Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹15.0 Cr
EMD Value
₹15.0 L
Closing Date
4 Dec 2026, 6:00 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Superintending Engineer, Project Implementation Unit, Health & Family Welfare Department.
New construction of Staff Quarter For E Type 10 Unit (P+5), D type 4 Unit (P+ 2) & C Type 24 Unit (P+6) at SDH Vansda Ta.Vansda District Navsari.
364421
2026-27/117/03
Open
Civil Works - Buildings
Works
Navsari
1 document required · 1 mandatory
₹18,000
PIU-General Fund A/c 11-114
₹15.0 L
7 Nov 2026
7 Nov 2026
7 Nov 2026
4 Dec 2026
7 Nov 2026
90 days
1 1392.88 Excavation for foundation up to 1.5 m depth including sorting out and stacking of useful materials and disposing off the 153.33 Rupees One Hundred Fifty Cmt
excavated stuff upto 50 Meter lead.(A) Dance & hard soil Three And Paise Thirty
2 1165.40 Excavation for foundation upto 1.5 m depth including sorting out and stacking of useful materials and disposing off the 261.81 Rupees Two Hundred Sixty Cmt
excavated stuff upto 50 Meter lead.(C) Hard murrum One And Paise Eighty One
3 1165.40 Excavation for foundation for depth from 1.5 m to 3.0 m including sorting out and stacking of useful materials and disposing 280.38 Rupees Two Hundred Cmt
off the excavated stuff upto 50 Meter lead.(C ) Hard murrum Eighty And Paise Thirty
4 1165.40 Excavation for foundation for depth from 1.5 m to 3.0 m including sorting out and stacking of useful materials and disposing 292.87 Rupees Two Hundred Cmt
off the excavated stuff upto 50 Meter lead. (D) Soft rock not requiring Blasting Ninety Two And Paise
Eighty Seven Only
5 433.39 Providing and laying rubble for appron (each stone weighting not less than 40Kg.) including and packing and filing in the 1,067.08 Rupees One Thousand Cmt
interestices with quarry-spalls. Sixty Seven And Paise Eight
6 317.50 Providing and laying cement concrete 1:2:4 (1-Cement : 2- Coarse sand : 4- graded stone aggregates 20 mm nominal size) 3,676.90 Rupees Three Thousand Cmt
and curing complete excluding cost of formwork in (A) Foundation and Plinth Six Hundred Seventy Six
And Paise Ninety Only
7 128.49 Providing and laying cement concrete 1:3:6 (1 Cement :3-coarse sand :6-hand broken stone aggregates 40 mmnominal size) 3,080.90 Rupees Three Thousand Cmt
and curing complete excluding cost of formwork in (A)Foundation and Plinth Eighty And Paise Ninety
8 1214.48 Providing & laying controlled cement concrete M - 300 RCC work with curing etc. complete including the cost of form work 4,973.24 Rupees Four Thousand Cmt
but excluding the cost of reinforcement for R.C.C. Work in Raft /strip /Base foundation with all lead and lift as directed by Nine Hundred Seventy
engineer in charge. Raft /strip /Base foundation Three And Paise Twenty
9 32.13 Providing & laying controlled cement concrete M - 300 RCC work with curing etc. complete including the cost of form work 6,974.05 Rupees Six Thousand Nine Cmt
but excluding the cost of reinforcement for R.C.C. Work in column up to plinth level with all lead and lift as directed by Hundred Seventy Four And
engineer in charge. R.C.C column up to plinth level Paise Five Only
Total Quantity Description of Item Rate Rate in word Unit Amount
10 3011.55 Filling available excavated earth (excluding rock) in trenches. plinth, sides of foundations etc. in layers not exceeding 20cm. 133.65 Rupees One Hundred Cmt
In depth consolidating each disposited layer by ramming and watering. Thirty Three And Paise
Sixty Five Only
11 83.83 Filling in plinth with sand under floors including watering ramming, consolidating and dressing complete 471.69 Rupees Four Hundred Cmt
Seventy One And Paise
Sixty Nine Only
12 875.76 Filling in foundation and plinth with murrum or selected soil in layers of 20cm. thickness including watering, ramming and 296.29 Rupees Two Hundred Cmt
consolidating etc. complete. Ninety Six And Paise
Twenty Nine Only
13 96.88 Providing and laying controlled cement concrete M:300 RCC and curing complete including the cost of form work but 5,889.41 Rupees Five Thousand Cmt
excluding the reinforcement for reinforced concrete work in tie beam , ground beam with all lead and lift as directed by Eight Hundred Eighty Nine
engineer in charge. R.C.C tie beam , ground beam And Paise Forty One Only
14 65.79 Providing & laying controlled cement concrete M - 250 RCC work with curing etc. complete including the cost of form work 5,196.45 Rupees Five Thousand One Cmt
but excluding the cost of reinforcement for R.C.C. Work in wall at ground floor with all lead and lift as directed by engineer Hundred Ninety Six And
in charge. R.C.C Wall at ground floor Paise Forty Five Only
15 14.60 Providing & laying controlled cement concrete M - 250 RCC work with curing etc. complete including the cost of form work 5,236.98 Rupees Five Thousand Two Cmt
but excluding the cost of reinforcement for R.C.C. Work in wall at 1st floor with all lead and lift as directed by engineer in Hundred Thirty Six And
charge. R.C.C Wall at 1st floor Paise Ninety Eight Only
16 14.58 Providing & laying controlled cement concrete M - 250 RCC work with curing etc. complete including the cost of form work 5,277.51 Rupees Five Thousand Two Cmt
but excluding the cost of reinforcement for R.C.C. Work in wall at 2nd floor with all lead and lift as directed by engineer in Hundred Seventy Seven
charge. R.C.C Wall at 2nd floor And Paise Fifty One Only
17 16.99 Providing & laying controlled cement concrete M - 250 RCC work with curing etc. complete including the cost of form work 5,318.04 Rupees Five Thousand Cmt
but excluding the cost of reinforcement for R.C.C. Work in wall at 3rd floor with all lead and lift as directed by engineer in Three Hundred Eighteen
charge. R.C.C Wall at 3rd floor And Paise Four Only
18 10.69 Providing & laying controlled cement concrete M - 250 RCC work with curing etc. complete including the cost of form work 5,358.58 Rupees Five Thousand Cmt
but excluding the cost of reinforcement for R.C.C. Work in wall at 4th floor with all lead and lift as directed by engineer in Three Hundred Fifty Eight
charge. R.C.C Wall at 4th floor And Paise Fifty Eight Only
19 10.69 Providing & laying controlled cement concrete M - 250 RCC work with curing etc. complete including the cost of form work 5,399.11 Rupees Five Thousand Cmt
but excluding the cost of reinforcement for R.C.C. Work in wall at 5th floor with all lead and lift as directed by engineer in Three Hundred Ninety Nine
charge. R.C.C Wall at 5th floor And Paise Eleven Only
20 12.72 Providing & laying controlled cement concrete M - 250 RCC work with curing etc. complete including the cost of form work 5,439.64 Rupees Five Thousand Cmt
but excluding the cost of reinforcement for R.C.C. Work in wall at 6th floor with all lead and lift as directed by engineer in Four Hundred Thirty Nine
charge. R.C.C Wall at 6th floor And Paise Sixty Four Only
21 12.71 Providing & laying controlled cement concrete M - 250 RCC work with curing etc. complete including the cost of form work 5,480.17 Rupees Five Thousand Cmt
but excluding the cost of reinforcement for R.C.C. Work in wall at stair cabin with all lead and lift as directed by engineer in Four Hundred Eighty And
charge. R.C.C Wall at stair cabin Paise Seventeen Only
22 64.87 Providing & laying controlled cement concrete M - 250 RCC work with curing etc. complete including the cost of form work 7,151.81 Rupees Seven Thousand Cmt
but excluding the cost of reinforcement for R.C.C. Work in column with any lead and lift at ground floor/parking One Hundred Fifty One And
Paise Eighty One Only
Total Quantity Description of Item Rate Rate in word Unit Amount
23 66.36 Providing & laying controlled cement concrete M - 250 RCC work with curing etc. complete including the cost of form work 7,192.34 Rupees Seven Thousand Cmt
but excluding the cost of reinforcement for R.C.C. Work in column with any lead and lift R.C.C. Column at 1st floor One Hundred Ninety Two
And Paise Thirty Four Only
24 66.36 Providing & laying controlled cement concrete M - 250 RCC work with curing etc. complete including the cost of form work 7,232.87 Rupees Seven Thousand Cmt
but excluding the cost of reinforcement for R.C.C. Work in column with any lead and lift R.C.C. Column at 2nd floor Two Hundred Thirty Two
And Paise Eighty Seven Only
25 53.76 Providing & laying controlled cement concrete M - 250 RCC work with curing etc. complete including the cost of form work 7,273.40 Rupees Seven Thousand Cmt
but excluding the cost of reinforcement for R.C.C. Work in column with any lead and lift R.C.C. Column at 3rd floor Two Hundred Seventy
Three And Paise Forty Only
26 51.60 Providing & laying controlled cement concrete M - 250 RCC work with curing etc. complete including the cost of form work 7,313.94 Rupees Seven Thousand Cmt
but excluding the cost of reinforcement for R.C.C. Work in column with any lead and lift R.C.C. Column at 4th floor Three Hundred Thirteen
And Paise Ninety Four Only
27 51.60 Providing & laying controlled cement concrete M - 250 RCC work with curing etc. complete including the cost of form work 7,354.47 Rupees Seven Thousand Cmt
but excluding the cost of reinforcement for R.C.C. Work in column with any lead and lift R.C.C column at 5th floor Three Hundred Fifty Four
And Paise Forty Seven Only
28 34.43 Providing & laying controlled cement concrete M - 250 RCC work with curing etc. complete including the cost of form work 7,395.00 Rupees Seven Thousand Cmt
but excluding the cost of reinforcement for R.C.C. Work in column with any lead and lift R.C.C. Column at 6th floor Three Hundred Ninety Five
29 4.86 Providing & laying controlled cement concrete M - 250 RCC work with curing etc. complete including the cost of form work 7,435.53 Rupees Seven Thousand Cmt
but excluding the cost of reinforcement for R.C.C. Work in column with any lead and lift at stair cabin Four Hundred Thirty Five
And Paise Fifty Three Only
30 15.95 Providing and laying controlled cement concrete M:250 RCC and curing complete including the cost of form work but 4,759.12 Rupees Four Thousand Cmt
excluding the reinforcement for reinforced concrete work in coping/RCC bend with all lead and lift as directed by engineer Seven Hundred Fifty Nine
in charge. R.C.C coping/RCC bend And Paise Twelve Only
31 45.22 Brick work using common burnt clay building bricks having crushing strength not less than 35 kg./Sq.Cm. in foundation and 4,153.07 Rupees Four Thousand Cmt
plinth in Cement Mortar 1:5. (1- Cement : 5 -fine sand)(B) Conventional One Hundred Fifty Three
And Paise Seven Only
32 42.13 Providing and laying autoclave aerated concrete blocks masonry as per drawing (Thickness above 150 to 350 mm) in single 4,597.84 Rupees Four Thousand Cmt
or multiple layers in cement mortar 1:5 (1 cement : 5 fine sand). Crushing strength of aerated concrete block/ bats shall not Five Hundred Ninety Seven
be less than 40 KG/sqcm, minimum density in oven dry condition between 651 to 750 KG/CUM, thermal conductivity shall And Paise Eighty Four Only
not exceed 0.3 W/make, fire resistant 4 hours, in true line level and plumb and cleaning the surface with necessary tool
tackles etc. at all floors, any heights, all depths, any levels (in foundation and superstructure) and all places including curing,
scaffolding, racking / flush jointing etc complete, as per drawing / specification and approved by architect and as directed by
Engineer In charge for all civil, plumbing, electrical & infrastructure works. at Ground floor level
Total Quantity Description of Item Rate Rate in word Unit Amount
33 128.66 Providing and laying autoclave aerated concrete blocks masonry as per drawing (Thickness above 150 to 350 mm) in single 4,639.34 Rupees Four Thousand Six Cmt
or multiple layers in cement mortar 1:5 (1 cement : 5 fine sand). Crushing strength of aerated concrete block/ bats shall not Hundred Thirty Nine And
be less than 40 KG/sqcm, minimum density in oven dry condition between 651 to 750 KG/CUM, thermal conductivity shall Paise Thirty Four Only
not exceed 0.3 W/m.k, fire resistant 4 hours, in true line level and plumb and cleaning the surface with necessary tool
tackles etc. at all floors, any heights, all depths, any levels (in foundation and superstructure) and all places including curing,
scaffolding, racking / flush jointing etc complete, as per drawing / specification and approved by architect and as directed by
Engineer In charge for all civil, plumbing, electrical & infrastructure works. at 1st floor level
34 128.64 Providing and laying autoclave aerated concrete blocks masonry as per drawing (Thickness above 150 to 350 mm) in single 4,680.85 Rupees Four Thousand Six Cmt
or multiple layers in cement mortar 1:5 (1 cement : 5 fine sand). Crushing strength of aerated concrete block/ bats shall not Hundred Eighty And Paise
be less than 40 KG/sqcm, minimum density in oven dry condition between 651 to 750 KG/CUM, thermal conductivity shall Eighty Four Only
not exceed 0.3 W/m.k, fire resistant 4 hours, in true line level and plumb and cleaning the surface with necessary tool
tackles etc. at all floors, any heights, all depths, any levels (in foundation and superstructure) and all places including curing,
scaffolding, racking / flush jointing etc complete, as per drawing / specification and approved by architect and as directed by
Engineer In charge for all civil, plumbing, electrical & infrastructure works. at 2nd floor level
35 121.68 Providing and laying autoclave aerated concrete blocks masonry as per drawing (Thickness above 150 to 350 mm) in single 4,722.35 Rupees Four Thousand Cmt
or multiple layers in cement mortar 1:5 (1 cement : 5 fine sand). Crushing strength of aerated concrete block/ bats shall not Seven Hundred Twenty
be less than 40 KG/sqcm, minimum density in oven dry condition between 651 to 750 KG/CUM, thermal conductivity shall Two And Paise Thirty Five
not exceed 0.3 W/m.k, fire resistant 4 hours, in true line level and plumb and cleaning the surface with necessary tool Only
tackles etc. at all floors, any heights, all depths, any levels (in foundation and superstructure) and all places including curing,
scaffolding, racking / flush jointing etc complete, as per drawing / specification and approved by architect and as directed by
Engineer In charge for all civil, plumbing, electrical & infrastructure works. at 3rd floor level
36 95.74 Providing and laying autoclave aerated concrete blocks masonry as per drawing (Thickness above 150 to 350 mm) in single 4,763.85 Rupees Four Thousand Cmt
or multiple layers in cement mortar 1:5 (1 cement : 5 fine sand). Crushing strength of aerated concrete block/ bats shall not Seven Hundred Sixty Three
be less than 40 KG/sqcm, minimum density in oven dry condition between 651 to 750 KG/CUM, thermal conductivity shall And Paise Eighty Five Only
not exceed 0.3 W/m.k, fire resistant 4 hours, in true line level and plumb and cleaning the surface with necessary tool
tackles etc. at all floors, any heights, all depths, any levels (in foundation and superstructure) and all places including curing,
scaffolding, racking / flush jointing etc complete, as per drawing / specification and approved by architect and as directed by
Engineer In charge for all civil, plumbing, electrical & infrastructure works. at 4th floor level
37 95.74 Providing and laying autoclave aerated concrete blocks masonry as per drawing (Thickness above 150 to 350 mm) in single 4,805.35 Rupees Four Thousand Cmt
or multiple layers in cement mortar 1:5 (1 cement : 5 fine sand). Crushing strength of aerated concrete block/ bats shall not Eight Hundred Five And
be less than 40 KG/sqcm, minimum density in oven dry condition between 651 to 750 KG/CUM, thermal conductivity shall Paise Thirty Five Only
not exceed 0.3 W/m.k, fire resistant 4 hours, in true line level and plumb and cleaning the surface with necessary tool
tackles etc. at all floors, any heights, all depths, any levels (in foundation and superstructure) and all places including curing,
scaffolding, racking / flush jointing etc complete, as per drawing / specification and approved by architect and as directed by
Engineer In charge for all civil, plumbing, electrical & infrastructure works. at 5th floor level
Total Quantity Description of Item Rate Rate in word Unit Amount
38 82.86 Providing and laying autoclave aerated concrete blocks masonry as per drawing (Thickness above 150 to 350 mm) in single 4,846.85 Rupees Four Thousand Cmt
or multiple layers in cement mortar 1:5 (1 cement : 5 fine sand). Crushing strength of aerated concrete block/ bats shall not Eight Hundred Forty Six
be less than 40 KG/sqcm, minimum density in oven dry condition between 651 to 750 KG/CUM, thermal conductivity shall And Paise Eighty Five Only
not exceed 0.3 W/m.k, fire resistant 4 hours, in true line level and plumb and cleaning the surface with necessary tool
tackles etc. at all floors, any heights, all depths, any levels (in foundation and superstructure) and all places including curing,
scaffolding, racking / flush jointing etc complete, as per drawing / specification and approved by architect and as directed by
Engineer In charge for all civil, plumbing, electrical & infrastructure works. at 6th floor level
39 37.52 Providing and laying autoclave aerated concrete blocks masonry as per drawing (Thickness above 150 to 350 mm) in single 4,888.35 Rupees Four Thousand Cmt
or multiple layers in cement mortar 1:5 (1 cement : 5 fine sand). Crushing strength of aerated concrete block/ bats shall not Eight Hundred Eighty Eight
be less than 40 KG/sqcm, minimum density in oven dry condition between 651 to 750 KG/CUM, thermal conductivity shall And Paise Thirty Five Only
not exceed 0.3 W/m.k, fire resistant 4 hours, in true line level and plumb and cleaning the surface with necessary tool
tackles etc. at all floors, any heights, all depths, any levels (in foundation and superstructure) and all places including curing,
scaffolding, racking / flush jointing etc complete, as per drawing / specification and approved by architect and as directed by
Engineer In charge for all civil, plumbing, electrical & infrastructure works. at stair cabin level
40 372.66 Half brick masonry in common brunt clay building bricks having crushing strength not less than 35 kg/Sq.cm in cement 669.34 Rupees Six Hundred Sixty Smt
mortar 1 : 4 ( 1 cement : 4 coarse sand ) in foundation and plinth. extra for half brick masonry in super structure at 1st floor. Nine And Paise Thirty Four
(B) conventional with all lead and lift as directed by engineer in charge. at 1st floor. Only
41 372.64 Half brick masonry in common brunt clay building bricks having crushing strength not less than 35 kg/Sq.cm in cement 778.34 Rupees Seven Hundred Smt
mortar 1 : 4 ( 1 cement : 4 coarse sand ) in foundation and plinth. extra for half brick masonry in super structure at 2nd Seventy Eight And Paise
floor. (B) conventional with all lead and lift as directed by engineer in charge. at 2nd floor. Thirty Four Only
42 200.31 Half brick masonry in common brunt clay building bricks having crushing strength not less than 35 kg/Sq.cm in cement 832.84 Rupees Eight Hundred Smt
mortar 1 : 4 ( 1 cement : 4 coarse sand ) in foundation and plinth. extra for half brick masonry in super structure at 3rd Thirty Two And Paise Eighty
floor. (B) conventional with all lead and lift as directed by engineer in charge. at 3rd floor. Four Only
43 200.31 Half brick masonry in common brunt clay building bricks having crushing strength not less than 35 kg/Sq.cm in cement 887.34 Rupees Eight Hundred Smt
mortar 1 : 4 ( 1 cement : 4 coarse sand ) in foundation and plinth. extra for half brick masonry in super structure at 4th floor. Eighty Seven And Paise
(B) conventional with all lead and lift as directed by engineer in charge. at 4th floor. Thirty Four Only
44 200.31 Half brick masonry in common brunt clay building bricks having crushing strength not less than 35 kg/Sq.cm in cement 941.84 Rupees Nine Hundred Smt
mortar 1 : 4 ( 1 cement : 4 coarse sand ) in foundation and plinth. extra for half brick masonry in super structure at 5th floor. Forty One And Paise Eighty
(B) conventional with all lead and lift as directed by engineer in charge. at 5th floor. Four Only
45 141.79 Half brick masonry in common brunt clay building bricks having crushing strength not less than 35 kg/Sq.cm in cement 996.33 Rupees Nine Hundred Smt
mortar 1 : 4 ( 1 cement : 4 coarse sand ) in foundation and plinth. extra for half brick masonry in super structure at 6th floor. Ninety Six And Paise Thirty
(B) conventional with all lead and lift as directed by engineer in charge. at 6th floor. Three Only
Total Quantity Description of Item Rate Rate in word Unit Amount
46 5.72 Providing and laying controlled cement concrete M:200 RCC and curing complete including the cost of form work but 7,736.60 Rupees Seven Thousand Cmt
excluding the cost of reinforcement for reinforced concrete work in Lintel /sill Bend at Basement level and ground floor Seven Hundred Thirty Six
level with all lead and lift as directed by engineer in charge. R.C.C Lintel / Sill Bend at ground floor level And Paise Sixty Only
47 25.54 Providing and laying controlled cement concrete M:200 RCC and curing complete including the cost of form work but 7,777.13 Rupees Seven Thousand Cmt
excluding the cost of reinforcement for reinforced concrete work in Lintel / Sill Bend at 1st floor with all lead and lift as Seven Hundred Seventy
directed by engineer in charge. R.C.C Lintel / Sill Bend at 1st floor Seven And Paise Thirteen
48 24.81 Providing and laying controlled cement concrete M:200 RCC and curing complete including the cost of form work but 7,817.66 Rupees Seven Thousand Cmt
excluding the cost of reinforcement for reinforced concrete work in Lintel / Sill Bend at 2nd floor with all lead and lift as Eight Hundred Seventeen
directed by engineer in charge. R.C.C Lintel / Sill Bend at 2nd floor And Paise Sixty Six Only
49 21.34 Providing and laying controlled cement concrete M:200 RCC and curing complete including the cost of form work but 7,858.19 Rupees Seven Thousand Cmt
excluding the cost of reinforcement for reinforced concrete work in Lintel / Sill Bend at 3rd floor with all lead and lift as Eight Hundred Fifty Eight
directed by engineer in charge. R.C.C Lintel / Sill Bend at 3rd floor And Paise Nineteen Only
50 20.37 Providing and laying controlled cement concrete M:200 RCC and curing complete including the cost of form work but 7,898.73 Rupees Seven Thousand Cmt
excluding the cost of reinforcement for reinforced concrete work in Lintel / Sill Bend at 4th floor with all lead and lift as Eight Hundred Ninety Eight
directed by engineer in charge. R.C.C Lintel / Sill Bend at 4th floor And Paise Seventy Three
51 20.37 Providing and laying controlled cement concrete M:200 RCC and curing complete including the cost of form work but 7,939.26 Rupees Seven Thousand Cmt
excluding the cost of reinforcement for reinforced concrete work in Lintel / Sill Bend at 5th floor with all lead and lift as Nine Hundred Thirty Nine
directed by engineer in charge. R.C.C Lintel / Sill Bend at 5th floor And Paise Twenty Six Only
52 11.66 Providing and laying controlled cement concrete M:200 RCC and curing complete including the cost of form work but 7,979.79 Rupees Seven Thousand Cmt
excluding the cost of reinforcement for reinforced concrete work in Lintel / Sill Bend at 6th floor with all lead and lift as Nine Hundred Seventy Nine
directed by engineer in charge. R.C.C Lintel / Sill Bend at 6th floor And Paise Seventy Nine
53 0.91 Providing and laying controlled cement concrete M:200 RCC and curing complete including the cost of form work but 8,020.32 Rupees Eight Thousand Cmt
excluding the cost of reinforcement for reinforced concrete work in Lintel / Sill Bend at stair cabin with all lead and lift as Twenty And Paise Thirty
directed by engineer in charge. R.C.C Lintel / Sill Bend at stair cabin Two Only
54 86.93 Providing and laying controlled cement concrete M:250 RCC and curing complete including the cost of form work but 6,367.04 Rupees Six Thousand Cmt
excluding the reinforcement for reinforced concrete work in Slab level beam with all lead and lift as directed by engineer Three Hundred Sixty Seven
incharge. at ground floor And Paise Four Only
55 107.88 Providing and laying controlled cement concrete M:250 RCC and curing complete including the cost of form work but 6,407.57 Rupees Six Thousand Four Cmt
excluding the reinforcement for reinforced concrete work in Slab level beam with all lead and lift as directed by engineer Hundred Seven And Paise
incharge.at 1st floor Fifty Seven Only
56 105.87 Providing and laying controlled cement concrete M:250 RCC and curing complete including the cost of form work but 6,448.10 Rupees Six Thousand Four Cmt
excluding the reinforcement for reinforced concrete work in Slab level beam with all lead and lift as directed by engineer Hundred Forty Eight And
incharge. at 2nd floor Paise Ten Only
57 78.44 Providing and laying controlled cement concrete M:250 RCC and curing complete including the cost of form work but 6,488.63 Rupees Six Thousand Four Cmt
excluding the reinforcement for reinforced concrete work in Slab level beam with all lead and lift as directed by engineer Hundred Eighty Eight And
incharge.at 3rd floor Paise Sixty Three Only
Total Quantity Description of Item Rate Rate in word Unit Amount
58 74.10 Providing and laying controlled cement concrete M:250 RCC and curing complete including the cost of form work but 6,529.17 Rupees Six Thousand Five Cmt
excluding the reinforcement for reinforced concrete work in Slab level beam with all lead and lift as directed by engineer Hundred Twenty Nine And
incharge. R.C.C Slab level beam at 4th floor Paise Seventeen Only
59 74.10 Providing and laying controlled cement concrete M:250 RCC and curing complete including the cost of form work but 6,569.70 Rupees Six Thousand Five Cmt
excluding the reinforcement for reinforced concrete work in Slab level beam with all lead and lift as directed by engineer Hundred Sixty Nine And
incharge. R.C.C Slab level beam at 5th floor Paise Seventy Only
60 44.00 Providing and laying controlled cement concrete M:250 RCC and curing complete including the cost of form work but 6,610.23 Rupees Six Thousand Six Cmt
excluding the reinforcement for reinforced concrete work in Slab level beam with all lead and lift as directed by engineer Hundred Ten And Paise
incharge. R.C.C Slab level beam at 6th floor Twenty Three Only
61 5.70 Providing and laying controlled cement concrete M:250 RCC and curing complete including the cost of form work but 6,650.76 Rupees Six Thousand Six Cmt
excluding the reinforcement for reinforced concrete work in Slab level beam with all lead and lift as directed by engineer Hundred Fifty And Paise
incharge. R.C.C Slab level beam at Stair cabin floor Seventy Six Only
62 160.04 Providing and laying controlled cement concrete M:250 RCC and curing complete including the cost of form work but 6,416.53 Rupees Six Thousand Four Cmt
excluding the reinforcement for reinforced concrete work in Slab with all lead and lift as directed by engineer incharge. At Hundred Sixteen And Paise
ground floor Fifty Three Only
63 144.77 Providing and laying controlled cement concrete M:250 RCC and curing complete including the cost of form work but 6,457.06 Rupees Six Thousand Four Cmt
excluding the reinforcement for reinforced concrete work in Slab with all lead and lift as directed by engineer incharge. At Hundred Fifty Seven And
1st Floor Paise Six Only
64 141.77 Providing and laying controlled cement concrete M:250 RCC and curing complete including the cost of form work but 6,497.59 Rupees Six Thousand Four Cmt
excluding the reinforcement for reinforced concrete work in Slab with all lead and lift as directed by engineer incharge. At Hundred Ninety Seven And
2nd floor Paise Fifty Nine Only
65 113.44 Providing and laying controlled cement concrete M:250 RCC and curing complete including the cost of form work but 6,538.12 Rupees Six Thousand Five Cmt
excluding the reinforcement for reinforced concrete work in Slab with all lead and lift as directed by engineer incharge. At Hundred Thirty Eight And
3rd floor Paise Twelve Only
66 106.31 Providing and laying controlled cement concrete M:250 RCC and curing complete including the cost of form work but 6,578.66 Rupees Six Thousand Five Cmt
excluding the reinforcement for reinforced concrete work in Slab with all lead and lift as directed by engineer incharge. At Hundred Seventy Eight And
4th floor Paise Sixty Six Only
67 106.31 Providing and laying controlled cement concrete M:250 RCC and curing complete including the cost of form work but 6,619.19 Rupees Six Thousand Six Cmt
excluding the reinforcement for reinforced concrete work in Slab with all lead and lift as directed by engineer incharge. At Hundred Nineteen And
5th floor Paise Nineteen Only
68 61.53 Providing and laying controlled cement concrete M:250 RCC and curing complete including the cost of form work but 6,659.72 Rupees Six Thousand Six Cmt
excluding the reinforcement for reinforced concrete work in Slab with all lead and lift as directed by engineer incharge. At Hundred Fifty Nine And
6th floor Paise Seventy Two Only
69 8.88 Providing and laying controlled cement concrete M:250 RCC and curing complete including the cost of form work but 6,700.25 Rupees Six Thousand Cmt
excluding the reinforcement for reinforced concrete work in Slab with all lead and lift as directed by engineer incharge. At Seven Hundred And Paise
stair cabin Twenty Five Only
70 0.19 Providing and laying controlled cement concrete M: 200 RCC and curing complete including the cost of form work but 6,838.71 Rupees Six Thousand Eight Cmt
excluding the reinforcement for reinforced concrete work in projection /Whether shed Cantilevers up to floor two level Hundred Thirty Eight And
with all lead and lift as directed by engineer incharge. at ground floor Paise Seventy One Only
Total Quantity Description of Item Rate Rate in word Unit Amount
71 2.49 Providing and laying controlled cement concrete M: 200 RCC and curing complete including the cost of form work but 6,879.24 Rupees Six Thousand Eight Cmt
excluding the reinforcement for reinforced concrete work in projection /Whether shed Cantilevers up to floor two level Hundred Seventy Nine And
with all lead and lift as directed by engineer incharge. at 1st floor Paise Twenty Four Only
72 2.04 Providing and laying controlled cement concrete M: 200 RCC and curing complete including the cost of form work but 6,919.77 Rupees Six Thousand Nine Cmt
excluding the reinforcement for reinforced concrete work in projection /Whether shed Cantilevers up to floor two level Hundred Nineteen And
with all lead and lift as directed by engineer incharge at 2nd floor Paise Seventy Seven Only
73 1.28 Providing and laying controlled cement concrete M: 200 RCC and curing complete including the cost of form work but 6,960.30 Rupees Six Thousand Nine Cmt
excluding the reinforcement for reinforced concrete work in projection /Whether shed Cantilevers up to floor two level Hundred Sixty And Paise
with all lead and lift as directed by engineer incharge at 3rd floor Thirty Only
74 1.14 Providing and laying controlled cement concrete M: 200 RCC and curing complete including the cost of form work but 7,000.84 Rupees Seven Thousand Cmt
excluding the reinforcement for reinforced concrete work in projection /Whether shed Cantilevers up to floor two level And Paise Eighty Four Only
with all lead and lift as directed by engineer incharge at 4th floor
75 1.14 Providing and laying controlled cement concrete M: 200 RCC and curing complete including the cost of form work but 7,041.37 Rupees Seven Thousand Cmt
excluding the reinforcement for reinforced concrete work in projection /Whether shed Cantilevers up to floor two level Forty One And Paise Thirty
with all lead and lift as directed by engineer incharge at 5th floor Seven Only
76 0.70 Providing and laying controlled cement concrete M: 200 RCC and curing complete including the cost of form work but 7,081.90 Rupees Seven Thousand Cmt
excluding the reinforcement for reinforced concrete work in projection /Whether shed Cantilevers up to floor two level Eighty One And Paise
with all lead and lift as directed by engineer incharge at 6th floor Ninety Only
77 0.14 Providing and laying controlled cement concrete M: 200 RCC and curing complete including the cost of form work but 7,122.43 Rupees Seven Thousand Cmt
excluding the reinforcement for reinforced concrete work in projection /Whether shed Cantilevers up to floor two level One Hundred Twenty Two
with all lead and lift as directed by engineer incharge at stair cabin And Paise Forty Three Only
78 9.33 Providing and laying controlled cement concrete M: 250 RCC and curing complete including the cost of form work but 7,744.98 Rupees Seven Thousand Cmt
excluding the reinforcement for reinforced concrete work in RCC Staircase at ground floor level with all lead and lift as Seven Hundred Forty Four
directed by engineer in charge. at ground floor level And Paise Ninety Eight Only
79 9.33 Providing and laying controlled cement concrete M: 250 RCC and curing complete including the cost of form work but 7,785.51 Rupees Seven Thousand Cmt
excluding the reinforcement for reinforced concrete work in RCC Staircase at 1st floor level with all lead and lift as Seven Hundred Eighty Five
directed by engineer in charge. at 1st floor level And Paise Fifty One Only
80 9.33 Providing and laying controlled cement concrete M: 250 RCC and curing complete including the cost of form work but 7,826.04 Rupees Seven Thousand Cmt
excluding the reinforcement for reinforced concrete work in RCC Staircase at 2ndfloor level with all lead and lift as Eight Hundred Twenty Six
directed by engineer in charge. at 2ndfloor level And Paise Four Only
81 6.22 Providing and laying controlled cement concrete M: 250 RCC and curing complete including the cost of form work but 7,866.57 Rupees Seven Thousand Cmt
excluding the reinforcement for reinforced concrete work in RCC Staircase at 3rd floor level with all lead and lift as Eight Hundred Sixty Six And
directed by engineer in charge. at 3rd floor level Paise Fifty Seven Only
82 6.22 Providing and laying controlled cement concrete M: 250 RCC and curing complete including the cost of form work but 7,907.11 Rupees Seven Thousand Cmt
excluding the reinforcement for reinforced concrete work in RCC Staircase at 4th floor level with all lead and lift as Nine Hundred Seven And
directed by engineer in charge. at 4th floor level Paise Eleven Only
83 6.22 Providing and laying controlled cement concrete M: 250 RCC and curing complete including the cost of form work but 7,947.64 Rupees Seven Thousand Cmt
excluding the reinforcement for reinforced concrete work in RCC Staircase at 5th floor level with all lead and lift as Nine Hundred Forty Seven
directed by engineer in charge. at 5th floor level And Paise Sixty Four Only
Total Quantity Description of Item Rate Rate in word Unit Amount
84 3.11 Providing and laying controlled cement concrete M: 250 RCC and curing complete including the cost of form work but 7,988.17 Rupees Seven Thousand Cmt
excluding the reinforcement for reinforced concrete work in RCC Staircase at 6th floor level with all lead and lift as Nine Hundred Eighty Eight
directed by engineer in charge. at 6th floor level And Paise Seventeen Only
85 168291.32 Providing TMT Bar FE 500D reinforcement for R.C.C. work including bending, binding and placing in position complete upto 77.29 Rupees Seventy Seven And Kg
floor two level Paise Twenty Nine Only
86 54642.25 Providing TMT Bar FE 500D reinforcement for R.C.C. work including bending, binding and placing in position complete first 78.31 Rupees Seventy Eight And Kg
floor level. Paise Thirty One Only
87 54638.20 Providing TMT Bar FE 500D reinforcement for R.C.C. work including bending, binding and placing in position complete 79.33 Rupees Seventy Nine And Kg
second floor level. Paise Thirty Three Only
88 43411.19 Providing TMT Bar FE 500D reinforcement for R.C.C. work including bending, binding and placing in position complete third 80.35 Rupees Eighty And Paise Kg
floor level. Thirty Five Only
89 40465.28 Providing TMT Bar FE 500D reinforcement for R.C.C. work including bending, binding and placing in position complete fourth 81.37 Rupees Eighty One And Kg
floor level. Paise Thirty Seven Only
90 40465.28 Providing TMT Bar FE 500D reinforcement for R.C.C. work including bending, binding and placing in position complete fifth 82.39 Rupees Eighty Two And Kg
floor level. Paise Thirty Nine Only
91 25217.76 Providing TMT Bar FE 500D reinforcement for R.C.C. work including bending, binding and placing in position complete sixth 83.41 Rupees Eighty Three And Kg
floor level. Paise Forty One Only
92 4833.03 Providing TMT Bar FE 500D reinforcement for R.C.C. work including bending, binding and placing in position complete. At 84.43 Rupees Eighty Four And Kg
Stair cabin level Paise Forty Three Only
93 1293.32 Providing 15 mm thick Mala cement plaster in double coat mala cement plaster on interior brick/concrete work/ AAC block 299.92 Rupees Two Hundred Smt
wall for interior plastering upto floor two level & finished even and smooth : (ii) C M 1:4 ( 1 cement 4 sand) (A) Ground Ninety Nine And Paise
Floor Ninety Two Only
94 3141.46 Providing 15 mm thick Mala cement plaster in double coat mala cement plaster on interior brick/concrete work/ AAC block 327.31 Rupees Three Hundred Smt
wall for interior plastering upto floor two level & finished even and smooth : (ii) C M 1:4 ( 1 cement 4 sand) First Floor Twenty Seven And Paise
Thirty One Only
95 3141.44 Providing 15 mm thick Mala cement plaster in double coat mala cement plaster on interior brick/concrete work/ AAC block 354.70 Rupees Three Hundred Smt
wall for interior plastering upto floor two level & finished even and smooth : (ii) C M 1:4 ( 1 cement 4 sand) 2nd Floor Fifty Four And Paise
96 2865.31 Providing 15 mm thick Mala cement plaster in double coat mala cement plaster on interior brick/concrete work/ AAC block 382.09 Rupees Three Hundred Smt
wall for interior plastering upto floor two level & finished even and smooth : (ii) C M 1:4 ( 1 cement 4 sand) At 3rd Floor Eighty Two And Paise Nine
97 2466.60 Providing 15 mm thick Mala cement plaster in double coat mala cement plaster on interior brick/concrete work/ AAC block 409.48 Rupees Four Hundred Nine Smt
wall for interior plastering upto floor two level & finished even and smooth : (ii) C M 1:4 ( 1 cement 4 sand) At 4th floor level And Paise Forty Eight Only
98 2466.60 Providing 15 mm thick Mala cement plaster in double coat mala cement plaster on interior brick/concrete work/ AAC block 436.88 Rupees Four Hundred Smt
wall for interior plastering upto floor two level & finished even and smooth : (ii) C M 1:4 ( 1 cement 4 sand) at 5th floor level Thirty Six And Paise Eighty
99 1603.23 Providing 15 mm thick Mala cement plaster in double coat mala cement plaster on interior brick/concrete work/ AAC block 464.27 Rupees Four Hundred Sixty Smt
wall for interior plastering upto floor two level & finished even and smooth : (ii) C M 1:4 ( 1 cement 4 sand) At 6th floor level Four And Paise Twenty
Total Quantity Description of Item Rate Rate in word Unit Amount
100 453.24 Providing 15 mm thick Mala cement plaster in double coat mala cement plaster on interior brick/concrete work/ AAC block 491.66 Rupees Four Hundred Smt
wall for interior plastering upto floor two level & finished even and smooth : (ii) C M 1:4 ( 1 cement 4 sand) At Stair cabin Ninety One And Paise Sixty
101 1082.53 Providing 10 mm thick mala cement plaster in single coat on ceiling and soffits of stairs for interior plastering up to floor 155.55 Rupees One Hundred Fifty Smt
two level and finished even and smooth in (ii)Cement mortar 1:4 (1cement :4 sand) mala plastering line , level and plumb to Five And Paise Fifty Five
developed even surface as per instruction of engineer in charge etc complete. with all lead and lift as directed by engineer Only
in charge. At Ground floor level
102 919.41 Providing 10 mm thick mala cement plaster in single coat on ceiling and soffits of stairs for interior plastering up to floor 179.53 Rupees One Hundred Smt
two level and finished even and smooth in (ii)Cement mortar 1:4 (1cement :4 sand) mala plastering line , level and plumb to Seventy Nine And Paise
developed even surface as per instruction of engineer in charge etc complete. with all lead and lift as directed by engineer Fifty Three Only
in charge. At 1st floor level
103 919.41 Providing 10 mm thick mala cement plaster in single coat on ceiling and soffits of stairs for interior plastering up to floor 203.50 Rupees Two Hundred Smt
two level and finished even and smooth in (ii)Cement mortar 1:4 (1cement :4 sand) mala plastering line , level and plumb to Three And Paise Fifty Only
developed even surface as per instruction of engineer in charge etc complete. with all lead and lift as directed by engineer
in charge. At 2nd floor level
104 723.12 Providing 10 mm thick mala cement plaster in single coat on ceiling and soffits of stairs for interior plastering up to floor 227.48 Rupees Two Hundred Smt
two level and finished even and smooth in (ii)Cement mortar 1:4 (1cement :4 sand) mala plastering line , level and plumb to Twenty Seven And Paise
developed even surface as per instruction of engineer in charge etc complete. with all lead and lift as directed by engineer Forty Eight Only
in charge. r At 3rd floor level
105 675.64 Providing 10 mm thick mala cement plaster in single coat on ceiling and soffits of stairs for interior plastering up to floor 251.46 Rupees Two Hundred Fifty Smt
two level and finished even and smooth in (ii)Cement mortar 1:4 (1cement :4 sand) mala plastering line , level and plumb to One And Paise Forty Six
developed even surface as per instruction of engineer in charge etc complete with all lead and lift as directed by engineer Only
in charge. At 4th floor level
106 675.64 Providing 10 mm thick mala cement plaster in single coat on ceiling and soffits of stairs for interior plastering up to floor 275.44 Rupees Two Hundred Smt
two level and finished even and smooth in (ii)Cement mortar 1:4 (1cement :4 sand) mala plastering line , level and plumb to Seventy Five And Paise
developed even surface as per instruction of engineer in charge etc complete. At 5th floor level with all lead and lift as Forty Four Only
directed by engineer in charge. At 5th floor level
107 354.17 Providing 10 mm thick mala cement plaster in single coat on ceiling and soffits of stairs for interior plastering up to floor 299.41 Rupees Two Hundred Smt
two level and finished even and smooth in (ii)Cement mortar 1:4 (1cement :4 sand) mala plastering line , level and plumb to Ninety Nine And Paise
developed even surface as per instruction of engineer in charge etc complete. At 6th floor level with all lead and lift as Forty One Only
directed by engineer incharge.At 6th floor level
108 64.78 Providing 10 mm thick mala cement plaster in single coat on ceiling and soffits of stairs for interior plastering up to floor 323.39 Rupees Three Hundred Smt
two level and finished even and smooth in (ii)Cement mortar 1:4 (1cement :4 sand) mala plastering line , level and plumb to Twenty Three And Paise
developed even surface as per instruction of engineer in charge etc complete. At Stair cabin floor level with all lead and lift Thirty Nine Only
as directed by engineer in charge. At Stair cabin floor level
109 6241.03 Providing and laying average 20 mm. thick Sand faced cement plaster on masonry work/AAC Block / RCC wall upto all height 440.36 Rupees Four Hundred Smt
& all lift above ground level and for all shapes consisting of first coat (backing coat) average 12 mm. thick with CM 1:3 (1 Forty And Paise Thirty Six
cement: 3 coarse sand) rough wired finish and second coat of average 8 mm. thick uniform grained textured by using Only
wooden Gutka in CM 1:1 (1 cement: 1 sand), including scaffolding, hacking to RCC surface, forming grooves, drip moulds,
pattas, curing etc. complete as directed by engineer-in-charge.
Total Quantity Description of Item Rate Rate in word Unit Amount
110 182.73 Providing and applying external finish of average 2 to 2.5mm thick acrylic polymer based texture Heritage surface wall 888.80 Rupees Eight Hundred Smt
textures and pattern with standard tool and applicator as specified by manufacturer on exterior surfaces at all heights Eighty Eight And Paise
including scaffolding to give even shades including thoroughly brushing the surfaces free from mortar droping and other Eighty Only
foreign matter and sand paper smoothed etc. complete as per the manufacture specifications and up to the satisfaction of
Engineer in-charge/ Architect. The rate includes making of grooves, pattas and finishing as directed by Architect/ EIC. Paint
shall be measured and paid in seperate tender item. (Item should be executed by approved applicator only.)
111 492.20 Providing throating or plaster drip and molding to R.C.C. Chhajja. with up to all and any floor with all lead & lift etc 43.22 Rupees Forty Three And Rmt
complete. Paise Twenty Two Only
112 19683.74 Applying two coats of Birla or Asian acrylic lippy (putty) and two coats of primer of approved brand and manufacture on new 40.59 Rupees Forty And Paise Smt
wall surface to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign Fifty Nine Only
matter and sand prepared smooth. with up to all and any floor with all lead & lift etc complete.
113 16113.47 Wall Painting (three coats) with plastic emulation paint of approved brand and manufacture on undecorated wall surface to 122.58 Rupees One Hundred Smt
give an even shade including thoroughly brushing the surface free from mortar droppings and other foreingnmatter and Twenty Two And Paise Fifty
sand papered smooth extra every subsequent coat of wall painting with plastic emulation paint of approved brand. with up Eight Only
to all and any floor with all lead & lift etc complete.
114 3671.27 Ceiling painting (three coats) with plastic emulsion paint of approved brand and manufacture on undecorated wall surface 128.13 Rupees One Hundred Smt
to give an even shade including thoroughly brushing the surface free from mortar droppings and other foreign matter and Twenty Eight And Paise
sand papered smooth. with up to all and any floor with all lead & lift etc complete. Thirteen Only
115 6915.96 Finishing wall with weather proof Apex exterior emulsion paint on wall surface (Three coats) with Primer coat to give an 117.40 Rupees One Hundred Smt
required shape even shade after thoroughly brushing the surface to remove all dirt, and remains of loose powdered Seventeen And Paise Forty
materials with up to all and any floor with all lead & lift etc complete. Only
116 144.09 Providing and laying Vitrified tiles 8 to 10 mm thick , 36''x 36'' in flooring treads of steps and landing laid on abed of 12mm 1,521.73 Rupees One Thousand Five Smt
thick cement mortar 1:3 (1-cement : 3-coarse sand ) finishing with flush pointing in white cement Hundred Twenty One And
Paise Seventy Three Only
117 3366.54 Providing and laying Vitrified tiles 8 to 10 mm thick , 24'' x 24'' in flooring treads of steps and landing laid on a bed of 12mm 1,058.21 Rupees One Thousand Smt
thick cement mortar 1:3 (1-cement : 3-coarse sand ) finishing with flush pointing in white cement Fifty Eight And Paise
Twenty One Only
118 369.77 Providing and laying Vitrified tiles 8 to 10 mm thick , 24'' x 24'' in skrting risers of steps and dedo on 10mm thick cement 1,169.98 Rupees One Thousand One Smt
plaster 1:3 (1-cement : 3-coarse sand) and jointed with white cement slurry Hundred Sixty Nine And
Paise Ninety Eight Only
119 151.75 Providing and laying polished Kota stone slab flooring over 20mm (Average) thick base of cement mortar 1:6 (1-cement : 6- 1,010.92 Rupees One Thousand Ten Smt
coarse sand) or L.M. 1.1.5 (1-Lime putty :1.5 - coarse sand) laid over and jointed with grey cement slurry mixed with And Paise Ninety Two Only
pigment to match the shade of slab including rubbing and polishing etc. complete. (A) 25mm thick
120 28.07 Providing and laying polished kota stone slab 25mm thick in risers of teps,skirting Dedo and pillars laid on 10mm thick 1,089.18 Rupees One Thousand Smt
cement mortar 1:3 (1-Cement : 3 coarse sand) and jointed with gray cement slury mixed with pigment to match the shade of Eighty Nine And Paise
slab including rubbing and polishing etc. complete. Eighteen Only
Total Quantity Description of Item Rate Rate in word Unit Amount
121 461.52 P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm (average) base of cement mortar 1:6 ( 1 cement: 6 coarse sand) 1,432.78 Rupees One Thousand Smt
on new surface or fixing on existing flooring by adhesive material including dismentaling of existing flooring and jointed with Four Hundred Thirty Two
color cement slurry including finised with flush pointing & cleaning the surface etc. complete for antiskit And Paise Seventy Eight
122 3029.37 Providing and laying coloured glazed tiles of the size 300 mm x 200 mm x 8 mm / 300 mm x 450 mm x 8 mm in skirting, 1,477.25 Rupees One Thousand Smt
risers of steps and dedo on 10 mm. thick cement plaster 1:3 (1 cement : 3 coarse sand) & jointed with white cement slurry Four Hundred Seventy
Seven And Paise Twenty
123 67.16 Providing & lying Pavit Exterior paving tilessquare rasso /beige series 300mm x300mm and 10 mm thick In floor tiles with 1,407.94 Rupees One Thousand Smt
first quality only on a bed of 25 mm thick cement mortar 1:6 ( 1 cement : 6 coarse sand finished bed with flush pointing in Four Hundred Seven And
white cement ) pointing in white cement and jointed jointed with matching pigment ,adhesive white cement & other Paise Ninety Four Only
bounding material. Laying of tiles in line and level & camber complete laid as per design , pattern , different shape & colour
combination as per detail design or instruction of architect and as directed by engineer in charge etc complete with up to all
and any floor with all lead & lift etc complete.
124 1111.30 Providing and laying broken chine mosaic flooring for terrace using 12 mm to 20 mm broken pieces of glazed tiles to be laid 765.97 Rupees Seven Hundred Smt
over cement mortar 1:3 to plain or slope and to be tempered to bring mortar creme out upto surface using white cement Sixty Five And Paise Ninety
including rounding off junctions and extending them upto 15 cm along the wall,clearing with water and oxalic acid etc. as Seven Only
125 1096.80 Providing and laying cement concrete flooring 1:2:4(1-cement :2-coarses and : 4- graded stone aggregate 20mm nominal 370.13 Rupees Three Hundred Smt
size) laidinone layerand finished with a floating coat of neat cement. (B) 50mm thick. Seventy And Paise Thirteen
126 680.50 Providing cement vata (10cm. x 10 cm. size) quarter round in cement mortar 1:1 including neat cement finishing, watering 24.28 Rupees Twenty Four And Rmt
etc. complete. Paise Twenty Eight Only
127 341.00 Providing and fixing on wall face un plasticized Rigid PVC 110 mm diameter rain water pipes 10kg/smt conforming to IS : 353.50 Rupees Three Hundred Rmt
13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion,(i) Single Fifty Three And Paise Fifty
socketed pipes of Approved brands only. etc complete up to all floor level with all lead and lift as per instruction of Only
engineer in charge.
128 36000.00 Providing erecting and fixing double coated ISI water tank of required capacity each with all necessary fittings and 3.95 Rupees Three And Paise Ltr
connection etc. complete on terrace Ninety Five Only
129 1556.82 Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer, 3 mm thick water proofing 480.14 Rupees Four Hundred Smt
membrane, black finished reinforced with glass fibre matt consisting of a coat of bitumen primer for bitumen membrane @ Eighty And Paise Fourteen
0.40 litre/sqm by the same membrane manufactured of density at 25°C, 0.87 - 0.89 kg/litre and viscocity 70 - 160 cps. Over Only
the primer coat the layer of membrane shall be laid using butane torch and sealing all joints etc., and preparing the surface
complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and
transverse direction at 23°C as 350/300 N/5 cm. Tear strength in longitudinal and transverse direction as 60/80N. Softening
point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D -
The laying of membrane shall be got done through the authorized applicator of the manufacturer of membrane 3 mm thick
as directed by engineer in charge
130 138.46 Providing Filling in Sunk Portion with cinder of best approved quality including watering ,ramming consolidation and 360.57 Rupees Three Hundred Cmt
dressing etc. complete as directed in toilet and bath sunken area at all floor up to all lead and lift. Sixty And Paise Fifty Seven
Total Quantity Description of Item Rate Rate in word Unit Amount
131 906.35 Providing and fixing of minimum 16 mm thick telephonic Black Granite stone slab for jambs of doors and window . Black 2,667.41 Rupees Two Thousand Six Smt
Granite should be spotless ,without any crack , vain or other damages joined with grey cement slurry and matching Hundred Sixty Seven And
pigment in vertical and horizontal member , including rubbing and polishing and full round edge molding on both the sides( Paise Forty One Only
edge), Mirror polishing curing of the Black Granite stone as per detail design and instruction. The door frame should have
sandwich type Jambs stone fitting to accommodate fixing of door where required, the fixing of jambs with necessary binding
wire tiles piece, adhesive, clamp, fastener, white cement and matching pigment other consumable, molding and polishing
machinery other tools, tackles required to complete the item and where two member vertical and horizontal meet it should
cut 45 degree angle etc up to all floor with all lead & lift etc complete. The Black Granite stone size and quality should be as
per sample approved by architect and Engineer in charge.
132 128.74 Providing & laying sandwich platform comprising of a) Sandwich of 18 mm thick single side polish Granite of approved size, 6,684.18 Rupees Six Thousand Six Smt
shade and sample on top and 30 mm thick polished kota in bottom with 25mm thick cement mortar (1:4) in between b) At Hundred Eighty Four And
centre vertical sandwich supports of 30 mm thick two kota stone on sides and 20mm CM (1:4) in between and at both end Paise Eighteen Only
walls vertical supports of 18 mm thick double side granite. c) 75 mm raised platform at bottom with kota on top and 50mm
CM (1:4) at bottom, kota stone skirting as per design and approved sample. The rate includes rounding, champhering and
mirror polishing of edges, facias of granite, MS support including necessary bonding adhesive (if required). Rate shall be also
inclusive of making holes & cutouts for SS sink, Oval wash basin, Piller tap / Bib tap etc. as directed by engineer in charge.
(Only plan area shall be measured & paid for). Rate shall be included all kota & granite mentioned in above.
133 36.40 Providing and fixing alluminium Panelled single/double door Partly Glazed & Partly with 12 mm thick both side pre 6,639.55 Rupees Six Thousand Six Smt
laminated Particle Board with Frame having extruded alluminium color anodized section frame main Frame size 101.60 mm Hundred Thirty Nine And
x 44.45 mm x 3.18mm ( of Section No.20011 @ wt. of 2.54 kg/mt )unit providing shutters of bottom & Top rail- 114.30 mm x Paise Fifty Five Only
25.40 mm x 3.18mm (of Section No.19511 @ wt. of 2.65 kg/mt ) Shutter Middle rail = 150 mm x 44.45 x 2.65 mm (of Jindal
Section No.20002 @ wt. of 2.79 kg/mt) Vertical member Shutter style = 85.00 mm x 44 mm x 3.00(of Jindal Section
No.19509 @ wt. of 1.51 kg/mt).with 12mmth. both side pre laminated particle board (novapan) conforming to IS:
Grade 1 Type II in panelling fixed in aluminium door consisting of outer frame shutter as per design with two pairs of
standard handles, two pair of concealed shoot bolts 250mm long and pin type narrow style lock and thumb turn from the
other side, including all fixtures, fastening etc. complete as directed and as per drawing and design. Rate including
hinges/Pivots and making provision for fixing of fitting wherver required including the cost of EPDM rubber/neoprene gasket
required Anodised aluminium (work for all floors)
134 290.31 Providing and fixing threee treack alluminium Sliding shutter Cardinal series CS25 base channel 3 In 1 Model having weight 9,754.58 Rupees Nine Thousand Smt
of 2.226 Kg/mtr 8mm Single Glass Shutter 0.835 kg/mr shutter INTERLOCK Universal Clip 0.393 kg/mtr TRACK RAIL CAP Seven Hundred Fifty Four
0.156 kg/mtr "V" Type with 8 mm thick transparent toughen float glass with powder coated aluminum fittings and fixtures And Paise Fifty Eight Only
handel , lock and othe asscessories . The sliding door should be fix with transparent silicon sealant glass fixing to frame as
per details etc
Total Quantity Description of Item Rate Rate in word Unit Amount
135 193.50 Providing and fixing window having extruded aluminum Colour Powder Coated section frame main outer size 95mm x 24mm 1,591.87 Rupees One Thousand Five Smt
x 1.17mm @ wt.of 0.738 Kg/mt, horizontal Three track member size 92mm x 31.75mm x 1.30mm @ Wt.1.07 Kg/mt, vertical Hundred Ninety One And
member of size 92mm x 31.75mm x 1.50mm ,@ Wt. 1.06 Kg/mt with sliding shutters of horizontal member size 40 Paise Eighty Seven Only
mmx18mm x1.29mm @ wt.of 0.456 Kg/mt, vertical member of size 40mm x 18mm x 1.29 mm @ wt.of 0.456Kg/mt with
mm thick transparent bronze colour tinted float glass with powder coated aluminum fittings and fixtures and transparent
silicon sealant glass fixing to frame as per details etc
136 169.35 Providing and fixing window having extruded aluminum Colour Powder Coated section frame main outer size 63.50 x 38.10 x 1,705.67 Rupees One Thousand Smt
1.95 mm,@ Wt 1.094 Kg / Rmt, horizontal two track member size 61.85 mm x 31.75 mm x 1.20mm @ wt.of 0.695 Kg/mt, Seven Hundred Five And
vertical member of size 61.85 mm x 31.75mm x 1.30 mm @ wt.of 0.0.659 Kg/mt with sliding shutters of horizontal member Paise Sixty Seven Only
size 40mm x18mm x 1.29mm @ wt.of 0.456Kg/mt, vertical member of size 40mm x 18mm x 1.29mm @ wt.of 0.456Kg/mt
with 5mm thick transparent bronze colour tinted float glass with powder coated aluminum fittings and fixtures and
transparent silicon sealant glass fixing to frame as per details etc complete for window
137 21.60 Providing and fixing standared extruded of alluminium section of size 63mm x 38.10mm x 1.2mm , @ Wt. 0.643 Kg/mt with 1,175.56 Rupees One Thousand One Smt
colour Powder Coated alluminium frame for ventilation with 5 mm thick frosted glass as details etc complete for Ventilation Hundred Seventy Five And
Paise Fifty Six Only
138 6.58 Providing wood work in frames of Doors, windows cleare story windows and othersimilar works wrought, framede and fixed 61,023.19 Rupees Sixty One Cmt
in position. (A) Indian Teak Wood Thousand Twenty Three
And Paise Nineteen Only
139 463.05 Provoding and fixing flush door shutters, solid core construction with frame of first class hardwood with cross board and 1,829.74 Rupees One Thousand Smt
face veneer or plywood face panels,including anodised alluminium butt hinges with necessary screws. (B) Non-decorative Eight Hundred Twenty Nine
type and block board core anodised alluminium butt hinges in flush door shutters (2) 35 mm thick And Paise Seventy Four
140 145.13 Providing and fixing FRP frame size 125x65 mm and 35mm thick FRP shutter with wood grain raised panneled design finish 2,019.98 Rupees Two Thousand Smt
shutter having extra reinforcement on sides & edges in Gel coat finish.The core of the shutter & frame is to be filed up with Nineteen And Paise Ninety
injected polyurethene foam done in situ along with embedded wooden pieces for stiffening & also taking hinges & fintures. Eight Only
The whole FRP frame & shutter is to be water proof weather proof, termite proof & resistance to mild acid/alkali. Rates are
to be inclusive of S.S hinges with fastener sleeve & alluminium fixtures & fastenings
141 620.55 Providing and fixing of decorative stainless steel SS 304 Non magnetic best quality Railing/Grill as per approved sample. The 402.99 Rupees Four Hundred Two Kg
SS304 Railing/Grill shall be fix on the edge or periphery of staircase & steps as per detail design and instruction . , The And Paise Ninety Nine Only
Providing and fixing of SS railing including cutting, fabrication ,SS arc welding, grinding , erection , fixing with necessary
machinery tools, tackles, labor and required civil work as per detail design at specific location The item includes buffing,
polishing , assembling of the different unit of SS pipe Railing/Grill and required civil work for the fixing of the SS
Railing/Grill up to all floor in perfect position etc complete as per approved sample as directed by engineer in charge. As
per attached Detail specification.
Total Quantity Description of Item Rate Rate in word Unit Amount
142 6014.37 Providing and fixing M.S. grills of required pattern to wooden frames of windows etc. with M.S. flats at required spacings 110.09 Rupees One Hundred Ten kg
and frame alround, square or round bars with round headed bolts and nuts or by screws (A) Plain Grill. ( as detail design And Paise Nine Only
with two coats of primer & Anticorrosive Coating Paint and color as per instruction of architect etc complete.
143 5235.84 Providing and fixing stainless steel grill as per approved sample made out of ( Grade 304) S.S. rod , s.s. flat and s.s. angle 580.75 Rupees Five Hundred Kg
including cutting ,grinding ,fabrication, welding and finishing as per detail design including mior civil work and fixing in the Eighty And Paise Seventy
wall and jambs incluning all lead and lift as per detail design and directed by engineer in charge. Five Only
144 393.85 Providing and fixing of minimum 16 to 18 mm thick Black Granite stone slab of full length approved quality for flooring 2,364.41 Rupees Two Thousand Smt
over Bed of 20mm ( average) thick base of cement mortar 1:6 (1cement : 6 coarse sand) or lime mortar 1:1.5 laid and Three Hundred Sixty Four
jointed with white cement slurry and matching pigment including rubbing and polishing complete for flooring in steps . The And Paise Forty One Only
fixing of Black Granite stone slab 16 to 18 mm thick at the stair case steps up to all floor in raiser & tread including full
edge molding with nosing to flooring and two anti skid grooves as per instruction of engineer in charge . The fixing of Black
Granite stone as per detail design and instruction, including necessary Mirror polishing , cutting of the stone , adhesive
clamp , fastener , other consumable and labor and fixing up to all floor with all lead & lift etc complete as directed by
engineer in charge.
145 528.00 Providing and fixing minimum 50mm wide sand blasting on Black Granite for stair case steps with necessary tools tacjels , 93.93 Rupees Ninety Three And Rmt
equipment plant as per detail design upto all floor with all lead & lift etc complete as per instruction of engineer in charge. Paise Ninety Three Only
146 1271.76 Carrying out plinth treatment during conctruction by spraying chemical solution for termite control treatment for all type of 81.20 Rupees Eighty One And Smt
structure. The chemical used shall be chloropyriphos(1:19) / Lindane emulsifiable as per latest IS code no 6313 (Part II). Paise Twenty Only
Plinth area in plan at GF shall only be measured and paid. A guarantee bond of 10 years shall be furnished. Rate shall be
inclusive of material required for Anti Termite Treatment and labour for applying.a) Bottom surface and the sides of the
excavation made for masonry/ RCC foundations at the rate of 4 liters/ of surface area (wherever applicable).b) At the rate of
7.5 liter/ Sqm of surface area to the backfill at the depth of 500mm below the original ground level. The soil in the
immediate contact with the vertical surface of RCC column shall be treated.c) As per attached Detail specification.
147 8949.12 Providing and fixing G.I. hexagonal chickenmesh of size 20mm x 20mm of 22 gauge at junction of concrete and brick work or 202.00 Rupees Two Hundred Two Smt
between different materials after making "V" grove between two different material surface and filled with rich cement Only
mortar and @ 100mm on each side of surfaces including necessary "U" nails / screws / washers with cleats for fixing,
overlaps, scaffolding at all floors / all levels / all heights / all shapes etc. complete as per drawing / specifications and
direction of Engineer-in-charge. For civil, plumbing, electrical & infrastructure works.
148 151.55 Providing & laying Controlled cement concrete M 250 grade in Trimix flooring /road for average 150 mm thick wearing coat 4,452.08 Rupees Four Thousand Cmt
in RCC Road without fly ash with lead of 10 Km from plant site including all other taxes octroi, transportation, pumping, Four Hundred Fifty Two
pouring, curing of concrete etc. complete including cost of metallic C channel from work but excluding the cost of And Paise Eight Only
reinforcement in R.C.C. M 250 Trimix flooring work having average 150 mm thick wearing coat in RCC Road laid as detail
design & directed. The item of M 250 grade in Trimix flooring including plant , machinery , tamping vibrating finishing curing
for 21 days , creating expansion joint and filling in joints with bitumen or other material as specified etc complete with all
lead and lift as directed by engineer in charge . (Minimum cement level as per IS 456-2000 shall be adopted for concrete
grade) (C)Concrete Grade M-250
Total Quantity Description of Item Rate Rate in word Unit Amount
149 940.72 Dewatering of TRI MIX M-250 floor concrete by means of vacuum dewatering using floater machine and other necessary 57.57 Rupees Fifty Seven And Smt
equipment , plant and labour etc complete as directed by engineer in chrge Paise Fifty Seven Only
150 248.00 Core Cutting in RCC wall, beam, columns and slab at specific locations up to all height of required size & depth and refilling , 833.25 Rupees Eight Hundred Each
repairing , making it good with RCC M20 etc complete as directed by engineer in charge .Size 100mm to 200mm dia Thirty Three And Paise
(average depth 150 mm to 450 mm) Twenty Five Only
151 48.00 Providing and fixing wsh down water closet (European type, W.C. Pan) with integral P or S trap including jointing the trap 1,336.30 Rupees One Thousand Each
with soil pipe in Cement Mortar 1:1 (1-Cement : 1-fine sand) (Seal and cover to be measured and paid for separately)(A) Three Hundred Thirty Six
vitreous China Pattern :(i) in white colour And Paise Thirty Only
152 38.00 Providing and fixing vitreous china dual purpose closet suitable for use as squatting pan or European type water closet 10,140.79 Rupees Ten Thousand One Each
(Anglo Indian W.C pan) with seat & lid fixed with C.P. brass hinges and rubber buffers, 10 litre low level flushing cistern with Hundred Forty And Paise
fitting and brackets, 40 mm flush bend, 20 mm over flow pipe, with specials of standard make and mosquito proof coupling Seventy Nine Only
of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and
floors wherever required: White vitreous china dual purpose WC pan with white solid plastic seat and lid with white vitreous
china flushing cistern and C.P. flush bend etc complete
153 86.00 Providing and fixing washbasin with single hole for pillar tap with C.I. or M.S. brackets painted white including fixed with 2,562.37 Rupees Two Thousand Five Each
single 15 mm C.P. brass pillar cock , 32 mm dia C.P. brass waste coupling, 40 mm waste pipe, 15 mm dia flexible pipe and 15 Hundred Sixty Two And
mm dia angle valve with all connection .(A) Vitreous China: (ii) Flat Back washbasin 550 mm x 400mm size. (i) In white Paise Thirty Seven Only
154 48.00 Providing and fixing Kitchen sink with C.I. or M.S. brackets, painted white including cutting holes in walls and making good 2,326.66 Rupees Two Thousand Each
the same but excluding fittings. (C) Vitreous China Sink.(i) 600mm x 450mm x 150mm size Three Hundred Twenty Six
And Paise Sixty Six Only
155 86.00 Providing and fixing chromium plated brass half turn flush cock of approved quality inc. fixing in pipeline complete. 25 mm 263.77 Rupees Two Hundred Sixty Each
Dia Three And Paise Seventy
156 124.00 Providing & fixing C.P. Brass screw down bib tap at all floor levels,polished bright etc. comp. (A) 15mm dia. For all floors 186.83 Rupees One Hundred Each
Eighty Six And Paise Eighty
157 124.00 Providing and fixing pillar tap, capstan head, screw down high pressure with screws, shanks and back nuts. (i) 15mm dia 308.73 Rupees Three Hundred Each
Eight And Paise Seventy
158 86.00 Providing and fixing 15mm dia. brass screw down stop tap of approved quality including fixing in pipeline etc. complete as 205.83 Rupees Two Hundred Five Each
directed by Engineer In charge. And Paise Eighty Three Only
159 86.00 Providing and fixing chromium plated, bottle trap with necessary couplings of approved quality for wash basin 295.80 Rupees Two Hundred Each
Ninety Five And Paise
Total Quantity Description of Item Rate Rate in word Unit Amount
160 124.00 Providing and fixing unplasticised P.V.C. connection pipe with PTMT 104.34 Rupees One Hundred Four Each
Nuts, collar and bush of approved quality and colour And Paise Thirty Four Only
161 86.00 Providing and fixing C.P. brass waste for washbasin or sink. (A) 32mmdia 67.91 Rupees Sixty Seven And Each
Paise Ninety One Only
162 86.00 Providing and fixing brass screw down stop tap.(B) 20mm dia. 223.81 Rupees Two Hundred Each
Twenty Three And Paise
Eighty One Only
163 86.00 Providing and fixing 600 mm x 450 mm beveled edge mirror of superior glass mounted on 6mm thick A.C. sheet or plywood 851.13 Rupees Eight Hundred Fifty Each
sheet and fixed to wooden plugs with C.P. brass screws and washers. One And Paise Thirteen
164 86.00 Providing and fixing C.P. brass towel rail comlete with C.P. brass brackets fixed to wooden plugs with C.P. brass scews.(B) 616.42 Rupees Six Hundred Each
600mm x 20mm size Sixteen And Paise Forty
165 86.00 Providing and fixing C.P. brass shower rose with 15mm or 20mm inlet.(A) 100mm dia. 282.16 Rupees Two Hundred Each
Eighty Two And Paise
166 86.00 Providing and fixing 600mm x 120mm glass shelf with C.P. brass bracket and guard rail complete mixed to wooden plug with 534.82 Rupees Five Hundred Each
C.P. brass screws Thirty Four And Paise
Eighty Two Only
167 162.00 Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 100 mm diameter with jali of the following nominal diameter of 585.37 Rupees Five Hundred Each
self cleansing design with C.I scread down or hinged grating including the cost of cutting and making good the walls. Eighty Five And Paise Thirty
168 120.00 Providing and fixing S.W.gully trap with C.I.grating brick masonry chamber and water tight c.i. cover with frame of 300 mm 1,292.19 Rupees One Thousand Two Each
x 300 mm size (inside )with standard weight. (I) square month traps.150 mm x 100 mm size p with all lead and lift etc. Hundred Ninety Two And
Paise Nineteen Only
169 44.00 constructing brick masonry chamber for under ground c.I. Inspection chamber and band with bricks having crushing 2,932.93 Rupees Two Thousand Each
strength not less than 35 kg/cm2 in cm 1:5. c.i. cover with frame (light duty) 455 mm x 610 mm internal dimension, total Nine Hundred Thirty Two
weight of cover with frame to be not lass then 38 kg.weight of cover 23kg and wt. of frame 15 kg ) r.c.c top slab with And Paise Ninety Three
1:2:4 mix (1 cement:2 sand:4 aggregates 20 mm size) foundation concrete 1:5:10 ,in side plaster 15 mm thick with cement Only
mortar 1:3 finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete.) in side dimension
455 mm x 610 mm and 450 mm deep for single pipe.
Total Quantity Description of Item Rate Rate in word Unit Amount
170 22.00 Constructing Manhole with R.C.C. top slab in 1:2:4 mix (1-cement :2-coarse sand : 4-graded stone aggregate 20mm nominal 19,349.63 Rupees Nineteen Each
size) foundation concrete 1:3:6 mix (1-cement : 3- coarse sand :6-Brick bats 40 + 50mm size) inside plastering 15mm thick Thousand Three Hundred
with Cement Mortar 1:5 (1-Cement : 5-coarse sand) finished with a floating coat of neat cement and making channels in Forty Nine And Paise Sixty
cement concrete 1:2:4 mix (1-Cement :2-Coarse sand :4-stone aggregate 20mm nominal size) finished smooth complete Three Only
including curing and festing (i) Inside size 900mm x 1200mm and 1.5M. deep including C.I. cover with frame size 560mm
diameter total weight of cover and frame to be not less than 128 kgs. (Wt. of cover 64 Kg. and Wt. of frame 64 Kg.)(A) With
230mm thick walls of brick msonry using brick having crushing strength not less than 35Kg. / Sq.cm. in Cement Mortar
1:5 (1- Cement: 5-Coarse sand) (2) B type depth 1.50 Metre for 150mm diameter sewer.r
171 12.00 (II) Extra rate for constructing B.B. masonry for every additional depth of 0.1M. GR Part thereof over item No.24.27 (I) for 397.19 Rupees Three Hundred Each
depth from 1.50M. to 2.25M. Ninety Seven And Paise
172 342.00 Providing laying and jointing in true line and level 15mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as 72.65 Rupees Seventy Two And Rmt
approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or shall be Paise Sixty Five Only
concelled as directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive
solvent, including cost of all materials with all lead and lift etc.(A) 15 mm dia.
173 648.00 Providing laying and jointing in true line and level 25mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as 91.84 Rupees Ninety One And Rmt
approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or shall be Paise Eighty Four Only
concelled as directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive
solvent, including cost of all materials with all lead and lift etc. (c) 25 mm dia
174 746.00 Providing laying and jointing in true line and level 40mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as 148.12 Rupees One Hundred Forty Rmt
approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or shall be Eight And Paise Twelve Only
concelled as directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive
solvent, including cost of all materials with all lead and lift etc. (E) 40 mm dia.
175 632.00 providing & fixing to wall ceiling and floor 10 kg/f/cum working pressure polyethylene pipes of the following outside 280.23 Rupees Two Hundred Rmt
diameter ,low density complete with special flange compression type fittings ,wall clamped making good wall ,cling and floor Eighty And Paise Twenty
with all lead and lift etc. - 75 mm dia Three Only
176 486.00 providing & fixing to wall ceiling and floor 10kg/f/cum working pressure polyethylene pipes of the following outside 339.05 Rupees Three Hundred Rmt
diameter ,low density complete with special flange compression type fittings ,wall clamped making good wall ,cling and floor Thirty Nine And Paise Five
with all lead and lift etc. 110 mm dia Only
177 207.00 Providing and fixing to wall ceiling and floor galvanized mild steel tubes (medium grade) of the following nominal bore , 921.68 Rupees Nine Hundred Rmt
tube fitting and clamps including making good the wall ceiling and floor G I pipe80mm up to all floors with all lead and lift as Twenty One And Paise Sixty
directed by engineer in charge Eight Only
178 94.00 Providing and fixing to wall ceiling and floor galvanized mild steel tubes (medium grade) of the following nominal bore , 725.71 Rupees Seven Hundred Rmt
tube fitting and clamps including making good the wall ceiling and floor G I pipe 65 mm up to all floors with all lead and lift Twenty Five And Paise
as directed by engineer in charge Seventy One Only
Total Quantity Description of Item Rate Rate in word Unit Amount
179 146.20 Providing and fixing to wall ceiling and floor galvanized mild steel tubes (medium grade) of the following nominal bore , 426.40 Rupees Four Hundred Rmt
tube fitting and clamps including making good the wall ceiling and floor G I pipe 40mm dia meter up to all floors with all lead Twenty Six And Paise Forty
and lift as directed by engineer in charge Only
180 146.20 Providing and fixing to wall ceiling and floor galvanized mild steel tubes (medium grade) of the following nominal bore , 282.98 Rupees Two Hundred Rmt
tube fitting and clamps including making good the wall ceiling and floor G I pipe 25 mm dia meter up to all floors with all Eighty Two And Paise
lead and lift as directed by engineer in charge Ninety Eight Only
181 8.00 (B) Providing sock pit of 50 Cu.M. Volume including excavating and filling brickbats with dry masonry work at top for 34,572.70 Rupees Thirty Four Each
45cm. height including covering the top with stone including providing vatas in C.M. 1:3 with finishing curing etc. complete Thousand Five Hundred
as directed. Seventy Two And Paise
182 121.60 Providing and laying (two level or slopes) and jointing with stiff mixture of cement mortar in proportion 1:1 ,salt glazed 221.78 Rupees Two Hundred Rmt
stone ware pipe following nominal internal diameter including testing of pipes and joints etc. complete.with all lead and lift Twenty One And Paise
etc. (A) 100 mm dia. Seventy Eight Only
183 121.60 Providing and laying (two level or slopes) and jointing with stiff mixture of cement mortar in proportion 1:1 ,salt glazed 312.76 Rupees Three Hundred Rmt
stone ware pipe following nominal internal diameter including testing of pipes and joints etc .complete with all lead and lift Twelve And Paise Seventy
etc. (B)150 mm dia Six Only
184 8.00 Providing and fixing Gun metal check or non-return fullway wheel valve with all lead and lift etc.(E) 40mm dia. 663.43 Rupees Six Hundred Sixty Each
Three And Paise Forty
185 8.00 Providing and fixing ball cock of approved. quality as directed with all lead and lift etc.(B) Copper metal 50mm 189.84 Rupees One Hundred Each
Eighty Nine And Paise
Eighty Four Only
186 26.00 Providing and fixing in position cowel went to pipes with all lead and lift etc. 100mm 495.91 Rupees Four Hundred Each
Ninety Five And Paise
Ninety One Only
187 3.00 Making connection of galvanized Mild steel distribution branch with galvanized mild steel main 50mm to 80mm nominal 913.09 Rupees Nine Hundred Each
bore by providing and fixing tee including cutting and threading the pipes complete. Thirteen And Paise Nine
188 95.00 Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation 170.36 Rupees One Hundred Rmt
Foundation (NSF) seal for potable water of following dia. nominal bore tube fittings and clamps including making good the Seventy And Paise Thirty
wall, ceiling and floor etc. complete with all lead and lift etc..[A] 15 mm.. Six Only
189 95.00 Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation 253.82 Rupees Two Hundred Fifty Rmt
Foundation (NSF) seal for potable water of following dia. nominal bore tube fittings and clamps including making good the Three And Paise Eighty Two
wall, ceiling and floor etc. complete.with all lead and lift etc. [C] 25 mm. Only
190 165.00 Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation 447.72 Rupees Four Hundred Rmt
Foundation (NSF) seal for potable water of following dia. nominal bore tube fittings and clamps including making good the Forty Seven And Paise
wall, ceiling and floor etc. complete. with all lead and lift etc. [E] 40mm. Seventy Two Only
Total Quantity Description of Item Rate Rate in word Unit Amount
191 76.00 Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation 660.58 Rupees Six Hundred Sixty Rmt
Foundation (NSF) seal for potable water of following dia. nominal bore tube fittings and clamps including making good the And Paise Fifty Eight Only
wall, ceiling and floor etc. complete. with all lead and lift etc. [F] 50 mm.
192 6.00 Construction Septic tank inside dimention of 3.00 m in length &1.50 m in width & 2.25 m depth including excavating any 47,108.20 Rupees Forty Seven Each
type of soil as shown and mentioned in the drawing,providing and laying 0.10 m thick plain cement concrete 1:4:8 ( 1 Thousand One Hundred
cement : 4 coarse sand : 8 graded stone agg.) 40 mm thick IPS flooring at bottom with brick masonary 0.23 m thick walls CM Eight And Paise Twenty
1:6 ( 1 cement : 6 coarse sand ) and intermediate half brick masonary CM 1:4 & RCC Top slabs 0.12 m thick in 1:2:4 (1 Only
cement : 2 coarse sand : 4 graded stone agg) including reinforcement as per design and 15 mm thick cement plaster in CM
1:3 with floating coat of neat cement slurry inside, top and around tank below 15 cm on ground level, Also provide Two nos
SFRC (Steel Fibre Reinforced concrete) cover with frame (Medium duty) 455mm x 610mm internal dimensions etc complete
as per direction of Engineer in charge.
193 411.74 Pro. And fixing single layer waterproof gypsum board 12.5mm thick sections using waterpro of board of size 1220mm x 606.95 Rupees Six Hundred Six Smt
1830mm x 8.0mm suspended by GI suspender channel of size25 mm x 3 mm with inter mediate channelog size 18mm x And Paise Ninety Five Only
40mm x 0.8 mm at 1220mm center to center ceiling section of size 40 mm x 35 mm x 0.55mm at 457mm c/c and perimeter
channel A of size 20mm x 27mm x 30mm x 0.5mm at edges & drops incl.paper tap sand sofit cleat, anchor fastener, scoch
bolt connecting cleat, joining compound top coat on ceiling incl. makingnecy. opening for light fitting, diffuser etc. comp. as
per detail drawing as directed
0.00 Campus Development - Rupees Nil -
194 810.00 Providing and fixing decorative entrance gate made out of cast iron and various mild steel tabular section combination . The 191.90 Rupees One Hundred kg
Ornamental entrance gate should be fixed at compound wall including pattern and die making , cutting, welding, grinding , Ninety One And Paise
fabrication ,fixing in position at compound wall with necessary pedestal , bearing block and other locking arrangement . The Ninety Only
entrance gate should be painted with two coats of priming coat of paint, and two coat of oil paint including minior civil work
etc. complete. The decorative entrance gate shall be as per detail design and instruction of engineer incharge.
195 63.18 Providing and laying Granular sub base 250mm thk. in required layer by providing coarse graded material Grading - I using 1,199.88 Rupees One Thousand One Cm t
B.T. M.C. metal 53 mm to 26.5 mm at 35%, aggregate 26.5 to 4.75 mm at 45% and coarse sand at 20% [1.28 times loose Hundred Ninety Nine And
volume / Cmt. of compacted volume], (CBR more than 30%) as per Table 400-2 of MORT&H gradation including conveying Paise Eighty Eight Only
the material at site of work, mixing and spreading in to grade and camber, watering and consolidating at OMC with vibratory
roller including the cost of materials, labours etc. complete.
196 28.38 Providing and fixing pre-cast Rubber Dye /steel Dye interlocking concrete block 60mm thick with grade of concrete M300 704.07 Rupees Seven Hundred Smt
pnumatic compressed/ vibrated mechanically and as per approved design Confirming to IS 15658 :2006 including 35mm Four And Paise Seven Only
Sand layer for levelling and filling the joint with sand inproper line and level as per guidlines of IRC : SP 63-2018 etc.
197 365.13 Providing and fixing pre-cast concrete kerb stone of gray cement based concrete block 30cm length,30cm height and 15cm 370.68 Rupees Three Hundred Rmt
thick of M250 grade concret as per approved design and including excavation for fixing inproper line and level,filling the Seventy And Paise Sixty
joint with C:M 1:3(1cement:3fine sand) etc complete. Eight Only
Total Quantity Description of Item Rate Rate in word Unit Amount
198 57.00 Mixing and spreading of goods oil and mannure- Mixing earth and sludge or manure in the required proportion specified or 31.28 Rupees Thirty One And Cmt
directed by the Officer-in-charge Paise Twenty Eight Only
199 48.86 Good garden soil Supplying and stackingof good earth at siteincluding royalty and carriage up to 5km complete (earth 441.32 Rupees Four Hundred Cmt
measured in stacks will be reduced by 20% for payment Forty One And Paise Thirty
200 8.14 Cowdungmanure Supplying and stacking of well decayed cattle manure at site including royalty and carriage up to 5k.m. 211.84 Rupees Two Hundred Cmt
lead complete (cattle manure measured in stacks will reduced by 8% for Payment). Eleven And Paise Eighty
201 100.00 Treeplantation: Digging holes in ordinary soil and refilling the same with the excavated earth mixedwith manure or sludge in 37.45 Rupees Thirty Seven And Each
the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20%: 1 part of stacked volume of manure Paise Forty Five Only
after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, ifany,with all lead sand
lifts (cost of manure, sludge or extra good earth if needed to be paid for separately) 2.14.3 Holes 60 cm dia, and 60 cm deep
202 8.14 Preparation of beds for hedging and shrubbery by excavating 60 cm deep and trenching the excavated base to a further 190.74 Rupees One Hundred Cmt
depth of 30cm, refilling the excavated earth after breaking clods andmixing with sludge or manure in the ratio of 8:1 (8 parts Ninety And Paise Seventy
of stacked volume of earth after reduction by 20 %: one part of stacked volume of sludge or manure after reductionby 8%), Four Only
flooding with water, filling with earth if necessary,watering and finally fine dressing, leveling etc. including stacking and
disposal of materials declared unserviceable and surplus earth by spreadingand leveling as directed,with in a lead of 50m,
lift up to 1.5 m complete (cost of sludge, manure or extra earth to be paid for separately
203 162.85 Providing & laying Selection no. 1 doob grass turf with earth 50mm to 60mm thickness of existing ground prepared with 74.89 Rupees Seventy Four And Smt
proper level and ramming with required tools wooden and than rolling the surface with light roller make the surface Paise Eighty Nine Only
smoothen and light watering the same maintenance for 30 days or more till the grass establish properly,as per direction of
officer in charge
204 50.00 Plantation of Trees at site i/c watering and removal of unserveiceable material’s as per direction of officer in charge 6.25Rupees Six And Paise Each
(excluding cast of plant & water) Twenty Five Only
205 50.00 Plantation of Shrubs, at site i/c watering and removal of unserveiceable material’s as per direction of officer in charge 3.12 Rupees Three And Paise Smt
(excluding cast of plant & water) Twelve Only
206 97.50 Providing laying (to level or slopes) and jointing reinforced concrete Light duty non-pressure pipes I.S. class NP2 of the 254.89 Rupees Two Hundred Fifty Rmt
following internal diameter with collars and butt ends prepared for collar joints including testing of joints complete.with all Four And Paise Eighty Nine
lead and lift etc. with all lead and lift etc.(B) 150mm Only
207 50.00 Providing laying (to level or slopes) and jointing reinforced concrete Light duty non-pressure pipes I.S. class NP2 of the 678.01 Rupees Six Hundred Rmt
following internal diameter with collars and butt ends prepared for collar joints including testing of joints complete.with all Seventy Eight And Paise
lead and lift etc. with all lead and lift etc.(C) 300mm One Only
208 2399.24 Earthwork for embankment including breaking clods, dressing with all lead and lift (excluding watering and consolidation)(E) 239.07 Rupees Two Hundred Cmt
From Borrow area within 3.0 Km. lead Thirty Nine And Paise
Total Quantity Description of Item Rate Rate in word Unit Amount
209 1.00 Providing and fixing various Outdoor Gym equipments including 2 no of Air Walker Outdoor Gym Equipment , 2 no of 2,95,425.00 Rupees Two Lakh(s) Ninety Complete
Cross Trainer Outdoor Gym ,1 no of Double Chest Presser , 1 no of Triple Standing Twister ,1 no of Leg Press Outdoor Gym Five Thousand Four set
and 1 no of Single Chest Cum Seating Puller for garden at sonipur lake made out of best quality ISI Marked mild steel Hundred Twenty Five Only
material, with proper bends, welding and Holdfast nut, bolts. Type: Carousel Material: FRP+ steel .The finishing of all
equipment including fabrication ,welding grinding , FRP material should be of approved quality .The various Outdoor Gym
equipments should be elegant , user friendly smooth in operation and finished in powder coating in prescribed color only
The various material used in gym equipment should of best quality material and hard ware up to satisfaction of engineer .
The open gym all equipment should be fix at specific location in to the ground with necessary RCC foundation all necessary
civil work including finishing and painting as directed by engineer in charge & architect
210 1.00 Providing and fixing various play Merry Go Round equipments made out of best quality ISI Marked FRP material, with proper 33,456.25 Rupees Thirty Three Complete
bends, welding and Holdfast nut, bolts.• Type: Carousel Material: FRP+steel Power: 2-7 kw Fixing in to the ground as Thousand Four Hundred set
directed by Architect engg. In charge The welding to smooth paint in prescribed colour quantity material and hard ware up Fifty Six And Paise Twenty
to satisfaction of eng. Five Only
211 1.00 Providing and fixing various play Double Board See Saw equipments made out of best quality ISI Marked FRP material, with 20,482.80 Rupees Twenty Thousand Complete
proper bends, welding and Holdfast nut, bolts. Equipment should be required area: 1.5 mt x 3.5 mt Outer frame should be Four Hundred Eighty Two set
made by 40 mm IDGI pipe connected with 50 mm IDGI Center pipe handle should be made by 20 mm IDGI pipe. Total height And Paise Eighty Only
0.4 mm from ground level. 4 nos. of sheet made by 5 mm thick FRP with proper seating arrangement grouted in CC.
foundation base All Equipments paint by 3 layer of P.U. paint in multi-color or oven baked powder coated whichever is
feasible and possible Fixing in to the ground as directed by Architect engg.
212 1.00 Providing and fixing various play FRP Nursery Tiny Mini Multiplay System equipments made out of best quality ISI Marked 33,936.00 Rupees Thirty Three Complete
FRP material, with proper bends, welding and Holdfast nut, bolts.Eouipment Should required area : 3 meter X 0.6 meter Thousand Nine Hundred set
,Platform height from ground level: 0.9 meter (made by 32 mm N.B) Leg support and ladder: Made from steel frame with 16 Thirty Six Only
G. Thick (RC) sheet, 1.54 mm thick Railing: Made from 20 mm N.B.M.S. Pipe. Slide length: 1.8 mt with 5 mm thickness Slide
chute: 0.5 mt wide Grouted: In C.C. base system 3 layer of P.U. Paint in multi - color or oven baked powder coated
whichever is feasible and possible Fixing in to the ground as directed by Architect engg. In charge
213 1.00 Providing and fixing Yellow and Black FRP Playground Swing Arch, Age Group: 3-12 Years equipments made out of best 44,601.60 Rupees Forty Four Complete
quality ISI Marked Metal,FRP material, with proper bends, welding and Holdfast nut, bolts.Eouipment Should required Area Thousand Six Hundred One set
: 6.0 M X 1.5 M ,Height : 2.4 Meter Swing Seats : 4 Nos Rubber Belt 9mm Thick , Accessories : 4 Nos. Jhula Kada / Gi Chain And Paise Sixty Only
8mm, Load Capacity 100 Kg ,Seating Capacity 04 SEATER layer of P.U. Paint in multi - color or oven baked powder coated
whichever is feasible and possible Fixing in to the ground as directed by Architect engg. In charge
0.00 U.G Tank - Rupees Nil 0 -
214 10.00 Painting Two coats over & including a priming coat on new steel and other metal surfaces with enamel paint, brushing 35.39 Rupees Thirty Five And Smt
interior to give an even shade including cleaning the surface of all dirt, dust and other foreign matter. Paise Thirty Nine Only
215 12.00 Painting Two coats (excluding priming coat) on new steel and other metal surfaces with enamel paint, brushing interior to 89.35 Rupees Eighty Nine And Smt
give an even shade including cleaning the surface of all dirt, dust and other foreign matter. Paise Thirty Five Only
Total Quantity Description of Item Rate Rate in word Unit Amount
216 3.80 Steel work, welded in built up sections framed work including cutting, hoisting, fixing in position and applying a priming coat 5,889.50 Rupees Five Thousand Qntl
of read lead paint. (A)In beams and joists, channels angles Tees, flats, with connecting plates or angle cleats as in main and Eight Hundred Eighty Nine
cross beams. Hip and jack rafters, purlins conneted to common rafters and the like. And Paise Fifty Only
217 58.00 Providing and laying white glazed tiles 6mm thick in flooring treads of steps and landing laid on a bed of 12mm thick cement 940.18 Rupees Nine Hundred Smt
mortar 1:3 (1-cement : 3-coarse sand ) finishing with flush pointing in white cement. Forty And Paise Eighteen
218 198.00 Providing and laying white glazed tiles 6mm thick in skrting risers of steps and dedo on 10mm thick cement plaster 1:3 (1- 1,058.21 Rupees One Thousand Smt
cement : 3-coarse sand) and jointed with white cement slurry Fifty Eight And Paise
Twenty One Only
0.00 Percolation well - Rupees Nil -
219 31.80 Providing & laying weep hole in Aburtments, and returns by using A.C. pipe of 100mm including laying in proper grede and 87.07 Rupees Eighty Seven And Rmt
jointing the completed as per detailed specification Paise Seven Only
220 2.48 Providing and laying rubble for apron (each stone weighting not less than 40Kg.) including and packing and filing in the 1,067.08 Rupees One Thousand Cmt
interstices with quarry-spalls. Sixty Seven And Paise Eight
221 7.43 Providing and laying - Fitter Media 600mm thick directed at the back of abutments, returns and wing walls as per detailed 1,279.96 Rupees One Thousand Two cmt
specifications. Hundred Seventy Nine And
Paise Ninety Six Only
222 160.00 (a) Drilling of pilot bore hole 250/ 300 mm dia(b) Reaming of 250 mm dia pilot bore to 550 mm dia bore hole 847.39 Rupees Eight Hundred Rmt
Forty Seven And Paise
Thirty Nine Only
223 160.00 (b) Reaming of 250 mm dia pilot bore to 550 mm dia bore hole including assembling lowering housing casing, strainer pipes 521.16 Rupees Five Hundred Rmt
with gravel packing, clay balls packing etc. Twenty One And Paise
224 2.00 (c) Cement sealing by means of mud pump without cost of cement. 15,014.66 Rupees Fifteen Thousand Job
Fourteen And Paise Sixty
225 2.00 (d-a) Development of each water bearing zone coming across the depth of tube well by lowering 100 mm dia drop line & 32 25,118.70 Rupees Twenty Five Job
mm dia GI air line with suitable capacity air compressor for min. 06 running hours till the availability of sand free discharge Thousand One Hundred
Eighteen And Paise Seventy
226 2.00 (d-b) Charges of air compressor of 900 cfm / 200 psi capacity for minimum 6 running hours. 06 running hours. 30,916.10 Rupees Thirty Thousand Job
Nine Hundred Sixteen And
227 140.00 (a) Supply of 250 mm dia ERW blank pipes as per IS 4270 of min. 6.89 mm thickness . 1,870.52 Rupees One Thousand Rmt
Eight Hundred Seventy And
Paise Fifty Two Only
Total Quantity Description of Item Rate Rate in word Unit Amount
228 30.00 (b) Supply of 250 mm dia cage type "V" wire wound low carbon galvanised screen pipe. ( i ) Having size of 1.0 mm (Heavy 2,133.12 Rupees Two Thousand One Rmt
Grade) Hundred Thirty Three And
Paise Twelve Only
229 2.00 (c) Supply of misc. bore materials.1. M. S. bore clamps with 03 holes on either side with nuts & bolts of std. make and of 2,440.16 Rupees Two Thousand Pair
suitable size. 900 mm x 100 mm x 16 mm Four Hundred Forty And
Paise Sixteen Only
230 2.00 2. Bore plug having 100 mm height made from 5 mm thick MS plate with 3 holes at equal distance on circumference for nut 705.99 Rupees Seven Hundred No
bolts type locking arrangement with nut bolts & lock nuts of std. make complete. Five And Paise Ninety Nine
231 2.00 3. M. S. bail plug having length of 0.45 mts from medium class pipe as per IS. 907.99 Rupees Nine Hundred No
Seven And Paise Ninety
232 2.00 4. Steel bent plates suitable to 250 mm diapipe of size 200 mm x 150 mm x 6 mm. 97.97 Rupees Ninety Seven And No
Paise Ninety Seven Only
233 2.00 Supply of ISI mark cement 7,128.58 Rupees Seven Thousand Tonn
One Hundred Twenty Eight
And Paise Fifty Eight Only
234 37.37 Supply of well sorted "Sevaliya" gravels of size 4 mm to 6 mm including carting, loading,unloading & stacking at site of work 2,295.73 Rupees Two Thousand Cmt
Two Hundred Ninety Five
And Paise Seventy Three
235 18.69 Supply of clay ball having size of 25 mm to 50 mm. 849.41 Rupees Eight Hundred Cmt
Forty Nine And Paise Forty
236 2.00 Electro logging of bore hole. 14,140.00 Rupees Fourteen Job
Thousand One Hundred
0.00 Borewell - Rupees Nil -
237 120.00 (a) Drilling of pilot bore hole in all strata by mud flush DR Rig 250/ 300 mm dia. 865.57 Rupees Eight Hundred mtr.
Sixty Five And Paise Fifty
238 120.00 (b) Reaming of 250 mm dia pilot bore to 550 mm dia bore hole including assembling lowering housing casing, strainer pipes 535.30 Rupees Five Hundred mtr.
with gravel packing, clay balls packing etc. Thirty Five And Paise Thirty
239 1.00 (c) Cement sealing by means of mud pump without cost of cement. 13,405.73 Rupees Thirteen Thousand job
Four Hundred Five And
Paise Seventy Three Only
240 1.00 (d-a) Development of each water bearing zone coming across the depth of tube well by lowering 100 mm dia drop line & 32 28,054.77 Rupees Twenty Eight job
mm dia GI air line with suitable capacity air compressor for min. 06 running hours till the availability of sand free discharge. Thousand Fifty Four And
Paise Seventy Seven Only
Total Quantity Description of Item Rate Rate in word Unit Amount
241 1.00 (d-b) Charges of air compressor of 900 cfm / 200 psi capacity for minimum 6 running hours. 06 running hours. 27,603.30 Rupees Twenty Seven job
Thousand Six Hundred
Three And Paise Thirty Only
242 80.00 supply and delivery of ISI marked ERW M.S.pipes conforming to IS: 4270/2001 with latest amendment 250 mm dia (Min.7.10 3,605.70 Rupees Three Thousand mtr.
mm thickness) Six Hundred Five And Paise
243 40.00 supply and delivery of cage type Trapezoidal shape ( ' V ') wire wound low carbon, Galvanized screen pipe and Stainless Steel 3,088.58 Rupees Three Thousand mtr.
Screen pipes, confirming IS: 8110 Low carbon, Galvanized screen pipe 250 mm dia HEAVY ) 1.00mm Slot size Eighty Eight And Paise Fifty
244 4.00 Clamp made from M.S. plate with 3 holes on either side with nuts & bolts of Std. Make and suitable size.900 mm X 100 mm 2,287.92 Rupees Two Thousand Pair
X 16 mm flat suitable for 300 mm dia.P Two Hundred Eighty Seven
And Paise Ninety Two Only
245 2.00 Bore plug having 100 mm height made from M.S. plate with 3holes at equal distance on circumference for nut-bolts 1,161.62 Rupees One Thousand One No.
type,locking arrangement with nuts-bolts & lock nuts of std. Make complete. Suitable for 250 mm dia pipe. Hundred Sixty One And
Paise Sixty Two Only
246 2.00 3. M. S. bail plug having length of 0.45 mts from medium class pipe as per IS. 1,065.02 Rupees One Thousand No.
Sixty Five And Paise Two
247 2.00 4. Steel bent plates suitable to 250 mm diapipe of size 200 mm x 150 mm x 6 mm. 91.71 Rupees Ninety One And No.
Paise Seventy One Only
248 1.10 Supply of ISI mark cement. 6,365.02 Rupees Six Thousand Ton.
Three Hundred Sixty Five
And Paise Two Only
249 11.30 Supply of well sorted "Sevaliya" gravels of size 4 mm to 6 mm including carting, loading,unloading & stacking at site of work. 2,049.29 Rupees Two Thousand Cu.mt.
Forty Nine And Paise
Twenty Nine Only
250 11.30 Supply of clay ball having size of 25 mm to 50 mm. 758.51 Rupees Seven Hundred CMT
Fifty Eight And Paise Fifty
251 1.00 Electro logging of bore hole. 18,180.00 Rupees Eighteen Thousand job
One Hundred Eighty Only
252 1.00 Chemical analysis charges of water sample. 1,010.00 Rupees One Thousand Ten job
0.00 submersible pump set in borewell - Rupees Nil -
253 2.00 Providing electric motor driven submersible pump set conforming to IS 8034-1981 withmotor conforming to IS 9283-1979 44,740.98 Rupees Forty Four No
workingat 3 phase, 400/440 volts, 50 Hertz AC supply and 2900 rpm.Category : 6.1 Discharge : 510 LPM, Head : 123 Mtrs, Thousand Seven Hundred
HP : 25 Category : 7.2 Forty And Paise Ninety
254 1.00 Providing ATS control panel board for 15 hp subnercible pump detail specification as per GWSSB R/C : ATS (A. T. S. from 21 24,518.76 Rupees Twenty Four No
to 30 HP) Thousand Five Hundred
Eighteen And Paise Seventy
Total Quantity Description of Item Rate Rate in word Unit Amount
255 150.00 Providing flat PVC submersible cable of Size : 1 x 3 x 35 square mm copper cable 463.59 Rupees Four Hundred Sixty MTR
Three And Paise Fifty Nine
256 120.00 Providing heavy duty GI column pipe threaded at both ends of 3 meters length conforming to IS 1239 (part-1) with coupling 709.02 Rupees Seven Hundred MTR
at one end and thread protector at other end. including all taxes, insurance, transportation, freight charges, octroi, Nine And Paise Two Only
inspection charges, loading, unloading,( GWSSB CIVIL SOR) conveyance to departmental stores, stacking etc. complete. Size
257 2.00 Providing support clamps of size 4450 mm X 65 mm X 10 mm flat suitable to 65/80 mmdia.Pipe 547.42 Rupees Five Hundred Forty Pair
Seven And Paise Forty Two
258 4.00 Providing following specials.(1) Heavy duty G. I. coupling of 100 mm length and 8 mm thickness and 8 TPI threaded as per IS 238.36 Rupees Two Hundred No
with G. I. nipple 8 TPI threaded at one end & 11 TPI threaded at other end of 125mm length suitable to 80 mm dia. Pipe. Thirty Eight And Paise
Thirty Six Only
259 2.00 bore plug 100 mm height made out of M S plate with 3 holes at equal distance on cercrunferance for nut bolt type ;ocking 530.25 Rupees Five Hundred No
arrangement with nuts bolt & lock nut of standrand make from 5 mm thick M S plate suitble for 200 mm dia pipe Thirty And Paise Twenty
260 4.00 (3) Heavy duty 90 degree G. I. bend suitable to 80 mm dia. Pipe. 858.50 Rupees Eight Hundred Fifty No
Eight And Paise Fifty Only
261 1.00 Lowering of sub pump with required nos. and size of column pipes by means of proper chain pulley block and pipe wrenches 2,222.00 Rupees Two Thousand No
after checking threads of each pipe with coupling to take load of pump set and pipe assembly filled with water Above 90 Two Hundred Twenty Two
metersdepth including lead jointing. Only
0.00 horizontal mono sub pump set with associated accessories etc in Sump - Rupees Nil -
262 2.00 Providing and fixing of horizontal monoser submersible pump set 3 phase 400/440, 50c/s A C supply & 2900 RPM category 28,257.78 Rupees Twenty Eight Set.
SM 4.5 ,12.5 HP of 1600 LPM discharge & 26 mts. Head with necessary elecrtical motor etc complete as directed by Thousand Two Hundred
engineer in charge - 4.5. Fifty Seven And Paise
Seventy Eight Only
263 35.00 Providing ISI mark GI pipes with coupling of medium duty as per IS 1239 /1990 including carting, loading & unloading etc. of 780.73 Rupees Seven Hundred MTR.
100 mm size. Eighty And Paise Seventy
264 1.00 Providing control panel board for above sub pump with 5 KVAR capacitor Type & Range : Star / Delta (11 HP to 15 HP) 11,043.34 Rupees Eleven Thousand No.
Forty Three And Paise
Thirty Four Only
265 50.00 Providing flat PVC submersible copper cable of Size : 1 x 3 x 4 square mm. 68.73 Rupees Sixty Eight And MTR.
Paise Seventy Three Only
266 2.00 Providing and supplying ISI mark CI D/F Sluice Valves , Butterfly Valves & Reflux Valves of following class and diameter 2,696.70 Rupees Two Thousand Six Pair
including all taxes, insurance, transportation, freight charges, octroi, inspection charges, loading, unloading, conveyance to Hundred Ninety Six And
departmental stores, stacking etc. complete. Sluice valves with ISI mark only PN-1 With hand wheel /cap operated (PD type Paise Seventy Only
short body)80mm dia
267 2.00 Providing and supplying ISI mark CI D/F Sluice Valves , Butterfly Valves & Reflux Valves of following class and diameter 2,898.70 Rupees Two Thousand No.
including all taxes, insurance, transportation, freight charges, octroi, inspection charges, loading, unloading, conveyance to Eight Hundred Ninety Eight
departmental stores, stacking etc. complete. Sluice valves with ISI mark only PN-1 With hand wheel /cap operated (PD type And Paise Seventy Only
short body)100 mm dia
Total Quantity Description of Item Rate Rate in word Unit Amount
268 1.00 Providing & fitting GI specials such as bends,flanges, reducer, nipple, MS hardware, rubber packings etc. with required 5,555.00 Rupees Five Thousand Five Job
excavation & refilling for connection to pipe line etc. complete. Hundred Fifty Five Only
269 1.00 Providing TPIC switch fuse unit withneutral link for 415 volts, erected on polished wooden block of 60 x 60 x 2.5 cm size of 4,545.00 Rupees Four Thousand No.
min. 63 amperes capacity with rewirable fuse of category II. Five Hundred Forty Five
270 2.00 Erection, testing & commissioning of mono submersible pump set complete with fitting of valves, laying of pipes, cable 9,090.00 Rupees Nine Thousand Job
jointing etc.complete job. Ninety Only
271 1.00 Providing & erecting funnel type earthing having earth plate of following size buried in specifically prepared earth pit 03 mts. 3,833.96 Rupees Three Thousand Job
below ground with40 Kg charcoal & salt with alternate layers of charcoal & salt, 20 mm dia GI pipe with funnel with wire Eight Hundred Thirty Three
mesh for watering & bricks masonary block, CI cover complete as per para 7.3 of IS 3043 with necessary length of double And Paise Ninety Six Only
copper 6 SWG wire bolted with lug to the plate and covered in 12 mm dia. GI pipe 2.5 mts. long complete connected to the
nearest switchgear with end socket as perdirection & duly tested by earth tester as per drawing with following specifications
with 30 x 30 x 0.35 cms CI earth plate
0.00 Electrical works - Rupees Nil 0 -
272 66.00 Point wiring for Tissino / Modular secondary light point with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (green) both are of ISI 200.99 Rupees Two Hundred And Pt.
marked 1.1 kV grade FRLS PVC insulated multi strand copper wires, in below type of pipe to be erected complete with Paise Ninety Nine Only
earth continuity and necessary connection with primary light with accessories erected on Metal / PVC / wooden box
covered with 3 mm thick PC(Polycarbonate) / Acrylic sheet for open / concealed wiring. with necessary Lamp holder /
ceiling rose / H.D.Connector as directed. (f) with medium class Rigid PVC pipe and accessories erected concealed in
wall/ceiling complete
273 1086.00 Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS 582.77 Rupees Five Hundred Pt.
PVC insulated multi strand copper wires up to 10 mtr length, in below type of pipe erected with 6A Modular type switch / Eighty Two And Paise
bell push & accessories and earth continuity of following type, erected on PVC / Metallic / Wooden box, single mounting Seventy Seven Only
base frame covered with textured / metallic / white front plate modules erected on / in wall / ceiling as per pipe erected,
with necessary Lamp holder/ceiling rose / H.D.Connector as directed. (f) with medium class Rigid PVC pipe and accessories
erected concealed in wall/ceiling complete.
274 248.00 Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV Grade FRLS PVC 809.01 Rupees Eight Hundred Pt.
insulated multi strand copper wires up to 10 mtr length, in below type of pipe erected with 6A Modular type switch and Nine And Paise One Only
hum free EME four or more step type electronic fan regulator with separately mounted and accessories with earth
continuity of following type erected on PVC / Metallic/ Wooden box, single mounting base frame covered with textured/
metallic/ white front plate modules erected on / in wall / ceiling as per pipe erected. with necessary ceiling rose /
H.D.Connector as directed. (f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete.
275 341.00 Point wiring for on board Looped Plug with 6A Modular type switch & 5 pin socket erected on PVC / Metallic/Wooden box, 309.06 Rupees Three Hundred Pt.
single mounting base frame covered with textured / metallic/ white front plate modules erected on / in wall / ceiling with Nine And Paise Six Only
following type accessories.
Total Quantity Description of Item Rate Rate in word Unit Amount
276 158.00 Point wiring for Two Way Controlled Light Point with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (green) both are of .ISI marked 725.18 Rupees Seven Hundred Pt.
1.1 kV grade FRLS PVC insulated multi strand copper wires erected in below type of pipe with 6A Modular type switches and Twenty Five And Paise
following type of accessories erected on PVC / Metallic/Wooden box, single mounting base frame covered with textured / Eighteen Only
metallic/white front plate modules erected on / in wall / ceiling as per pipe erected. with necessary batten/angle holder or
ceiling rose or H.D.Connector as directed. (f) with medium class Rigid PVC pipe and accessories erected concealed in
wall/ceiling complete
277 256.00 Providing following type of Modular Type Accessories mounted with pvc / metallic box, single mounting base frame covered 151.50 Rupees One Hundred Fifty Ea.
with textured / metallic front plate , modules erected with necessary connection. As desired by Engineer In charge (1) One One And Paise Fifty Only
278 256.00 Providing following type of Modular Type Accessories mounted with pvc / metallic box, single mounting base frame covered 151.50 Rupees One Hundred Fifty Ea.
with textured / metallic front plate , modules erected with necessary connection. As desired by Engineer In charge (2) One One And Paise Fifty Only
279 295.00 Providing following type of Modular Type Accessories mounted with pvc / metallic box, single mounting base frame covered 180.79 Rupees One Hundred Ea.
with textured / metallic front plate , modules erected with necessary connection. As desired by Engineer In charge (9) Eighty And Paise Seventy
16Amp. SP one way switch. Nine Only
280 295.00 Providing following type of Modular Type Accessories mounted with pvc / metallic box, single mounting base frame covered 199.98 Rupees One Hundred Ea.
with textured / metallic front plate , modules erected with necessary connection. As desired by Engineer In charge (10) Ninety Nine And Paise
6/16Amp. Universal socket Ninety Eight Only
281 1144.00 Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size complete to be erected on/in wall or ceiling 33.33 Rupees Thirty Three And Mtr.
erected with necessary PVC fittings & Junction boxes fixed with adhesive solution & Clamps with following dia of pipes, in Paise Thirty Three Only
approved manner as directed (b) 25 mm
282 220.00 Supplying and laying UPVC cable trunking system comprising unplasticised polyvinyl, chloride rigid material with ignition 277.75 Rupees Two Hundred Mtr.
free and flame proof confirming BS with necessary end caps Internal and external bend, flat bends, coupler, tee etc..All Seventy Seven And Paise
necessary accessories and measuring of following sizes (1) 75 mm x 50 mm trunking Seventy Five Only
283 6278.00 Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of pipe to be 78.78 Rupees Seventy Eight And Mtr.
erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green Paise Seventy Eight Only
colour for earth continuity of following size (a) with medium class Rigid PVC pipe and accessories (a) 2 wire 1.5 sq. mm
284 6120.00 Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of pipe to be 104.03 Rupees One Hundred Four Mtr.
erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green And Paise Three Only
colour for earth continuity of following size (a) with medium class Rigid PVC pipe and accessories (b) 2 wire 2.5 sq. mm
285 2108.00 Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of pipe to be 140.39 Rupees One Hundred Forty Ea.
erected in / on wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth And Paise Thirty Nine Only
continuity of following size (a) with medium class Rigid PVC pipe and accessories a) 2 wire 4 sq. mm
Total Quantity Description of Item Rate Rate in word Unit Amount
286 1108.00 Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of pipe to be 326.23 Rupees Three Hundred Ea.
erected in / on wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth Twenty Six And Paise
continuity of following size (a) with medium class Rigid PVC pipe and accessories (h) 4 wire 6 sq. mm Twenty Three Only
287 60.00 Providing and erecting Mains with ISI marked, 1.5KV grade electrolyte multi stranded, annealed copper conductor with heat 22.22 Rupees Twenty Two And Mtr.
resistant PVC insulated conforms to IS 694, IEC - 227 erected in existing pipe of following size (Specifically for control panel, Paise Twenty Two Only
relays, power switchgears, motor starters & control wiring) with required size of copper lugs, nuts and bolts if required. (b)
One wire 1.50 sq. mm
288 164.00 Providing and erecting Mains with ISI marked, 1.5KV grade electrolyte multi stranded, annealed copper conductor with heat 70.70 Rupees Seventy And Paise Mtr.
resistant PVC insulated conforms to IS 694, IEC - 227 erected in existing pipe of following size (Specifically for control panel, Seventy Only
relays, power switchgears, motor starters & control wiring) with required size of copper lugs, nuts and bolts if required. (e)
One wire 6.00 sq. mm
289 60.00 Providing and erecting Mains with ISI marked, 1.5KV grade electrolyte multi stranded, annealed copper conductor with heat 115.14 Rupees One Hundred Mtr.
resistant PVC insulated conforms to IS 694, IEC - 227 erected in existing pipe of following size (Specifically for control panel, Fifteen And Paise Fourteen
relays, power switchgears, motor starters & control wiring) with required size of copper lugs, nuts and bolts if required. (f) Only
One wire 10.00 sq. mm
290 600.00 Supplying and erecting Flexible PVC insulated multistrand multicore 1.1 kv grade ISI marked copper wires of following size to 97.97 Rupees Ninety Seven And Mtr.
be erected as directed. (h) 2.50 Sq.mm 3 core round PVC sheathed Paise Ninety Seven Only
291 120.00 Providing & erecting Switch board for Computer or electric apparatus consisting of following modular type accessories 1,133.22 Rupees One Thousand One Ea.
mounted with PVC / Metallic concealed/ open box with single mounting base frame covered with textured/metallic /white Hundred Thirty Three And
front plate,modules erected with necessary connections as directed 1 no. 6A/16A universal plug-switch combined. 3 nos. 6A Paise Twenty Two Only
Switch 3 nos. 6A 5 pin Plug For Modular Type Accessories
292 38.00 Decorative call bell Ting-tong box type 250 volts complete erected 71.71 Rupees Seventy One And Ea.
Paise Seventy One Only
293 2.00 Supply of Fibreglass Platform Step (A Type) Ladder - 6 FT having following specifications : 19,377.86 Rupees Nineteen Ea.
It should have large fully serrated Thousand Three Hundred
platform 15” wide 20” deep which locks ladder ,Aluminium feet with thick rubber tread, top rail guard to serve as a railing, Seventy Seven And Paise
two pairs of gusset support at the bottom step and All gussets are heavy duty steel. Capacity : 300 lbs. Step Width : 3’ Eighty Six Only
Approx. spread : 50” Width : 26.5” Approx. Wt. : 16 Kg Approx. Cube : 8.15’"
294 1.00 Supply of Fibreglass Platform Step (A Type) Ladder - 10 FT having following specifications : 27,978.01 Rupees Twenty Seven Ea.
It should have large fully serrated Thousand Nine Hundred
platform 15” wide 20” deep which locks ladder , Aluminium feet with thick rubber tread, top rail guard to serve as a railing, Seventy Eight And Paise
two pairs of gusset support at the bottom step and All gussets are heavy duty steel. Capacity : 300 lbs. Step Width : 4’ One Only
Approx. spread : 75” Width : 32” Approx. Wt. : 29 Kg Approx. Cube :
Total Quantity Description of Item Rate Rate in word Unit Amount
295 1.00 Supply of Fibreglass Platform Step (A Type) Ladder - 18 FT having following specifications : 35,590.38 Rupees Thirty Five Ea.
It should have large fully serrated Thousand Five Hundred
platform 15” wide 20” deep which locks ladder , Aluminium feet with thick rubber tread, top rail guard to serve as a railing, Ninety And Paise Thirty
two pairs of gusset support at the bottom step and All gussets are heavy duty steel. Capacity : 300 lbs. Eight Only
296 890.00 Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with 535.30 Rupees Five Hundred Ea.
housing used as a heat sink shall be made of thick sheet Steel conforming to IS: 513/ CRCA/ aluminium die cast powder Thirty Five And Paise Thirty
coated and high U.V. & corrosion resistance with diffuser with company mark/ name 160V to 270V, Power Factor more Only
than 0.95, THD < 15%, CCT 3000 K to 6500K, Luminaire efficacy> 85 lumens /watt , LED driver efficiency > 85 % ( fitting
required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED fittings.The
Engineer incharge may select any wattage capacity between the ranges shown.) (A) Tube Light with integral driver (v) 36-40
Watts, Surge-2 KV, IP-20, conventional 4 feet
297 296.00 Supplying and erecting led lamps with following wattage capacity of 220 to 240 voltage, minimum 15000 burning hours life, 112.11 Rupees One Hundred Ea.
500 V in built-surge protection,Polycarbonate diffuser, mounting suitable for E14 / E27 / B22 lamp holders, pf >= 0.5 (A) LED Twelve And Paise Eleven
Lamps integral type, with PC diffuser suitable LAMP holder (ii) 5 to 8 watts Only
298 26.00 Supplying and erecting LED street light / Flood light fittings with High power White LEDs wattage of 3 Watt and above 4,248.06 Rupees Four Thousand Ea.
assembled on single MCPCB, efficiency more than 130 lm/w and corrosion free High pressure die cast aluminum housing Two Hundred Forty Eight
with smooth finish powder coated and heat sink extruded aluminium with diffuser and Polycarbonate optics/ lenses, with And Paise Six Only
toughened glass with company mark/name engraved or embossed 160 to 270 V,Power Factor more than 0.95, THD < 10 %,
CCT 3000 K to 5700K,Uniformity ratio >0.45, Luminaire efficacy> 100 lumens/watt . LED driver efficiency > 85 %.( fittings
required LM-79 & LM-80 certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED fittings.The
Engineer incharge may select any wattage capacity between the ranges shown.) (A) Street Light (IP-65), Surge protection -
4KV integral and ,Light must have 440VAC line supply with over-voltage protection. (ii) above 48 to 59 Watts
299 4.00 Providing and erecting Approved make Four pole moulded case circuit breaker having breaking capacity ICU of 35 KA. at 415 8,861.74 Rupees Eight Thousand Ea.
V. having normal current rating 125A. with Fixed thermal & magnetic release suitable to work on A.C.supply 50 c/s. with all Eight Hundred Sixty One
internal connections, spreader tinned copper & complete erected in existing 16 G.M.S. housing. ICS=100% of ICU only And Paise Seventy Four
300 2.00 Providing and erecting Approved make Four pole moulded case circuit breaker having breaking capacity ICU of 35 KA. at 17,843.67 Rupees Seventeen Ea.
415 V. having Normal current rating 200A.with variable Thermal & magnetic release suitable to work on A.C.supply 50 Hz. Thousand Eight Hundred
with all internal connections, spreader tinned copper & complete erected in existing 16 G.M.S.housing Forty Three And Paise Sixty
301 3.00 Providing and erecting Approved make Earth fault Relay suitable to mount with inter connection suitable to following size 5,482.28 Rupees Five Thousand Ea.
of moulded case circuit breaker having CT ratio & MCCB rating as following along with shunt trip 220V AC. with all internal Four Hundred Eighty Two
connections & complete erected in existing M.S.housing. (2) 125 A -200 A , CT Ratio 1/200 And Paise Twenty Eight
302 6.00 Providing and erecting following additional parts for panel mounting MCCBs (A) Extended operating rotary handle with pad 961.52 Rupees Nine Hundred Sixty Ea.
lock with three position trip,off,on suitable for 25A to 250 A panel mounting One And Paise Fifty Two
Total Quantity Description of Item Rate Rate in word Unit Amount
303 3.00 Supplying & erecting approved make Four Pole 415V change over switch interior for panel mounting with operating 7,790.13 Rupees Seven Thousand Ea.
mechanism A.C.23 duty confirming to IS for (C)100-125A Seven Hundred Ninety And
Paise Thirteen Only
304 11.40 Supplying and erecting triple pole & neutral 440V / 500V panel mounting Copper Busbars with four equal Nos. of electrolyte 3,202.71 Rupees Three Thousand Rn.Mtr
bus having current density not more than 1.6 Amp. / sq.mm (Rated current / cross section area) duly wrapped with colour Two Hundred Two And
insulating tape for phase sequence of following current carrying capacity, erected with necessary bus bar supports Paise Seventy One Only
/insulators, main cable socket to each bar, erected in existing cubical panel with necessary connections. (B) Suitable for
305 770.00 Providing and erecting Miniature circuit breaker single pole 6A to 25A suitable to operate on 240 V A.C. system and having 123.22 Rupees One Hundred Ea.
breaking capacity 10 KA to be erected in existing box. confirming to IS 8828/1996 with ISI Mark Twenty Three And Paise
Twenty Two Only
306 12.00 Providing & erecting 240 V MCB double pole switch for motor & inductive load (C Curve) having 10 KA breaking capacity & 329.26 Rupees Three Hundred Ea.
confirms to IS : 8828 in existing box having following capacity (A) 6 to 32 Amp. Twenty Nine And Paise
Twenty Six Only
307 44.00 Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Curve) having 10KA breaking capacity & confirms 736.29 Rupees Seven Hundred Ea.
to IS :8828 in existing box having following capacity (b) 40 Amp. Thirty Six And Paise Twenty
308 18.00 Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Curve) having 10KA breaking capacity & confirms 811.03 Rupees Eight Hundred Ea.
to IS :8828 in existing box having following capacity (c)63 Amp. Eleven And Paise Three
309 41.00 Sheets steel powder coated enclosure suitable for incorporating One/Two nos. MCB. 176.75 Rupees One Hundred Ea.
Seventy Six And Paise
Seventy Five Only
310 41.00 Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted fitted with busbar, 2,913.85 Rupees Two Thousand Ea.
neutral link, earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate nos. of Nine Hundred Thirteen And
MCBs.(The DBs should be used of same company of MCB to be used) suitable for (B) three phase incoming and single phase Paise Eighty Five Only
horizontal type outgoing Per phase isolation type (PPI) (b) sheet steel double door (ii) 6 way
311 123.00 Providing and erecting Approved make RCCBs conforming to IS: 12640 and having sensitivity of 30 mA and Short Circuit 2,166.45 Rupees Two Thousand One Ea.
withstand capacity of 10 KA and suitable for operation on single phase 240 V,50Hz. having characteristic of quick action & Hundred Sixty Six And Paise
tripping with all advance feature & do not incorporate any electronic component. for following Max. rating erected as Forty Five Only
directed (i) 25 Amps.DP
312 41.00 Providing and erecting Approved make RCCBs conforming to IS: 12640 and having sensitivity of 30 mA and Short Circuit 2,900.72 Rupees Two Thousand Ea.
withstand capacity of 10 KA and suitable for operation on 3 phase and neutral 415V,50Hz. having characteristic of quick Nine Hundred And Paise
action & tripping with all advance feature & do not incorporate any electronic component for following Max. rating erected Seventy Two Only
as directed. (ii) 40Amps. FP
313 147.00 Providing and erecting Annealed bare Copper wire 8 to 16 SWG. 794.87 Rupees Seven Hundred Kg.
Ninety Four And Paise
Eighty Seven Only
314 6.00 Providing and erecting Pipe type earthing having 150 cms.long and 2.5 cms. dia. galvanised iron pipe with coupling and buch 368.65 Rupees Three Hundred Ea.
buried in specially prepared earth pit complete with necessary 8 SWG earth wire. Sixty Eight And Paise Sixty
Total Quantity Description of Item Rate Rate in word Unit Amount
315 6.00 For using salt and charcoal / coke as required for pipe type earthing. 171.70 Rupees One Hundred Ea.
Seventy One And Paise
316 49.00 Supplying & erecting earth pit of minimum bore dia.150mm size approved make Earthing Electrode consisting Pipe-in-Pipe 4,591.46 Rupees Four Thousand Ea.
Technology as per IS 3043-1987 made of corrosion free hot dipped G.I.Pipes having Outer pipe dia of 50mm having 80-200 Five Hundred Ninety One
Micron galvanising, Inner pipe dia of 25 mm having 200-250 Micron galvanising, connection terminal dia of 12mm with And Paise Forty Six Only
constant ohmic value surrounded by highly conductive compound with high charge dissipation suitable for following type of
applications with chamber and heavy duty cover. (A)(approved make OEM has to submit test certificate including value of
earth resistance of installation duly stamped and signed by agency and officer Incharge has to ensure the value of earthing
resistane mentioned in test Certificate) & having back filling compound of (B) Inner chemical (CCM Compound)- Resistivity:-
0.2 ohm / meter testing as per IEC 62561-2017, Voltage drop:- < 1 volt at no load & dry form, Sulphar content:- <2%(C) Back
fill Compound :- Earthing compound should be capable to retain moisture for long time Necessary test report must be
submitted by Agency. (a) For Electrical Installation up to 440V in normal soil Length of pipe - 1 Mtr Back filling compound -
Nos Bag of 15 Kg.
317 18.90 Providing & erecting weather proof, dust & vermin proof, floor mounted front operated indoor type cubical panel board 10,468.65 Rupees Ten Thousand Four Sq.Mtr
necessary IP-42 and above protection as per approval from engineer incharge made from 14 SWG thick CRC M.S. sheet for Hundred Sixty Eight And
outer body & doors, 16 SWG thick CRC M.S.sheet for internal partitions with necessary accesories , supporting angles/ flats Paise Sixty Five Only
channel including cutting, bending, drilling, welding, riveting with internal partitions & cable alley as per requirements &
instruction of engineer-in-charge with erection of supplied switch gears, BUSBARS, suitable size of inter connecting PVC
copper wire / copper-aluminium strips, rubber grommets, rib, bakelite control fuses/MCB for measuring instruments, earth
bus & earth bolts, foundation flange - bolts-base Plates, sufficient nos. of hinged doors, handles with locking arrangement
and rubber gasket,heavy duty end terminal connection,danger notice board,necessary ventilation,earthing strip complete.
The Panel shall be painted with epoxy powder coating. (The rates excludes the cost of switchgears, bus bars, inter
connecting mains & Copper Aluminium strips, meters, Fuses etc. The dimension shall be measured excluding base beams)
The panel shall be supplied with following approved manufacturers with following size. (A) locally fabricated panel board (i)
with 350mm depth
318 90.00 Providing , erecting , fabricating the M.S. structure as per requirement on site incorporating proper size of M.S. angles, 77.77 Rupees Seventy Seven And Kg.
square, round, flats, bars, channels, sections complete with cutting, welding, grinding & finishing duly painted with one coat Paise Seventy Seven Only
of red oxide with erection on site as per direction of engineer in charge with necessary grouting, cementing, plastering &
finishing complete.
319 420.00 Supplying & erecting FRLS-XLPE(IS:7098)(I)-88 ISI unarmoured copper cable 1.1 kV grade to be erected as directed of 236.34 Rupees Two Hundred Mtr.
following size. (F) 3 core 4 Sq. mm Thirty Six And Paise Thirty
320 50.00 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on 264.62 Rupees Two Hundred Sixty Mtr.
wall with necessary clamps or in existing trench / pipe of following size of cables (B) 3 1/2 core 35 Sq. mm ( 16 Sq. mm 1/2 Four And Paise Sixty Two
321 100.00 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on 589.84 Rupees Five Hundred Mtr.
wall with necessary clamps or in existing trench / pipe of following size of cables (E) 3 1/2 core 95 Sq. mm ( 50 Sq. mm 1/2 Eighty Nine And Paise
core) Eighty Four Only
322 305.00 Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on 168.67 Rupees One Hundred Sixty Mtr.
wall with necessary clamps or in existing trench / pipe of following size of cables (c) 4 core 10 Sq. mm Eight And Paise Sixty Seven
Total Quantity Description of Item Rate Rate in word Unit Amount
323 125.00 Making trench in soft soil of suitable width of 90 cm deep for laying cable or locating the fault all over the run and back 55.55 Rupees Fifty Five And Paise Mtr.
filling the same and making the surface as normal ground. Fifty Five Only
324 125.00 Providing & laying approved make Double walled corrugated pipes (DWC) of polyethylene(conforming to IS 14930 II )with 62.62 Rupees Sixty Two And Mtr.
necessary connecting accessories of same material at required depth in existing trench for laying of cable. below ground / Paise Sixty Two Only
road surface for enclosing cable (A) 50 mm outer dia
325 16.00 Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete 38.38 Rupees Thirty Eight And Ea.
with out going tails, insulating tape etc for following size of cables. (C) 2 to 4 core 10 Sq. mm Paise Thirty Eight Only
326 8.00 Providing and, fixing heavy duty flange type brass double compression type cable gland with rubber ring for PVC insulated 75.75 Rupees Seventy Five And Ea.
armoured cable complete with out going tails, insulating tape etc for following size of cables. (B) 3 & 1/2 core 35/50 Sq. mm Paise Seventy Five Only
327 4.00 Providing and, fixing heavy duty flange type brass double compression type cable gland with rubber ring for PVC insulated 131.30 Rupees One Hundred Ea.
armoured cable complete with out going tails, insulating tape etc for following size of cables. (D) 3 & 1/2 core 95 Sq. mm Thirty One And Paise Thirty
328 1.00 Solder less crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high 15.15 Rupees Fifteen And Paise Ea.
pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. (C) 16/25 Fifteen Only
329 248.00 Providing and erecting Approved make Ceiling fan with double ball bearing ISI mark with condenser A.C. 23OV.50 c/s.1200 1,596.81 Rupees One Thousand Five Ea.
mm. sweep complete, canopy and 30 cms. down rod erected on existing hook or clamp with 24/0.2 , 3 core flexible wire Hundred Ninety Six And
with earthing. [Make shall be approved by Engineer in charge] Paise Eighty One Only
330 248.00 Supplying and erecting 19 / 20 mm. nominal bore Medium Class M.S. Pipe down rod erected duly painted for fan complete 108.07 Rupees One Hundred Eight Mtr.
with necessary 24/ O.20, 3 core flexible wire with earthing. And Paise Seven Only
331 248.00 Supplying & erecting fan hook box of 10 mm M.S. round bar bounded to the RCC bars up to 50mm length each side and 108.07 Rupees One Hundred Eight Ea.
pierced through a 16 Gauge M.S. box / Heavy Duty PVC box complete erected concealed in Ceiling with necessary finishing. And Paise Seven Only
332 62.00 Supplying & erecting approved make low noise decorative exhaust fan having square frame ABS body with inbuilt lowers & 1,703.87 Rupees One Thousand Ea.
square frame. 250mm with 1350 RPM Seven Hundred Three And
Paise Eighty Seven Only
333 6.00 Supplying and erecting approved make Octagonal pole made from HR sheet steel. The pole should be made as per IS. and 7,561.87 Rupees Seven Thousand Ea.
shall be coated with hot dip galvanizing as per IS 2629/2633/4759, suitable suspend local wind speed with integral Junction Five Hundred Sixty One
box consist of terminal plate of min 6mm Hylam sheet, standard profile 35mmX7.5mm Din-Rail for MCB Mounting, stud And Paise Eighty Seven Only
type terminal and arrangement for cable termination to be erected With Suitable foundation (Included) as per details given
by manufacturer considering site requirement. (C) 5 Mtr. Long 70 mm Top X 130 mm bottom dia, 3 mm thickness with
200mmX200mmX12mm base plate, 4-M16 Bolts and 600mm long with necessary G.I. J Bolts .Approx Pole weight 46 kg
334 6.00 Providing 1:2:4 cement concrete foundation & 70 % PCC from bottom including excavation for the pole of size 45 x 45 x 100 809.01 Rupees Eight Hundred Ea.
cm. Deep in below ground level with plinth of 45 cm x 45 cm (or 45 cm dia x 45 cm) high upper ground level with necessary Nine And Paise One Only
curing and finishing in approved manner. ( for 4 & 6 mtr pole)
335 26.00 Providing & erecting approved make street light / wall mounting junction box compression moulded from SMC (thermoset 1,032.22 Rupees One Thousand Ea.
plastic) vertical sliding cover having locking with square head stud loop in / loop out in built terminal suitable for four core Thirty Two And Paise
cable, waterproof of I.P. 54 protected with clamp or bolt nut & earth bolt of following size. (C) 327mm x 254mm x 120 mm Twenty Two Only
Total Quantity Description of Item Rate Rate in word Unit Amount
336 6.00 Providing and erecting street light pole bracket comprising main B Class MS pipe of 4.2 cm/require outside dia. complete 561.56 Rupees Five Hundred Sixty Ea.
with suitable B Class M.S. sleeve tubing of approx. 45cms. length and suitable for 76.5 mm / 80mm. / require size pole top One And Paise Fifty Six Only
having sufficient fasteners for fixing the brackets and having spread of 1 mtr. length with suitable rise as per site condition &
suitable welded stiffener reducer and nipple with check nut complete painted with one coat of Red oxide / PU base primer
and two coats of Aluminium / PU paint. paint with following nos of arms. [A] Single Arm bracket 1 Mtr
337 20.00 Supplying and erecting B class galvanised iron pipe 32 mm outside dia 45 cm long duly welded on 20 cm x 20 cm x 3 mm 343.40 Rupees Three Hundred Ea.
thick M.S. base plate, erected on wall or corner for mounting street light luminaire with necessary hardware materials duly Forty Three And Paise Forty
338 1.00 Supplying and erecting Direct - On - Line Starter with 18 A. rating contactor and with 3.5 Amp. 18A range directly operated 2,100.80 Rupees Two Thousand One Ea.
in totally insulated elegant enclosure for single phase operation up to 3 HP as per IS 13947 complete erected on P.W. Block Hundred And Paise Eighty
with necessary connection. Only
339 2.00 Supplying and erecting Direct-on-line, Starter with 15A.rating contractor and with 4-14A. range, directly operated thermal 2,046.26 Rupees Two Thousand Ea.
overload relay in sheet steel enclosure for 3phase 415V.50 Hz. A.C. motor up to 7.5 H.P.complete erected on P.W. Block Forty Six And Paise Twenty
with necessary connection. Six Only
340 3.00 Supplying and erecting approved make panel mounting type Digital Voltmeter having 3 digits LED display, 0 to 750 AC Volts 1,275.63 Rupees One Thousand Two Ea.
range erected on existing panel board with all connection, wiring etc .with manufacturers calibration certificate. Hundred Seventy Five And
Paise Sixty Three Only
341 3.00 Supplying and erecting approved make panel mounting type Digital Ammeter having 3 digits LED display, external CT 1,558.43 Rupees One Thousand Five Ea.
operated, calibrated for 0 to 1000 Amps suitable to operate on 500 Volt AC , erected on existing panel board with all Hundred Fifty Eight And
connection, wiring etc .with manufacturers calibration certificate. Paise Forty Three Only
342 6.00 Supplying and erecting Ammeter / Voltmeter selector switch for 3 phase AC Supply 500 V on existing panel board with 317.14 Rupees Three Hundred Ea.
necessary connections. Seventeen And Paise
343 3.00 Providing & erecting L.T. Current Transformer with bar primary 50/5 to 1000/5 ratio 15 VA burden erected in existing CRCA 274.72 Rupees Two Hundred Ea.
box duly secured with insulating materials connected to the meter Seventy Four And Paise
Seventy Two Only
344 3.00 Supplying & erecting approved make Power Factor Meter 150mm dia flush/projection type/ balanced & unbalanced load to 5,102.52 Rupees Five Thousand One Ea.
work with appropriately provided CT’s 100/5A to 400/5A ratio & other accessories complete erected in M.S. box & Hundred Two And Paise
connected to the circuit by means of PVC copper Core leads. Fifty Two Only
345 18.00 Supplying and erecting approved make suitable panel indicator lamps of LED type lamp, lens cover, Bakelite holder complete 43.43 Rupees Forty Three And Ea.
erected with necessary connections. Paise Forty Three Only
346 1.00 Supplying of single phase submersible pump set suitable for 100 mm size or more dia bore well having motor capacity and 20,224.24 Rupees Twenty Thousand Nos
discharge as under with necessary panel box (c) Motor rating 2 HP (17 stage) pump having capacity of 106 LPM at 40 mtr Two Hundred Twenty Four
head suitable for 32 mm dia. delivery pipe. And Paise Twenty Four Only
347 2.00 S.I.T.C. submersible pump set suitable for bore of 100 mm. dia. or more having three phase motor capacity not more than 5 24,611.68 Rupees Twenty Four Nos
H.P. with following capacity . Lifting and Lowering taken extra. (B) (16 stage) 140 to 180 LPM discharge at 96 to 69 mtrs. Thousand Six Hundred
head respectively suitable for 50mm dia. delivery pipe Eleven And Paise Sixty Eight
Total Quantity Description of Item Rate Rate in word Unit Amount
348 140.00 Providing and erecting ISI marked PVC insulated PVC Sheathed Flat flexible Submersible copper cable approved make of 104.03 Rupees One Hundred Four Mtr.
following Size. (b) 3 Core x 2.5 Sq. mm. And Paise Three Only
349 140.00 Providing and erecting ISI marked PVC insulated PVC Sheathed Flat flexible Submersible copper cable approved make of 146.45 Rupees One Hundred Forty Mtr.
following Size. (C) 3 Core x 4 Sq. mm Six And Paise Forty Five
350 18.00 SITC of Vertical Air Termination Solid aluminium with Base- 10 mm dia and 1000 mm long. Air Termination Base tested for 9,416.23 Rupees Nine Thousand Nos
conditioning, Ageing Test & Lightning impulse current withstand test: 100 kA of 10/350µs waveform in an accredited Third Four Hundred Sixteen And
party laboratory as per 6.3 & 6.4 of IEC 62561-1 2017 protocol with MAST 34mm dia 3000 mm long- Cold Galvanized Paise Twenty Three Only
351 1300.00 SITC of 8 mm dia solid Aluminium Conductor for roof top mesh grid and tested as per IEC 62561- 2 conducted in the Govt. 299.97 Rupees Two Hundred Mtr.
accredited thirty party laboratory to meet the requirement of IS/IEC 62305 with Required Accessories - Aluminium Holding Ninety Nine And Paise
clamp at every 1 mtr distance, Aluminium/SS cross splicer at every crossing of Alu. conductor, Expansion piece with Ninety Seven Only
connectors at every 20 mtr distance, Aluminium straight Splicer to connect conductors. All Accessories should be tested as
per IEC 62561-1 2018 Cl. 6.3 for conditioning & Ageing Test & 6.4 for Lightning impulse current withstand test: 100 kA of
10/350µs waveform(Ageing & Electrical test ) conducted in a sequence manner & tested in the Govt. accredited Third party
laboratory to meet the requirements of IS/IEC
352 18.00 SITC of 14.2 mm dia 3 mtr long Earth electrode of High tensile steel electrode with 250 micron copper bonding & 1 bag of 5,992.33 Rupees Five Thousand Per Set
Carbon fill Based environment friendly backfill tested as per IEC 62561-7 in NABL accredited Laboratory and suitable Nine Hundred Ninety Two
stainless Steel double sided clamp. Eco Friendly rust proof heavy duty weather proof Polyethylene Earth Pit Chamber with And Paise Thirty Three Only
following dimensions :254 mm dia (top), 330 mm dia (bottom) & 260 mm (height).
353 3.00 SITC of Conventional Zone Module. The Module shall have UL 864 9th Edition listed, Provides an address point for a Zone of 10,605.00 Rupees Ten Thousand Six Nos
up to 25 conventional smoke detector , Blinks green when polled. Latched on red (controlled by panel) when activated, Hundred Five Only
Device address can be programmed with a handheld programmer, Compatible with Class B and Class A wiring, Auxiliary
power source provides for the zone detectors. Approved by UL and FM
354 17.00 Supply,Instllation,Testing and Commissioning of Addressable Manual Call Point - Resettable type - with back box with Binary 3,059.96 Rupees Three Thousand Nos
coded address setting with Status LED for 360° visibility - IP:50 Rating Fifty Nine And Paise Ninety
355 17.00 SITC of Analogue addressable loop powered Base Sounder, variable sound output 50 ~ 98 dB(A) (±2 dB(A)) output at 1 4,848.00 Rupees Four Thousand Nos
metre, 51 user-selectable tones (all tones EN54-3 compatible), Auto shutdown feature prevents noise-pollution, Approved Eight Hundred Forty Eight
by LPCB & VdS Only
356 660.00 Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having 124.11 Rupees One Hundred Mtr.
XLPE insulation, steel wire armouring & FRLS outer sheath complete as required. Twenty Four And Paise
Total Quantity Description of Item Rate Rate in word Unit Amount
357 1.00 8 / 10 Passengers, Ground plus 2 upper floor with Rated Speed of 1.0 m/sec., 14,74,779.78 Rupees Fourteen Lakh(s) Ea.
[1] GEAR LESS LIFT DRIVE (MRL) comprising of High Starting torque Lift 3 phase 440 V A. C. Permanent Magnet Synchronous motor of Seventy Four Thousand
proper rating with high efficiency shall be used.[2] Micro processor based / PLC, ACVVVF, vector control drive with encoder feedback Seven Hundred Seventy
closed loop system shall be used for lift car and door operation which shall be full collective selective operation hall call demand Nine And Paise Seventy
response, UP/DOWN hall stops, Main, Up/ Down Contactor with overload and phase reversal relay and safety controls. [3] Car with M S
platform with bracings of adequate size and to sustain the impact load cabin + passenger with safety factor of fire for steel and side
panels of Stainless steel of sheet of grade 304 duty. Car ceiling will be S.S. finishes with aesthetic appearance with LED ceiling lights. Car
flooring shall be of s/s 304 chaker plate design suggested of engineer in charge. of engineer in charge. Car doors shall be of stainless
steel grade 304, hairline finish with centre opening / telescopic automatic doors. Car panel will also be S.S. 304 finished with emergency
stop device, mechanical door safety device, facility of auto/ attended mode. All car panel buttons and all floor switches must be with
brail language as per lift act. [4] All landing doors must be fire rated for 2 hour shall be fully automatic centre opening/ telescopic
opening made of hairline finish steel grade of 304 with key holes and infrared curtains with Unlocking facility from outside [5]
Appropriate battery operated emergency light in the car along with alarm switch shall be provided. Also, Emergency Light & Fan should
start immediately without any Time Delay as soon as power fails. [6] Digital scrolling indicator system for up-down arrow along with
floor position indicator shall be provided inside the car and at all floors. [7] Full height infra red curtain with multiple cross / crossing
light beams shall be provided. [8] Automatic Rescue Device (ARD) shall be provided accordingly of passenger capacity with Manual
Rescue Operation ( Manual Cranking Facility). [9] Audio visual indication in the lift car showing over loading shall be provided such that
doors kept open till excess load is removed. [10] Spring buffers/PU Buffers shall be provided. [11] Car fan as per passenger capacity with
automatic sleep timer shall be provided. [12] Voice annunciator with suitable music shall be provided in lift car. [13] Self diagnostics
system for operational and safety parameters shall be provided in control panel. [14] Mechanical over speed governor with governor
calibration as per actual site parameters and submission of calibration certificate submission, door key holes in the floor doors, fireman
switch shall be provided. [15] Lift machine hoisting arrangement in the lift machine room and monkey ladder for lift pit should be
provided by the lift agency, along with the other steel structure works, foundations for the machine etc… [16] In the hoist way fascia
plate shall be provided without any extra cost, where ever required as / if directed by engineer in charge. [17] Permanent wiring with
necessary safety devices like RCCB in all circuit, Over Voltage Under Voltage protection and THD eliminator in circuit for lift machine
room and lift well with proper numbers of light points, with fixtures, exhaust fan and plug points shall be provided by the agency. Only
phase Power Supply shall be made available by department in lift machine room. Necessary Earthing as per Lift Act/Rules shall be
arranged by Lift Agency. [18] Any civil/ electrical works for additional and alteration in lift shaft and machine room related to erection of
Total Quantity Description of Item Rate Rate in word Unit Amount
arranged by Lift Agency. [18] Any civil/ electrical works for additional and alteration in lift shaft and machine room related to erection of
lift shall be made by lift agency without any extra cost. (granite / marble fixing around all landing door openings are not in lift agency’s
scope.) [19] Agency has to provide all working drawings and documents and liaison services for obtaining all necessary permission from
lift inspector and other authorities. [20] acrylic transparent licence/display A4 size holder in lift car [20A] As per statutory requirement
of Govt. Of Gujarat lift & escalator act 2000, lift agency has to provide 1. Car top safety barricade 2. Push & talk communication system.
3. Fireman's switch operation at Ground Floor. 4.carrying out third party lift inspection during/after lift erection and provide report by
third party authorized by concern licensing authority. 5.agency has to provide third party insurance up to completion of free
maintenance period and submit the document for the same. [21] Car Panel Operating Buttons at an accessible height from wheelchair
for handicapped person and raised numbers with brail mark with floor position indicator / buttons must be of Auto Glow type clearly
visible when view from inside cabin. [22] For Physically Handicapped person Full Length Handrails of hairline finish steel grade of
should be provided at appropriate 900mm height on the Rear & Side Wall Panels in Lift Car. [23] With Necessary kVA rating voltage
controlled Stabilizer suitable for your controller, drive and all equipments of lift. [24] Necessary rating of DP Elcb and FP Elcb required
for lift is in scope of work which rating is sugested by CEICED Department (electrical Inspector) (B) SPECIAL FEATURES DESCRIPTION OF
LIFTS for PREMIUM category 1. Advanced control system dual 64 bit embedded microprocessor with CANBUS Serial Communication
mode including Regenerative power efficient operation,on site programming facility, Anti nuisance, Pte-opening, BMS/RMS with
necessary online real time monitoring system having necessary connectivity for remote monitoring & other suitable supporting
hardware & software devices to fulfil the purpose. 2. Floor Indication LCD Display with call registration & brail mark with arrival gong
and hall lantern & TFT Screen in the car with MP3 Voice Announcer. 3. CAR Panel should be Scratch resistive SS Moonrock finish / Hair
Line / Honeycomb for car and all Doors, All landing doors must have fire rating up to 2 hours and car door must have multi-level
crisscross beam door protection 4. To & fro communication system & wiring (i.e. car , control room & guard room ) and Each elevator
are equipped with remote monitoring system.agency has to provide mobile app and user id and password for monitoring 8 /
Passengers, Ground plus 2 upper floor with Rated Speed of 1.0 m/sec., (C) With General PLUS ADDITIONAL SPECIAL FEATURES
attached herewith. Prem. Cat.
Total Quantity Description of Item Rate Rate in word Unit Amount
358 1.00 8 / 10 Passengers, Ground plus 5 upper floor with Rated Speed of 1.0 / 1.5 m/sec., 17,77,293.97 Rupees Seventeen Lakh(s) Ea.
[1] GEAR LESS LIFT DRIVE (MRL) comprising of High Starting torque Lift 3 phase 440 V A. C. Permanent Magnet Synchronous motor of Seventy Seven Thousand
proper rating with high efficiency shall be used.[2] Micro processor based / PLC, ACVVVF, vector control drive with encoder feedback Two Hundred Ninety Three
closed loop system shall be used for lift car and door operation which shall be full collective selective operation hall call demand And Paise Ninety Seven
response, UP/DOWN hall stops, Main, Up/ Down Contactor with overload and phase reversal relay and safety controls. [3] Car with M S
platform with bracings of adequate size and to sustain the impact load cabin + passenger with safety factor of fire for steel and side
panels of Stainless steel of sheet of grade 304 duty. Car ceiling will be S.S. finishes with aesthetic appearance with LED ceiling lights. Car
flooring shall be of s/s 304 chaker plate design suggested of engineer in charge. of engineer in charge. Car doors shall be of stainless
steel grade 304, hairline finish with centre opening / telescopic automatic doors. Car panel will also be S.S. 304 finished with emergency
stop device, mechanical door safety device, facility of auto/ attended mode. All car panel buttons and all floor switches must be with
brail language as per lift act. [4] All landing doors must be fire rated for 2 hour shall be fully automatic centre opening/ telescopic
opening made of hairline finish steel grade of 304 with key holes and infrared curtains with Unlocking facility from outside [5]
Appropriate battery operated emergency light in the car along with alarm switch shall be provided. Also, Emergency Light & Fan should
start immediately without any Time Delay as soon as power fails. [6] Digital scrolling indicator system for up-down arrow along with
floor position indicator shall be provided inside the car and at all floors. [7] Full height infra red curtain with multiple cross / crossing
light beams shall be provided. [8] Automatic Rescue Device (ARD) shall be provided accordingly of passenger capacity with Manual
Rescue Operation ( Manual Cranking Facility). [9] Audio visual indication in the lift car showing over loading shall be provided such that
doors kept open till excess load is removed. [10] Spring buffers/PU Buffers shall be provided. [11] Car fan as per passenger capacity with
automatic sleep timer shall be provided. [12] Voice annunciator with suitable music shall be provided in lift car. [13] Self diagnostics
system for operational and safety parameters shall be provided in control panel. [14] Mechanical over speed governor with governor
calibration as per actual site parameters and submission of calibration certificate submission, door key holes in the floor doors, fireman
switch shall be provided. [15] Lift machine hoisting arrangement in the lift machine room and monkey ladder for lift pit should be
provided by the lift agency, along with the other steel structure works, foundations for the machine etc… [16] In the hoist way fascia
plate shall be provided without any extra cost, where ever required as / if directed by engineer in charge. [17] Permanent wiring with
necessary safety devices like RCCB in all circuit, Over Voltage Under Voltage protection and THD eliminator in circuit for lift machine
room and lift well with proper numbers of light points, with fixtures, exhaust fan and plug points shall be provided by the agency. Only
phase Power Supply shall be made available by department in lift machine room. Necessary Earthing as per Lift Act/Rules shall be
arranged by Lift Agency. [18] Any civil/ electrical works for additional and alteration in lift shaft and machine room related to erection of
Total Quantity Description of Item Rate Rate in word Unit Amount
arranged by Lift Agency. [18] Any civil/ electrical works for additional and alteration in lift shaft and machine room related to erection of
lift shall be made by lift agency without any extra cost. (granite / marble fixing around all landing door openings are not in lift agency’s
scope.) [19] Agency has to provide all working drawings and documents and liaison services for obtaining all necessary permission from
lift inspector and other authorities. [20] acrylic transparent licence/display A4 size holder in lift car [20A] As per statutory requirement
of Govt. Of Gujarat lift & escalator act 2000, lift agency has to provide 1. Car top safety barricade 2. Push & talk communication system.
3. Fireman's switch operation at Ground Floor. 4.carrying out third party lift inspection during/after lift erection and provide report by
third party authorized by concern licensing authority. 5.agency has to provide third party insurance up to completion of free
maintenance period and submit the document for the same. [21] Car Panel Operating Buttons at an accessible height from wheelchair
for handicapped person and raised numbers with brail mark with floor position indicator / buttons must be of Auto Glow type clearly
visible when view from inside cabin. [22] For Physically Handicapped person Full Length Handrails of hairline finish steel grade of
should be provided at appropriate 900mm height on the Rear & Side Wall Panels in Lift Car. [23] With Necessary kVA rating voltage
controlled Stabilizer suitable for your controller, drive and all equipments of lift. [24] Necessary rating of DP Elcb and FP Elcb required
for lift is in scope of work which rating is sugested by CEICED Department (electrical Inspector) (B) SPECIAL FEATURES DESCRIPTION OF
LIFTS for PREMIUM category 1. Advanced control system dual 64 bit embedded microprocessor with CANBUS Serial Communication
mode including Regenerative power efficient operation,on site programming facility, Anti nuisance, Pte-opening, BMS/RMS with
necessary online real time monitoring system having necessary connectivity for remote monitoring & other suitable supporting
hardware & software devices to fulfil the purpose. 2. Floor Indication LCD Display with call registration & brail mark with arrival gong
and hall lantern & TFT Screen in the car with MP3 Voice Announcer. 3. CAR Panel should be Scratch resistive SS Moonrock finish / Hair
Line / Honeycomb for car and all Doors, All landing doors must have fire rating up to 2 hours and car door must have multi-level
crisscross beam door protection 4. To & fro communication system & wiring (i.e. car , control room & guard room ) and Each elevator
are equipped with remote monitoring system.agency has to provide mobile app and user id and password for monitoring 8 /
Passengers, Ground plus 5 upper floor with Rated Speed of 1.0 / 1.5 m/sec., (C) With General PLUS ADDITIONAL SPECIAL FEATURES
attached herewith. Prem. Cat.
Total Quantity Description of Item Rate Rate in word Unit Amount
359 2.00 8 / 10 Passengers, Ground plus 6 upper floor with Rated Speed of 1.0 / 1.5 m/sec, 18,78,137.42 Rupees Eighteen Lakh(s) Ea.
[1] GEAR LESS LIFT DRIVE (MRL) comprising of High Starting torque Lift 3 phase 440 V A. C. Permanent Magnet Synchronous motor of Seventy Eight Thousand
proper rating with high efficiency shall be used.[2] Micro processor based / PLC, ACVVVF, vector control drive with encoder feedback One Hundred Thirty Seven
closed loop system shall be used for lift car and door operation which shall be full collective selective operation hall call demand And Paise Forty Two Only
response, UP/DOWN hall stops, Main, Up/ Down Contactor with overload and phase reversal relay and safety controls. [3] Car with M S
platform with bracings of adequate size and to sustain the impact load cabin + passenger with safety factor of fire for steel and side
panels of Stainless steel of sheet of grade 304 duty. Car ceiling will be S.S. finishes with aesthetic appearance with LED ceiling lights. Car
flooring shall be of s/s 304 chaker plate design suggested of engineer in charge. of engineer in charge. Car doors shall be of stainless
steel grade 304, hairline finish with centre opening / telescopic automatic doors. Car panel will also be S.S. 304 finished with emergency
stop device, mechanical door safety device, facility of auto/ attended mode. All car panel buttons and all floor switches must be with
brail language as per lift act. [4] All landing doors must be fire rated for 2 hour shall be fully automatic centre opening/ telescopic
opening made of hairline finish steel grade of 304 with key holes and infrared curtains with Unlocking facility from outside [5]
Appropriate battery operated emergency light in the car along with alarm switch shall be provided. Also, Emergency Light & Fan should
start immediately without any Time Delay as soon as power fails. [6] Digital scrolling indicator system for up-down arrow along with
floor position indicator shall be provided inside the car and at all floors. [7] Full height infra red curtain with multiple cross / crossing
light beams shall be provided. [8] Automatic Rescue Device (ARD) shall be provided accordingly of passenger capacity with Manual
Rescue Operation ( Manual Cranking Facility). [9] Audio visual indication in the lift car showing over loading shall be provided such that
doors kept open till excess load is removed. [10] Spring buffers/PU Buffers shall be provided. [11] Car fan as per passenger capacity with
automatic sleep timer shall be provided. [12] Voice annunciator with suitable music shall be provided in lift car. [13] Self diagnostics
system for operational and safety parameters shall be provided in control panel. [14] Mechanical over speed governor with governor
calibration as per actual site parameters and submission of calibration certificate submission, door key holes in the floor doors, fireman
switch shall be provided. [15] Lift machine hoisting arrangement in the lift machine room and monkey ladder for lift pit should be
provided by the lift agency, along with the other steel structure works, foundations for the machine etc… [16] In the hoist way fascia
plate shall be provided without any extra cost, where ever required as / if directed by engineer in charge. [17] Permanent wiring with
necessary safety devices like RCCB in all circuit, Over Voltage Under Voltage protection and THD eliminator in circuit for lift machine
room and lift well with proper numbers of light points, with fixtures, exhaust fan and plug points shall be provided by the agency. Only
phase Power Supply shall be made available by department in lift machine room. Necessary Earthing as per Lift Act/Rules shall be
arranged by Lift Agency. [18] Any civil/ electrical works for additional and alteration in lift shaft and machine room related to erection of
Total Quantity Description of Item Rate Rate in word Unit Amount
arranged by Lift Agency. [18] Any civil/ electrical works for additional and alteration in lift shaft and machine room related to erection of
lift shall be made by lift agency without any extra cost. (granite / marble fixing around all landing door openings are not in lift agency’s
scope.) [19] Agency has to provide all working drawings and documents and liaison services for obtaining all necessary permission from
lift inspector and other authorities. [20] acrylic transparent licence/display A4 size holder in lift car [20A] As per statutory requirement
of Govt. Of Gujarat lift & escalator act 2000, lift agency has to provide 1. Car top safety barricade 2. Push & talk communication system.
3. Fireman's switch operation at Ground Floor. 4.carrying out third party lift inspection during/after lift erection and provide report by
third party authorized by concern licensing authority. 5.agency has to provide third party insurance up to completion of free
maintenance period and submit the document for the same. [21] Car Panel Operating Buttons at an accessible height from wheelchair
for handicapped person and raised numbers with brail mark with floor position indicator / buttons must be of Auto Glow type clearly
visible when view from inside cabin. [22] For Physically Handicapped person Full Length Handrails of hairline finish steel grade of
should be provided at appropriate 900mm height on the Rear & Side Wall Panels in Lift Car. [23] With Necessary kVA rating voltage
controlled Stabilizer suitable for your controller, drive and all equipments of lift. [24] Necessary rating of DP Elcb and FP Elcb required
for lift is in scope of work which rating is sugested by CEICED Department (electrical Inspector) (B) SPECIAL FEATURES DESCRIPTION OF
LIFTS for PREMIUM category 1. Advanced control system dual 64 bit embedded microprocessor with CANBUS Serial Communication
mode including Regenerative power efficient operation,on site programming facility, Anti nuisance, Pte-opening, BMS/RMS with
necessary online real time monitoring system having necessary connectivity for remote monitoring & other suitable supporting
hardware & software devices to fulfil the purpose. 2. Floor Indication LCD Display with call registration & brail mark with arrival gong
and hall lantern & TFT Screen in the car with MP3 Voice Announcer. 3. CAR Panel should be Scratch resistive SS Moonrock finish / Hair
Line / Honeycomb for car and all Doors, All landing doors must have fire rating up to 2 hours and car door must have multi-level
crisscross beam door protection 4. To & fro communication system & wiring (i.e. car , control room & guard room ) and Each elevator
are equipped with remote monitoring system.agency has to provide mobile app and user id and password for monitoring 8 /
Passengers, Ground plus 6 upper floor with Rated Speed of 1.0 / 1.5 m/sec, (C) With General PLUS ADDITIONAL SPECIAL FEATURES
attached herewith. Prem. Cat.
0.00 Fire work - Rupees Nil -
360 1.00 FIRE FIGHTING PUMPS:- Supply, installation, testing & commissioning of electric driven Hydrant & Sprinkler Pump suitable 3,52,915.21 Rupees Three Lakh(s) Fifty Set
for automatic operation consisting of the following:Horizontal end suction centrifugal pump complete with mechanical seal Two Thousand Nine
and including necessary arrangement for testing of pump Squirrel cage induction motor suitable for 415 V, 50 Hz, AC supply Hundred Fifteen And Paise
of suitable rating for the above pump with synchronous speed of 2900 RPM T.E.F.C. type and conforming to IP:55 and Twenty One Only
flexible coupling and coupling guard with the pump. Common bed plate of fabricated mild steel channel or cast iron type.
Suitable reinforced cement concrete pump foundation including cushy foot mounting, foundation bolts, washers as
required. Suitable reinforced cement concrete pump foundation including cushy foot mounting, foundation bolts, washers
as required. The pump shall be of the following specifications:Discharge-2280 lpm,Head - 56 mtr No. of stage preferred -
Single / Double Speed RPM - 2900 Material of construction a) Impeller - Bronze b) Casing - C.I. c) Shaft & Shaft Sleeve - SS-
410 d) Bearing - Grease Lubicated e) Seal & Make - Mechanical Type of pump - End suction HP :- 45HP (
KW.) ( Make :- KBL / M & P / GROUNDFOS / KSB.)
Total Quantity Description of Item Rate Rate in word Unit Amount
361 1.00 Supply, installation, testing & commissioning of electric driven Jockey Pump suitable for automatic operation consisting of 87,976.05 Rupees Eighty Seven Set
the following: Horizontally mounted centrifugal end suction pump complete with mechanical seal and including necessary Thousand Nine Hundred
arrangement for testing of pump.Squirrel cage induction motor suitable for 4440 V, 50 Hz, AC supply of suitable rating for Seventy Six And Paise Five
the above pump with synchronous speed of 2900 RPM T.E.F.C. type and conforming to IP:55 and flexible coupling and Only
coupling guard with the pump.Common bed plate of fabricated mild steel channel or cast iron type.Suitable reinforced
cement concrete pump foundation including cushy foot mounting, foundation bolts, washers as required.The pump shall be
of the following specifications:Discharge - 180 lpm Head - 56 m No. of stage preferred - Multistage Speed RPM -
Mover - Electric Motor Driven Material of construction a) Impeller - Bronze b) Casing - C.I. c)
Shaft & Shaft Sleeve - SS-410 d) Bearing - Grease Lubicated e) Seal & Make - Mechanical Type of pump - End suction HP:-
4.0 HP ( 3 KW.) ( Make :- KBL / M & P / GROUNDFOS / KSB.)
362 1.00 Supply, installation, testing & commissioning of diesel engine Hydrant Pump suitable for automatic operation consisting of 6,45,736.43 Rupees Six Lakh(s) Forty Set
the following: Horizontal split casing centrifugal pump complete with mechanical seal and including necessary arrangement Five Thousand Seven
for testing of pump Water cooled Diesel Engine developing suitable BHP at 1500 RPM for the Pump, common bed plate for Hundred Thirty Six And
mounting of engine and pump, RCC foundation and vibration damping arrangement by Cushy Foot and engine panel Paise Forty Three Only
provided by engine manufacturer, connection to Engine Starting Panel as per item (4), sealed maintenance free batteries of
24 V, 88 AH. Rate shall include Exhaust pipe of required length with asbestos lagging, muffler, day oil tank of 400 lts with
first charge and manual oil pump set.Flexible coupling and coupling guard with the Pump,Common bed plate of fabricated
mild steel channel or cast iron type.Suitable reinforced cement concrete pump foundation including cushy foot mounting,
foundation bolts, washers as required. Engine panel Sealed maintenance free batteries of 24 V, 88 AH --2 Nos. (1 working +
1 standby)Exhaust pipe of required length with asbestos lagging, muffler Day oil tank G.I.-pipe Metal) of 400 lts with first
charge and manual oil pump set and necessary piping and structural work to place tank at upper level from pump in pump
room,Discharge -2280 lpm, Head - 56 m No. of stage preferred - Single / Double Speed RPM - 1450 Mover - Diesel engine
driven Material of construction a) Impeller - Bronze b) Casing - C.I. c) Shaft & Shaft Sleeve - SS-410 d) Bearing - Grease
Lubicated e) Seal & Make - Mechanical Type of pump - END SUCTION ( Make :- KBL / M & P / GROUNDFOS / KSB.)
Total Quantity Description of Item Rate Rate in word Unit Amount
363 1.00 Supply, installation, testing & commissioning of electric driven automatic fire booster Pump suitable for automatic 92,297.84 Rupees Ninety Two Set
operation consisting of the following: Horizontal end suction centrifugal pump complete with mechanical seal and including Thousand Two Hundred
necessary arrangement for testing of pump. Squirrel cage induction motor suitable for 415 V, 50 Hz, AC supply of suitable Ninety Seven And Paise
rating for the above pump with synchronous speed of 2900 RPM T.E.F.C. type and conforming to IP:55 and flexible coupling Eighty Four Only
and coupling guard with the pump. Common bed plate of fabricated mild steel channel or cast iron type. Suitable reinforced
cement concrete pump foundation including cushy foot mounting, foundation bolts, washers as required. The pump shall be
of the following specifications: Discharge-450 lpm, Head - 35 m No. of stage preferred - Single / Double Speed RPM -
Material of construction a) Impeller - Bronze b) Casing- C.I. c) Shaft & Shaft Sleeve - SS-410 d) Bearing - Grease Lubicated e)
Seal & Make - Mechanical ,Type of pump - End suction f) H.P.- 7 HP ( 5 KW.) ( Make :- KBL / M & P / GROUNDFOS / KSB.)
364 3.00 Providing and fixing air vessel for fire pumps as per following specifications: Diameter - 250mm, Shell thickness - 8mm, Dish 18,426.44 Rupees Eighteen Thousand Each
ends - 10mm, Height - 1200mm Finishing - Two coats of Red enamel paint of first grade over one coat of primer externally Four Hundred Twenty Six
& two coats of epoxy coating inside Material of Construction - M.S. Test Pressure - 15 Kg./sq.cm., drain arrangmenet with And Paise Forty Four Only
25mm dia. dia gun metal wheel valve with required accessories etc. comp )
365 1.00 Fire Fighting Panel :- Fabrication, supply, Insallation testing & commissioning of Electrical control panel of cubical 2,59,350.83 Rupees Two Lakh(s) Fifty Set
construction, floor mounted type, fabricated out of 2mm thick CRCA sheet, compartmentalised with hinged lockable doors, Nine Thousand Three
dust and vermin proof, powder coated of approved shade after 7 tank treatment process, cable alley, interconnection with Hundred Fifty And Paise
suitable size copper conductor cable/solid copper strip, having switchgears and accessories, mountings and internal wiring, Eighty Three Only
earth terminals, numbering etc. complete in all respect, suitable for main fire pump, pressurisation pump & diesel pump set
complete as per CPWD specification with following in coming and Outgoings, suitable for operation on 415V, 3 phase, 50Hz
Ac Supply with enclosure protection class IP 42 as required : Including feeders earthing and paint shade as per Fire norms
and as per specifications.out going motor feeders to have start/stop on / off /trip indication and current in all the phases. All
out going terminals brought to cable alleys. This panel should be painted in Red shade as per local Fire Officer's norms, if
250A, 50kA 4 Pole MCCB, Ics=100% Icu rating
Digital Voltmeter 0-500V with selector switch
Digital Ammeter (0-250 A) with selector swtich & CTs etc.LED type RYB phase indicating lamps, ON, OFF, trip indicating lamps
Set of Copper Bus Bar 300A( Make:- L & T, Siemens, Schinder, ABB)
Total Quantity Description of Item Rate Rate in word Unit Amount
366 0.00 Main Fire Pump - Rupees Nil -
125 A, 50kA TPN MCCB, Ics=100% Icu, with fully automatic Star/Delta starter suitable for 60 HP pump with overload
protection, current sensing type single phase preventor complete with all acceessories and internal wiring required for
automatic operation, selector switch for local/remote, auto/manual/OFF operation.
63 A, 50kA TPN MCCB, Ics=100% Icu, with suitable HP fully automatic Star/Delta starter with overload protection, current
sensing type single phase preventor complete with all acceessories and internal wiring required for automatic operation,
selector switch for local/remote, auto/manual/OFF operation.
DIESEL ENGINE CONTROL
Control for diesel engine comprising -
Automatic/Manual selctor switch & 3 attempts starting device, timers and relays as required, push buttons, start/stop in
Indicating lamp for high/ Low Lub. Oil pressure, High Water Temp and Engine on indication
Battery charger suitbale for 12V/24 V DC with boost and trickle selector switch, 0-30 V DC volt meter, and 0- 20 A DC
All standard relays and accessories for automatic operation of diesel engine
System Controller
Designing, Supply, Installation, Testing and commissioning of system controller to control operation of main electric fire
pump, diesel pump, Pressurization pump, Terrace pump in sequence as per specification consisting of relays, timers.
Sensors, annunciation window for fault indication, complete as per specification ( Make:- L & T, Siemens, Schinder, ABB)
367 25.00 Providing and laying the PVC insulated & sheathed FRLS Armoured cables of 1.1 K.V. Aluminium Conductor 3 core x 70 389.50 Rupees Three Hundred Metre
sq.mm ) Eighty Nine And Paise Fifty
368 25.00 Providing and laying the PVC insulated & sheathed FRLS Armoured cables of 1.1 K.V. Aluminium Conductor 3 core x 10 155.01 Rupees One Hundred Fifty Metre
sq.mm (cable from pump room to terrace for booster pump) Five And Paise One Only
369 15.00 Providing and laying the PVC insulated & sheathed FRLS Armoured cables of 1.1 K.V. Aluminium Conductor 3 core x 16 207.67 Rupees Two Hundred Metre
sq.mm (cable for jockey pump) Seven And Paise Sixty
370 3.00 Providing and fixing in position cable end termination glands for above mentioned cables 3 core x 70 sq.mm 545.50 Rupees Five Hundred Forty Nos.
Five And Paise Fifty Only
371 3.00 Providing and fixing in position cable end termination glands for above mentioned cables 3 core x 10 sq.mm (cable from 286.16 Rupees Two Hundred Nos.
Booster Pump to terrace Remort Panel ) Eighty Six And Paise Sixteen
372 2.00 Providing and fixing in position cable end termination glands for above mentioned cables 3 core x 16 sq.mm (cable for 207.67 Rupees Two Hundred Nos.
jockey pump) Seven And Paise Sixty
373 2.00 Providing, installation, testing, & commissioning of Remote Panel for fire fighting terrace pump with push buttons for 25,969.47 Rupees Twenty Five No.
manual operation (the remote panel shall be located at ground level) all complete.( Thousand Nine Hundred
Sixty Nine And Paise Forty
Total Quantity Description of Item Rate Rate in word Unit Amount
374 25.00 Supplying, laying and connecting of following size 1.1 kV grade copper conductor armoured control cable on wall or on 87.87 Rupees Eighty Seven And Metre
existing cable tray with clamping, dressing or drawn in existing ducts all as required (For remote panel for fire fighting Paise Eighty Seven Only
terrace pump). 3 core x 6 sq.mm
375 4.00 Providing, installation, testing, & commissioning of pressure switches for Hydrant, Sprinkler, Standby and Jockey pump 1,686.70 Rupees One Thousand Six Each
including necessary wiring upto control panel & other materials.. Hundred Eighty Six And
Paise Seventy Only
376 5.00 Providing and fixing fire retardent / extinguishing electrical insulated synthetic mat of 5mm thick ±10% conforming to latest 1,765.68 Rupees One Thousand Metre
BIS doc no.-ET-02(5440) meeting requirements of IS 3043 / IS 5216 (Part I, II & III), IS 8437 & IEC 479 suitable for all voltages Seven Hundred Sixty Five
not exceeding 3.3 KV AC supply and having minimum width of 1000mm ± 20mm and including supply of required quantity of And Paise Sixty Eight Only
adhsive / compound and fixing the same at site as per site requirement
377 25.00 Fabricating and installing following size of perforated G.I.-pipe cable trays including horizontal and vertical bends, reducers, 363.67 Rupees Three Hundred Metre
tees, cross members and other accessories as required and duly suspended from the ceiling with M.S. suspenders including Sixty Three And Paise Sixty
painting, etc., as required. 150mm width x 50mm depth x 1.6 mm thickness. Seven Only
378 25.00 Providing & fixing 25 mm x 5 mm G.I.-pipe Strip in on surface or in recess for connections etc as required. 124.20 Rupees One Hundred Metre
Twenty Four And Paise
379 15.00 Providing & fixing 25 mm x 5 mm G.I.-pipe Strip in 40 mm dia GI pipe from earth electrode as required 51.67 Rupees Fifty One And Metre
Paise Sixty Seven Only
380 15.00 SUCTION AND DELIVERY PIPES AND VALVES FOR FIRE FIGHTING PUMPS:- Providing and fixing G.I.-pipe -Class- B Medium 293.28 Rupees Two Hundred Metre
Duty suction & delivery headers / pipes for fire fighting pumps (IS. 1239 heavy duty) including all fittings like couplings, Ninety Three And Paise
bends, elbows, offsets, blind flanges, plugs, tees, flanges (flanges as per table E), etc. threaded or welded (all type) joints as Twenty Eight Only
per detailed specfications as required, cutting holes and chases in brick or RCC walls or floors and making good complete
alongwith painting G.I.-pipe pipe with coat of Red Oxide primer and two or more coats of synthetic enamel paint of
approved colour and quality to give an even shade including surface preparation. 15 mm nominal bore
381 25.00 Providing and fixing G.I.-pipe -Class- B Medium Duty suction & delivery headers / pipes for fire fighting pumps (IS. 1239 718.11 Rupees Seven Hundred Metre
heavy duty) including all fittings like couplings, bends, elbows, offsets, blind flanges, plugs, tees, flanges (flanges as per Eighteen And Paise Eleven
table E), etc. threaded or welded (all type) joints as per detailed specfications as required, cutting holes and chases in Only
brick or RCC walls or floors and making good complete alongwith painting G.I.-pipe pipe with coat of Red Oxide primer
and two or more coats of synthetic enamel paint of approved colour and quality to give an even shade including surface
preparation. 25 mm nominal bore
382 35.00 Providing and fixing G.I.-pipe -Class- B Medium Duty suction & delivery headers / pipes for fire fighting pumps (IS. 1239 1,529.14 Rupees One Thousand Five Metre
heavy duty) including all fittings like couplings, bends, elbows, offsets, blind flanges, plugs, tees, flanges (flanges as per Hundred Twenty Nine And
table E), etc. threaded or welded (all type) joints as per detailed specfications as required, cutting holes and chases in Paise Fourteen Only
brick or RCC walls or floors and making good complete alongwith painting G.I.-pipe pipe with coat of Red Oxide primer
and two or more coats of synthetic enamel paint of approved colour and quality to give an even shade including surface
preparation. 80 mm nominal bore
Total Quantity Description of Item Rate Rate in word Unit Amount
383 35.00 Providing and fixing G.I.-pipe -Class- B Medium Duty suction & delivery headers / pipes for fire fighting pumps (IS. 1239 1,735.18 Rupees One Thousand Metre
heavy duty) including all fittings like couplings, bends, elbows, offsets, blind flanges, plugs, tees, flanges (flanges as per Seven Hundred Thirty Five
table E), etc. threaded or welded (all type) joints as per detailed specfications as required, cutting holes and chases in And Paise Eighteen Only
brick or RCC walls or floors and making good complete alongwith painting G.I.-pipe pipe with coat of Red Oxide primer
and two or more coats of synthetic enamel paint of approved colour and quality to give an even shade including surface
preparation. 100 mm nominal bore
384 35.00 Providing and fixing G.I.-pipe -Class- B Medium Duty suction & delivery headers / pipes for fire fighting pumps (IS. 1239 2,659.33 Rupees Two Thousand Six Metre
heavy duty) including all fittings like couplings, bends, elbows, offsets, blind flanges, plugs, tees, flanges (flanges as per Hundred Fifty Nine And
table E), etc. threaded or welded (all type) joints as per detailed specfications as required, cutting holes and chases in Paise Thirty Three Only
brick or RCC walls or floors and making good complete alongwith painting G.I.-pipe pipe with coat of Red Oxide primer
and two or more coats of synthetic enamel paint of approved colour and quality to give an even shade including surface
preparation. 150 mm nominal bore
385 1.00 Providing and fixing G.I.-pipe -Class- B Medium Duty suction & delivery headers / pipes for fire fighting pumps (IS. 1239 6,686.20 Rupees Six Thousand Six Metre
heavy duty) including all fittings like couplings, bends, elbows, offsets, blind flanges, plugs, tees, flanges (flanges as per Hundred Eighty Six And
table E), etc. threaded or welded (all type) joints as per detailed specfications as required, cutting holes and chases in Paise Twenty Only
brick or RCC walls or floors and making good complete alongwith painting G.I.-pipe pipe with coat of Red Oxide primer
and two or more coats of synthetic enamel paint of approved colour and quality to give an even shade including surface
preparation. 200 mm nominal bore (6.0 thick min.)
386 5.00 Providing and fixing cast iron wafer type Butterfly valve of the following size complete with bolts, nuts, washers and 5,460.06 Rupees Five Thousand Nos.
neoprene gaskets as per specifications. 80 mm nominal bore Four Hundred Sixty And
387 10.00 Providing and fixing cast iron wafer type Butterfly valve of the following size complete with bolts, nuts, washers and 7,343.71 Rupees Seven Thousand Nos.
neoprene gaskets as per specifications. 100 mm nominal bore Three Hundred Forty Three
And Paise Seventy One Only
388 5.00 Providing and fixing cast iron wafer type Butterfly valve of the following size complete with bolts, nuts, washers and 9,834.37 Rupees Nine Thousand Nos.
neoprene gaskets as per specifications. 150 mm nominal bore Eight Hundred Thirty Four
And Paise Thirty Seven Only
389 1.00 Providing and fixing cast iron wafer type Butterfly valve of the following size complete with bolts, nuts, washers and 16,410.48 Rupees Sixteen Thousand Nos.
neoprene gaskets as per specifications. 200 mm nominal bore Four Hundred Ten And
Paise Forty Eight Only
Total Quantity Description of Item Rate Rate in word Unit Amount
390 5.00 Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS:5312 complete with 11,971.53 Rupees Eleven Thousand Nos.
rubber gasket, GI bolts, nuts,washers etc.as required : 100 mm nominal bore Nine Hundred Seventy One
And Paise Fifty Three Only
391 3.00 Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS:5312 complete with 8,337.55 Rupees Eight Thousand Nos.
rubber gasket, GI bolts, nuts,washers etc.as required : 80 mm nominal bore Three Hundred Thirty
Seven And Paise Fifty Five
392 5.00 Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS:5312 complete with 19,072.84 Rupees Nineteen Nos.
rubber gasket, GI bolts, nuts,washers etc.as required : 150 mm nominal bore Thousand Seventy Two And
Paise Eighty Four Only
393 1.00 Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS:5312 complete with 31,204.96 Rupees Thirty One Nos.
rubber gasket, GI bolts, nuts,washers etc.as required : 200 mm nominal bore Thousand Two Hundred
Four And Paise Ninety Six
394 2.00 Providing and fixing reinforced Neoprene flexible pipe connectors with all accessories on all pumps delivery.Suitable for 20 4,692.46 Rupees Four Thousand Six Each
Kg/cm2 80mm ( Hundred Ninety Two And
Paise Forty Six Only
395 3.00 Providing and fixing reinforced Neoprene flexible pipe connectors with all accessories on all pumps delivery.Suitable for 20 6,452.13 Rupees Six Thousand Four Each
Kg/cm2 150mm Hundred Fifty Two And
Paise Thirteen Only
396 5.00 Providing and fixing of nickel plated brass / nonferrous alloy fullyway ball valve (minimum working pressure of 20 bar ) with 1,173.12 Rupees One Thousand One NO.
operating handle of approved make. 25 mm nominal bore (Make:- Audco, Kartaar, Zoloto) Hundred Seventy Three
And Paise Twelve Only
397 5.00 Providing and fixing of nickel plated brass / nonferrous alloy fullyway ball valve (minimum working pressure of 20 bar ) with 645.21 Rupees Six Hundred Forty NO.
operating handle of approved make.15 mm nominal bore Five And Paise Twenty One
398 50.00 FIRE HYDRANT SYSTEM(External & Internal) (All Fire Fighting Hardware Should be ISI Mark) :-Providing, fixing, jointing and 718.11 Rupees Seven Hundred Meter
testing heavy quality 'B' class Medium duty G.I. Pipe conforming to IS 3589/IS 1239 for pipes upto 150 mm dia. including Eighteen And Paise Eleven
forged threaded/socked(weldable) i.e. tees, bends, elbows, unions, reducers, draining arrangement, flange joints, rubber Only
insertion, nuts & bolts etc. as required including fixing of pipework on walls, slabs etc. with M. S. supports (duly painted),
adjustible hangers. Note: Joints for pipes and fitttings upto 50 mm diameter shall be threaded joints using Teflon Tape or
equivalent bonding tape on the threads. Joints for pipe and fittings above 50 mm diameter shall be welded joints.Above
ground pipe-with a coat of red oxide primer and two or more coats of synthetic enamel paint of approved colour and
Quality to give an even shade including surface preparation. :- 25 mm dia
Total Quantity Description of Item Rate Rate in word Unit Amount
399 150.00 Providing, fixing, jointing and testing heavy quality 'B' class Medium duty G.I. Pipe conforming to IS 3589/IS 1239 for pipes 1,529.14 Rupees One Thousand Five Meter
upto 150 mm dia. including forged threaded/socked(weldable) i.e. tees, bends, elbows, unions, reducers, draining Hundred Twenty Nine And
arrangement, flange joints, rubber insertion, nuts & bolts etc. as required including fixing of pipework on walls, slabs etc. Paise Fourteen Only
with M. S. supports (duly painted), adjustible hangers. Note: Joints for pipes and fitttings upto 50 mm diameter shall be
threaded joints using Teflon Tape or equivalent bonding tape on the threads. Joints for pipe and fittings above 50 mm
diameter shall be welded joints.Above ground pipe -with a coat of red oxide primer and two or more coats of synthetic
enamel paint of approved colour and Quality to give an even shade including surface preparation.:- 80 mm dia
400 350.00 Providing, fixing, jointing and testing heavy quality 'B' class Medium duty G.I. Pipe conforming to IS 3589/IS 1239 for pipes 1,529.14 Rupees One Thousand Five Meter
upto 150 mm dia. including forged threaded/socked(weldable) i.e. tees, bends, elbows, unions, reducers, draining Hundred Twenty Nine And
arrangement, flange joints, rubber insertion, nuts & bolts etc. as required including fixing of pipework on walls, slabs etc. Paise Fourteen Only
with M. S. supports (duly painted), adjustible hangers. Note: Joints for pipes and fitttings upto 50 mm diameter shall be
threaded joints using Teflon Tape or equivalent bonding tape on the threads. Joints for pipe and fittings above 50 mm
diameter shall be welded joints.Above ground pipe -with a coat of red oxide primer and two or more coats of synthetic
enamel paint of approved colour and Quality to give an even shade including surface preparation.:- 100 mm dia
401 150.00 Providing, fixing, jointing and testing heavy quality 'B' class Medium duty G.I. Pipe conforming to IS 3589/IS 1239 for pipes 2,659.33 Rupees Two Thousand Six Meter
upto 150 mm dia. including forged threaded/socked(weldable) i.e. tees, bends, elbows, unions, reducers, draining Hundred Fifty Nine And
arrangement, flange joints, rubber insertion, nuts & bolts etc. as required including fixing of pipework on walls, slabs etc. Paise Thirty Three Only
with M. S. supports (duly painted), adjustible hangers. Note: Joints for pipes and fitttings upto 50 mm diameter shall be
threaded joints using Teflon Tape or equivalent bonding tape on the threads. Joints for pipe and fittings above 50 mm
diameter shall be welded joints.Above ground pipe-with a coat of red oxide primer and two or more coats of synthetic
enamel paint of approved colour and Quality to give an even shade including surface preparation. :- 150 mm dia (Make:-
402 200.00 Providing and laying of 'B' class Medium duty G.I. Pipe conforming to IS 3589/IS 1239 including all GI/MS fittings like 1,529.14 Rupees One Thousand Five Meter
couplings, bends, elbows, offsets, blind flanges, plugs, tees, flanges (flanges as per table E), etc. threaded or welded (all Hundred Twenty Nine And
type ) joints as per detailed specfications as required, cutting holes and chases in brick or RCC walls or floors and making Paise Fourteen Only
good complete with one coat of 4 mm thick 'PYPKOTE' or COATEK anti rust pipe protection including approved primer &
surface preparation of pipes as per manufacturers specifications and lap of 25 mm to make an impermeable layer on G.I.
Pipes in trenches or underground pipes below soil all complete.Under ground pipe-with a coat of red oxide primer and two
or more coats of synthetic enamel paint of approved colour and Quality to give an even shade including surface
preparation. 80 mm dia(UNDERGROUND)
Total Quantity Description of Item Rate Rate in word Unit Amount
403 250.00 Providing and laying of 'B' class Medium duty G.I. Pipe conforming to IS 3589/IS 1239 including all GI/MS fittings like 1,944.25 Rupees One Thousand Meter
couplings, bends, elbows, offsets, blind flanges, plugs, tees, flanges (flanges as per table E), etc. threaded or welded (all Nine Hundred Forty Four
type ) joints as per detailed specfications as required, cutting holes and chases in brick or RCC walls or floors and making And Paise Twenty Five Only
good complete with one coat of 4 mm thick 'PYPKOTE' or COATEK anti rust pipe protection including approved primer &
surface preparation of pipes as per manufacturers specifications and lap of 25 mm to make an impermeable layer on G.I.
