Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.3 LAccepted-AOC V P O SEHAL TEHSIL BAIJNATH DISTT KANGRA H P | MANDI | HIMACHAL PRADESH | 175013 | ₹2.3 L Quoted ₹2.7 L | L1 | Accepted-AOC lowest 1 |
| 2 | L2₹2.9 L+₹24,650 (9.25%)Rejected-AOC | ₹2.9 L+₹24,650 (9.25%) | L2 | Rejected-AOC not lowest 1 |
| 3 | L3₹3.2 L+₹53,650 (20.1%)Rejected-AOC VILLAGE VILLAGE TEHSIL BAIJNATH DISTRICT KANGRA | MANDI | HIMACHAL PRADESH | 175013 | ₹3.2 L+₹53,650 (20.1%) | L3 | Rejected-AOC not lowest 1 |
| Sl No | Description | Qty | Unit | Sunny Kapoor L1 | GALAXY ASSOCIATE L2 | AMIT CHOUDHARY L3 |
|---|---|---|---|---|---|---|
| 1.00 | Providing and Supplying of 5 HP submerssible motor of KSB/Kirloskar/Hindustan/KSB/Lubi make comprising to latest relevant BIS Code. The pump should be fitted with Noryl Impeller of suitable alloys as per BIS:8034-1976 latest suitable for Clear water having greased packed bearings and shaft with wound stator on motor side and with shaft protection sleave on pump side ensuring better life for shaft confirming to BIS specification. The pump shall be directly coupled to a submersible squirrel cage electric induction motor of 5 HP, 2900 RPM of reputed make conforming to BIS 9238-1979 latest with upto date amendments. Totally dust and water proof for submersible duty isolated from the pump by intermed into casing with double mechanical seal in oil chamber and grease packed lubricated bearings and provided with stainless steel thrust bearing plate to with standing vertical loads with minimum wear and tear. It should also be fitted with a device to take up expansion of water with the heating of motor. The pump set should include water level guard errection clamps , cable clips, dry running protectin etc. and suitable operation on data given below. Total Head = 46.54 meters. Discharge=4.50 LPS | 1 | set | 85,000 ₹85,000 Lowest | 85,500 ₹85,500 | 85,800 ₹85,800 |
| 2.00 | Providing and Supplying of fully automatic (auto start, auto stop) Heavy duty design for 5 HP submersible pumsets - Schneider starter, Gic make SPP, Motor duty including Timers, Relay, Auto Contactors, MCB, LED IND. Lights, Incoming & Outgoing power Terminals complete and other allied acessories complete in all respects | 1 | Each | 39,000 ₹39,000 Lowest | 39,500 ₹39,500 | 40,200 ₹40,200 |
| 3.00 | Porviding and laying suitable size 6 mm sq. copper 3 core cable conforming to BIS 7098 (part-I) 1988 of latest with upto date ammendments sieman/ closter /ICC make from starter to motor of HPSEB to MCB and From MCB to BUS bar switch and starter and motor of appropriate size including all other electrical equpment/ accessories such as thimble , flexible pipe solder, nuts and bolsts, cable glands, etc laid in pipes of trenches under floor . The Type size and make will be subject to approval of HPSEB authories. | 55 | Rmt | 1,050 ₹57,750 Lowest | 1,200 ₹66,000 | 1,500 ₹82,500 |
| 4.00 | Supply of Kirloskar/leader make Cast iron double flanged reflux valve PN-1.6 sluice valve of 80 milimetre dia confirming to BIS-780-1984 (to be provided on rising main side) capable of with standing nominal seat test pressure of 21 kg/cm². in all leads and lifts and to the entire satisfaction of Engineer-In-Charge. | 1 | Each | 19,000 ₹19,000 Lowest | 19,800 ₹19,800 | 20,500 ₹20,500 |
| 5.00 | Welding,lowering and fixing of GI pipe 80 mm dia ( M ) P.E. with M.S.flanges submerssible cut type complete in all respect as per satisfaction of Engineer-in-charge. | 40 | Rmt | 750 ₹30,000 Lowest | 950 ₹38,000 | 1,150 ₹46,000 |
| 6.00 | Providing and fixing double loop earthing and G.I. plate 600mmx600mmx3mm thick electrodecomplete with material such as thimbles, nuts and bolts, charcoal and common salt, 25mmx6mmG.I. strips & G.I. wire as per IS: 3043-1987 with up to date amendments for motors and otherelectrical equipments and digging of pits etc. complete in all respect. | 1 | Job | 12,000 ₹12,000 Lowest | 13,500 ₹13,500 | 15,200 ₹15,200 |
| 7.00 | Errection of all items appearing at sr. No. 1 to 4 including cost of tee, taper, and any other fitting with flanges required as per site condition and as per direction of Engineer in charge. | 1 | Job | 16,000 ₹16,000 Lowest | 19,000 ₹19,000 | 19,500 ₹19,500 |
| 8.00Laying , jointing and testing in trenches galvanised mild steel pipe (to be levelled to grade of pipes ) flanged pipes with 5% flanged joints with circumfrential butt welded joints and remaining 95% with butt welding including cost of bends complete conforming to IS : 1239 -1990 (Part-I) with latest up to date ammendments of grade and wall thickness as specified below, suitable to with standing hydroulic test pressure in random length 4 mtr to 6 mtr with plain ends and joined with MS flanges conforming to IS:6392-1971 (latest up to date amendments ) and welding of flanges with pipes as per IS 816-1967 including required Nos. and size of M.S. nut and bolts as per IS : 1369-197 and compressed asbestos fiber jointing gaskets sheet not less than 3mm thick as per IS :2712-1965. The welding of flanges to be done on both faces in two layers to make the joints leak proof and to be entire satifications of the Engineer-in-charge. The laying of pipes should be conformed to IS :-5822-1994 and as per CPHEEO mannual and will include all conditions such as welding cutting and jointing including flushing, cleaning and hydraulic testing complete in all respect (earth work in trenches, to be measured and paid seprately ) | ||||||
| 9.00 | 80 mm dia (M) PE | 15 | Rmt | 510 ₹7,650 Lowest | 650 ₹9,750 | 690 ₹10,350 |
Tender Value
₹2.3 L
EMD Value
₹5,776
Closing Date
22 Sept 2025, 5:00 pmClosed
Executive Engineer JSV Division Jaisinghpur
O/O The Executive Engineer JSV Division Jaisinghpur
Restoration of Rain Damages of LWSS Upper Lambagaon in Tehsil Jaisinghpur Distt. Kangra HP
2025_HPIPH_114503_1
8261-8346 dated 10.09.2025
Open Tender
Electrical Works
Item Rate
90 days
Restoration of Rain Damages of LWSS Upper Lam
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
Executive Engineer JSV Division Jaisinghpur
₹5,776
12 Jun 2026
11 Sept 2025
23 Sept 2025
11 Sept 2025
22 Sept 2025
11 Sept 2025
Amount
Providing and Supplying of 5 HP submerssible motor of KSB/Kirloskar/Hindustan/KSB/Lubi make comprising to latest relevant BIS Code. The pump should be fitted with Noryl Impeller of suitable alloys as per BIS:8034-1976 latest suitable for Clear water having greased packed bearings and shaft with wound stator on motor side and with shaft protection sleave on pump side ensuring better life for shaft confirming to BIS specification. The pump shall be directly coupled to a submersible squirrel cage electric induction motor of 5 HP, 2900 RPM of reputed make conforming to BIS 9238-1979 latest with upto date amendments. Totally dust and water proof for submersible duty isolated from the pump by intermed into casing with double mechanical seal in oil chamber and grease packed lubricated bearings and provided with stainless steel thrust bearing plate to with standing vertical loads with minimum wear and tear. It should also be fitted with a device to take up expansion of water with the heating of motor. The pump set should include water level guard errection clamps , cable clips, dry running protectin etc. and suitable operation on data given below. Total Head = 46.54 meters. Discharge=4.50 LPS
Providing and Supplying of fully automatic (auto start, auto stop) Heavy duty design for 5 HP submersible pumsets - Schneider starter, Gic make SPP, Motor duty including Timers, Relay, Auto Contactors, MCB, LED IND. Lights, Incoming & Outgoing power Terminals complete and other allied acessories complete in all respects
Porviding and laying suitable size 6 mm sq. copper 3 core cable conforming to BIS 7098 (part-I) 1988 of latest with upto date ammendments sieman/ closter /ICC make from starter to motor of HPSEB to MCB and From MCB to BUS bar switch and starter and motor of appropriate size including all other electrical equpment/ accessories such as thimble , flexible pipe solder, nuts and bolsts, cable glands, etc laid in pipes of trenches under floor . The Type size and make will be subject to approval of HPSEB authories.
Supply of Kirloskar/leader make Cast iron double flanged reflux valve PN-1.6 sluice valve of 80 milimetre dia confirming to BIS-780-1984 (to be provided on rising main side) capable of with standing nominal seat test pressure of 21 kg/cm². in all leads and lifts and to the entire satisfaction of Engineer-In-Charge.
Welding,lowering and fixing of GI pipe 80 mm dia ( M ) P.E. with M.S.flanges submerssible cut type complete in all respect as per satisfaction of Engineer-in-charge.
Providing and fixing double loop earthing and G.I. plate 600mmx600mmx3mm thick electrodecomplete with material such as thimbles, nuts and bolts, charcoal and common salt, 25mmx6mmG.I. strips & G.I. wire as per IS: 3043-1987 with up to date amendments for motors and otherelectrical equipments and digging of pits etc. complete in all respect.
Errection of all items appearing at sr. No. 1 to 4 including cost of tee, taper, and any other fitting with flanges required as per site condition and as per direction of Engineer in charge.
Laying , jointing and testing in trenches galvanised mild steel pipe (to be levelled to grade of pipes ) flanged pipes with 5% flanged joints with circumfrential butt welded joints and remaining 95% with butt welding including cost of bends complete conforming to IS : 1239 -1990 (Part-I) with latest up to date ammendments of grade and wall thickness as specified below, suitable to with standing hydroulic test pressure in random length 4 mtr to 6 mtr with plain ends and joined with MS flanges conforming to IS:6392-1971 (latest up to date amendments ) and welding of flanges with pipes as per IS 816-1967 including required Nos. and size of M.S. nut and bolts as per IS : 1369-197 and compressed asbestos fiber jointing gaskets sheet not less than 3mm thick as per IS :2712-1965. The welding of flanges to be done on both faces in two layers to make the joints leak proof and to be entire satifications of the Engineer-in-charge. The laying of pipes should be conformed to IS :-5822-1994 and as per CPHEEO mannual and will include all conditions such as welding cutting and jointing including flushing, cleaning and hydraulic testing complete in all respect (earth work in trenches, to be measured and paid seprately )
80 mm dia (M) PE
GALAXY ASSOCIATE (BID ID -559613)
AMIT CHOUDHARY (BID ID -559648)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .