heavy duty and fixed complete all as specified and directed.Make: Sandhu, Everest

S&F of 4mm thick sheet glass for window/ventilators ordinary quality and glazing with rubber beading/oil putty in square exc 0.50 Sq.m in each pane complete all as specified and as directed.

M&L for rendering 15mm thick in cement mortar 1:6 on other than fare face of brick work or concrete surfaces and finishing the surface even & smooth without using extra cement including taking down cement plaster on any height complete all as specified and directed.

M&L for preparing new surfaces of walls and applying two coats of Oil bound distemper on new surface complete all as specified and directed.

M&L for preparing old distemper and painted surfaces of walls including washing rubbing down and brooming down smoke soot mould mass and applying one coats of Oil bound distemper old surface complete all as specified and directed.

Demolition of brick work or stone masonary built in cement mortar including all quoins, arches, pillars etc.complete all as specified and directed

M&L for precast cement concrete hollow solid blocks exc 10cm width Masonry type 1:3:6 (16 mm using aggregate as per IS 383) set in cement mortar 1:6 all as specified and as directed .

M&L for precast cement concrete solid building blocks or slabs 10mm thick typeC1,1:3:6 (20 mm Aggregate) in walls set in cement mortar 1:6 all as specified and as directed .

M&L for rendering 15mm thick in cement mortar 1:4 on other than fare face of brick work or concrete surfaces and finishing the surface even & smooth without using extra cement on any height complete all as specified and directed

M&L for applying two coat of exterior Acrylic emulsion paint (100% acrylic) of approved colour and shade over a coat of primer and over 1 to 2 mm thick birla putty punning including preparation of new plastered surface complete all as specified and as directed by Engineer-in-charge. Make-Asian (Apex Ultima) paints/Berger (Whether coat long life) including necessary scaffolding

Demolition of Cement Concrete (un-reinforced) of any description, not exc. 150mm thickness (above or below Ground Level) and removing the same from Site(s), complete all as specified and as directed.

M&L PCC 1:3:6 type C-1 using 20 mm graded stone aggregate for filling in bed block of hold fast etc complete all as specified and as directed.

M&L in repair chequred cement concrete tiles 30 cm x 30 cm x 25 cm thick set and jointed and pointed in neat cement slurry with grey cement and pigment in floors including 20 mm screed bed in CM 1:6 complete all as specified and directed.

M&L for preparation of the old painted surfaces of steel and iron work of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Removal of debris/malwa to a distance exc 1.5Km but n exc 5 Km and depositing out side the MD land and as directed .

S & F mild steel work as joints angles,channel or tee sections fixed independetly with out connecting plates conforming to Fe-410 W or grade E-250 quality -A complete all as specified and directed.

M&L for applying two coats synthetic enamel paint over a coat of red oxide/zinc chrome primer including preparation of new steel/iron surfaces exc 10cm in width or girth all as specified and as directed.

M&L for pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed in repair with self tapping J hooks or welding complete all as specified and directed.

M&L in repair for roofing tiles of mangalore pattern interlocking laid dry and at side jointed including applying of one coat of exterior antifungal paint approved colour and dismantling of tiles complete all as specified and directed.

M&L in repair for ridge or hip tiles to suit mangalore pattern roofing tiles bedded and jointed with lime mortar 1:3 or cement mortar in CM 1:6 including applying of one coat of exterior antifungal paint approved colour complete all as specified and directed.

Supply and fix Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including necessary hangers 6mm dia GI up to1200mm length adjusting level fixed to roof slab by means of cleats made out of FI 40x3mm size 60 cm long and expansion holdfast 12.5mm dia 40mm long with and including PVC profile ceiling of surface laminated any pattern and any shade of 7 to 10 mm thickness and any colour completely all as specified and as directed.

S&F to providing and fixing 0.71 mm thick Aluminium alloy colour coated plain sheets of aluminium alloy IS designed31500,temper H x 8 confirming to IS 737 and dimension as per IS code 2676 with character sticks of good formability and Corrsion resistance clading to column and poles and similar work at all height,level and location or curvature including all fittings and fixture complete all as specified and directed

M&L for preparing the surface of soil by spreading , levelling 15cm thick red earth / moorum obtained from outside MD land laid in layers not exc.15cm thick , spreading. Levelling ,watering for planting grass with and including supply and laying one layer of pesticides mixed with organic manure in 1:3 propotion and supply and planting Mexican grass turfing , well watered and removing weeds etc including manure and maintaining the same for 24 months from the certified date of completion including judicious punning of plants etc.The rate quoted shall be deemed to be inclusive of supply of water.

M & L for point wiring with PVC insulated unsheathed multistranded copper conductor cable 1100 volt grade, FRLS of size 4 Sqmm drawn in and including PVC caping and casing of size not less than 20 mm dia with accessories (concealed) including modular metal flush box of suitable size with inner and outer white plastic plate (same make of switch and socket) including continuous 4 Sqmm copper conductor (multistranded) PVC insulated and unsheathed cable earth wire to common earth and connected to earth dolly complete all as specified conforming to IS-694 for One 3 pin socket outlet16 Amps on Independant board.

Supply and fixing of Modular Switch socket combination 16 Amps, 6 pin, 3 module complete all as specified and directed

Supply and fixing MCB SPN 40 Amp rating 240V, 10 KA 'C' curve Miniature Circuit Breaker (MCB) of single pole in the MCB DB complete with connection testing and commissioning complete all specified and directed.

Supply and fixing sheet metal enclosure distribution board (DB), when MCB to be used, dust and vermin proof, Triple pole and neutral (TPN) 4 way with 200 Amps rated copper bus bar double door protection, neutral bar, earth bar, Triple pole and neutral 240 volts, MCBs used as incommer Double door, flush to wall complete all as specified and directed.

Supply,laying and testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade Earthed with stranded aluminium conductor of size 16 Sq.mm 4 core all as specified and directed

Excavation in trenches not exe. 1.5 m in width and n.exe.1.5 m in depth as in trenches and getting out in soft soil complete all as specified and directed

Returning, filling in including spreading and levelling watering andwell ramming in layers not exe. 25cm with soil obtain from excavation complete all as specified and directed

Removing excavated soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting pointcomplete all as specified and directed.

Supply,spreading and levelling clean dry sand in trenches all as specified for cable protection complete all as specified and directed.

Supply and laying unreinforced precast concrete cable cover,class LV,Type I, flat ,size 250mm x 150mm x 40mm complete all as specified and directed.

Schedule of Credit (Minus) Rs.1500.00 NOTE: Bidder shall insert credit amount of Rs. 1500.00 as rate in Green field under Col-13.