Kerala

Active

Works

Civil Works - Buildings

GENERAL-Providing shelf for Assistant Public Prosecutor Office JFCM Court No-1 Thrissur Ayyanthole-ADR complex-General Civil Work

Public Works Department

Ayyanthole | Thrissur, Kerala

Amount: ₹2.7 LCloses: 5 Oct 20263d left

Timeline

Published28 Sept 2026
Closes5 Oct 2026
Bid Opening7 Oct 2026

Tender Value

₹2.7 L

EMD Value

₹6,672

Closing Date

5 Oct 2026, 1:00 pm3d left

Tender Inviting Organisation

Name

ASSISTANT EXECUTIVE ENGINEER

Address

ASSISTANT EXECUTIVE ENGINEER PWD BUILDINGS SUBDIVISION THRISSUR

Work Description

Providing shelf for Assistant Public Prosecutor Office JFCM

Tender Information

Tender ID

2026_PWD_874187_1

Reference Number

PWD/BLDG/TR/18525/2025

Tender Type

Open Tender

Product Category

Civil Works - Buildings

Form of Contract

Percentage

Period of Work

60 days

Location

Ayyanthole

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

10 documents required · 10 mandatory

Fee/PreQual/Technical/Finance

RequiredBid security remittance of Tender fee, EMD and confirmation of bid submission in e-portal (.pdf)

RequiredBid submission letter as per item no 1 Part VI filled and signed by the bidder (.pdf)

RequiredIntegrity pact certificate as per item no 3 Part VI filled and signed by the bidder (.pdf)

RequiredPreliminary agreement as per item no 2 Part VI filled and signed by the bidder (.pdf)

RequiredRequisition for e payment as per item no 6 Part VI filled and signed by the bidder (.pdf)

RequiredAffidavit as per item no 4 Part VI filled and signed by the bidder (.pdf)

RequiredBidder valid registration certificate (.pdf)

RequiredBid documents with NIT (.pdf)

RequiredGST document (.pdf)

RequiredBOQ (.xls)

Fee & Financial Details

Tender Fee Amount

₹590

Tender Fee Exemption Allowed

Yes

EMD Fee Amount

₹6,672

EMD Fee Exemption Allowed

Yes

Important Dates

Last Activity

28 Sept 2026

Published

28 Sept 2026

Bid Opening

7 Oct 2026

Download Starts

28 Sept 2026

Download Ends

5 Oct 2026

Submission Starts

28 Sept 2026

Bill of Quantities

PercentageBoQ_Ver3.0INR

This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.

BoQ1 (11 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Civil work
1.001	50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete	207.67	kg	230.93	₹47,957
1.002	10.1:Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.	15.7	kilogram	116.69	₹1,832.03
1.003	OD127292/2026-2027:Supplying and fixing 2 mm thick M S sheet over M.S. frame work, cut to required size and shape, including straight cutting, drilling, fixing with approved self-tapping screws/bolts and nuts at suitable spacing, with necessary MS washers, laps and joints where required, making the surface true and even, complete as per approved drawing and direction of Engineer-in-Charge	11.3	sqm	5,765.04	₹65,116.13
1.004	21.1.1.2:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately): For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron)	18.06	kg	584.72	₹10,560.04
1.005	21.1.2.2:For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron)	94.28	kg	708.24	₹66,772.87
1.006	21.3.2:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5.50 mm thickness (weight not less than 12.50 kg/sqm)	19.27	sqm	1,662.26	₹32,035.07
1.007	OD172025/2025-2026:proving and fixing hylam sheet in aluminium doors , windows , ventilators shutter and partitions etc .with EPDM rubber /neoprene gasket etc .complete as per the architectural drawing and the direction of engineer -in- charge ( cost of aluminium snap beading shall be paid in basic item )	15.23	sqm	1,314.26	₹20,010.92
1.008	13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work	36.97	sqm	164.86	₹6,095.53
1.009	13.60.1:Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work	8.08	sqm	172.88	₹1,396.01

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 0.05 MB

Tendernotice_2.pdf

PDF • 1.65 MB

Work Item Documents

BOQ_1483331.xls

BOQ • 0.32 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Civil work
1.001	50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete	207.67	kg	230.93	₹47,957
1.002	10.1:Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.	15.7	kilogram	116.69	₹1,832.03
1.003	OD127292/2026-2027:Supplying and fixing 2 mm thick M S sheet over M.S. frame work, cut to required size and shape, including straight cutting, drilling, fixing with approved self-tapping screws/bolts and nuts at suitable spacing, with necessary MS washers, laps and joints where required, making the surface true and even, complete as per approved drawing and direction of Engineer-in-Charge	11.3	sqm	5,765.04	₹65,116.13
1.004	21.1.1.2:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately): For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron)	18.06	kg	584.72	₹10,560.04
1.005	21.1.2.2:For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron)	94.28	kg	708.24	₹66,772.87
1.006	21.3.2:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5.50 mm thickness (weight not less than 12.50 kg/sqm)	19.27	sqm	1,662.26	₹32,035.07
1.007	OD172025/2025-2026:proving and fixing hylam sheet in aluminium doors , windows , ventilators shutter and partitions etc .with EPDM rubber /neoprene gasket etc .complete as per the architectural drawing and the direction of engineer -in- charge ( cost of aluminium snap beading shall be paid in basic item )	15.23	sqm	1,314.26	₹20,010.92
1.008	13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work	36.97	sqm	164.86	₹6,095.53
1.009	13.60.1:Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work	8.08	sqm	172.88	₹1,396.01

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

1Civil work

1.001

50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

207.67

230.93

₹47,957

1.002

10.1:Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

15.7

kilogram

116.69

₹1,832.03

1.003

OD127292/2026-2027:Supplying and fixing 2 mm thick M S sheet over M.S. frame work, cut to required size and shape, including straight cutting, drilling, fixing with approved self-tapping screws/bolts and nuts at suitable spacing, with necessary MS washers, laps and joints where required, making the surface true and even, complete as per approved drawing and direction of Engineer-in-Charge

11.3

sqm

5,765.04

₹65,116.13

1.004

21.1.1.2:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately): For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron)

18.06

584.72

₹10,560.04

1.005

21.1.2.2:For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron)

94.28

708.24

₹66,772.87

1.006

21.3.2:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5.50 mm thickness (weight not less than 12.50 kg/sqm)

19.27

sqm

1,662.26

₹32,035.07

1.007

OD172025/2025-2026:proving and fixing hylam sheet in aluminium doors , windows , ventilators shutter and partitions etc .with EPDM rubber /neoprene gasket etc .complete as per the architectural drawing and the direction of engineer -in- charge ( cost of aluminium snap beading shall be paid in basic item )

15.23

sqm

1,314.26

₹20,010.92

1.008

13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work

36.97

sqm

164.86

₹6,095.53

1.009

13.60.1:Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work

8.08

sqm

172.88

₹1,396.01