Repair and painting work of the office of Commissioner Azamgarh Division, Azamgarh

Scraping old white or colour wash including disposal of refuse as directed by the Engineer-in-charge with a distance of 60 metres(200feet). DSR No. 13.88 (Excluding cost of GST)

12mm. Thick plaster with cement mortar in proportion of 1:6 cement & fine sand 1.25FM. As per DSR No. 13.1.2 (Excluding cost of GST)

Finishing walls with water proofing cement paint of required shade: Old work (one or more coats @ 2.20 kg/10 sqm) complete As per DSR No. 13.109.2 (Excluding cost of GST)

Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre As per DSR No. 13.41.1 (Excluding cost of GST)

Painting or vanishing on iron on iron works in small areas or new wood with one coat of ready mixed priming paint and one coat of approved superior ready mixed paint of clear syuthetic varnish including supply of all materials, labour and T&P etc. required for proper completion of the work.Paint to used should confirm to the As per pwd DSR No. 13.99 (Excluding cost of GST)

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete As per DSR No. 13.80 (Excluding cost of GST)

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles above 25 mm and up to 40 mm As per DSR No. 15.23.2 (Excluding cost of GST)

Providing & Laying vitrified Floor tiles including stacking materials as per DSR No.-11.49.4) (Excluding cost of GST)

Providing & Fixing First quality ceramic glazed walls tiles confirming to IS: 15622 (thickness to be specified by the manufactureres), of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-In-Charge in skirting, risers of staeps and dados, over 12mm. thick bed of cement mortar 1:3 (1 Cement : 3 Coarse Sand) and jointing with gray cement slury @ 3.3kg/sqm., including pointing in white cement mixed with pigment of matching shade complete. as per DSR No.-11.36) Page-186 (Excluding cost of GST)

Cement Concrete Pavement Construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slabs for 14-days, using curing compound (where specified) and water finishing to lines and grade as per drawing and Technical Specification Clause 1501 (Excluding cost of GST)