GENERAL-MLA-ADF 2024-25-Construction of new drain from Subash Nagar to NH at Perunthani ward in Thiruvananthapuram Corporation Thiruvananthapuram LAC - General Civil Work

Amount

Construction of new Drain

15.7.1:Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In mud mortar

6.1.1:Brick work with common burnt clay F.P.S (non modular) bricks of class designation 7.5 in foundation and plinth in:Cement mortar 1:4 (1 cement : 4 coarse sand)

15.2.1:Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in-Charge.Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

OD39365/2024-2025:Excavation for removal of accumulated or deposited silt ,clay,mud etc in or under water from the thodu by mechanical means or manual means with all lead and lift including disposal of the removed earth,silt,clay,mud etc to places as directed by the Engineer in charge, complete as per the directions of the Engineer in charge for fulfilling the final objective of removing all obstructions and to ensure free flow of water in the thodu.

OD26070/2025-2026:conveyance /carriage charges for rubbish/silt collected from the site to the dumping / auction area within 5 km as directed by the Engineer in charge for the purpose of auction without causing damages to environment or society after cost arrival as per the soil test results conducted.

15.40.1:Dismantling precast concrete or stone slabs in walls, partition walls etc. including stacking within 50 metres lead:Thickness upto 40 mm

60.7.3:DISMANTLING DR - Dismanling , clearing away and carefully stacking materials useful for reuse for any thickness of walls in DR masonry including disposal of debris within a distance of 150m.

OD16120/2024-2025:Putting up ring bund and bailing out water during the course of construction by engaging man coolies and removing the bund after the completion of the work as directed by the departmental officers at site.

60.7.8:DR with Departmental. Stone - DRY RUBBLE MASONRY _ Dry rubble without concrete levelling course using departmental rubble including packing to compactness to lines and levels, labour charges etc. complete as per direction of Departmental officers at site

2.6.1:Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.All kinds of soil

60.7.2:DR PACKING Under foundation - Dry stone packing under foundation with good quality blasted rubble including conveyance of material and labour charges etc. complete as per direction of departmental officers at site.

60.7.1:DRY RUBBLE MASONRY _ Dry rubble without concrete levelling course masonry with good quality blasted rubble including packing to compactness to lines and levels cost and conveyance of all materials labour charges etc. complete as per direction of Departmental officers at site

4.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)

4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

4.1.5:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources)

5.1.3:Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

5.1.2:Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size derived from natural sources)

5.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more

4.3.1:Centering and shuttering including strutting, propping etc. and removal of form work for:Foundations, footings, bases for columns

4.3.2:Centering and shuttering including strutting, propping etc. and removal of form work for:Retaining walls, return walls, (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc.

OD32424/2025-2026:Supplying Flats up to 10 mm in thickness for fencing work of required size and drilling holes wherever required to avail additional strength between steel structures including cost of fixing and welding charges etc. Strengthening steel structure with bolt, nuts and L Clamp to near by structure wherever required as per the direction of engineering in charges.

OD32425/2025-2026:Supplying at site Angle iron post & Flat for fencing work of required size and drilling holes wherever required to avail additional strength between steel structures including cost of fixing and welding charges etc. Strengthening steel structure with bolt, nuts and L Clamp to near by structure wherever required as per the direction of engineering in charges.

13.50.1:Applying priming coat:With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood)

13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work

60.6:PVC WEEP HOLES- Providing weep holes using 75mm dia. PVC pipes working pressure 4kg /sq.cm including cost of materials, conveyance, labour charges etc. complete.

OD34076/2025-2026:Name board of size 1.0*0.75 cm installed in the appropriate place visible to the public made of brickwall with granite plaque should be inserted and engraving letters etc ,complete as per the departmental officers at site

Prebin S.V (BID ID -2441395)

Bidder Name

Prebin S.V

JUSTIN JOSE