PROVIDING, SUPPLYING AND FIXING FURNITURE WORK AND KITCHEN EQUIPMENT FOR SABARMATI JAIL BHAJIYA HOUSE BUILDING (B+G+2) NEAR R.T.O. CIRCLE AT SABARMATI AHMEDABAD (INCLUDING ELECTRIFICATION) (First attempt)

Description QUANTITY Unit RATE IN FIGURE RATE IN WORDS Amount

PROVIDING FOOD PICK-UP COUNTER WITH 2 UNDERSHELVES AND OVERHEAD SHELF OF SS 304 GRADE WITH - Overall Dimension 1.00 NO 39100.00 Rs. Thirty Nine Thousand

60"x24"x34" +60"x12"x4"sides covered food pickup counter with double bottom shelf and Overhead shelf for full length, 12" width and 4 " border on 3 One Hundred Only

sides (except kitchen side) fixed on the table at 60" ht from the floor level. Fabricated as per the details provided in the reference drawing and as

instructed by the consultant; comprising of Table Top made of 16 Swg, 304 quality, 18/8 Grade Stainless Steel duly 120 Grit matt polished with all

resulting edges rounded with no bur or other excess material left. Top will be turned down 50mm and 12 mm underneath in channel shape on all

exposed sides. The undersides of table tops will be mounted on 30mm x 30mm x 16 Swg S.S. Square pipes with cross supports for the depth, duly

secured by welding. the undersides will be suitably sound deadened by treating with a coat of aluminium carboxide rubberised paint, finished with silver

1 paint. 2 Nos Under shelves will be constructed of 304 quality 18/8 grade, 18 Swg. Stainless Steel Sheeting uniformly matt finished with 120 Grit and

reinforced with 30mm x 30mm x 16 Swg. S.S. square pipe Frame. Shelves will be turned down 38 mm and 12 mm underneath on all sides with resulting

corners cut-out to fit contour of leg. Legs constructed of 30 mm Stainless Steel Square tubes, with legs fitted with Ferro Nylon bullet legs adjustable to

mm height. Work table would have 6" ground clearance space. With Table mounted overhead shelf of 60"x12" with 4"ht border on all 3 sides (except

for kitchen side), made of 304 quality 18/8 grade, 18 Swg. S.S. sheeting fixed on the table, with square pipe support on all sides flushed to the waiter

side. The rate shall be inclusive of all necessary loading, unloading, transportations, all state & central taxes as applicable, protecting the instruments till

handing over, testing & commissioning etc. complete.

PROVIDING PANTRY WORK TABLE WITH 2 UNDER SHELVES AND 2 WALL MOUNTED OH SHELVES OF SS 304 GRADE WITH - overall 1.00 NO 54050.00 Rs. Fifty Four Thousand

dimension 84"x24"x34"+6"+108"x14"+108"x12" Work table with 2 Under shelves, 6" backsplash towards the wall side, 108"x14" wall mounted Oh shelf Fifty Only

to be fixed at 48" from FFL and 108"x12" wall mounted Oh shelf to be fixed at 66" from FFL. As per the details provided in the reference drawing and as

instructed by the consultant; comprising of Table Top made of 16 Swg, 304 quality, 18/8 Grade Stainless Steel duly 120 Grit matt polished with all

resulting edges rounded with no bur or other excess material left. Top will be turned down 50mm and 12 mm underneath in channel shape on all

exposed sides. The undersides of table tops will be mounted on 30mm x 30mm x 16 Swg S.S. Square pipes with cross supports for the depth, duly

secured by welding. the undersides will be suitably sound deadened by treating with a coat of aluminium carboxide rubberised paint, finished with silver

paint. The table top with the table placed against the building wall, will be turned up at back approximately 130 mm returned 20mm at 45 degree to all

2 with all exposed ends closed, argon are welded and smooth polished. 2 Nos Under shelves will be constructed of 304 quality 18/8 grade, 18 Swg.

Stainless Steel Sheeting uniformly matt finished with 120 Grit and reinforced with 30mm x 30mm x 16 Swg. S.S. square pipe Frame. Shelves will be

turned down 38 mm and 12 mm underneath on all sides with resulting corners cut-out to fit contour of leg. Legs constructed of 30 mm Stainless Steel

Square tubes, with legs fitted with Ferro Nylon bullet legs adjustable to 30 mm height. Work table would have 6" ground clearance space. With 2 Nos

wall mounted overhead shelf of 108"x14" and 108"x12", made of 304 quality 18/8 grade, 18 Swg. S.S. sheeting with 25mm and 12mm double beading

on all 3 sides and double beading downwards at front duly secured with 16 Swg Stainless steel wall brackets. The brackets are fixed by anchor fastener

on wall. The rate shall be inclusive of all necessary loading, unloading, transportations, all state & central taxes as applicable, protecting the instruments

till handing over, testing & commissioning etc. complete.

PROVIDING ISLAND WORK TABLE WITH 2 UNDERSHELVES OF SS 304 GRADE WITH overall dimension 96"x30"x34". Work table with 2 under 1.00 NO 54050.00 Rs. Fifty Four Thousand

shelves, 4 pair of legs, undershelves with proper supports. As per the details provided in the reference drawing and as instructed by the consultant; Fifty Only

comprising of Table Top made of 16 Swg, 304 quality, 18/8 Grade Stainless Steel duly 120 Grit matt polished with all resulting edges rounded with no

bur or other excess material left. Top will be turned down 50mm and 12 mm underneath in channel shape on all exposed sides. The undersides of table

tops will be mounted on 30mm x 30mm x 16 Swg S.S. Square pipes with cross supports for the depth, duly secured by welding. the undersides will be

suitably sound deadened by treating with a coat of aluminium carboxide rubberised paint, finished with silver paint. 2 Nos. Under shelves will be

constructed of 304 quality 18/8 grade, 18 Swg. Stainless Steel Sheeting uniformly matt finished with 120 Grit and reinforced with 30mm x 30mm x

Swg. S.S. square pipe Frame. Shelves will be turned down 38 mm and 12 mm underneath on all sides with resulting corners cut-out to fit contour of leg.

Legs constructed of 30 mm Stainless Steel Square tubes, with legs fitted with Ferro Nylon bullet legs adjustable to 30 mm height. Work table would

have 6" ground clearance space. The rate shall be inclusive of all necessary loading, unloading, transportations, all state & central taxes as applicable,

protecting the instruments till handing over, testing & commissioning etc. complete.

Description QUANTITY Unit RATE IN FIGURE RATE IN WORDS Amount

PROVIDING 3 BURNER COOKING RANGE OF SS 304 GRADE WITH overall dimension 72"x24"x34+6"burners high pressure cooking range, 2.00 NO 50600.00 Rs. Fifty Thousand Six

individual pilot lamp, individual spill tray, single bottom shelf, 6" splash back, heavy duty vessel rest for each burner. 4" set off space between the wall Hundred Only

and the leg frame. As per the details provided in the reference drawing and as instructed by the consultant; comprising of Top made of 16 Swg,

quality, 18/8 Grade Stainless Steel duly 120 Grit matt polished with all resulting edges rounded with no bur or other excess material left. Top will be

turned down 50mm and 12 mm underneath in channel shape on all exposed sides. The top with the table placed against the wall, will be turned up at

back approximately 130 mm returned 20mm at 45 degree to all with all exposed ends closed, argon are welded and smooth polished. 1 No. under

shelve will be constructed of 304 quality 18/8 grade, 18 Swg. Stainless Steel Sheeting uniformly matt finished with 120 Grit and reinforced with 30mm x

4 30mm x 16 Swg. S.S. square pipe Frame. Shelves will be turned down 38 mm and 12 mm underneath on all sides with resulting corners cut-out to fit

contour of leg. Individual drip tray made of 20 Swg and 18 Swg S.S. handed. The vessel rests of overall dimension 350mm x 350mm, oil painted black

mat finish colour. The gas burners would be duly connected with best quality copper pig tails. needle control valves and burners will be of heavy duty

industrial type and to be operated at 4.5 PSIG gas pressure. The main line will be of 25mm dia BSP 'C' class ERW M.S. pipe and pressure tested. Legs

constructed of 30 mm Stainless Steel Square tubes, with legs fitted with Ferro Nylon bullet legs adjustable to 30 mm height. Item would have 6" ground

clearance space. Require 4" space between the wall and the leg frame. The rate shall be inclusive of all necessary loading, unloading, transportations,

all state & central taxes as applicable, protecting the instruments till handing over, testing & commissioning etc. complete.

PROVIDING CHAPATHY GRIDDLE WITH PUFFER with overall dimension 36"x24"x34+6" griddle and 12" puffer, 'V' burners for the griddle and puffer 1.00 NO 31050.00 Rs. Thirty One Thousand

as per standard design, pilot lamp, single under shelf and 6" splash back to the wall side. 4" set off space between the wall and the leg frame. As per Fifty Only

the details provided in the reference drawing and as instructed by the consultant; with 30mm x 30mm x 16 Swg. S.S. square pipe Frame; comprising of

(a) 24"x24" CHAPPATHY GRIDDLE with sunken top, Chapathy Griddle plate of 600mm x 600mm x 5/8" thick machine polished mild steel plate, 2 Nos

'V' 600 burners and pilot burner with individual needle control valve on front panel, ignition window on front panel, Front / Side / Rear of 18 Swg Stainless

Steel. (b) 12"x24" CHAPPATHY PUFFER with sunken top, Chapathy puffer of perforated M.S. sheet or Jali plate, 1 No. 'V' 600 burners and pilot burner

with individual needle control valve on front panel, ignition window on front panel, Front / Side / Rear of 18 Swg Stainless Steel. The top with the table

placed against the wall, will be turned up at back approximately 130 mm returned 20mm at 45 degree to all with all exposed ends closed, argon are

5 welded and smooth polished. 1 No. under shelve for the full length of the equipment will be constructed of 304 quality 18/8 grade, 18 Swg. Stainless

Steel Sheeting uniformly matt finished with 120 Grit and reinforced with 30mm x 30mm x 16 Swg. S.S. square pipe Frame. Shelves will be turned down

38 mm and 12 mm underneath on all sides with resulting corners cut-out to fit contour of leg. Legs constructed of 30 mm Stainless Steel Square tubes,

with legs fitted with Ferro Nylon bullet legs adjustable to 30 mm height. Units more than 1800 mm in length will have 3 pairs of legs. Item would have 6"

ground clearance space. Require 4" space between the wall and the leg frame. Item Nos 3 and 6 would have the Chapathy Griddle on the right side and

the Puffer on the left side. The rate shall be inclusive of all necessary loading, unloading, transportations, all state & central taxes as applicable,

protecting the instruments till handing over, testing & commissioning etc. complete.

PROVIDING WORK TABLE with overall dimension 72"x24"x34"+6" +72"x12". Work table with double under shelves, 6" backsplash and wall mounted 1.00 NO 48300.00 Rs. Forty Eight Thousand

OH shelf. As per the details provided in the reference drawing and as instructed by the consultant; comprising of Table Top made of 16 Swg, 304 Three Hundred Only

quality, 18/8 Grade Stainless Steel duly 120 Grit matt polished with all resulting edges rounded with no bur or other excess material left. Top will be

turned down 50mm and 12 mm underneath in channel shape on all exposed sides. The undersides of table tops will be mounted on 30mm x 30mm x

Swg S.S. Square pipes with cross supports for the depth, duly secured by welding. the undersides will be suitably sound deadened by treating with a

coat of aluminium carboxide rubberised paint, finished with silver paint. The table top with the table placed against the building wall, will be turned up at

back approximately 130 mm returned 20mm at 45 degree to all with all exposed ends closed, argon are welded and smooth polished. 2 Nos Under

shelves will be constructed of 304 quality 18/8 grade, 18 Swg. Stainless Steel Sheeting uniformly matt finished with 120 Grit and reinforced with 30mm x

6 30mm x 16 Swg. S.S. square pipe Frame. Shelves will be turned down 38 mm and 12 mm underneath on all sides with resulting corners cut-out to fit

contour of leg. Legs constructed of 30 mm Stainless Steel Square tubes, with legs fitted with Ferro Nylon bullet legs adjustable to 30 mm height. Work

table would have 6" ground clearance space. With 2 Nos wall mounted overhead shelf of 108"x14" and 108"x12", made of 304 quality 18/8 grade,

Swg. S.S. sheeting with 25mm and 12mm double beading on all 3 sides and double beading downwards at front duly secured with 16 Swg Stainless

steel wall brackets. The brackets are fixed by anchor fastener on wall. The rate shall be inclusive of all necessary loading, unloading, transportations, all

state & central taxes as applicable, protecting the instruments till handing over, testing & commissioning etc. complete.

PROVIDING DOUGH KNEEDING MACHINE - SPIRAL MIXERS OF 20 Litres Capacity. Brand Option: Celfrost Spiral Mixer - Model No. HS 20 Single 1.00 NO 89700.00 Rs. Eighty Nine Thousand

Speed. The rate shall be inclusive of all necessary loading, unloading, transportations, all state & central taxes as applicable, protecting the instruments Seven Hundred Only

7 till handing over, testing & commissioning etc. complete.

PROVIDING POT RACK with overall dimension 42x18x84. Sides and uprights are made of 30 mm dia stainless steel pipes. Shelves are made of 25 mm 1.00 NO 38525.00 Rs. Thirty Eight Thousand

dia Stainless Steel pipes at 100 mm centre to centre widthwise. 6" Ground clearence and the remaining 78" equally divided for 4 shelves including the Five Hundred Twenty Five

8 top shelf. Legs fitted with Ferro Nylon bullet legs adjustable to 30 mm height. The rate shall be inclusive of all necessary loading, unloading, Only

transportations, all state & central taxes as applicable, protecting the instruments till handing over, testing & commissioning etc. complete.

Description QUANTITY Unit RATE IN FIGURE RATE IN WORDS Amount

PROVIDING PULVERIZER - FLOOR MODEL , as per the details provided in the reference drawing and as instructed by the consultant; comprising of 1.00 NO 20240.00 Rs. Twenty Thousand

floor model Pulveriser machine, full SS body, fixed on sturdy SS stand, 3 HP 3 ph motor, blades for all functions, wooden material pusher, standard Two Hundred Forty Only

9 design as per manufacturers specifications. The rate shall be inclusive of all necessary loading, unloading, transportations, all state & central taxes as

applicable, protecting the instruments till handing over, testing & commissioning etc. complete.

PROVIDING TILTING WET GRINDER - 10 litres with overall dimension of (approx.) 20"x20"x42", as per the details provided in the reference drawing 1.00 NO 67275.00 Rs. Sixty Seven Thousand

and as instructed by the consultant; comprising of floor model Tilting wet grinder machine, 10 litres capacity, stand of stainless tube heavy duty square Two Hundred Seventy

pipe, Stainless Steel grinding vessel, heavy duty Coimbatore stone wheel, 3.5 HP 3 ph motor, tilting by manual tilting through tilting rod. Brand Options Five Only

10 are 1. Trident Engineers (Rishab), Coimbatore / 2. Sri Vinayaga Industries, Coimbatore / 3. Lakshmi Engineering Products, Coimbatore. The rate shall

be inclusive of all necessary loading, unloading, transportations, all state & central taxes as applicable, protecting the instruments till handing over,

testing & commissioning etc. complete.

PROVIDING 4 DOOR VERTICAL REACH-IN REFRIGERATOR with overall dimension of 54"x32"x84", as per the details provided in the reference 1.00 NO 161000.00 Rs. One Lakh Sixty One

drawing and as instructed by the consultant; comprising of 4 door reach-in refrigerator unit of 1400 litres, 2x 1/1 GN pan compatibility, outside and inside thousand only

body made of full S.S. 304 quality 20/22 Swg Stainless Steel, Pan resting made of 10mm x 15mm x 10mm 16 Swg stainless steel channel pairs with

15mm top edge out to ret the pans before sliding, temperature indicator of special non-clogging electronic indicator with built in power supply,

temperature range from 1°C to 4°C, spring loaded self closing doors with magnetic gasket, PUF insulation body, refrigeration system with Hermetically

sealed Kirloskar Copeland Compressor with ventilated cooling system, compressor located on top with grill panel, 2 Nos S.S. rack of stainless steel rods

11 provided in each compartment, racks made of sides and 2 cross supports of 6mm and shelf of 4mm stainless steel rods, legs of 150mm long 38mm dia

stainless steel pipes and adjustable nylon bullet feet, indicator panel with ON/OFF switch temperature indicator and temperature setting system.

External locking facility to be provided. Brand options are 1. Celfrost Model No. 1410 TNM / 2. Elanpro Model No. EGN 14.1C4 / 3. Coldway 1400 litres.

The rate shall be inclusive of all necessary loading, unloading, transportations, all state & central taxes as applicable, protecting the instruments till

handing over, testing & commissioning etc. complete.

PROVIDING SLOTTED ANGLE STORAGE RACK with overall dimensions 36"x18"x84". As per the details provided in the reference drawing and as 1.00 NO 9775.00 Rs. Nine Thousand Seven

instructed by the consultant; comprising of M.S. slotted angles of 40mm x40mm of 14 gauge thickness with 84" ht, 5 Nos M.S. shelves of 16 gauge Hundred Seventy Five

12 thickness with stiffeners below and powder coated, corner plates of 75mm x 75mm and nut bolts of rust proof GI, legs to have PVC shoes "L" type. Unit Only

to be painted in DA Grey Enamel Paint. The rate shall be inclusive of all necessary loading, unloading, transportations, all state & central taxes as

applicable, protecting the instruments till handing over, testing & commissioning etc. complete.

PROVIDING DISH LANDING TABLE with overall dimension 72"x24"x34"+ 6" +72"x14". Dish landing table with 1" raised border on all sides. 9" dia 1.00 NO 37950.00 Rs. Thirty Seven

Garbage chute on the left side, with 24" provision to place Garbage Bin and the remaining space on the left would have 2 under shelves. As per the Thousand Nine Hundred

details provided in the reference drawing and as instructed by the consultant; comprising of Table Top made of 16 Swg, 304 quality, 18/8 Grade Fifty Only

Stainless Steel duly 120 Grit matt polished with all resulting edges rounded with no bur or other excess material left. Top will be turned down 50mm and

12 mm underneath in channel shape on all exposed sides. The undersides of table tops will be mounted on 30mm x 30mm x 16 Swg S.S. Square pipes

with cross supports for the depth, duly secured by welding. the undersides will be suitably sound deadened by treating with a coat of aluminium

carboxide rubberised paint, finished with silver paint. The table top with the table placed against the building wall, will be turned up at back

13 approximately 130 mm returned 20mm at 45 degree to all with all exposed ends closed, argon are welded and smooth polished. 2 Nos. Under shelves

will be constructed of 304 quality 18/8 grade, 18 Swg. Stainless Steel Sheeting uniformly matt finished with 120 Grit and reinforced with 30mm x 30mm x

16 Swg. S.S. square pipe Frame. Shelves will be turned down 38 mm and 12 mm underneath on all sides with resulting corners cut-out to fit contour of

leg. Legs constructed of 30 mm Stainless Steel Square tubes, with legs fitted with Ferro Nylon bullet legs adjustable to 30 mm height. Work table would

have 6" ground clearance space. The rate shall be inclusive of all necessary loading, unloading, transportations, all state & central taxes as applicable,

protecting the instruments till handing over, testing & commissioning etc. complete.

PROVIDING FOOD SERVICE BAINMARIE COUNTER (6 1/1 GN PAN) WITH SNEEZE GUARD with overall dimension 120"x24"x30" +120x14". Food 1.00 NO 96600.00 Rs. Ninety Six Thousand

service Bain-marie counter with all 3 sides covered, 6 Nos 1/1 GN pan, Bain-marie with electric heating system with thermostat and ON/OFF switch, Six Hundred Only

water drain outlet, with sneeze guard for the full length made of glass or clear acylic. 6 Nos 1/1 GN pans arranged continuously towards the right side

and the remaining space on the left side would be provided as table top. As per the details provided in the reference drawing and as instructed by the

consultant; comprising of Top with cut-out to hold 6 Nos 1/1 size GN pans of 150mm deep with S.S. lids and handle, edges of cut-outs raise 12mm to

form integral part on which pans will rest, 3 sides covered with 18 Swg Stainless Steel sheet waiter side open, high quality asbestos insulation for Bain-

Marie, 6 Nos 1/1 GN pan of 150mm deep Food Pans with S.S. lids, Bain-Marie water chamber to accommodate 6 Nos GN pans with 25mm BSP Lever

14 operated drain valve, bain-marie to have 3 KW 3 ph electric heater placed in the well to have water always and to avoid dry run, 30mm x 30mm

stainless steel square pipe frame work, 1No Under shelves will be constructed of 304 quality 18/8 grade, 18 Swg. Stainless Steel Sheeting uniformly

matt finished with 120 Grit and reinforced with 30mm x 30mm x 16 Swg. S.S. square pipe Frame. Shelves will be turned down 38 mm and 12 mm

underneath on all sides with resulting corners cut-out to fit contour of leg. Legs constructed of 30 mm Stainless Steel Square tubes, with legs fitted with

Ferro Nylon bullet legs adjustable to 30 mm height. Counter would have 6" ground clearance space. Bain-marie counter would have Sneeze-guard of

curved glass fitted on to the counter. The rate shall be inclusive of all necessary loading, unloading, transportations, all state & central taxes as

applicable, protecting the instruments till handing over, testing & commissioning etc. complete.

Description QUANTITY Unit RATE IN FIGURE RATE IN WORDS Amount

PROVIDING KITCHEN EXHAUST SYSTEM WITH HOODS, DUCTING, CENTRIFUGAL BLOWER UNIT, ETC. As per the details provided in the 1.00 NO 78200.00 Rs. Seventy Eight

reference drawing and as instructed by the consultant; comprising of a Triangle Hood with overall dimension 138"x18"x24" to be fixed on the wall at an Thousand Two Hundred

appropriate height above the cooking range. The oil filters made of frame of 18 Swg stainless steel 18 Swg Stainless Steel baffle Filters. The hoods and Only

15 the ducting made of 22 Swg Stainless Steel sheets connected to the Centrifugal Blower Unit with 5.0 HP 3 ph Crompton Make Electric Motor. Duct size

would be 24" x 24" of approximate length of 30'. Motor starter, panel board, wires and other accessories are included. The rate shall be inclusive of all

necessary loading, unloading, transportations, all state & central taxes as applicable, protecting the instruments till handing over, testing &

commissioning etc. complete.(SS 304 grade)

PROVIDING CHAFFING DISHES - RECTANGLE 1/1 GN- LARGE - INDUCTION TYPE - Full S.S. 1/1 GN Pan, with Food Container, Lid, Water 12.00 NO 10925.00 Rs. Ten Thousand Nine

Container, Fuel container for heating, on Good design stand/legs. Brand Options: Awkenox / Venus / F & S. The rate shall be inclusive of all necessary Hundred Twenty Five Only

16 loading, unloading, transportations, all state & central taxes as applicable, protecting the instruments till handing over, testing & commissioning etc.

Providing, supplying and installing custom-designed granite dining table of overall size 1800 × 750 × 750 mm (L × W × H), comprising a supporting 10.00 NO 28175.00 Rs. Twenty Eight

frame fabricated from 50 × 50 × 2 mm (2" × 2") stainless steel hollow sections(SS 304 grade), complete with all necessary structural supports, bracing, Thousand One Hundred

welding/joinery, grinding, finishing and fixing accessories. The tabletop shall comprise 19/20 mm thick Golden Galaxy Black Granite of size 1800 × 750 Seventy Five Only

17 mm, with properly bevelled and polished exposed edges,securely fixed over the supporting frame using suitable approved fixing/adhesive systems. The

table shall be provided with high-density plastic buffers at all four legs to protect the finished floor surface and ensure stable positioning. All materials,

dimensions, profiles, finishes and workmanship shall be strictly as per the Architect’s approved drawings, specifications and samples.rate is inclusive

with all necessary material,labour etc.complete as per direction of engineer incharge.

Providing, supplying and installing custom-designed outdoor wooden teak wood seating bench of overall size 1800×450×450mm (L × W × H), fabricated 20.00 NO 21400.35 Rs. Twenty One Thousand

using good-quality curved teak wood as per drawing for the structural/supporting members and seating,with matt melamine polish including curved Four Hundred & Paise

18 wooden elements as per the Architect’s approved drawings, details and specifications.rate is inclusive with all necessary material,labour etc.complete as Thirty Five Only

per direction of engineer incharge.rate is inclusive with all necessary material,labour etc.complete as per direction of engineer incharge.

Providing, supplying and installing the library cabinet of size 1530 x 360 x 1980mm complete with all necessary components, accessories, hardware, 4.00 NO 81075.00 Rs. Eighty One Thousand

19 fittings, fasteners, supports, finishes and other associated items as per the Architect/ specification. Seventy Five Only

Providing, supplying and installing custom-designed furniture showcase of size 1800 × 450 × 2250 mm, fabricated using good-quality 18mm waterproof 2.00 NO 34500.00 Rs. Thirty Four Thousand

plywood with approved natural veneer with melamine matt finish polish, complete with lower storage up to approximately 600 mm height, glazed display Five Hundred Only

portion with glass shelves/panels and open sides wherever indicated, strictly as per the Architect’s approved drawings, details and specifications. All

20 materials, veneer, 10mm toughhened clear glass, hardware and finishes shall be as per the Architect’s approved drawings, specifications and samples.

The completed showcase shall be properly aligned, securely fixed and finished to the required standard of workmanship,Lighting: Internal electrical

provision included; lighting fixtures excluded.rate is inclusive with all necessary material,labour etc.complete as per direction of engineer incharge.

Providing, supplying and installing custom-designed low-height furniture showcase/pedestal of size 1800×450×750 mm, fabricated using good-quality 4.00 NO 43125.00 Rs. Forty Three Thousand

18mm waterproof plywood with approved natural veneer with melamine matt finish polish, complete with storage/display arrangement and 10mm One Hundred Twenty Five

toughened clear glass panels/shelves wherever indicated, strictly as per the Architect’s approved drawings, details and specifications. All materials, Only

21 veneer, glass, hardware and finishes shall be as per the Architect’s approved drawings, specifications and samples. The completed pedestal shall be

properly aligned, securely fixed and finished to the required standard of workmanship,,Lighting: Internal electrical provision included; lighting fixtures

Providing,supplying and installing of reception(outer) with Overall size of reception table size shall be 1800 x 750 x740mm (WDH) with side unit size of 1.00 NO 29624.00 Rs. Twenty Nine

900 x 450 x 750mm(LDH).The worktop shall be made up of 25mm thick PLPB E1 norms duly finished with 2mm pvc edge band. The Modesty shall be Thousand Six Hundred

made of 18mm thick pre laminated partical boards with E1 norms and all visible side 2mm pvc edge bending. Modesty height shall be 450mm. The Twenty Four Only

understructure shall be made of 18mm thick prelam partical board with 2mm pvc edge band all the visible side. Wire Management: 65mm Dia grommet

22 shall be provided for easy wire access. Side storage of size 900 x 450 x 750mm to be provided made up of 18mm thick PLPB E1 norms openable

shutter storage. back panel made up of 9mm thickn PLPB E1 norms. Finger groove shall be created by providing a reverse tapered profile edge of 6mm

straight surface & 12 mm tapered towards inside at 45 degree & then sealed with minimum 2mm thick PVC lipping on automatic machine. Suitable lock

shall be provided.rate is inclusive with all necessary material,labour etc.complete as per direction of engineer incharge.

Description QUANTITY Unit RATE IN FIGURE RATE IN WORDS Amount

Providing,supplying and installing of reception(inner) Overall size of reception table size shall be 1500 x 750 x740mm (WDH) with side unit size of 900 x 1.00 NO 28123.25 Rs. Twenty Eight

450 x 750mm(LDH).The worktop shall be made up of 25mm thick PLPB E1 norms duly finished with 2mm pvc edge band. The Modesty shall be made Thousand One Hundred

of 18mm thick pre laminated partical boards with E1 norms and all visible side 2mm pvc edge bending. Modesty height shall be 450mm. The Twenty Three & Paise

understructure shall be made of 18mm thick prelam partical board with 2mm pvc edge band all the visible side. Wire Management: 65mm Dia grommet Twenty Five Only

shall be provided for easy wire access. Side storage of size 900 x 450 x 750mmto be provided made up of 18mm thick PLPB E1 norms openable shutter

23 storage. back panel made up of 9mm thickn PLPB E1 norms. Finger groove shall be created by providing a reverse tapered profile edge of 6mm straight

surface & 12 mm tapered towards inside at 45 degree & then sealed with minimum 2mm thick PVC lipping on automatic machine. Suitable lock shall be

provided.rate is inclusive with all necessary material,labour etc.complete as per direction of engineer incharge.rate is inclusive with all necessary

material,labour etc.complete as per direction of engineer incharge.

Providing,supplying and installing of reception cabinets with overall size of reception cabinate shall be 1200 x 450 x 750mm (WDH) . Top shall be made 3.00 NO 12635.05 Rs. Twelve Thousand Six

up of 18mm thick pre laminated particle board E1 norms and Back shall be made up of 9 mm thick pre laminated particle board with 2mm PVC edge Hundred Thirty Five &

lipping, Shutters shall be made up of 18 mm thick pre laminated particle board. Shutters to be provied for compartment. The storage shall have Paise Five Only

adjustable shelf. Edge: All exposed shall be sealed with 2mm thick PVC edge lipping. The hinged doors top shall be provided with finger groove handle-

24 less design for a streamlined look. Finger gAroove shall be created by providing a reverse tapered profile edge of 6mm straight surface & 12 mm

tapered towards inside @ 45 degree & then sealed with minimum 2mm thick PVC lipping on automatic machine. Cam Lock faciltity should be provided

for safe storage of documents.rate is inclusive with all necessary material,labour etc.complete as per direction of engineer incharge.rate is inclusive with

all necessary material,labour etc.complete as per direction of engineer incharge.

Providing and supplying reception chair with overall size of Chair shall be height 870 to 970 +/-5 mm, Back Width 415 mm at Top and 470mm at bottom, 2.00 NO 9137.90 Rs. Nine Thousand One

and 450mm at the lumber support. Seat Width 480 +/-5 mm, Seat Depth 440+/-5 mm and Seat height 420mm to 520 mm +/-5mm range. over all chair Hundred Thirty Seven &

width should be 540 +/-5mm and Overall chair depth should be 610 +/-5mm. Seat should be made up of foam pre moulded at 55 kg/m3 density. Paise Ninety Only

hardness of 25+ 3kgf at 50% deflection conforming to IS 3400. Seat shall be upholstered with micro fabric 100% polyster 180 GSM abrasion >

cycles. No flamming or progressive smoldering within one hour of placement of the cigarettes. Fire rated fabric confirming to BS EN 1021 (match) should

be used. The back frame shall be made up of PPGF and the injection molded in black color, armrest also in black color. The chair shall be supplied with

25 Cushion Back rest. The Chair should be provided with center tilt two position lock Mechanism.The mecahinsm plate shall be attached to seat with

2.5mm thick plate. The mechanism shall allow 360 degree revolving feature along with height adjustablility. Fixed arms connected to seat and back in

the same colour.Armrest shall be Single peice die casted trapezium shaped arm rest overall size of 280 L x 230 H x 11mm thick at user side. The

mechansim shall possess seat to back recline ratio of 1:1. rate is inclusive with all necessary material,labour etc.complete as per direction of engineer

MODEL : ALPHA MBG FXD ARMS - PP BlackCushion Seat & Back

(i)The Gas Lift used shall be class 4 tested as per ANSI BIFMA standards. Nylon Base to be provied.Twin castors 50 mm dia with PA6 material

complying to ANSI/ BIFMA X 5.1 2017 standards. the axle pin shall be rust protected zinc passivated. The base shall be made up of nylon glass filled

black color.Tolerance of +/- 5mm to be considered for product sizes i.e Length, Depth & height and tolerance of 5% to be considered in pipe thickness &

Providing supplying 3 Seater waiting chair overall size of 3 seater waiting chair shall be 1810L x 630D x 860H. Each individual seat shall be about 33- 2.00 NO 20113.50 Rs. Twenty Thousand One

35mm thick on borders & 520mm wide. Normal gap in-between two seats is 65-70mm. Seat height & Arm rest height from floor is about 430mm & Hundred Thirteen & Paise

625mm respectively. Seat and Backrest together a One piece / single unit from Polyurethane Integral Foam, with a density of 350-400kg/m³ with a shore Fifty Only

hardness of 65-75HA, a strong & robust seat that comes with inbuilt structure formed by steel frame. Both the Leg & Arm Rests shall be made of high

pressure Aluminium die casted material of ADC-12 grade conforming to ASTM E 1251- 2011, IS 7658-1990 & IS 11035 – 1190. For chemical

composition and IS 1608 – 2005 for UTS & Ys. Legs shall be fitted with height adjustable anti-skid glides or levelers that shall injection moulded in

Nylon, an engineering plastic material, comes in black color. Height can be adjusted upto 25mm based on floor undulations. The support Beam is a load

bearing element & hence designed in a unique Triangular shape. It shall have an Aluminium extrusion profile with 2-3mm thick walls offering a strong

structural support. The size of the beam shall be 110 x 110 x 171mm. Seats shall directly fixed onto the BEAM. rate is inclusive with all necessary

material,labour etc.complete as per direction of engineer incharge.

MODEL : PU TANDEM 3 Seater with End Arms

(i) The Aluminum extrusion, die cast parts & metal parts shall come with powder coated finish, with uniform powder coating thickness of 50–60-micron

thickness. Product shall comes in knock down packing. The design takes care of easy & quick installation. All hardware are of high grade steel and shall

be zinc blue passivated.

Description QUANTITY Unit RATE IN FIGURE RATE IN WORDS Amount

Providing, supplying and fixing 12mm clear toughened safety glass partitions and glass door of required sizes and configurations, as per the Architect’s 2.00 SQM 6023.26 Rs. Six Thousand Twenty

approved drawings, details and design, including fixed glass panels, glass door shutters, floor springs, patch fittings, handles, channels, profiles, Three & Paise Twenty Six

brackets, fasteners, sealants and all necessary accessories and fittings, complete in all respects. The glass shall comprise 12mm thick clear toughened Only

27 safety glass, manufactured and processed in accordance with relevant Indian Standards. All exposed glass edges shall be properly machine-

polished/arrissed and shall be free from sharp edges, chips, cracks or other visible defects.rate is inclusive with all necessary material,labour

etc.complete as per direction of engineer incharge.All hardware should be only Hettich/Hafele.

Providing, supplying and installing custom-designed dining table of overall size 1200 × 800 × 750 mm (L × W × H), comprising a central support frame 21.00 NO 21258.90 Rs. Twenty One Thousand

and legs fabricated in MS steel, finished with approved black matt powder coating, complete with PVC buffers and all necessary supports and fixing Two Hundred Fifty Eight

accessories. The tabletop shall comprise a waterproof plywood base with teak wood battens/accents as per the Architect’s approved drawings and & Paise Ninety Only

28 details, finished with Asian Paints Matt Melamine Polish. The tabletop shall be overlaid with 10 mm thick toughened clear glass, with all exposed edges

machine-finished with pencil-round edges..rate is inclusive with all necessary material,labour etc.complete as per direction of engineer incharge.

Providing Basil dining chair with the overall size of the chair shall be 640WX540DX800H. Seat shall be upholstered over 12 mm thick curved ply with 84.00 NO 13986.30 Rs. Thirteen Thousand

40/32 density pu foam, High quality fabric shall be used in seat upholstery. Seat size shall be Front side width 490mm , back side width 420mm, 450mm Nine Hundred Eighty Six

depth with 35MM of Thickness. solidwood back shall be provided with polish. The size of the back shall be of total height from handle 110mm, the & Paise Thirty Only

thickness at bottom 30mm and at the top shall be 20mm. Back shall be connected with the handle with help of mortise and tenon joint. handle shall be

made up of solidwood with size at front side 60mm at middle 80mm and at back side width shall be 30mm with 40mm of thickness. Understructure: Solid

wood Polished understructure shall be provided with the size of front width at bottom 580mm ,back side width at bottom 490mm and the side length at

bottom shall be 480mm & Upper front width of the structure shall be 560mm , upper back width 490mm and upper side length shall be 365mm. All the

round tapperd leg size shall be bottom & top Ø30mm and at the middle of the leg Ø40mm. supporting beam size shall be 60x27mm shall be probided.

All the Legs and the supporting members shall be joints with help of mortise and tenon joint. Complete under structure shall have comes with polish. pvc

leg bush shall be provided at the bottom.rate is inclusive with all necessary material,labour etc.complete as per direction of engineer incharge. MODEL :

Providing, supplying and fixing a custom-designed wood panel with 10mm toughened clear glass partition above existing/proposed granite counter, as 1.00 SQM 6743.83 Rs. Six Thousand Seven

per the Architect’s approved drawings, dimensions, details and design, including all necessary supporting framework, plywood backing, 3" × 2" Teak Hundred Forty Three &

Wood border patties, approved veneer finish with melamine matt finish polish,10 mm Toughened Clear Glass, toughened glass panels, profiles, Paise Eighty Three Only

channels, brackets, clamps, sealants, fasteners and all associated hardware and fittings, complete in all respects.rate is inclusive with all necessary

material,labour etc.complete as per direction of engineer incharge.

31 Providing and erecting water cooler having storage capacity 150 Ltr. & cooling capacity 150 Ltr.per hour @ an ambient temp of 45˚ C. The outlet temp. 3.00 Each 60874.00 RS: Sixty Thousand

of the water should drop by 15˚C within a hour, The water cooler should be comprising of hermetically sealed compressor Reciprocating compressor Eight Hundred Seventy

with R134A gas , fan motor, Copper Condensing unit, fan motor, water tank surrounded by evaporating, coil, thermostats, relay etc.complete with Four only

necessary inlet & outlet connection. The body of water cooler will be made from Stainless Steel, CP brass push cock, inlet float valve, with all plumbing

and electrical accessories, inlet, outlet, overflow and PVC drain out connection to FD complete as required With 20 Amp. 3 pin plug Top with indicator.

(This item including comprehensive service & maintanance including Spare Parts & consumable item during warranty period of one year. Maintanance

& service must be carried out by OEM dealer/distributer who has executed the work. Service & Maintance must be as per OEM guid line.) (Agency has

to give AMC to water cooler OEM / authorized dealer upto defect liability period] [Voltas, Bluestar, Usha model approved by EIC as per specification]

Description QUANTITY Unit RATE IN FIGURE RATE IN WORDS Amount

32 Supplying & erecting reverse osmosis (RO) water purification system with M.S. powder coated pedestal frame, prefilter housing carbon filter suitable 3.00 Each 77120.00 RS: Seventy Seven

buster DC pump, auto low & high pressure switches with following size of LPH capacity & erected as directed For 100 LPH with 1 phase / 3 phase Raw Thousand One Hundred

water pump of 500LPH @ 2.5kg/cm2 - (1N0 - Kirloskar /CRI/Lubi), Dual media filter 10"x54" - (1 No), Micron cartridge filter 20" x 2.5" ( 1No), High Twenty only

pressure pump 500LPH @ 10kg/cm2 - (1No - Shimge /CRI /Lubi), RO Membrane housing with RO membrane of 40*40 - (1No), RO pressure tube 4" x

1E - ( 1No), 0 - 1200LPH Rotameter -(2 Nos), with Recovery Rate 50%.

33 The purpose of RO plant is cater the portable and drinking water 24X7 to beneficiary.So we have taken comprehensive maintenance contract item in 3.00 Each 69408.00 RS: Sixty Nine

this tender. Agency has to give All in All maintenance contract to OEM of RO plant and submit AMC copy to GSPHCL at the time of final bill.Agency has Thousand Four Hundred

to submit FDR of Rs 2,08,224.00+ GST or quoted amount whichever is higher to GSPHCL. Which will be released after successful completion of AMC Eight only

& at the and of defect liability period. AMC consist of general service & Filter shall be replaced at every 3 months.Membranes & booster pump shall be

repaired/ replaced whenever required.Agency has to stick maintenance schedule on the RO plant and date of service, TDS of water, discharge of water

etc. shall be written on this.Agency has to receive certificate from beneficiary every year and submit at the time of releasing SD.For 100LPH RO plant

TOTAL CIVIL COST(A)

TOTAL ELECTRICAL COST(B)

TOTAL COST(A+B)

Signature of Contractor DY.Executive Engineer Executive Engineer

Ahmedabad. Ahmedabad.