REPAIR/REPLACEMENT OF WALL PANELING, FALSE CEILING, ROOF SHEET, PARAPETS, PCC COPING AND CERTAIN MISC REPAIRS UNDER AGE B/R-II AT GE (WEST) BAREILLY.

S & F repair wall panelling of plastic vinyl composite of 5 mm thick hollow with wooden/plane surface waterproof , termite proof, chemical resistant of light weight fixed with wooden screw with rawl wall plug complete all as specified and directed.

M&L in repairs 4 mm thick E board tiles for insulation and accoustic purpose 60 cm X 60 cm with and including powder coated galvanium iron snap grid with 32X25X1.5 mm thick tee section and 32X25X1.5 mm thick angle section with all hanging /sopporting arragements as in false ceilling incl taking down old ceiling with frame and making good disturbed surface complete all as specified and directed .

M&L in repairs for POP false ceilig includng GI framing, main member C shaped spacing not exc 1m c/c having weight 300 to 350 gm per RM and cross member U shaped spacing not exc 500 mm c/c having weight 250 to 300 gm/RM and C section fixed on parameter wall with screws and rawl plug including hanging arrateement to RCC slab wth L shape member exc 105 m (wieght not less tha 120 gm/RM) and wire mesh of dia 0.50 to 0.56 mm weight not less than 350 gm/sqm fixed with steel screws of GI framing and applying two coat of luxury emulsion (Royal) and including plaster of paris fancy moulding pattern in corners of ceiling in triangular or any shape of size 75 mm x 75 mm including finished upto the required mark complete all as specified and directed.

Dismanting asbestos cement ( corrugated, semi-currugated etc.) sheets, single layer mangalore pattern or similar tiles in roof covering upto a height of 8Mtrs including necessary scaffolding all as specified and directed.

S & F prepainted galvalume aluminium zink coating GI based semi-corrugated steel sheeting 0.5mm thick of any colour having tensile stength of 550 MPA as in roof covering/cladding to wall fixed with self tapping screws as specified upto a height of 8Mtrs including necessary scaffolding all as specified and directed.

S & F prepainted galvalume aluminium zinc coating GI based corrugated steel sheeting (Allahabad pattern) 0.5mm thick of any colour having tensile stength of 550 MPA as in roof covering/cladding to wall fixed with self tapping screws as specified upto a height of 8Mtrs including necessary scaffolding complete all as specified and directed.

S & F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

S & F 6mm thick, asbestos cement, corrugated or semi-corrugated sheets in roofs, etc. fixed with L Hook or cranked bolts. upto a height of 8 Mtrs including necessary scaffolding all as specified and directed.

M & L Asbestos cement two piece adjustable plain wing ridge 6mm thick fixed with L hooks upto a height of 8Mtrs including necessary scaffolding and working platform all as specified and directed.

Dismantling timber scantlings in fillets, rails, posts, rafters, purlins, etc.under 40 sq. cm in section, in any position complete all specified.

Dismantling timber scantlings in fillets, rails, posts, rafters, purlins, etc.40 sq. cm and over in section, in any position

S & F roof trusses (framed) trussed purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat section) including distance pieces cleats etc confirming to grade Fe-410 W E250 quality A upto a height of 8Mtrs including necessary scaffolding all as specified and directed.

Demolition of brick work or stone/boulders masonry built in Cement Mortar all as specified and directed.

M & L for brick work in CM (1:6) using old size sub class 'B' bricks straight or curved on plan all as specified and directed.

All as per item No 14 above but except bricks all as specified and directed.

M & L for brick work with sub class 'B' bricks straight or curved on plan to any radius in half brick thick walls built in CM 1:4 all as specified and directed.

M&L 15mm thick cement plaster on brick surfaces or concrete surfaces (on external surface) in cm (1:4) newly surface even and smooth without using extra cement and necessary scaffolding all as spd and directed

M&L 12mm thick cement plaster on brick surfaces or concrete surfaces (on internal surface) in cm (1:6) newly surface even and smooth without using extra cement and necessary scaffolding all as spd and directed

M&L 15mm thick cement plaster on brick surfaces or concrete surfaces (on external surface) in cm (1:4) including taking down plaster finishing the surface even and smooth without using extra cement and necessary scaffolding all as spd and directed

M&L 12mm thick cement plaster on brick surfaces or concrete surfaces (on internal surface) in cm (1:6) including taking down plaster finishing the surface even and smooth without using extra cement and necessary scaffolding all as spd and directed

M & L for rendering 5mm thick on ceiling or concrete surfaces in cement mortar (1:3) finished including taking down plaster the surface even and smooth without using extra cement and necessary scaffolding complete all as spd and directed

M & L Preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of Primer complete all as .

M & L for preparing new plastered surfaces of walls and applying 2 coats of OBD on new surface of walls over a coat of Primer and 3mm thick wall care putty complete all as specified and directed.

M & L for applying three coats of white wash on ceiling including preparation of new plastered surfaces complete all as specified and as directed.

M&L for preparation of old plaster surfaces and applying one coat of white wash on walls including necessary scoffolding to required height complete all as specified and directed.

M & L for Complete removal of existing treatment from wall/ ceiling surfaces and rubbing down with sand paper to have even and smooth surfaces complete all as specified and directed.

M&L for applying a layer of 2mm thick wall care putty on wall/ceiling surfaces including rubbing down the surfaces with sand paper after getting dried to obtain a smooth & even surface complete all as specified and directed.

M&L for preparation of old distempered surface of walls including plugging nail holes with cement based putty,making good surface to match existing surface and applying two coat of oil bound distemper complete all as specified and directed.

M&L for preparation of old wall surfaces including making good surface to match existing surface and applying one coat of cement base paint necessary scoffolding upto height of four storeyes complete all as specified and directed.

Demolition of un-reinforced cement concrete in ground floors and paving n.exc 15 cm thickness (below & above ground level) complete all as specified and as directed.

M & L for 75 mm thick PCC 1:3:6 , Type C1 (Using 20 mm graded stone aggregate) as in plinth protection finished even and smooth with out using extra cement including forming joints complete all as specified and directed.

M & L providing cement concrete type B-1 1:2:4 (20mm graded stone aggregate) as in roof curves or muds, stops, rounded or chamfered on edges complete all as specified and as directed.

Taking down chowkats with shutter (without taking off shutters from the frame) n.exc 1.5 Sqm each.

Taking down chowkats with shutter (without taking off shutters from the frame) exceeding 1.50 Sqm but not exceeding 4.00 sqm each complete all as specified and directed.

Taking down of shutter n.exc 1.00 Sqm each all as specified and directed.

Taking down of shutter but exc 1.00 Sqm and n.exc 2.00 Sqm each all as specified and directed.

S & F solid PVC door frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, S & F in opening as per manufacturers instructions and as directed by Engineer-in-Charge.

Supply and fixing factory made solid panel PVC door shutter 30 mm thick (style)consisting of frame made out of MS tubes for top and bottom rail. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail ; panelling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling & fixing in the frame as per manufacturers instructions and as directed by Engineer-in-charge.

S & F 2nd class hardwood plain, solid straight chowkhats and frames, wrought, framedrebated on the solid,rounded or chamfered, puttogether with glue pinned at joints, complete including treating theback of chowkats with coal tar black paint.

S & F 30 mm thick flush shutters solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S &F 2nd class hardwood 35mm thick glazed and skeleton shutters open rebated and prepared to receive glass gauze etc divided into squares, with plain, chamfered or rounded mitred and rebated sash bars any number edges of framing plain, chamfered or rounded, fitted with cut and metered beads for securing glass etc size of members of shutters as specified in SSR Part I Sec 8 clause 8.20 (a)

S & F 2nd class hard wood in fillets, square, rectangular in section wrought, secured with nails sectional area exc 13 Sq cm and n.exc 25 Sqcm fixed in repairs all as specified and directed.

S&F 19mm thick prelaminated particle board solid core construction with block board core and plywood face panels commericials type on both sides.

S & F 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed all as specified and as directed.

S & F 200mm long Aluminium anodised, barrel tower bolts of extruded section and fixed all as specified and as directed.

S & F 150mm long Aluminium anodised, handle of extruded section and fixed all as specified and as directed.

S&F steel butt hinge 100mm long medium weight, mild cold rolled mild steel, and fixed complete all as specified and as directed

S & F in repairs 300mm long MS ordinary rat tail rod pattern springs including roller & roller plate complete.

M & L for preparation of new wooden surfaces of any description ,not other wise described over 10 cm width or girth applying 2 coats of synthetic enamel paint over a coat of pink primer all as specified and directed.

M & L for preparation of new steel surfaces and applying 2 coats of synthetic enamel paint over a coat of red oxide zink chrome primer complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or metal frames, stones, concrete or brick surrounds, glazed with putty or fixed with beads complete all as directed.

S & F 3mm thick sheet glass ordinary quality fixing with putty in square n.exc 0.5 sqm in each pane all as specified and directed.

All as per item No. 52 above but figured glass, pin head type all as specified and directed.

S&L in repairs 5.5mm thick tinted glass, pin head type and glazing in Aluminium Door/Frames in squares n exc 0.5 sq.m in each pane fixed complete all as specified and directed.

S & F fixed in repairs galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with galvanised wire staples all as specified and directed.

S & F galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with galvanised wire staples all as specified and directed.

S&F powder coated aluminium sliding windows frame with movable shutter (sliding on minimum two PVC roller of best quality) for each shutter on three tracks or two track as reuired with stainless steel mosquito proofing and glazing shutter and including 4mm thick glass & stainless steel wire mesh 0.56mm nominal dia of wire fixed with neoprene rubber gasket with aluminium beading, clips, frame made with aluminium section as appended below- (i) Window frame of minimum size : 92 mm x 38 mm X 1.15 mm thick for three tracks. 63mm x 38 mm X 1.15 mm thick for two tracks. Note : The rate for glass & wire mesh shall not be paid separately.

S & F MS framed work such as grills or grating etc with ends of bars welded of anysize and any design all as directed of Fe-290 Grade E-165 all as specified and directed.

M & L for Welding in repairs of iron section or gates exc 2.5cm in length, thickness of metal to be welded exc 9mm but n exc 20mm all as specified and as directed.

M & L for Running welding in repairs iron section or gates thickness of metal to be welded exc 9mm but n exc 20mm all as specified and as directed.

S & F 500 ltrs capacity rotational moulded polythylene triple layered water storage tanks white in colour (cylindrical vertical with closed top) hoisted and fixed in position including dismantling/demolition of existing water tanks of any description all as specified in SSR Part I Make : Vectus/ sintex / Supreme

S&F Rotational moulded polyethylene triple layered water storage tanks of 1000 Litre capacity white in colour (cylinderical vertical with closed top) hoisted and fixed in position including dismantling/demolition of existing water tanks of any description all as specified in SSR Part-I

S&F in repairs 20mm Ball valves high pressure of PTMT with epoxy coated aluminium rod and high dessity plastic ball screwed for iron pipe and fixed ( minimum weight 455 gms) all as specified and as directed.

S&F for 15mm bore galvanised steel water tubing with all fittings 'medium grade' and fixed complete to wall and ceiling or laid in floors incl taking down of old gi tubbing with fittings and cutting chases for concealed water tubing and making good, cutting exceeding 20cm girth where requiired complete all as specified or as directed.

S&F for 20mm bore galvanised steel water tubing with all fittings 'medium grade' and fixed complete to wall and ceiling or laid in floors incl taking down of old gi tubbing with fittings and cutting chases for concealed water tubing and making good, cutting exceeding 20cm girth where requiired complete all as specified or as directed.

S&F in repairs 20mm dia bore Gun metal gate valve with iron wheel head screwed both ends for iron pipe 20mm bore

M & L for 16-18 mm thick Green Marble, machine cut & polished, bedded and jointed in grey cemet slurry including rounding edges and making hole where required and laid over 15 mm cement mortar beddin incl dismantling of existing stone complete all as specified and directed.

S&F in repairs vitreous china urinals bowl type flat back, white 470 x 340 x 265 mm with grating, union for discharge and waste pipe but excluding flushing cistern complete all as specifed and directed.

S&F for CP spreader for urinals complete all as specifed and directed.

S&F in repairs Vitreous china counter top wash basin snow white oval size 560mm x 400mm including PVC waste pipe, PVC connection 450 mm long ,32 mm bore CP waste coupling ,china & plug, brackets etc complete all as specified and directed

S&F in repairs Vitreous china wash down water closet single piece-WC with UF seat cover, hinges, fixing accessories, cistern fittings, size 655x665x760, S trap-300mm including connection to drain pipe etc complete all as specified and directed. Make:- Hindware Cat part No.- 92573, CERA CAMPBELL Cat No S1013105, Kerovit Cat Part No: INSIGNIS KS710, & Asian paints Cat Part No OP-30-TFS.

S&F in repairs water jet for EWC chromium plated with PVC connection complete all as specified and directed.

S&F CP heavy duty extension pieces 15mm bore and 25 mm long in repairs.

S&F in repairs hand shower (health faucet) 1 mtr PVC tube with wall hook complete for ETWC complete all as specified and directed.

S&F in repairs glass shelf with chromium plated brackets of suitable size as per directed by engg-in-charge

S & F in repairs PVC corner set of 3 complete all as specified and directed.

S&F Sheet glass, ordinary quality and glazing with oil putty in square but exc0.5 Sqm in each pane 5.5mm thick incl solar control film 25 micron reflected type stcked to glass pane as per instructions of manufacture

S&F Mortie lock, verticle type size 100 mm mild steel complete all as specifed and directed.

Repairs to steel windows by replacing all old friction hinges with box type hinges, making the windows functional incl all necessary welding etc as required at site and as directed.

S&F in repairs stainless steel plain baskets 15" wide & 6" in depth for kitchen cabinet in repairs.

S&F in repairs stainless steel cutlary baskets 15" wide & 8" in depth for kitchen cabinet in repairs.

S&F in repairs stainless steel large plate baskets 15" wide & 8" in depth for kitchen cabinet in repairs.

S&F in repairs stainless steel small plate baskets 15" wide & 8" in depth for kitchen cabinet in repairs.

S&F Stainless steel cup & saucer baskets 15" wide & 8" in depth for kitchen cabinet in repairs.

S&F in repairs Stainless steel bottle guard baskets 6" wide for kitchen cabinet in repairs.

S&F in repairs Hydraulic chanels 20" long for sliding of SS baskets in kitchen cabinets.

S & F in repairs stainless steel plate rack not less than 5 Kg complete all as specified and as dirrected.

S&F PVC boards 18/19 mm thick any colour/ prelaminated as in cabinets incl Modular kitchen work, shelves and shutters, fixed with screws and adhessive as per direction of Engr-in-Charge and, manufacturer's instructions including piano hinges, magnet catcher, handles etc.

M & L for machine pressed precast 60mm thick interlocking paver block (M-35) cement concrete tiles (Coloured) of approved design & pattern as approved by GE, set over & including taking taking down exising tiles/bricks and providing 50mm sand cushion complete all as specified and directed.

M&L for PCC kerb stone outer coloured surface machine pressed factory made of size 300 mm long , 300mm wide, 150mm thick using M & L for M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete incl form work weathering, slightly rounded or chamfered angles and throating all as specifed and directed

M & L for non- skid ceremic coloured tiles 7 to 8 mm thick (Square / rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match screed bed or bedding layer of mortar over and including M & L for 15mm thick in cement mortar 1:6 for laying floor finishes & removing the rubbish ofmaterial from the premises complete incl dismantling of tiles all as specified.

M & L for non-skid ceremic coloured tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match screed bed or bedding layer of mortar over and including M & L for 15mm thick in cement mortar 1:6 for laying floor finishes & removing the rubbish of material from the premise complete with dismantling of tiles all as specified.

M & L for non-skid ceremic coloured tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm in skirting and dado etc set and jointed in neat cement slurry and pointed in white or coloured cement to match rendering as backing coat of mortar over and including M & L for 10 mm thick in cement mortar 1:4 for laying floor finishes & removing the rubbish of material from the premise complete incl dismantling of tiles and all as specified.

M & L for glazed ceramic tiles, coloured, of size 450 x300x7 mm, as in vertical surfaces such as skirting, dados etc set and jointed in neat cement slurry and pointed in coloured cement to match over and including M & L for 10mm thick rendering layer in cement mortar 1:4 and screed bed or bedding layer of mortar M & L for 15mm thick in cement mortar 1:6 for laying floor finishes & removing the rubbish of material from the premise complete including dismantling of tiles all as specified.

Notes:- Tenderers may note that amount as given in schedule of credit will be deducted from the total amount to worked out the net contract sum at the time of Acceptance of tender.

Please Enable Macros to View BoQ information