Repairs to Staff Qtrs. at Valsad, Dist: Valsad (Repairs to Drainage Line Balcony Shed and Miscellaneous work)

Name of work :-

Repairs to Staff Qtrs. at Valsad, Dist: Valsad (Repairs to Drainage Line, Balcony Shed and Miscellaneous work)

Bill of Quantities

(A) Percentage Rate Tender (Up to INR 50 Cr. )

Memorandum showing items of work to be carried out

Ite Quantity Unit Estimated Total Amount

Ite Quantity Unit Estimated Total Amount

No. Item of work In figure estimated

Rs. Ps. quantities

1 Dismentaling tiled of stone floors laid in mortar including stacking of 22 Sqm 48.21

serviceable materilas and disposal of unserviceable materials with all lead

2 Dismantling santtary fittings like wash basin . W.C. pan Indian and 7.00 No 405.65

European type, flushing tank etc. including stacking the materials with all

3 Dismentling doors, windows, ventilators etc. (wood or steel) shutters 28.00 nos 187.71

including chowkhats architraves, holdfasts and other attachment etc.

complete and stacking them within all lead and lift.(i) Not exceeding

4 Providing and laying white glazed tiles 6mm thick in flooring treads of 36.45 Sqm 917.25

steps and landing laid on a bed of 12mm thick cement mortar 1:3 (1-

cement : 3-coarse sand ) finishing with flush pointing in white cement.

5 Providing & Fixing Wooden Flush Door of 36 mm door thickness and door 56.80 Sqm 6049.90

frame of 50 X 80 mm teakwood, door made of 28 mm thick BWP wooden

flush panel with 4.0 thick vineer laminated with teakwood lipping patti on

edges with melamine polishing, S. S. Door Hinges, S. S. Decorative Door

Handle, etc. complete with necessary fixtures and fasteners as per detail

drawing and as directed and approved by the Engineer in Charge.

6 Providing and fixing wsh down water closet (European type, W.C. Pan) 4.00 Each 1854.84

with integral P or S trap including jointing the trap with soil pipe in

Cement Mortar 1:1 (1-Cement : 1-fine sand) (Seal and cover to be

measured and paid for separately)(A) vitreous China Pattern :(i) in white

colour Providing and fixing G.I. inlet connection for flush pipe with W.C.

Pan Providing and fixing plastic seat and cover for wash down water

closer with C.P. brass hinges and rubber buffers. (B) Black plastic seal and

cover. Providing and fixing brass screw down stop tap.(A) 15mm dia.

7 Providing and fixing washbasin with single hole for pillar tap with C.I. or 4.00 No 2738.07

M.S. brackets painted white including sutting holes and making good the

same but excluding fittings.(A) Vitreous China:(ii) Flat Back washbasin

mm x v 400mm size. (i) In white colour.

Providing and fixing C.P. brass waste for washbasin or sink. (A) 32mmdia.

Providing and fixing C.P. brass towel rail comlete with C.P. brass brackets

fixed to wooden plugs with C.P. brass scews.(B) 600mm x 20mm size.

Providing and fixing pillar tap, capstan head, screw down high pressure

with screws, shanks and back nuts. (ii) 20mm dia.

Providing and fixing brass screw down stop tap.(A) 15mm dia.

Waste Pipe for Wash basin C.P. 32 mm dia

8 Providing and fixing cast iron (Spun) Nahni trap of the following nominal 4.00 No 606.08

diameter of self cleaning design with C.I. screaed down or higned grating

including cost of cutting and making good the walls and floor 100mm

inlet and 50mm outlet.(C) 100mm dia.

9 P & F Jet spray approved quality including fixtures etc complete. 3.00 No 1464.50

10 P & F cold and hot water mixer cock of approved quality including fixtures 3.00 No 6363.00

etc complete with warrenty.

11 Providing and fixing C.P. brass shower rose with 15mm or 20mm inlet.(A) 3.00 No 282.16

12 Providing and fixing Gun metal check or non-return fullway wheel 3.00 No 420.63

valve.(C) 25mm dia.

13 Providing and fixing screw down bib taps of following size.(A) Brass screw 4.00 No 214.81

down bib tap polished bright. (ii) 20mm dia.

14 Providing and fixing 600mm x 450mm bevelled edge mirrror of superior 4.00 No 833.73

glass mounted on 6mm thick A.C. sheet or plywood sheet and fixing to

wooden pluge with C.P. brass screws and washers.

15 Providing and fixing concealed center point to wall ceiling & floor CPVC 90.00 Rmt 249.72

(SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for

potable water of following dia. nominal bore tube fittings and clamps

including making good the wall, ceiling and floor etc. complete. [C]

16 Providing and fixing concealed center point to wall ceiling & floor CPVC 80.00 Rmt 205.00

(SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for

potable water of following dia. nominal bore tube fittings and clamps

including making good the wall, ceiling and floor etc. complete. [B]

17 Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working 70.00 Rmt 336.24

pressure poluthene pipes of the following outside Dia. Low densidy,

complete with special falnge compression type fittings, wall clipsetc.

including making good the wall ceiling and floor.(G)110 mm

18 Constructing brick masonary for underground C.I Inspection chamber and 14.00 No 3660.76

bends with bricks having crushing stregth no less than 35 kg/cm2 in c:m

:5 C.I. cover with frame (light duty) 445 mm x 610 mm internal

dimensions total weight of cover with frame to be not less than 38 kg

(wt. or cover 23 kg. and wt of frame 15 kg) R.C.C.top slab with 1:2:4 mix

(1 Cement :2 coarese sand : 4 grade stone aggregate 20 mm size)

foundation concrete 1:5:10 inside plaster 15 mm thick with cement

mortar 1:3 finished smooth with a floating conat of neat cement on walls

and bed concerete etc. complete.

(ii) Inside dimension 500 mm x 700 mm and 450 mm deep for pipe line

with one or two inlets.

19 Providing & fixing wooden Side Storege unit (Indipendent or wall 7.00 Sqm 15136.87

mounted) of nececcery size with using Top, Side, Self 19mm thick

plywood ISI Mark fixing with adhesive and nails with 6mm thick plywood

ISI Mark as per properly fixed with 1mm thick laminated sheets all

exposed wood to be finished with melamine polishingwork & colouework

etc complete or as directed.

20 Constructing Sandwitch Platform of polished Granite at top and 25 mm 4.44 Sqm 7514.40

thick kota stone slab using cement mortar 1:3 for sandwich and fitting at

bottom & edges with waterproof rigid adhesives including making

necessary grooves in walls with vertical kotastone 30 mm x 2 no

sandwich thick every 60 cm center to center with all labour material of

approved quality incl. full moulded round front edge fixed in wall for

partition and jointed with grey cement slurry including rubbing and

polishing etc complete including providing block board laminated

drawers including providing and fixing stainless steel storage baskets etc.

21 Supplying & fixing kitchen sink glassy Asis - 304 grade 1 mm thick over all 2.00 Nos 8686.00

size 610 z 460 mm & bowl size 560 x 410 x 200 mm

22 Providing laying and jointing in true line and level 25mm dia. U.P.V.C. 40.00 Nos 91.84

Pipe ( SCH- 40) for cold water including fittings make PRINCE / SUPREME

/ ASTRAL / FINOLEX or equivalent as approved by Engineer In Charge.

Pipe shall be fixed on the wall with the help of clamp at every two metre

C/C or shall be concelled as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same with adhesive

solvent, including cost of all materials.

23 Providing, laying and jointing in true line and level 160 diametre U.P.V.C 59.00 Rmt 831.22

(Type B) conforming to IS 13592-1992 with one end plain and other end

socketed with rubber ring, & fittings conforming to ISI 14735-1999 of

approved make for drainage system pipe line, pipe shall be jointed with

each other with rubber lubricant, pipe shall be fixed on wall using of PVC

clamp of the size 160 mm diametre x 210 mm length x 196 mm heigh at

every 2000 mm center to center or shall be concealed in walls as directed

including necessary fittings such as bends, shoes etc. including testing of

pipes and joints and jointed with adhesive solvent cement including cost

of all materials.

24 Providing laying and jointing in true line and level 50mm dia. U.P.V.C. 108.00 Rmt 195.67

Pipe ( SCH- 40) for cold water including fittings as approved by Engineer

In Charge. Pipe shall be fixed on the wall with the help of clamp at every

two metre C/C or shall be concelled as directed including necessary

fittings etc. including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

25 Steel work, welded in built up sections framed work including cutting, 2649.00 Kg 67.67

hoisting, fixing in position and applying a priming coat of read lead paint

& two coat of enamel or oil paint. (A) In beams and joists, channels angles

Tees, flats, with connecting plates or angle cleats as in main and cross

beams. Hip and jack rafters, purlins conneted to common rafters and the

26 Providing and fixing of Ridge flashing for roof panel shall be made out of 88.30 Sqm 858.67

0.5 mm thick pre coated GI sheet . The Precoated sheet shall be of

minimum 240 mpa steel grade confirming to IS 14246:1995 and shall

have zinc coating of minimum 120 gsm as per IS:277:1992 , 5-7 microns

epoxy primer on both side of the sheet and polyester top coat 15-18

micron. The PPGI Sheet shall have plastic protective guard film of

minimum 25 microns to avoid scratches during transportation. The ridge

shall be fixed to the steel members by pop rivet or self drilling/self

stitching fastners @ maximum 450 mm c/c along length of

27 Providng and fixing 6mm lexan polycarbonate sheet fixed with Hilti screw 88.30 Sqm 1441.90

and rubber silicon sealer and alluminium strip of size 50 X 3 mm etc

complete as directed by Engineer incharge.

28 Providing and fixing pre-cast Rubber Dye inter locking concrete block 590.00 Sqm 686.90

60mm thick with grade of concrete M300 pnumatic compressed/Vibrated

mechanically and as per approved design confieming to IS 15658:

including 35 mm Sand layer for levelling and filling the joint with sand in

proper line and level as per guidelines of IRC : SP 63-2018 etc complete.

embers by pop rivet or self drilling/self stitching fastners @ maximum

450 mm c/c along length of

Rupees Fifteen Lakh Fifty Nine Thousand Five Hudred Twenty Two and Seventy Paisa Only.

I/We am /are willing to carry out the work at…………% above/below percent (should be written in figures and words) at the

estimated rates mentioned above amount of my/your tender works out as under.

*Estimated Amount *Estimated Amount

put to Tender Rs. 1559522.70 put to Tender Rs.

Deduction …………….. % below………………… Add ………… % above Rs. …………….

1 The Contractor shall be exhibit board as per government circular No.BDG/3277/1657 N dated 26/01/1997 S (M.GUJ) with

detailed specification and details of work and amount Involved at site without any payment as directed by Engineer-In-

2 All work shall be carried out as per public work department hand book and other specifications of Division or as directed.

3 All columns in the Schedule should be filled in ink & the total of the entries in the last column should be struck by Contractor

under his sign.

4 Rates quoted include clearance of site (Prior commencement of work and its close) in all respects and hold good for work

under all condition, site, moisture/ weather etc.

5 The Boards stating the detailed specification & detailes of Work shal be provided by the contractor as per Government

Resolution T.No.1890-240- Dtd.18/11/1990 and directed by contractor at his own cost immediately on recommanding the

6 Testing of Material Shall be done as per the statement attached with specification,The material IS Tested in GERI by

Executive Engineer Surat and Bill for the testing charges shall be paid by Executive Engineer,1% of the Amount put to

7 1% of the Construction Cost Shall be deducted from the bill Amount of the contract as per the Buildig and other

Construction works walfare cess at 1996(Labour and Employment Department Letter No CWA-2004-1831-M(3)Dated

9/12/2005 notification Of Labour & Employment department dt.03/01/2005 & Labou & Employment Department Letter no

8 In Case of RCC items Where there is a change in Grade of Mix or Change as per Actual Mix design the cost of difference of

Cement Difference shall be deducted from the rate of original item at the rate of star rate mentioned in the tender.

9 Contractor are advised to visit site before loading tender rate.

10 Necessary wiring point and drainage point are installed at Site however any modification in electrical installation and

drainage & water supply connection and minor correction to perform experienced in Lab shall be done by contractor at his

11 The Rates are inclusive of all the taxes (Excluding GST),Transport Charges,Octroi duty and storage Charges up to date.

12 The materials Covered for wiring should be got approved from the Engineer Incharge of the work.

13 GST and Income tax TDS will be deducted at a source while making payments of bills.

14 GST will be paid extra as per Govt. amendment.

15 The Materials on the work shall have to be used and carried out as specified in technical note.

I/We hereby Declare that I/we have Visited the site and fully Exquisite myself/ourselves with the local situation regarding

(A) materials,Labour and other factors pertaininfg to work before submitting tender.

I/We hereby Declare that I/we have carefully Studied the condition of Contracts,Detailed Specification and other tender

Document of this work and agree to execute the same accordingly.

Deputy Executive Engineer

Valsad (R&B) Sub-Division

Signature of Bidder

Executive Engineer

Valsad (R&B) Division