Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹13.7 LAccepted-AOC | L1 | Accepted-AOC Accepted | |
| 2 | L2₹26.7 L+₹13.0 L (94.4%)Rejected-AOC HRBC OFFICE COMPOUND CANTEEN BUILDING 1ST FLOOR MUNSHI PREMCHAND SARANI KOLKATA | ALIPURDUAR | WEST BENGAL | 735204 | L2 | Rejected-AOC Rejected |
| Sl No | Description | Qty | Unit | ATANU GANGULY L1 | THE SHALIMAR WORKS (1980) LTD. L2 |
|---|---|---|---|---|---|
| 1.00 | Beaching, blocking, unblocking including dock hire and mooring charges as require to be done for complete repair of vessels. Blocking is to be done at sufficient height for underwater inspection, scrapping, chipping, wire brushing, cleaning, repairing and painting as per under supervision of IRS/ IWT surveyor. | 1 | job | 1,95,000 ₹1,95,000 Lowest | 2,40,000 ₹2,40,000 |
| 2.00 | Ultrasonic testing is to be carried out of underwater hull, deck plate, and hull to LWL, ship side plate for thickness as per direction of EIC and inspection of IRS surveyor. | 350 | spot | 69 ₹24,150 | 66 ₹23,100 Lowest |
| 3.00 | Cropping and renewal of under water plate, deck plate, shipside plate and other fitment after ultrasonic testing as per under supervision of IRS/ IWT surveyor and as per direction of EIC. As per report of ultrasonic test including labour charges and cost of spare/ material (MS plate as per sample). | 1.5 | ton | 1,38,650 ₹2,07,975 | 1,36,000 ₹2,04,000 Lowest |
| 4.00Mud box, sea valve to be checked repaired and cleaned as per direction of EIC and inspection of IRS surveyor. | |||||
| 4.10 | Labour charge | 1 | Comp. job | 20,000 ₹20,000 | 10,000 ₹10,000 Lowest |
| 4.20Cost of spare and machining charges on actual plus 10% basis | |||||
| 5.00 | Chipping, scrapping , wire brusing and cleaning is to be done for painting of vessel from keel to water level.painting of the underwater hull plate and side plate to be done by 3 coat as per painting scheme, marine quality paint after applying 1 coat of anticorrosive paint/ primer from Keel to WL as per direction of EIC and inspection of IRS surveyor & EIC. | 460 | Sqm | 240 ₹1,10,400 Lowest | 267 ₹1,22,820 |
| 6.00 | Chipping, scrapping , wire brusing, cleaning and painting is to be done for painting of the entire vessel side shell plate from LWL to main deck, superstructure (cutter unit, spud carriage unit, dredge discharge pipe, ballast tanks, hatches, engine room, man holes, bathroom, bilges, bollards, wheel house, crane,railing including all fitments are properly cleaned and to be painted by 2- coat marine quality paint after applying 1- coat of anticorrosive paint/ primer. | 1,350 | sqm | 240 ₹3,24,000 Lowest | 263 ₹3,55,050 |
| 7.00Entire hydraullic system, solenoid valve, control room gauge , hydraullic cooler ,emergency hydraullic system etc. to be checked and calibrated and also leakage to be arrested with renewal of its gaskets,seals,o-rings,high pressure hoses,sensors including high pressure line valve,hydraullic system filter etc as required and ensure free air operation as per manufacturer norms and direction of IRS/ EIC. | |||||
| 7.10 | Labour charges | 1 | comp. job | 35,000 ₹35,000 | 25,500 ₹25,500 Lowest |
Tender Value
₹19.7 L
EMD Value
₹40,000
Closing Date
11 Jul 2025, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Director
Multi Modal Terminal Port Ralhupur Ramnagar Varanasi UP Pin 221008
Dry-dock repair of CSD Jalangi in NW-1 for the F.Y.2025-26
2025_IWAI_867601_1
IWAI/VNS/MM(15)/CSD Jalangi/2025-26
Open Tender
Marine Services
Works
Varanasi
Please refer Tender documents.
3 documents required · 3 mandatory
₹2,360
Yes
IWAI FUND SD EMD
₹40,000
Yes
19 Aug 2025
5 Jul 2025
14 Jul 2025
5 Jul 2025
11 Jul 2025
5 Jul 2025
Amount
Beaching, blocking, unblocking including dock hire and mooring charges as require to be done for complete repair of vessels. Blocking is to be done at sufficient height for underwater inspection, scrapping, chipping, wire brushing, cleaning, repairing and painting as per under supervision of IRS/ IWT surveyor.
Ultrasonic testing is to be carried out of underwater hull, deck plate, and hull to LWL, ship side plate for thickness as per direction of EIC and inspection of IRS surveyor.
Cropping and renewal of under water plate, deck plate, shipside plate and other fitment after ultrasonic testing as per under supervision of IRS/ IWT surveyor and as per direction of EIC. As per report of ultrasonic test including labour charges and cost of spare/ material (MS plate as per sample).
Mud box, sea valve to be checked repaired and cleaned as per direction of EIC and inspection of IRS surveyor.
Labour charge
Cost of spare and machining charges on actual plus 10% basis
Chipping, scrapping , wire brusing and cleaning is to be done for painting of vessel from keel to water level.painting of the underwater hull plate and side plate to be done by 3 coat as per painting scheme, marine quality paint after applying 1 coat of anticorrosive paint/ primer from Keel to WL as per direction of EIC and inspection of IRS surveyor & EIC.
Chipping, scrapping , wire brusing, cleaning and painting is to be done for painting of the entire vessel side shell plate from LWL to main deck, superstructure (cutter unit, spud carriage unit, dredge discharge pipe, ballast tanks, hatches, engine room, man holes, bathroom, bilges, bollards, wheel house, crane,railing including all fitments are properly cleaned and to be painted by 2- coat marine quality paint after applying 1- coat of anticorrosive paint/ primer.
Entire hydraullic system, solenoid valve, control room gauge , hydraullic cooler ,emergency hydraullic system etc. to be checked and calibrated and also leakage to be arrested with renewal of its gaskets,seals,o-rings,high pressure hoses,sensors including high pressure line valve,hydraullic system filter etc as required and ensure free air operation as per manufacturer norms and direction of IRS/ EIC.
Labour charges
Cost of spare and machining charges on actual plus 10% basis
Entire rubber packing of all manhole cover of all tanks to be renewed and tightened with studs and bolts.
Main spud (port & starboard side) hydraullic hose wooden clamp is to be renewed along with spud carriage limit switches to be rectified and replaceed as per direction of IRS/EIC
Main deck guard railing is to be straightened , flared, and welded at the damage points.
Labour charge
Cost of spare and machining charges on actual plus 10% basis
The servicing of main engine (Make: Caterpiler, Model: CAT3508DI-TA, SL. NO. 7SM00866, Capacity: 855 BHP) with check all safety system, digital panel, calibration parameters, RPM meter, gauges from wheel house. Air starting valve, air starting motor and box cooler damaged, injector is malfuntioning is to be replaced/ repair by AUTHORISED DEALER as per direction of IRS surveyor/ EIC.
Labour charges
Cost of spare and machining charges on actual plus 10% basis
Aux. engine (Make: Caterpiler, Model: CAT3306 DI-TA, SL.NO. 64Z36168, Capacity : 285 BHP) all safety system and calibration parameters (gauges, fuel rack rpm meter) are to be serviced / repair. Box cooler damaged, injector is malfuntioning is to replaced/ repair by AUTHORISED DEALER as per direction of IRS Surveyor/EIC.
Labour charges
Cost of spare and machining charges on actual plus 10% basis
AC/ DC electrical lines to be checked in Dredger cabin, engine room, emergency lights, DC light, navigation lights, flood lights, switch and socket, switch board, electrical panel board, emergency alarm to be checked and rectify the defects as as per direction of EIC.
Labour charges
Cost of spare and machining charges on actual plus 10% basis
Gland pump of main engine for flushing is to repaired also leakage to be arrested or if required renew the pump by Authorised dealer with same specification as per OEM standard.
Labour charges
Cost of spare and machining charges on actual plus 10% basis
Emergency fire pump (Make: Kirloskar) to be required to repaired/ replaced by Authorised dealer as per OEM standard.
Labour charges
Cost of spare and machining charges on actual plus 10% basis
Quick closing valves including lever is to be repaired or replaced as per OEM standard on recommendation of IRS surveyor/EIC.
Deck crane chain pulley system is to be repaired or replaced as per OEM standard.
Leakage of air observed from fusible plug of air bottle is to be repaired or replaced as per OEM standard.
Labour charge
Cost of spare and machining charges on actual plus 10% basis
Dredger discharge MS pipe on main deck found with dubbler plate at various places to be gauged and repaired/ renewed as per OEM standard.
Dredger discharge pressure gauge is to be repaired or replaced as per OEM standard.
Labour charge
Cost of spare and machining charges on actual plus 10% basis
Dredging control cabin Door locks, Toilet door, window locks and window glass is to replaced (as per requirement) with Standard quality as approved by EIC.
Main deck fire box glass found broken and same is to be replaced or repaired as approved by EIC.
Battery box found damage is to be replaced with same standard quality material as approved by EIC.
Wheel house master cabin chair found broken is to be repaired/ replaced with standard quality material as per recommendation of IRS surveyor/EIC.
Labour charge
Cost of spare and machining charges on actual plus 10% basis
Dredger discharge nozzel 02 no. is to be repaired/serviced as per OEM standard.
Labour charge
Cost of spare and machining charges on actual plus 10% basis
Cutter ladder (Port & starboard side) generate Abnormal noise during operation due to damage of main bush is to be serviced/repaired as per OEM standard.
Cutter motor speed found reduce is to repaired/ service as per OEM standard.
Labour charge
Cost of spare and machining charges on actual plus 10% basis
Both side Anchor Swing pulley bush found damage is to repaired/ replaced as per OEM standard.
A-frame pulley greasing line found jammed is to be serviced as per OEM standard.
Labour charge
Cost of spare and machining charges on actual plus 10% basis
THE SHALIMAR WORKS (1980) LTD. (BID ID -3243733)
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .