Tender for Attend the cable fault at site FROM RECIVING the message from CONCERN S/DN ( Fault not to be located & XLPE cable will be supplied by DGVCL) with cable end termination and straight through joints kits (to be supplied by contractor) as per norms in case of Emergency for Kadodara1 ,Kadodara Ind & Palsana Sub division under Kadodara Division.

(Name of Work:- Tender for Attend the cable fault at site FROM RECIVING

the message from CONCERN S/DN ( Fault not to be located & XLPE cable

will be supplied by DGVCL) with cable end termination and straight

through joints kits (to be supplied by contractor) as per norms in case of

Emergency for Kadodara-1 ,Kadodara Ind & Palsana Sub division under Ka-

dodara Division.

Sr. Item Code Amo

Description Unit tal Rate

Labour charge for excavation of cable Me-

trench of 400mm width x 1200mm ter

depth, in any type of soil for laying of

1 9925000001 cable of size up to 240 mm2 (For addi-

tional cable 200 mm additional width

shall be considered i.e. half trench

length is to be considered

Labour charge for excavation of cable Me-

trench of 600mm width x 1200mm ter

depth, in any type of soil for laying of

2 9925000002 cable of size up to 240 mm2 (For addi-

tional cable 200 mm additional width

shall be considered i.e. half trench

length is to be considered

Labour charge for excavation of cable Me-

trench of 400mm width x 1500mm ter

depth, in any type of soil for laying of

3 9925000003 cable of size up to 240 mm2 (For addi-

tional cable 200 mm additional width

shall be considered i.e. half trench leng

th is to be considered

Labour charge for laying of 11kV / 22 Me-

kV XLPE Cable of size up to 240 mm2 ter

& preparation of sand layer 100mm

thick, in the cable trench & covering

the cable with 150 mm dia (Outer),

thickness 25 mm, 1.0 meter long RCC

half round muffs and providing and

fixing of 4inch width yellow colour

polyethylene tape with print-

ing"CAUTION ELECTRIC CABLE BE-

LOW' at 0.75 m depth from ground

surface after laying cable in trench.

This will provide indication that elec-

tric cable is passing underground so as

to protect cable from mechanical inju-

ries, refilling the same, as per Instruc-

tion of E gineer in Charge (EIC) .

Labour charge for horizontal drilling Me-

using Auger machine without damage ter

to surface road at max 2.0 mtrs depth

& putting of 6.11 kg/cm2 , class-

4,Green color, 110mm 0.D. 8.5mm

thickness H.D.P.E. pipe confirms to IS

4984-1987(3rd revision) and BIS cer-

tification and laying of 11KV/22KV

XLPE cable of size up to 240 mm2 in

5 9925000005 HDPE pipe, as per Site Condition (ex-

cluding cost of pipe). The detail map

obtained from HDD machine and excel

sheet hard and soft copy) indicating

the respective depth and distance

from adjacent landmark for each seg-

ment for HDD is must require to be

submitted. HDD to be carried out at

depth 1.5 mtrs to 2.0 mtrs as per site

conditions and as er instruction of EIC.

Labour charge for horizontal drilling Me-

manually without damage to surface ter

road at max 2.0 mtrs depth & putting

of 6.11 kg/cm2 , class-4,Green color,

110mm O.D. , 8.5mm thickness

H.D.P.E. pipe confirms to IS 4984-

1987(3rd revision) and BIS certifica-

6 9925000006 tion and laying of 11KV/22KV XLPE

cable of size up to 240 mm2 size, as

per Site Condition (excluding cost of

pipe). The detail map and excel sheet

(hard and soft copy) indicating the re-

spective depth and distance from adja-

cent landmark for each segment of ca-

ble to be submitted. Drilling to be car-

ried out at depth Minimum 1.2 mtrs to

2.0 mtrs as per site conditions as per

instruction of EIC.

Supply of 6.11kg/cm2 , class-4,Green Me-

color, 110mm O.D. , 8.5 mm thickness ter

H.D.P.E. pipe confirms to IS 4984 and

BIS certification for laying of under-

ground 11KV/ 22KV XLPE cable up to

Labour work for RCC concreting on CMT

disputed location and repairing of

damage portion of road crossing for

the work carried out for roads cross-

ing as well as concreting & muffing of

poles including all materials

Providing & fixing concrete stone No

route marker of 300 mm width x

mm thick x 650 mm height embedded

in earth at least 300 mm below &

mm above ground level respectively at

distance approx. 50 meters along the

length of cable. The RCC concreting

(1:2:4)(all necessary materials will be

in bidder's scope) of route marker is to

be carried out 300 mm width x

mm thick x 300 mm below ground lev-

el as per instruction of EIC. The route

marker should be with name of com-

pany with approved yellow colour-

DGVCL. The distance from marker to

cable and cable depth with feeder

name etc., marked with arrow sign is

to be painted on it. The route marker

is to be fixed at location near to any

fixed permanent location (not neces-

sary to fix exact on top of cable) as per

instruction of EIC.

Labour charge for erecting of 11kV / per-

22 kV XLPE cable of size up to 240 mm Job

2 on DP Structure with fixing of 02 Nos

polymer cleats on top and middle part.

Polymer cleats, nut bolts etc. fixing

material to be provided by contractor.

Providing & fixing of 6.11kg/cm2 , per-

class4,Green color, 110mm O.D. Job

8.5mm thickness H.D.P.E. pipe con-

firms to IS 4984 and BIS certification

on the erected DP structure for the

mechanical protection of cable by in-

serting the cable inside HDPE pipe.

The HDPE pipe shall be erected in such

a way that 300mm shall be below the

ground level and the rest 2700 mm

shall be supported on the DP Structure

with 01 No Polymer cleat. All materials

including polymer cleat and Nut bolt

to be provided by contractor.

Providing and fixing of pipe type No

earthing from 80 mm dia class-B GI

pipe with pit to be filled with salt &

coke and construction of chamber as

per DGVCL Drg. No. dg /100 for DP

and cable. The earthing pit should be

joined with cable by G.I. strip of size 1"

width & 2 mm thick. All material GI

pipe, Coke Salt etc will be supplied by

Supply & fixing of heat shrink type end No

terminations (outdoor) for up to 11kV

3C x 185 mm2 size XLPE cable as per

DGVCL technical s ecification

Supply & fixing of heat & shrinkable No

end terminations (outdoor) for up to

22 kV 3C x 185 mm 2 size XLPE cable (

as per DGVCL technical specification)

Supply & fixing of heat shrinkable type No

end terminations (indoor) for up to

11kV 3C x 185 mm 2 size XLPE cable

as per DGVCL technical specification

Supply & fixing of heat & shrinkable No

end terminations (indoor) for up to

kV 3C x 185 mm 2 size XLPE cable as

per DGVCL technical specification

Supply & fixing of heat shrinkable No

straight through joint for up to 11kV

3C x 185 mm 2 size XLPE cables as per

DGVCL technical specification.

Supply & fixing of heat shrinkable No

straight through joint type for up to

22kV 3C x 185 mm 2 size XLPE cable

as per DGVCL technical specification

Labour charge for excavation of No

2100mm long x 1200mm wide x

mm deep joint pits for installation of

11kV / 22kV Straight through joints as

19 9925000023 per instruction of engineer-in-charge

& covering the cable with 150 mm dia

(Outer), thickness 25 mm, 1.0 meter

long RCC half round muffs & refilling

same as per instruction of EIC .

Providing and fixing of insulating bus No

bar, made from 11KV/22KV XLPE ca-

ble after removal of semi conducting

layer and applying of PVC heat shrink-

able antitracking core insulating tub-

ing (1.1KV), on both end terminal us-

ing Aluminium long barrel heavy duty

up to 240 sq mm lugs, Aluminium bus

connector. Taping with PGclamp for

bus conductor as per drawing and as

per instruction of EIC. The Allurninium

lugs and PG clamp shall be covered

with 11KV/22KV HT insulating

tapes.(11KV/22KV XLPE cable will be

in scope of DGVCL while all other ma-

terials will be in bidder's scope.

Testing of cable at various points and No

commissioning the feeder as per in-

21 9925000025 struction of engineer-in-charge.Test

result shall be submitted by contractor

Preparation and submission of 6 (six) Set

copies, of complete layout drawings

with GIS mapping as per actual cable

routing showing road crossing, HDPE

pipe sleeving, jointing locations, mark-

9925000047 Laying of any size of 11/ 22 KV XLPE per

/PILCCable in readymade trench or in cable

TOTAL AMOUNT :-TEN Lac Only (Excluding GST

TOTAL AMOUNT :-TEN Lac Only (Excluding GST

Executive Engineer

Kadodara Division