Balance work of Rythu Bazar Jangareddygudem of A.M.C, Chintalapudi in Eluru District

Earth work excavation and depositing on bank not less than one meter from the outer edges of the excavation, but shall be placed any where within 10mts.lead and 2mts. Lift as directed by the departmental officers in all soils up to excluding ordinary rock forming, whenever necessary dressing the bottom of foundations to level in all directions, well watered and thoroughly rammed before laying concrete etc., complete as per standard specification and as directed by the departmental officers.

Filling with Sand in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick, consolidating each deposited layer by watering and ramming including cost and conveyence of water to the work site and all operational, incidental, labour charges, seignorage charges, hire charges of T & P etc., complete For finished item of work.

Filling with Cruher Dust in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick, consolidating each deposited layer by watering and ramming including cost and conveyence of water to the work site and all operational, incidental, labour charges, , hire charges of T & P etc., complete For finished item of work.

Plain cement concrete equivalent to (1:5:10) proportion nominal mix (cement: fine aggregate: coarse aggregate) using 40mm size Hard Blasted Granite (IS383, 1970) metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including on all materials, all operational, incidental, and labour charges such as mixing, laying and ramming concrete in layers in position not exceeding 15cm, finishing top surface, curing concrete, etc., complete For finished item of work For foundations and flooring Bed.

Vibrated Cement Concrete M20 Nominal mix equivalent to (1:2:4) proportion (cement: fine aggregate: Coarse aggregate) using of 20mm HBG (IS383, 1970) Machine Crushed graded metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including on all materials, all operational, incidental and labour charges such as mixing, laying, curing concrete, etc., complete For finished item of work

For Coloumns For Basement Level

For Lintel Beam

For Roof Slab 100mm thick

Providing High Yield Strength Deformed steel bars (Fe 500 grade ) of different diameters, including labour charges for cutting, bending to required sizes and shapes placing in position with cover blocks of approved materials and size and tying with binding wire of 20SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, welded joints, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc., complete for finished item of work

Providing impervious coat to exposed RCC roof slab surface with CM(1:3), 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost of all materials, excluding conveyance charges of materials and including all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc,, complete for finished item of work

Plastering with C.M (1:3) 12 mm thick including cost and conveyance of all materials to site from approved sources, including providing and removing necessary scaffolding, labour charges, curing with all water leads and finishing smooth to perfect plumb including all other incidental and operational charges etc., complete as per standard specification and as directed during execution by departmental officers.

Brick Masonry in superstructure with CM (1:6) prop: using traditional second class bricks of sixe 23x11x7cms from approved source having minimum crushing strength of 35 Kg/Sqcm. including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, including on all materials, all operational, incidental and labour charges such as mixing cement mortar, constructing masonry, scaffolding charges, lift charges, curing, etc., complete For finished item of work.

Super Structure

Plastering with CM(1:5) Prop: 12mm thick in single coat including cost and conveyance of all materials like cement, sand, water etc., to site, all operational, incidental charges and labour charges such as mixing mortar, finishing, curing, etc., complete For finished item of work. (Up to 3m)

Plastering with CM(1:5) Prop: 20mm thick in single coat including cost and conveyance of all materials like cement, sand, water etc., to site, all operational, incidental charges and labour charges such as mixing mortar, finishing, curing, etc., complete For finished item of work. (Up to 3m)

Supply and fixing of 16mm dia Holding down bolts 4 no's 0.60mt length of each including cost of bolts and all materials and labour charges For fabrication charges etc., including 3" threading at exposed as directed by the Engineer-In_Charge

Fabrication and supply and errection of Square Hallow section 40x40x2.60mm pipes for ladder type Truss of top rafter 3.50Mts span and bottom rafter 2.75mts span and for internal members for rafters 0.23 mts long and 0.30 mts @ c/c, including 8mm thick 2 no's base plate of size 0.23X0.23 4 no's of guest plates of size 0.15X0.10 mts, 10 no's of 6 mm thick cleats of size 0.125X0.05, 4 no's dummy plates and including necesasary bolts and nuts etc.,including fabrication & errection charges etc., complete for finished item of work.

Supply and fixing of M.S Hallow sections roof purlins of 60X40mmX2.60 of 4.00 mts long by welding of 5mm plates of size 60mmX40mm dummies both side of pipes 0.50X0.50mm L angles For fixing of poles in position with necessary bolts,nuts,washers including cost of pipes welding cutting loading, unloading charges abd transportation charges etc., complete For finished item of work as directed by the department

Roofing With 0.5mm thick galvanized /pre painted G.I profiled (Tiles Profile) sheets fixed to the purlins With 14 size self drilling with neoprene washer Side laps are stiched with self tapping drilling screws .End laps are to be sealed with 25x3 mm Butyl tape .the sheets are provided with anti capillary groove.including cost and labour charges etc., complete as per standard specification For finished item of work.

