COVERING OF DRAINS AND UTILITY DUCTS AT PLOT NO SC 01 AND SC 02 IN SECTOR-150 NOIDA

Fabrication & Manufacturing of Prestressed Hollow Core slab (Hollow area 25 to 30%) of different thickness & modular width 1200 mm in Controlled Factory Environment with approved methodology confirming to IS 10297:1982 by using long line casting method having arrangement of proper steel bed. Concreting should be done by batch mixing plant capable of producing zero slump concrete.transported through automatic shuttels of standard make & layed on bed with the help of extruder/Slipformer, finishing, curing and also provision of steam curing. Cutting, making necessary cutout/holes of required sizes for services in slab element after achieving required strength, yard handling & stacking all complete as per approved shop drawings & design mix as per the direction of the Engineer-in-charge. Note: Excess/less cement over the specified cement content used as per design mix is payable/recoverable separately) 26.73.1.4 200mm thick hollow core slab

Fabrication & Manufacturing of Prestressed Hollow Core slab (Hollow area 25 to 30%) of different thickness & modular width 1200 mm in Controlled Factory Environment with approved methodology confirming to 15 10297:1982 by using long line casting method having arrangement of proper steel bed. Concreting should be done by batch mixing plant capable of producing zero slump concrete, transported through automatic shuttels of standard make & layed on bed with the help of extruder/Slipformer, finishing, curing and also provision of steam curing. Cutting, making necessary cutout/holes of required sizes for services in slab element after achieving required strength, yard handling & stacking all complete as per approved shop drawings & design mix as per the direction of the Engineer-in-charge. (Cost of strands should be paid separately). Note: Excess/less cement over the specified cement content used as per design mix is payable/recoverable separately) including steel & Transport charge. 150 mm thick hollow core slab

Erection & Installation of Precast/Prestressed Concrete elements in correct & Final position with proper line level and plumb at site making all arrangemonts (le cranes,Push pull jacks & all another T & P for lifting Placing & Allignment of elements, Within Erection tolerance as per IS 15916 as per approved shop Drawing and all Complete as per the Direction of Engineer-in-Charge but excluding the cost of sim pads, non shrink grout and stool works le hangers. All work up to fifth floor. Prestressed Hollow Core Slab upto 200 mm Thickness.