Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹22.9 LAccepted-AOC | L1 | Accepted-AOC LOWEST BIDDER | |
| 2 | L2₹23.5 L+₹10,140.56 (0.43%)Rejected-Finance | L2 | Rejected-Finance NOT LOWEST BIDDER | |
| 3 | L3₹24.9 L+₹1.6 L (6.79%)Rejected-Finance | L3 | Rejected-Finance NOT LOWEST BIDDER |
Tender Value
₹25 L
EMD Value
₹50,000
Closing Date
1 Jan 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer, Banar
Garrison Engineer Banar, Jodhpur-342027
COMPREHENSIVE MAINT CONTRACT FOR ATTENDING DAY TO DAY B/R AND E/M COMPLAINTS FOR OFFRS/JCO/OR MD ACCN AT NAGTALAO UNDER GE BANAR
2023_MES_631051_1
8823/66/E8
Open Tender
Civil Works
Item Rate
330 days
Banar
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
Garrison Engineer, Banar
₹50,000
Yes
31 Jan 2024
4 Dec 2023
3 Jan 2024
4 Dec 2023
1 Jan 2024
18 Dec 2023
Amount
Water Supply and Sanitary Disconnecting existing tanks cap exc 250 ltr but nexc 500 ltrs , setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required, reconnecting and re-fixing in position including cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc complete all as specified.
Disconnecting existing tanks cap exc 500 ltr but nexc 1000 ltrs , setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required, reconnecting and re-fixing in position including cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc complete all as specified.
S&F in repairs Toilet paper holder with flat recessed type stainless steel complete all as specified.
Taking down cement plaster from stone masonry walls etc & M&L for 15 mm thick rendering in CM 1:6 finished even & smooth complete all as specified.
Taking down cement plaster from RCC chajja, fascia, ceiling etc & M&L for 10 mm thick rendering in CM 1:4 finished even & smooth as in patches n. exc 3 Sqm each complete all as specified.
M&L for two coat of OBD on newly plastered/ unplastered surfaces over one coat of wall care putty on wall & including preparation complete all as specified.
M&L for preperartion of newly plastered surfaces of wall and applying three coat of white wash complete all as specified.
Preparation of new plastered/unplastered surfaces of wall & applying two coat of cement base paint complete all as specified.
Demolition of floor, hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified.
Demolition of Cement concrete in ground floors and pavings n.exc 15 cm thickness below or above ground level) complete all as specified.
M&L for 25 mm thick cement concrete type B-1 1:2:4 (using 20mm graded crushed stone aggregate) to receive floor finishes etc complete all as specified.
M&L for coloured glazed ceramic tiles 300mmx450mmx6mmthick over and including 15mm thick rendering in CM (1:6) set and jointed in neat cement slurry and pointed with colour cement to match on vertical surfaces as in dado complete all as specified.
M&L for coloured non skid ceramic tiles 400mmx400mmx6-7 mm thick in floor etc set jointed and pointed in white or coloured cement to match as in floors over and including 15mm thick screed bed in CM (1:6) complete all as specified.
M&L for 15-17 mm thick granite (of any type) machine cut in cooking plateform laid over 10mm thick screed bed in cement mortar(1:4) and joined with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including polishing complete all as specified.
S & F in repairs CP Bib cock 15mm bore complete all as specified.
M & L in repair 15 mm stop valve (concealed) cromium plated, screwed down, high pressure with crutch or butterfly handle screwed for iron pipe or for unions and fixed complete all as specified.
M & L in repair 20 mm gate valve cast copper alloy, screwed down, high pressure with crutch or butterfly handle screwed for iron pipe or for unions complete all as specified.
M & L in repair 25 mm gate valve cast copper alloy, screwed down, high pressure with crutch or butterfly handle screwed for iron pipe or for unions complete all as specified.
S &F in repairs 15mm bore stop/angle valve of copper alloy, CP with flange complete all as specified.
S &F in repairs Pillar cock chromium plated fancy type 15 mm bore complete all as specified.
S &F in repairs Central hole basin mixer (Basin Mixer) brass chromium plated fancy type 15 mm bore complete all as specified.
S &F in repairs Mixing valve (wall Mixer) 3 in 1 with flexible tube & hand shower complete chromium plated fancy type 15 mm bore complete all as specified.
S &F in repairs PVC connection 15 mm bore of length 450 mm complete all as specified.
S &F in repairs PVC connection 15 mm bore of length 600 mm complete all as specified.
S &F in repairs PVC waste pipe 32-40 mm size for Wash Hand Basin / steel sinks etc complete all as specified.
S &F in repairs PVC flushing cistern 10 Ltr Cap dual flush type complete all as specified.
S &F in repairs CP waste coupling 40 mm size with rubber gasket etc for SS sink complete all as specified.
S &F in repairs CP waste coupling 32 mm size with rubber gasket etc for WHB etc complete all as specified.
S&F in repair Fancy type Chromium plated shower roses 125mm size with arm, with or without swivel joints, 15mm bore, including fixing to steel pipe or union complete all as specified.
S &F in repairs PTMT body Ball cock /Float Valve 15/20 mm bore with epoxy coated Aluminum rod & HDPE Ball complete all as specified .
S &F in repairs PTMT body Ball cock /Float Valve 25 mm bore with epoxy coated Aluminum rod & HDPE Ball complete all as specified.
S &F in repairs HDPE flush pipe 32 mm dia of flush cistern to WC complete all as specified.
S &F in repairs GI Nipple 20 mm bore, 75mm long for tank connection complete all as specified.
S&F GI Nipple 25 mm bore, 75mm long for tank connection complete all as specified.
S &F in repairs health foucet with 1200mm long flexible mild steel tube, 15 mm dia with wall hook and complete all as specified.
S &F in repairs CP body hygeine wash Jet spray assembly incl flexible PVC pipe complete all as specified.
S &F in repairs Two way angle cock 15 mm bore CP complete all as specified.
S &F in repairs Two way Bib cock 15 mm bore CP fancy type complete all as specified.
S &F in repairs Aluminium anodised Tubular towel rail, 20mm dia, D type, 60cm long between flanges all as per sample complete all as specified.
S &F in repairs Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 300gms) complete all as specified.
S &F in repairs Sheet glass shelf assembly consisting of 6-8 mm thick sheet glass shelf 10-15cm wide with chromium plated bracket guard and railing 60cm long complete all as specified.
S &F in repairs Plastic water closet seat cover, white, closed pattern with flat bottom, and cover with mild steel chromium plated or aluminised hinging device complete all as specified.
S &F in repairs CP Grating 100 mm dia with or without hole (for waste Pipe) 100 mm dia complete all as specified.
S &F in repairs Vitreous China wash hand basin size 550x400 mm size with pedestal and a pair of brackets, waste pipe, waste coupling complete all as specified.
S &F in repairs Vitreous China wash hand basin size 550x400 mm size with a pair of brackets, waste pipe, waste coupling complete all as specified.
S &F in repairs vitreous China squatting pan, ‘Orissa’ pattern, size 580x440 mm white, with integral foot rests complete all as specified.
S &F in repairs Stainless steel sink with draining board, made out of 1.00mm thick sheet for kitchen with plug, washers waste pipe, cantilever brackets, connecting union overall size 915mmx460mm with bowl size 410mm x 330mm x 160mm complete all as specified.
S&F in repairs sinks made of stainless steel lmm thick kitchen with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or includingfixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified.
S &F in repair of 15 mm bore GI tubing medium grade including fittings as elbow., socket , nipple etc complete all as specified.
S&F in repair of 20 mm bore GI tubing medium grade including fittings as elbow., socket , nipple etc complete all as specified.
S & F in repair 25 mm bore GI tubing medium grade including fittings complete all as specified.
S &F in repairs sink cock , cromium plated 15 mm bore complete all as specified.
Attending complaints of leaking/unservicable ,low level flushing cistern, PVC or chinaware for making it fully functtionl and leak proof by repacement the defective parts such as rubber washers , PVC levers,PVC/CP knobs if required complete all as specified.
Attemding complaints of internal water supply pipes, fittings and bottles traps for removing of blockages etc of any description incl removing & cleaning of air locks etc. by pressure pump or any other means incl taking down and refixing of pipes & fitting and replacing old unservicable pipes and fitting with new ones in any dia of pipe complete all as specified. This item includes minor repair items as change of GI socket, elbow or T etc as reqd complete all as specified. Note: New GI pipes replaced if any shall be measured and paid under respective item of this schedule.
Attending complaints of leaking/unservicable and petty reapir to leaking bib taps , pillar taps, stop cock , angle valve ,wall mixture,WHB mixture, two way bib taps, etc of any description incl change of Rubber washer /Jumper sheet etc complete all as specified. Note : All items as washers , spindles , Rubber washer /Jumper sheet etc are deemed to be included in quoted rate.
S & F as in repairs Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position cap 500 ltr incl dismantling out old PVC/RCC tank complete all as specified.
All as per Ser item No 57.00, but cap 1000 ltrs.
S&F PVC tank cover for 500 liter /1000 liter water storage tank complete all as specified.
S&F in repairs vitreous china wash down water closet (Pedestal pattern EWC) one piece, coloured, floor mounted coupled closet, including connection to drain (or outgoing pipe), anti-sypohonage pipe etc, with & including WC seat cover coloured closed pattern with flat bottom and cover, vitreous china symphonic action type twin flush flushing cistern of 10 litre capacity with lid, necessary fittings complete all as specified.
S&F in repair Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete all as specified.
S&F as in repairs stainless steel plate rack of size 30"x24"x10" size as per trade pattern fabricated with 0.50mm thick stainless steel sheet suitable for stacking 15 plates with hooks /fittings complete all as specified.
S&F in repairs decorative type curtain rod stainless steel finish MS pipe 22 to 25 mm dia as per sample, superior quality complete and incl brackets and Decorative fincals (round type with mirror optic finish) trade pattern for decorative type curtain rods suitable for holding & end cover complete all as specified.
S&F as in repairs PVC moulded bath cabinet with mirror over all size 400x300 mm with shelves on the inner side & mirror on the shutter complete all as specified.
Joinery Taking down Chowkhat or frame with shutter (without taking out shutter from frame) of area not exc 1.5 sqm each complete all as specified.
Taking down Chowkhat or frame with shutter (without taking out shutter from frame) of area exc 1.5sqm but not exc. 4 Sqm each complete all as specified.
Taking down shutter of any description area exc 1 Sqm but n. exc 2 Sqm each complete all as specified.
Taking down steel windows / ventilator with frame of any description and any size complete all as specified.
S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supplying and fixing in opening as per specification and drawings complete all as specified.
S&F factory made solid panel pvc door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, as per specification & drawing complete all as specified.
M&L framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified.
S&F 2nd class hard wood plain framed paneled shutter 35mm thick with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board upto commercial veneering on both faces. The size of rail and stile as per IS-1003 (Part-I) kiln seasoned and chemically pressure treated (Factory made shutters) complete all as specified.
S&F 2nd class hard wood 35 mm thick glazed and skeleton shutters open rebated and prepared to receive glass, gauge, etc divided into squares by Rails and styles , with plain chamfered or rounded mitered and rebated size of members of shutters as specified in SSR Part-I, section 8, clause 8.24 (a) complete all as specified.
S&F of steel window with side hung shutter including box type hinges with steel handle, and steel peg stay, with or without coolar opening, complete with glazing bars, dovetailed or welded complete all as specified.
All as per Ser item No 74.00, but without glazing bars.
S&F Steel ventilator with top hung shutters with glazed bars including hinges steel peg stay etc complete all as specified.
Framed work such as grills, gratings, cooler stand etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified.
S & F galvanised MS wire cloth 0.56 mm nominal dia of wire & 1.18 mm average width of apperture fixed complete all as specified.
S&F in repairs galvanised MS wire cloth 0.56mmm nominal dia of wire and average width of aperature 1.18mm complete all as specified.
S&F of 40 mm thick Flush shutters, solid core construction, with block board core and plywood face panels,Both face is covered with decorative face veneer with lipping/frame to match complete all as specified.
M&L for PCC 1 : 3 : 6 type C1 for fixing hold fast etc for fixing of chowkhats complete all as specified.
M&L for Bands, straps, supports or stays; hold fasts; wall ties; hooks for hanging fans; similar small articles conforming to Fe -290 Gde E-165 complete all as specified.
S&F 100mm size SS butt hinges complete all as specified.
S&F 300mm long Mild steel sliding door bolt plate type stove enamelled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts,four on bolt plate and two on tapple plate and fixed complete all as specified.
S&F 200mm MS barral tower bolts stove enamelled black with bright bolt and fixed complete all as specified.
S&F in repairs 200mm MS barral tower bolts stove enamelled black with bright bolt and fixed complete all as specified.
S&F150mm MS pressed handle oval type stove enamelled black complete all as specified.
S&F in repairs, 150mm MS pressed handle oval type stove enamelled black complete all as specified.
S&F in repairs 150 mm size best quality Floor door stopper of aluminium alloy body and tongue, anodised & hard rubber shoe complete all as specified.
M&L Preparation of new wooden surface exceeding 10cm width or girth and applying two coat of synthetic enamel paint over one coat of pink primer complete all as specified.
M&L for preparation new or previously untreated surfaces of steel at any description over 10cm in width or girth and apply two coat of syntetic enamel paint complete over a coat of red oxide primer complete all as specified.
Supply and fixing in repairs Aluminium Anodised extruded section tower bolt of size 200 mm complete all as specified.
Supply and fixing in repairs Anodised aluminium extruded section door handles size 150 mm complete all as specified.
S& F in repairs MS sliding door bolts 300mm long, plate type, stove enamelled black, with bright bolt not less than 12 mm dia with and incl a mini of 6 bolts and nuts four on bolt plate and two on staple plate and fixed complete all as specified.
S & F in repairs mild steel 300mm ordinary rat tail rod pattern spring incl roller and roller plat complete all as specified.
Supply and fixing in repairs Mild Steel Butt hinges medium weight cold rolled 100mm size complete all as specified.
S&F in repairs Stainless Steel medium weight 100mm size Butt hinges complete all as specified.
S&F in repairs Mild steel body single action door spring hinge size 100 mm complete all as specified.
S&F in repair cast iron body door closer hydraulic regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified.
S & F in repairs 40mm dia cupboard knobs fixed the screw and washer of MS bright finished complete all as specified.
S & F in repairs Mild steel body peg stays 250 mm long (minimum) to steel windows & vents complete all as specified.
S & F in repairs Mild steel body window handles (Left or right) any size to steel windows & vents complete all as specified.
S & F in repairs Door seal as per trade pattern with powder coated aluminium strip 25-30 mm width length having suitable dia holes (for fixing screws) & synthetic strip at bottom to avoid entry of dust etc fixed complete all as specified.
Hacking out old broken glass any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing complete all as specified.
S & F Plain sheet glass panes cut to size required nexc 0.50 sqm each thickness 3 mm thick complete all as specified.
S & F figured glass pin headed type nexc 0.50 sqm each thickness 4 mm complete all as specified.
S & F in repairs 18 mm thick prelaminated particle board exterior grade with decorative choice laminations on one side & the other balancing white complete all as specified.
Supply & fix continuous paino hinges 40 mm width of flap mild steel body electro galvanised finish complete all as specified.
S&F of 100 mm long Hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified.
Checking and attending to Resucuring /easing and adjusting shutters of any description and in any position area exc 1 sqm but nexc 2 sqm incl taking down of shutter from frames & refixing in the same opening after completion of repair works complete all as specified.
Checking and attending to repairs to steel windows / vents incl necessary welding, rivetting, easing etc complete all as specified.
Checking and attending to Resucuring /easing and adjusting shutters of any description and in any position area n exc 1 sqm incl taking down of shutter from frames & refixing in the same opening after completion of repair works complete all as specified.
Sewage Checking and attending to complaints to Cleaning/removal of sewage block in the existing line in any depth from WC to first manholes or gully trap to manholes including cleaning of WC and testing of pipe by pouring water 100mm SGSW/RCC/CI pipe for ground floor qtr complete all as specified.
Checking and attending to complaints to Cleaning/removal of blockage in the existing line in any depth and bathroom to first manholes or kitchen to gully traps or gully trap to manholes including cleaning of bathroom and WHB trap and kitchen floor trap and testing of pipe by pouring water manhole 75mm SGSW/RCC/CI pipe for ground floor qtr complete all as specified.
Cleaning of manholes complete of any size and at any location incl taking out sludge and other material deposited in manhole and its disposal to a distance n exc. 50 M, Depth of manhole n exc 1.00 M complete all as specified.
All as per Ser item No 115.00, but Depth of manhole exc 1.00 M & n exc 2.00 M.
Cleaning/Removal of sewage block in the existing line incl cleaning of complete line laid at any depth and at any location between two consecutive manholes/gully trap, two consecutive manhole or gully trap to manhole incl testing the pipe by pouring water from manhole for 150mm bore SGSW/RCC pipe (NP2) complete all as specified.
All as per Ser item No 117.00, but 200mm bore SGSW/RCC Pipe (NP2).
Cleaning of septic tanks of any capacity & any size by taking out sludge (working condition is in foul condition) & removing the sludge to outside defence land in closed vehicle complete all as specified.
Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and getting out in soft and disintegrated rock complete all as specified.
All as per Ser item No 120.00, but exc 1.5 m depth as in soft and disintegrated rock complete all as specified.
Returning, filling in,including spreading, levelling, watering and well ramming in layers not exc 25 cm as in soft loose soil complete all as specified.
Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified.
M&L for Cement concrete 1:4:8 type D2 using 40 mm graded stone agg as in in foundations, filling and mass concrete complete all as specified.
M&L for cement concrete 1:2:4 type B1 using 20 mm graded stone agg as in copings, kneelers, apex stones, bed plates, kerbs lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, not provided including weathering, slightly rounded or chamfered angles and throating, complete all as specified.
Demolition of stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, complete all as specified.
M&L for Squared rubble walling Jodhpur type, regular coursed, well bonded, bedded and solidly hearted, built in CM 1:6 complete all as specified.
All as per Ser item No 127.00 above, but except stone.
Extra over to squared rubble walling, Jodhpur type regular coursed masonry for hammer dressing to face stones with maximum depression on face from a straight edge not exc 20mm and dressing face beds and joints as specified , brought upto courses complete all as specified.
M&L for 15 mm thick rendering in CM 1:4 as in manhole /septic tank etc finished even & smooth complete all as specified.
Dismantling of cast iron drain pipes, jointed in cement mortar and taking out of trenches & walls , if required 75/100 mm bore complete all as specified.
S & F in reapair of PVC (SWR) pipes 110 mm single socketed in any length with rubber ring joints, laid in trenches/ floor or in fixed in wall including securing with clamp & taking down pipe including all fitting etc tee, socket, bend complete all as specified.
S & F of PVC (SWR) pipes 75 mm single socketed in any length with rubber ring joints , laid in trenches/ floor or in fixed in wall including securing with clamp & taking down pipe including all fitting etc tee, socket, bend complete all as specified.
M&L for 75 mm Cast iron soil, sand cast pipe , waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors including all fitting etc tee, socket, bend complete all as specified.
M&L for 100 mm Cast iron soil, sand cast pipe ,waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors including all fitting etc tee, socket, bend complete all as specified.
M&L for 75 mm Cast iron soil, sand cast pipe ,waste and vent pipes in any length with or without ears, with cement joints, fixed in walls including all fitting etc tee, socket, bend complete all as specified.
M&L for 100 mm Cast iron soil, sand cast pipe ,waste and vent pipes in any length with or without ears, with cement joints, fixed in walls including all fitting etc tee, socket, bend complete all as specified.
S&F in repair PVC SWR bends of 110 mm bore complete all as specified.
S&F in repair PVC SWR bends of 75 mm bore complete all as specified.
S&F in repair PVC SWR tee of 75 mm bore complete all as specified.
S&F in repair Cast iron 100 mm vent cowl complete all as specified.
S&F in repair 75 mm bore cast iron Bends with oval acess door complete all as specified.
S&F in repair 110 mm bore cast iron Bends with oval acess door complete all as specified.
S & F in repair cat iron bends of 110 mm bore complete all as specified.
S & F in repair cast iron bends of 75 mm bore complete all as specified.
S & F in repair cast iron tee of 75 mm bore complete all as specified.
S & F in repair cast iron tee of 100 mm bore complete all as specified.
M&L in repair 75 mm Cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified.
M&L for Salt-glazed stoneware gully traps, square or round mouthed, type 'P' size 100 x 100 mm complete all as specified.
Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar 150 /200 mm bore complete all as specified.
M&L for 150 mm bore Salt-glazed stoneware drain pipes laid in trenches and jointed complete all as specified.
M&L for 150 mm bore Reinforced concrete pipes, class NP2, laid and jointed complete with collars complete all as specified.
M&L for 200 mm bore Reinforced concrete pipes, class NP2, laid and jointed complete with collars complete all as specified.
Material and labour for cutting into existing manholes for connecting new drains, for removing existing branch drain, making good to walling and rendering, cutting out branch channel, 150mm bore pipes complete all as specified.
M&L in repair for Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 110/ 75 mm bore pipe complete all as specified.
Demolition of Stone slabs and tiles of any description or thickness in manhole covers etc complete all as specified.
S&F 75mm thick Jodhpur type stone slab not exc 2m in length machine cut all face & along exposed edged size faced both sided as in manhole cover complete all as specified.
S&F machine made precast cement concrete blocks (interlocking paves) Rubberised finish coloured (lacquer Coated) of 60mm thick with 6mm top layers of anti abrasive material , M-35 Grade all as as per sample kept in GE Office and laid over 25mm thick sand filling layer & spreading fine sand over the tiles to fill in the joints & cleaning the same after filling of joints complete all as specified.
M&L for precast cement concrete laquer coated tiles 30cmx30cmx25-30mm thick machine pressed set jointd and pointed in neat cement slurry in floor complete all as specified.
M&L for 75mm thick cement concrete type B-1 1:4:8 (using 20mm graded crushed stone aggregate) as in sub base complete all as specified.
M&L for providing precast cement concrete type B-1 1:2:4 (using 20mm graded agg) as in kerb stone etc (of any section as approved) with plain faces , including chamfers,weathering,throating etc and setting in cement mortar 1:4 complete with joints to match complete all as specified.
M & L for Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, mounds, mitred/stopped end complete all as specified.
M&l for 25 mm thick Cement concrete type B-1, 1:2:4 (20mm graded aggregate) complete all as specified.
Internal Electrification Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, sockets, lamp holder and conduit etc. removing materials to store for taking credit and making good disturbed surfaces of walls, floors, etc complete all as specified. Note:- The damaged surfaces to be made good with plastering & applying colour wash in required coats to matching with existing surfaces as directed by Engineer-in-charge. Cost of the same deem to be included in quoted rates and nothing extra on this account admissible.