Laying and fixing of Reflected precast concrete blocks For paving of M35 grade and thickness not less than 60mm For medium traffic areas confirming to IS 15658 :2006 in all shapes and designs as per manufactures specification including cost and conveyance of all materials and all labour charges For loading and unloading, laying to desired lines and levels complete excluding cost of cement, sand, water, electricity etc. complete For finished item work as directed by the Engineer - in - charge at site.

VCC M20 Nominal mix using with 20mm graded metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges etc., complete for finished item of work as per standard specifications.

Painting to New Work with two coats of Plastic Emulsion paint of superior quality of approved brand and shade over a base coat of Wood primer ( 3 coats) in all to give an even shade after thoroughly brushing the surface to remove all loose materials, including cost and conveyance of all materials, including cost and conveyance of all materials, cost of brushes, water to site, etc., sales & other taxes, all operational, incidental and labour charges such as scaffolding charges, lift charges, curing etc., complete For finished item of work

Painting two coats with synthetic enamel paint first grade to new iron work including one coat of red oxide paint for New Iron work including cost and conveyance of all materials to site, sales , incidental, operational and all labour charges etc., complete for finished item of work.

Supply and fixing rolling shutters made of 80x1.25mm machine rolled CRCA laths, interlocked together through their entire length and jointed together at the ends by endlocks, mounted on specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets,plates,guide channels, stoppers, bottom lockpng plates and arrangements For inside & out side locking with push-pull operation including cost of hood cover and springs complete, painted with one coat of approved steel primer,locks, ball bearings, all accessories etc., complete For finished item of work.

Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) made of (small series) frame 92 x 44 mm & sash 32 x 60 mmboth having wall thickness of 1.9 ± 0.2 mm and single glazingbead of appropriate dimension (Area of window upto 1.75 sqm). BMT-P.80B

Supply and fixing of WPC Door Frame section of 63.5x100 MM with 28 -30 MM thick WPC single extruded door shutter including cost of Shutter and labour charges for fixing including cost of steel butt hinges, Steel Tower bolts, Steel Handels, and including cost and conveyace all materials and labour charges for fixing etc., complete for finished item of work as directed by the departmental engineer-in-charge at site.

Flooring with Vertified Tiles of 1st. quality of any shade as approved by Engineer - in - charge set over a base coat of CM (1:8) 12mm thick laid over flooring bed / V.R.C.C. slab, with neat cement slurry of honey like consistency spread at the rate of 3.3 Kgs of cement per Sqm and jointed with neat white cement paste to full depth mixed with pigment of matching shade including cost of all materials like cement, sand, water, ceramic tiles etc. to site, on all materials, all operational, incidental and labour charges such as mixing of cement mortar, laying, curing, lift charges etc., complete For finished item of work.

Flooring with ceramic tiles, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete for finished item of work.

Dadooing to internal walls with ceramic tiles length equal to flooring stones, set over base coat of CM (1:3) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like Cuddapah stone, cement, sand and water etc., complete for finished item of work.

Supply and Fixing of 25mm outer dia (1.60 to 1.80)mm thicknes medium grade with IS:9537 part 3 FRLS rigid P.V.C. pipe (ISI marked) surface on wall with all required MS junction boxes and all accessories including masonary work for light, bell, fan, and separate plug point with hot dip galvanized 20/18 SWG MS modular metal switch box with earthing terminal including all labour charges etc., complete. Makes : Precision/Universal& Marudhar/VIP / GoldMedal / Million plast / GM / Sudhakar /Polycab/AKG

Supply and Fixing of 25mm outer dia (1.60 to 1.80)mm thicknes medium grade with IS:9537 part 3 FRLS rigid P.V.C. pipe (ISI marked) concealed in wall with all required MS junction boxes and all accessories including masonary work for light, bell, fan, and separate plug point with hot dip galvanized 20/18 SWG MS modular metal switch box with earthing terminal including all labour charges etc., complete. Makes : Precision/Universal& Marudhar/VIP / GoldMedal / Million plast / GM / Sudhakar /Polycab/AKG

Wiring with 2 runs of 22/0.3mm ( 1.5 Sq.mm) FRLS / FRLSH / HFFR / ZHFR P.V.C. insulated 1100V grade as per IS : 694 / 1990 specification flexible copper cable (ISI marked) in existing pipe with 6A Modular switch (ISI marked) with cover plate, Ceiling rose/BH/ SBH, including all labour charges etc., complete for Light, Bell, Fan and Exhaust Fan points etc., complete. (for Non Residential Building). Makes of wires:- Finolex / RR kabel/Havells/KEI/Polycab/ Goldmedal/GM/Million. Makes of switches:- Legrand (Arteor/Myrius) / Schneider (Clipsal X/ Livia AB)/ Crabtree Murano or Ducor/L&T-englaze/ GM-(Four-Five)/ Goldmedal(GIFA)/Million (M-VEE)

Supply and Fixing of 6 Amps modular type (ISI marked) switch, and 6 A 3/2 pin Modular type socket with cover plate on a common switch board including giving all connections and all labour charges etc., complete. Makes of switches/sockets:- Legrand (Arteor/Myrius) / Schneider (Clipsal X/ Livia AB)/ Crabtree Murano or Ducor/L&T-englaze/ GM-(Four-Five)/ Goldmedal(GIFA)/Million (M-VEE)

Supply and fixing of 16A/6A, 2 in one, modular type socket with 16A switch (ISI marked) modular type with cover plate on existing modular metal switch box including all labour charges, giving all connections etc., complete. Makes of Switches/Sockets:- Legrand (Arteor/Myrius) / Schneider (Clipsal X/ Livia AB)/ Crabtree Murano or Ducor/L&T-englaze/ GM-(Four-Five)/ Goldmedal (GIFA)/ Million (M-VEE)

Supply and fixing of Modular type 2- Module, Electronic fan regulator hum free step type socket size in the existing switch board. Makes :- Legrand (Arteor/Myrius) / Schneider (Clipsal X/ Livia AB)/ Crabtree Murano or Ducor/L&T-englaze/ GM-(Four-Five)/ Goldmedal(GIFA)/ Million (M-VEE)

Supply and fixing of batten holder / slanting holder of makes Anchor / Gold medal olive / Million Zoom in lieu of ceiling rose of light point complete with all connections and all labour charges makes Wipro / GE / Philips / Crompton / Bajaj

Supply and Fixing of 20-24W, not less than 1100mm length LED batten light with extruded alluminium / CRCA housing and polycarbonate cover, input voltage AC 220 - 260 Volts with PF>0.9, Surge protection: 2KV, THD<15%, with high power LEDs having efficacy of ≥ 120 lumens / watt with inbuilt and replacable driver with earth connection brought outside and frosted cover CCT: 3000K - 5815K, minimum CRI>70 etc., complete including fixing on wall / Ceiling with PVC/TW round blocks with all accessories including giving connections and all labour charges etc., complete with 5 years warranty. Makes: a) Luminaire make : Phillips / GE-Venture / Crompton / Wipro / Bajaj / Havells b) LED make : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG/LG

Supply and Transportation of 48" (1200mm) Sweep 5 star rated Ceiling Fan , with double ball bearings, air delivery more than 200 cubic meter/min but without Regulator. Makes : Crompton HS Plus / Havells ES PLUS/Orient Energy Star

Supply and run of 3 of 2.5 sq.mm (phase neutral and earth) FRLS / FRLSH / HFFR / ZHFR P.V.C. insulated 1100V grade as per IS : 694 / 1990 specification flexible copper cable in existing MS conduit pipe for individual ligting circuits including labour charges etc., complete as required for switch boards. Makes of wires:- Finolex / RR kabel/ Havells/KEI/Polycab/goldmedal/GM/Million

Providing & Placing on Terrace(at all floor levels) polyethylene water storage tank of Double layer Roto moulded confirming to IS:12701 approved brand & manufacture with suitable cover/cap and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tanks

Supply and fixing of PVC/SWR pipe - 4 Kg/sq.cm pipe of 1828.8 mm (4'-0") Single Socket etc., complete for finished item of work as per standard specifications and as directed by the Engineer - in - charge at site of work.(110mm Dia)

Supply and fixing of Premium make CPVC Pipes and fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" Ashirvad flowgurard SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physical Properties For Hot and Cold Water (IS 15778:2007)

CPVC Pipe 22.20mm dia

CPVC Pipe 28.20mm dia

Supplying & fixing Indian makeflat Back Wash Hand Basin1st quality conForming to IS:2556-Part-4:1972 with waste fittings like rubber plug, chain,32 mm nominal size C.P. fitting with parallel pipe thread conForming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/ Senior/ Nice/ Esso or equivalent complete with standard CI brackets including wooden block: 550 x 400 mm - Single C.P. Pillar cock

Supply and Fixing of CP Short body bib cock fancy type deluxe heavy duty 12.7 mm dia Indian make including cost and conveyance of all materials and all labour cahrges etc., compelete as per standard specification and as directed by the departmental Engineer-in-Charge.

Supplying and fixing European Water Closet of 1st quality conForming to IS:2556-Part-2-1973 ofwhite glazedwith 'P' trap inclduing cost and labour charges etc., complete For finished item of work.

Supplying & Fixing Orissa Pan white glazed W.C 1st quality ISI marked conforming to IS:2556-Part-3-1981 with"P" or "S" trap: 580 mm x 440 mm (BMW-D.04)

Supply & fixing of PVC low level systemwith internal components & short bend:10 Litres capacity Single Flush including cost and conveyance of all materials, labour charges etc., complete for finsished item of work

Supply and fixing of 50mm thick Jali including cost and conveyance of all materials to site, sales & other taxes, all operational, incidental and labour charges etc., complete For finished item of work.

Filling with Gravel in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick, consolidating each deposited layer by watering and ramming including cost and conveyence of water to the work site and all operational, incidental, labour charges etc., complete For finished item of work.

Supply anf fixing of 450mm dia NP 2 class RCC socket and spigot pipes includibg conveyance of 5.00km lead including all labour charges etc., complete.