Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L.1₹73.5 LAccepted-AOC | L.1 | Accepted-AOC lowest bidder | |
| 2 | L.2₹75.6 LRejected-Finance | L.2 | Rejected-Finance Highest bidder |
Tender Value
₹78.9 L
EMD Value
₹1.1 L
Closing Date
24 Jun 2022, 10:20 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
DFO Nachan
DFO Nachan at Gohar District Mandi HP
Forest Inspection Hut
2022_FD_61693_1
2706B
Open Tender
Civil Works - Buildings
Item Wise
150 days
Gohar
Please refer Tender documents.
9 documents required · 9 mandatory
₹2,000
Yes
DFO Nachan
₹1.1 L
Yes
13 Sept 2022
13 Jun 2022
24 Jun 2022
13 Jun 2022
24 Jun 2022
14 Jun 2022
13 Jun 2022 - 13 Jun 2022
120 days
Amount
Site Development:- Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing: 1:5:10 (1 cement : 5 coarse sand) : 10 graded stone aggregate 40 mm nominal size)
Centering and shuttering including strutting, propping etc. and removal of form work for walls (Any thickness), pilasters, buttresses, plinth and string courses etc
Providing weapholes in brick masonry / stone masonry /plain reinforced concrete abutment, wing wall, return wall with 100 mm dia PVC pipe extending through the full with of the structures with slop of 1(v):20(H) towards drawing face complete as per drawing and technical specification clauses 614, 709, 1204.3.7
Stone filling behind Retaining wall/ breast walls as per the direction of Engineer-in-charge incouding carriage of materials with in all leads, lifts and other incidentals.
Main Building;-Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.
Poviding and laying in position cement concrete of specified grade excluding the cost of centering and shuttering- All work up to plinth level 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 20mm nominal size.)
Making plinth protection 50mm thick of cement concrete 1:3:6 (1cement : 3 coarse sand (zone-III) : 6 graded stone aggregate 20mm nominal size) over 75mm thick bed of dry brick ballast 40mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.
Centering and shuttering including strutting, propping etc. and removal of form for:-i) Foundation, footings, bases of columns etc. for mass concrete.
ii)Suspended floors, roofs, landings, balconies and access platform.
iii)Lintels, beams, plinth beams, girders, bressumers and cantilevers.
iv)Columns, Pillars, Piers, Abutments, Posts and Struts.
v)Stairs, (excluding landings) except spiral-staircases.
vi)Edges of slabs and breaks in floors and walls under 20 cm wide.
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.:-All work upto Plinth Level.
All work above plinth level upto floor V level
Steel reinforement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level :-Mild steel and medium tensile steel bars
Above Plinth level
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure avobe plinth level up to floor V level in all shapes and sizes in:-Cement Mortar 1:6 (1 cement : 6 coarse sand)
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.Cement mortar 1:3 (1 cement : 3 coarse sand)
Stone filling under floor as per the direction of Engineer-in-charge incouding carriage of materials with in all leads, lifts and other incidentals.
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 Cement : 2 coarse sand) : 4 graded stone aggregate 40 mm nominal size)
Providing and fixing chromium plated brass curtain rod having wall thickness of 1.25mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc, wherever necessary complete. 20mm dia
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. incouding priming coat with approved steel primer all complete. Fixed to steel windows by welding
Providing and fixing 19mm thick ( ninteenmilimetre) made of action teasa thick terramite resistant water proof commercial board box including shelves and shutters, the back side of cupboard/cabinet of 8mm(Eight milimetre) thick ply and cut portions of shelves shall be finished with 6mm six milimetres) hard board edging. The cut portion of shutters from all the sides shall be finished with 12 mm thick hard wood edging. the shutters from out side shall be finished with 1mm thick laminated of approved shade includng piano hinges and magnetic catcher with all ascessories as per detail architectural drawing No. 195/1 to 199/1 including carriage of materials with in all leads, lifts and other incidentals.
Providing and fixing factory made uPVC white colour casement/ Casement cum fixed glazed door comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws, etc. Profile of frame & sash shall be mitred cut and fusion at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in- Charge. (Single / double glass panes and silicon sealent shall be paid separately). Casement door with top hung ventilator with 3D and S.S. friction hinges (400 x 19 x 1.9 mm) made of (big series) frame 67 x 64 mm, sash 67 x 110 mm & mullion 67 x 80 mm all having wall thickness of 2.3 ±. 0.2 mm and single glazing bead / double glazing bead of appropriate dimension.(Area of door upto 2.50 sqm
Providing and fixing factory made uPVC white colour casement/casement cum fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately) Casement cum fixed panel window having both end single casement panel, middle fixed panels and at top completely fixed ventilator with S.S friction hinges (350 x 19 x 1.9) made of (big series) frame 67 x 60 mm , sash 67 x 80 mm & mullion 67 x 80 mm all having wall thickness of 2.3 ± 0.2 mm and single glazing bead/double glazing bead of appropriate dimension. (Area of window above 3.00 sqm upto 5.00 sqm).
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). 2nd class teak wood
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters
Providing and fixing angle iron cupboard frames manufactured fromM.S. Angle iron section 25x25x5mm thickness including hinges jamb, lock jamb, beed and if required anlgle thrashold of mild steel angle 25x25mm welded or rigidly fixed by mechanical means, lugs with split end tails to each jamb including steel butt hinges 2.5mm thick with provision for locking arrangement and shock observer as specified and applying a coat of approved steel primer after preteatment of the surface as directed by Engineer-in-charge.
Providing and fixing steel wire gauge shutter in Z-section using galvanised M.S wire gauge of I.S. gauge designation 85g with wire of dia 0.56mm for doors, windows and clerestory windows with metal beading of approved quality and shape -section with necessary screws and applying a coat of primer with red lead paint complete as per approved design.
Providing and laying 19 mm thick commercial board shuttres with hard wood edging and PGI sheet linning inside of shutter of approved size including bright finished iron but thinges etc. complete as per detailed arch. Drawing for the work.
Providing and fixing aluminium tower bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete.:-250x10mm
Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. Twin rubber stopper
Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868). Transparent or dyed to required colour or shade, with nuts and screws etc. complete.300x16mm
P/F.65x35 mm special quality chromium plated brass cup board lock with six leaves including necessary screws etc. complete.
Providing and fixing aluminium handles, ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete. :-125mm
P/F 100mm bright finished hard drawn hooks and eye.:-100mm
Providing and fixing oxidised M.S. double acting spring hinges with necessary screws etc. complete.:-150mm
Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). Size of Tile 600x600 mm
Providing and fixing50mm thick wooden plank flooring over 50X50 mmangle iron frame work (frame work to be paid separately)2nd class deodar wood
Providing and fixing 12mm thick water proof ply finished with laminated of approved grade with 15 cm wide band of Rai wood fixed over 2nd class deodar wood frame workof size 35X50 mm with decorative bidding of size 25X12 mm on edges
Providing and fixing 1st quality ceramic glazed tiles of 300x450 conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete.
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc. Size of tile 600x600 mm
Marble stone flooring with 18 mm thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with :-Udaipur green marble
Providing and fixing 0.60mm ( Zero point sixty millimeter) thick pre-painted steel sheet of TATA/ /DUROSHINE in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 ( Twenty ) micron over 5 ( Five ) miocrons primer coating to back coat of polyster of 5 ( Five ) microns over 5 ( Five) microns primer coating including fixing with pre-painted iron J or L hooks, bolts and nuts , 6mm diametre with prepainted limpet and rubber washers complete with all accessories as required .
Providing and fixing ridges or hips 60cm. (Ninety centimetres) overall with 0.60mm (Zero point sixty millimeter) thick prepainted steel sheets TATA/ /DUROSHINE in roofing with hot dipped metallic zinc coated sheets with top coat of regular modified polyester organic coating of 20( Twenty ) microns over 5 ( Five ) micron primer coating + back coat of polyster of 5 ( Five) microns over 5 micro primer coating including fixing with prepainted iron, J or L hooks bolts and nuts ,6mm(Six milimetre) diametre and prepainted G.I limpet and bitumen washer complete with all accessories as required .
Providing and fixing valley 60cm overall 0.60mm thick prepainted steel sheet in roofing with hot dipped mettalic zinc coated sheet with top coat of regular modified polyster organic coating of back coat of polyster 5 microns over 5 microns primer coating including fixing with screws prepainted iron J or L hooks, bolts and nuts 6mm dia meter with prepainted GI limpet and bitumen washers complete with all accesories as required as per the direction of Engineer-in-charge.
Providing and fixing flushing 38cm overall with 0.60mm thick prepainted steel sheet in roofing with dipped metallic zinc coated sheet with top coat of regular modified polyster organic coating of 2omicrons over 5 microns primer coating Plus back coat of polyster of 5 microns over 5 microns primer coating icluding fixing with screws prepainted iron J or L hooks, bolts and nuts 6mm diametre with prepainted GI limpet and bitumen washers complete with all accesoriees as required as per the direction of Engineer-In-Charge.
Providing and fixing 15 cm wide, 45 cm overall semicircular plain G.S. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc., including making necessary connections with rain water pipes complete (0.80mm thick with zinc coating not less than 275 cm/m2
Providing and fixing M.S B.P sheet 1.66 mm to 2mm ( One point sixty six millimeter to two millimeter) thick in eaves board/decorative facia/soffits/ceiling including cutting , fixing and welding to steel roof members and applying a coat of red lead primer complete as per the direction of the Engineer-in-Charge (base member of steel work shall be measured and paid for separately)
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
Steel work welded in built up section/ framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.:-in grating framed guard bars, ladder, railing, bracket, gates and similar work
Providig and fixing on wal face PVC (D-Plast) rain water pipes of working pressure not less than 4.5 kg/sqm including filling the joints with approved adhesive complete. 110mm
Providing and fixing on wall faces PVC ( D-Plast) accessories for rain water pipes including filling the joints with approved adhesive complete.:-110mm dia PVC Plain bend
110mm dia PVC Shoc
Providing and fixing PVC clamps for 110 mm dia pipe
15 mm cement plaster on the rough side of single or half brick wall of mix 1:6 (1 cement : 6 fine sand)
15 mm cement plaster on the fair side of single or half brick wall of mix 1:6 (1 cement : 6 fine sand)
6 mm cement plaster of mix: 1:3 (1 cement : 3 fine sand)
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade New work (two or more coats) over and including water thinnable priming coat with cement primer
Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives (New work (Two or more coats applied @ 1.43 litre/ 10 sqm. over and incouding priming coat of exterior primer applied @ 0.90 litre/ 10 sqm.
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete
Painting with oil type wood presservative of approved brand and manufacture: (Old work (one or more coats)
Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm. Over an under coat of primer applied @ 0.75 ltr/ 10 sqm. Of approved brand and manufacture
Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture.:-other than white
Providing and fixing MS railing for stair case having balluster of 19mm x19mm square bar with a clear height of 85cm embedded in cement concrete steps and jointed with electrical/gas welding at top along with MS flat of 40mmx6mm size complete with a applying priming coat of red lead paint as per drawing specification and as per direction of Engineer-in-charge.
Providing and fixing railing for ramp having balluster of 25 mm dia hollow M.S pipe (ISG-18) GAUGE with a clear height of 75 & 90 as per detail @ 60 cm C/C jointing in C.C steps and jointed with electrical gas welding at top alongwith hand rail of hollow M.S. pipe with slip resistance 50 mm dia . (ISG-181 M.S flat of 50x5 mm complete and applying coating with red lead paint as per specification and direction of Engineer-in-Charge.
Providing and fixing MS railing for stair case having balluster of 19mm x19mm square bar with a clear height of 30cm embedded in Brick masonry wall with electrical/gas welding at top with hand rail 50mm dia of MS. pipe with a applying priming coat of red lead paint as per drawing specification and as per direction of Engineer-in-charge.
Providing and fixing moulded hand rail of M.S. hollow pipe 50mm dia welded in straight lenght over M.S. flat at top of vertical balusters including one coat of red oxide priming coat complete (M.S. flat & balusters of railings shall be mesaured & paid separetely.
Constructing Coursed rubble hammer dressed 'U' shape open surface drain with side wall. 15 X 23 cm (Fifteen into twenty three centimeter ) in cement mortar 1:6 ( One Cement : Six approved Sand) and inside plastering with cement mortar 1:3 (One Cement: Three approved Sand) including earth work and laying 10 cm (Ten Centimatre ) cement concrete in 1:5:10 (One Cement : Five approved Sand : Ten graded crushed stone aggregate) of 40 mm (Forty millimetres) nominal size and 7.5 cm (seven Point Five Centimatre ) cement concrete 1:2:4 (One Cement : Two approved Sand : Four graded crushed stone aggregate of 20 mm (Twenty millimetre) nominal size) and finished with a floating coat of neat cement complete as per standard design.
Water supply and sanitary installation:-Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work.:- ( a ) 20 mm nominal bore
( b ) 32mm nominal bore
( c ) 15 mm nominal bore
Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete :. 25 to 40 mm nominal bore
Fixing water meter and stop cock in G.I. pipe line including cutting and threading the pipe and making long screws etc. complete (cost of water meter and stop cock to be paid separately).
Providing and fixing Polyethelene-AluminiumPolyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing. This includes the costs of cutting chases and including testing of joints complete as per direction of the engineer in charge. Concealed work, including cutting chases and making good the wall etc.:-I) 2532 (32 mm OD) pipe
( ii ) 2025 (25 mm OD) pipe
(iii) 1620 (20 mm OD) pipe
(iv) 1216 (16 mm OD) pipe
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap,10 litre low level white P.V.C. flushing cistern, includingflush pipe, with manually controlled device (handle lever)conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests
Providing and fixing white vitreous china Angel C8915 wall mounting water closet of size 455x355x355 mm of approved shape including seat cover, and cistern fittings, nuts,bolts and gasket etc of Perryware , Cera,Jaquar, Hindware or equivelent complete as per direction Engineer-in-charge.
Providing and fixing white vitreous china CURSE SET WC cat No. S1021114P extended wall mounting water closet of size 780x370x810 mm of approved shape including providing & fixing white vitreous china cistern Cat No. S1060106 with dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc of Perryware , Cera,Jaquar, Hindware or equivelent complete as per direction Engineer-in-charge .
Providing and fixing viterous China wash basin C8863(505x405x155) Basin (half Pedestal) In White Shade of Perryware /jaquar/ Hindware/ Cera or equivalent including cutting holes & making good the same and carriage of materials within all leads and lifts :- Of Superior quality as per direction of Engineer-Charge.
Providing and fixing viterous China wash basin CASCADE NXT C0404 Basin With Half Pedastal C0379 In White Shade of Perryware /jaquar/ Hindware/ Cera or equivalent including cutting holes & making good the same and carriage of materials within all leads and lifts :- Of Superior quality as per direction of Engineer-Charge.
Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required 510x1040 mm bowl depth 250
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Semi rigid pipe 40mm dia
Providing and fixing uplasticised PVC connection pipe with brass unions 45 cm length 15 mm nominal bore
Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work 40mm dia)
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete
Providing and fixing C.P. brass long nose bib cock Cat no.CON 107KN Jaquar or equivalent single control of approved quality conforming to IS standards. 15 mm nominal bore
Providing and fixing C.P. brass long nose bib cock Cat no.OPP -15037PM Jaquar or equivalent single control of approved quality conforming to IS standards. 15 mm nominal bore
Providing and Fixing Swan neck pillar tap with left hand operating knob single control CON-CHR-123BKN of Jaquar or equivalent complete.
Providing and Fixing OPP-15001PM Pillar cock Jaquar or equivalent as per direction complete.
Providing and Fixing Angular stop cock with wall flange of opel prime no. CON 150083KN Stop Cock of jaquar or equavalent complete in all respect.
Providing and Fixing Concealed stop cock with wall flange of opel prime no. CON 083FTK Stop Cock PM single control of jaquar or equavalent complete in all respect.
Providing and Fixing Angular stop cock with wall flange of opel prime no. OPP-15053PM jaquar or equavalent complete in all respect.
Providing and Fixing Angular stop cock with wall flange of opel prime no. CON 053KN of jaquar or equavalent single control complete in all respect.
Providing and fixing C.P.Mixer for kitchen sink with casted swinging CON 309KN jaquar or equavalent complete In all respect
Providing and Fixing Soap dish recessed type stainless steel AHS-1531 of Jaquar or equivalent complete in all respect.
Providing and Fixing Soap dish stainless steel CAN -1131N of Jaquar or equivalent complete in all respect.
Providing and fixing Towel Rack with lower hanger No. AHS-1581H of hotelier series of JAQUAR, or equivalent of superior quality as per direction of Engineer-Charge.
Providing and fixing Corner glass self with bract No.ACN-1173 of hotelier series of JAQUAR, ESS-ESS or equivalent of superior quality as per direction of Engineer-Charge.
P/F Glass shelf 550 mm long with C.P. Brass bracket and guard rail no. AQN-7771 of Jaquar or equivalent fixed with C.P. Brass screws etc complete.
P/F U Shaped wall mounted rail with hinges 600 x 100mm Cat No. B2210107 and Wall Mounted Grab Bar 600mm Long CAT No. B2210106 jaquar or equivalent Superior quality as per direction of Engineer-Charge. Jaquar
Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge.
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :-25mm
Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) :-15mm
Providing and fixing Polyethelene-Aluminium-Polyethelene PE-AL-PE Composite tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 15 mm nominal bore
Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete 110 mm
Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete 150 mm
Providing and fixing PVC floor trap of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete. 110 mm X 90 mm
Providing and fixing PVC door bend with ovalaccess door, insertion rubber washer 3 mm thick bolts and nuts ISI marked complete including fixing with approved adhesive etc.:-I) 110mm dia
II) 150 mm dia
Providing and fixing PVC plain bend ISI marked including fixing with approved adhesive etc. complete.:-I) 110mm dia
II) 150mm dia
Providing and fixing PVC plain double equal branch ISI marked including fixing with approved adhesive etc. complete.:-I) 110mm dia
II) 150mm dia
Providing and fixing PVC single equal branch with oval access door, ISI marked insertion rubber washer 3 mm thick bolts and nuts complete including fixing with approved adhesive etc. complete:-I) 110mm dia
II) 150mm dia
Providing and fixing PVC collars ISI marked including fixing with approved adhesive etc.complete.:-I) 110mm dia
II) 150mm dia
Providing and fixing PVC clamps ISI marked of approved design with steel screws and rawal plugs etc. complete.:-I) 110mm dia
II) 150mm dia
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slabwith 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone- III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design :-Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (medium duty) 500 mm internal diameter, total weight of cover and frame to be not less than 116 kg (weight of cover 58 kg and weight of frame 58 kg) :-With Sewer bricks conforming to IS : 4885
Constructing soak pit 1.20x1.20x1.20 m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20 m long complete as per standard design.
Constructing masonry Chamber 90x90x100 cm inside, inbrick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ), i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design :-With common burnt clay F.P.S.(non modular) bricks of class designation 7.5
Roof Rain water harvesting structure:- earth work in excavation by mechanical means (Hydraulic excavator/manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan). Including dressing of sides and ramming of bottoms, lift upto 105 m, including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 m. All kind of soil
Dry stone pitching 15 cm thick including supply of stones and preparing surface complete.
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering-all work upto plinth level.:- 1:4:8 (1 cement: 4 coarse sand: 8 graded stone aggregate 40 mm nominal size
Centerring and shutering including structure, propping etc, and removal of form for:- 1) walls (any thickness) including attached, plasters, butteresses, Plinth and string courses etc. 2) Extra for shuttering, in circular work (20% of respective centering and shuttering items) Circular or curved in plan.
Steel reinforcement for RCC work including straightening, cutting, bending, placing in position and binding all complete upto plinth level and superstructure.:- Mild Steel and medium tensile steel bars.
Providing and laying in positions specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement-All work upto plinth level: 1:2:4 (1 cement: 3 coarsed sand): 4 graded stone aggregate 20 mm nominal size)
6 mm thick cement plaster in ceiling of mix:- in CM 1:3 (1 cement: 3 ine sand).
P/F of net/jali in inlet of down pipe.
Providing and fixing on wall face unplasticised rigid PVC rain water pipes conforming to IS: 13592 Type, A, including jointing with seal ring conforming to IS: 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. :- 110 mm dia mtr PVC inlet pipe from gutter down pipe to tank.
Providing and fixing GI pipes complete with GI fittings including trenching and refilling etc. :- 25 mm dia nominal bore.
Providing and fixing GI pipes complete with 20 mm dia nominal bore from tolu pump to PVC storage tank and connection to toilets.
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. :- 15 mm dia nominal bore from PVC storage tank to toilets.
Providing and placing on terrace (at all floor levels) polyethyne water storage tank, IS: 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank (500 ltr.)
P/f of float valve 25 mm dia brass in side of RWH tank.
P/f of tolu pump etc. complete.
Septic tank:-Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil asdirected, within a lead of 50 m. All kind of soil
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size)
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand) : 4 graded stone aggregate 20 mm nominal size)
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand) : 4 graded stone aggregate 20 mm nominal size)
Centering and shuttering including strutting, propping etc. and removal of form for:-Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.
Suspended floors, roofs, landings, balconies and access platform.
Edges of slabs and breaks in floors and walls
Steel reinforement for R.C.C. work including straightening, cutting, bending, placing in position and binding:-upto plinth level.
15 mm cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall.
KAUL SINGH
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .