REPAIR REPLACEMENT AND MAINT OF SUMMER APPLIANCES INCLUDING REPLACEMENT OF WORN OUT ACCESSORIES OF CEILING FAN EXHAUST FAN PEDESTAL FAN AIR CIRCULATOR AND GEYSER AT MIL STN AGARTALA

Amount

Schedule'A' Part-I: E&M works

Taking down unserviceable ceiling fans, exhaust fans, wall mounting fans,Padestal fan/table fan any sweep and size from its location by disconnecting and sealing all electrical lines for inspection of serviceability for annual painting/maintenance/servicing by oiling, greasing replacement of condenser, ball bearing/bushes as required at site of the fan and including spray painting with one coat of synthetic enamel paint of approved colour and keep take side of u/s fan for carried out repair at workshop and refixing /reconnected the same as its original place connecting all electrical connections with existing size twin twisted copper conductor cable from ceiling rose/connector to fan and testing complete all as specified and directed. (NOTE (a) New parts i.e. condenser ball bearing/bushes/New flexible wire shall be measured and paid separately under ''Supply only'' rates here-in-after. (b) Minor parts, if any, not mentioned in the schedule but required for smooth functioning of fans are deemed to be included in the rate of the item.

Taking out burnt windings from the under mentioned fans of any sweep, make and size, cleaning of slots, providing new insulation within slots and winding with new super enamelled copper wire of suitable gauge not less than the weight mentioned under concerned items including heat varnishing, backing and testing complete all as specified and directed.

(a) Ceiling fan of 1400mm sweep (Super enamelled copper wire not less than 420gm)

(b) Ceiling fan of 1200mm sweep (Super enamelled copper wire not less than 380gm)

(c) Exhaust fan of 380mm sweep (Super enamelled copper wire not less than 320gm)

(d) Exhaust fan of 300mm sweep (Super enamelled copper wire not less than 280gm)

(e) Air circulator fan 400mm sweep (Super enamelled copper wire not less than 550gm)

(f) Air circulator fan 610mm sweep (Super enamelled copper wire not less than 950gm)

(g) Pedestal fan of 400mm sweep (Super enamelled copper wire not less than 350gm)

(h) Table fan of 300mm sweep (Super enamelled copper wire not less than 280gm)

Supply only ball bearing of the following sizes: (Make : SKF/NBC)

Supply only gun metal bush of appropriate sizes.

Supply only condenser 2.5 mfd. (Make: Bajaj/Capcab/tipcon/universal)

Supply condenser clamp.

Supply only PVC ceiling fan canopy (set of two) (Make : Usha/Bajaj/Orient)

Supply only rubber bush for ceiling fan.

Supply only ceiling fan hanging clamp made of mild steel sheet with bolts ,nuts, washers and safety pin.

Supply only pedestal fan canopy.

Supply only PVC insulated multistranded copper conductor flexible twin core of size 40/0.0076.

(a) M & L for painting of ceiling fan 1200/1400 mm sweep complete with blade and down rod after rewinding the motor with one coats of synthetic enamel paint, white, by spraying including filling cavities with filler after scrubbing down all paying using emery paper, cleaning , washing etc. and writing mes no. complete all as specified and directed.

(b) -ditto- all as above but exhaust fan 380/300mm sweep complete with blade & bracket etc.

(c) -ditto- all as above but wall mounting/pedestal fan/table fan complete with blade and jalli frame etc complete

(d) -ditto-all as above but air circulator fan of 400/610mm sweep complete with blade, bracket & Jalli etc

Supply only three pin top 15 Amp AC 230V. Make Anchor/Key

M&L for fixing of exhaust fan/air circular fan in existing wall with provide suitable size of fastener to hold the fan complete all as directed.

Taking down unserviceable geysers of any capacity and make from each location by disconnecting and ceiling all electrical and water lines for annual maintenance/servicing/overhauling, dismantling the same for repair/replacement of unserviceable parts, including brazing to inner tank, cleaning, taking out sludge from inner tank and washing with cleaning solution and reassembling and refixing the same in each original location/position, connecting all electrical and water connections including provn of 2.5Sqmm 3 core sheathed multi-stranded copper conductor flexible cable from connector block to geyser and testing complete all as specified and directed. (Note (a) New parts shall be measured and paid separately under "Supply only" rates here-in-after. (b) Minor parts , if any, not mentioned in the schedule but required for smooth functioning of geyser are deemed to be included in the unit rate of the item.

Supply only PVC inlet pipe, 15mm bore, 450mm long including both end check/end nuts and washers. Make - Prayag/ Royal/Puspa

Supply only PVC steel braided outlet connection pipe, 15mm bore, 450mm long including both ends check nut & washer complete.

Supply only heating element of any type 1500 Watts. (Make : Bajaj/Racold/Venus)

Supply only heating element of any type 2000 Watts. (Make : Bajaj/Racold/Venus)

Supply only thermostat of any type suitable for 50/35/25 ltrs capacity geyser.

Supply only internal assembly complete with packing ring,bolts, nuts & washers suitable for 25 ltrs capacity geyser.

Supply only thermal cut off ISI marked suitable for 50/35/25 ltrs capacity geyser.

Supply only fusible plug made of brass having lead alloy fuse suitable for 50/35/25 ltrs capacity geyser.

M & L for painting Geyser of capacity 35/25 Ltrs complete, in situ, with two coats of synthetic enamel paint, white, by spraying including filling cavities with filler, denting after scrubbing down old paint using emery paper, cleaning, washing etc. and writing MES No. complete all as specified and directed.

SHRI RAJESH DEY

SHRI CHANDAN CHANDA

M/S NIYATI NETWORK