WBPWD/EE/PRLDN/NIET_59/25-26

Stripping off worn out plaster and raking outjoints of walls, celings etc. upto any height and in any floor including removing rubbish within a lead of 75m as directed.

Dismantling R.C. floor, roof, beams etc. including cutting rods and removing rubbish as directed within a lead of 75 m. including stacking of steel bars. Ground floor

First Floor

second Floor

third Floor

Applying epoxy based reactive joining agent for joining the old concrete with fresh concrete to be applied within manufacturer's specified time as per manufacturers specification. (0.4 Kg / m² of concrete surface).

Supplying and application of chemicalfor rebar anchoring by using ETA approved for seismic criteria in rebar connection, including drilling hole to the required depth by rotary6 hammer drill,cleaning with brush & jet of clean air,filling resin and hardener using serrated nozzle to elliminate mixingerror and ina voldless manner including charges....................etc. iii)Cost of rebar with rebar chemicalfor 12mm dia per cm of depth

(a) (b) Applying 2 coats of Non-Toxic Acrylic Polymer modified Paint having adhesive & waterproofing properties by mixing in proportion (1 liquid: 4 cementitious material) or as per manufacturer's specification for water proofing layer in water tank etc. (No Departmental Cement is required)

Cement concrete (1:1.5:3) with graded stone chips 5.6 mm size withhexagonal square mesh wire netting, I.R.C. fabric mesh or X.P. M. fitted and fixed after tying the existing reinforcement on concrete .......etc. b) 25 mm thick

Sealing of crack / porous concrete with Epoxy Grout by injection through nipples complete as per clause 2803.1.

Ordinary Cement concrete (mix 1:1.5 :3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if etc. Ground floor

First Floor

second Floor

third Floor

Hire and labour charges for shuttering with centering and necessary stagingupto 4 m using approved stout props and thick hard wood planks ------etc (c) Steel shuttering or 9 to 12 mm thick approved quality ply board shuttering in any concrete work Ground floor

Ist floor

2nd floor

3rd floor

Labour for propping up overhead members as aprecautionary measure against falling as directed with necessary planks, Eucalyptus props.............etc.

Reinforcement for reinforced concrete work in all sorts of structuresincluding distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending ................etc. (a) For works in foundation and upto roof of ground floor/upto 4m (i) Tor steel/Mild Steel Ground Floor

Ist floor

Second Floor

third Floor

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, (i) With 1:6 cement mortar. (b) 20 mm thick plaster Ground floor

Ist floor

2nd floor

3rd floor

(ii) With 1:4 cement mortar (c) 10 mm thick plaster Ground floor

Ist floor

2nd floor

3rd floor

(i) With 1:6 cement mortar (c) 15 mm thick plaster Ist floor

2nd floor

3rd floor

Wood work in door and window frame fitted and fixed in position completeincluding a protective coat.....etc. (d) Sal : Local.

Supplying solid flush type doors of deluxe decorative (both side) quality,conforming to I:S 2202 timber frame consisting of top and bottom rail and side styles of well seasoned timber 65mm wide each and the entire frame fitted with 27.5mm wide............etc. In ground floor (a) 35mm thick shutters (single leaf)

Supplying, fitting and fixing fibre reinforced polymer (FRP) Composite doorframe as per approved section with glass fibre reinforced plastic moulded skins and a special sandwich.............etc. (i) 66mm x 90mm

Supplying, fitting & fixing fibre reinforced polymer (FRP) Composite door shutters as per approved design with glass fibre reinforced plastic moulded skins and a special sandwich core,.........etc In ground floor. (i) 32 mm thick

Supplying & laying 3mm thick pre-fabricated plastomeric water proofing membrane conforming to EN 12311-1 & ASTMD 5147, manufactured with atactic poly propylene (APP)

Supplying profiles of required section made of Aluminium Alloy Extrusions conforming to IS: 732-1983 and IS: 1285- 1975; Annodized (with required film thickness and specified5;........etc. (A) In 10-12 Micron thickness Annodizing film Ground floor a) 2- track sliding window i) Bottom frame

ii) Top and side frame. d) Shutter for all track sliding window. i) Bottom & Top member.

d) Shutter for all track sliding window. i) Bottom & Top member.

ii) Style side member.

i) Top, bottom and side member top & bottom member side member

ii) Louvered Section

iii) Cleat angle ( Non-annodized)

Labour charge for fabrication and installation of composite door, window, partitions made from annodized extruded alloy aluminium sections for the following units:- (A) Glazed aluminium sliding windows made of extruded and annodized alloy aluminium............etc.

Supplying EPDM gusket of approved make and brand as per direction of Engineer in charge. i) For sliding windows b) 'U' shaped EPDM gasket for frames

Supplying bubble free float glass of approved make and brand conforming to IS: 2835-1987. iv) 5mm thick coloured / tinted / smoke glass

Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured ......ETC In Ground Floor:(b) Two Coats Ground floor

Ist floor

2nd floor

3rd floor

b) Priming one coat on timber or plastered surface with synthetic oilbound primer of approved quality including smoothening surfaces by sand papering etc.

a) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sandpapering etc.

Applying Acrylic Emulsion Paint of approved make and brand on walls and ceiling including sand papering in intermediate coats including putty (to be done under specific instruction of Superintending Engineer) : (Two coats) ii) Luxury Quality

Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. (In Ground Floor) (b) Two Coats.i) Water based interior grade Acrylic Primer

Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of Engineer-in-Charge......ETC In Ground floor (Two Coat) b) Premium 100% Acrylic Emulsion Ground floor

Ist floor

2nd floor

3rd floor

(A) Painting with best quality synthetic enamel paint of approved makeand brand including smoothening surface by sand papering etc. including using of approved putty etc.. ETC. (a) On timber or plastered surface With super gloss (hi-gloss) - (iv) Two coats (with any shade except white) Ground floor Timber surface

(b) On steel or other metal surface : With super gloss (hi-gloss) - (iv) Two coats (with any shade except white)

Construction of circular soak well 2.5 metre deep in all types of sandy soils with drybrick work upto 1.6 metre from the bottom having 150 mm intermediate cement brick work (1:4) band all round and cement brick work (1:4) upto 0.90 metre from top with 20mm thick cement plastering (1:4)...........ETC SAIL/TATA/RINL)

Construction of septic tank of different capacities as per approved drawing with 1st class .......etc. (ii) For 20 users A) With Pakur variety. (Other than SAIL/TATA/RINL)

Constructing Inspection pit of inside measurement 600mm X 600mm X upto 600mm(depth) with 250 mm thick 1st. class brick work in cement mortar (1:4) on all sides, bottom of the pit consisting of 100 mm thick cement concrete (1:3:6) with stone chips over a layer of jhama brick flat soling, 15 mm thick...ETC i) With Bazree (N.B Variety) (Other than SAIL/TATA/RINL)

Supplying, fitting and fixing E.W.C. in white glazed vitreous chinaware of approved make complete in position with necessary bolts, nuts etc. (b) With 'S' trap

supplying, fitting and fixing 10 litre porcelain low-down cistern of approved make with either side or bottom inlet, side overflow, brackets complete with all internnal PVC fittings White

supplying, fitting and fixing white vitreous china best quality approvedmake wash basin with C.I. brackets on 75 mm X 75 mm wooden blocks, C.P. waste fittings .........ETC.ii) 550 mm X 400 mm size

Supplying, fitting and fixing best quality Indian make mirror 5.5 mm thickwith silvering as per I.S.I. specifications supported on fibre glass frame ofany colour, frame size 550 mm X 400 mm .........ETC

Supplying, fitting and fixing towel rail with two brackets.a) C.P. over brass(ii) 25 mm dia. and 600 mm long

Supplying, fitting and fixing porcelain soap tray of approved make. (i) Recessed soap tray of size 150 mm X 150 mM

Supplying, fitting and fixing porcelain toilet paper holder of approved make with wooden spindle as necessary. i) Roll type size 250 mm X 125 mm

Supplying, fitting and fixing C.I. round grating. (i) 100 mm

Supplying,fitting and fixing approved brand P.V.C. CONNECTOR whiteflexible, with both ends coupling with heavy brass C.P. nut, 15 mm dia. (v) 900 mm long

Supplying, fitting and fixing Flat back urinal (half stall urinal) in whitevitreous chinaware of approved make in position with brass screws on 75 mm X 75 mm X 75 mm wooden blocks complete. (i) 635 mm X 395 mm X 420 mm

Supplying, fitting and fixing dome shaped C.P. waste grating for urinals. (i) 32 mm

Supplying, fitting and fixing Squating plate with integral flushing in white vitreous chinaware of approved make in cement concrete (6:3:1) with jhama chips complete. (Payment of concrete will be paid seperately).(i) 450 mm X 350 mm

Supplying, fitting and fixing bib cock or stop cock. a) (i) Chromium plated Bib Cock short body (Equivalent to Code No. 511 & Model - Tropical / Sumthing Special of ESSCO or similar brand).

Supplying, fitting and fixing pillar cock of approved make. a) (i) CP Pillar Cock - 15 mm. (Equivalent to Code No. 507 & Model - Tropical / Sumthing Special of ESSCO or similar brand)

Supplying, fitting and fixing shower of approved brand and make. (f) Hand Shower(Health Faucet) with 1mtr Fexible Tube with Wall Hook(Equivalent to Code No.573 & Model -ALLIED of Jaquar or similar).

Supplying, fitting and fixing gunmetal wheel valve of approved brand and make tested to 21 kg per sq. cm. (for water lines only). (v) 40 mm dia

(vi) 32 mm dia

(viii) 20 mm dia

Soft Close seat cover of approved make with lid and C.P. hinges, rubberbuffer and brass screws suppling, fitting and fixing complete. E W C(Model Code No. B1520118 of CERA or equivalent.) White

Supplying,fitting and fixing 32 mm dia. Flush Pipe of approved make .....etc. Polythene Flush Pipe

Supplying,fitting and fixing approved brand 32 mm dia.P.V.C. waste pipe, with PVC coupling at one end fitted with necessary clamps. i) 600 mm long

Supplying P.V.C. water storage tank of approved quality with closed top with lid (Black) - Multilayer (a) 500 litre capacity Ground Floor

Labour for hoisting plastic water storage tank.(i) Upto 1500 litre capacity.(a) Upto 1st story from G.L. Ground Floor

Labour for punching hole in plastic water storage tank upto 50 mm dia.

Supplying, fitting and fixing CPVC (ChlorinatedPolyvinyl Chloride) pipes of approved make conforming to IS-15778: 2007.........etc.(b) For Concealed Work.(i) CPVC Pipes Class-1,SDR-11 15 mm dia

25 mm dia

32 mm dia

Sub Total

Please Enable Macros to View BoQ information