Building Work

Construction of D-1 type Residential quarter for Prant officer at Navsari, Dist. Navsari.

BILL OF QUANTITIES

Percentage Rate Tender

Item Description of Item Quantity Unit Rate In Amount

1 Excavation for foundation upto 1.5 m depth including 313.50 Cumt 120.01

sorting out and stacking of useful materials and

disposing off the excavated stuff upto 50 Meter

lead.(A) Loose or soft soil

2 Excavation for foundation for depth from 1.5 m to 211.40 Cumt 166.35

3.0 m including sorting out and stacking of useful

materials and disposing off the excavated stuff

upto 50 Meter lead.(B) Dense or Hard soil

3 Filling in foundation and plinth with sand in layers of 27.40 Cumt 471.69

20 cm. Thickness including watering ramming and

consolidating etc. comp.

4 Filling available excavated Earth (Excluding Rock) in 197.40 Cumt 133.65

trench plinth side of foundation . in layer not

excluding 20 cm in depth consolidation each

deposited layer by ramming and watering etc.

5 Filling foundation and plinth with murrum or 24.40 Cumt 296.29

selected soil in layer of 20 cm in thickness including

ramming watering and consolidating etc. complete

6 Applying general insecticide pest control treatment 121.90 Sqmt 51.52

to floors, cupboards etc including labour material etc.

complete. Using Imidacloprid 30.5 SC. As Per

Part -II (0.075% concentration by mass) is

recommended 10.5ml chemical diluted with 5 liters

of water application 0.5 liters chemical/ sqm of

surface is recommended as per I.S.

7 Providing and laying controlled cement concrete 106.10 Cumt 3927.44

M.150 and curing complete including the cost of

formwork and excluding reinforcement for

reinforced concrete work in (A) Foundations and

8 Providing and laying controlled cement concrete M- 114.20 Cumt 4639.94

250 and curing complete including the cost of form

work but excluding the cost of reinforcement for

reinforced concrete work in (A) Foundations,

footings, and Mass concrete. footing

9 Providing and laying controlled cement concrete M- 7.50 Cumt 7559.85

250 and curing complete including the cost of form

work but excluding the cost of reinforcement for

reinforced concrete work in (d) columns Up to Plinth

10 Providing and laying cement concrete 1:3:6 (1- 8.80 Cumt 3080.90

Cement : 3- coarse sand : 6- machine cut stone

aggregates 40 mm nominal size) and curing complete

excluding cost of formwork in (A) Foundation and

Item Description of Item Quantity Unit Rate In Amount

11 Providing and laying controlled cement concrete M- 8.00 Cumt 7523.49

200 and curing complete including the cost of form

work but excluding the cost of reinforcement for

reinforced concrete work in Columns, pillars posts

and struts G.FLOOR

12 Providing and laying controlled cement concrete M- 1.90 Cumt 7523.49

200 and curing complete including the cost of form

work but excluding the cost of reinforcement for

reinforced concrete work in Columns, pillars posts

and struts F.FLOOR

13 Providing and laying controlled cement concrete M- 16.20 Cumt 5996.37

250 and curing complete including the cost of form

work but excluding the cost of reinforcement for

reinforced concrete work in Ground & Plinth BEAMS

14 Providing and laying controlled cement concrete M- 16.00 Cumt 5232.81

150 and curing complete including the cost of form

work but excluding the cost of reinforcement for

reinforced concrete work in (C) Plinth Slabs

15 Providing and laying controlled cement concrete M- 12.60 Cumt 6216.55

200 and curing complete including the cost of form

work but excluding the cost of reinforcement for

reinforced concrete work in (C) Ground floor Beams,

16 Providing and laying controlled cement concrete M- 1.20 Cumt 6640.75

200 and curing complete including the cost of form

work but excluding the cost of reinforcement for

reinforced concrete work in (c) Chhajja for Ground

17 Providing and laying controlled cement concrete M- 1.10 Cumt 6871.03

200 and curing complete including the cost of form

work but excluding the cost of reinforcement for

reinforced concrete work in (c) Lintal for Ground

18 Providing and laying controlled cement concrete M- 18.00 Cumt 6619.54

200 and curing complete including the cost of form

work but excluding the cost of reinforcement for

reinforced concrete work in (C) Ground floor Slab

19 Providing and laying controlled cement concrete M- 1.10 Cumt 7098.28

200 and curing complete including the cost of form

work but excluding the cost of reinforcement for

reinforced concrete work in (E) Stair case for

Ground Floor to first floor

20 Providing and fixing 90 cm high Stainless steel railing 6.00 Rmt 3603.68

made from anticorrocive 304 grade S S pipe of

mm dia (16Gauge) as hand rail with S S 304 grade

Baluster of 38 mm dia (16Gauge) as a vertical

support fixed in RCC slab at 1.2m c/c including

three horizontal S S pipes of 25 mm dia (16Gauge) at

eqal distance fixed by 18.75 mm dia (16Gauge) S S

pipe with baluster including accessories as per

detailed drawing as directed etc. complete.

Item Description of Item Quantity Unit Rate In Amount

21 Providing IS Mark TMT FE 550 D bar reinforcement 15578.00 Kg 94.99

for RCC work including bending & placing in position

complete up to All floor Level

22 Brick work using common burnt clay building bricks 22.30 Cumt 4121.55

having crushing strength not less than 35 kg./Sq.Cm.

in foundation and plinth in Cement Mortar 1:6 (1-

Cement : 6 -fine sand) (B) Conventional

23 Brick work using common burnt clay building bricks 56.90 Cumt 4403.40

having crushing strength not less than 35 Kg/Sq.cm.

in super structure above plinth level upto floor two

level in cement mortar 1:6 (1cement : 6 fine sand)

24 Brick work using common burnt clay building bricks 11.60 Cumt 4403.40

having crushing strength not less than 35 Kg/Sq.cm.

in super structure above plinth level upto floor two

level in cement mortar 1:6 (1cement : 6 fine sand)

25 Half brick masonry in common brunt clay building 14.60 Sqmt 669.34

bricks having crushing strength not less than

Kg/Sq.Cm. in Cement mortar 1:4 (1- Cement : 4 -

coarse sand ) brick work in superstructure above

plinth level upto floor two level(B) Conventional For

26 Providing 15mm thick mala cement plaster in single 380.00 Sqmt 201.34

coat on Rough (Similar) side of single or half birck

walls / concrete wall for interior plastering and

finished even in C M 1:4 (1 cement : 4 coarse sand)

with 1 x1 cm grooves at juction of structural

members etc. comp. For Ground floor

27 Providing 15mm thick mala cement plaster in single 58.30 Sqmt 201.34

coat on Rough (Similar) side of single or half birck

walls / concrete wall for interior plastering and

finished even in C M 1:4 (1 cement : 4 coarse sand)

with 1 x1 cm grooves at juction of structural

members etc. comp. For Frist floor

28 Providing 10 mm. Thick Mala trovel plaster in single 113.30 Sqmt 180.80

coat for plastering on ceiling and soffits of stairs and

finished With 1x1 CM Grooves at juction of structual

member in : (I) Cement mortar 1:4 (1 cement :

sand) with Mala finished of neat cement slurry etc.

complete.Ground Floor

29 20 mm Thick sand faced Double coat Gutka plaster 330.90 Sqmt 339.15

on walls with 1x1cm grooves consisting of 12 mm

Thick backing coat of c.m. 1:3 (1 cement : 3 sand) and

8 mm Thick finishing coat of c.m. 1:1 (1 cement :

sand) etc. complete. For all height and as per pattern

sample aprroved by the architect or directed

engineer in-charge

30 Providing throating or plaster drip and moulding to 35.90 Rmt 43.22

R.C.C. Chhajja.

Item Description of Item Quantity Unit Rate In Amount

31 Applying two coats of Birla or Asian acrylic lapy 483.60 Sqmt 40.59

(putty) & two coats of primer of approved brand and

manufacture on new wall surface to give an even

shade including thoroughly brushing the surface free

from mortar dropping and other foreign matter and

sand papered smooth.

32 Wall painting (Two coats) with plastic emulsion 370.30 Sqmt 81.05

paint of approved brand and manufacture on

undecorated wall surface to give an even shade

including throughly brushing the surface free from

mortar droppings and other foreign matter and sand

papered smooth.

33 Wall painting (two coats) with plastic emulsion paint 113.30 Sqmt 86.60

of approved brand and manufacture on undecorated

ceiling surface to give an even shade including

throughly brushing the surface free from mortar

droppings and other foreign matter and sand

papered smooth.

34 Finishing wall with weather proof 100 % acraylic 330.90 Sqmt 117.40

emulsion (Apex or equivalent type) paint of

approved brand and manufacture and of required

shade on exterior wall surface to give an even shade

over and including primery coat with Alkaly

resistance primer of approved brand after

thoroughly brushing surface to remove all dust and

remains of loose powdered material etc. copm. for all

35 Providing And filling with good quality cinder(steam 4.20 Cumt 486.82

coal) as directed by engineer in charge in sunks in

layers of 15 cm thick,including watering,placing

,ramming well etc as directed, for all floor.

36 Providing and laying controlled cement concrete M- 1.70 Cumt 5786.29

200 for RCC work and curing complete including the

cost of form work but excluding the cost of

reinforced concrete work in coping on Ground Floor

37 Providing and laying controlled cement concrete M- 1.40 Cumt 5786.29

200 for RCC work and curing complete including the

cost of form work but excluding the cost of

reinforced concrete work in coping on First Floor

Item Description of Item Quantity Unit Rate In Amount

38 Providing & fixing in position standard extruded 4.40 Sqmt 4888.40

Aluminum Four track (4 shutter + 1 Mosquito net

shutter) with Standard Extruded Colour Anodied

Alluminium Section Equivalent to Jindal Series E

(30mm) Section Numbered: Frame -Bottom with

Gutter -21198, Frame Top & Side-21204 ,Shutter Top

& Bottom 20993, Shutter Inter Lock -20550 ,Shutter

Side (handle) -20553 With 5mm thick Transparent

Tinted Float Glass With EPDM Rubber Gasket, Air

Lock Stirip and Finishing , Joint With Section Sealant,

With Power Coated Standard Alluminium

Fitting.with as per window size including all

required materials labours and equipments as per

detailed drwg. as directed.

39 Providing & fixing in position standard extruded 4.90 Sqmt 4553.08

Aluminum Three track (3 shutter + 1 Mosquito net

shutter) with Standard Extruded Colour Anodied

Alluminium Section Equivalent to Jindal Series E

(30mm) Section Numbered: Frame -Bottom with

Gutter -21203, Frame Top & Side-20837 ,Shutter Top

& Bottom 20993, Shutter Inter Lock -20550 ,Shutter

Side (handle) -20553 With 5mm thick Transparent

Tinted Float Glass With EPDM Rubber Gasket, Air

Lock Stirip and Finishing , Joint With Section Sealant,

With Power Coated Standard Alluminium

Fitting.with as per window size including all

required materials labours and equipments as per

detailed drwg. as directed.

40 Providing & fixing in position standard extruded 1.20 Sqmt 4200.59

Aluminum Two track (2 shutter + 1 Mosquito net

shutter) with Standard Extruded Colour Anodied

Alluminium Section Equivalent to Jindal Series E

(30mm) Section Numbered: Frame -Bottom with

Gutter -21203, Frame Top & Side-20837 ,Shutter Top

& Bottom 20993, Shutter Inter Lock -20550 ,Shutter

Side (handle) -20553 With 5mm thick Transparent

Tinted Float Glass With EPDM Rubber Gasket, Air

Lock Stirip and Finishing , Joint With Section Sealant,

With Power Coated Standard Alluminium

Fitting.with as per window size including all

required materials labours and equipments as per

detailed drwg. as directed.

Item Description of Item Quantity Unit Rate In Amount

41 Providing & fixing in position standard extruded 0.90 Sqmt 3808.71

Openable alluminium CASEMENT window with

Standard Extruded Colour Anodied Alluminium

Section Equivalent to Jindal Series E (30mm) Section

Numbered: Frame -Bottom with Gutter -21203,

Frame Top & Side-20837 ,Shutter Top & Bottom

20993,Shutter Side (handle) -20553 With 5mm thick

Transparent Tinted Float Glass With EPDM Rubber

Gasket, Air Lock Stirip and Finishing , Joint With

Section Sealant, With Power Coated Standard

Alluminium Fitting.with as per window size

including all required materials labours and

equipments as per detailed drwg. as directed.

42 Providing & Fixing in position standard extruded 1.10 Sqmt 2584.99

approved colour anodised Aluminum Ventilator with

outer frame 63.50 x 38.10 x 1.95 mm (of Jindal

Section No.4605,@ Wt 1.094 kg/Rmt ) with 3mm

thick Bajari figure adgesteble tinted louvers glass

fixed to alluminium strip blade including fixtures,

fastenning, labours and equipments as per detailed

drawing as directed. For Ventilators

43 Providing and fixing 35 mm thick flush door solid 2.60 Sqmt 6449.86

core Double shutter having 1mm thick lamination on

both side and 35 mm x 12mm teak wood batten on

shutter with 4 Nos 400mm Brass Antique Flinta

Main Door Handle,1 Nos S.S. Stopper 20 Cm long of

ASIS 304, 2 nos S.S. Aldrop 20 Cm long of ASIS

Grade, 3 nos S.S Hinges and necessary Locking

system ,fixtures & fastenings etc. directed by

engineer in charge.for Dubble Shutter

44 Providing and fixing 35 mm thick flush door solid 10.50 Sqmt 5774.17

core single shutter having 1mm thick lamination on

both side and 35 mm x 12mm teak wood batten on

shutter with 2 nos 15cm long stainless steel handle,1

Nos S.S. Stopper 20 Cm long of ASIS 304, 2 nos S.S.

Aldrop 20 Cm long of ASIS 304 Grade, 3 nos S.S

Hinges and necessary Locking system ,fixtures &

fastenings etc. directed by engineer in charge.for

Item Description of Item Quantity Unit Rate In Amount

45 Providing and fixing FRP frame size 100 x 50 mm and 5.70 Sqmt 2362.39

35 mm thick FRP depress panel single shutter

having extra reinforcement on sides & edges in Gel

coat finish.The core of the both shutter & frame is to

be filed up with injected fire retradat grade

polyurethene foam done in situ along with embeded

wooden pieces for stiffening & also taking hinges &

fintures.The whole FRP frame & single or double

shutter is to be waterproof, weatherproof ,termite

proof & resistance to mild acid/alkali.Rates are to be

inclusive of S.S hinges with necessary screws &

alluminum fixtures & fastenings & fartener

sleeve.Colour and Shade approved by Engineer-In-

46 P & L 60x45 cm Machine polished Machine cut Blue 4.20 Sqmt 1064.54

Kota Stone slab flooring over 20 mm (average)thick

base of cement mortar 1:6 (1-cement 6-coarse sand)

or L.M 1:1.5 (1 Lime putty : 1.5 coarse sand laid over

and 3-5 mm Epoxy Groove in Joint with pigment to

match the shade of slab including rubbing and

polishing etc.complete (A) 25mm thick

47 P & L 60x45 cm Machine polished Machine cut Blue 0.50 Sqmt 1620.04

Kota Stone slab 25 mm thick in riser of steps,skirting

dedo and pillars laid on 10 mm thick cement mortar

1:3 (1-cement 3-coarse sand) and 3-5 mm Epoxy

Groove in Joint with pigment to match the shade of

slab including rubbing and polishing etc.complete

48 Providing & Laying 600 x 600 GVT vitrified 8 mm 83.90 Sqmt 1106.96

thick tile flooring over 20 mm (average) base of

cement mortar 1:6 ( 1 cement: 6 coarse sand) on new

surface or fixing on existing flooring by adhesive

material including dismentaling of existing flooring

and 3-5 mm Epoxy groove in joint including finised

with flush pointing & cleaning the surface etc.

complete shade approved by directed engineer in-

49 Providing and laying GVT Vitrified tiles 8 to 10 mm 9.60 Sqmt 1700.84

thick , 600 x 600 mm in skrting risers of steps and

dedo on 10mm thick cement plaster 1:3 (1- cement :

3-coarse sand) and 3-5 mm Epoxy Groove in Joint.

50 P & L antiskid ceramic tiles 30 x 30 cm size 6 mm 9.30 Sqmt 1047.37

thick in flooring treads of steps and landing laid on a

bed of 12 mm thick cement mortar 1:3(1-cement:3-

coarse sand)finishing with flush pointing in 3-5 mm

Epoxy Groove in Joint.

51 P & L glazed tiles tiles size 30 x 60 cm 6 mm thick in 39.50 Sqmt 1492.78

skirting risers of steps and dedo on 10 mm thick

cement plaster 1:3 (1-cement:3coarse sand) and 3-5

mm Epoxy Groove in joint.

Item Description of Item Quantity Unit Rate In Amount

52 Providing and laying machine cut free edge machine 11.00 Sqmt 2158.37

polished granite stone 18mm thick finished treads

and risers in with 1cm projecting, nozing rounded

moulding in tread laid over 12 mm (av.) thick bases

of cement mortar 1:6 (1-cement : 6-coarse sand)

jointed with grey or colour cement slurry including

rubbing and polishing incl. making Three No.s of

grooves of size 3mm X 3mm along the length of

treads etc. complete

53 Providing and laying China mosaic type water 134.40 Sqmt 1113.02

proofing treatment on terrace including cleaning the

surface by wire brush as directed including applying

neat cement slurry @ 2.75 Kg/Sq.m mixed with

waterproofing compound after cleaning the surface,

laying cement concrete using brickbats 25 to

mm size well immersed in water with 50% of cement

mortar 1:5 (1 cement : 5 coarse sand) mixed with

waterproofing compound over 20 mm thick layers of

cement mortar 1:5 (1 cement : 5 sand) to required

slope including rounding of junctions of walls and

slabs and after two days of proper curing, applying

second coat of cement slurry, finishing the surface

with 20 mm thick cement mortar 1:4 and China

mosaic tiles and finally finishing the surface with

white cement slurry. After completion, the whole

terrace shall be flooded with water for a period of

two weeks. shall provide a minimum 5 (Five) years

warranty/guarantee for the complete waterproofing

treatment against leakage, seepage and failure of the

waterproofing system from the date of completion,

and shall rectify any defects arising during the

warranty period as directed by the Engineer-in-

54 Providing and fixing mirror polished 18 mm thick 28.10 Sqmt 2025.05

Black Granite stone with full round edge and

polished of approved quality in clading on sill and

around the doors/ windows/ ventilation with 12 mm

thick cement mortor CM (1:4) and fixing with cement

slurry & adhesive including moulding of exposed

edges as directed by engineering in charge etc.

55 Providinfg and fixing Safty grills of required pattern 251.70 Kg 110.39

for windows/ Door using necessary M.S angle/ M.S

pipe, M.S flats and other structural steel at required

spacing including cutting, welding and fabriction etc.

including one coat of primer of approved quality and

two coats of oil painting as per detail drawing etc

56 Providing erecting and fixing double coated Syntex 2000.00 Litre 3.95

PVC. (ISI) water tank of required capacity each with

all necessary fittings and connection etc. complete on

Item Description of Item Quantity Unit Rate In Amount

57 Providing laying and jointing in true line and level 40.00 Rmt 195.67

50mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water

including fittings make as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help

of clamp at every two metre C/C or shall be concelled

as directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

58 Providing laying and jointing in true line and level 50.00 Rmt 148.12

40mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water

including fittings make as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help

of clamp at every two metre C/C or shall be concelled

as directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

59 Providing laying and jointing in true line and level 20.00 Rmt 91.84

25mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water

including fittings make as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help

of clamp at every two metre C/C or shall be concelled

as directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

60 Providing laying and jointing in true line and level 30.00 Rmt 72.65

15mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water

including fittings make as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help

of clamp at every two metre C/C or shall be concelled

as directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

61 Providing, laying and jointing in true line and level 10.00 Rmt 834.38

160 diametre U.P.V.C (Type B) conforming to IS

13592-1992 with one end plain and other end

socketed with rubber ring, & fittings conforming to

ISI 14735-1999 of approved make for drainage

system pipe line, pipe shall be jointed with each

other with rubber lubricant, pipe shall be fixed on

wall using of PVC clamp of the size 160 mm diametre

x 210 mm length x 196 mm heigh at every 2000 mm

center to center or shall be concealed in walls as

directed including necessary fittings such as bends,

shoes etc. including testing of pipes and joints and

jointed with adhesive solvent cement including cost

of all materials.

Item Description of Item Quantity Unit Rate In Amount

62 Providing, laying and jointing in true line and level 15.00 Rmt 857.65

110 diametre U.P.V.C (Type B) conforming to IS

13592-1992 with one end plain and other end

socketed with rubber ring, & fittings conforming to

ISI 14735-1999 of approved make for drainage

system pipe line, pipe shall be jointed with each

other with rubber lubricant, pipe shall be fixed on

wall using of PVC clamp of the size 110 mm diametre

x 149 mm length x 145 mm heigh at every 2000 mm

center to center or shall be concealed in walls as

directed including necessary fittings such as bends,

shoes etc. including testing of pipes and joints and

jointed with adhesive solvent cement including cost

of all materials.

63 Providing, laying and jointing in true line and level 15.00 Rmt 719.12

75 mm dia. UPVC SWRType B pipe conforming to IS

13592-1992 with one end plain and other end

socketed with rubbering and fitting conforming to ISI

14735-1999 of approved make for drainage system

pipe line, pipe shall be jointed with each other with

rubber lubricant, pipe shall be fixed on wall using of

PVC clamp at every 2000 mm c/c or shall be

conceled in walss as directed including necessary

fittings such as bends, shoes etc. including testing of

pipes and joints and jointed with adhesive solvent

cement including cost of all materials.

64 Providing and fixing in PVC SWR cowel went 75mm 3.00 No 15.66

dia to pipes.(B) 75mm dia.

65 Providing and fixing in PVC SWR cowel went 110mm 3.00 No 28.79

dia to pipes.(B) 110mm dia.

66 Providing and fixing PVC SWR Nahni trap IS 14735 5.00 No 585.37

for drain - 100 mm diameter with jali of the following

nominal diameter of self cleansing design with C.I

scread down or hinged grating including the cost of

cutting and making good the walls.

67 Providing and fixing wash down water closet 2.00 No 2247.25

(European type W C pan) with integral P and S trap

including jointing the trap with soil pipe in cement

mortar 1:1 (1 cement five sand) including providing

and fixing plastic seat cover for wash down WC with

CP brass hinges and rubber buffers back plastic seat

and including providing and fixing with complete

fitting such as lead valve siphon 15 mm dia brass ball

valve with polythene float CP brass handle unions

and couplings for connection with inlet out let and

over flow pipes 40 mm dia porcelain enameled flush

bend including cutting holes in walls and making

good the same connection the flush bend with cistern

and closet vitreous china.

Item Description of Item Quantity Unit Rate In Amount

68 Providing and fixing Anglo Indian Toilet Commode 1.00 No 13197.67

Water Closet – P Trap White Ceramic EWC 535mm D

x 455mm W x 410mm H including jointing the trap

with soil pipe in cement mortar, cutting holes in

walls/floors and making good the same. The item

includes providing and fixing plastic seat cover with

C.P. brass hinges and rubber buffers, complete

fittings such as 15 mm brass ball valve with

polythene float, C.P. brass handle, unions and

couplings for inlet, outlet and overflow connections,

and 40 mm dia porcelain enameled flush bend for

connection between cistern and water closet,

complete in all respects as per direction of Engineer-

69 Providing and fixing brass wall mixer faucet for 3.00 No 3194.63

bathroom, wall mounted type, comprising hot and

cold water control with provision for overhead

shower / spout, including wall mixer body, bends,

C.P. flanges, necessary fittings and accessories, fixing

arrangement complete in all respects as per

direction of Engineer-in-Charge.

70 Providing and fixing Jaquar Metropole Dual Flow 3.00 No 5555.00

Flush Valve, 40 mm size, Code: FLV-CHR-1089N,

brass body with premium chrome finish, complete

with all fittings, connectors, accessories and

installation, as per the manufacturer's specifications

and as directed by the Engineer-in-Charge

71 Providing and fixing 100 × 100 mm square overhead 3.00 No 2171.50

shower, single flow, stainless steel face plate with

ABS chrome finish body, Rubit cleaning system,

complete with all fittings, accessories and

installation, as directed by the Engineer-in-Charge

72 Providing and fixing 15 mm dia C.P. brass Angle Stop 7.00 No 1464.50

Cock with Wall Flange, complete with all fittings,

accessories and installation, as directed by the

Engineer-in-Charge

73 Providing and fixing ball cock of approved. quality as 1.00 No 189.84

directed.(A) Copper Metal (ii) 50mm dia.

74 Providing and fixing Urinal of approved quality 1.00 No 1584.86

including connection with trap and with integral

longitudinal flush pipe.(A) Squating plate pattern

white earthenware 550mm x 300mm.

75 Providing and fixing washbasin with single hole for 4.00 No 1619.87

pillar tap with C.I. or M.S. brackets painted white

including Rubber plug, sutting holes and making

good the same but excluding fittings and also

including rate of C.P. brass waste for washbasin or

sink (A) 32mm dia. and M.I. fisher union for

washbasin or sink. (A) 32mm dia.; (A) Vitreous

China:(ii) Flat Back washbasin 550 mm x v 400mm

size. (i) In white colour.

Item Description of Item Quantity Unit Rate In Amount

76 Providing and fixing 600mm x 450mm bevelled edge 4.00 No 851.13

mirrror of superior glass mounted on 6mm thick A.C.

sheet or plywood sheet and fixing to wooden pluge

with C.P. brass screws and washers.

77 Providing and fixing C.P. brass towel rail comlete 3.00 No 616.42

with C.P. brass brackets fixed to wooden plugs with

C.P. brass scews (B) 600mm x 20mm size.

78 Providing and fixing C.P. brass towel ring of 3.00 No 757.50

approved quality and size, with C.P. brass brackets

fixed to wooden cleats with C.P. brass screws, or with

concealed fittings as per manufacturer's design,

including drilling holes and making good the walls,

all complete as per the direction of the Engineer-in-

79 Providing and fixing Jaquar Opal Prime Bib Cock with 8.00 No 2777.50

Wall Flange, Code: OPP-CHR-15037PM, 20 mm dia,

brass body with chrome finish, complete with all

fittings, accessories and installation, as per

manufacturer's specifications and as directed by the

Engineer-in-Charge

80 Providing and fixing Pillar Cock with Swan Neck 4.00 No 2070.50

Spout (Left/Right) and Aerator, Cat. No. F2014104,

brass body with premium chrome finish, complete

with all fittings, flexible connection, accessories and

installation, as per manufacturer's specifications and

as directed by the Engineer-in-Charge

81 Providing and fixing in position 300 mm high, 150 20.00 No 707.00

mm wide English letters made from 1.0 mm thick

stainless steel sheet as directed by Engineer in

charge with all necessary tools & plants etc.

82 Providing and fixing chromium plated brass half trun 4.00 No 263.77

flush cock of approved quality including fixing in pipe

line etc. complete (ii) 25mm dia.

83 Providing and fixing S.W. gully trap with C.I. grating 3.00 No 1246.92

brick masonry chamber and water tight C.I. cover

with frame of 300mm x 300mm size (inside) with

standard weight (i) Square mouth traps (B) 150mm x

100mm size P or R type

84 Constructing brick masonry chamber for 9.00 No 3172.41

underground C.I. Inspection chamber and bends with

briocks having croshing strength not less than 35Kg.

Cm2 in C.M. 1:5 precast RCC cover 455mm x 610mm

intenal dimensions with frame (R.C.C. top slabe with

1:2:4 mix (1-cement :2- coarse sand :4-graded stone

aggregate 20mm size) foundation concrete 1:5:10

inside plaster 15mm thick with cement mortar 1:3

finished smooth with a floating coat of neat cement

on walls and bed concrete etc. complete (i) Inside

dimensions 455mmx 610mm and 450mm deep for

single pipe line.

Item Description of Item Quantity Unit Rate In Amount

85 Constructing brick masonry chamber for 8.00 No 3883.45

underground C.I. Inspection C.I. Inspection chamber

and bends with briocks having croshing strength not

less than 35Kg. Cm2 in C.M. 1:5 precast RCC cover

500mmx 700mm intenal dimensions with frame

(R.C.C. top slabe with 1:2:4 mix (1-cement :2- coarse

sand :4-graded stone aggregate 20mm size)

foundation concrete 1:5:10 inside plaster 15mm

thick with cement mortar 1:3 finished smooth with a

floating coat of neat cement on walls and bed

concrete etc. complete (i) Inside dimensions

500mmx 700mm and 450mm deep for single pipe

86 Extra over items for every additional depth of 0.1M. 5.00 No 242.39

of part thereof beyond 450mm depth for Brick

masonry chamber.(i) for 455mm x 610mm size.

87 Extra over items for every additional depth of 0.1M. 5.00 No 264.86

of part thereof beyond 450mm depth for Brick

masonry chamber.(i) for 500mm x 700mm size.

88 Providing cement vata (10cm x 10cm size) quarter 26.00 Rmt 24.28

round in cement mortar 1:1 including neat cement

finishing watering etc. Complete

89 Providing and fixing MS Ladder of required pattern 250.00 Kg 115.14

with MS flats(30x3mm) or round or square bars

(12mm) at required spacing & with round headed

bolts and nuts or screws or welding including primer

coat of approved quality and two coats of oil paintas

as directed by engineer in charge

90 Providing and fixing in position 150 mm high, 10.00 No 404.00

English letters made from 1.0 mm thick stainless

steel sheet as directed by Engineer in charge with all

necessary tools & plants etc. complete.

91 Constructing kitchen Platform of 18 mm thick 2.50 Sqmt 4101.61

Polished Black Granite at top and 25 mm thick Kota

stone slab one side polished at bottom with

cementing Materials / adhsives including makeing

necessary grooves in walls with Vertical sandwich

two Kotastone 25 mm support every 60 cm centre

to centre or as required including all labour material

of approved quality incl. full moulded round front

edge granite strip of one side polished and jointed

with grey cement slurry including rubbing and

polishing etc. complete for all floors

92 Providing and fixing 25 mm thick polished kota 1.70 Sqmt 667.61

stone Shalve with full round edge and double side

polished of any required and fixing with cement

slurry & adhesive including both exposed edges cut

and Smooth Finished as directed by engineering in

charge etc. complete.

Item Description of Item Quantity Unit Rate In Amount

93 Providing & fixing 25mm thick cupboards of plywood 5.10 Sqmt 3408.75

shutter including fixing 19 mm and 6mm thick back

to back flush all proof plywood & including with Teak

Wood frame 50 mm x 50 mm size as directed etc.

complete including necessary both side lamination

mm thick outer side & 0.80mm thick inner side fixing

by necessary SS hinges, handles, magnet, stoppers,

etc. as directed including fevicol, and other hardware

material required. Plywood and all fixture shall be of

ISI quality and as approved by engineer-in-charge

including cost of teak wood beading, one coat of

primer and two coats of oil painting or polishing as

94 Providing and fixing Kitchen sink with C.I. or M.S. 1.00 No 3640.04

brackets, painted white including cutting holes in

walls and making good the same but excluding

fittings. (C) Vitreous China Sink.(i) 600mm x 450mm

95 Providing and fixing kitchen platform trolley having 2.80 Sqmt 12631.06

three drawers of SS (IS 304) of required size like

thali, katleri, perforated, partition, cupsosar type in

kitchen platform having drawer front side and

backside by using 19mm thick all proof plywood of

ISI quality all side laminated etc. as directed. The size

of SS (IS 304) basket of size 4" to 18" for thali, dish,

katleri, perforated, partition, cupsosar type as

directed including necessary S.S. fittings, handles,

nobs, telescopic channels, etc. as directed

96 Providing and fixing to wall ceiling and floor 10.0 Kg. 80.00 Rmt 339.05

F/Cm2 working pressure poluthene pipes of the

following outside Dia. Low densidy, complete with

special falnge compression type fittings, wall clipsetc.

including making good the wall ceiling and

floor.(G)110 mm

97 Providing and fixing to wall ceiling and floor 10.0 Kg. 20.00 Rmt 696.90

F/Cm2 working pressure poluthene pipes of the

following outside Dia. Low densidy, complete with

special falnge compression type fittings, wall

clipsetc. including making good the wall ceiling and

floor.(G)160 mm

98 Providing junction for rain water juncton chamber of 4.00 No 8999.10

size 0.60x0.60x0.75m with excavation of size

1.96x1.96 m & 0.15m thick c.c.1:2:4 bed concrete

including brick masonary wall in CM 1:6 of 0.75m

height & 0.23m thick with 15mm thick cement

plaster inside & outside & 1.06x1.06 RCC (1:2:4) slab

of thickness 0.15m with CRS steel and 0.60mx0.45m

cast iron manhole cover with frame weight not less

than 35 kg as per directed by Engineer-in-charge

Item Description of Item Quantity Unit Rate In Amount

99 Providing Filter chamber of Brick work in C:M 1:6 of 1.00 No 16421.59

size 2.06mx1.20m x1.20m & excavation dimension of

2.66mx 1.81x1.35m including C.C 1:2:4 bed concrete

of 0.15m thick including brick work in c.m 1:6 for

23cm thick wall including 15mm thick cement

plaster inside & outside with cement slurry & 10cm

thick RCC 1:2:4 top cover with frame of minimum

weight of 35 kg & filling filter material kapchi in

layers (25-40mm & 10-20mm) & BT metal 40mm &

sand as per directed by Engineer-in-charge

100 Providing Recharging pit of size 2.0m Dia.& 2.0m 1.00 No 15093.44

depth of water logging with excavation filling the pit

with gravel & sand in layers including making

300mm dia bore depth of 4.5mt & above concrete

with kapchi in layers (25-40mm & 10-20mm) & BT

metal 40mm & filling brick as directed by Engineer-

101 Constructing brick masonry chamber for 3.00 No. 7180.44

underground C.I. Inspection chamber and bends with

briocks having croshing strength not less than 35Kg.

Cm2 in C.M. 1:5 C.I. cover with frame (Light duty)

455mm x 610mm intenal dimensions, total weight of

cover with frame to be not less than 38Kg. (Wt. of

cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top

slabe with 1:2:4 mix (1-cement :2- coarse sand :4-

graded stone aggregate 20mm size) foundation

concrete 1:5:10 inside plaster 15mm thick with

cement mortar 1:3 finished smooth with a floating

coat of neat cement on walls and bed concrete etc.

complete.(iii) Inside dimensions 600mm x 850 mm

and 450mm deep for pipe lines with three or more

102 Providing and laying (two level or slopes) and 25.00 Rmt. 526.46

jointing with stiff mixture of Cement Mortar in

proportion 1:1, Salt glazed stone ware pipes of pipes

150mm laying lime concrete 1:2:4 (1-Lime putty :2-

Fine samd : 4-Graded brick aggregates 40mm

nominal size) bedding for stoneware pipes of

following internal diameters with necessary

formwork and curing complete.

103 Providing laying (to level or slopes) and jointing 97.00 Rmt. 678.01

reinforced concrete Light duty non-pressure pipes

I.S. class NP2 of the following internal diameter with

collars and butt ends prepared for collar joints

including testing of joints complete.(D) 300mm

104 Drilling of 165 mm dia bare in over burden strata 100.00 Rmt 196.95

and further drilling of 165mm dia bore in all typs of

strata with DTH ring including lowering of casing

pipe up to requied length and testing etc. including

testing with ben meter.

Item Description of Item Quantity Unit Rate In Amount

105 Providing and lowering of 165mm FVPVC pipe zero 90.00 Rmt 536.57

to overburden strata

106 Providing and lowering 165 mm dia PVC pipe etc 90.00 Rmt 252.50

107 Providing and fixing M. S. cap –plug hinge type with 1.00 No. 165.64

frame of required design for 150mm dia Bore casing

108 Suppling and installing submersible pumping set 1.00 Set 26300.40

7.50 HP manufactured as per IS standard including

non return valve sluice valve flexible cable (

asrequired 70 mtr length ) volt meter, panel board,

capacitor,starter,switch, pressure guage with

accessories of approved manufacture tools of

Hours power capacity.

109 Providing and fixing check or non return pully wheel 1.00 No. 1111.00

valve of 50 mm diameter.

110 Providing and fixing to wall,ceiliing and floor 100.00 Rmt 794.18

galvanised mild steel tubes ( Medium grade ) of the

following nominal bore, tube, fittings and clamps

included making good the wall, ceilling and floor (F)

111 Box cutting the road surface to proper slope and 352.00 Cum. 106.81

camber for making a base for road work including

removing the excavated stuff and depositing on the

road side slope as directed upto 50Mt.lead.

112 Filling in plinth with sand under floors including 48.00 Cum. 416.12

watering ramming, consolidating and dressing

complete for road work

113 Construction of granular sub-base 150 mm thick by 92.00 Cum. 793.86

providing coarse graded machine crushed B.T.

material satisfying MOST specification of grading I

(B.T. stone aggregate 53 mm to 26.5 mm 35 %,

to 4.75 mm - 45 % and 2.36 mm below - 20 %

)including spreading in uniform layer with motor

grader on prepared surface, mixing by mix in place

method with rotavator at OMC and compacting with

vibratory roller to achieve the desired density etc.

114 Providing and laying wet mix macadam base course 95.00 Cum. 920.11

250 mm thick using machine crushed B.T. chips as

per required gradation mixing with required

optimum quantity of water, conveying the mix to site

of work, spreading in to grade and camber with

mechanical paver and consolidation each layer with

vibratory roller including cost of material labour

plant and equipment etc. complete.

Item Description of Item Quantity Unit Rate In Amount

115 Compaction and finishing of cement concrete road 473.00 Sqm 63.63

by trimix M.250 process providing extra Labour

charges for the trimix vacume dewatering service

process on cement concrete road sutface by using

vacuum dewatering pump floater surface vibrator

including making groves and rough finish to surface

including leveling etc complete.

116 Providing and fixing pre-cast Rubber Dye inter 200.00 Sqm 704.07

locking concrete block 60mm thick with grade of

concrete M30 pnumatic compressed by mechanically

pressed and as per approved design confirming to IS

15658: 2006 including 35mm Sand layer for levelling

and filling the joint with sand in proper line and level

as per guidelines of IRC SP 63-2018 etc complete.

117 Providing and Laying homoginious Grey cement 200.00 Rmt 370.68

based concrete kerbing of size 30 cm x 30 cm x 10 cm

size as per detailed drawing having grade of concrete

M25 grade, including necessary excavation, BBCC

1:5:10 7.5 cm as per ddetailed drawing fixing in line

and level, filling joints in CM 1:3 with smooth

finished, white washing three coats etc. complete as

directed by Engineer in charge.

118 Providing and fixing decorative entrance slidng gate 450.00 Kgs 163.62

made out of cast iron and various mild steel tabular

section combination , the MS gate with sliding

mechanisum of all including pattern and die making

cutting , welding , grinding, fabrication , fixing in

position at compound wall with necessary pedestal,

bearing block and other locking arrangement. The

entrance gate should be painted with two coats of

priming coat of paint, and two coat of oil paint etc

complete. As per detail design and instruction of

119 Supplying FIRE bucket round bottom of 9 litres 4.00 Nos 180.00

capacity made out of 24 gauge G.I Sheet with extra

handle at bottom duly painted white inside and Red

out side with FIRE mark. Filled with dry-sand and

kept on existing stand provided or hung on wall

120 Supplying and erecting floor mounting Stand for 1.00 Nos 3500.00

keeping four nos. of FIRE buckets comprising

mm in length, 900 mm height frame made out of

30mm x 30 mm x 4 mm angle iron with cross suports

legs, welded with 4 hooks and duly painted with one

coat of red lead and two coats of approved enamelled

121 Supply, Filling and Fixing of following type of 2.00 Nos 5000.00

approve make fire extinguishers CO2 type fire

extinguisher, Capacity 4.5 Kg. (conforming to IS-

Item Description of Item Quantity Unit Rate In Amount

122 Design , Supply and installation of Safety Signage 1.88 SQ INCH 11.00

made of Zinc Sulphilde based glow in dark , Rigid

sheet with High Luminous property enclosed in a

transperent weather proof UV stabilized plastic

pasted on 3 mm thick clear acrylic sheet such as

EXITS, EMERGENCY EXIT, DO NOT USE LIFT DURING

FIRE, FLOOR MARKINGS, FIRE LIFT, STAIRCASE

EXIT, FIRE ALARM CALL POINT, FIRE HOSE REEL,

FIRE HYDRANT POINT etc.

123 Supply, Filling and Fixing of following type of 2.00 Nos 2600.00

approve make fire extinguishers Dry powder type,

Capacity 5 Kg. (conforming to IS:2171 with cylinder

fully charged).

124 Earthwork for embankment including breaking 327.60 Cum 165.25

clods, dressing with all lead and lift (excluding

watering and consolidation)(E) From Borrow area

within all lead

125 Rolling of Earth work in layers with power roller 327.60 Cum 22.89

including filling in depressions which occure during

126 Point wiring for Light / Bell with 2-1.5 sq.mm & 17.00 Pt. 582.77

earth wire of 1.5 sq.mm (Green) both are of ISI

marked 1.1 kV grade FRLS PVC insulated multi

strand copper wires up to 10 mtr length , in below

type of pipe erected with 6A Modular type switch /

bell push & accessories and earth continuity of

following type, erected on PVC / Metallic/Wooden

box, single mounting base frame covered with

textured/metallic/white front plate modules erected

on / in wall / ceiling as per pipe erected, with

necessary Lamp holder/ceiling rose / H.D.Connector

as directed. (f) with medium class Rigid PVC pipe and

accessories erected concealed in wall/ceiling

complete Cat. III

127 For point wiring in bathroom and W/C and 6.00 Pt. 291.39

128 Point wiring for FAN with 2-1.5 sq.mm & earth wire 5.00 Pt. 809.01

of 1.5 sq.mm (Green) both are of .ISI marked 1.1 kV

Grade FRLS PVC insulated multi strand copper wires

up to 10 mtr length, in below type of pipe erected

with 6A Modular type switch and hum free EME step

type electronic fan regulator mounted and

accessories with earth continuity of following type

erected on PVC / Metallic/Wooden box, single

mounting base frame covered with

textured/metallic/white front plate modules

erected on / in wall / ceiling as per pipe erected. with

necessary ceiling rose / H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and accessories

erected concealed in wall/ceiling complete Cat. III

Item Description of Item Quantity Unit Rate In Amount

129 Point wiring for Individual Plug with & earth wire of 5.00 Pt. 612.06

1.5 sq.mm (Green) both are of ISI marked 1.1 kV

grade FRLS PVC insulated multi strand copper wires

up to 10 mtr length, in below type of pipe erected

complete with Modular type switch & 5 pin Plug

erected on PVC / Metallic/Wooden box covered with

appropriate front plate modules erected on / in wall

/ ceiling as per pipe erected with following type of

accessories. [I] For 6A Plug and 6 a switch with 2-1.5

sq.mm Cu. Wire from nearby switchboard/mcb db

board (f) with medium class Rigid PVC pipe and

accessories erected concealed in wall/ceiling

complete Cat. III

130 Point wiring for on board Looped Plug with 6A 11.00 Pt. 309.06

Modular type switch & 5 pin socket erected on PVC /

Metallic/Wooden box, single mounting base frame

covered with textured / metallic/white front plate

modules erected on / in wall / ceiling with following

type accessories Cat. III

131 Point wiring for Two Way Controlled Light Point 4.00 Pt. 725.18

with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (green)

both are of .ISI marked 1.1 kV grade FRLS PVC

insulated multi strand copper wires erected in below

type of pipe with 6A Modular type switches and

following type of accessories erected on PVC /

Metallic/Wooden box, single mounting base frame

covered with textured / metallic/white front plate

modules erected on / in wall / ceiling as per pipe

erected. with necessary batten/angle holder or

ceiling rose or H.D.Connector as directed. (f) with

medium class Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete Cat. III

132 Providing following type of Modular Type 2.00 Nos 160.59

Accessories mounted with PVC / metallic/Wooden

box, single mounting base frame covered with

textured / metallic/white front plate , modules

erected with necessary connections as per site

situation directed by Engineer In charge. (3) Two

Pin/RJ-11 Telephone Socket[A] For One Gang Cat.III

133 Providing following type of Modular Type 1.00 Nos 160.59

Accessories mounted with PVC / metallic/Wooden

box, single mounting base frame covered with

textured / metallic/white front plate , modules

erected with necessary connections as per site

situation directed by Engineer In charge. (4) TV Co-

axial Socket outlet Cat.III

Item Description of Item Quantity Unit Rate In Amount

134 Providing following type of Modular Type 2.00 Nos 398.95

Accessories mounted with PVC / metallic/Wooden

box, single mounting base frame covered with

textured / metallic/white front plate , modules

erected with necessary connections as per site

situation directed by Engineer In charge. (5)

Electronic hum Free steps EME Fan regulator

135 Providing following type of Modular Type 8.00 Nos 180.79

Accessories mounted with PVC / metallic/Wooden

box, single mounting base frame covered with

textured / metallic/white front plate , modules

erected with necessary connections as per site

situation directed by Engineer In charge. (9)

Amp. SP one way switch Cat.III

136 Providing following type of Modular Type 8.00 Nos 199.98

Accessories mounted with PVC / metallic/Wooden

box, single mounting base frame covered with

textured / metallic/white front plate , modules

erected with necessary connections as per site

situation directed by Engineer In charge. (10)

6/16Amp. Universal socket Cat.III

137 Providing and erecting Mains with 1.1 kV grade FRLS 198.00 Mtr. 104.03

PVC insulated ISI marked stranded Copper conductor

wire in following type of pipe to be erected

concealed in /flushed on wall/ceiling, with 1.5 sq.

mm copper conductor FRLS PVC insulated stranded

wire of green colour for earth continuity of following

size (A) With medium class Rigid PVC pipe and

accessories (b) 2 wire 2.5 sq. mm

138 providing and erecting Mains with 1.1 kV grade FRLS 162.00 Mtr. 140.39

PVC insulated ISI marked stranded Copper conductor

wire in following type of pipe to be erected in / on

wall / ceiling with 2.5 sq. mm copper conductor FRLS

PVC insulated stranded wire of green colour for

earth continuity of following size (A) with medium

class Rigid PVC pipe and accessories (a) 2 wire 4 sq.

139 providing and erecting Mains with 1.1 kV grade FRLS 60.00 Mtr. 326.23

PVC insulated ISI marked stranded Copper conductor

wire in following type of pipe to be erected in / on

wall / ceiling with 2.5 sq. mm copper conductor FRLS

PVC insulated stranded wire of green colour for

earth continuity of following size (A) with medium

class Rigid PVC pipe and accessories (h) 4 wire 6 sq.

140 Supplying and erecting Flexible PVC insulated multi 28.00 Mtr. 58.58

strand multi core 1.1 kV grade ISI marked copper

wires of following size to be erected as directed. (e)

1.50 Sq.mm 3 core round PVC sheathed

Item Description of Item Quantity Unit Rate In Amount

141 Providing & Erecting approved make following size 25.00 Mtr. 39.39

of TV Co-axial flexible cable comprising inner

conductor of solid bare copper insulated with Foam

PE & Secondary conductor made of poly - Aluminium

film bonded Al. Braids @ suitable coverage overall

sheathed with black PVC insulation. (b) RG-6

142 Supplying & erecting approved make Telephone 50.00 Mtr. 20.20

Cable electrolytic copper conductor PE insulation

twisted in two pairs, & wrapped with FRLS PVC tape

& sheathed with FRLS PVC or HFFR outer Jacket

suitable for telephone wiring & confirming to C-DOT

erected in existing pipe. of following size of

conductors & nos.of pairs. With necessary

connections. [A] Conductor Size 0.5 mm (a)

Unarmoured (2) Two Pairs

143 Supplying & erecting approved make LAN cable of 25.00 Mtr. 47.47

following size in existing pipe as per direction [C]

144 Providing & erecting Switch board for Computer or 1.00 Nos. 1133.22

electric apparatus consisting of following modular

type accessories mounted with PVC/ Metallic

concealed/ open box with single mounting base

frame covered with textured/ metallic/ white front

plate,modules erected with necessary connections as

directed 1 no. 6A/16A universal plug-switch

combined. 3 nos. 6A Switch 3 nos. 6A 5 pin Plug

For Modular Type Accessories Cat. III

145 Call bell gong type suitable for 230 volts, 50 Hz. AC 2.00 Nos. 42.42

supply complete Erected

146 Supplying and erecting LED indoor fittings with LEDs 11.00 Nos. 373.70

of wattage 0.2 Watt to 0.5 Watt assembled on single

MCPCB, with housing used as a heat sink shall be

made of thick sheet Steel conforming to IS:

513/CRCA/ aluminium die cast powder coated and

high U.V. & corrosion resistance with diffuser with

company mark/name 160V to 270V, Power Factor

more than 0.95, THD < 15%, CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt, LED LED driver

efficiency > 85 % ( fitting required LM-79 & LM-80

Certificates) (NOTE: Below description have shown

ranges of Wattage capacity of LED fittings.The

Engineer incharge may select any wattage capacity

between the ranges shown.) (A) Tube Light with

integral driver (iv) 22-24 Watts, Surge - 2KV,IP-20,

conventional 4 feet Cat.III

Item Description of Item Quantity Unit Rate In Amount

147 Supplying and erecting led lamps with following 9.00 Nos. 112.11

wattage capacity of 220 to 240 voltage, minimum

15000 burning hours life, 500 V in built-surge

protection,Polycarbonate diffuser, mounting suitable

for E14 / E27 / B22 lamp holders, pf >= 0.5 (A) LED

Lamps integral type, with PC diffuser suitable LAMP

holder (ii) 5 to 8 watts Cat-III

148 Supplying and erecting LED street light / Flood light 12.00 Nos. 4248.06

fittings with High power White LEDs wattage of

Watt and above assembled on single MCPCB,

efficiency more than 130 lm/w and corrosion free

High pressure die cast aluminum housing with

smooth finish powder coated and heat sink extruded

aluminium with diffuser and Polycarbonate optics/

lenses, with toughened glass with company

mark/name engraved or embossed 160 to

V,Power Factor more than 0.95, THD < 10 %, CCT

3000 K to 5700K,Uniformity ratio > 0.45, Luminaire

efficacy > 100 lumens/watt . LED driver efficiency >

85 %.( fittings required LM-79 & LM-80 certificates)

(NOTE: Below description have shown ranges of

Wattage capacity of LED fittings.The Engineer

incharge may select any wattage capacity between

the ranges shown.) (A) Street Light (IP-65), Surge

protection -4KV integral and ,Light must have

440VAC line supply with over-voltage protection. (ii)

48 - 59 Watts Cat-III

149 (C) Post Top Lantern LED fitting comprises of finish 2.00 Nos. 4096.56

cast aluminum spigot and spun aluminum canopy

fixed with opal polycarbonate, pipe arrangement for

vertical mounting driver and accessories wired up to

terminal block.IP 65 (ii)32-40W Cat-III

150 Providing and erecting Miniature circuit breaker 14.00 Nos. 297.95

single pole 0.5A to 2A system and having breaking

capacity 10 KA to be erected in existing box.

confirming to IS 8828/1996 with ISI Mark Cat-III

151 Providing and erecting Miniature circuit breaker 12.00 Nos. 123.22

single pole 6A to 25A suitable to operate on 240 V

A.C. system and having breaking capacity 10 KA to

be erected in existing box. confirming to IS

8828/1996 with ISI Mark Cat-III

152 Providing & erecting 240 V MCB double pole switch 9.00 Nos. 362.59

for motor & inductive load (C Curve) having 10 KA

breaking capacity & confirms to IS : 8828 in existing

box having following capacity (B) 40 Amp. Cat-

Item Description of Item Quantity Unit Rate In Amount

153 Providing & erecting 415 V MCB Four Pole for Motor 4.00 Nos. 811.03

& Inductive Load (C Curve) having 10KA breaking

capacity & confirms to IS :8828 in existing box having

following capacity (c)63 Amp. Cat-III

154 Sheets steel powder coated enclosure suitable for 5.00 Nos. 176.75

incorporating One/Two nos. MCB.

155 Providing and erecting Sheet Steel powder coated 2.00 Nos. 355.52

MCB distribution board - flush / surface mounted

fitted with busbar, neutral link, earth bar and DIN

rail, Conforms to IS 8623-1 & 3, IEC 61439-1 &

without MCB to house appropriate nos. of MCBs.(The

DBs should be used of same company of MCB to be

used) suitable for (A) single phase incoming and

horizontal single phase outgoing (a) single door (IP-

156 Providing and erecting Sheet Steel powder coated 2.00 Nos. 2339.16

MCB distribution board - flush / surface mounted

fitted with busbar, neutral link, earth bar and DIN

rail, Conforms to IS 8623-1 & 3, IEC 61439-1 &

without MCB to house appropriate nos. of MCBs.(The

DBs should be used of same company of MCB to be

used) suitable for (B) three phase incoming and

single phase horizontal type outgoing Per phase

isolation type (PPI) (b) sheet steel double door (i)4

157 providing and erecting Approved make RCCBs 8.00 Nos. 2458.34

conforming to IS: 12640 and having sensitivity of

mA and Short Circuit withstand capacity of 10 KA

and suitable for operation on single phase

V,50Hz. having characteristic of quick action &

tripping with all advance feature & do not

incorporate any electronic component. for following

Max. rating erected as directed (ii) 40Amps. DP Cat.

158 Providing and erecting Annealed bare Copper wire 5.00 Kg. 794.87

159 Providing and erecting Pipe type earthing having 150 7.00 Nos 368.65

cms.long and 2.5 cms. dia. galvanised iron pipe with

coupling and buch buried in specially prepared earth

pit complete with necessary 8 SWG earth wire.

160 For using salt and charcoal / coke as required for 7.00 Nos. 171.70

pipe type earthing.

Item Description of Item Quantity Unit Rate In Amount

161 Supplying & erecting earth pit of minimum bore 1.00 Nos. 4591.46

dia.150mm size approved make Earthing Electrode

consisting Pipe-in-Pipe Technology as per IS 3043-

1987 made of corrosion free hot dipped G.I.Pipes

having Outer pipe dia of 50mm having 80-200

Micron galvanising, Inner pipe dia of 25 mm having

200-250 Micron galvanising, connection terminal dia

of 12mm with constant ohmic value surrounded by

highly conductive compound with high charge

dissipation suitable for following type of applications

with chamber and heavy duty cover. (A)(approved

make OEM has to submit test certificate including

value of earth resistance of installation duly stamped

and signed by agency and officer Incharge has to

ensure the value of earthing resistane mentioned in

test Certificate) & having back filling compound of

(B) Inner chemical (CCM Compound)- Resistivity:-

0.2 ohm / meter testing as per IEC 62561-2017,

Voltage drop:- < 1 volt at no load & dry form, Sulphar

content:- <2%(C) Back fill Compound :- Earthing

compound should be capable to retain moisture for

long time Necessary test report must be submitted

by Agency. (a) For Electrical Installation up to 440V

Length of pipe - 1 Mtr

Back filling compound - 1 Nos Bag of 15 Kg.

162 Providing and erecting FRLS-XLPE(IS:7098)(I)-88 ISI 410.00 Mtr. 112.11

armoured cable Aluminium conductor for 1.1 kV. to

be laid on wall with necessary clamps or in existing

trench / pipe of following size of cables. (B) 2 core

163 Making trench in soft soil of suitable width of 90 cm 220.00 Mtr. 55.55

deep for laying cable or locating the fault all over the

run and back filling the same and making the surface

as normal ground.

164 Providing & laying approved make Double walled 220.00 Mtr. 62.62

corrugated pipes (DWC) of polyethylene (conforming

to IS 14930 II) with necessary connecting

accessories of same material at required depth in

existing trench for laying of cable. below ground /

road surface for enclosing cable (A)50 mm outer dia

165 Providing and, fixing heavy duty flange type brass 28.00 Nos. 38.38

cable gland with rubber ring for PVC insulated

armoured cable complete with out going tails,

insulating tape etc for following size of cables. (B)

to 4 core 6 Sq. mm

166 Solder less crimping type Aluminium lugs 112.00 Nos. 6.06

conforming to IS suitable for cable of following size

evenly crimped with high pressure tool & connected

to switchgear terminals with brass/ cadmium plated

nut bolts in an approved manner. (A) 1.5/ 2.5/4/6

Item Description of Item Quantity Unit Rate In Amount

167 Providing and erecting Approved make Ceiling fan 7.00 Nos. 1596.81

with double ball bearing ISI mark with condenser

A.C. 230V.50 Hz.1200 mm. sweep complete, canopy

erected on existing hook or clamp with earthing.

[Make shall be approved by Engineer in charge]

168 Supplying and erecting 19 / 20 mm. nominal bore 7.00 Mtr. 108.07

Medium Class M.S. Pipe down rod erected duly

painted for fan complete with proper insulation

without leakage and earthing.

169 Supplying & erecting fan hook box of 10 mm M.S. 7.00 Mtr. 108.07

round bar bounded to the RCC bars up to 50mm

length each side and pierced through a 16 Gauge

M.S. box / Heavy Duty PVC box complete erected

concealed in Ceiling with necessary finishing.

170 Supplying & erecting single phase approved make 3.00 Nos. 2054.34

industrial exhaust fan suitable for medium duty ring

mounted low noise operation suitable for medium

duty having following dia size and maximum speed

in RPM [A] 300-305 mm dia 900 RPM Cat.II

171 Supplying and erecting approved make Octagonal 7.00 Nos. 7561.87

pole made from HR sheet steel. The pole should be

made as per IS. and shall be coated with hot dip

galvanizing as per IS 2629/2633/4759, suitable

suspend local wind speed with integral Junction box

consist of terminal plate of min 6mm Hylam sheet,

standard profile 35mmX7.5mm Din-Rail for MCB

Mounting, stud type terminal and arrangement for

cable termination to be erected With Suitable

foundation (Included) as per details given by

manufacturer considering site requirement. (C)

Mtr. Long 70 mm Top X 130 mm bottom dia, 3 mm

thickness with 200mmX200mmX12mm base plate, 4-

M16 Bolts and 600mm long with necessary G.I. J

Bolts .Approx Pole weight 46 kg

172 Supplying & erecting approved make SMC press 7.00 Nos. 476.72

moulded composite FRP. loop-in, loop-out approx.

2mm thick box complete with Bakelite connector

strip 5way (3P+N+E), DIN rail for mounting mob &

hinged doors as per requirement having locking

arrangements with mounting clamp with nuts, bolts

& washers suitable for erection on pole with cable

clamps& earth bolt of following size of box.

(C)150mm x 125mm x 100mm [deep]

Item Description of Item Quantity Unit Rate In Amount

173 Supplying and erecting Street light pole bracket 7.00 Nos. 491.87

comprising main B Class GI pipe of 4.2 cm/require

outside dia. complete with suitable B Class G.I. sleeve

tubing of approx. 45cms.length and suitable for

76.5mm/80mm/require size of pole top having nuts

and bolts for fixing the brackets and having spread of

0.5 mtr. Length with 110 deg.with vertical plane and

suitable welded stiffener reducer and nipple with

check nut complete painted with one coat.of Red

oxide / PU base primer and two coats of Aluminium /

PU paint. paint with following nos of arms. A] Single

Arm bracket 0.5 Mtr

174 Supplying and erecting B class galvanised iron pipe 5.00 Nos. 343.40

32 mm outside dia 45 cm long duly welded on 20 cm

x 20 cm x 3 mm thick M.S. base plate, erected on wall

or corner for mounting street light luminaire with

necessary hardware materials duly painted.

175 Supplying & erecting IP 55 grade following size 1.00 Nos. 3595.60

section pillar fabricated from joint less M.S. Sheet

with angle iron legs made from jointless M.S. Angle

with cable clamps to be buried in ground to have

appropriate erection to work uniform until erected

with cement concrete foundation and 45 cm high

bricks work finishing with plaster etc. hinged double

door internally supported on both side, with internal

and outside looking arrangement with look and keys

in duplicate 35 x 35 x 5 mm M.S. Angle of Two Nos.

one is welded and other with nut and bolt for

erecting Bakelite sheet. Painting the Section Pillar

inside and out side with three tank powder coated

paint. section pillar roof should be without joint with

water leakage proof & tested as per IP 55 test &

followed by IS 2147 of 1962 (B) 75 X 60 X 45 cm

section pillar fabricated from 16 Gauge MS Sheet

with angle iron legs 45 cm long made from 35 X 35 X

5 mm thick MS angle.

176 Supplying & erecting approved make Digital time 1.00 Nos. 3168.37

switch having lithium cell 6 years operative and

operate battery backup 1 channel day clock with

memory programme, suitable to operate on 240V +

5%, 16A with, floating contacts Minimum switching

setup time 1 minimum & LCD display. Also

comprised permanent ON/OFF switching.

Programming switches & housed in fire proof

thermoplastic enclosure & transparent cover erected

as required with necessary connection erected as

177 Supplying & erecting power contactor, AC3 duty for 1.00 Nos. 1883.65

time switch complete erected as per direction Cat III

(B) 2 pole 250V 32 Amp.

Item Description of Item Quantity Unit Rate In Amount

I/We am/are willing to carry out the work at………………….% above/below percent(Should be written in

figures and words) of the estimated rate mentioned above. Amount of my /our

Tender works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct………% below Add………% Above

In words In words

The Contractor shall exhibit a board with detailed specification and details of work as directed by the

1 Engineer-In-Charge for which no extra payment shall be made.

2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3 Income tax TDS will be deducted at a source while making payments of bills

In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.:

PRC-10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C.

4 items where there is a change as per actual mix design the cost of difference of cement consumption

have been deducted from the rate of original item at the rate of input rate i.e. 6176/- per mt.

mentioned in all the tender.

Deputy Executive Engineer Executive Engineer

Navsari ( R & B ) Sub Division Navsari ( R & B ) Division

Navsari Navsari