M&L Point wiring with 1.5 Sq. mm PVC insulated and unsheathed single core FRLS copper cable 1100 volts grade with Multi-stranded copper conductor 02 nun phase and netural one run for earthing and including PVC casing caping (heavy grade) and accessories fixed on walls/floors/ceilings etc alongwith continuous earth wire 1.5 Sq mm PVC insulated and unsheathed single core FRLS cable 1100 volts grade with stranded copper conductor and connected to common earth dolly, with and including 1.6 mm thick cadmium plated sunk MS pressed steel terminal boxes with 3 mm thick plastic laminated sheet cover fixed with brass screws complete for one light point controlled by one switch, One light / fan point controlled by one, one-way switch, SP, 6 Amps complete all as specified.
All as per Ser item No 165.00, but One socket outlet, 3 pin, 5 Amp, 230 volt flush type on same board.
All as per Ser item No 165.00, but One switch socket outlet, 3 pin, 5 Amp, 230 volt flush type on independent board.
All as per Ser item No 165.00, but One bell/buzzar point controlled by one bell push independent
All as per Ser item No 165.00, but herein before but with 4 sqmm cable for one 3 pin 15 Amp switch socket outlet and using 4 sqmm PVC single core copper conductor cable multistranded as earth wire complete all as specified.
M&L for point wiring with two single core 1.5 Sq.mm size multistranded FRLS copper conductor PVC insulated cables and one single core 1.5 Sq.mm size green colour PVC insulated,multistranded copper conductor PVC cable as earth continuity conductor,1100 volts grade (02 nun phase and netural one run for earthing), complete drawn in and including rigid PVC CONDUIT and conduit accessories,confirming to IS specifications,concealed in wall fixing on ceiling /trusses with suitable clamps , screws etc, including 1.6 mm thick MS terminal boxes with 3 mm thick plastic laminated sheet top cover fixed with cadmium plated iron screws for mounting switches, sockets, fan regulators etc.,including connecting up and testing, One light / fan point controlled by one, one-way switch, SP, 6 Amps complete all as specified.
All as per Ser item No 170.00 but One socket outlet, 3 pin, 5 Amp, 230 volt flush type on same board.
All as per Ser item No 170.00 but One switch socket outlet, 3 pin, 5 Amp, 230 volt flush type on independent board.
All as per Ser item No 170.00 but One bell/buzzar point controlled by one bell push independent.
All as per Ser item No 170.00 but herein before but with 4 sqmm cable for one 3 pin 15 Amp switch socket outlet and using 4 sqmm PVC single core copper conductor cable multistranded as earth wire complete all as specified.
Supply and fix switch piano, flush type, single pole, one way, 5 Amps 230 Volts ISI Marked complete all as specified.
Supply and fix in repair switch piano, flush type, single pole, one way, 5 Amps 230 Volts ISI Marked complete all as specified.
Supply and fix in repair switch piano, flush type, single pole, one way 15 Amps 230 Volts ISI Marked complete all as specified.
Supply and fix socket outlet 2-in-1, 3 pin, 6 Amps, flush type with shutter, ISI Marked complete all as specified.
Supply and fix in repair socket outlet 2-in-1, 3 pin, 5 Amps, flush type with shutter, ISI Marked complete all as specified.
Supply and fix in repair of socket outlet 2 in 1, 3 pin, 5 and 15 Amp flush type with shutters, ISI Marked complete all as specified.
Supply and fix switch socket combination 2-in-1, 3 pin, 5 Amps, flush type with shutter, ISI Marked complete all as specified.
Supply and fix in repair switch socket combination 2-in-1, 3 pin, 5 Amps, flush type with shutter, ISI Marked complete all as specified.
Supply and fix switch socket combination 2 in 1, 3 pin, 5 and 15 Amp flush type with shutters, ISI Marked complete all as specified.
Supply and fix in repair switch socket combination 2 in 1, 3 pin, 5 and 15 Amp flush type with shutters, ISI Marked complete all as specified.
Supply and fix electronic regulator, 100W, 250V flush type on the exiting phenolic laminated sheet etc complete all as specified.
Supply and fix in repair electronic regulator, 100W, 250V flush type on the exiting phenolic laminated sheet etc complete all as specified.
Supply and fix ceiling rose, surface bakelite, three terminals complete all as specified.
Supply and fix in repair of ceiling rose, surface bakelite, three terminals complete all as specified.
Supply and fix Lamp Holder PVC/polycarbonate type with back plate ISI Marked for fixing bulbs complete all as directed by EIC for batten fitting.
Supply and fix in repair Lamp Holder PVC/polycarbonate type with back plate for fixing bulbs complete all as directed by EIC for batten fitting.
Supply and fix in repair Pin Top 15 Amp complete all as specified.
Supply and fix buzzer, ding dong AC 230 Volt, Single pole complete all as specified.
Supply and fix in repair Bell multi Musical type AC 230 Volt, Single pole complete all as specified.
Supply and fix in repair Bell push, AC 230 Volt, Single pole complete all as specified.
Supply and fix SPN DB's, 240 V, double door100 amps rated bus bar, 12 way complete all as specified.
All as per Ser item No 195.00, but 8 way.
All as per Ser item No 195.00, but 4 way.
Supply and fix MCB SPN 32 Amps 240 volts complete all as specified.
Supply and fix MCB SP 6 Amps to 32 Amps 230 Volt complete all as specified.
Supply and fix in repair MCB SP 6 Amps to 32 Amps 230 volt complete all as specified.
Supply and fix in repair Modular metal flush box with white cover plate with frame for mounting, switches, sockets, fan regulator, etc. 3 module Note:- (i) Switches, sockets, fan regulator, etc. will be measured and paid seperately under relevent items.
All as per Ser item No 201.00, but 6 module
All as per Ser item No 201.00, but 8 module cover only
All as per Ser item No 201.00, but 12 module
Supply and fix in repair switch modular 5/6 Amp single pole, one way 1 module complete all as specified.
Supply and fix in repair switch modular 15/16 Amp single pole, one way 1 module complete all as specified.
Supply and fix in repair Bell push modular 6 Amp single pole, one way 1 module as complete all as specified.
Supply and fix in repair Fan Regulator modular 120W single pole, one way 2 module as complete all as specified.
Supply and fix in repair Socket modular 5/6 Amp single pole, 2/3 pin 2 module as complete all as specified.
Supply and fix in repair Socket modular 6/16 Amp single pole, 2/3 pin 2 module as complete all as specified.
S&F in repair Metal Clad Plug and socket with box 20 Amp with MCB single pole complete fixed properly on wall surface with the provisioning of suitable sizes of bolts, nuts, washer and to connect by using cable PVC insulated copper stranded conductor of size 4 Sqmm as per specification complete all as specified.
Supply and fixing in repair PVC cassing capping 20 mm size on existing sub main wiring/point wiring any size and prepare the existing surface in good condition complete all as specified.
Supply and fixing in repair PVC cassing capping 25 mm size on existing sub main wiring/point wiring any size and prepare the existing surface in good condition complete all as specified.
Supply and fixing in repair PVC Ceiling rose back plate surface mounted round type with screw complete all as specified.
Supply and fixing in repair Metal plug and socket boths 20A 3 phase 3 pin as per IS 8804 suitable for existing metal clad box complete all as specified.
M&L for replacement PVC rectangular block for mounting switches,sockets,fan regulator etc with 3 mm thick plastic laminated sheet cover of size 100mmx100mmx50mm deep complete all as specified.
M&L for replacement PVC rectangular block for mounting switches,sockets,fan regulator etc with 3 mm thick plastic laminated sheet cover of size 175mmx100mmx50mm deep complete all as specified.
M&L for replacement PVC rectangular block for mounting switches,sockets,fan regulator etc with 3 mm thick plastic laminated sheet cover of size 250mmx200mmx50mm deep complete all as specified.
Supply and fix in repair PVC Junction box with cover 25mm as per site requirement complete all as specified.
S&F in repair of Plastic laminated sheet 3mm thick fixed with screws complete all as specified.
S&F in repait Fan capacitor 2.5 MFD complete all as specified.
Kusum Traders
S AND S Constructions
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .