Tender for work of Fault finding, Under ground cable jointing, termination in emergency situation various scheme under Vapi Town Sdn under of Vapi Rural Division.

Sr. No. Item Code No. Description Unit Rate

Labour charge for excavation of cable trench of 400mm width x 1200mm depth, in any type of soil for laying of

1 9925000001 cable of size up to 240 mm2 (For additional cable 200 mm additional width shall be considered i.e. half trench Meter

length is to be considered

Labour charge for excavation of cable trench of 600mm width x 1200mm depth, in any type of soil for laying of

2 9925000002 cable of size up to 240 mm2 (For additional cable 200 mm additional width shall be considered i.e. half trench Meter

length is to be considered

Labour charge for excavation of cable trench of 400mm width x 1500mm depth, in any type of soil for laying of

3 9925000003 cable of size up to 240 mm2 (For additional cable 200 mm additional width shall be considered i.e. half trench Meter

leng th is to be considered

Labour charge for laying of 11kV / 22 kV XLPE Cable of size up to 240 mm2 & preparation of sand layer 100mm

thick, in the cable trench & covering the cable with 150 mm dia (Outer), thickness 25 mm, 1.0 meter long RCC

4 9925000004 half round muffs and providing and fixing of 4inch width yellow colour polyethylene tape with Meter

printing"CAUTION ELECTRIC CABLE BELOW' at 0.75 m depth from ground surface after laying cable in trench.

This will provide indication that electric cable is passing underground so as to protect cable from mechanical

injuries, refilling the same, as per Instruction of E gineer in Charge (EIC) .

Labour charge for excavation of 2100mm long X 1200mm wide x 1200 mm deep joint pits for installation of 11-

5 9925000023 kv/22-kv straight through joints as per instruction of engineer in charge & covering the cable with 150mm dia NO

( outer ) ,thickness 25 mm, 1.0 meter long RCC half round muffs & refilling same as per instruction of EIC.

6 9925000019 Supply & fixing of heat & shrink type end termination ( Indoor) for up to 11kv 3C x 185 mm2 size XLPE NO

cable( using appoved make outdoor cable kit as per DGVCL technical specification )

7 9925000017 Supply & fixing of heat & shrink type end termination (outdoor) for up to 11kv 3C x 185 mm2 size XLPE NO

cable( using appoved make outdoor cable kit as per DGVCL technical specification )

8 9925000032 Supply & fixing of heat & shrink type end termination ( Indoor) for up to 11kv 3C x 240 mm2 size XLPE NO

cable( using appoved make indoor cable kit as per DGVCL technical specification )

9 9925000030 Supply & fixing of heat & shrink type end termination (outdoor) for up to 11kv 3C x 240 mm2 size XLPE NO

cable( using appoved make outdoor cable kit as per DGVCL technical specification )

10 9925000021 Supply & fixing of heat & shrinkable straight through joint for up to 11kv 3C x 185 mm2 size XLPE cable ( Using NO

approved make outdoor type kit as per DGVCL technical specification )

11 9925000034 Supply & fixing of heat & shrinkable straight through joint for up to 11kv 3C x 240 mm2 size XLPE cable ( Using NO

approved make outdoor type kit as per DGVCL technical specification )

12 9925000025 Testing of Cable at various point and commissioing the feeder as per instruction of Engineering in charge.test NO

result shall be submitted by contractor with bill

Labour charge for erecting of 11kV / 22 kV XLPEcable of size up to 240 mm2 on DP Structure with fixing of

13 9925000014 Nos polymer cleats on top and middle part.Polymer cleats, nut bolts etc. fixing material to be provided by PER JOB

Providing & fixing of 6.11kg/cm2 , class-4,Green color, 110mm O.D. ,8.5mm thickness H.D.P.E. pipe confirms to

IS 4984 and BIS certification on the erected DP structure for the mechanical protection of cable by inserting the

14 9925000015 cable inside HDPE pipe. The HDPE pipe shall be erected in such a way that 300mm shall be below the ground PER JOB

level and the rest 2700 mm shall be supported on the DP Structure with 01 No Polymer cleat.All materials

TOTAL ESTIMATE-TEN LACS RUPEES ONLY

Note :- All Rates are Excluding of GST.

Executive Engineer (O&M),

D.G.V.C.L.,Vapi Rural Division.

1. DGVCL will provide key material like M.S. materials,ABC/Bare conductors,PSC/RSJ Poles,Insulators,Fabricated

materials etc. to the contractor.2.All fabricated items shall be fabricated as per DGVCL approved drawing and

by welding rods confirming to the relevent ISI specification and as directed by Engineer in charge.3.Necessary

electricity connection for fabrictated items shall be provided by DGVCL on payment of required charge for

connection & electricity bill of the same shall be paid by the agency.4.All the rates are inclusive of PF and

Exclusive of GST applicable time to time.5.All steel material are to be painted as below:(a) Scrubbing of rusted

surface properly before applying the paints on to the RSJ poles & steel fabricated materials of RSJ/PSC poles is

must required.(b) Two coats of approved ISI mark red oxide (primer) is to be properly painted for the RSJ poles

& steel fabricated materials of RSJ/PSC poles. (c) Two coats of approved ISI mark silver paint (i.e. triple mangoes

or equivalent quality silver paint) is to be properly painted on to the RSJ poles & steel fabricated materials of