Loading
Loading…
Loading…
Tender Value
Refer Docs
EMD Value
₹50,000
Closing Date
5 Oct 2026, 5:30 pm
Karnataka Power Corporation Limited
Ramanna
Repair/Rectification of HT/LT overhead line and Rewinding/Repair of Ceiling, Wall mounting and Pedestal fans for a period of 12 months
KPCL/2026-27/PS/WORK_INDENT4799
KPCL/2026-27/PS/WORK_INDENT4799
Open
Power stations
Two Tender Document System(Two Cover)
KPCL Executive Engineer PPS Office RTPS Raichur
4 documents required · 0 mandatory · 4 optional
Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs. xxxxx Lakhs)
Satisfactoriy completed (atleast 90%) as prime contractor at-least one such similar work of value not less than Rs. xxxxxxx (80% of estimated cost of tender)
Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Total value of civl engineering works executed and payments received in the last five years (year-wise)
List of existing commitments and ongoing works
List of works for which tenders already submitted
Banker Details for reference
Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded
Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years
Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded
Proposals for subcontracting components of works amounting to more than 20% of the contract price (for each, the qualifications and experience of the identified sub-contractor in the relevant fields should be attached)
Intending Bidder should have satisfactorily completed as a prime contractor, at least one similar work in the field of supply, installation of electrical accessories and Supply Installation of overhead line accessories in any Thermal power plants of value not less than Rs.12.80 lakhs, in the preceding five financial years (2021-22, 2022-23, 2023-24, 2024-25 and 2025-26). As a proof of this the bidder shall upload work order and relevant work done certificate issued by an officer of the rank of Chief Engineer or competent authority.(Work done of previous years shall be given weightage of 10 percent per year to bring them to the present price level of the financial year).
Intending Bidder shall be Class-I or above electrical contractor. As a proof of this, valid Electrical license issued by Govt. of Karnataka shall be furnished.
The intending bidder in his name should have achieved an average financial turnover of Rs. 25.60 lakhs in at least two financial years during the last five years (2021-22, 2022-23, 2023-24, 2024-25 and 2025-26). As a proof of this, the bidder shall upload copies of profit & loss account statement or turnover certificate duly certified by chartered accountant.(Financial turnover for previous years will be given weightage of 10% per year to bring them to the present price level of the financial year).
₹570
₹50,000
21 Sept 2026
21 Sept 2026
7 Oct 2026
29 Sept 2026
Repair/Rectification of HT/LT overhead line and Rewinding/Repair of Ceiling, Wall mounting and Pedestal fans for a period of 12 months
Re-winding /Repair/Replacement of bearings, Bushes and shafts etc., for Ceiling Fans /Wall mounting Fans/Exhaust Fan in RTPS Plant.
Digging of trench of 0.6m deep x 0.50 mtr wide refilling the trench to the required ground level and consolidating etc., complete.(As per Civil SR KSRB I-2, P-7)In soil (ordinary)
Digging of trench of 0.6m deep x 0.50 mtr wide refilling the trench to the required ground level and consolidating etc., complete.(As per Civil SR KSRB I-2, P-7)In soil (hard)
Providing and filling sand in excavated trench to cover already laid UG cable to a depth of 150mm all-round the cable.
Supply of Burnt Bricks:
Laying burnt bricks
Supplying of RCC Pole - 9 M Long, 145 Kg WL (Dwg. No. BESCOM/GM/QS&S/02 Dt: 24.11.2018) as per IS - 785,
Erection of RCC/PSC poles 9 to 10 mtr long but in a pit of 1.8 mtr deapth. Labour Charge Complete (Including Erection, Excavation & Fixing)
Supplying of 11KV cross arm - GI with HT Top support (Glass rein forced hot pressed SMC compound)
Supply of LT 4 Pin Cross Arm - GI COMMON SR 2021-2022,P- 1,SL No.16, I- 2.06
Supplying Guy Wire & GI Wire as per IS-2141;7/10 SWG Guy Wire
(7/3.251 mm Dia), Std Wt: 680 Kg/KM
Supply of Guy Clamp - GI
Supply of Turn Buckle (GI)
(Dwg No. BESCOM/GM/QS&S/07 Dtd 24.11.2018)
Supply of Anchor Rod using 12 mm rounds/Guy Rod - GI
Supply of Insulator as per IS-1445 for Ceremic, IS- 7935 for GI Pin, IEC-61109 for Polymeric;1.1 kV Polymeric Pin Insulator
Supplying of No. 8 strain insulaters.
Digging of Pit 1.8 Mtr depth for errection of 9 to 10 Mtr Long Steel/RCC/PSCC supports as per approved Drawing.Ordinary soil.
Digging of Pit 1.8 Mtr depth for errection of 9 to 10 Mtr Long Steel/RCC/PSCC supports as per approved Drawing.Hard soil
Supply of 11 kV, DOLO Cutout REC Specification (Dwg No. BESCOM/GM/QS&S/20 Dtd 24.11.2018). 3 set
Fixing of DOLO, GOS, LA, Fuse Board, Service Mains, Spacer, Insulator Etc.,:Fixing DOLO Cutout/Horn Gap Fuse including fixing of cross arm and wiring.
Supplying of 11KV, 200 Amps single break GOS (Dwg. No. BESCOM/GM/QS&S/23 Dt: 24.11.2018)
Fixing of DOLO, GOS, LA, Fuse Board, Service Mains, Spacer, Insulator Etc.,:Fixing of GOS including wiring (11 kV Single Break 200 Amps)
Supplying and making 11KV (E) Extruded "X" linked for tubing & moulded & cross-linked components using Heat Shrink Stress Control tube having High Permittivity XLPE Terminations- INDOOR & OUTDOOR JOIN...
Supplying 11 kV, Jointing & Cable Termination Kit as per IS-13573: Heat Shrinkable Straight Through Jointing Kit for XLPE Cable with Copper Lug & Al Ferrule of: 3core X400 sqmm .Maake Raychem only.
Labour charges for Making HT Cable Jointig Stright or End Termination indoor or out door details of rates worked out is as follows. ( for Seperate 1 no. joint mazdoors 4 Nos to be...
Dismantling and Re-erection of 16M /30M high mast, lighting fitting using Hydro/Crane
Supply and Replacement of steel wire rope by new stainless steel wire rope 80 Mtr 6mm with accessories Make:Usha martin /TATA
Replacement of 5 core 6Sq mm flexible copper cable (40 Mtr for each Mast) Make:Polycab/Havel /KEI/V guard only
Release and reconditioning of high mast light fitting, Repair/rewinding /reconditioning and replacement of Motor and gear wheel, Re-erection of High mast light etc.
Supplying of ACSR conductors as IS 398 (Part-2/1996) Rabbit ACSR (6/3.35mm Al + 1/3.35mm St.), Std. Wt. : 214 Kgs/Km.
Releasing & Restringing of loose spans, binding, straightening of inclined Pole etc.Straightening of Slant/Bent Pole.75% of the 8 Mtr. RCC Pole erection charges .(1113*75%=834.75)
Stringing of conductor Squirrel, Weasel, binding of conductor on each insulator and dead ending on strain or disc/strain insulator by means of clamps.for Rabbit ACSR.
Emergency power supply line faults/ break down works in RTPS Plant for 440V LT /6.6KV, 11KV HT line/Cable works. Separate Man Power to be deployed as when & require (2 Electricians + 3 Ma...
Detection of Cable fault location for 11KV ,3C,400 sqmm cable of colony feeder F2 & Spare cable
Vehicle charges(including all aplicable taxes & GST 5%)
Labour charges for HT/LT line maintenance
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
Bid Document new.doc
Tender Document • 0.36 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .