SAMGRA SHIKSHYA MADYMIK AHIYAN KY ANTRGAT GIC KAMLESHWAR MUNAKOTE MI COMPUTER ROOM LIBRARY ROOM SCIENCE LABE PHYSICS LABE CHEMISTRY LABE AND ZOLOGEY LABE KA NIRMAN

Amount

Excavation in soil in Hilly Area by mechanical means Without useinng Dozer including cutting and trimming of side slopes and disposing of excavated earth with a lift upto 1.5 m and a lead upto 20 m as per Technical Specification Clause 1603.1

Excavation in foundation for retaining & breast walls in all types of soils and rocks including lead, lift and disposal of surplus material as per direction of engineer - in - charge

Random Rubble Stone Masonry laid in 1:6 cement and sand mortar,in breast walls, retaining walls, parapets, scuppers,etc.including supply of all material,labour,T&P and royaltiies etc.(As per PWD Uttarakhand specifications).

Random Rubble Masonary laid dry in breast wall,retaining wall, parapets,scupper etc. Including supply of all materials,labour,t & p& royality etc,required for proper complition of work.(As per PWD Uttarakhand specifications)

HP stone filling in back of walls including supply of all material,labour,T&P etc.required for proper completion of the work.

Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and rammingof bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size)

Random rubble masonry with hard stone in foundation and plinth i levellingup with cement concrete 1:6:12(1 cement:6 coarse sand aggregate 20mm nominal size)at plinth level with 1:6 C/S mortar.

P.C.C. 1:3:6 solid block masonary with 1:5 c/s mortar in forndation and plinth i/c all cost complete.

Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing:

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns,pillars, piers, abutments, posts and struts etc. up to floor five level,excluding cost of centering, shuttering, finishing and reinforcement 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)

Steel reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete Thermo-Mechanically Treated bars

Centring and shuttering including strutting, ropping etc. and removal of form for.

foundation,footing,bases of columns,etc.for mass concrete

Lintels,beams,plinth beams, girders,bressumers and cantilevers.

Columns,Pillars,Piers,Abutments,Posts and Struts.

Suspended floors, roofs, landings, balconies and access platform.

P.C.C. 1:3:6 solid block masonary with 1:5 c/s mortar in super structure i/c all cost complete.

Structural steel work riveted,bolted or welded in built up se trusses and framed work,including cutting,hoisting,fixing in and applying a priming coat of approved steel primer all complete:

Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size,with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles,including applying a priming coat of approved steel primer.

Providing and fixing factory made ISI marked steel glazed windows and ventilators, side /top /centre hung, with beading and all members such as F7D, F4B, K11 B and K12 B etc. complete of standard rolled steel sections, including priming coat of approved steel primer,

15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand)

12 mm cement plaster of mix :1:6 (1 cement: 6 fine sand)

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Earth & Bolder Filling in Plinth including all cost complete.

Cement concrete flooring 1:2:4 (1cement:2 coarse sand:4 grad finished with a floating coat of neat cement including cement slurry 40mm thick with 20mm nominal Size stone.

Providing and fixing glass strips in joints of metre terrazo/ cement concrete floors. 40 mm wide and 4 mm thick.

Providing and laying vitrified floor tiles in different sizes(thickness by the manufacturer) with water absorption’s less than 0.08% and IS: 15622 of approved make in all colours and shades,laid on 20mortar 1:4(1cement:4 coarse sand) including grouting the joints and matching pigments etc.,complete.Size of Tile 60x60 cm

Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.

Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying: (a) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. (b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. (c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around. (d) fourth and final layer of brick tiling with cement mortar (which will be paid for separately. (For the purpose of measurement the entire treated surface will be measured.)

12 mm cement plaster finished with a floating coat of neat cement of mix 1:3 C/F Sand.

Providing and fixing ISI marked flush door shutters conforming to I non-decorative type, core of block board construction with frame o wood and well matched commercial 3 ply veneering with vertical g bands and face veneers on both faces of shutters 35mmtkick.

Providing and fixing aluminium handles ISI marked anodised(anod less than grade AC10 as perIS:1868)transparent or dyed to req.125 mm

Providing and fixing aluminium tower bolts ISI marked anodised (a not less than grade AC 10 as per IS : 1868 ) transparent or dyed t or shade with necessary screws etc. complete. (i) 200x10mm

Providing and fixing aluminium sliding door bolts ISI marked anodi coating not less than grade AC 10 as per IS : 1868) transparent or colour or shade with nuts and screws etc. complete.(i)300x16mm

Providing and fixing aluminium hanging floor door stopper ISI mar (anodic coating not less than grade AC 10 as per IS : 1868) transp required colour and shade with necessary screws etc. complete.Twin rubber stopper

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade New work(two or more Coats)over & including priming coat with cement primer.

Finishing walls with Two coat Deluxe Multi surface paint system for interiors and exteriors including one coat of Special primer

Painting wood work with Deluxe Multi Surface Paint of required shade.Two or more coat applied @0.90ltr/10sqm over an under coat of primer applied @0.75ltr/10sqm of approved brand or manufacture. Manufacture

Painting steel work with Deluxe Multi Surface Paint of required shade.Two or more coat applied @0.90ltr/10sqm wiyhout priming coat of approved brand or manufacture.

S/F of glass paneswith putty & nails whereever necessary Float glass panes of thickness 4mm

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.75 mm diameter

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Bend 87.5° 75 mm bend

Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections.

S/F of sign board.

MS mahaveer construction