Pipes in trenches or underground pipes below soil all complete.Under ground pipe-with a coat of red oxide primer and two
or more coats of synthetic enamel paint of approved colour and Quality to give an even shade including surface
preparation. 100 mm dia(UNDERGROUND)
404 150.00 Providing and laying of 'B' class Medium duty G.I. Pipe conforming to IS 3589/IS 1239 including all GI/MS fittings like 2,659.33 Rupees Two Thousand Six Meter
couplings, bends, elbows, offsets, blind flanges, plugs, tees, flanges (flanges as per table E), etc. threaded or welded (all Hundred Fifty Nine And
type ) joints as per detailed specfications as required, cutting holes and chases in brick or RCC walls or floors and making Paise Thirty Three Only
good complete with one coat of 4 mm thick 'PYPKOTE' or COATEK anti rust pipe protection including approved primer &
surface preparation of pipes as per manufacturers specifications and lap of 25 mm to make an impermeable layer on G.I.
Pipes in trenches or underground pipes below soil all complete.Under ground pipe :- 150 mm dia(UNDERGROUND)with a
coat of red oxide primer and two or more coats of synthetic enamel paint of approved colour and Quality to give an even
shade including surface preparation.
405 24.00 Providing and fixing S.S landing valve conforming to IS -5290 with 63 mm dia instantaneous female coupling on the outlet 6,698.32 Rupees Six Thousand Six Each
with S.S. orifice flange 6 mm thick as required to maintain 3.5 Kg/sq.cm., blank cap and chain, necessary companion Hundred Ninety Eight And
flanges ( as per table "E") nuts, bolts, washer and gasket complete as per specification. (ISI marked) Single outlet ( Paise Thirty Two Only
406 24.00 Providing and fixing first aid fire hose reel drum wall mounting, swinging type fitted with 20 mm dia 30.0 m long high 9,534.40 Rupees Nine Thousand Each
pressure hose to I.S. 5132 with 25 mm outlet gunmetal nozzle with shut off valve (I.S. 884-1969). Name of Five Hundred Thirty Four
Manufacturer should be embossed on the drum. And Paise Forty Only
407 24.00 Providing and fixing 63 mm dia 15m long EPDM lined fabric lined hose including SS male and female instantaneous type 4,713.67 Rupees Four Thousand Each
coupling approved by fire authority, machine wound with copper wire complete in all respects.Hose shall conform to IS 636 Seven Hundred Thirteen
TypeII and coupling to IS 903 -1975 (ISI marked) And Paise Sixty Seven Only
408 24.00 Providing and fixing standard short size SS branch pipe with gunmetal nozzle 20 mm dia outlet with standard 3,436.02 Rupees Three Thousand Each
instantaneoustype 63 mm dia coupling. (conform to IS-903). Four Hundred Thirty Six
And Paise Two Only
409 24.00 Providing and fixing standard fireman's axe ( tested for 20000 Volts) with heavy insulated rubber handle.( ISI marked)( 1,114.46 Rupees One Thousand One Each
Hundred Fourteen And
Paise Forty Six Only
410 15.00 Providing and fixing gunmetal single acting air release valve with screwed inlet 25 mm dia. . 2,463.54 Rupees Two Thousand Each
Four Hundred Sixty Three
And Paise Fifty Four Only
411 24.00 Providing and fixing brass ball valve (full bore type) with plastic coated lever and screwed female ends tested to 20 Kg/ 1,114.46 Rupees One Thousand One Each
cm2 of approved quality as specified.20mm . Hundred Fourteen And
Paise Forty Six Only
412 24.00 Providing and fixing brass ball valve (full bore type) with plastic coated lever and screwed female ends tested to 20 Kg/ 1,466.39 Rupees One Thousand Each
cm2 of approved quality as specified. 25 mm dia . Four Hundred Sixty Six And
Paise Thirty Nine Only
Total Quantity Description of Item Rate Rate in word Unit Amount
413 24.00 Providing and fixing door with frame for all internal fire hydrants fabricated from 16 SWG Alumunim of size 750 x 1200 13,490.82 Rupees Thirteen Thousand Each
x2100 mm double door including 2 nos allen key lock for locking along with padlock arrangement & fully glazed with 4 mm Four Hundred Ninety And
thick float glass approved by local Fire Authority, stove enameled fire red finish with " fire hose' written on front suitable to Paise Eighty Two Only
house 15 mm long four length of canvas hose with couplings,one no of branch pipe, one fire mans axe and two numbers of
portable extinguishers, first aid fire hose and supports for hoses, branch pipes, Axe and hose reel. as per approved design
including necessary fixing arrangement for hoses & axe and branch pipe.) FOR INTERNAL.
414 24.00 Providing and fixing dial type pressure gauge with isolation cock and chrome coated copper pipe at hydrant station. Dial 1,173.12 Rupees One Thousand One Each
diameter 100 mm calebration 0-15 kg/ sq.cm.. Hundred Seventy Three
And Paise Twelve Only
415 24.00 Providing and fixing cast iron wafer type Butterfly valve -PN-1.6-of the following size complete with bolts, nuts, washers and 5,460.06 Rupees Five Thousand Each
neoprene gaskets as per specifications. 80 mm dia Four Hundred Sixty And
416 4.00 Providing and fixing cast iron wafer type Butterfly valve-pn-1.6- of the following size complete with bolts, nuts, washers and 9,834.37 Rupees Nine Thousand Each
neoprene gaskets as per specifications. 150 mm dia Eight Hundred Thirty Four
And Paise Thirty Seven Only
417 4.00 Providing and fixing cast iron dual plate wafer type non return valves. 150 mm dia 19,072.84 Rupees Nineteen Each
Thousand Seventy Two And
Paise Eighty Four Only
418 2.00 Providing and fixing gunmetal fire brigade inlet head as per IS:904 Specification tested for 20 Kg/cm2 with 63 mm dia 7,334.62 Rupees Seven Thousand No.
instantaneous type inlet and 150mm dia. flanged outlet with built-in check valve for fire brigade connection to under Three Hundred Thirty Four
ground tanks and fire risers including campanion flanges as pertable " E" including nuts, bolts & washers etc. Four way And Paise Sixty Two Only
419 2.00 Providing and fixing gunmetal fire brigade inlet head as per IS:904 Specification tested for 20 Kg/cm2 with 63 mm dia 14,968.20 Rupees Fourteen No.
instantaneous type inlet and 150mm dia. flanged outlet with built-in check valve for fire brigade connection to under Thousand Nine Hundred
ground tanks and fire risers including campanion flanges as pertable " E" including nuts, bolts & washers etc. Two way ( Sixty Eight And Paise
420 2.00 Providing and fixing suction coupling for fire brigade drawl of water from tank with 150 mm dia GI (Medium) pipe and foot 26,395.09 Rupees Twenty Six Each
valve . ) Thousand Three Hundred
Ninety Five And Paise Nine
421 8.00 Providing, fixing ,testing and commissioning external (yard) hydrant "STAND-POST" type conforming to IS:908-1975 and 6,698.32 Rupees Six Thousand Six Each
comprising of stand post for single outlet of hot diped class ' C' G.I.-pipe Pipe of 100 mm dia at the with instantaneous Hundred Ninety Eight And
spring lock type Stainless steel female coupling of 63 mm dia for connecting to hose pipe, single headed SS valves Paise Thirty Two Only
conforming to type A of IS: 5290-1977, GI tee tapping from underground mains, flange riser and any other accessories etc.
as per specification complete as required. (
Total Quantity Description of Item Rate Rate in word Unit Amount
422 24.00 Providing and fixing fire hose cabinet fabricated from 16 gauge M.S.sheet with locking arrangement and hanging 5,064.52 Rupees Five Thousand Each
arrangement for accessories painted "Fire Red" with Stove enameled paint "Fire Hose" written on front including suitable Sixty Four And Paise Fifty
supports to place 900 mm above ground level properly anchored, approximately size 800 X 600 X 250 mm deep (to house Two Only
two lengths of canvas hose with couplings, branch pipe with nozzle for external hydrants) FOR EXTERNAL.
423 400.00 SPRINKLER SYSTEM :- Providing and fixing 'B' class Medium duty G.I. Pipe conforming to IS 3589/IS 1239 complete with GI / 718.11 Rupees Seven Hundred Meter
MS fittings like couplings, bends, elbows, tees, offsets,reducers, flanges as per table 'E' etc. including cutting and making Eighteen And Paise Eleven
good the walls complete.Pipes upto 50 mm dia threaded joint with holdtite, 65 mm dia and above should be welded joint Only
(all type).with one coat of red oxide primer and two or more coats of synthetic enamel paint of approved colour to give an
even shade including surface preparations. :- 25 mm dia
424 125.00 Providing and fixing 'B' class Medium duty G.I. Pipe conforming to IS 3589/IS 1239 complete with GI / MS fittings like 792.85 Rupees Seven Hundred Meter
couplings, bends, elbows, tees, offsets,reducers, flanges as per table 'E' etc. including cutting and making good the walls Ninety Two And Paise
complete.Pipes upto 50 mm dia threaded joint with holdtite, 65 mm dia and above should be welded joint (all type).with Eighty Five Only
one coat of red oxide primer and two or more coats of synthetic enamel paint of approved colour to give an even shade
including surface preparations. :-32 mm dia
425 200.00 Providing and fixing 'B' class Medium duty G.I. Pipe conforming to IS 3589/IS 1239 complete with GI / MS fittings like 975.66 Rupees Nine Hundred Meter
couplings, bends, elbows, tees, offsets,reducers, flanges as per table 'E' etc. including cutting and making good the walls Seventy Five And Paise
complete.Pipes upto 50 mm dia threaded joint with holdtite, 65 mm dia and above should be welded joint (all type).with Sixty Six Only
one coat of red oxide primer and two or more coats of synthetic enamel paint of approved colour to give an even shade
including surface preparations. :-40 mm dia
426 150.00 Providing and fixing 'B' class Medium duty G.I. Pipe conforming to IS 3589/IS 1239 complete with GI / MS fittings like 1,076.66 Rupees One Thousand Meter
couplings, bends, elbows, tees, offsets,reducers, flanges as per table 'E' etc. including cutting and making good the walls Seventy Six And Paise Sixty
complete.Pipes upto 50 mm dia threaded joint with holdtite, 65 mm dia and above should be welded joint (all type).with Six Only
one coat of red oxide primer and two or more coats of synthetic enamel paint of approved colour to give an even shade
including surface preparations. :-50 mm dia
427 75.00 Providing and fixing 'B' class Medium duty G.I. Pipe conforming to IS 3589/IS 1239 complete with GI / MS fittings like 1,343.30 Rupees One Thousand Meter
couplings, bends, elbows, tees, offsets,reducers, flanges as per table 'E' etc. including cutting and making good the walls Three Hundred Forty Three
complete.Pipes upto 50 mm dia threaded joint with holdtite, 65 mm dia and above should be welded joint (all type).with And Paise Thirty Only
one coat of red oxide primer and two or more coats of synthetic enamel paint of approved colour to give an even shade
including surface preparations. :-65 mm dia
Total Quantity Description of Item Rate Rate in word Unit Amount
428 75.00 Providing and fixing 'B' class Medium duty G.I. Pipe conforming to IS 3589/IS 1239 complete with GI / MS fittings like 1,529.14 Rupees One Thousand Five Meter
couplings, bends, elbows, tees, offsets,reducers, flanges as per table 'E' etc. including cutting and making good the walls Hundred Twenty Nine And
complete.Pipes upto 50 mm dia threaded joint with holdtite, 65 mm dia and above should be welded joint (all type).with Paise Fourteen Only
one coat of red oxide primer and two or more coats of synthetic enamel paint of approved colour to give an even shade
including surface preparations. :-80 mm dia
429 75.00 Providing and fixing 'B' class Medium duty G.I. Pipe conforming to IS 3589/IS 1239 complete with GI / MS fittings like 1,944.25 Rupees One Thousand Meter
couplings, bends, elbows, tees, offsets,reducers, flanges as per table 'E' etc. including cutting and making good the walls Nine Hundred Forty Four
complete.Pipes upto 50 mm dia threaded joint with holdtite, 65 mm dia and above should be welded joint (all type).with And Paise Twenty Five Only
one coat of red oxide primer and two or more coats of synthetic enamel paint of approved colour to give an even shade
including surface preparations. :-100 mm dia
430 1.00 Providing and fixing 'B' class Medium duty G.I. Pipe conforming to IS 3589/IS 1239 complete with GI / MS fittings like 2,659.33 Rupees Two Thousand Six Meter
couplings, bends, elbows, tees, offsets,reducers, flanges as per table 'E' etc. including cutting and making good the walls Hundred Fifty Nine And
complete.Pipes upto 50 mm dia threaded joint with holdtite, 65 mm dia and above should be welded joint (all type).with Paise Thirty Three Only
one coat of red oxide primer and two or more coats of synthetic enamel paint of approved colour to give an even shade
including surface preparations. :-150 mm dia
431 75.00 Providing and fixing 15 mm gunmetal sprinkler head with quartz bulb and set to operate at specified temperature 604.99 Rupees Six Hundred Four Nos
pendent/ upright/ side wall as per instruction and fixing with loctite. Pendent Type 68 C And Paise Ninety Nine Only
432 15.00 Providing and fixing 15 mm gunmetal sprinkler head with quartz bulb and set to operate at specified temperature 705.99 Rupees Seven Hundred Nos
pendent/ upright/ side wall as per instruction and fixing with loctite. Side Wall Type 68 C Five And Paise Ninety Nine
433 15.00 Providing and fixing 15 mm gunmetal sprinkler head with quartz bulb and set to operate at specified temperature 604.99 Rupees Six Hundred Four Nos
pendent/ upright/ side wall as per instruction and fixing with loctite. Upright Type 68 C And Paise Ninety Nine Only
434 75.00 Rossete Plate:-Providing, installation, testing & commissioning of 266.64 Rupees Two Hundred Sixty Nos
adjustable rosette plate for 15mm dia in white finish UL Six And Paise Sixty Four
Listed or FM approved complete as required. Only
435 15.00 Supplying, installation, testing & commissioning of sprinkler flexible pipe (UL Listed) of stainless steel complete with 15 NPT 1,818.00 Rupees One Thousand Nos
on reducer thread with maximum working pressure of 175 PSI test pressure of 875 PSI (Burst) with branch line (Inlet) 25mm Eight Hundred Eighteen
NPT male thread to sprinkler head (Outlet) 15mm NPT female thread with reducer, nipple, 2 side brackets, center bracket, Only
stockbar of following sizes complete as required.1200mm
436 3.00 Providing & fixing 25mm dia gunmetal inspecting & testing assembly with ball valve(3 nos.), gunmetal sight glass, by pass 3,636.00 Rupees Three Thousand Each
valve & connected to drain line. ( Six Hundred Thirty Six Only
437 6.00 Providing and fixing brass ball valve full bore type with plastic coated lever approved quality, tested to 20 Kg.cm.sq. 40 mm 4,105.65 Rupees Four Thousand Each
dia One Hundred Five And
Paise Sixty Five Only
438 6.00 Providing and fixing brass ball valve full bore type with plastic coated lever approved quality, tested to 20 Kg.cm.sq. 50 mm 4,458.14 Rupees Four Thousand Each
dia ( Four Hundred Fifty Eight
And Paise Fourteen Only
Total Quantity Description of Item Rate Rate in word Unit Amount
439 15.00 Providing and fixing cast iron wafer type Butterfly valve-PN-1.6- of the following size complete with bolts, nuts, washers and 6,733.67 Rupees Six Thousand Each
neoprene gaskets as per specifications. :- 100 mm nominal bore ( Seven Hundred Thirty
Three And Paise Sixty
440 6.00 Providing and fixing cast iron wafer type Butterfly valve -PN-1.6-of the following size complete with bolts, nuts, washers and 7,343.71 Rupees Seven Thousand Each
neoprene gaskets as per specifications. :- 65 mm nominal bore ( Three Hundred Forty Three
And Paise Seventy One Only
441 2.00 Providing and fixing electricaly operated flow indicating switches model System Sensor in sprinkler branch line on each 8,149.69 Rupees Eight Thousand Each
floor with necessary junction box installed in accessible place (Wiring from switches to panel and stair case pressurisation One Hundred Forty Nine
not included) :- 100 mm dia And Paise Sixty Nine Only
442 4.00 Providing and fixing dial type pressure gauge with isolation cock and copper pipe on main header Dial diameter 100 mm 1,173.62 Rupees One Thousand One Each
celebration 0-15 / sq. cm. Hundred Seventy Three
And Paise Sixty Two Only
443 4.00 Providing and fixing 25 mm dia single acting air release valve with screwed inlet.. 2,463.39 Rupees Two Thousand Each
Four Hundred Sixty Three
And Paise Thirty Nine Only
444 1.00 Providing and fixing cast iron dual plate wafer type non return valves. :- 150 mm dia . 19,072.84 Rupees Nineteen Each
Thousand Seventy Two And
Paise Eighty Four Only
445 4.00 Providing and fixing cast iron dual plate wafer type non return valves.:- 100 mm dia . 11,971.53 Rupees Eleven Thousand Each
Nine Hundred Seventy One
And Paise Fifty Three Only
446 1.00 Providing, Installation, testing and commissioning of Control Valve inclusive of: - 150 mm dia butterfly Valve,Alarm Valve 51,313.05 Rupees Fifty One Each
with Water Motor Gong, Pressure gauge and other miscellaneous Valves and fittings as required. Thousand Three Hundred
Thirteen And Paise Five
447 4.00 Fire Resistant Door Double Leaf Hinge Type (2 Hour Fire Rated) 1.00 mm thick GI Sheet cladded 40mm thick shutter 25,138.90 Rupees Twenty Five No
complete with GI frame (Single Ribet – Frame Profile 100 x 57mm) made from 1.20mm thick GI Sheet & Fixing arrangements Thousand One Hundred
AS PER BS 476 PART- 20 & 22 & IS: 3614 Part - II for Integrity, Stability.Door Size: 2000mm (W) x 2100mm (H) Including Thirty Eight And Paise
below Accessories S.S. Ball Bearing Hinges- 6 Nos Vision Panel with Fire Glass of Size: 200 x 300mm - 2 Nos Heavy Duty Door Ninety Only
Closer - 2 Nos Heavy Duty Door Closer - 2 Nos Panic Exit Device for Double Leaf Door - 1 No. External Trim Bar (Panic Latch) -
448 30.00 HAND APPLIANCES :- Providing and fixing ABC type fire extinguishers consisting of welded MS cylindrical body, squeeze lever 5,279.27 Rupees Five Thousand Two Each
discharge valve fitted with pressure indicating gauge internal discharge tube, 30 cms long high pressure discharge hose, Hundred Seventy Nine And
discharge nozzle, suspension bracket, conforming to ISI finished externally with red enamel paint and fixed to wall with Paise Twenty Seven Only
brackets complete with internal charge. Capacity 6.0 kg. I.S.I. Marked.(
449 2.00 Providing and fixing Trolley type foam fire extinguishers cap. 50 liters. 50 litres capacity 16,101.42 Rupees Sixteen Thousand Each
One Hundred One And
Paise Forty Two Only
Total Quantity Description of Item Rate Rate in word Unit Amount
450 30.00 Providing and fixing in position Co2 gas type fire extinguishers of 4.5 kg. capacity each.( 6,451.88 Rupees Six Thousand Four Nos.
Hundred Fifty One And
Paise Eighty Eight Only
451 2.00 Providing and fixing Trolley type Co2 gas fire extinguishers cap. 9 liters will be provided for transformer area.( 7,625.50 Rupees Seven Thousand Nos.
Six Hundred Twenty Five
And Paise Fifty Only
452 25.00 Providing and keeping in position standard sand buckets filled with clean sand and painted red from outside at various 935.26 Rupees Nine Hundred Nos.
places.( Thirty Five And Paise
Twenty Six Only
453 25.00 Providian’s Escape Sigane:- Photoluminescent rigid plastic, 2mm thickness, printed on high quality glass paint with UV 2,545.20 Rupees Two Thousand Five Nos.
resistance, 5 year warranty, material used-non radioactive, non-phophorous, non toxic and lead free. Available in different Hundred Forty Five And
types & sizes, time after removing the light source (in minutes):- 60 minutes, luminescent intensity(milicandelas*per square Paise Twenty Only
meter-mcd/sqm):30 mcd/sqm. Luminescent intensity greater than 0.32 mcd/sqm, period of light decay* (in minutes) :3100
(1) “Fire Exits” ( Size 365 x 119 x 84 mm or nearest )
454 25.00 (2)Fire exit signs of standard size ( Size 450 x 200 x 84 mm or nearest ) (photoluminous type.(glowing in dark type)Providing 4,675.29 Rupees Four Thousand Six Nos.
and fixing portable fire extinguishers of approved make ISI marked of following Capacity at the places shown on Drawing & Hundred Seventy Five And
mentioned in CFO letter . Paise Twenty Nine Only
455 25.00 Providing, fixing, testing and commissioning of below Auto Glow Signages. In Case of Fire do not use Lift ,Use Staircase 8"x 8" 935.26 Rupees Nine Hundred Nos.
Thirty Five And Paise
Twenty Six Only
456 20.00 ADDITIONAL WORK:- Core Cutting in RCC wall, beam, columns and roof as required locations of required size & depth and 675.69 Rupees Six Hundred Nos.
repairing , making it goods complete . Size 40mm to 80mm dia ( avarge depth 200) Seventy Five And Paise
Sixty Nine Only
457 10.00 Core Cutting in RCC wall, beam, columns and roof as required locations of required size & depth and repairing , making it 1,297.85 Rupees One Thousand Two Nos.
goods complete :- Size 100mm to 200mm dia ( avarge depth 200) Hundred Ninety Seven And
Paise Eighty Five Only
458 4.00 Providing and fixing cast iron following size complete with bolts, nuts, washers and neoprene gaskets as per specifications. 6,707.41 Rupees Six Thousand Nos.
100mm dia y strainer in main suction header Seven Hundred Seven And
Paise Forty One Only
459 4.00 Supply & fixing of testing and commissioning of stainless steel Y-strainer fabricated out of 1.6mm thickness steel, grade 304, 11,255.44 Rupees Eleven Thousand Nos.
sheet with 3mm dia holes with stainless steel flange. 150mm dia. Size Two Hundred Fifty Five And
Paise Forty Four Only
460 25.00 Supply & fixing of testing and commissioning of Orifice plate made out of 6mm thick stainless steel Grade-304, with orifice 1,334.21 Rupees One Thousand Nos.
of required size to be fitted between flange & landing valve of external & internal hydrants to reduce pressure at the outlet Three Hundred Thirty Four
to the level of 3.5 kg. cm2 complete as required. And Paise Twenty One Only
Total Quantity Description of Item Rate Rate in word Unit Amount
461 3.00 Earthing with G.I.-pipe earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with 7,011.42 Rupees Seven Thousand Nos.
cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required. Eleven And Paise Forty Two
462 3.00 Earthing with G.I.-pipe earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry 11,427.14 Rupees Eleven Thousand Nos.
enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt Four Hundred Twenty
as required. Seven And Paise Fourteen
463 1.00 Costing for Liasion work with authority and obtaining Pre & Final NOC and all relevant applicable approvals including 1,17,311.50 Rupees One Lakh(s) Lot
required drawing work. Seventeen Thousand Three
Hundred Eleven And Paise
464 1.00 Designing (hydraulic, process, structural and aesthetic), constructing and commissioning of Activated Sludge Process based 1,19,03,571.14 Rupees One Crore Complete
Treatment Plant. Extended Aeration Process and its variants without primary clarification, is preferred for STP capacities less Nineteen Lakh(s) Three set
than 10 MLD. Scope of work consists of all Civil, Mechanical, Electrical, instrumentation components of various sub-works as Thousand Five Hundred
given below including necessary hydraulic testing, structural testing, equipment testing, trial run for 3 months, etc. complete Seventy One And Paise
as directed by Engineer-in-charge (turn-key job), to achieve BOD < 20ppm, TSS < 30 ppm, to meet GPCB standard of inland Fourteen Only
surface water discharge. The Coagulant Dosing System shall be provided, if required.Fixed cost up to and including up to
Total Quantity Description of Item Rate Rate in word Unit Amount
465 1.00 Connection charges for Electricity supplying company including necessary liaison work & paying of the other charges for 202000 Rupees Two Lakh(s) Two complete
getting the new connection at project site Thousand Only JOB
I/ We am/ are willing to carry out the work .........% above/ below percent ( should be written in figures and words ) of the estimated rates mentioned above. Amount of my / our tender work out as under.
* Estimated amount Put to tender
Add/Deduct__________________% above / below
All works shall be carried out as per Punlic Work Department and other specification of division or as directed.
All the columns in schedules should be filled in ink and the total of the entries ink last column should be struck by the contractor under his signature.
3 Rates quoted include clearance of site ( prior commncement of work and its close). In all respect and hold good for work under all condition,site,moisture,weather etc.
4 Servicable materials available after Demolishing / Dismentalling any item should be hand over to the concerned as per instruction of PIU engineer in charge.
5 To be continued on additional sheets,if found necessary.
Dy. Executive Engineer Executive Engineer
PIU Navsari PIU Navsari
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
01-Make List-4171-06-10-2017.pdf
02-Make List - Civil Items-05-02-2020.pdf
Condition for cement.pdf
GR RnB Revise.pdf
GR-TMT-Lap Length.pdf
INSTRUCTIONS TO PERSON TENDERING.jpg
JPG
Performance Bond and SD-Paripatra-2023.pdf
PIU SPECIAL CONDITIONS.pdf
Inclusion of Insurance clause as per new SBD.pdf
6372 Make List HO 15.10.2025.pdf
Performance Bond and Bitumen date.pdf
0.SITE PLAN _VANSADA.pdf
1. C TYPE _VANSADA.pdf
2.E TYPE _VANSADA.pdf
02 Building-Specification.pdf
03 Electrical Specification.pdf
04 fire technical specification.pdf
05 _ fire Special Condition of Contract.pdf
Special Condition for Site office.pdf
Detail Specification.pdf
SBD.pdf
Tender Document.pdf
Schedule B.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .