Spl Repair/Replacement of ceiling light and sound sys incl misc items at RIMC Dehradun and minor wk and revenue works under GE Dehradun.

Amount

Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level), complete all as specified and directed.

Material and labour for Machine cut kota stone slab flooring 20-25mm thick over 20 mm thick cement mortar 1:6 screed base laid and jointed with grey cement slurry @3Kg/sqm mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified and directed.

Material and labour for Machine cut kota stone slab as in riser of steps, skirting, dado and pillar as in skirting 20-25 mm thick laid and jointed with grey cement slurry @3Kg/sqm mixed with pigment to match the shade of the slab including rubbing and mirror polishing over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed.

Surface excavation in any type soil not exceeding 30.00 cm deep and averaging 15cm deep and getting out complete all as specified and directed.

Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in any type of soil complete all as specified and directed.

Rough excavation not exceeding 1.5 m deep and getting out in hard and dense soil complete all as specified and directed.

Material and labour for plain cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundation and mass concrete complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in l;ayers not exc 25 cm in soft and loose soil complete all as specified and directed.

Removing excavated material not exceeding 50M and depositing where directed at a lavel not exceeding 1.5m above the starting point, soil complete all as specified and directed.

Removing excavated material exceeding 50M and n.exc 250 mtr depositing where directed at a lavel not exceeding 1.5m above the starting point, soil complete all as specified and directed.

Material and labour excavated earth for spreading and levelling in layers n exc.25 cm thick and well ramming including watering as required complete all as specified and directed. (Note : earth will be used brought from item No 05 & 06 above and from MoD land)

Material and labour cement concrete M-25 nominal mix (using 20mm graded stone aggregate) for foundations, includingf rafts, footings, foundations beams, plinth beams, bases for columns etc complete all as specified and directed.

Material and labour cement concrete M-25 nominal mix (using 20mm graded stone aggregate) for columns, pillars, piers, post and strut complete all as specified and directed.

Material and labour cement concrete M-25 nominal mix (using 20mm graded stone aggregate) for beams, cantilivers, beressummers, lintels over 1.5m span complete all as specified and directed.

Material and labour cement concrete M-25 Nominal mix (using 20mm graded stone aggregate) for slab, chajja complete all as specified and directed.

Material and labour for formwork to sides of concrete , foundations, footings, bases of columns, rafts and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work for rough finished surface complete all as specified and directed.

Material and labour for formwork to sides of pillars, posts, struts, piers, columns and stanchions etc.for fair finished surface complete all as specified and directed.

Material and labour for formwork to sides and soffits of floor or roof beams, beam haunching, girders, bressummers, lintels, cantiliver shelves etc.for fair finished complete all as specified and directed.

Material and labour formwork to chullah hoods, slab, chajjas, troughs and similar items including edges for fair finished surface complete all as specified and directed.

Material and labour for formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete raillings , opening in concrete walls, floors and roofs n exc 20cm wide and sides of RCC/PCC bands in walls, hozontal or sloping and similar work exc 10cm but n exc 20cm etc.for fair finished surface complete all as specified and directed.

Material and labour for brick work with bricks old size straight or curved on plan exc 6m radius built in cement motar CM 1:6 complete all as specified and directed

Material and labour for brick work with subclass ‘B’ bricks old size in cement mortar 1:4, straight or curved on plan to any radius in half brick thick walls complete all as specified and directed.

Material and labour for cement concrete type B0 (Using 12.5mm graded stone aggregated) 40mm thick in damp proof course to horizontal or vertical surfaces including necessary formwork complete all as specified and directed.

Material and labour for RCC Type B-1, 1:2:4 nominal mix (using 20 mm graded aggregate) in Beams, cantilevers, bressummers, lintels over 1.5m span, complete all as specified and directed.

Material and labour for providing precast cement concrete 1:2:4 nominal mix type B1 (using 20 mm graded aggregate) set in cement mortar 1:4 in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces complete all as specified and directed.

Material and labour for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, incl cranking, bending spirally for hooping for columns,footing, plinth beam, roof beam, lintels, slabs and other similar structures etc., hooking ends and binding with and incl mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Material and labour for mild steel TMT bars 8mm dia, cut to length, bent to shape required, incl cranking, bending spirally for hooping for columns,footing, plinth beam, roof beam, lintels, slabs and other similar structures etc., hooking ends and binding with and incl mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Description all as ser item No 26 above but 5mm dia and over upto and inclluding 10mm dia in stirrups, spacers and binders etc complete all as specified and directed.

Material and labour for 15mm thick rendering on other than fair faces of brick work in CM 1 : 6 finished even and smooth without using extra cement complete all as specified and directed.

Material and labour for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1 : 4 mixed with water proof compound finished even and smooth without using extra cement complete all as specified and directed. Note : Water proof compound shall be measured and paid separatelly.

Supply only liquid water proof compound complete all as specified and directed.

Material and labour for preparation of newly plastered surface of walls including corners and applying two coats of cement based paint over a coat of primer etc complete all as specified and directed.

Material and labour for preparing new plastered surfaces and applying three coats of white wash on walls complete all as specified and directed .

Material and labour for hardcore of gauge exc 63 mm but n.exc 100 mm deposited, spread and leveled in layers n.exc 15 cm thick, watered and rolled/rammed to a true surfaces in broken stone or boulder complete all as specified and directed.

Material and labour for hardcore of broken bricks of gauge n exc. 63 mm , deposited , spread and levelled and compacted in layers n exc. 15 cm thick , watered and rammed to a true surface complete all as specified and directed.

Material and labour for 75 mm thick cement concrete type D-2, 1:4:8 (40 mm graded stone aggregate) as in sub base complete all as specified and directed.

Material and labour for 25 mm thick cement concrete type B-0 1:2:4 (using 12.5 mm graded stone aggregate) as in floor finished complete all as specified and directed.

Material and labour for coloured joint free non-skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, on floor etc. set and jointed in neat cement slurry @3Kg/sqm and pointed in white or coloured cement to match over and including screed bed or bedding layer of mortar, 15 mm thick, in cement mortar 1:6, complete all as specified and directed.

Material and labour for coloured digital ceramic tiles in vertical surface as in walls, dado, etc. 450 x 300 x 7 mm thick set and jointed in neat cement slurry @3Kg/sqm and pointed in white or coloured cement to match including 10mm thick rendering in CM (1:3), complete all as specified and directed.

Material and labourfor glazed ceramic tiles coloured 450 x 350mm, 600mmx 300mm, 7 to 8 mm thick, set and jointed on vertical surface in neat cement slurry @3Kg/sqm and pointed in white or colour cement to match etc over and including rendering 10mm thick on other than fair face of brick work surfaces in CM 1:4, complete all as specified and directed

Material and labour 75mm thick PCC 1:3:6 type C-2, (20 mm graded stone aggregate)as plinth protection and finishing even and smooth without using extra cement incl making joints 12 mm wide of full depth of PCC at every 3 meters and at every change in direction and filling the same with sealing compund grade 'A' including necessary formwork, complete all as specified and directed.

Supply and fixing of powder coated aluminium ventilator fixed type half glazed and half gauged with and including hardware fittings, glazing, wire gauge, rubber packing, aluminium beading etc. as specified below and making good of wall surface to match with existing surface complete all as specified and directed : - Frame : 44.5 x 44.5 mm x 1.80 mm thick Middle rail : 44.5 x 44.5 mm x 1.80 mm thick Glazing: 5 mm thick frosted glass fixed with rubber gasket and aluminium beading. Wire gauge: stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.4 mm fixed with aluminium beading.

Supply and fixing of powder coated aluminium grill with frame fixed to by means stainless steel screws complete all as specified and directed.

Supply and fixing of factory made 100% solid wood plastic composite (WPC) door frame of size 75 mm x 50 mm made from wood plastic composite (single extruded process) material with density 780 Kg/Cum from ISO certified company door should be water proof termite proof fire retardant and having good screw holding capacity all as specification and drawing complete all as specified and directed.

Supply and fixing of 24 mm thick moulded WPC factory made 100% solid door (conforming as per IS-4020) made from 100% lead free single extruded with 2, 4 or 6 raised panel design on the front side with 10 mm deep mould on single side with wood grain texture and back side plain with density not less than 600 Kg/cum. Manufactured by an ISO : 9001-2015 certified company. The door should be water proof, termite proof, fire retardant and having screw holding capacity, complete all as specified and directed.

Supply and fixing of 150 mm long aluminium anodised barrel tower bolt of extruded section and fixed complete all as specified and directed.

Supply and fixing of 150 mm long aluminium handle, fabricated type, anodised etc complete all as specified and directed

Supply and fixing of butt hinges 100 mm size medium weight cold rolled stainless steel and fixed complete all as specified and directed.

Supply and fixing of aluminium alloy, anodised, sliding door bolt size 300 mm with hasp, staple (bolt ype) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and directed.

Supply and fixing of mild steel framed work such as door frames, grills, gratings, etc, with ends of bars shouldered and / or riveted or forged into spikes; framed guard bars; frame work of water tanks and similar work confirming to Fe-290 Gde-E-165 including necessary welding, drilling hole complete all as specified and directed

Material and labour for two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces of any description over 10 cm width or girth & complete all as specified and directed.

Supplying, fixing, jointing and testing galvanised steel water tubing 15mm dia bore medium grade (ISI Marked) with all fittings (ISI Marked) such as bend, elbow, socket, reducer etc fixed to walls and ceilings or laid in floors complete all as specified and directed

Supplying, fixing, jointing and testing galvanised steel water tubing 20mm dia bore medium grade (ISI Marked) with all fittings (ISI Marked) such as bend, elbow, socket, reducer etc fixed to walls and ceilings or laid in floors complete all as specified and directed

Material and labour cutting chases for concealed water tubing or concealed conduit wiring, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges, etc., cutting not exc 10 cm width or girth complete all as specified and directed.

Supply and fixing of vitreous china urinals, full stall type white (back or corner wall type), complete including providing and fixing plugs, bedding urinals against wall in CM 1:2, securing urinals to plugs with and including 60 mm long brass screws, pointing around urinal back in cement, CP waste coupling, waste pipe, automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe, complete all as specified and directed.

Supply and fixing of vitreous china squatting pan, ‘Orissa’ pattern, size 580 x 440 mm, white, with integral foot rests (excluding flushing cistern and flush pipe) water closet, including 600 mm long CI P-trap, connection to trap and to flushing pipe, anti syphonage pipe etc, and making good to floor complete all as specified and directed.

Supply and fixing of 10 litres capacity PVC low level valve less symphonic action type flushing cistern white with inlet, float valve, float and handle including brackets with 32 mm dia PVC pipe 600 mm long complete all as specified and directed.

Supply only PVC connection 15 mm dia 450 to 600 mm long with brass fly nut at both ends, complete all as specified and directed.

Supply and fixing of 500 ltr rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I, including supply & fix 20 mm dia GI light grade wash out pipe 450 mm long with plug and 20 mm dia GI light grade over flow pipe 600 mm long with fitting complete all as specified and directed.

Supply and fixing of ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe and fixed for 20 mm bore size complete all as specified and directed.

Supply and fixing of gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe 20 mm bore and fixed, complete all as specified and directed

Supply and fixing of vitreous China wash hand basin, white, flat back type of size 550mm x 400 mm fixed on and including cast iron cantilever bracket, 32 mm dia brass waste coupling and 32 mm dia PVC waste pipe, grating dome, etc including fixing of tap, waste fitting etc complete all as specified and directed. Note: Pillar tap shall be measured and paid under respective item.

Supply and fixing of 15mm dia swan neck pillar tap (for oval type WHB) brass chromium plated with capstan heads, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, and fixed complete all as specified and directed.

Supply and fixing of stop valves/angle valves fancy type chromium plated brass cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions fixed for 15 mm dia bore pipe complete all as specified and directed

Supply and fixing of bib tap long body fancy type cast copper alloy chromium plated with crutch or butterfly handle screwed down screwed for iron pipe or brass ferrule or fixed for 15 mm dia bore pipe complete all as specified and directed.

Supply and fixing of Chromium Plated brass soap dish fixed to wall with chromium plated brass screwed and cup washer complete all as specified and directed.

Supply and fixing of tubular towel rail 20mm dia type brass chrormium plated 600mm long stainless steel between flanges complete all as specified and directed

Supply and fixing of brass chromium plated ovehead shower with shower arm complete all as specified and directed.

Material and labour PVC (SWR) floor trap plain with grating including jointing with solvent cement 75 mm bore outlet complete all as specified and directed.

Supply and fixing of PVC (SWR) soil waste & vent pipe in any length without ears laid in floors, trenches or fixed to wall complete for 75 mm dia bore of pipe complete all as specified and directed.

Supply and fixing of PVC (SWR) soil waste & vent pipe in any length without ears laid in floors, trenches or fixed to wall complete for 110 mm dia bore of pipe complete all as specified and directed.

Supply and fixing of PVC (SWR) bends 75mm dia, T, reducer any radius with rubber ring joints, fixed to wall / floor / in trenches complete all as specified and directed.

Supply and fixing of PVC (SWR) bends 110mm dia, T, reducer any radius with rubber ring joints, fixed to wall / floor / in trenches complete all as specified and directed.

Supply and fixing of 110 mm dia PVC (SWR) vent cowl ,complete all as specified and directed.

Supply and fixing of roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming to Fe 410-W(Gde E-250) quality-A all as specified and directed

Supply and fixing of pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour as directed by GE having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Supply and fixing of pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick for ridge cover of any colour as directed by GE having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Material and labour for pre-polished pavement coloured chequred tiles glossy finish of size not less than 300 x 300 x 20-22mm thick with anti skid properties laid over 20 mm thick screed bed or bedding layer in CM 1:6 complete all as specified and directed.

Material and labour for 150 mm Salt-glazed stoneware drain pipes laid in trenches and jointed in CM 1:1 complete all as specified and directed.

Material and labour for cement concrete 1:3:6 type C-2 for 150 mm dia in concrete bed to drain pipes including packing under and haunching against the sides of pipes etc complete all as specified and directed.

Material and labour for soakage wells, of size of 1.8 Mtr x 3.00 Mtr effective depth as per HQ CE BZ TD Drg complete all as specified and directed.

Material and labour for cement concrete 1:2:4 type, B1 using 20 mm graded stone aggregates as in copings, roof padding/staging of water tank etc including necessary fromwork, weathering, slightly rounded or chamfered angles and throating complete all as specified and directed.

Material and labour 18 to 20mm thick granite(Zed Black colour as approved by GE) stone slab machine cut, bedded and jointed with grey cement slurry @3Kg/sqm and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing as in kitchen platform/dado/skirting /plateform counter top WHB in cluding cutting holes for oval shape /urinal partitions etc. including 15 mm thick cement screed bed 1:6 CM in horizontal or vertical surfaces including grinding the edges half round and polishing complete all as specified and directed.

Material and labour for 595 mm X 595mm false ceiling system , using hot dipped galvanised steel section exposed surface with precoated capping, GI powerd coated tee and cross tee of size 24x32mm & 24x27mm having 0.27mm gauge at every 600mm c/c interval and wall angle of size 19x19mm having 0.35mm gauge fixed to the wall. The above grid is tobe suspended at every 1200mm c/c in both direction using 2mm thick pre-straightened GI wire laying designer tile ivory painted (high pressure steam cured) of 4 mm thickness (as per IS 14862) of size 595x595 mm and ant ine of the design (cascadev or electra) , back of the tile duly sanded and finished with a coat of protective paint over the formed grid etc complete all as specified and directed.

Supply and fixing of MS joist channel (Fe 410-W Gde E-250 Quality A), angle or Tee section, MS tubes, flats square bars etc fixed indepently or framed or without connecting plates ,trusses etc any type framing including purlins and rafters etc confirming to Grade Fe 410-0 or Fe-310-0 complete all as specified and directed.

Material and labour for cutting chases, pinning in brick/PCC blocks wall in making good to facings where required in cement mortar 1:3 and cutting chases for concealed water tubing etc, cuttig exc 10cm and n. exc 20cm girth, complete all as specified and directed

Supply and fixing of factory made single extruded WPC (Wood polymer composite) Solid door frame/ chowkat of size 100X50 comprising of virign PVC polymer of K value 58-60 (suspension grade ) calcium corbonate and natural fibers ( wood powder/rice husk /wheat husk) and non toxic additives (max toxicity index of 12 to 100 gms) fabricated with mitred joints and applying PVC solvent cement and screwed with full body threaded star headed SS screws having min frame density of750Kg/cum screw withdrawal strength of 2200 N (face) & 1100 N edge,minimum compressive strength of 58 N/mm2, moduus of elasticity 900N/mm2 and resistance to spread of flame of class 'A' category with property of being termite / borer proof, water / moisture proof & fire retardant & fixed in postion with SS dash fasterns / hold fast of required dia and length,colour of door frame to match that of shutter all as specified and directed.

Supply and fixing of factory made single extruded WPC (Wood polymer Composite) Solid moulded Flush Door Shutter of 30 mm size comprising of virgin PVC resin of K value 58-60 (Suspension Grade), Calcium Carbonate and natural Fibers (Wood Powders/ rice husk/ wheat husk) and Non toxic additives (max toxicity index of 12 for 100 gms) having min density of 650 Kg/Cum and screw withdrawal strength of 1800 N (Face) &900 N (Edge) Minimum Compressive Strength of 50 N/mm2, Modulus of elasticity 850N/mm2 and resistance of spread of flame of class A category with property of being Termite/ Borer proof. Water/ Moisture Proof, Fire retardant and fixing with stainless steel but hinges of required size with necessary full body threaded star headed counter sunk SS Screws. All as per direction of Engineer - in- Charge, Materia test certificate and authentication should be compulsory provided by the manufacturing company.

Supply and fixing of aluminium anodised tower bolt 200 mm long of extruded section etc complete all as specified and directed

Material and labour for providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and specification.

Material and labour for providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and specifications.

Supply and fixing of aluminium extruded door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg, complete all as specified and directed.

Supply and fixing of 4 mm thick Figured glass, pin head type and glazing with oil putty in squares n.exc 0.5 sq. m in each pane, complete all as specified and directed.

Material and labour for forming 12mm thick Expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘A’ for thickness of 75mm complete all as speicified and directed

Supply and fixing of vitreous china wash down water closet pan (pedestal pattern) rimless wall hung WC with UF soft close slim seat cover, Hinges and acessories etc complete all as specified and directed.

Supply and fixing of single piece slim concealed Cistern with wall mounting frame, installation kit and "s type" drain pipe connection set for wall hung WC (with flush control panel)

Supply and fixing of flush control pate for concealed cistern, complete all as specified and directed.

Supply and fixing of vitreous china urinal (back inlet with fixing accessories size 385 x 325 x 635mm, complete all as specified and directed.

Supply and fixing of vitreous chinaware wash hand basin table top of size 575 x 430 x 175 complete including waste coupling ,waste pipe including fixing arrangement and cutting for and pinning in walls & making good complete all as specifed and directed.

Supply and fixing of concealed body for joystick basin mixter wall mounted with exposed parts, complete all as specified and directed.

Supply and fixing of exposed part kit of single lever basin mixer wall mounted consisted of operating lever, cartridge sleeve, wall flange, nipple & spout complete all as specified and directed.

Supply and fixing of soap dispenser with glass bottle in toilet block each one complete all as specified and directed.

Supply and fixing of toilet roll Holder CP, complete all as specified and directed.

Supply and fixing of fancy type glass corner 300mm radius of 10mm thick toughned glass with CP railing fixed with fancy type screws complete all as specified and directed.

Supply and fixing of health faucet mild steel chromium plated suitable for 15mm dia pipe with 1 or 1.25mtrmetre long flexible tube and ABS wall hook fixed to wall all as specified and directed.

Supply and fixing of urinal spreader of PTMT/ABS body of any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms), complete all as specified and directed.

Supply and fixing of 75 mm bore out let cast floor trap spun pipe (conforming to IS 3989) incl cockroach trap with gratings including including jointing to waste pipe fixed in cement concrete tpe B-1 (1:2:4) etc complete all as specified and directed

Supply and fixing of 75 mm bore cast iron spun pipe (conforming to IS 3989) soil, waste and vent pipes, in any length with or without ears with lead joints, laid in trenches or in floors, complete all as specified and directed

Supply and fixing of 75 mm bore cast iron spun pipe (conforming to IS 3989) soil, waste and vent pipes, in any length with or without ears with lead joints, fixed to wall vertically complete all as specified and directed

Supply and fixing of 100 mm bore cast iron spun pipe (conforming to IS 3989) soil, waste and vent pipes, in any length with or without ears with lead joints, laid in trenches or in floors or vertically with wall, complete all as specified and directed

Supply and fixing of 100 mm bore cast iron Bends of (any radius), spun pipe (conforming to IS 3989) diminishing piecs or tapers (larger bore measured) complete all as specified and directed

Supply and fixing of 75 mm bore cast iron Bends of (any radius), spun pipe (conforming to IS 3989) diminishing piecs or tapers (larger bore measured) complete all as specified and directed

Supply and fixing of 50 mm cast iron cowls spun pipe (conforming to IS 3989) complete all as specified and directed

Material and labour for providing and applying external water proof wall putty of 1mm to 1.5mm thickness over plastered surface to prepare the surface even and smooth, complete all as specified and directed.

Material and labour for applying two coats of acrylic distemper over a coat of primer, white or tinted over 0.75 to 1 mm thick wall care putty in two coat complete all as specified and directed.

Material and labour for preparation of new surface applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm, complete all as specified and directed.

Material and labour for providing plain cement concrete 1:3:6 type C-2 (using 40mm graded stone aggregate) as in foundation and mass concrete complete all as specified and directed.

Material and labour for reinforced concrete pipes,150mm dia class NP-2 laid and jointed complete with collars complete all as specified and directed.

Material and labour for PCC 1:3:6 type C0 ( using 12.5 mm thick graded stone aggragate) as in surface channel drain, complete all as specified and directed

Supply and fixing of frosted toughened glass 10mm thick fixed to wall complete all as specified and directed.

Supply and fixing of aluminium composite panel 6 to 8mm thick with stainless steel 304 grade as in framing and necessary bracket incl door as in water closet area complete all as specified and directed

Material and labour for preparation of newly plastered surface of walls including corners and applying two coats of distemper oil emulsion over applying of 1-2 mm thick wall care putty finish wall surface even & smooth complete all as specified and directed.

Supply and fixing of round/square shape 18 watt Alpha Panel cool white light 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting with 3 core copper conductor flexible cable of suitable size from ceiling rose to connector of the light including disconnecting and taking down old existing light fitting of any description and in any position complete all as specified and directed.

Supply and fixing of waterproof LED Flood light 50 Watt RGB colour including connecting with 3 core copper conductor flexible cable of suitable size from ceiling rose to connector of the light including disconnecting and taking down old existing light fitting of any description and in any position complete all as specified and directed.

Supply and fixing of LED bush and spike light ,9 Watt, 3000K , Efficacy 80 lm/w ,made with single piece pressure die-cast aluminium housing and ip 65 degree of protection suitable for outdoor applicatios like garden,tree uplighting including connecting with 3 core copper conductor flexible cable of suitable size from ceiling rose to connector of the light including disconnecting and taking down old existing light fitting of any description and in any position complete all as specified and directed.

Supply and fixing of LED flood light 120 watt 230 V AC outdoor type with thermal management in multiple optics and equiped with IP66 protection with impact and corrosion resistant with driver and lamp, including connecting with 3 core copper conductor flexible cable of suitable size from ceiling rose to connector of the light including disconnecting and taking down old existing light fitting of any description and in any position complete all as specified and directed.

Supply and fixing of fully diffused recessed mounted 2'x2' LED luminaire with UGR<19, for Full Glow Office Complaint indoor spaces, LED 36 Watt ,6500K in White & gray housing with profiled & flat diffuser including connecting with 3 core copper conductor flexible cable of suitable size from ceiling rose to connector of the light including disconnecting and taking down old existing light fitting of any description and in any position complete all as specified and directed.

Supply and fixing of 200W LED Focusing Imaging Light Power Supply AC100-240V/ 50-60HZ Light Source 56 (3030) or (3535) 3-5W white LED light source Light Source Power 200W Total Power 240W Color Temperature 3200K or 5600K Color Rendering Index 92% or more Dimming Mode DMX signal dimming or manual button dimming Control Channel 1 channel Focusing Mode manual knob sliding focus Light Angle adjustable from 10-20° Working Environment 0°- 40°C (32°-104°F) Protection Level IP20 , including hanging/mounting arrangement, including connecting with 3 core copper conductor flexible cable of suitable size from ceiling rose to connector of the light including disconnecting and taking down old existing light fitting of any description and in any position complete all as specified and directed.

Supply and fixing of 200W LED Spotlight (Color Temperature Adjustable) Power Supply AC100~240V, 50/ 60Hz Power 220W Light Source Highly indicated COB LED lamp beads Color Rendering Index Ra>94 Light Source Life 100,000 hours Color Temperature 3000K-6000K adjustable Control Panel LCD display four buttons Beam Angle 15-60 degree Manual zoom Dimming 0-100% linear dimming Heat Dissipation Method copper tube radiator Channel Mode /4CH Control Mode DMX512 control/ manual control Working Temperature -25°C, including connecting with 3 core copper conductor flexible cable of suitable size from ceiling rose to connector of the light including disconnecting and taking down old existing light fitting of any description and in any position complete all as specified and directed.

Supply and fixing in replacement of LED type strobe lights specification and wattage as per existing at RIMC, complete all as specified and directed.

Supply and fixing of 54 LEDs 3W 4 digital display. There dimmer manual mode, running, strobe, speed adjustable, adjust the data with a power saving, boot automatically recover data. DMX 512 protocol - 6 DMX channels Main dimmer , RGB color changing , Strobe effect, Auto play with internal programs , Master/Slave function, Stand alone mode . Power supply: AC 100V-AC240V 50/60 Hz. Light power connect maximum range 15pcs to 30pcs. Consumption: 160W, including connecting with 3 core copper conductor flexible cable of suitable size from ceiling rose to connector of the light including disconnecting and taking down old existing light fitting of any description and in any position complete all as specified and directed.

Supply and fixing of LED COB wash light 150w Working Temperature(℃): 20 - 50 IP Rating:IP20 for indoor Emitting Color: COB RGB Lamp: 150W, R,G,B Input Voltage(V):AC100-240V 50/60Hz CRI (Ra>): 90 Working Lifetime(Hour):100000 Certification: CE, FCC, ROHS Control signal: DMX DMX Channel:6, including connecting with 3 core copper conductor flexible cable of suitable size from ceiling rose to connector of the light including disconnecting and taking down old existing light fitting of any description and in any position complete all as specified and directed.

Supply, Install, Testing & Commissioning in replacement of 2 Channel analog Amplifier, 1500 Watts @ 4 ohms Audio Power Amplifier, Toroidal or better complete all as specified and directed. Approved Makes: Powersoft/ British Acoustics/ OSL/ OHM/ Lacoustics/ D&B

Supply, Install, Testing & Commissioning replacement of 2 Channel analog Amplifier, 2000 Watts @ 4 ohms, Audio Power Amplifier, Toroidal or better complete all as specified and directed. Approved Makes: Powersoft/ British Acoustics/ OSL/ OHM/ Lacoustics/ D&B

Supply, Install, Testing & Commissioning replacement of 32 Channel Mixer 24 Channel Analogue Mixer complete all as specified and directed. Approved Makes: Mackie/ British Acoustics/ OSL/ Yamaha

Supply, laying and testing of XLPE insulated galvanised steel strip or wire armoured elctric power cable with stranded aluminium conductor 1100 V grade of size 50 sqmm 3.5 core after cutting to required length with necessary glands, nuts, bolts, and lugs complete all as specified and directed

Material and labour and installation bus bar , factory fabricated bus bar chamber out door pedestal type made out of 2.0 mm thick CRCA sheet siz 750x500x400mm duly painted with powder coating, simens grey /RAL fitted with four Nos aluminium bus bar of capacity 250 Amps duly mounted epoxy insulator , cable connections of incoming and outgoing cables duly insulated PVC heat shrinkable sleeve 1.1 KV grade including one No MCCB 250 Amps , 04 pole , 50 KA , with adjustable thermal stetting Ics=100% Icu, including glands c/p lugs etc including 50x50x6mm angle iron frame 450mm height above ground level and 450mm below ground level , angle iron frame shall be embeded in PCC (1:2:4) type B 1 block of size 200x200x200mm complete all as specified and directed

Supply and fixing of tube 'Light' grade galvanised with all fitting laid in trenches, fixed to wall and floor of 80 mm dia for cable protection complete all as specified and directed.

Material and labour for sand cushioning and covering of UG cable using crushed metal sand in trenches for cable protection all as specified and directed.

Supply and laying of high density polyethylene pipes (HDPE) of pressure rating HDPE Pipes PN 6 size 110mm (4") laid in trenches for the protection of HT UG Cable, complete all as specified and directed

Material and labour for point wiring using approved colour coding as per IS, with 1.5 sqmm copper conductor cable (multistrand) PVC insulated FRLS (unsheathed), concealed type, drawing in and including PVC conduit 25 mm dia, having wall thickness not less than 2mm for one light/ fan point or one bell/buzzer, controlled by one switch, including 1.5 sqmm PVC insulated copper conductor continuous earth wire,incl suitable modular white cover plate with frame and required socket and modular flush box complete, all as specified and directed.

Supply and fixing of Modular switch single pole, one way, 6 Amps, 1 module, complete all as specified and directed.

Supply and fixing of round/square shape 18 watt Alpha Panel cool white light 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with 3 core flexible copper conductor cable, complete all as specified and directed.

Material and labour for point wiring using approved colour coding as per IS, with1100 Volts, grade 1.5 Sqmm. (nominal area) ,PVC insulated but unsheathed multistranded copper conductor single core FRLSH cable drawn through and including non metallic medium duty rigid PVC concealed conduit (medium duty) 20mm dia or higher size complete with all accessories such as socket, elbow, junction box, bell mouth, bend, reducer etc including pressed iron/steel suction box of thickness1.2mm for mounting of switches, sockets, fan regulators etc with 3 mm thick plastic laminated sheet as top cover, and 1.5 Sqmm. (nominal area) single core FRLSH,PVC insulated 1100 Volts, grade multi stranded unsheathed copper conductor cable green colour as earth wire upto common earth and connected to earth dolly including cutting chases for conduits and sinking's for boxes and making good to walls, floors etc complete all as specified and directed for following:-

One light point /Exhuast fan controlled by one way switch, complete all as specified and directed.

One three pin 5 Amp socket on same board with other switches, complete all as specified and directed.

One three pin 5 Amp socket on independent board, complete all as specified and directed.

Description all as per Item No 146.00 here-in- before but one three pin 15 Amps switch socket out let on the independent board with 2.5 sq mm PVC insulated FRLSH copper conductor and 2.5 Sqmm FRLSH copper conductor for continuous earthing, complete all as specified and directed.

Supply and fixing of Switch piano flush type single pole one way 230 Volts 6 Amp complete all as specified and directed.

Supply and fixing of Socket outlet 3 pin , 230 Volts 5/6 Amps flush type multipurpose 5 pin, complete all as specified and directed.

Supply and fixing of Socket outlet multipurpose having provision for 3 pin, 230 Volts 15/16 Amp and 3 pin, 5/6 Amp, piano flush type IS: 1239-1988 marked with valid CML No complete all as specified and directed.

Supply and fixing of switch piano; flush type, single pole, one way, 230 Volts 15/16 Amps IS: 3854 marked with valid CML No. complete all as specified and directed.

Supply and fixing of ceiling rose surface bakelite 3 terminals of size 65x25mm, complete all as specified and directed.

Supply and fixing of lamp holder polycarbonate insulated body, with back plate suitable for batton fitting, complete all as specified and directed.

Supply and fixing of wall mounted LED tube light fitting 1x20 watts extruded aluminium polycarbonate covers PF 0.9 and above operating voltage 140V-270V colour temp 6500K & lumen input output 95 Lumen per watt and connected to ceiling rose with required length of two core flexible copper cable 23/0.0076 fixed on wall/roof complete all as specified and directed.

Supply and fixing of energy saving ,surface mounted, LED 10 watt Bulk head luminaire with decorative oval diffuser comprrising of high brightness LEDs complete all as specified and directed.

Supply and fixing of Exhaust fan, steel body, AC single phase 230 V of size 300 mm sweep, 1400 RPM, 1300CMM, 70 watt with blade, frame and louver, complete with shutters and connecting up ceiling rose to connector block of fan including making of holes and grouting of nuts and bolts PCC (1:2:4) B-1 block including complete all as specified and directed.

Supply and fixing of Water heater storage type, ABB body with glass lined tank and heating element upto 2KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece and connecting up including making of holes and grouting of nuts and bolts PCC (1:2:4) B-1 block complete all as specified and directed.

Supply and fixing of Water heater storage type, ABB body with glass lined tank and heating element upto 2KW capacity 50 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece and connecting up including making of holes and grouting of nuts and bolts PCC (1:2:4) B-1 block complete all as specified and directed.

Supply and fixing of distribution board SPN 8 Way with 100 amps, double door, for mounting MCBs isolator, ELCBs etc factory made, IS: 13032 marked with valid CM/L No fabricated out of CRCA sheet not less than 1.2 mm thick fitted with DIN channel, neutral and earthing link and bus bar. DBs shall be semi glossy finished with epoxy polyester based powder paint sprayed and baked at high temperature, painted in seven tank process and also incoming and outgoing connections with suitable size of lugs/thimbles/glands complete all as specified and directed. The DBs shall be of IP 43 protection. Note:- DB and MCCB/MCB shall be of same make

Supply and fixing of distribution board SPN 4 Way with 200 amps, double door, for mounting MCBs isolator, ELCBs etc factory made, IS: 13032 marked with valid CM/L No fabricated out of CRCA sheet not less than 1.2 mm thick fitted with DIN channel, neutral and earthing link and bus bar. DBs shall be semi glossy finished with epoxy polyester based powder paint sprayed and baked at high temperature, painted in seven tank process and also incoming and outgoing connections with suitable size of lugs/thimbles/glands complete all as specified and directed.. The DBs shall be of IP 43 protection. Note:- DB and MCCB/MCB shall be of same make

Supply and fixing of distribution box MCB protected socket with sheet steel enclosure 20 A MCB DBOXX Combo DP including PLUG TOP for Geyser including connection with suitable size copper lugs complete all as specified and directed.

Supply and fixing of MCB SPN 240 Volt 10 KA 20- 40 Amp 'C' series conforming to IS including connection with suitable size copper lugs complete all as specified and directed..

Supply and fixing ofi MCB single pole 240 volt, 10 KA, 5-32 Amp, 'C' series confirming to IS including connection with suitable size copper lugs complete all as specified and directed.

Supply and fixing of of isolator /MCB TPN 63 Amps , 415 volts including connection with suitable size copper lugs complete all as specified and directed.

Supply and fixing of Single pole and neutral encolsure with a two pin and earth plug with socket complete with one single pole MCB 20 Amps, including connection with suitable size copper lugs complete all as specified and directed.

Material and labour for earthing complete with galvanized steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground vertically to a depth not less than 2.25 mtr below ground level with top edge of the earth plate at a depth not less than 1.5 mtr below ground level, earth plate surrounded by and packed with a 15 cm thick layer of char coal dust and common salt, earth lead GI wire 4.00mm dia by means of bolts, nuts, Check nuts and washers of galvanised iron and thimbles and other end of the earth wire all as shown in electrical plate No 3 of MES Schedule Part-I (2009) connecting to earthing test point & to main switch board and testing on completion with and including necessary excavation and earth work in any type soil, earth lead connected to earth test point & to main switch board and protected by galvanized iron pipe medium 15 mm bore, and water pipe 20 mm bore GI light grade with funnel and wire mesh, PCC (1:3:6) type C-1 (using 20mm graded crushed stone aggregate) for earth pit with 40 x 40 x 6mm mild steel angle iron frame for cover, internal surface of concrete shall be given 10mm thick plaster in CM 1:4, pre cast RCC (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) 75mm thick cover, reinforced with 8mm dia deformed or TMT bars 100mm C/C both way with 12mm dia round bar handle, GI medium grade watering pipe 20 mm dia with funnel and wire mesh and 15mm dia GI light grade earth lead protection pipe etc complete all as specified and directed. NOTE: (i) Earth lead wire and its protection pipe upto and including 7.5 mtr only from the top of earth electrode are included under this item. (ii) Any joints in earth lead from earth electrode to test point shall not be allowed/permitted. (iii) If the desired earth resistance is not found within permissible limit shall be re done by contractor at no extra cost.

Supply, install, test and commisssioning reversible type (Hot and cool) split air conditioning unit, 1.5 Ton ,3 star, eco friendly refrigerant complete with drive motor, air cooled copper condenser with all accessories varied speed and dual rotary compressor, including fixing the out door units with mounting bracket , made Up of heavy duty GI steel, wall mounted type, Powder coated incl nuts & bolt etc as per manufacture recomendation and fixing of room unit on wall , providing and making interconnection, including refregerent piping with nitryle rubber insulation and control cable from indoor to out door, first charging of refrigerent gas including cordless remote, complete all as specified and directed.

Supply and fixing of Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170V to 250V with output voltage stailized at 230V with accuracy of + 2.5% and of capacity 03KVA, complete all as specified and directed.

Material and labour for concealed submain wiring with 3 runs(N+P+E) of 4 Sqmm single core,PVC insulated, unsheathed, multistranded copper conductor FRLS cable 1100 volts grade drawn through and including concealed/surface PVC conduit pipe of medium duty not less than 20 mm dia including necessary PVC conduit specials and connecting with suitable size thimble complete all as specified and directed. Note:- (i) 3 runs of 4 Sqmm size PVC copper cable, and one run of PVC conduit shall be measured as one unit length. (ii) The quoted rates shall be deemed to be inclusive for cutting chases in wall/pillars/columns etc. of any description for concealing the conduits to required depth & making good the disturbed surface in cement mortar 1:4 including finishing the surface to match with the existing surface. The portion of sub main wiring at ceiling shall be in surface conduit of suitable size fixed on ceiling surface with using necessary aceessories/fittings.

Description all as per item No 169 but with 3 runs(N+P+E) of 6 Sqmm single core copper FRLS conductor and PVC conduit not less than 24 mm dia, complete all as specified and directed. Note:- 3 runs of 6 Sqmm size PVC copper cable, and one run of PVC conduit shall be measured as one unit length.

Supply and fixing of Chimney with steel hood with connected accessories for Bldg No P-171 (a) Stainless Steel Hood Chimni+ Filters 24 Feet (b) GI Ducting 29 Feet (approx 290 Squre Fit) (c) Excel Fan 24" 1 HP Heavy Duty Commercial (d) Fitting Material which is necessary required to installation of Chimney Note: The above requirement of chimney shall be fulfilled by 06 Nos of electric Chimenys of size 4 feet (120 CM) each.

Supply and fixing of Chimney with steel hood with allconnected accessories for Bldg No T-13 (a) Stainless Steel Hood Chimni + Filters 5 Feet (b) GI Ducting 29 Feet (approx 240 Squre Fit) (c) Excel Fan 18" 1 HP Heavy Duty Commercial (d) Fitting Material which is required to installation of Chimney. Note: The above requirement of chimney shall be fulfilled by 02 Nos of electric Chimenys of size 4 feet (120 CM) each.

Supply and fixing of flood light ,210 W,Outdoor type with high power LED's as light sources . Energy saving environmental friendly, long life, exclusive innovative epoxy powder coated die-cast aluminium housing with dedicated heat sink and toughened glass with inbuilt control grar woth IP66,CCT :5700K,Efficacy : 100 Im/W,Impact resitace of IK07 and integrated driver with 5 KV inbuilt surge protection complete all as specified and directed.

Supply and fixing of vertical TPN DBs with, double door with IP-43 protection suitable for TP/FP MCCB 160 Amps as incomer and TPN/SPN MCB as outgoing 415 volts 4-way without MCCB & MCBs, including suitable size copper bus bar and neutral link fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and directed. (Note:- MCBs will be measured and paid for separetely)

Material and labour MCB Tiple pole and neutral , 40 to 100 Amp 'C' series 10 KA 415 Volt including connection with suitable size copper lugs complete all as specified and directed.

Supply, install, commissioning and testing of commercial Air curtain unit for prevention of dust and conditioned air losses, single phase, 220 V, 50 HZ, made out of MS/CRCA sheet of minimum thickness 18 gauge finished with two coats of red oxide primer and final coat of synthetic enamel paint (oven baked) with MS - CRC 18 gauge square perforated suction grills, Aluminium alloy fans and single phase electric motor, nozzles etc, complete with fittings and accessories so as to produce 1 - 1.5 m/sec air velocityat floor level for door opening 40"x 78"

NOTE:- Amount of credit of Rs. 17258.00 for retrieved materials is mentioned in Schedule of Credit Page No 31 of tender documents in pdf form which will be deducted offline while acceptance of tender.

V r traders (BID ID -3383882)