Special repairs to bldg Nos HT 03 and HT 04 of 785 I AD BDE Sig Coy under GE North Ambala Cantt

Amount

SCHEDULE A PART I (B/R WORKS) Demolition of cement concrete (unreinforced) of any description, in ground floor and pavings not exceeding 15 cm thickness (below or above ground level) and removal of debries to distance exc 250 mtr and n exc 500 mtr complete all as specified and as directed.

Material and labour for machine cut kota stone slab 16-18 mm thick ( size of each stone not less than 55cm x 55cm), laid in flooring, over and including cement screed bed 20mm thick in cement mortar (1:4) base over 25mm PCC 1:2:4 type B-0 using 12.5mm graded stone aggregate and jointed & pointed with grey cement slurry mixed with pigment to match shade of the slab including cutting, waste, rubbing and polishing (Granite finish) complete all as specified and directed.

Material and labour for machine cut kota stone slab 16-18 mm thick, laid in risers/ treads of steps with bull nosed edges, over and including cement rendering 10mm thick in cement mortar (1:4) base and jointed & pointed with grey cement slurry mixed with pigment to match shade of the slab including cutting, waste, rubbing and polishing (Granite finish) complete all as specified and directed.

Material and labour for grinding and polishing old kota stone flooring including filling any cracks with cement and making good complete all as specified and directed.

Material and labour for precast plain cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregates, as in lintels up to 1.5 metre span, bressumers, string courses, copings, bed plates, plinth courses, siesmic bands and the like including necessary use and waste of formwork and including weathering, slightly rounded or chamfered angles and throating, as directed and setting in cement mortar 1:4 complete all as specified and directed.

Material and labour for mild steel TMT bars, Fe- 500/550D, 10mm dia and over, as in reinforcement, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Material and labour for mild steel TMT bars, Fe-500/550D, 6 mm dia and over upto and including 8mm dia as in stirrups, spacers and binders, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Material and labour for use and waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports overhangs, etc. also splays between floors and beams, etc. in rough finished flat surfaces of concrete complete specified and directed.

Material and labour for premium quality, joint free, glazed coloured ceramic tiles of size 300 x 450 x 7mm thick on vertical surfaces of walls over and including 10mm thick rough finished plaster in cement mortar (1:4), set, jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

Material and labour for providing cement concrete 1:3:6 type C1 using 20mm graded crushed stone aggregate as in roof kerbs or mud stops, rounded or chamfered on edges, complete, all as specified and as directed.

Taking down cement or cement lime plaster, of any description, on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc, and removal of debries to distance exc 250 mtr and n exc 500 mtr complete all as specified and as directed.

Material and labour for rendering 10 mm thick on faces of brick work or concrete surfaces of ceiling in cement mortar 1:4, finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6, finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for rough cast plastering over and including 15mm thick rendering in CM 1:3 complete all as specified in Clause14.22 of MES Schedule Part-I and as directed. Note: 1. Rough cast finish shall be provided as under:- After applying under coat of CM 1:3 and while it is still in plactic state the rough cast mixture consisting of crushed stone or fine aggregate (which is generally of size between 4 to 8 mm depending on the texture required) mixed with coarse sand and cement in the ratio of 1:1:1 shall be applied and finished even. The mix of cement and sand shall be made slightly loose/wetter than normal for rendering to ensure that larger aggregates are thoroughly covered. 2. Contractor's quoted rate shall include all above provisions and no extra shall be admissible on this account.

Supply only integral water proofing compound complete all as specified and as directed.

Material and labour for preperation of newly plastered surfaces of walls, chajjas, roof projections, cornices etc. and applying two coats of oil bound distemper over 1-2mm thick wall care putty complete all as specified and as directed.

Material and labour for preparation of newly plastered wall surfaces and applying two coats of cement base paint complete all as specified and as directed.

Material and labour for preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and as directed.

Material and labour for PCC 1:3:6 type C-2 (using 40 mm graded mechanically crushed stone aggregate), 75mm thick, as in plinth protection/PCC path and paving, laid in panels of area not exceeding 1.20 sqm with 12mm wide joints filled with mastic (using bitumen and sand mixture applied hot in the ratio of 1:3 by weight) formed at the end of each panel and change in direction of plinth protection/PCC Path and paving and finishing the top surface even and smooth without using extra cement complete all as specified and as directed.

Taking down chowkats or frames with shutter, area not exceeding 1.50 Square metre (w/o taking off shutters from frames) and removing from site, including cutting holes in wall/concrete for taking out existing hold fasts and making good the disturbed portion of jambs and adjoining surfaces in CM (1:3) and finishing the surfaces to match with existing finish including removal of serviceable/unserviceable material from site complete all as specified and directed.

Taking down chowkats or frames with shutter, area exceeding 1.50 Square metre and not exceeding 4.00 Square metre (without taking off shutters from frame) and removing from site, including cutting holes in wall/concrete for taking out existing hold fasts and making good the disturbed portion of jambs and adjoining surfaces in CM (1:3) and finishing the surfaces to match with existing finish including removal of serviceable/unserviceable material from site complete all as specified and directed.

Supply and fixing of steel window box type, using ERW hollow 'P' section, factory made, comprising double frame for and including gauged and glazed skeleton shutter, 30mm thick, jointed internally with flat iron 25x3mm complete including hinges, handle, tower bolts, stops, lugs etc. all as shown on drawing No. TD-219 sheet 1/3 to 3/3 of HQ CE Chandigarh Zone as applicable complete all as specified and as directed. Note: (i) For the purpose of measurement and payment double shutter both glazed and gauzed with frame shall be considered as one unit. (ii) Unit rate quoted against this item shall also include the iron mongery and grill 10 mm square bar irrespective of whatever shown on drawings and one shop coat of zinc chromate primer . The pattern of grill shall be all as shown on drawing (iii) Glazing, wire mesh and painting shall be measured and paid for separately. (iv) The drawings may be referred from GE office or from this office during working hours.

Supply and fixing of mild steel framed work such as gratings, forged into spikes; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 including necassary cutting, drilling and welding complete all as specified and directed.

Supply and fixing of rolled mild steel in framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete conforming to Fe-290.Gde-E-165 including necassary cutting, drilling and welding complete all as specified and directed.

Supplying and fixing for factory made 35mm thick, 2nd class HW, plain framed, panelled shutters (two panel) with lock rail and panel of 9mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS:1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.

Material and labour for second class hard wood glazed and skeleton shutters, 35mm thick, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, elc.;sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats all as specified and directed.

Supply and fixing of aluminium anodised, 150mm long, barrel tower bolts of extruded section and fixed complete all as specified and as directed.

Supply and fixing of aluminium alloy, anodised, 300mm long sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast 01' extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed.

Supply and fixing of aluminium handles, 150mm, cast type, anodised complete all as specified and as directed.

Supply and fixing of second class hard wood small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessaty labours; articles not exceeding 200 cu.cm each complete all as specified and directed.

Supply and fixing of mild steel bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way traps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed.

Supply and fixing of stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

Supply and fixing of sheet glass, 3mm thick, ordinary quality and glazing with oil putty in squares not exceeding 0.5 sqm. in each pane complete all as specified and directed.

Material and labour for preparation of new steel surfaces, of any description not otherwise described, over 10 cm width or girth and applying two coats of approved colour synthetic enamel paint, over a coat of red oxide zinc chrome primer complete all as specified and as directed.

Material and labour for preparation of new steel surfaces, of any description not otherwise described, over 10 cm width or girth and applying two coats of approved colour synthetic enamel paint, complete all as specified and as directed.

Supply and fixing of mild steel, cold rolled, butt hinges, 100mm size, medium weight, ISI marked and fixed complete all as specified and as directed.

Supply and fixing of mild steel, cold rolled, butt hinges, 50mm size, medium weight, ISI marked and fixed complete all as specified and as directed.

Material and labour for preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of approved colour synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Material and labour for providing and laying 3mm thick APP(atactic polypropylene polymer) modified prefabricated, five layer, weight not less than 3.60 kg/Sqm, water proofing membrane, black finish, reinforced with non woven polyster matt, make as approved, consisting of a coat bitumious primer @ 0.40 ltr/ Sqm by the same membrane manufacturer of density 0.87 to 0.89 kg/ltr at 25' C temprature and viscosity 70-160 cps over the primer coat with overlap of 100mm at the sides and 150mm at the end, the layer membrane shall be laid using butane gas torch and sealing all joints etc after preparing the surface complete as per standard practice all as per manufacture's instuctions, over and including 50mm thick PCC 1:2:4 type B-1 using 20mm graded stone aggregates as in levelling course etc., including roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust,etc. and brushing the surface with neat cement slurry @ 3.0kg of cement per sq. metre including taking down of old brick tiles and demolition of mud phuska and removal from site complete all as specified and directed. The vital physical and chemical parameters of the membrane shall be as under :- (i) Joint strength in logitudinal and transverse direction at 23'Cat 650/450 N/5 cms (ii) Tear strength in logitudinal and transverse 150'C when tested in accordance with ASTM (d-5147) (iii) The laying of membrane shall be got down through the authorised applicator of manufactures of membrane only. Note:- The contractor will carry out ponding test after application of APP treatment before claiming payment.

Material and labour for 40mm thick brick tiles laid on 15mm thick bed in cement mortar (1:6) and jointed and pointed in cement mortar (1:3) mixed with 5% of crude oil by weight of cement on mud phuska complete all as specified and directed.

All as above Item No 40.00 but except brick tiles complete all as specified and directed.Note: Old serviceable brick tiles as obtained from serial item No 39.00 hereinbefore shall be reused after cleaning the bricks tiles. The rate quoted shall include for cleaning the bricks tiles also.

Surface dressing not exceeding15cm deep and getting out in soft/loose soil and removal of debries to distance exc 250 mtr but n exc 500 mtr complete all as specified and directed.

Material and labour for hardcore of broken stone or boulders of gauge exc 63mm but not exceeding 100 mm, deposited, spread and levelled in layers not exceeding 15cm thick, watered and rammed/rolled to a true surface complete all as specified and directed.

Material and labour for 75 mm thick PCC (1:4:8) type D2 (using 40mm graded stone aggregates), as in sub base of floors, finished rough and even to receive floor topping complete all as specified and as directed.

Material and labour for 100 mm thick PCC (1:2:4) type B-2 (using 40mm graded stone aggregates), as in floors, finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for forming construction joint 30mm deep x 10mm wide filled with sealing compound Grade 'A' complete all as specified and as directed.

SCHEDULE A PART II (E/M WORKS) Taking down carefully any type of point wiring (light, fan, socket or power) complete with fittings such as switches, ceiling roses, pendants, regulators, sockets, tube light fittings with all accessories etc., and/or drawing out from existing conduit/batten and removal of materials from site and making good the disturbed surfaces of wall, floors, ceiling etc to match with the existing surfaces with matching OBD/White wash/Distemper complete all as specified and as directed.

Material and labour for concealed point wiring using approved colour coding as per IS, with multi stranded copper conductor 1.5 sqmm (Nominal area), single core, FRLS-H, 1100 volts, ISI marked, PVC insulated and unsheathed stranded cable drawn through and including non metallic, medium grade PVC concealed conduit not less than 25.00mm to 32.00mm dia and its fittings, including cutting chasing on wall/ceiling, including all tees, bell mouth pieces and fixing accessories such as couplers, saddlers, pipe hooks etc, PVC junction boxes, ISI marked, including 1.5 sqmm single core PVC insulated and unsheathed FRLS-H cable, 1100 volt grade with multi stranded copper conductor green colour as earth continuity conductor upto common earth and connecting to common earth dolly with and including MS flush boxes of 2 to 18 modules with inner and outer cover plates, confirming to IS 5139 of 1969 and IS 14772 of 2000 for fixing modular switch sockets for one light point /fan point/bell point controlled by one one way switch complete all as specified and as directed. Notes :- (i) Switch, socket, ceiling rose, lamp holder, bell, bell push and fan regulators to be measured and paid for separately. The quoted rates are deemed to be included for providing cover plates and MS flush boxes as required at site. (ii) PVC Conduit conforming to IS 9537 part I & III. (iii) All chases will be cut by chase cutter only and surfaces shall be make good as per existing surfaces. (iv) The concealed conduits and MS boxes as fixed against new point wiring, shall be verified by Engineer-in-Charge before making good the surfaces by plastering and other finishes.

Description all as per Srl item No.48.00 here in before but for one 3 pin socket outlet point 5 Amp on same board.

Description all as per Srl item No.48.00 here in before but for one 3 pin socket outlet point 5 Amp on Independent board.

Description all as per serial item No. 48.00 above, but for one socket point, 3 pin,15 Amps,on independent board, with 4.0 Sqmm PVC, FRLS-H, unsheathed, multistranded cable, 1100 volts grade, ISI marked, including 2.5 Sq mm size, green colour, PVC insulated FRLS-H, continuous copper earth wire and connected to common earth dolly complete all as specified and as directed.

Supply and fixing of switch modular, 16 Amps, one way, one module,single pole, 230 volt, 50 Hz, AC supply complete all as specified and directed.

Supply and fixing of socket outlet modular, 2/3 pin, 6/16 amps, one way, 2 module, single pole, 230 volts complete all as specified and directed.

Supply and fixing of switch modular, 6 Amps, one way, one module, flush type, single pole, 230 volts, 50 Hz, AC supply, ISI marked complete all as specified and directed.

Supply and fixing of socket outlet modular, 2/3 pin, 6 amps, one way, 2 module, single pole, 230 volts, ISI marked complete all as specified and directed.

Supply and fixing of ceiling rose surface bakelite 65x50mm, three terminals complete all as specified and as directed.

Supply and fixing of lamp holder, PVC/Polycarbonate type, with back plate suitable for batten fittings complete all as specified and as directed.

Supply and fixing of retrofit LED lamp/Bulb of 12 watt,pin type complete all as specified and directed.

Supply and fixing of Television (TV) socket outlet modular, 2/3 pin, one way, 2 module, 5 Amps, 230 volts, ISI marked complete all as specified and as directed.

Supply and fixing of rigid non-metallic PVC conduit, 20mm dia, exclusive of boxes (junction/ terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth, tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc.for passing TV cable concealed in wall/ceiling/floor etc. complete all as specified and directed.

Taking down ceiling/wall fan or exaust fan, of any type and description after disconnecting all electric connections carefully, sealing cable end, dismantling blades and removing fan and spray painting, washing with proper washing powder solution including filling cavities with filler material and matching with existing surface level finish, spray painting with two coats of super enamelled paint of approved colour after cleaning all dust, writing MES No with black colour permanent marker etc. and hanging ceiling/wall fan and fixing exaust fan at same or other location as directed and connecting up including three core flexible cable 23/ 0.0076 size from ceiling rose to connector of fan drawn through PVC flexible conduit pipe and testing on fixing complete all as specified and as directed.

Supply and fixing of fan regulator modular, 120 watt, 2 module, 230 volts, 50 Hz AC supply, suitable for ceiling fan, any type/make/sweep complete all as specified and as directed.

Supply and fixing in replacement box type LED tube light fitting 18-20 watt, 4 ft, aluminium housing body, with and including 18-20 watt LED tube rod , with drivers, 220-240 Volt, 50 Hz connecting up with 2/3 core 1.5 sq mm flexible copper conductor cable from ceiling rose to connector block of light fitting including disconnecting and taking down existing light fitting and removal complete all as specified and directed.

Supply and fixing in replacement of recess mounted LED circular down light fitting 15-18 watt, high efficient diffuser, AC supply, 240 volts, 50 Hz, with all accessories, internally prewired and connecting with copper conductor flexible cable 3 core of size 1.00 sqmm from ceiling rose to connector of the light fitting complete all as specified and directed.

Supply and fixing of LED security light luminaire 45 watt, 230 volts, 50 Hz, made up of die cast aluminum housing with black epoxy powder coating with cover heat resistant glass, safety input voltage range 170 to 270 Volts, IP66 protection, including service brackets of GI pipe 25mm bore, light grade, of length 1.60 metre, bent to required shape, fixed with MS clamps of size 40 x 6mm flat iron strip, 150mm long and 4 Nos.8mm dia stainless steel bolts and nuts and washers and suitable reducer for connecting to GI pipe as required at site and making all required electrical connections using 3 core copper flexible cable from terminal box to ceiling rose including disconnecting and taking down of old fitting with bracket as existing complete all as specified and as directed.

Supply and fixing of over and low voltage relay, 230 volts, single phase, adjustable from 170 volts to 230 volts in one module suitable for (1Ph+N) complete all as specified and directed.

Supply, fixing, testing and commissioning in replacement of RCBO, 40 Amps, double pole, conforming to IEC-61009, 2 module, 300 mA (HI immunity) sensitivity, 230 volts, 50 Hz, with degree of protection IP-20, ISI marked complete all as specified and directed.

Supply and fixing in replacement of MCB, single pole neutral, 240 volts, 50Hz, breaking capacity 10KA, 'C' curve, 32/40 Amps, ISI marked complete all as specified and as directed.

Supply and fixing of MCB, single pole, 240 volts, 50Hz, breaking capacity 10KA, 'C' curve, 6-32 Amps, ISI marked complete all as specified and as directed.

Supply, insatallation, commissioning and testing of distibution board for MCBs, DBs, SPN, 12 way, double door, transparent acrylic double door, IP 43, as per IS 8623, 240 volts, with and including 100 Amps rated fully insulated copper bus bar, insulated neutral bar, earth bar, door earthing, reversible doors, PAN assembly for easy installation and also incoming and out going connections with suitable size of lugs/thimbles including dismantling and taking down the existing DB's of any type complete all as specified and directed. Note:- MCB shall be measured and paid separately.

Supply and fixing of sheet metal enclosures for distribution board for MCCB's, TPN, Vertical, double door, 6 ways, 415 Volts with 200 Amps rated bus bar IP-43 protection, including adjustable MCCB TPN 100 Amp breaking capacity 16kA, as incomer and MCB's as out going with suitable size of MS cabinet 2mm thick and making all type connections with suitable size of gland for incomer cable complete, concealed on the wall surface, making good the disturbed portion with adjoining surfaces to match with existing finish and taking down the existing DBs and MCBs any type complete all as specified and as directed. Note: MCBs shall be measured and paid separately. The quoted rates shall be deemed to be included for MCCB as specified.

Material and labour for sub main wiring with two single core, 6 sqmm, FRLS-H, 1100 volts grade, ISI marked, with multistranded, PVC insulated unsheathed copper conductor cable, drawn in and including rigid non metallic PVC conduit, medium grade, not less than 25 mm dia, ISI marked for housing cables, concealed in wall or ceiling including necessary cutting, chasing with machine and making good disturbed surfaces as per existing, with accessories with and including one additional 6 sqmm, PVC insulated, stranded copper conductor, FRLS-H, green colour for earth continuity conductor connected to common earth dolly including taking down old unserviceable sub main wiring of any type and making good the disturbed surface complete all as specified and as directed.Note- Three runs of cable and one run of concealed conduct shall be measured as one unit.

Supplying and fixing of 1100 volts grade, heavy duty cable, PVC insulated, aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular, 16 sq mm including taking down old unserviceable service wiring of any type description complete all as specified and directed.

Supply and laying of LT underground cable, XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cable (heavy duty), 1100 volts grade, with stranded aluminium conductor of size 3.5 core, 50 Sqmm and laying in trenches including disconnecting and taking down of old unserviceable existing cable and removal complete all as specified and as directed. Note: Excavation and earth work shall be measured and paid separately.

Excavation in trenches not exceeding 1.50 metre wide and not exceeding 1.50 metre in depth and getting out in soft/loose soil for laying of cable complete all as specified and as directed.

Returning filling in, in soil, including spreading leveling watering and well ramming in layers not exceeding 25 cm each complete all as specified and as directed.

Removing excavated spoil/materials to a distance not exceeding 50 metre and depositing where directed at level not exceeding 1.5 above the starting point complete all as specified and as directed.

Material and labour for Sand cushioning to cable with a layer of sand 8 cm deep before laying the cable and 15 cms deep after laying the cable (punned down to 18 cms depth after laying and stretching of cable ) complete all as specified and as directed.Note:- The punned thickness 18cm shall be considered for payemnt purposes.

Supply and laying un-reinforced, precast concrete cable cover, class LV type 1, Flat, with peak, size 250 mm x150 mm x40 mm complete all as specified and as directed.

Supply and fixing of light grade, GI tubing, of size 40mm dia, for cable protection and fixed with clamp to pole and wall with nuts and bolts including taking down of old pipe as existing, complete all as specified and as directed.

Disconnecting/dismantling old unserviceable earthing and material and labour for new earthing with galvanised earth plate electrode 600mm x 600mmx 6mm thick surrounded by charcoal and salt, buried directly in ground vertically in a pit of depth not less than 2.25m below ground level with top edge of the earth plate not less than 1.5m below normal ground level, connected to 4.00 mm GI wire earth lead by means of bolts, nuts, checks nut and washers made out of galvanized iron or steel, earth wire and thimbles protected by galvanized steel pipe 15mm dia (light grade) and connected to main switch or main control board all as shown in Electrical Plate No.3 of SSR Part-I & including necessary excavation and earth work in any type of strata, PCC (1:3:6) type C1 in pit, RCC cover slab 50mm thick in 1:2:4 type B-1 using 8mm dia TMT bars @10cm c/c both way with one 8mm dia bar as handle for lifting, 20mm dia GI medium grade watering pipe, funnel, wire wesh, charcoal or coke & salt in alternate layers, etc.all as indicated including testing on completion complete all as specified and directed. Note:- (i) The new earthing shall be provided adjecent to old earthing site on the locations as directed by engineer in charge.(ii) The quoted rates shall be deemed to be inclusive of GI earth wire 4mm dia of length 7.5 mtr length.

Note:- Amount of credit of Rs. 52,238.00 for retrieved materials is mentioned in Schedule of Credit Page No.15 of tender documents in pdf form which will be deducted offline while acceptance of tender.

M/s B.S.Jain

RAJESH KUMAR

V K Constructive Builders

Swami Enterprises

Ashwani Kumar

dhingra builders

M/s Mangal Construction Co.

Karishan Kumar goel

Shubham Enterprises