Repair works of N.H. Inspection House and N.H. Store

Distemper one coat with oil bound distemper of approved brand manufacture and required shade on decorated wall surfaces to give an even shade over and after throughly brushing surface free from mortar dropping and other foreign matter and also including preparing the surface even also materials for every coat on previously old distempered surface.(ch 15 si no 651) (Excluding GST)

Providing and fixing CPVC Pipe 1" dia from water tank/Submirsible pump to bathroom including cost of all cutting of wall repairing including cost of all nipples bands, elbow etc complete for proper completion of the work. (Excluding GST)

supply and fixing CPVC Pipe 3/4" dia inside bathroom walls including cost of all cutting of wall repairing including cost of all nipples bands, elbow etc complete for proper completion of the work.(20mm dia) (Excluding GST)

Providing and fixing water closet squattling pan (indian type w.c. pan) with 100 mm sand cast iron p or S trap, 10 liter low level white p.v.c. flushing cistren with manually controlled device (handle lever)conforming to is:7231,with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with intgral type foot rests. ch 22 item no 17.1 (Excluding GST)

supply and fixing white vitreous china wash basin including making all connections but excluding the cost of fitting: Flat back wash basin of size 630x450mm. Ch 22 As Per DSR Item No. 17.25.1 Flat back wash basin of size 630x450mm (Excluding GST)

Providing and fixing P.V.C. waste pipe for sink and whas basin including p.v.c waste fittings complete (40mm Dia). As Per DSR Item No. 17.28.2.2 (Excluding GST) 40mm dia (Flexible pipe)

providing and placing on terrace (at all floor levels ) polyethylene water storage tank isi 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet , outlet and overflow pipes but without fittings and the base support for tank .500ltr ch 22 dsr no 18.48 (Excluding GST)

Providing and fixing ball valve of approved quality, high or low pressure with plastic floats complete. 20 mm nominal bore. As per DSR Item No. 18.18.2) (15 mm nominal bore) (Excluding GST)

Providing and fixing brass stop cock of approved quality : 20 mm Norminal bore. As per DSR Item No. 18.16.2) (15mm nominal bore) (Excluding GST)

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. As per D.S.R 18.51 (15mm nominal bore) (Excluding GST)

Providing and fixing C.P. brass bib cock of approved quality conforming to IS : 8931 : 15 mm nominal bore. As per D.S.R 18.49.1 (15mm nominal bore) (Excluding GST)

Providing and fixing C.P. Brass angle valve for basin mixer and geyser points of approved quality conforming to IS . 8931 (15mm nominal bore) (Excluding GST)

12 mm thick plaster with cement and approved course sand in proportion 1:3 over brick work minimum thickness not to be less than 1 cm including supply of all materials labour and T&P etc. required for proper completion of the work SI.NO. 583. (Excluding GST)

Supply and fixing 6mm thick china glazed tiles of grade-first quality in flooring or in skirting or dado laid with 1:3 cement and approved coarse sand mortar finished with white cement slurry jointing and polishing complete including supply of all materials labour and T&P etc. required for proper completion of the work. S.I. no. 628 (Excluding GST)

Supplying & laying one layer of tarfelt or any othe equivalent approved material over roofs as per direction of the Engineer-in-charge including necessary over lap giving a coat of approved mastic paint on the bottom and top of tarfelt, spreading of necessary quantity of approved coarse sand or small size bajri and including supply of all materials, labour and T&P etc. required for proper completion of the work. S.I. No. 545 (Excluding GST)

Providing and applying plaster of paris putty of 2mm thickness over plastered surface to prepare surface even and smooth complete. As per S.I. No. DSR 13.26 (Excluding GST)

Supply and fixing of flush Doors commercial quality conforming to 1.5. 2202 Part (1983) including fixing of woode cleats and stoppers and including fixing and adjustment of hinges bolts locks handles springs fitting with necessary screws to be supplied departmentally. 35 mm thick as per S.I. No. 470 (II) (Excluding GST)

Painting first coat over priming coat(but excluding cost of priming coat) on wood or steel and other metal surface with superior synthetic enamel standard make brushing to give an even shade and finish and including Neaning the surface of all dirt dust and other foreign matter sand papering and stripping including cost of all materials, labour, T&P etc required for the proper completion of the work. As per Ch. 15 S.I. No. 2 (Excluding GST)

Renewing glass panes, with putty and nails wherever necessary including racking out the old putty : Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm). As Per DSR Item 14.5.1 (Excluding GST)

Please Enable Macros to View BoQ information