Periodical renewal on link road from Km.8/500 of (T-02) to Phoolpur Shamshergarh road km. 0/0 to 1/435 (SH-P/L wearing G-III for filling pot holes for profile correction and 30mm. thick bituminous concrete in km. 0/0 to 1/435)(Under Special Incentive

Amount

Providing , laying,spreading and compacting stone aggegates of specific sizes to water bound macadam specification inluding spreading in uniform thickness,hand packing,rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming,stone screening to fill-up the interstices of coarse aggregate,watering and compacting to the required density Grading 3 as per Technical Specification Clause 405.ncluding spreading including hauling of material in all leads, lifts as per the entire satisfaction and direction of Engineer-in-charge.

Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm (Zero decimal seven zero to one kilogramme per square metre) using mechanical means as per Technical Specification Clause 502 including haulage of materials with in all leads, lifts and carriage of materials and as per the directions of the Engineer-in-Charge.

Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm (Zero decimal two five to zero decimal three zero killogramme per square metre) on the prepared dry and hungry bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503. including haulage of materials with in all leads, lifts and carriage of materials and as per the directions of the Engineer-in-Charge.

Providing and laying 30mm. Thick bituminous concrete with 100-120 TPH batch type hot mix plant producing an agerave output of 75 tonnes per hour using crushed aggregates of specified grading , prmixed with bitumenous binder @ 5.4 to 5.6 percent of mix and filler, teransporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level an alignment, rolling with smooth wheeled, vibratory and tandem rollrs to achieves the desired compaction as per MORTH specification clause No. 509 complete in all respects including carriage of materials with in a leads, lifts and other incidentals complete as per entire satisfaction of the Engineer-in-charge.

Manoj Chawla

Mumtaj Ali Civil Contractor

Ishi Infra