Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.6 LAccepted-AOC | ₹2.6 L Quoted ₹2.7 L | L1 | Accepted-AOC Being L1 and reasonable |
| 2 | L2₹2.8 L+₹10,460 (3.87%)Rejected-Finance | ₹2.8 L+₹10,460 (3.87%) | L2 | Rejected-Finance Other than L1, hence rejected |
| 3 | L3₹3.7 L+₹1.0 L (38.7%)Rejected-Finance | ₹3.7 L+₹1.0 L (38.7%) | L3 | Rejected-Finance Other than L1, hence rejected |
Tender Value
Refer Docs
EMD Value
₹7,600
Closing Date
17 Jul 2021, 6:00 pmClosed
AGE (I) Naya Raipur
AGE (I) Naya Raipur Military Engineer Services C/O HQ COSA Near International Cricket Stadium Atal Nagar, Distt-Raipur (CG) Pin - 492101
REPAIRS TO PATHWAY, FENCING POST, FENCING, BARBED WIRE, COMPOUND WALL AND GATES, HARDSTANDING AT KOTA RAIPUR MIL STN UNDER AGE (I) NAYA RAIPUR
2021_MES_452256_1
8400/296/E8
Open Tender
Civil Works
Item Rate
120 days
AGE (I) Naya Raipur
Please refer tender documents
7 documents required · 7 mandatory
₹300
AGE (I) Naya Raipur
₹7,600
28 Jul 2021
17 Jun 2021
19 Jul 2021
17 Jun 2021
17 Jul 2021
3 Jul 2021
Amount
M&L for Demolition of cement concrete un-reinforced Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed.
M&L for Demolition of cement concrete reinforced of any description and in any position not otherwise specifically provided for complete all as specified and as directed.
Demolition of brickwork built in cement mortar with all quinces the cleanly etc complete all as specified and as directed.
M&L for dismantling posts or struts (wood, steel or RCC) any section, including taking out embedded portion and making good disturbed ground posts embeded in concrete, brick work, masonry etc complete all as specified and as directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.
M&L for dismantling fencing wire mesh, any type complete all as specified and as directed.
M&L 100 mm thick PCC (1:4:8) type C2 (using 40mm graded stone aggregate) as in Sub basefinish the cement concrete surfaces complete all as specified and directed.
M&L for 50 mm thick Plain cement concrete 1:2:4 type B1 (using 20mm graded Stone aggregate) as in floors, footpath, finishing cement concrete surface and spike rolling to surfaces or making impression of expended metal,whilst the concrete is green complete all as specified and directed.
M&L 75 mm thick PCC (1:3:6) type C2 (using 40mm graded stone aggregate) as in plinth protection finish the cement concrete surfaces complete all as specified and directed
M&L for cement concrete type C2 1:3:6 (40mm graded aggregate) as in foundations.
M&L for cement concrete type D2 1:4:8 (40mm graded aggregate) as in foundations.
M&L brick work with modular fly ash bricks straight or curved on plan exc 6m mean radius wall built in cement mortar 1:6 complete all as specified and as directed by EIC.
M&L for PCC type B-0 (using 12.5 m graded stone aggregate )as in coping etc all as specified.
Taking down cement or cement lime plaster, any description, on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.
M&L for rendering 15 mm thick plaster in CM (1:6) on brick or concrete surface mixed with water proofing compound as per manufacturer instruction finished all as directed (only WPC shall be measured and paid separately) complete all as specified and as directed.
Supply only integral water proofing compound complete all as specified and as directed.
M & L for preparation of newly plastered surface of wall and applying two coat of cement base paint over a coat of alkali resistant priming paint complete all as specified and as directed..
Material & labour for Framed work as in doors or gates of angle or other section with gusset plates,rails ,braces,etc,complete drilled for fixing of steel sheeting or other covering ,Doors etc .to be prepared for hanging or sliding with and including either hookes and hinges or steel hanging doors fittings (exclusive of steel Steel covering running rails and guides ) and hanging also fastening and fixing including pintels complete all as specified and direted.
M & L Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors;ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed.
S&F galvanised two strand barbed wire, 2.24mm dia, barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts including securing or tying at crossings with provision of galvanised mild steel wire stapples or steel pins complete all as specified and directed.
Supply only Chain link MS Galavanised fencing any size or type complete all as specified and directed.
M&L fixing olnly chain link fencing including line wires, any mesh, size and type to any type of standards rails, straining bolts, etc including provision of binding wire complete all as specified and directed.
M&L for angle iron / flat iron for fixing chain link or hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and clountersunk for balusters running bars, for doors, balusters, nosing to steps including embneding in concrete and screwing etc wid ties for roof including securing bolts, posts and struts in fencing including cutting tops shape as directed, drilling holes, notching for wire etc flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or reveting etc, and similar work conforming to Fe-290 or Fe-165 complete all as specified and directed.
M&L for prepration of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide on new steel surfaces of any description over 10cm width or girth complete all as specified and directed.
S&F mild screw bolts 11 to 15 mm diameter of neck shank (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to fitted with washers and one hexagonal or square exc. 5cm but n.exc 10cm long complete all as specified and as directed.
Material and labour for RCC 1:2:4 type B1, using 20mm graded stone aggregates as in precast cement concrete for drain cover,cover slab etc and set in cement morter complete all as specified and as directed.
Supply and fix TMT bars10 mm dia and over.as in reinforcement cut to length, bent to shape required including cranking, bending and binding with mild steel wire not less than 0.9 mm dia complete all as specified.
Dismantling floor hearth or wall tilling including cement mortar bedding complete all as spd and directed.
M & L for Renewing cement concrete tiles in patches, area n exc 5 sq.m. including removing and cleaning old tiles, preparing beds and laying or setting, jointing and pointing new or old tiles complete all as spd and directed.
M&L Sand filling under floors or in foundations including watering and consolidation.
M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and no pigment complete all as specified and as directed.
M&L for Providing, cement concrete in roof kerbs or mud stops, rounded or chamfered on edges of cement concrete type B0 1:2:4 using 12.5 mm stone aggregate complete all as specified and directed.
Total contract sum shall be calculated after deduction of schedule of credit amount of Rs. 13,960.00
M/S INDIA ENTERPRISES
m/s ramanuj singh and sons
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .